//==========================================================================
//
//
//
//==========================================================================
void GLSprite::Draw(int pass)
{
if (pass!=GLPASS_PLAIN && pass != GLPASS_ALL && pass!=GLPASS_TRANSLUCENT) return;
// Hack to enable bright sprites in faded maps
uint32 backupfade = Colormap.FadeColor.d;
if (gl_spritebrightfog && fullbright)
Colormap.FadeColor = 0;
bool additivefog = false;
int rel = extralight*gl_weaponlight;
if (pass==GLPASS_TRANSLUCENT)
{
// The translucent pass requires special setup for the various modes.
// Brightmaps will only be used when doing regular drawing ops and having no fog
if (!gl_spritebrightfog && (!gl_isBlack(Colormap.FadeColor) || level.flags&LEVEL_HASFADETABLE ||
RenderStyle.BlendOp != STYLEOP_Add))
{
gl_RenderState.EnableBrightmap(false);
}
gl_SetRenderStyle(RenderStyle, false,
// The rest of the needed checks are done inside gl_SetRenderStyle
trans > 1.f - FLT_EPSILON && gl_usecolorblending && gl_fixedcolormap < CM_FIRSTSPECIALCOLORMAP && actor &&
fullbright && gltexture && !gltexture->GetTransparent());
if (hw_styleflags == STYLEHW_NoAlphaTest)
{
gl_RenderState.EnableAlphaTest(false);
}
else
{
gl_RenderState.AlphaFunc(GL_GEQUAL,trans*gl_mask_sprite_threshold);
}
if (RenderStyle.BlendOp == STYLEOP_Fuzz)
{
float fuzzalpha=0.44f;
float minalpha=0.1f;
// fog + fuzz don't work well without some fiddling with the alpha value!
if (!gl_isBlack(Colormap.FadeColor))
{
float xcamera=FIXED2FLOAT(viewx);
float ycamera=FIXED2FLOAT(viewy);
float dist=Dist2(xcamera,ycamera, x,y);
if (!Colormap.FadeColor.a) Colormap.FadeColor.a=clamp<int>(255-lightlevel,60,255);
// this value was determined by trial and error and is scale dependent!
float factor=0.05f+exp(-Colormap.FadeColor.a*dist/62500.f);
fuzzalpha*=factor;
minalpha*=factor;
}
gl_RenderState.AlphaFunc(GL_GEQUAL,minalpha*gl_mask_sprite_threshold);
gl.Color4f(0.2f,0.2f,0.2f,fuzzalpha);
additivefog = true;
}
else if (RenderStyle.BlendOp == STYLEOP_Add && RenderStyle.DestAlpha == STYLEALPHA_One)
{
additivefog = true;
}
}
if (RenderStyle.BlendOp!=STYLEOP_Fuzz)
{
if (actor)
{
lightlevel = gl_SetSpriteLighting(RenderStyle, actor, lightlevel, rel, &Colormap, ThingColor, trans,
fullbright || gl_fixedcolormap >= CM_FIRSTSPECIALCOLORMAP, false);
}
else if (particle)
{
if (gl_light_particles)
{
lightlevel = gl_SetSpriteLight(particle, lightlevel, rel, &Colormap, trans, ThingColor);
}
else
{
gl_SetColor(lightlevel, rel, &Colormap, trans, ThingColor);
}
}
else return;
}
if (gl_isBlack(Colormap.FadeColor)) foglevel=lightlevel;
if (RenderStyle.Flags & STYLEF_FadeToBlack)
{
Colormap.FadeColor=0;
additivefog = true;
}
if (RenderStyle.Flags & STYLEF_InvertOverlay)
{
Colormap.FadeColor = Colormap.FadeColor.InverseColor();
additivefog=false;
}
gl_SetFog(foglevel, rel, &Colormap, additivefog);
if (gltexture) gltexture->BindPatch(Colormap.colormap,translation);
else if (!modelframe) gl_RenderState.EnableTexture(false);
if (!modelframe)
{
// [BB] Billboard stuff
const bool drawWithXYBillboard = ( !(actor && actor->renderflags & RF_FORCEYBILLBOARD)
//&& GLRenderer->mViewActor != NULL
&& (gl_billboard_mode == 1 || (actor && actor->renderflags & RF_FORCEXYBILLBOARD )) );
gl_RenderState.Apply();
gl.Begin(GL_TRIANGLE_STRIP);
if ( drawWithXYBillboard )
{
// Rotate the sprite about the vector starting at the center of the sprite
// triangle strip and with direction orthogonal to where the player is looking
// in the x/y plane.
float xcenter = (x1+x2)*0.5;
float ycenter = (y1+y2)*0.5;
float zcenter = (z1+z2)*0.5;
float angleRad = DEG2RAD(270. - float(GLRenderer->mAngles.Yaw));
Matrix3x4 mat;
mat.MakeIdentity();
mat.Translate( xcenter, zcenter, ycenter);
mat.Rotate(-sin(angleRad), 0, cos(angleRad), -GLRenderer->mAngles.Pitch);
mat.Translate( -xcenter, -zcenter, -ycenter);
Vector v1 = mat * Vector(x1,z1,y1);
Vector v2 = mat * Vector(x2,z1,y2);
Vector v3 = mat * Vector(x1,z2,y1);
Vector v4 = mat * Vector(x2,z2,y2);
if (gltexture)
{
gl.TexCoord2f(ul, vt); gl.Vertex3fv(&v1[0]);
gl.TexCoord2f(ur, vt); gl.Vertex3fv(&v2[0]);
gl.TexCoord2f(ul, vb); gl.Vertex3fv(&v3[0]);
gl.TexCoord2f(ur, vb); gl.Vertex3fv(&v4[0]);
}
else // Particle
{
gl.Vertex3fv(&v1[0]);
gl.Vertex3fv(&v2[0]);
gl.Vertex3fv(&v3[0]);
gl.Vertex3fv(&v4[0]);
}
}
else
{
if (gltexture)
{
gl.TexCoord2f(ul, vt); gl.Vertex3f(x1, z1, y1);
gl.TexCoord2f(ur, vt); gl.Vertex3f(x2, z1, y2);
gl.TexCoord2f(ul, vb); gl.Vertex3f(x1, z2, y1);
gl.TexCoord2f(ur, vb); gl.Vertex3f(x2, z2, y2);
}
else // Particle
{
gl.Vertex3f(x1, z1, y1);
gl.Vertex3f(x2, z1, y2);
gl.Vertex3f(x1, z2, y1);
gl.Vertex3f(x2, z2, y2);
}
}
gl.End();
}
else
{
gl_RenderModel(this, Colormap.colormap);
}
if (pass==GLPASS_TRANSLUCENT)
{
gl_RenderState.EnableBrightmap(true);
gl_RenderState.BlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
gl_RenderState.BlendEquation(GL_FUNC_ADD);
gl_RenderState.SetTextureMode(TM_MODULATE);
// [BB] Restore the alpha test after drawing a smooth particle.
if (hw_styleflags == STYLEHW_NoAlphaTest)
{
gl_RenderState.EnableAlphaTest(true);
}
else
{
gl_RenderState.AlphaFunc(GL_GEQUAL,gl_mask_sprite_threshold);
}
}
// End of gl_sprite_brightfog hack: restore FadeColor to normalcy
if (backupfade != Colormap.FadeColor.d)
Colormap.FadeColor = backupfade;
gl_RenderState.EnableTexture(true);
}
/*
===============
UI_DrawPlayerII
A less FOV stretched version for drawing on the main menu
===============
*/
void UI_DrawPlayerII( float x, float y, float w, float h, playerInfo_t *pi, int time ) {
refdef_t refdef;
refEntity_t legs;
refEntity_t torso;
refEntity_t head;
refEntity_t gun;
refEntity_t barrel;
refEntity_t flash;
vec3_t origin;
int renderfx;
vec3_t mins = {-16, -16, -24};
vec3_t maxs = {16, 16, 32};
float len;
float xx;
if ( !pi->legsModel || !pi->torsoModel || !pi->headModel || !pi->animations[0].numFrames ) {
return;
}
// this allows the ui to cache the player model on the main menu
if (w == 0 || h == 0) {
return;
}
dp_realtime = time;
if ( pi->pendingWeapon != -1 && dp_realtime > pi->weaponTimer ) {
pi->weapon = pi->pendingWeapon;
pi->lastWeapon = pi->pendingWeapon;
pi->pendingWeapon = -1;
pi->weaponTimer = 0;
if( pi->currentWeapon != pi->weapon ) {
trap_S_StartLocalSound( weaponChangeSound, CHAN_LOCAL );
}
}
UI_AdjustFrom640( &x, &y, &w, &h );
y -= jumpHeight;
memset( &refdef, 0, sizeof( refdef ) );
memset( &legs, 0, sizeof(legs) );
memset( &torso, 0, sizeof(torso) );
memset( &head, 0, sizeof(head) );
refdef.rdflags = RDF_NOWORLDMODEL;
AxisClear( refdef.viewaxis );
refdef.x = x;
refdef.y = y;
refdef.width = w;
refdef.height = h;
refdef.fov_x = (int)((float)refdef.width / 640.0f * 30.0f);
xx = refdef.width / tan( refdef.fov_x / 360 * M_PI );
refdef.fov_y = atan2( refdef.height, xx );
refdef.fov_y *= ( 360 / (float)M_PI );
// calculate distance so the player nearly fills the box
len = 0.7 * ( maxs[2] - mins[2] );
origin[0] = len / tan( DEG2RAD(refdef.fov_x) * 0.93 );
origin[1] = 1.0 * ( mins[1] + maxs[1] );
origin[2] = -2.7 * ( mins[2] + maxs[2] );
refdef.time = dp_realtime;
trap_R_ClearScene();
// get the rotation information
UI_PlayerAngles( pi, legs.axis, torso.axis, head.axis );
// get the animation state (after rotation, to allow feet shuffle)
UI_PlayerAnimation( pi, &legs.oldframe, &legs.frame, &legs.backlerp,
&torso.oldframe, &torso.frame, &torso.backlerp );
renderfx = RF_LIGHTING_ORIGIN;
//
// add the legs
//
legs.hModel = pi->legsModel;
legs.customSkin = pi->legsSkin;
VectorCopy( origin, legs.origin );
VectorCopy( origin, legs.lightingOrigin );
legs.renderfx = renderfx;
VectorCopy (legs.origin, legs.oldorigin);
trap_R_AddRefEntityToScene( &legs );
if (!legs.hModel) {
return;
}
//
// add the torso
//
torso.hModel = pi->torsoModel;
if (!torso.hModel) {
return;
}
torso.customSkin = pi->torsoSkin;
VectorCopy( origin, torso.lightingOrigin );
UI_PositionRotatedEntityOnTag( &torso, &legs, pi->legsModel, "tag_torso");
torso.renderfx = renderfx;
trap_R_AddRefEntityToScene( &torso );
//
// add the head
//
head.hModel = pi->headModel;
if (!head.hModel) {
return;
}
head.customSkin = pi->headSkin;
VectorCopy( origin, head.lightingOrigin );
UI_PositionRotatedEntityOnTag( &head, &torso, pi->torsoModel, "tag_head");
head.renderfx = renderfx;
trap_R_AddRefEntityToScene( &head );
//
// add the gun
//
if ( pi->currentWeapon != WP_NONE ) {
memset( &gun, 0, sizeof(gun) );
gun.hModel = pi->weaponModel;
VectorCopy( origin, gun.lightingOrigin );
UI_PositionEntityOnTag( &gun, &torso, pi->torsoModel, "tag_weapon");
gun.renderfx = renderfx;
trap_R_AddRefEntityToScene( &gun );
}
//
// add the spinning barrel
//
if ( pi->realWeapon == WP_MACHINEGUN || pi->realWeapon == WP_GAUNTLET || pi->realWeapon == WP_BFG ) {
vec3_t angles;
memset( &barrel, 0, sizeof(barrel) );
VectorCopy( origin, barrel.lightingOrigin );
barrel.renderfx = renderfx;
barrel.hModel = pi->barrelModel;
angles[YAW] = 0;
angles[PITCH] = 0;
angles[ROLL] = UI_MachinegunSpinAngle( pi );
if( pi->realWeapon == WP_GAUNTLET || pi->realWeapon == WP_BFG ) {
angles[PITCH] = angles[ROLL];
angles[ROLL] = 0;
}
AnglesToAxis( angles, barrel.axis );
UI_PositionRotatedEntityOnTag( &barrel, &gun, pi->weaponModel, "tag_barrel");
trap_R_AddRefEntityToScene( &barrel );
}
//
// add muzzle flash
//
if ( dp_realtime <= pi->muzzleFlashTime ) {
if ( pi->flashModel ) {
memset( &flash, 0, sizeof(flash) );
flash.hModel = pi->flashModel;
VectorCopy( origin, flash.lightingOrigin );
UI_PositionEntityOnTag( &flash, &gun, pi->weaponModel, "tag_flash");
flash.renderfx = renderfx;
trap_R_AddRefEntityToScene( &flash );
}
// make a dlight for the flash
if ( pi->flashDlightColor[0] || pi->flashDlightColor[1] || pi->flashDlightColor[2] ) {
trap_R_AddLightToScene( flash.origin, 200 + (rand()&31), pi->flashDlightColor[0],
pi->flashDlightColor[1], pi->flashDlightColor[2] );
}
}
//
// add the chat icon
//
if ( pi->chat ) {
UI_PlayerFloatSprite( pi, origin, trap_R_RegisterShaderNoMip( "sprites/balloon3" ) );
}
//
// add an accent light
//
origin[0] -= 100; // + = behind, - = in front
origin[1] += 100; // + = left, - = right
origin[2] += 100; // + = above, - = below
//trap_R_AddLightToScene( origin, 500, 0.3, 0.2, 0.8 );
origin[0] += 10; // + = behind, - = in front
origin[1] += 80; // + = left, - = right
origin[2] += 130; // + = above, - = below
trap_R_AddLightToScene( origin, 250, 0.54, 0.89, 0.79 );
origin[0] -= 50; // + = behind, - = in front
origin[1] -= 90; // + = left, - = right
origin[2] -= 69; // + = above, - = below
trap_R_AddLightToScene( origin, 350, 0.60, 0.03, 0.22 );
origin[0] -= 100;
origin[1] -= 100;
origin[2] -= 100;
//trap_R_AddLightToScene( origin, 500, 0.8, 0.2, 0.1 );
// UI_ForceLegsAnim( pi, BOTH_POSE ); // leilei - pose hack
// UI_ForceTorsoAnim( pi, BOTH_POSE );
trap_R_RenderScene( &refdef );
}
bool QgsSimpleMarkerSymbolLayerV2::prepareShape()
{
mPolygon.clear();
if ( mName == "square" || mName == "rectangle" )
{
mPolygon = QPolygonF( QRectF( QPointF( -1, -1 ), QPointF( 1, 1 ) ) );
return true;
}
else if ( mName == "diamond" )
{
mPolygon << QPointF( -1, 0 ) << QPointF( 0, 1 )
<< QPointF( 1, 0 ) << QPointF( 0, -1 );
return true;
}
else if ( mName == "pentagon" )
{
mPolygon << QPointF( sin( DEG2RAD( 288.0 ) ), - cos( DEG2RAD( 288.0 ) ) )
<< QPointF( sin( DEG2RAD( 216.0 ) ), - cos( DEG2RAD( 216.0 ) ) )
<< QPointF( sin( DEG2RAD( 144.0 ) ), - cos( DEG2RAD( 144.0 ) ) )
<< QPointF( sin( DEG2RAD( 72.0 ) ), - cos( DEG2RAD( 72.0 ) ) )
<< QPointF( 0, -1 );
return true;
}
else if ( mName == "triangle" )
{
mPolygon << QPointF( -1, 1 ) << QPointF( 1, 1 ) << QPointF( 0, -1 );
return true;
}
else if ( mName == "equilateral_triangle" )
{
mPolygon << QPointF( sin( DEG2RAD( 240.0 ) ), - cos( DEG2RAD( 240.0 ) ) )
<< QPointF( sin( DEG2RAD( 120.0 ) ), - cos( DEG2RAD( 120.0 ) ) )
<< QPointF( 0, -1 );
return true;
}
else if ( mName == "star" )
{
double sixth = 1.0 / 3;
mPolygon << QPointF( 0, -1 )
<< QPointF( -sixth, -sixth )
<< QPointF( -1, -sixth )
<< QPointF( -sixth, 0 )
<< QPointF( -1, 1 )
<< QPointF( 0, + sixth )
<< QPointF( 1, 1 )
<< QPointF( + sixth, 0 )
<< QPointF( 1, -sixth )
<< QPointF( + sixth, -sixth );
return true;
}
else if ( mName == "regular_star" )
{
double inner_r = cos( DEG2RAD( 72.0 ) ) / cos( DEG2RAD( 36.0 ) );
mPolygon << QPointF( inner_r * sin( DEG2RAD( 324.0 ) ), - inner_r * cos( DEG2RAD( 324.0 ) ) ) // 324
<< QPointF( sin( DEG2RAD( 288.0 ) ) , - cos( DEG2RAD( 288 ) ) ) // 288
<< QPointF( inner_r * sin( DEG2RAD( 252.0 ) ), - inner_r * cos( DEG2RAD( 252.0 ) ) ) // 252
<< QPointF( sin( DEG2RAD( 216.0 ) ) , - cos( DEG2RAD( 216.0 ) ) ) // 216
<< QPointF( 0, inner_r ) // 180
<< QPointF( sin( DEG2RAD( 144.0 ) ) , - cos( DEG2RAD( 144.0 ) ) ) // 144
<< QPointF( inner_r * sin( DEG2RAD( 108.0 ) ), - inner_r * cos( DEG2RAD( 108.0 ) ) ) // 108
<< QPointF( sin( DEG2RAD( 72.0 ) ) , - cos( DEG2RAD( 72.0 ) ) ) // 72
<< QPointF( inner_r * sin( DEG2RAD( 36.0 ) ), - inner_r * cos( DEG2RAD( 36.0 ) ) ) // 36
<< QPointF( 0, -1 ); // 0
return true;
}
else if ( mName == "arrow" )
{
mPolygon
<< QPointF( 0, -1 )
<< QPointF( 0.5, -0.5 )
<< QPointF( 0.25, -0.25 )
<< QPointF( 0.25, 1 )
<< QPointF( -0.25, 1 )
<< QPointF( -0.25, -0.5 )
<< QPointF( -0.5, -0.5 );
return true;
}
else if ( mName == "filled_arrowhead" )
{
mPolygon << QPointF( 0, 0 ) << QPointF( -1, 1 ) << QPointF( -1, -1 );
return true;
}
return false;
}
static QPointF _rotatedOffset( const QPointF& offset, double angle )
{
angle = DEG2RAD( angle );
double c = cos( angle ), s = sin( angle );
return QPointF( offset.x() * c - offset.y() * s, offset.x() * s + offset.y() * c );
}
/*
======================
BOEntity::Draw
======================
*/
void BOEntity::Draw(idDeviceContext *dc) {
if ( visible ) {
dc->DrawMaterialRotated( position.x, position.y, width, height, material, color, 1.0f, 1.0f, DEG2RAD(0.f) );
}
}
double QgsDistanceArea::computeDistanceBearing(
const QgsPoint& p1, const QgsPoint& p2,
double* course1, double* course2 )
{
if ( p1.x() == p2.x() && p1.y() == p2.y() )
return 0;
// ellipsoid
double a = mSemiMajor;
double b = mSemiMinor;
double f = 1 / mInvFlattening;
double p1_lat = DEG2RAD( p1.y() ), p1_lon = DEG2RAD( p1.x() );
double p2_lat = DEG2RAD( p2.y() ), p2_lon = DEG2RAD( p2.x() );
double L = p2_lon - p1_lon;
double U1 = atan(( 1 - f ) * tan( p1_lat ) );
double U2 = atan(( 1 - f ) * tan( p2_lat ) );
double sinU1 = sin( U1 ), cosU1 = cos( U1 );
double sinU2 = sin( U2 ), cosU2 = cos( U2 );
double lambda = L;
double lambdaP = 2 * M_PI;
double sinLambda = 0;
double cosLambda = 0;
double sinSigma = 0;
double cosSigma = 0;
double sigma = 0;
double alpha = 0;
double cosSqAlpha = 0;
double cos2SigmaM = 0;
double C = 0;
double tu1 = 0;
double tu2 = 0;
int iterLimit = 20;
while ( qAbs( lambda - lambdaP ) > 1e-12 && --iterLimit > 0 )
{
sinLambda = sin( lambda );
cosLambda = cos( lambda );
tu1 = ( cosU2 * sinLambda );
tu2 = ( cosU1 * sinU2 - sinU1 * cosU2 * cosLambda );
sinSigma = sqrt( tu1 * tu1 + tu2 * tu2 );
cosSigma = sinU1 * sinU2 + cosU1 * cosU2 * cosLambda;
sigma = atan2( sinSigma, cosSigma );
alpha = asin( cosU1 * cosU2 * sinLambda / sinSigma );
cosSqAlpha = cos( alpha ) * cos( alpha );
cos2SigmaM = cosSigma - 2 * sinU1 * sinU2 / cosSqAlpha;
C = f / 16 * cosSqAlpha * ( 4 + f * ( 4 - 3 * cosSqAlpha ) );
lambdaP = lambda;
lambda = L + ( 1 - C ) * f * sin( alpha ) *
( sigma + C * sinSigma * ( cos2SigmaM + C * cosSigma * ( -1 + 2 * cos2SigmaM * cos2SigmaM ) ) );
}
if ( iterLimit == 0 )
return -1; // formula failed to converge
double uSq = cosSqAlpha * ( a * a - b * b ) / ( b * b );
double A = 1 + uSq / 16384 * ( 4096 + uSq * ( -768 + uSq * ( 320 - 175 * uSq ) ) );
double B = uSq / 1024 * ( 256 + uSq * ( -128 + uSq * ( 74 - 47 * uSq ) ) );
double deltaSigma = B * sinSigma * ( cos2SigmaM + B / 4 * ( cosSigma * ( -1 + 2 * cos2SigmaM * cos2SigmaM ) -
B / 6 * cos2SigmaM * ( -3 + 4 * sinSigma * sinSigma ) * ( -3 + 4 * cos2SigmaM * cos2SigmaM ) ) );
double s = b * A * ( sigma - deltaSigma );
if ( course1 )
{
*course1 = atan2( tu1, tu2 );
}
if ( course2 )
{
// PI is added to return azimuth from P2 to P1
*course2 = atan2( cosU1 * sinLambda, -sinU1 * cosU2 + cosU1 * sinU2 * cosLambda ) + M_PI;
}
return s;
}
static void HandleEntityAdjustment(void)
{
char *value;
vec3_t origin, newOrigin, angles;
char temp[MAX_QPATH];
float rotation;
G_SpawnString("origin", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
if ( sscanf( value, "%f %f %f", &origin[0], &origin[1], &origin[2] ) != 3 ) {
G_Printf( "HandleEntityAdjustment: failed sscanf on 'origin' (%s)\n", value );
VectorClear( origin );
}
}
else
{
origin[0] = origin[1] = origin[2] = 0.0;
}
rotation = DEG2RAD(level.mRotationAdjust);
newOrigin[0] = origin[0]*cos(rotation) - origin[1]*sin(rotation);
newOrigin[1] = origin[0]*sin(rotation) + origin[1]*cos(rotation);
newOrigin[2] = origin[2];
VectorAdd(newOrigin, level.mOriginAdjust, newOrigin);
// damn VMs don't handle outputing a float that is compatible with sscanf in all cases
Com_sprintf(temp, sizeof( temp ), "%0.0f %0.0f %0.0f", newOrigin[0], newOrigin[1], newOrigin[2]);
AddSpawnField("origin", temp);
G_SpawnString("angles", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
if ( sscanf( value, "%f %f %f", &angles[0], &angles[1], &angles[2] ) != 3 ) {
G_Printf( "HandleEntityAdjustment: failed sscanf on 'angles' (%s)\n", value );
VectorClear( angles );
}
angles[YAW] = fmod(angles[YAW] + level.mRotationAdjust, 360.0f);
// damn VMs don't handle outputing a float that is compatible with sscanf in all cases
Com_sprintf(temp, sizeof( temp ), "%0.0f %0.0f %0.0f", angles[0], angles[1], angles[2]);
AddSpawnField("angles", temp);
}
else
{
G_SpawnString("angle", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
angles[YAW] = atof( value );
}
else
{
angles[YAW] = 0.0;
}
angles[YAW] = fmod(angles[YAW] + level.mRotationAdjust, 360.0f);
Com_sprintf(temp, sizeof( temp ), "%0.0f", angles[YAW]);
AddSpawnField("angle", temp);
}
// RJR experimental code for handling "direction" field of breakable brushes
// though direction is rarely ever used.
G_SpawnString("direction", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
if ( sscanf( value, "%f %f %f", &angles[0], &angles[1], &angles[2] ) != 3 ) {
G_Printf( "HandleEntityAdjustment: failed sscanf on 'direction' (%s)\n", value );
VectorClear( angles );
}
}
else
{
angles[0] = angles[1] = angles[2] = 0.0;
}
angles[YAW] = fmod(angles[YAW] + level.mRotationAdjust, 360.0f);
Com_sprintf(temp, sizeof( temp ), "%0.0f %0.0f %0.0f", angles[0], angles[1], angles[2]);
AddSpawnField("direction", temp);
AddSpawnField("BSPInstanceID", level.mTargetAdjust);
G_SpawnString("targetname", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("targetname", temp);
}
G_SpawnString("target", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("target", temp);
}
G_SpawnString("killtarget", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("killtarget", temp);
}
G_SpawnString("brushparent", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("brushparent", temp);
}
G_SpawnString("brushchild", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("brushchild", temp);
}
G_SpawnString("enemy", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("enemy", temp);
}
G_SpawnString("ICARUSname", NOVALUE, &value);
if (Q_stricmp(value, NOVALUE) != 0)
{
Com_sprintf(temp, sizeof( temp ), "%s%s", level.mTargetAdjust, value);
AddSpawnField("ICARUSname", temp);
}
}
void RBCamera::get_ortho(RBMatrix& out_mat) const
{
float h = _near_panel*RBMath::tan(DEG2RAD(_fovy));
out_mat = RBMatrix::get_ortho(0,h*_ratio , 0, h, _near_panel, _far_panel);
}
/**
* @brief execute autocruise
*/
void plan_run_AutoCruise()
{
PositionStateData positionState;
PositionStateGet(&positionState);
PathDesiredData pathDesired;
// re-use pathdesired that was setup correctly in setup stage.
PathDesiredGet(&pathDesired);
FlightModeSettingsPositionHoldOffsetData offset;
FlightModeSettingsPositionHoldOffsetGet(&offset);
float controlVector[4];
ManualControlCommandRollGet(&controlVector[0]);
ManualControlCommandPitchGet(&controlVector[1]);
ManualControlCommandYawGet(&controlVector[2]);
controlVector[3] = 0.5f; // dummy, thrust is normalized separately
normalizeDeadband(controlVector); // return value ignored
ManualControlCommandThrustGet(&controlVector[3]); // no deadband as we are using thrust for velocity
controlVector[3] = boundf(controlVector[3], 1e-6f, 1.0f); // bound to above zero, to prevent loss of vector direction
// normalize old desired movement vector
float vector[3] = { pathDesired.End.North - hold_position[0],
pathDesired.End.East - hold_position[1],
pathDesired.End.Down - hold_position[2] };
float length = sqrtf(vector[0] * vector[0] + vector[1] * vector[1] + vector[2] * vector[2]);
if (length < 1e-9f) {
length = 1.0f; // should not happen since initialized properly in setup()
}
vector[0] /= length;
vector[1] /= length;
vector[2] /= length;
// start position is advanced according to actual movement - in the direction of desired vector only
// projection using scalar product
float kp = (positionState.North - hold_position[0]) * vector[0]
+ (positionState.East - hold_position[1]) * vector[1]
+ (positionState.Down - hold_position[2]) * vector[2];
if (kp > 0.0f) {
hold_position[0] += kp * vector[0];
hold_position[1] += kp * vector[1];
hold_position[2] += kp * vector[2];
}
// new angle is equal to old angle plus offset depending on yaw input and time
// (controlVector is normalized with a deadband, change is zero within deadband)
float angle = RAD2DEG(atan2f(vector[1], vector[0]));
float dT = PIOS_DELTATIME_GetAverageSeconds(&actimeval);
angle += 10.0f * controlVector[2] * dT; // TODO magic value could eventually end up in a to be created settings
// resulting movement vector is scaled by velocity demand in controlvector[3] [0.0-1.0]
vector[0] = cosf(DEG2RAD(angle)) * offset.Horizontal * controlVector[3];
vector[1] = sinf(DEG2RAD(angle)) * offset.Horizontal * controlVector[3];
vector[2] = -controlVector[1] * offset.Vertical * controlVector[3];
pathDesired.End.North = hold_position[0] + vector[0];
pathDesired.End.East = hold_position[1] + vector[1];
pathDesired.End.Down = hold_position[2] + vector[2];
// start position has the same offset as in position hold
pathDesired.Start.North = pathDesired.End.North + offset.Horizontal; // in FlyEndPoint the direction of this vector does not matter
pathDesired.Start.East = pathDesired.End.East;
pathDesired.Start.Down = pathDesired.End.Down;
PathDesiredSet(&pathDesired);
}
void plan_run_VelocityRoam()
{
// float alpha;
PathDesiredData pathDesired;
// velocity roam code completely sets pathdesired object. it was not set in setup phase
memset(&pathDesired, 0, sizeof(PathDesiredData));
FlightStatusAssistedControlStateOptions assistedControlFlightMode;
FlightStatusFlightModeOptions flightMode;
FlightModeSettingsPositionHoldOffsetData offset;
FlightModeSettingsPositionHoldOffsetGet(&offset);
FlightStatusAssistedControlStateGet(&assistedControlFlightMode);
FlightStatusFlightModeGet(&flightMode);
StabilizationBankData stabSettings;
StabilizationBankGet(&stabSettings);
ManualControlCommandData cmd;
ManualControlCommandGet(&cmd);
cmd.Roll = applyExpo(cmd.Roll, stabSettings.StickExpo.Roll);
cmd.Pitch = applyExpo(cmd.Pitch, stabSettings.StickExpo.Pitch);
cmd.Yaw = applyExpo(cmd.Yaw, stabSettings.StickExpo.Yaw);
bool flagRollPitchHasInput = (fabsf(cmd.Roll) > 0.0f || fabsf(cmd.Pitch) > 0.0f);
if (!flagRollPitchHasInput) {
// no movement desired, re-enter positionHold at current start-position
if (assistedControlFlightMode == FLIGHTSTATUS_ASSISTEDCONTROLSTATE_PRIMARY) {
// initiate braking and change assisted control flight mode to braking
if (flightMode == FLIGHTSTATUS_FLIGHTMODE_LAND) {
// avoid brake then hold sequence to continue descent.
plan_setup_land_from_velocityroam();
} else {
plan_setup_assistedcontrol();
}
}
// otherwise nothing to do in braking/hold modes
} else {
PositionStateData positionState;
PositionStateGet(&positionState);
// Revert assist control state to primary, which in this case implies
// we are in roaming state (a GPS vector assisted velocity roam)
assistedControlFlightMode = FLIGHTSTATUS_ASSISTEDCONTROLSTATE_PRIMARY;
// Calculate desired velocity in each direction
float angle;
AttitudeStateYawGet(&angle);
angle = DEG2RAD(angle);
float cos_angle = cosf(angle);
float sine_angle = sinf(angle);
float rotated[2] = {
-cmd.Pitch * cos_angle - cmd.Roll * sine_angle,
-cmd.Pitch * sine_angle + cmd.Roll * cos_angle
};
// flip pitch to have pitch down (away) point north
float horizontalVelMax;
float verticalVelMax;
VtolPathFollowerSettingsHorizontalVelMaxGet(&horizontalVelMax);
VtolPathFollowerSettingsVerticalVelMaxGet(&verticalVelMax);
float velocity_north = rotated[0] * horizontalVelMax;
float velocity_east = rotated[1] * horizontalVelMax;
float velocity_down = 0.0f;
if (flightMode == FLIGHTSTATUS_FLIGHTMODE_LAND) {
FlightModeSettingsLandingVelocityGet(&velocity_down);
}
float velocity = velocity_north * velocity_north + velocity_east * velocity_east;
velocity = sqrtf(velocity);
// if one stick input (pitch or roll) should we use fly by vector? set arbitrary distance of say 20m after which we
// expect new stick input
// if two stick input pilot is fighting wind manually and we use fly by velocity
// in reality setting velocity desired to zero will fight wind anyway.
pathDesired.Start.North = positionState.North;
pathDesired.Start.East = positionState.East;
pathDesired.Start.Down = positionState.Down;
pathDesired.ModeParameters[PATHDESIRED_MODEPARAMETER_VELOCITY_VELOCITYVECTOR_NORTH] = velocity_north;
pathDesired.ModeParameters[PATHDESIRED_MODEPARAMETER_VELOCITY_VELOCITYVECTOR_EAST] = velocity_east;
pathDesired.ModeParameters[PATHDESIRED_MODEPARAMETER_VELOCITY_VELOCITYVECTOR_DOWN] = velocity_down;
pathDesired.End.North = positionState.North;
pathDesired.End.East = positionState.East;
pathDesired.End.Down = positionState.Down;
pathDesired.StartingVelocity = velocity;
pathDesired.EndingVelocity = velocity;
pathDesired.Mode = PATHDESIRED_MODE_VELOCITY;
if (flightMode == FLIGHTSTATUS_FLIGHTMODE_LAND) {
pathDesired.Mode = PATHDESIRED_MODE_LAND;
pathDesired.ModeParameters[PATHDESIRED_MODEPARAMETER_LAND_OPTIONS] = (float)PATHDESIRED_MODEPARAMETER_LAND_OPTION_NONE;
} else {
pathDesired.ModeParameters[PATHDESIRED_MODEPARAMETER_VELOCITY_UNUSED] = 0.0f;
}
PathDesiredSet(&pathDesired);
FlightStatusAssistedControlStateSet(&assistedControlFlightMode);
}
}
void SetFov(float fov)
{
g_fov = fov;
g_fovFactor = 2 * tan(DEG2RAD(g_fov) / 2.f);
}
//-----------------------------------------------------------------------------
void ARX_MINIMAP_Show(LPDIRECT3DDEVICE7 m_pd3dDevice, long SHOWLEVEL, long flag, long fl2)
{
float sstartx, sstarty;
if (!pTexDetect)
{
GetTextureFile("Graph\\particles\\flare.bmp");
char temp[256];
MakeDir(temp, "Graph\\particles\\flare.bmp");
pTexDetect = D3DTextr_GetSurfaceContainer(temp);
}
// SHOWLEVEL=8;
// First Load Minimap TC & DATA if needed
if (minimap[SHOWLEVEL].tc == NULL)
{
ARX_MINIMAP_GetData(SHOWLEVEL);
}
if ((minimap[SHOWLEVEL].tc) && (minimap[SHOWLEVEL].tc->m_pddsSurface))
{
float startx, starty, casex, casey, ratiooo;
float mod_x = (float)MAX_BKGX / (float)MINIMAP_MAX_X;
float mod_z = (float)MAX_BKGZ / (float)MINIMAP_MAX_Z;
if (flag == 1)
{
startx = 0;
starty = 0;
casex = (900) / ((float)MINIMAP_MAX_X);
casey = (900) / ((float)MINIMAP_MAX_Z);
ratiooo = 900.f / 250.f;
if (fl2)
{
casex = (600) / ((float)MINIMAP_MAX_X);
casey = (600) / ((float)MINIMAP_MAX_Z);
ratiooo = 600.f / 250.f;
}
}
else
{
startx = (140);
starty = (120);
casex = (250) / ((float)MINIMAP_MAX_X);
casey = (250) / ((float)MINIMAP_MAX_Z);
ratiooo = 1.f;
}
sstartx = startx;
sstarty = starty;
float ofx, ofx2, ofy, ofy2, px, py;
px = py = 0.f;
ofx = mini_offset_x[CURRENTLEVEL];
ofx2 = minimap[SHOWLEVEL].xratio;
ofy = mini_offset_y[CURRENTLEVEL];
ofy2 = minimap[SHOWLEVEL].yratio;
if ((SHOWLEVEL == ARX_LEVELS_GetRealNum(CURRENTLEVEL)) || (flag == 2))
{
// Computes playerpos
ofx = mini_offset_x[CURRENTLEVEL];
ofx2 = minimap[SHOWLEVEL].xratio;
ofy = mini_offset_y[CURRENTLEVEL];
ofy2 = minimap[SHOWLEVEL].yratio;
px = startx + ((player.pos.x + ofx - ofx2) * DIV100 * casex
+ mini_offset_x[CURRENTLEVEL] * ratiooo * mod_x) / mod_x ; //DIV100*2;
py = starty + ((mapmaxy[SHOWLEVEL] - ofy - ofy2) * DIV100 * casey
- (player.pos.z + ofy - ofy2) * DIV100 * casey + mini_offset_y[CURRENTLEVEL] * ratiooo * mod_z) / mod_z ; //DIV100*2;
if (flag == 1)
{
sstartx = startx;
sstarty = starty;
startx = 490.f - px;
starty = 220.f - py;
px += startx;
py += starty;
}
}
D3DTLVERTEX verts[4];
SETTC(m_pd3dDevice, minimap[SHOWLEVEL].tc);
for (long k = 0; k < 4; k++)
{
verts[k].color = 0xFFFFFFFF;
verts[k].rhw = 1;
verts[k].sz = 0.00001f;
}
float div = DIV25;
TextureContainer * tc = minimap[SHOWLEVEL].tc;
float dw = 1.f / (float)max(tc->m_dwDeviceWidth, tc->m_dwOriginalWidth);
float dh = 1.f / (float)max(tc->m_dwDeviceHeight, tc->m_dwOriginalHeight);
float vx2 = 4.f * dw * mod_x;
float vy2 = 4.f * dh * mod_z;
float _px;
RECT boundaries;
float MOD20, MOD20DIV, divXratio, divYratio;
boundaries.bottom = boundaries.left = boundaries.right = boundaries.top = 0;
MOD20 = MOD20DIV = divXratio = divYratio = 0.f;
if (flag != 2)
{
if (flag == 1)
{
MOD20 = 20.f * Xratio;
MOD20DIV = 1.f / (MOD20);
//@PERF do if(fl2){}else{} to make 4 and not 8 flot op if fl2.
ARX_CHECK_LONG((360 + MOD20)*Xratio);
ARX_CHECK_LONG((555 - MOD20)*Xratio);
ARX_CHECK_LONG((85 + MOD20)*Yratio);
ARX_CHECK_LONG((355 - MOD20)*Yratio);
//CAST
boundaries.left = ARX_CLEAN_WARN_CAST_LONG((360 + MOD20) * Xratio);
boundaries.right = ARX_CLEAN_WARN_CAST_LONG((555 - MOD20) * Xratio);
boundaries.top = ARX_CLEAN_WARN_CAST_LONG((85 + MOD20) * Yratio);
boundaries.bottom = ARX_CLEAN_WARN_CAST_LONG((355 - MOD20) * Yratio);
if (fl2)
{
//CHECK (DEBUG)
ARX_CHECK_LONG((390 + MOD20)*Xratio);
ARX_CHECK_LONG((590 - MOD20)*Xratio);
ARX_CHECK_LONG((135 + MOD20)*Yratio);
ARX_CHECK_LONG((295 - MOD20)*Yratio);
//CAST
boundaries.left = ARX_CLEAN_WARN_CAST_LONG((390 + MOD20) * Xratio);
boundaries.right = ARX_CLEAN_WARN_CAST_LONG((590 - MOD20) * Xratio);
boundaries.top = ARX_CLEAN_WARN_CAST_LONG((135 + MOD20) * Yratio);
boundaries.bottom = ARX_CLEAN_WARN_CAST_LONG((295 - MOD20) * Yratio);
}
}
SETALPHABLEND(m_pd3dDevice, TRUE);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_SRCBLEND, D3DBLEND_ZERO);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_DESTBLEND, D3DBLEND_INVSRCCOLOR);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_ZFUNC, D3DCMP_ALWAYS);
SETTEXTUREWRAPMODE(m_pd3dDevice, D3DTADDRESS_CLAMP);
if (fl2)
{
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_SRCBLEND, D3DBLEND_ONE);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_DESTBLEND, D3DBLEND_INVSRCCOLOR);
}
}
else
{
divXratio = 1.f / Xratio;
divYratio = 1.f / Yratio;
}
for (long j = -2; j < MINIMAP_MAX_Z + 2; j++)
{
for (long i = -2; i < MINIMAP_MAX_X + 2; i++)
{
float vx, vy, vxx, vyy;
vxx = ((float)i * (float)ACTIVEBKG->Xdiv * mod_x);
vyy = ((float)j * (float)ACTIVEBKG->Zdiv * mod_z);
vx = (vxx * div) * dw;
vy = (vyy * div) * dh;
long okay = 1;
float posx = (startx + i * casex) * Xratio;
float posy = (starty + j * casey) * Yratio;
if (flag == 1)
{
if ((posx < 360 * Xratio)
|| (posx > 555 * Xratio)
|| (posy < 85 * Yratio)
|| (posy > 355 * Yratio))
okay = 0;
if (fl2)
{
okay = 1;
if ((posx < 390 * Xratio)
|| (posx > 590 * Xratio)
|| (posy < 135 * Yratio)
|| (posy > 295 * Yratio))
okay = 0;
}
}
else
{
if ((posx > 345 * Xratio)
|| (posy > 290 * Yratio))
okay = 0;
}
if (okay)
{
if ((flag == 2)
&& (i >= 0) && (i < MINIMAP_MAX_X)
&& (j >= 0) && (j < MINIMAP_MAX_Z))
{
float d = Distance2D(posx * divXratio + casex * DIV2, posy * divYratio /*-casey * 2 * Yratio*/, px, py);
if (d <= 6.f)
{
long r;
float vv = (6 - d) * DIV6;
if (vv >= 0.5f)
vv = 1.f;
else if (vv > 0.f)
vv = vv * 2.f;
else
vv = 0.f;
F2L((float)(vv * 255.f), &r);
long ucLevel = __max(r, minimap[SHOWLEVEL].revealed[i][j]);
ARX_CHECK_UCHAR(ucLevel);
minimap[SHOWLEVEL].revealed[i][j] = ARX_CLEAN_WARN_CAST_UCHAR(ucLevel);
}
}
if (!FOR_EXTERNAL_PEOPLE)
{
if ((i >= 0) && (i < MINIMAP_MAX_X)
&& (j >= 0) && (j < MINIMAP_MAX_Z))
{
minimap[SHOWLEVEL].revealed[i][j] = 255;
}
}
verts[3].sx = verts[0].sx = (posx);
verts[1].sy = verts[0].sy = (posy);
verts[2].sx = verts[1].sx = posx + (casex * Xratio);
verts[3].sy = verts[2].sy = posy + (casey * Yratio);
verts[3].tu = verts[0].tu = vx;
verts[1].tv = verts[0].tv = vy;
verts[2].tu = verts[1].tu = vx + vx2;
verts[3].tv = verts[2].tv = vy + vy2;
if (flag != 2)
{
float v;
float oo = 0.f;
if ((i < 0) || (i >= MINIMAP_MAX_X) || (j < 0) || (j >= MINIMAP_MAX_Z)) v = 0;
else v = ((float)minimap[SHOWLEVEL].revealed[i][j]) * DIV255;
if (flag == 1)
{
long vert = 0;
_px = verts[vert].sx - boundaries.left;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.right - verts[vert].sx;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = verts[vert].sy - boundaries.top;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.bottom - verts[vert].sy;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
}
if (fl2) verts[0].color = D3DRGB(v * DIV2, v * DIV2, v * DIV2);
else
verts[0].color = D3DRGB(v, v, v);
oo += v;
if ((i + 1 < 0) || (i + 1 >= MINIMAP_MAX_X) || (j < 0) || (j >= MINIMAP_MAX_Z)) v = 0;
else v = ((float)minimap[SHOWLEVEL].revealed[__min(i+1, MINIMAP_MAX_X-1)][j]) * DIV255;
if (flag == 1)
{
long vert = 1;
_px = verts[vert].sx - boundaries.left;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.right - verts[vert].sx;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = verts[vert].sy - boundaries.top;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.bottom - verts[vert].sy;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
}
if (fl2) verts[1].color = D3DRGB(v * DIV2, v * DIV2, v * DIV2);
else
verts[1].color = D3DRGB(v, v, v);
oo += v;
if ((i + 1 < 0) || (i + 1 >= MINIMAP_MAX_X) || (j + 1 < 0) || (j + 1 >= MINIMAP_MAX_Z)) v = 0;
else v = ((float)minimap[SHOWLEVEL].revealed[__min(i+1, MINIMAP_MAX_X-1)][__min(j+1, MINIMAP_MAX_Z-1)]) * DIV255;
if (flag == 1)
{
long vert = 2;
_px = verts[vert].sx - boundaries.left;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.right - verts[vert].sx;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = verts[vert].sy - boundaries.top;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.bottom - verts[vert].sy;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
}
if (fl2) verts[2].color = D3DRGB(v * DIV2, v * DIV2, v * DIV2);
else
verts[2].color = D3DRGB(v, v, v);
oo += v;
if ((i < 0) || (i >= MINIMAP_MAX_X) || (j + 1 < 0) || (j + 1 >= MINIMAP_MAX_Z)) v = 0;
else v = ((float)minimap[SHOWLEVEL].revealed[i][__min(j+1, MINIMAP_MAX_Z-1)]) * DIV255;
if (flag == 1)
{
long vert = 3;
_px = verts[vert].sx - boundaries.left;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.right - verts[vert].sx;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = verts[vert].sy - boundaries.top;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
_px = boundaries.bottom - verts[vert].sy;
if (_px < 0.f) v = 0.f;
else if (_px < MOD20) v *= _px * MOD20DIV;
}
if (fl2) verts[3].color = D3DRGB(v * DIV2, v * DIV2, v * DIV2);
else
verts[3].color = D3DRGB(v, v, v);
oo += v;
if (oo > 0.f)
{
if (fl2)
{
verts[0].sx += DECALX * Xratio;
verts[0].sy += DECALY * Yratio;
verts[1].sx += DECALX * Xratio;
verts[1].sy += DECALY * Yratio;
verts[2].sx += DECALX * Xratio;
verts[2].sy += DECALY * Yratio;
verts[3].sx += DECALX * Xratio;
verts[3].sy += DECALY * Yratio;
}
EERIEDRAWPRIM(GDevice, D3DPT_TRIANGLEFAN, D3DFVF_TLVERTEX | D3DFVF_DIFFUSE, verts, 4, 0);
}
}
}
}
}
if (flag != 2)
{
m_pd3dDevice->SetTextureStageState(0, D3DTSS_ADDRESS , D3DTADDRESS_WRAP);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_ZFUNC, D3DCMP_LESSEQUAL);
SETALPHABLEND(m_pd3dDevice, FALSE);
if ((SHOWLEVEL == ARX_LEVELS_GetRealNum(CURRENTLEVEL)))
{
// Now Draws Playerpos/angle
verts[0].color = 0xFFFF0000;
verts[1].color = 0xFFFF0000;
verts[2].color = 0xFFFF0000;
float val;
if (flag == 1) val = 6.f;
else val = 3.f;
float rx = 0.f;
float ry = -val * 1.8f;
float rx2 = -val * DIV2;
float ry2 = val;
float rx3 = val * DIV2;
float ry3 = val;
float angle = DEG2RAD(player.angle.b);
float ca = EEcos(angle);
float sa = EEsin(angle);
verts[0].sx = (px + rx2 * ca + ry2 * sa) * Xratio;
verts[0].sy = (py + ry2 * ca - rx2 * sa) * Yratio;
verts[1].sx = (px + rx * ca + ry * sa) * Xratio;
verts[1].sy = (py + ry * ca - rx * sa) * Yratio;
verts[2].sx = (px + rx3 * ca + ry3 * sa) * Xratio;
verts[2].sy = (py + ry3 * ca - rx3 * sa) * Yratio;
SETTC(GDevice, NULL);
if (fl2)
{
SETALPHABLEND(m_pd3dDevice, TRUE);
verts[0].sx += DECALX * Xratio;
verts[0].sy += DECALY * Yratio;
verts[1].sx += DECALX * Xratio;
verts[1].sy += DECALY * Yratio;
verts[2].sx += DECALX * Xratio;
verts[2].sy += DECALY * Yratio;
}
EERIEDRAWPRIM(GDevice, D3DPT_TRIANGLEFAN, D3DFVF_TLVERTEX | D3DFVF_DIFFUSE, verts, 3, 0);
if (fl2) SETALPHABLEND(m_pd3dDevice, FALSE);
}
}
// tsu
for (long lnpc = 1; lnpc < inter.nbmax; lnpc++)
{
if ((inter.iobj[lnpc] != NULL) && (inter.iobj[lnpc]->ioflags & IO_NPC))
{
if (inter.iobj[lnpc]->_npcdata->life > 0.f)
if (!((inter.iobj[lnpc]->GameFlags & GFLAG_MEGAHIDE) ||
(inter.iobj[lnpc]->show == SHOW_FLAG_MEGAHIDE))
&& (inter.iobj[lnpc]->show == SHOW_FLAG_IN_SCENE))
if (!(inter.iobj[lnpc]->show == SHOW_FLAG_HIDDEN))
if (inter.iobj[lnpc]->_npcdata->fDetect >= 0)
{
if (player.Full_Skill_Etheral_Link >= inter.iobj[lnpc]->_npcdata->fDetect)
{
float fpx;
float fpy;
fpx = sstartx + ((inter.iobj[lnpc]->pos.x - 100 + ofx - ofx2) * DIV100 * casex
+ mini_offset_x[CURRENTLEVEL] * ratiooo * mod_x) / mod_x;
fpy = sstarty + ((mapmaxy[SHOWLEVEL] - ofy - ofy2) * DIV100 * casey
- (inter.iobj[lnpc]->pos.z + 200 + ofy - ofy2) * DIV100 * casey + mini_offset_y[CURRENTLEVEL] * ratiooo * mod_z) / mod_z;
if (flag == 1)
{
fpx = startx + ((inter.iobj[lnpc]->pos.x - 100 + ofx - ofx2) * DIV100 * casex
+ mini_offset_x[CURRENTLEVEL] * ratiooo * mod_x) / mod_x;
fpy = starty + ((mapmaxy[SHOWLEVEL] - ofy - ofy2) * DIV100 * casey
- (inter.iobj[lnpc]->pos.z + 200 + ofy - ofy2) * DIV100 * casey + mini_offset_y[CURRENTLEVEL] * ratiooo * mod_z) / mod_z;
}
float d = Distance2D(player.pos.x, player.pos.z, inter.iobj[lnpc]->pos.x, inter.iobj[lnpc]->pos.z);
if ((d <= 800) && (fabs(inter.iobj[0]->pos.y - inter.iobj[lnpc]->pos.y) < 250.f))
{
float col = 1.f;
if (d > 600.f)
{
col = 1.f - (d - 600.f) * DIV200;
}
if (!fl2)
{
SETALPHABLEND(m_pd3dDevice, true);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_SRCBLEND, D3DBLEND_ONE);
m_pd3dDevice->SetRenderState(D3DRENDERSTATE_DESTBLEND, D3DBLEND_ONE);
}
else
SETALPHABLEND(m_pd3dDevice, true);
if (fl2)
{
fpx += DECALX * Xratio;
fpy += (DECALY + 15) * Yratio;
}
fpx *= Xratio;
fpy *= Yratio;
EERIEDrawBitmap(GDevice, fpx, fpy,
5.f * ratiooo, 5.f * ratiooo, 0, pTexDetect, D3DRGB(col, 0, 0));
if (!fl2)
SETALPHABLEND(m_pd3dDevice, false);
}
}
}
}
}
if (flag == 0)
for (long i = 0; i < Nb_Mapmarkers; i++)
{
if (Mapmarkers[i].lvl == SHOWLEVEL + 1)
{
float pos_x = Mapmarkers[i].x * 8 * ratiooo * ACTIVEBKG->Xmul * casex + startx;
float pos_y = Mapmarkers[i].y * 8 * ratiooo * ACTIVEBKG->Zmul * casey + starty;
float size = 5.f * ratiooo;
verts[0].color = 0xFFFF0000;
verts[1].color = 0xFFFF0000;
verts[2].color = 0xFFFF0000;
verts[3].color = 0xFFFF0000;
verts[0].sx = (pos_x - size) * Xratio;
verts[0].sy = (pos_y - size) * Yratio;
verts[1].sx = (pos_x + size) * Xratio;
verts[1].sy = (pos_y - size) * Yratio;
verts[2].sx = (pos_x + size) * Xratio;
verts[2].sy = (pos_y + size) * Yratio;
verts[3].sx = (pos_x - size) * Xratio;
verts[3].sy = (pos_y + size) * Yratio;
verts[0].tu = 0.f;
verts[0].tv = 0.f;
verts[1].tu = 1.f;
verts[1].tv = 0.f;
verts[2].tu = 1.f;
verts[2].tv = 1.f;
verts[3].tu = 0.f;
verts[3].tv = 1.f;
if ((!fl2)
&& (MouseInRect(verts[0].sx, verts[0].sy, verts[2].sx, verts[2].sy)))
{
if (!Mapmarkers[i].tstring)
{
_TCHAR output[4096];
MakeLocalised(Mapmarkers[i].string, output, 4096, 0);
Mapmarkers[i].tstring = (_TCHAR *)malloc((_tcslen(output) + 1) * sizeof(_TCHAR));
ZeroMemory(Mapmarkers[i].tstring, (_tcslen(output) + 1)*sizeof(_TCHAR));
_tcscpy(Mapmarkers[i].tstring, output);
}
if (Mapmarkers[i].tstring)
{
RECT rRect, bRect;
SetRect(&bRect , (140), (290)
, (140 + 205), (358));
float fLeft = (bRect.left) * Xratio ;
float fRight = (bRect.right) * Xratio ;
float fTop = (bRect.top) * Yratio ;
float fBottom = (bRect.bottom) * Yratio ;
ARX_CHECK_INT(fLeft);
ARX_CHECK_INT(fRight);
ARX_CHECK_INT(fTop);
ARX_CHECK_INT(fBottom);
SetRect(&rRect
, ARX_CLEAN_WARN_CAST_INT(fLeft)
, ARX_CLEAN_WARN_CAST_INT(fTop)
, ARX_CLEAN_WARN_CAST_INT(fRight)
, ARX_CLEAN_WARN_CAST_INT(fBottom));
long lLengthDraw = ARX_UNICODE_ForceFormattingInRect(
hFontInGameNote, Mapmarkers[i].tstring, 0, rRect);
danaeApp.DANAEEndRender();
_TCHAR Page_Buffer[256];
_tcsncpy(Page_Buffer, Mapmarkers[i].tstring, lLengthDraw);
Page_Buffer[lLengthDraw] = _T('\0');
DrawBookTextInRect(ARX_CLEAN_WARN_CAST_FLOAT(bRect.left), ARX_CLEAN_WARN_CAST_FLOAT(bRect.top),
ARX_CLEAN_WARN_CAST_FLOAT(bRect.right), ARX_CLEAN_WARN_CAST_FLOAT(bRect.bottom),
Page_Buffer, 0, 0x00FF00FF,
hFontInGameNote);
danaeApp.DANAEStartRender();
}
}
if (MapMarkerTc == NULL)
{
MapMarkerTc = MakeTCFromFile("Graph\\interface\\icons\\mapmarker.bmp");
}
SETTC(GDevice, MapMarkerTc);
if (fl2)
{
verts[0].sx += DECALX * Xratio;
verts[0].sy += DECALY * Yratio;
verts[1].sx += DECALX * Xratio;
verts[1].sy += DECALY * Yratio;
verts[2].sx += DECALX * Xratio;
verts[2].sy += DECALY * Yratio;
verts[3].sx += DECALX * Xratio;
verts[3].sy += DECALY * Yratio;
}
EERIEDRAWPRIM(GDevice, D3DPT_TRIANGLEFAN, D3DFVF_TLVERTEX | D3DFVF_DIFFUSE, verts, 4, 0);
}
}
}
}
void SpaceStationType::OnSetupComplete()
{
// Since the model contains (almost) all of the docking information we have to extract that
// and then generate any additional locators and information the station will need from it.
// First we gather the MatrixTransforms that contain the location and orientation of the docking
// locators/waypoints. We store some information within the name of these which needs parsing too.
// Next we build the additional information required for docking ships with SPACE stations
// on autopilot - this is the only option for docking with SPACE stations currently.
// This mostly means offsetting from one locator to create the next in the sequence.
// ground stations have a "special-f*****g-case" 0 stage launch process
shipLaunchStage = ((SURFACE==dockMethod) ? 0 : 3);
// gather the tags
SceneGraph::Model::TVecMT entrance_mts;
SceneGraph::Model::TVecMT locator_mts;
SceneGraph::Model::TVecMT exit_mts;
model->FindTagsByStartOfName("entrance_", entrance_mts);
model->FindTagsByStartOfName("loc_", locator_mts);
model->FindTagsByStartOfName("exit_", exit_mts);
Output("%s has:\n %lu entrances,\n %lu pads,\n %lu exits\n", modelName.c_str(), entrance_mts.size(), locator_mts.size(), exit_mts.size());
// Add the partially initialised ports
for (auto apprIter : entrance_mts)
{
int portId;
PiVerify(1 == sscanf(apprIter->GetName().c_str(), "entrance_port%d", &portId));
PiVerify(portId>0);
SPort new_port;
new_port.portId = portId;
new_port.name = apprIter->GetName();
if(SURFACE==dockMethod) {
const vector3f offDir = apprIter->GetTransform().Up().Normalized();
new_port.m_approach[1] = apprIter->GetTransform();
new_port.m_approach[1].SetTranslate( apprIter->GetTransform().GetTranslate() + (offDir * 500.0f) );
} else {
const vector3f offDir = -apprIter->GetTransform().Back().Normalized();
new_port.m_approach[1] = apprIter->GetTransform();
new_port.m_approach[1].SetTranslate( apprIter->GetTransform().GetTranslate() + (offDir * 1500.0f) );
}
new_port.m_approach[2] = apprIter->GetTransform();
m_ports.push_back( new_port );
}
int bay=0;
for (auto locIter : locator_mts)
{
int bayStr, portId;
int minSize, maxSize;
char padname[8];
const matrix4x4f &locTransform = locIter->GetTransform();
++bay;
// eg:loc_A001_p01_s0_500_b01
PiVerify(5 == sscanf(locIter->GetName().c_str(), "loc_%4s_p%d_s%d_%d_b%d", &padname[0], &portId, &minSize, &maxSize, &bayStr));
PiVerify(bay>0 && portId>0);
// find the port and setup the rest of it's information
bool bFoundPort = false;
matrix4x4f approach1(0.0);
matrix4x4f approach2(0.0);
for(auto &rPort : m_ports) {
if(rPort.portId == portId) {
rPort.minShipSize = std::min(minSize,rPort.minShipSize);
rPort.maxShipSize = std::max(maxSize,rPort.maxShipSize);
rPort.bayIDs.push_back( std::make_pair(bay-1, padname) );
bFoundPort = true;
approach1 = rPort.m_approach[1];
approach2 = rPort.m_approach[2];
break;
}
}
assert(bFoundPort);
// now build the docking/leaving waypoints
if( SURFACE == dockMethod )
{
// ground stations don't have leaving waypoints.
m_portPaths[bay].m_docking[2] = locTransform; // final (docked)
numDockingStages = 2;
numUndockStages = 1;
}
else
{
struct TPointLine
{
// for reference: http://paulbourke.net/geometry/pointlineplane/
static bool ClosestPointOnLine( const vector3f &Point, const vector3f &LineStart, const vector3f &LineEnd, vector3f &Intersection )
{
const float LineMag = ( LineStart - LineEnd ).Length();
const float U = ( ( ( Point.x - LineStart.x ) * ( LineEnd.x - LineStart.x ) ) +
( ( Point.y - LineStart.y ) * ( LineEnd.y - LineStart.y ) ) +
( ( Point.z - LineStart.z ) * ( LineEnd.z - LineStart.z ) ) ) /
( LineMag * LineMag );
if( U < 0.0f || U > 1.0f )
return false; // closest point does not fall within the line segment
Intersection.x = LineStart.x + U * ( LineEnd.x - LineStart.x );
Intersection.y = LineStart.y + U * ( LineEnd.y - LineStart.y );
Intersection.z = LineStart.z + U * ( LineEnd.z - LineStart.z );
return true;
}
};
// create the docking locators
// start
m_portPaths[bay].m_docking[2] = approach2;
m_portPaths[bay].m_docking[2].SetRotationOnly( locTransform.GetOrient() );
// above the pad
vector3f intersectionPos(0.0f);
const vector3f approach1Pos = approach1.GetTranslate();
const vector3f approach2Pos = approach2.GetTranslate();
{
const vector3f p0 = locTransform.GetTranslate(); // plane position
const vector3f l = (approach2Pos - approach1Pos).Normalized(); // ray direction
const vector3f l0 = approach1Pos + (l*10000.0f);
if(!TPointLine::ClosestPointOnLine(p0, approach1Pos, l0, intersectionPos)) {
Output("No point found on line segment");
}
}
m_portPaths[bay].m_docking[3] = locTransform;
m_portPaths[bay].m_docking[3].SetTranslate( intersectionPos );
// final (docked)
m_portPaths[bay].m_docking[4] = locTransform;
numDockingStages = 4;
// leaving locators ...
matrix4x4f orient = locTransform.GetOrient(), EndOrient;
if( exit_mts.empty() )
{
// leaving locators need to face in the opposite direction
const matrix4x4f rot = matrix3x3f::Rotate(DEG2RAD(180.0f), orient.Back());
orient = orient * rot;
orient.SetTranslate( locTransform.GetTranslate() );
EndOrient = approach2;
EndOrient.SetRotationOnly(orient);
}
else
{
// leaving locators, use whatever orientation they have
orient.SetTranslate( locTransform.GetTranslate() );
int exitport = 0;
for( auto &exitIt : exit_mts ) {
PiVerify(1 == sscanf( exitIt->GetName().c_str(), "exit_port%d", &exitport ));
if( exitport == portId )
{
EndOrient = exitIt->GetTransform();
break;
}
}
if( exitport == 0 )
{
EndOrient = approach2;
}
}
// create the leaving locators
m_portPaths[bay].m_leaving[1] = locTransform; // start - maintain the same orientation and position as when docked.
m_portPaths[bay].m_leaving[2] = orient; // above the pad - reorient...
m_portPaths[bay].m_leaving[2].SetTranslate( intersectionPos ); // ...and translate to new position
m_portPaths[bay].m_leaving[3] = EndOrient; // end (on manual after here)
numUndockStages = 3;
}
}
numDockingPorts = m_portPaths.size();
// sanity
assert(!m_portPaths.empty());
assert(numDockingStages > 0);
assert(numUndockStages > 0);
// insanity
for (PortPathMap::const_iterator pIt = m_portPaths.begin(), pItEnd = m_portPaths.end(); pIt!=pItEnd; ++pIt)
{
if (Uint32(numDockingStages-1) < pIt->second.m_docking.size()) {
Error(
"(%s): numDockingStages (%d) vs number of docking stages (" SIZET_FMT ")\n"
"Must have at least the same number of entries as the number of docking stages "
"PLUS the docking timeout at the start of the array.",
modelName.c_str(), (numDockingStages-1), pIt->second.m_docking.size());
} else if (Uint32(numDockingStages-1) != pIt->second.m_docking.size()) {
Warning(
"(%s): numDockingStages (%d) vs number of docking stages (" SIZET_FMT ")\n",
modelName.c_str(), (numDockingStages-1), pIt->second.m_docking.size());
}
if (0!=pIt->second.m_leaving.size() && Uint32(numUndockStages) < pIt->second.m_leaving.size()) {
Error(
"(%s): numUndockStages (%d) vs number of leaving stages (" SIZET_FMT ")\n"
"Must have at least the same number of entries as the number of leaving stages.",
modelName.c_str(), (numDockingStages-1), pIt->second.m_docking.size());
} else if(0!=pIt->second.m_leaving.size() && Uint32(numUndockStages) != pIt->second.m_leaving.size()) {
Warning(
"(%s): numUndockStages (%d) vs number of leaving stages (" SIZET_FMT ")\n",
modelName.c_str(), numUndockStages, pIt->second.m_leaving.size());
}
}
}
