int
dtls1_connect(SSL *s)
{
BUF_MEM *buf = NULL;
void (*cb)(const SSL *ssl, int type, int val) = NULL;
int ret = -1;
int new_state, state, skip = 0;
#ifndef OPENSSL_NO_SCTP
unsigned char sctpauthkey[64];
char labelbuffer[sizeof(DTLS1_SCTP_AUTH_LABEL)];
#endif
ERR_clear_error();
errno = 0;
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s))
SSL_clear(s);
#ifndef OPENSSL_NO_SCTP
/* Notify SCTP BIO socket to enter handshake
* mode and prevent stream identifier other
* than 0. Will be ignored if no SCTP is used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE,
s->in_handshake, NULL);
#endif
for (;;) {
state = s->state;
switch (s->state) {
case SSL_ST_RENEGOTIATE:
s->renegotiate = 1;
s->state = SSL_ST_CONNECT;
s->ctx->stats.sess_connect_renegotiate++;
/* break */
case SSL_ST_BEFORE:
case SSL_ST_CONNECT:
case SSL_ST_BEFORE|SSL_ST_CONNECT:
case SSL_ST_OK|SSL_ST_CONNECT:
s->server = 0;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_START, 1);
if ((s->version & 0xff00 ) != (DTLS1_VERSION & 0xff00) &&
(s->version & 0xff00 ) != (DTLS1_BAD_VER & 0xff00)) {
SSLerr(SSL_F_DTLS1_CONNECT,
ERR_R_INTERNAL_ERROR);
ret = -1;
goto end;
}
/* s->version=SSL3_VERSION; */
s->type = SSL_ST_CONNECT;
if (s->init_buf == NULL) {
if ((buf = BUF_MEM_new()) == NULL) {
ret = -1;
goto end;
}
if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
ret = -1;
goto end;
}
s->init_buf = buf;
buf = NULL;
}
if (!ssl3_setup_buffers(s)) {
ret = -1;
goto end;
}
/* setup buffing BIO */
if (!ssl_init_wbio_buffer(s, 0)) {
ret = -1;
goto end;
}
/* don't push the buffering BIO quite yet */
s->state = SSL3_ST_CW_CLNT_HELLO_A;
s->ctx->stats.sess_connect++;
s->init_num = 0;
/* mark client_random uninitialized */
memset(s->s3->client_random, 0,
sizeof(s->s3->client_random));
s->d1->send_cookie = 0;
s->hit = 0;
break;
#ifndef OPENSSL_NO_SCTP
case DTLS1_SCTP_ST_CR_READ_SOCK:
if (BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) {
s->s3->in_read_app_data = 2;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
ret = -1;
goto end;
}
s->state = s->s3->tmp.next_state;
break;
case DTLS1_SCTP_ST_CW_WRITE_SOCK:
/* read app data until dry event */
ret = BIO_dgram_sctp_wait_for_dry(SSL_get_wbio(s));
if (ret < 0)
goto end;
if (ret == 0) {
s->s3->in_read_app_data = 2;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
ret = -1;
goto end;
}
s->state = s->d1->next_state;
break;
#endif
case SSL3_ST_CW_CLNT_HELLO_A:
case SSL3_ST_CW_CLNT_HELLO_B:
s->shutdown = 0;
/* every DTLS ClientHello resets Finished MAC */
ssl3_init_finished_mac(s);
dtls1_start_timer(s);
ret = dtls1_client_hello(s);
if (ret <= 0)
goto end;
if (s->d1->send_cookie) {
s->state = SSL3_ST_CW_FLUSH;
s->s3->tmp.next_state = SSL3_ST_CR_SRVR_HELLO_A;
} else
s->state = SSL3_ST_CR_SRVR_HELLO_A;
s->init_num = 0;
#ifndef OPENSSL_NO_SCTP
/* Disable buffering for SCTP */
if (!BIO_dgram_is_sctp(SSL_get_wbio(s))) {
#endif
/* turn on buffering for the next lot of output */
if (s->bbio != s->wbio)
s->wbio = BIO_push(s->bbio, s->wbio);
#ifndef OPENSSL_NO_SCTP
}
#endif
break;
case SSL3_ST_CR_SRVR_HELLO_A:
case SSL3_ST_CR_SRVR_HELLO_B:
ret = ssl3_get_server_hello(s);
if (ret <= 0)
goto end;
else {
if (s->hit) {
#ifndef OPENSSL_NO_SCTP
/* Add new shared key for SCTP-Auth,
* will be ignored if no SCTP used.
*/
snprintf((char*) labelbuffer, sizeof(DTLS1_SCTP_AUTH_LABEL),
DTLS1_SCTP_AUTH_LABEL);
SSL_export_keying_material(s, sctpauthkey,
sizeof(sctpauthkey), labelbuffer,
sizeof(labelbuffer), NULL, 0, 0);
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);
#endif
s->state = SSL3_ST_CR_FINISHED_A;
} else
s->state = DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A;
}
s->init_num = 0;
break;
case DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A:
case DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B:
ret = dtls1_get_hello_verify(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if ( s->d1->send_cookie) /* start again, with a cookie */
s->state = SSL3_ST_CW_CLNT_HELLO_A;
else
s->state = SSL3_ST_CR_CERT_A;
s->init_num = 0;
break;
case SSL3_ST_CR_CERT_A:
case SSL3_ST_CR_CERT_B:
ret = ssl3_check_finished(s);
if (ret <= 0)
goto end;
if (ret == 2) {
s->hit = 1;
if (s->tlsext_ticket_expected)
s->state = SSL3_ST_CR_SESSION_TICKET_A;
else
s->state = SSL3_ST_CR_FINISHED_A;
s->init_num = 0;
break;
}
/* Check if it is anon DH. */
if (!(s->s3->tmp.new_cipher->algorithm_auth &
SSL_aNULL)) {
ret = ssl3_get_server_certificate(s);
if (ret <= 0)
goto end;
if (s->tlsext_status_expected)
s->state = SSL3_ST_CR_CERT_STATUS_A;
else
s->state = SSL3_ST_CR_KEY_EXCH_A;
} else {
skip = 1;
s->state = SSL3_ST_CR_KEY_EXCH_A;
}
s->init_num = 0;
break;
case SSL3_ST_CR_KEY_EXCH_A:
case SSL3_ST_CR_KEY_EXCH_B:
ret = ssl3_get_key_exchange(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_CERT_REQ_A;
s->init_num = 0;
/* at this point we check that we have the
* required stuff from the server */
if (!ssl3_check_cert_and_algorithm(s)) {
ret = -1;
goto end;
}
break;
case SSL3_ST_CR_CERT_REQ_A:
case SSL3_ST_CR_CERT_REQ_B:
ret = ssl3_get_certificate_request(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_SRVR_DONE_A;
s->init_num = 0;
break;
case SSL3_ST_CR_SRVR_DONE_A:
case SSL3_ST_CR_SRVR_DONE_B:
ret = ssl3_get_server_done(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->s3->tmp.cert_req)
s->s3->tmp.next_state = SSL3_ST_CW_CERT_A;
else
s->s3->tmp.next_state = SSL3_ST_CW_KEY_EXCH_A;
s->init_num = 0;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
state == SSL_ST_RENEGOTIATE)
s->state = DTLS1_SCTP_ST_CR_READ_SOCK;
else
#endif
s->state = s->s3->tmp.next_state;
break;
case SSL3_ST_CW_CERT_A:
case SSL3_ST_CW_CERT_B:
case SSL3_ST_CW_CERT_C:
case SSL3_ST_CW_CERT_D:
dtls1_start_timer(s);
ret = dtls1_send_client_certificate(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_KEY_EXCH_A;
s->init_num = 0;
break;
case SSL3_ST_CW_KEY_EXCH_A:
case SSL3_ST_CW_KEY_EXCH_B:
dtls1_start_timer(s);
ret = dtls1_send_client_key_exchange(s);
if (ret <= 0)
goto end;
#ifndef OPENSSL_NO_SCTP
/* Add new shared key for SCTP-Auth,
* will be ignored if no SCTP used.
*/
snprintf((char*)labelbuffer,
sizeof(DTLS1_SCTP_AUTH_LABEL),
DTLS1_SCTP_AUTH_LABEL);
SSL_export_keying_material(s, sctpauthkey,
sizeof(sctpauthkey), labelbuffer,
sizeof(labelbuffer), NULL, 0, 0);
BIO_ctrl(SSL_get_wbio(s),
BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);
#endif
/* EAY EAY EAY need to check for DH fix cert
* sent back */
/* For TLS, cert_req is set to 2, so a cert chain
* of nothing is sent, but no verify packet is sent */
if (s->s3->tmp.cert_req == 1) {
s->state = SSL3_ST_CW_CERT_VRFY_A;
} else {
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = SSL3_ST_CW_CHANGE_A;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
} else
#endif
s->state = SSL3_ST_CW_CHANGE_A;
s->s3->change_cipher_spec = 0;
}
s->init_num = 0;
break;
case SSL3_ST_CW_CERT_VRFY_A:
case SSL3_ST_CW_CERT_VRFY_B:
dtls1_start_timer(s);
ret = dtls1_send_client_verify(s);
if (ret <= 0)
goto end;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = SSL3_ST_CW_CHANGE_A;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
} else
#endif
s->state = SSL3_ST_CW_CHANGE_A;
s->init_num = 0;
s->s3->change_cipher_spec = 0;
break;
case SSL3_ST_CW_CHANGE_A:
case SSL3_ST_CW_CHANGE_B:
if (!s->hit)
dtls1_start_timer(s);
ret = dtls1_send_change_cipher_spec(s,
SSL3_ST_CW_CHANGE_A, SSL3_ST_CW_CHANGE_B);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_FINISHED_A;
s->init_num = 0;
s->session->cipher = s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s)) {
ret = -1;
goto end;
}
if (!s->method->ssl3_enc->change_cipher_state(s,
SSL3_CHANGE_CIPHER_CLIENT_WRITE)) {
ret = -1;
goto end;
}
#ifndef OPENSSL_NO_SCTP
if (s->hit) {
/* Change to new shared key of SCTP-Auth,
* will be ignored if no SCTP used.
*/
BIO_ctrl(SSL_get_wbio(s),
BIO_CTRL_DGRAM_SCTP_NEXT_AUTH_KEY, 0, NULL);
}
#endif
dtls1_reset_seq_numbers(s, SSL3_CC_WRITE);
break;
case SSL3_ST_CW_FINISHED_A:
case SSL3_ST_CW_FINISHED_B:
if (!s->hit)
dtls1_start_timer(s);
ret = dtls1_send_finished(s,
SSL3_ST_CW_FINISHED_A, SSL3_ST_CW_FINISHED_B,
s->method->ssl3_enc->client_finished_label,
s->method->ssl3_enc->client_finished_label_len);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_FLUSH;
/* clear flags */
s->s3->flags&= ~SSL3_FLAGS_POP_BUFFER;
if (s->hit) {
s->s3->tmp.next_state = SSL_ST_OK;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = s->s3->tmp.next_state;
s->s3->tmp.next_state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
}
#endif
if (s->s3->flags & SSL3_FLAGS_DELAY_CLIENT_FINISHED) {
s->state = SSL_ST_OK;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = SSL_ST_OK;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
}
#endif
s->s3->flags |= SSL3_FLAGS_POP_BUFFER;
s->s3->delay_buf_pop_ret = 0;
}
} else {
#ifndef OPENSSL_NO_SCTP
/* Change to new shared key of SCTP-Auth,
* will be ignored if no SCTP used.
*/
BIO_ctrl(SSL_get_wbio(s),
BIO_CTRL_DGRAM_SCTP_NEXT_AUTH_KEY, 0, NULL);
#endif
/* Allow NewSessionTicket if ticket expected */
if (s->tlsext_ticket_expected)
s->s3->tmp.next_state =
SSL3_ST_CR_SESSION_TICKET_A;
else
s->s3->tmp.next_state =
SSL3_ST_CR_FINISHED_A;
}
s->init_num = 0;
break;
case SSL3_ST_CR_SESSION_TICKET_A:
case SSL3_ST_CR_SESSION_TICKET_B:
ret = ssl3_get_new_session_ticket(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_FINISHED_A;
s->init_num = 0;
break;
case SSL3_ST_CR_CERT_STATUS_A:
case SSL3_ST_CR_CERT_STATUS_B:
ret = ssl3_get_cert_status(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_KEY_EXCH_A;
s->init_num = 0;
break;
case SSL3_ST_CR_FINISHED_A:
case SSL3_ST_CR_FINISHED_B:
s->d1->change_cipher_spec_ok = 1;
ret = ssl3_get_finished(s, SSL3_ST_CR_FINISHED_A,
SSL3_ST_CR_FINISHED_B);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->hit)
s->state = SSL3_ST_CW_CHANGE_A;
else
s->state = SSL_ST_OK;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
state == SSL_ST_RENEGOTIATE) {
s->d1->next_state = s->state;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
}
#endif
s->init_num = 0;
break;
case SSL3_ST_CW_FLUSH:
s->rwstate = SSL_WRITING;
if (BIO_flush(s->wbio) <= 0) {
/* If the write error was fatal, stop trying */
if (!BIO_should_retry(s->wbio)) {
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
}
ret = -1;
goto end;
}
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
break;
case SSL_ST_OK:
/* clean a few things up */
ssl3_cleanup_key_block(s);
/* If we are not 'joining' the last two packets,
* remove the buffering now */
if (!(s->s3->flags & SSL3_FLAGS_POP_BUFFER))
ssl_free_wbio_buffer(s);
/* else do it later in ssl3_write */
s->init_num = 0;
s->renegotiate = 0;
s->new_session = 0;
ssl_update_cache(s, SSL_SESS_CACHE_CLIENT);
if (s->hit)
s->ctx->stats.sess_hit++;
ret = 1;
/* s->server=0; */
s->handshake_func = dtls1_connect;
s->ctx->stats.sess_connect_good++;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_DONE, 1);
/* done with handshaking */
s->d1->handshake_read_seq = 0;
s->d1->next_handshake_write_seq = 0;
goto end;
/* break; */
default:
SSLerr(SSL_F_DTLS1_CONNECT, SSL_R_UNKNOWN_STATE);
ret = -1;
goto end;
/* break; */
}
/* did we do anything */
if (!s->s3->tmp.reuse_message && !skip) {
if (s->debug) {
if ((ret = BIO_flush(s->wbio)) <= 0)
goto end;
}
if ((cb != NULL) && (s->state != state)) {
new_state = s->state;
s->state = state;
cb(s, SSL_CB_CONNECT_LOOP, 1);
s->state = new_state;
}
}
skip = 0;
}
end:
s->in_handshake--;
#ifndef OPENSSL_NO_SCTP
/* Notify SCTP BIO socket to leave handshake
* mode and allow stream identifier other
* than 0. Will be ignored if no SCTP is used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE,
s->in_handshake, NULL);
#endif
if (buf != NULL)
BUF_MEM_free(buf);
if (cb != NULL)
cb(s, SSL_CB_CONNECT_EXIT, ret);
return (ret);
}
/*-
* Return up to 'len' payload bytes received in 'type' records.
* 'type' is one of the following:
*
* - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
* - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
* - 0 (during a shutdown, no data has to be returned)
*
* If we don't have stored data to work from, read a SSL/TLS record first
* (possibly multiple records if we still don't have anything to return).
*
* This function must handle any surprises the peer may have for us, such as
* Alert records (e.g. close_notify) or renegotiation requests. ChangeCipherSpec
* messages are treated as if they were handshake messages *if* the |recd_type|
* argument is non NULL.
* Also if record payloads contain fragments too small to process, we store
* them until there is enough for the respective protocol (the record protocol
* may use arbitrary fragmentation and even interleaving):
* Change cipher spec protocol
* just 1 byte needed, no need for keeping anything stored
* Alert protocol
* 2 bytes needed (AlertLevel, AlertDescription)
* Handshake protocol
* 4 bytes needed (HandshakeType, uint24 length) -- we just have
* to detect unexpected Client Hello and Hello Request messages
* here, anything else is handled by higher layers
* Application data protocol
* none of our business
*/
int dtls1_read_bytes(SSL *s, int type, int *recvd_type, unsigned char *buf,
int len, int peek)
{
int al, i, j, ret;
unsigned int n;
SSL3_RECORD *rr;
void (*cb) (const SSL *ssl, int type2, int val) = NULL;
if (!SSL3_BUFFER_is_initialised(&s->rlayer.rbuf)) {
/* Not initialized yet */
if (!ssl3_setup_buffers(s))
return (-1);
}
if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
(type != SSL3_RT_HANDSHAKE)) ||
(peek && (type != SSL3_RT_APPLICATION_DATA))) {
SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
return -1;
}
/*
* check whether there's a handshake message (client hello?) waiting
*/
if ((ret = have_handshake_fragment(s, type, buf, len)))
return ret;
/*
* Now s->rlayer.d->handshake_fragment_len == 0 if
* type == SSL3_RT_HANDSHAKE.
*/
#ifndef OPENSSL_NO_SCTP
/*
* Continue handshake if it had to be interrupted to read app data with
* SCTP.
*/
if ((!ossl_statem_get_in_handshake(s) && SSL_in_init(s)) ||
(BIO_dgram_is_sctp(SSL_get_rbio(s))
&& ossl_statem_in_sctp_read_sock(s)
&& s->s3->in_read_app_data != 2))
#else
if (!ossl_statem_get_in_handshake(s) && SSL_in_init(s))
#endif
{
/* type == SSL3_RT_APPLICATION_DATA */
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
}
start:
s->rwstate = SSL_NOTHING;
/*-
* s->s3->rrec.type - is the type of record
* s->s3->rrec.data, - data
* s->s3->rrec.off, - offset into 'data' for next read
* s->s3->rrec.length, - number of bytes.
*/
rr = s->rlayer.rrec;
/*
* We are not handshaking and have no data yet, so process data buffered
* during the last handshake in advance, if any.
*/
if (SSL_is_init_finished(s) && SSL3_RECORD_get_length(rr) == 0) {
pitem *item;
item = pqueue_pop(s->rlayer.d->buffered_app_data.q);
if (item) {
#ifndef OPENSSL_NO_SCTP
/* Restore bio_dgram_sctp_rcvinfo struct */
if (BIO_dgram_is_sctp(SSL_get_rbio(s))) {
DTLS1_RECORD_DATA *rdata = (DTLS1_RECORD_DATA *)item->data;
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_SET_RCVINFO,
sizeof(rdata->recordinfo), &rdata->recordinfo);
}
#endif
dtls1_copy_record(s, item);
OPENSSL_free(item->data);
pitem_free(item);
}
}
/* Check for timeout */
if (dtls1_handle_timeout(s) > 0)
goto start;
/* get new packet if necessary */
if ((SSL3_RECORD_get_length(rr) == 0)
|| (s->rlayer.rstate == SSL_ST_READ_BODY)) {
ret = dtls1_get_record(s);
if (ret <= 0) {
ret = dtls1_read_failed(s, ret);
/* anything other than a timeout is an error */
if (ret <= 0)
return (ret);
else
goto start;
}
}
/* we now have a packet which can be read and processed */
if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
* reset by ssl3_get_finished */
&& (SSL3_RECORD_get_type(rr) != SSL3_RT_HANDSHAKE)) {
/*
* We now have application data between CCS and Finished. Most likely
* the packets were reordered on their way, so buffer the application
* data for later processing rather than dropping the connection.
*/
if (dtls1_buffer_record(s, &(s->rlayer.d->buffered_app_data),
SSL3_RECORD_get_seq_num(rr)) < 0) {
SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
return -1;
}
SSL3_RECORD_set_length(rr, 0);
goto start;
}
/*
* If the other end has shut down, throw anything we read away (even in
* 'peek' mode)
*/
if (s->shutdown & SSL_RECEIVED_SHUTDOWN) {
SSL3_RECORD_set_length(rr, 0);
s->rwstate = SSL_NOTHING;
return (0);
}
if (type == SSL3_RECORD_get_type(rr)
|| (SSL3_RECORD_get_type(rr) == SSL3_RT_CHANGE_CIPHER_SPEC
&& type == SSL3_RT_HANDSHAKE && recvd_type != NULL)) {
/*
* SSL3_RT_APPLICATION_DATA or
* SSL3_RT_HANDSHAKE or
* SSL3_RT_CHANGE_CIPHER_SPEC
*/
/*
* make sure that we are not getting application data when we are
* doing a handshake for the first time
*/
if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
(s->enc_read_ctx == NULL)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_APP_DATA_IN_HANDSHAKE);
goto f_err;
}
if (recvd_type != NULL)
*recvd_type = SSL3_RECORD_get_type(rr);
if (len <= 0)
return (len);
if ((unsigned int)len > SSL3_RECORD_get_length(rr))
n = SSL3_RECORD_get_length(rr);
else
n = (unsigned int)len;
memcpy(buf, &(SSL3_RECORD_get_data(rr)[SSL3_RECORD_get_off(rr)]), n);
if (!peek) {
SSL3_RECORD_sub_length(rr, n);
SSL3_RECORD_add_off(rr, n);
if (SSL3_RECORD_get_length(rr) == 0) {
s->rlayer.rstate = SSL_ST_READ_HEADER;
SSL3_RECORD_set_off(rr, 0);
}
}
#ifndef OPENSSL_NO_SCTP
/*
* We were about to renegotiate but had to read belated application
* data first, so retry.
*/
if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
SSL3_RECORD_get_type(rr) == SSL3_RT_APPLICATION_DATA &&
ossl_statem_in_sctp_read_sock(s)) {
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
}
/*
* We might had to delay a close_notify alert because of reordered
* app data. If there was an alert and there is no message to read
* anymore, finally set shutdown.
*/
if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
s->d1->shutdown_received
&& !BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) {
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
return (0);
}
#endif
return (n);
}
/*
* If we get here, then type != rr->type; if we have a handshake message,
* then it was unexpected (Hello Request or Client Hello).
*/
/*
* In case of record types for which we have 'fragment' storage, fill
* that so that we can process the data at a fixed place.
*/
{
unsigned int k, dest_maxlen = 0;
unsigned char *dest = NULL;
unsigned int *dest_len = NULL;
if (SSL3_RECORD_get_type(rr) == SSL3_RT_HANDSHAKE) {
dest_maxlen = sizeof s->rlayer.d->handshake_fragment;
dest = s->rlayer.d->handshake_fragment;
dest_len = &s->rlayer.d->handshake_fragment_len;
} else if (SSL3_RECORD_get_type(rr) == SSL3_RT_ALERT) {
dest_maxlen = sizeof(s->rlayer.d->alert_fragment);
dest = s->rlayer.d->alert_fragment;
dest_len = &s->rlayer.d->alert_fragment_len;
}
#ifndef OPENSSL_NO_HEARTBEATS
else if (SSL3_RECORD_get_type(rr) == DTLS1_RT_HEARTBEAT) {
/* We allow a 0 return */
if (dtls1_process_heartbeat(s, SSL3_RECORD_get_data(rr),
SSL3_RECORD_get_length(rr)) < 0) {
return -1;
}
/* Exit and notify application to read again */
SSL3_RECORD_set_length(rr, 0);
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
return (-1);
}
#endif
/* else it's a CCS message, or application data or wrong */
else if (SSL3_RECORD_get_type(rr) != SSL3_RT_CHANGE_CIPHER_SPEC) {
/*
* Application data while renegotiating is allowed. Try again
* reading.
*/
if (SSL3_RECORD_get_type(rr) == SSL3_RT_APPLICATION_DATA) {
BIO *bio;
s->s3->in_read_app_data = 2;
bio = SSL_get_rbio(s);
s->rwstate = SSL_READING;
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
/* Not certain if this is the right error handling */
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
}
if (dest_maxlen > 0) {
/*
* XDTLS: In a pathological case, the Client Hello may be
* fragmented--don't always expect dest_maxlen bytes
*/
if (SSL3_RECORD_get_length(rr) < dest_maxlen) {
#ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
/*
* for normal alerts rr->length is 2, while
* dest_maxlen is 7 if we were to handle this
* non-existing alert...
*/
FIX ME
#endif
s->rlayer.rstate = SSL_ST_READ_HEADER;
SSL3_RECORD_set_length(rr, 0);
goto start;
}
/* now move 'n' bytes: */
for (k = 0; k < dest_maxlen; k++) {
dest[k] = SSL3_RECORD_get_data(rr)[SSL3_RECORD_get_off(rr)];
SSL3_RECORD_add_off(rr, 1);
SSL3_RECORD_add_length(rr, -1);
}
*dest_len = dest_maxlen;
}
}
/*-
* s->rlayer.d->handshake_fragment_len == 12 iff rr->type == SSL3_RT_HANDSHAKE;
* s->rlayer.d->alert_fragment_len == 7 iff rr->type == SSL3_RT_ALERT.
* (Possibly rr is 'empty' now, i.e. rr->length may be 0.)
*/
/* If we are a client, check for an incoming 'Hello Request': */
if ((!s->server) &&
(s->rlayer.d->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
(s->rlayer.d->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
(s->session != NULL) && (s->session->cipher != NULL)) {
s->rlayer.d->handshake_fragment_len = 0;
if ((s->rlayer.d->handshake_fragment[1] != 0) ||
(s->rlayer.d->handshake_fragment[2] != 0) ||
(s->rlayer.d->handshake_fragment[3] != 0)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_BAD_HELLO_REQUEST);
goto f_err;
}
/*
* no need to check sequence number on HELLO REQUEST messages
*/
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
s->rlayer.d->handshake_fragment, 4, s,
s->msg_callback_arg);
if (SSL_is_init_finished(s) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
!s->s3->renegotiate) {
s->d1->handshake_read_seq++;
s->new_session = 1;
ssl3_renegotiate(s);
if (ssl3_renegotiate_check(s)) {
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_DTLS1_READ_BYTES,
SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (SSL3_BUFFER_get_left(&s->rlayer.rbuf) == 0) {
/* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data,
* but we trigger an SSL handshake, we return -1 with
* the retry option set. Otherwise renegotiation may
* cause nasty problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
}
}
/*
* we either finished a handshake or ignored the request, now try
* again to obtain the (application) data we were asked for
*/
goto start;
}
if (s->rlayer.d->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH) {
int alert_level = s->rlayer.d->alert_fragment[0];
int alert_descr = s->rlayer.d->alert_fragment[1];
s->rlayer.d->alert_fragment_len = 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_ALERT,
s->rlayer.d->alert_fragment, 2, s,
s->msg_callback_arg);
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
if (cb != NULL) {
j = (alert_level << 8) | alert_descr;
cb(s, SSL_CB_READ_ALERT, j);
}
if (alert_level == SSL3_AL_WARNING) {
s->s3->warn_alert = alert_descr;
if (alert_descr == SSL_AD_CLOSE_NOTIFY) {
#ifndef OPENSSL_NO_SCTP
/*
* With SCTP and streams the socket may deliver app data
* after a close_notify alert. We have to check this first so
* that nothing gets discarded.
*/
if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) {
s->d1->shutdown_received = 1;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
return -1;
}
#endif
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
return (0);
}
#if 0
/* XXX: this is a possible improvement in the future */
/* now check if it's a missing record */
if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) {
unsigned short seq;
unsigned int frag_off;
unsigned char *p = &(s->rlayer.d->alert_fragment[2]);
n2s(p, seq);
n2l3(p, frag_off);
dtls1_retransmit_message(s,
dtls1_get_queue_priority
(frag->msg_header.seq, 0), frag_off,
&found);
if (!found && SSL_in_init(s)) {
/*
* fprintf( stderr,"in init = %d\n", SSL_in_init(s));
*/
/*
* requested a message not yet sent, send an alert
* ourselves
*/
ssl3_send_alert(s, SSL3_AL_WARNING,
DTLS1_AD_MISSING_HANDSHAKE_MESSAGE);
}
}
#endif
} else if (alert_level == SSL3_AL_FATAL) {
char tmp[16];
s->rwstate = SSL_NOTHING;
s->s3->fatal_alert = alert_descr;
SSLerr(SSL_F_DTLS1_READ_BYTES,
SSL_AD_REASON_OFFSET + alert_descr);
BIO_snprintf(tmp, sizeof tmp, "%d", alert_descr);
ERR_add_error_data(2, "SSL alert number ", tmp);
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
SSL_CTX_remove_session(s->session_ctx, s->session);
return (0);
} else {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNKNOWN_ALERT_TYPE);
goto f_err;
}
goto start;
}
if (s->shutdown & SSL_SENT_SHUTDOWN) { /* but we have not received a
* shutdown */
s->rwstate = SSL_NOTHING;
SSL3_RECORD_set_length(rr, 0);
return (0);
}
if (SSL3_RECORD_get_type(rr) == SSL3_RT_CHANGE_CIPHER_SPEC) {
/*
* We can't process a CCS now, because previous handshake messages
* are still missing, so just drop it.
*/
SSL3_RECORD_set_length(rr, 0);
goto start;
}
/*
* Unexpected handshake message (Client Hello, or protocol violation)
*/
if ((s->rlayer.d->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
!ossl_statem_get_in_handshake(s)) {
struct hm_header_st msg_hdr;
/* this may just be a stale retransmit */
dtls1_get_message_header(rr->data, &msg_hdr);
if (SSL3_RECORD_get_epoch(rr) != s->rlayer.d->r_epoch) {
SSL3_RECORD_set_length(rr, 0);
goto start;
}
/*
* If we are server, we may have a repeated FINISHED of the client
* here, then retransmit our CCS and FINISHED.
*/
if (msg_hdr.type == SSL3_MT_FINISHED) {
if (dtls1_check_timeout_num(s) < 0)
return -1;
dtls1_retransmit_buffered_messages(s);
SSL3_RECORD_set_length(rr, 0);
goto start;
}
if (SSL_is_init_finished(s) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS)) {
ossl_statem_set_in_init(s, 1);
s->renegotiate = 1;
s->new_session = 1;
}
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (SSL3_BUFFER_get_left(&s->rlayer.rbuf) == 0) {
/* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data, but we
* trigger an SSL handshake, we return -1 with the retry
* option set. Otherwise renegotiation may cause nasty
* problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
goto start;
}
switch (SSL3_RECORD_get_type(rr)) {
default:
/* TLS just ignores unknown message types */
if (s->version == TLS1_VERSION) {
SSL3_RECORD_set_length(rr, 0);
goto start;
}
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
case SSL3_RT_CHANGE_CIPHER_SPEC:
case SSL3_RT_ALERT:
case SSL3_RT_HANDSHAKE:
/*
* we already handled all of these, with the possible exception of
* SSL3_RT_HANDSHAKE when ossl_statem_get_in_handshake(s) is true, but
* that should not happen when type != rr->type
*/
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
goto f_err;
case SSL3_RT_APPLICATION_DATA:
/*
* At this point, we were expecting handshake data, but have
* application data. If the library was running inside ssl3_read()
* (i.e. in_read_app_data is set) and it makes sense to read
* application data at this point (session renegotiation not yet
* started), we will indulge it.
*/
if (s->s3->in_read_app_data &&
(s->s3->total_renegotiations != 0) &&
ossl_statem_app_data_allowed(s)) {
s->s3->in_read_app_data = 2;
return (-1);
} else {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
}
}
/* not reached */
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
return (-1);
}
int ssl23_accept(SSL *s)
{
BUF_MEM *buf;
unsigned long Time=(unsigned long)time(NULL);
void (*cb)(const SSL *ssl,int type,int val)=NULL;
int ret= -1;
int new_state,state;
RAND_add(&Time,sizeof(Time),0);
ERR_clear_error();
clear_sys_error();
if (s->info_callback != NULL)
cb=s->info_callback;
else if (s->ctx->info_callback != NULL)
cb=s->ctx->info_callback;
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s);
for (;;)
{
state=s->state;
switch(s->state)
{
case SSL_ST_BEFORE:
case SSL_ST_ACCEPT:
case SSL_ST_BEFORE|SSL_ST_ACCEPT:
case SSL_ST_OK|SSL_ST_ACCEPT:
s->server=1;
if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1);
/* s->version=SSL3_VERSION; */
s->type=SSL_ST_ACCEPT;
if (s->init_buf == NULL)
{
if ((buf=BUF_MEM_new()) == NULL)
{
ret= -1;
goto end;
}
if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH))
{
ret= -1;
goto end;
}
s->init_buf=buf;
}
ssl3_init_finished_mac(s);
s->state=SSL23_ST_SR_CLNT_HELLO_A;
s->ctx->stats.sess_accept++;
s->init_num=0;
break;
case SSL23_ST_SR_CLNT_HELLO_A:
case SSL23_ST_SR_CLNT_HELLO_B:
s->shutdown=0;
ret=ssl23_get_client_hello(s);
if (ret >= 0) cb=NULL;
goto end;
/* break; */
default:
SSLerr(SSL_F_SSL23_ACCEPT,SSL_R_UNKNOWN_STATE);
ret= -1;
goto end;
/* break; */
}
if ((cb != NULL) && (s->state != state))
{
new_state=s->state;
s->state=state;
cb(s,SSL_CB_ACCEPT_LOOP,1);
s->state=new_state;
}
}
end:
s->in_handshake--;
if (cb != NULL)
cb(s,SSL_CB_ACCEPT_EXIT,ret);
return(ret);
}
int doit_biopair(SSL *s_ssl, SSL *c_ssl, long count,
clock_t *s_time, clock_t *c_time)
{
long cw_num = count, cr_num = count, sw_num = count, sr_num = count;
BIO *s_ssl_bio = NULL, *c_ssl_bio = NULL;
BIO *server = NULL, *server_io = NULL, *client = NULL, *client_io = NULL;
int ret = 1;
size_t bufsiz = 256; /* small buffer for testing */
if (!BIO_new_bio_pair(&server, bufsiz, &server_io, bufsiz))
goto err;
if (!BIO_new_bio_pair(&client, bufsiz, &client_io, bufsiz))
goto err;
s_ssl_bio = BIO_new(BIO_f_ssl());
if (!s_ssl_bio)
goto err;
c_ssl_bio = BIO_new(BIO_f_ssl());
if (!c_ssl_bio)
goto err;
SSL_set_connect_state(c_ssl);
SSL_set_bio(c_ssl, client, client);
(void)BIO_set_ssl(c_ssl_bio, c_ssl, BIO_NOCLOSE);
SSL_set_accept_state(s_ssl);
SSL_set_bio(s_ssl, server, server);
(void)BIO_set_ssl(s_ssl_bio, s_ssl, BIO_NOCLOSE);
do
{
/* c_ssl_bio: SSL filter BIO
*
* client: pseudo-I/O for SSL library
*
* client_io: client's SSL communication; usually to be
* relayed over some I/O facility, but in this
* test program, we're the server, too:
*
* server_io: server's SSL communication
*
* server: pseudo-I/O for SSL library
*
* s_ssl_bio: SSL filter BIO
*
* The client and the server each employ a "BIO pair":
* client + client_io, server + server_io.
* BIO pairs are symmetric. A BIO pair behaves similar
* to a non-blocking socketpair (but both endpoints must
* be handled by the same thread).
* [Here we could connect client and server to the ends
* of a single BIO pair, but then this code would be less
* suitable as an example for BIO pairs in general.]
*
* Useful functions for querying the state of BIO pair endpoints:
*
* BIO_ctrl_pending(bio) number of bytes we can read now
* BIO_ctrl_get_read_request(bio) number of bytes needed to fulfil
* other side's read attempt
* BIO_ctrl_get_write_guarantee(bio) number of bytes we can write now
*
* ..._read_request is never more than ..._write_guarantee;
* it depends on the application which one you should use.
*/
/* We have non-blocking behaviour throughout this test program, but
* can be sure that there is *some* progress in each iteration; so
* we don't have to worry about ..._SHOULD_READ or ..._SHOULD_WRITE
* -- we just try everything in each iteration
*/
{
/* CLIENT */
MS_STATIC char cbuf[1024*8];
int i, r;
clock_t c_clock = clock();
memset(cbuf, 0, sizeof(cbuf));
if (debug)
if (SSL_in_init(c_ssl))
printf("client waiting in SSL_connect - %s\n",
SSL_state_string_long(c_ssl));
if (cw_num > 0)
{
/* Write to server. */
if (cw_num > (long)sizeof cbuf)
i = sizeof cbuf;
else
i = (int)cw_num;
r = BIO_write(c_ssl_bio, cbuf, i);
if (r < 0)
{
if (!BIO_should_retry(c_ssl_bio))
{
fprintf(stderr,"ERROR in CLIENT\n");
goto err;
}
/* BIO_should_retry(...) can just be ignored here.
* The library expects us to call BIO_write with
* the same arguments again, and that's what we will
* do in the next iteration. */
}
else if (r == 0)
{
fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("client wrote %d\n", r);
cw_num -= r;
}
}
if (cr_num > 0)
{
/* Read from server. */
r = BIO_read(c_ssl_bio, cbuf, sizeof(cbuf));
if (r < 0)
{
if (!BIO_should_retry(c_ssl_bio))
{
fprintf(stderr,"ERROR in CLIENT\n");
goto err;
}
/* Again, "BIO_should_retry" can be ignored. */
}
else if (r == 0)
{
fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("client read %d\n", r);
cr_num -= r;
}
}
/* c_time and s_time increments will typically be very small
* (depending on machine speed and clock tick intervals),
* but sampling over a large number of connections should
* result in fairly accurate figures. We cannot guarantee
* a lot, however -- if each connection lasts for exactly
* one clock tick, it will be counted only for the client
* or only for the server or even not at all.
*/
*c_time += (clock() - c_clock);
}
{
/* SERVER */
MS_STATIC char sbuf[1024*8];
int i, r;
clock_t s_clock = clock();
memset(sbuf, 0, sizeof(sbuf));
if (debug)
if (SSL_in_init(s_ssl))
printf("server waiting in SSL_accept - %s\n",
SSL_state_string_long(s_ssl));
if (sw_num > 0)
{
/* Write to client. */
if (sw_num > (long)sizeof sbuf)
i = sizeof sbuf;
else
i = (int)sw_num;
r = BIO_write(s_ssl_bio, sbuf, i);
if (r < 0)
{
if (!BIO_should_retry(s_ssl_bio))
{
fprintf(stderr,"ERROR in SERVER\n");
goto err;
}
/* Ignore "BIO_should_retry". */
}
else if (r == 0)
{
fprintf(stderr,"SSL SERVER STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("server wrote %d\n", r);
sw_num -= r;
}
}
if (sr_num > 0)
{
/* Read from client. */
r = BIO_read(s_ssl_bio, sbuf, sizeof(sbuf));
if (r < 0)
{
if (!BIO_should_retry(s_ssl_bio))
{
fprintf(stderr,"ERROR in SERVER\n");
goto err;
}
/* blah, blah */
}
else if (r == 0)
{
fprintf(stderr,"SSL SERVER STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("server read %d\n", r);
sr_num -= r;
}
}
*s_time += (clock() - s_clock);
}
{
/* "I/O" BETWEEN CLIENT AND SERVER. */
size_t r1, r2;
BIO *io1 = server_io, *io2 = client_io;
/* we use the non-copying interface for io1
* and the standard BIO_write/BIO_read interface for io2
*/
static int prev_progress = 1;
int progress = 0;
/* io1 to io2 */
do
{
size_t num;
int r;
r1 = BIO_ctrl_pending(io1);
r2 = BIO_ctrl_get_write_guarantee(io2);
num = r1;
if (r2 < num)
num = r2;
if (num)
{
char *dataptr;
if (INT_MAX < num) /* yeah, right */
num = INT_MAX;
r = BIO_nread(io1, &dataptr, (int)num);
assert(r > 0);
assert(r <= (int)num);
/* possibly r < num (non-contiguous data) */
num = r;
r = BIO_write(io2, dataptr, (int)num);
if (r != (int)num) /* can't happen */
{
fprintf(stderr, "ERROR: BIO_write could not write "
"BIO_ctrl_get_write_guarantee() bytes");
goto err;
}
progress = 1;
if (debug)
printf((io1 == client_io) ?
"C->S relaying: %d bytes\n" :
"S->C relaying: %d bytes\n",
(int)num);
}
}
while (r1 && r2);
/* io2 to io1 */
{
size_t num;
int r;
r1 = BIO_ctrl_pending(io2);
r2 = BIO_ctrl_get_read_request(io1);
/* here we could use ..._get_write_guarantee instead of
* ..._get_read_request, but by using the latter
* we test restartability of the SSL implementation
* more thoroughly */
num = r1;
if (r2 < num)
num = r2;
if (num)
{
char *dataptr;
if (INT_MAX < num)
num = INT_MAX;
if (num > 1)
--num; /* test restartability even more thoroughly */
r = BIO_nwrite0(io1, &dataptr);
assert(r > 0);
if (r < (int)num)
num = r;
r = BIO_read(io2, dataptr, (int)num);
if (r != (int)num) /* can't happen */
{
fprintf(stderr, "ERROR: BIO_read could not read "
"BIO_ctrl_pending() bytes");
goto err;
}
progress = 1;
r = BIO_nwrite(io1, &dataptr, (int)num);
if (r != (int)num) /* can't happen */
{
fprintf(stderr, "ERROR: BIO_nwrite() did not accept "
"BIO_nwrite0() bytes");
goto err;
}
if (debug)
printf((io2 == client_io) ?
"C->S relaying: %d bytes\n" :
"S->C relaying: %d bytes\n",
(int)num);
}
} /* no loop, BIO_ctrl_get_read_request now returns 0 anyway */
if (!progress && !prev_progress)
if (cw_num > 0 || cr_num > 0 || sw_num > 0 || sr_num > 0)
{
fprintf(stderr, "ERROR: got stuck\n");
if (strcmp("SSLv2", SSL_get_version(c_ssl)) == 0)
{
fprintf(stderr, "This can happen for SSL2 because "
"CLIENT-FINISHED and SERVER-VERIFY are written \n"
"concurrently ...");
if (strncmp("2SCF", SSL_state_string(c_ssl), 4) == 0
&& strncmp("2SSV", SSL_state_string(s_ssl), 4) == 0)
{
fprintf(stderr, " ok.\n");
goto end;
}
}
fprintf(stderr, " ERROR.\n");
goto err;
}
prev_progress = progress;
}
}
while (cw_num > 0 || cr_num > 0 || sw_num > 0 || sr_num > 0);
if (verbose)
print_details(c_ssl, "DONE via BIO pair: ");
end:
ret = 0;
err:
ERR_print_errors(bio_err);
if (server)
BIO_free(server);
if (server_io)
BIO_free(server_io);
if (client)
BIO_free(client);
if (client_io)
BIO_free(client_io);
if (s_ssl_bio)
BIO_free(s_ssl_bio);
if (c_ssl_bio)
BIO_free(c_ssl_bio);
return ret;
}
int dtls1_accept(SSL *s)
{
BUF_MEM *buf;
unsigned long Time=(unsigned long)time(NULL);
void (*cb)(const SSL *ssl,int type,int val)=NULL;
unsigned long alg_k;
int ret= -1;
int new_state,state,skip=0;
int listen;
RAND_add(&Time,sizeof(Time),0);
ERR_clear_error();
clear_sys_error();
if (s->info_callback != NULL)
cb=s->info_callback;
else if (s->ctx->info_callback != NULL)
cb=s->ctx->info_callback;
listen = s->d1->listen;
/* init things to blank */
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s);
s->d1->listen = listen;
if (s->cert == NULL)
{
SSLerr(SSL_F_DTLS1_ACCEPT,SSL_R_NO_CERTIFICATE_SET);
return(-1);
}
for (;;)
{
state=s->state;
switch (s->state)
{
case SSL_ST_RENEGOTIATE:
s->new_session=1;
/* s->state=SSL_ST_ACCEPT; */
case SSL_ST_BEFORE:
case SSL_ST_ACCEPT:
case SSL_ST_BEFORE|SSL_ST_ACCEPT:
case SSL_ST_OK|SSL_ST_ACCEPT:
s->server=1;
if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1);
if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00))
{
SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR);
return -1;
}
s->type=SSL_ST_ACCEPT;
if (s->init_buf == NULL)
{
if ((buf=BUF_MEM_new()) == NULL)
{
ret= -1;
goto end;
}
if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH))
{
ret= -1;
goto end;
}
s->init_buf=buf;
}
if (!ssl3_setup_buffers(s))
{
ret= -1;
goto end;
}
s->init_num=0;
if (s->state != SSL_ST_RENEGOTIATE)
{
/* Ok, we now need to push on a buffering BIO so that
* the output is sent in a way that TCP likes :-)
*/
if (!ssl_init_wbio_buffer(s,1)) { ret= -1; goto end; }
ssl3_init_finished_mac(s);
s->state=SSL3_ST_SR_CLNT_HELLO_A;
s->ctx->stats.sess_accept++;
}
else
{
/* s->state == SSL_ST_RENEGOTIATE,
* we will just send a HelloRequest */
s->ctx->stats.sess_accept_renegotiate++;
s->state=SSL3_ST_SW_HELLO_REQ_A;
}
break;
case SSL3_ST_SW_HELLO_REQ_A:
case SSL3_ST_SW_HELLO_REQ_B:
s->shutdown=0;
dtls1_start_timer(s);
ret=dtls1_send_hello_request(s);
if (ret <= 0) goto end;
s->s3->tmp.next_state=SSL3_ST_SW_HELLO_REQ_C;
s->state=SSL3_ST_SW_FLUSH;
s->init_num=0;
ssl3_init_finished_mac(s);
break;
case SSL3_ST_SW_HELLO_REQ_C:
s->state=SSL_ST_OK;
break;
case SSL3_ST_SR_CLNT_HELLO_A:
case SSL3_ST_SR_CLNT_HELLO_B:
case SSL3_ST_SR_CLNT_HELLO_C:
s->shutdown=0;
ret=ssl3_get_client_hello(s);
if (ret <= 0) goto end;
dtls1_stop_timer(s);
if (ret == 1 && (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE))
s->state = DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A;
else
s->state = SSL3_ST_SW_SRVR_HELLO_A;
s->init_num=0;
/* Reflect ClientHello sequence to remain stateless while listening */
if (listen)
{
memcpy(s->s3->write_sequence, s->s3->read_sequence, sizeof(s->s3->write_sequence));
}
/* If we're just listening, stop here */
if (listen && s->state == SSL3_ST_SW_SRVR_HELLO_A)
{
ret = 2;
s->d1->listen = 0;
/* Set expected sequence numbers
* to continue the handshake.
*/
s->d1->handshake_read_seq = 2;
s->d1->handshake_write_seq = 1;
s->d1->next_handshake_write_seq = 1;
goto end;
}
break;
case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A:
case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B:
ret = dtls1_send_hello_verify_request(s);
if ( ret <= 0) goto end;
s->state=SSL3_ST_SW_FLUSH;
s->s3->tmp.next_state=SSL3_ST_SR_CLNT_HELLO_A;
/* HelloVerifyRequest resets Finished MAC */
if (s->version != DTLS1_BAD_VER)
ssl3_init_finished_mac(s);
break;
case SSL3_ST_SW_SRVR_HELLO_A:
case SSL3_ST_SW_SRVR_HELLO_B:
s->new_session = 2;
dtls1_start_timer(s);
ret=dtls1_send_server_hello(s);
if (ret <= 0) goto end;
#ifndef OPENSSL_NO_TLSEXT
if (s->hit)
{
if (s->tlsext_ticket_expected)
s->state=SSL3_ST_SW_SESSION_TICKET_A;
else
s->state=SSL3_ST_SW_CHANGE_A;
}
#else
if (s->hit)
s->state=SSL3_ST_SW_CHANGE_A;
#endif
else
s->state=SSL3_ST_SW_CERT_A;
s->init_num=0;
break;
case SSL3_ST_SW_CERT_A:
case SSL3_ST_SW_CERT_B:
/* Check if it is anon DH or normal PSK */
if (!(s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL)
&& !(s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK))
{
dtls1_start_timer(s);
ret=dtls1_send_server_certificate(s);
if (ret <= 0) goto end;
#ifndef OPENSSL_NO_TLSEXT
if (s->tlsext_status_expected)
s->state=SSL3_ST_SW_CERT_STATUS_A;
else
s->state=SSL3_ST_SW_KEY_EXCH_A;
}
else
{
skip = 1;
s->state=SSL3_ST_SW_KEY_EXCH_A;
}
#else
}
else
skip=1;
s->state=SSL3_ST_SW_KEY_EXCH_A;
#endif
s->init_num=0;
break;
case SSL3_ST_SW_KEY_EXCH_A:
case SSL3_ST_SW_KEY_EXCH_B:
alg_k = s->s3->tmp.new_cipher->algorithm_mkey;
/* clear this, it may get reset by
* send_server_key_exchange */
if ((s->options & SSL_OP_EPHEMERAL_RSA)
#ifndef OPENSSL_NO_KRB5
&& !(alg_k & SSL_kKRB5)
#endif /* OPENSSL_NO_KRB5 */
)
/* option SSL_OP_EPHEMERAL_RSA sends temporary RSA key
* even when forbidden by protocol specs
* (handshake may fail as clients are not required to
* be able to handle this) */
s->s3->tmp.use_rsa_tmp=1;
else
s->s3->tmp.use_rsa_tmp=0;
/* only send if a DH key exchange or
* RSA but we have a sign only certificate */
if (s->s3->tmp.use_rsa_tmp
/* PSK: send ServerKeyExchange if PSK identity
* hint if provided */
#ifndef OPENSSL_NO_PSK
|| ((alg_k & SSL_kPSK) && s->ctx->psk_identity_hint)
#endif
|| (alg_k & (SSL_kEDH|SSL_kDHr|SSL_kDHd))
|| (alg_k & SSL_kEECDH)
|| ((alg_k & SSL_kRSA)
&& (s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey == NULL
|| (SSL_C_IS_EXPORT(s->s3->tmp.new_cipher)
&& EVP_PKEY_size(s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey)*8 > SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)
)
)
)
)
{
dtls1_start_timer(s);
ret=dtls1_send_server_key_exchange(s);
if (ret <= 0) goto end;
}
else
skip=1;
s->state=SSL3_ST_SW_CERT_REQ_A;
s->init_num=0;
break;
case SSL3_ST_SW_CERT_REQ_A:
case SSL3_ST_SW_CERT_REQ_B:
if (/* don't request cert unless asked for it: */
!(s->verify_mode & SSL_VERIFY_PEER) ||
/* if SSL_VERIFY_CLIENT_ONCE is set,
* don't request cert during re-negotiation: */
((s->session->peer != NULL) &&
(s->verify_mode & SSL_VERIFY_CLIENT_ONCE)) ||
/* never request cert in anonymous ciphersuites
* (see section "Certificate request" in SSL 3 drafts
* and in RFC 2246): */
((s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) &&
/* ... except when the application insists on verification
* (against the specs, but s3_clnt.c accepts this for SSL 3) */
!(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) ||
/* never request cert in Kerberos ciphersuites */
(s->s3->tmp.new_cipher->algorithm_auth & SSL_aKRB5)
/* With normal PSK Certificates and
* Certificate Requests are omitted */
|| (s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK))
{
/* no cert request */
skip=1;
s->s3->tmp.cert_request=0;
s->state=SSL3_ST_SW_SRVR_DONE_A;
}
else
{
s->s3->tmp.cert_request=1;
dtls1_start_timer(s);
ret=dtls1_send_certificate_request(s);
if (ret <= 0) goto end;
#ifndef NETSCAPE_HANG_BUG
s->state=SSL3_ST_SW_SRVR_DONE_A;
#else
s->state=SSL3_ST_SW_FLUSH;
s->s3->tmp.next_state=SSL3_ST_SR_CERT_A;
#endif
s->init_num=0;
}
break;
case SSL3_ST_SW_SRVR_DONE_A:
case SSL3_ST_SW_SRVR_DONE_B:
dtls1_start_timer(s);
ret=dtls1_send_server_done(s);
if (ret <= 0) goto end;
s->s3->tmp.next_state=SSL3_ST_SR_CERT_A;
s->state=SSL3_ST_SW_FLUSH;
s->init_num=0;
break;
case SSL3_ST_SW_FLUSH:
s->rwstate=SSL_WRITING;
if (BIO_flush(s->wbio) <= 0)
{
ret= -1;
goto end;
}
s->rwstate=SSL_NOTHING;
s->state=s->s3->tmp.next_state;
break;
case SSL3_ST_SR_CERT_A:
case SSL3_ST_SR_CERT_B:
/* Check for second client hello (MS SGC) */
ret = ssl3_check_client_hello(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (ret == 2)
s->state = SSL3_ST_SR_CLNT_HELLO_C;
else {
/* could be sent for a DH cert, even if we
* have not asked for it :-) */
ret=ssl3_get_client_certificate(s);
if (ret <= 0) goto end;
dtls1_stop_timer(s);
s->init_num=0;
s->state=SSL3_ST_SR_KEY_EXCH_A;
}
break;
case SSL3_ST_SR_KEY_EXCH_A:
case SSL3_ST_SR_KEY_EXCH_B:
ret=ssl3_get_client_key_exchange(s);
if (ret <= 0) goto end;
dtls1_stop_timer(s);
s->state=SSL3_ST_SR_CERT_VRFY_A;
s->init_num=0;
if (ret == 2)
{
/* For the ECDH ciphersuites when
* the client sends its ECDH pub key in
* a certificate, the CertificateVerify
* message is not sent.
*/
s->state=SSL3_ST_SR_FINISHED_A;
s->init_num = 0;
}
else
{
s->state=SSL3_ST_SR_CERT_VRFY_A;
s->init_num=0;
/* We need to get hashes here so if there is
* a client cert, it can be verified */
s->method->ssl3_enc->cert_verify_mac(s,
NID_md5,
&(s->s3->tmp.cert_verify_md[0]));
s->method->ssl3_enc->cert_verify_mac(s,
NID_sha1,
&(s->s3->tmp.cert_verify_md[MD5_DIGEST_LENGTH]));
}
break;
case SSL3_ST_SR_CERT_VRFY_A:
case SSL3_ST_SR_CERT_VRFY_B:
s->d1->change_cipher_spec_ok = 1;
/* we should decide if we expected this one */
ret=ssl3_get_cert_verify(s);
if (ret <= 0) goto end;
dtls1_stop_timer(s);
s->state=SSL3_ST_SR_FINISHED_A;
s->init_num=0;
break;
case SSL3_ST_SR_FINISHED_A:
case SSL3_ST_SR_FINISHED_B:
s->d1->change_cipher_spec_ok = 1;
ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A,
SSL3_ST_SR_FINISHED_B);
if (ret <= 0) goto end;
dtls1_stop_timer(s);
if (s->hit)
s->state=SSL_ST_OK;
#ifndef OPENSSL_NO_TLSEXT
else if (s->tlsext_ticket_expected)
s->state=SSL3_ST_SW_SESSION_TICKET_A;
#endif
else
s->state=SSL3_ST_SW_CHANGE_A;
s->init_num=0;
break;
#ifndef OPENSSL_NO_TLSEXT
case SSL3_ST_SW_SESSION_TICKET_A:
case SSL3_ST_SW_SESSION_TICKET_B:
ret=dtls1_send_newsession_ticket(s);
if (ret <= 0) goto end;
s->state=SSL3_ST_SW_CHANGE_A;
s->init_num=0;
break;
case SSL3_ST_SW_CERT_STATUS_A:
case SSL3_ST_SW_CERT_STATUS_B:
ret=ssl3_send_cert_status(s);
if (ret <= 0) goto end;
s->state=SSL3_ST_SW_KEY_EXCH_A;
s->init_num=0;
break;
#endif
case SSL3_ST_SW_CHANGE_A:
case SSL3_ST_SW_CHANGE_B:
s->session->cipher=s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s))
{ ret= -1; goto end; }
ret=dtls1_send_change_cipher_spec(s,
SSL3_ST_SW_CHANGE_A,SSL3_ST_SW_CHANGE_B);
if (ret <= 0) goto end;
s->state=SSL3_ST_SW_FINISHED_A;
s->init_num=0;
if (!s->method->ssl3_enc->change_cipher_state(s,
SSL3_CHANGE_CIPHER_SERVER_WRITE))
{
ret= -1;
goto end;
}
dtls1_reset_seq_numbers(s, SSL3_CC_WRITE);
break;
case SSL3_ST_SW_FINISHED_A:
case SSL3_ST_SW_FINISHED_B:
ret=dtls1_send_finished(s,
SSL3_ST_SW_FINISHED_A,SSL3_ST_SW_FINISHED_B,
s->method->ssl3_enc->server_finished_label,
s->method->ssl3_enc->server_finished_label_len);
if (ret <= 0) goto end;
s->state=SSL3_ST_SW_FLUSH;
if (s->hit)
s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A;
else
s->s3->tmp.next_state=SSL_ST_OK;
s->init_num=0;
break;
case SSL_ST_OK:
/* clean a few things up */
ssl3_cleanup_key_block(s);
#if 0
BUF_MEM_free(s->init_buf);
s->init_buf=NULL;
#endif
/* remove buffering on output */
ssl_free_wbio_buffer(s);
s->init_num=0;
if (s->new_session == 2) /* skipped if we just sent a HelloRequest */
{
/* actually not necessarily a 'new' session unless
* SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */
s->new_session=0;
ssl_update_cache(s,SSL_SESS_CACHE_SERVER);
s->ctx->stats.sess_accept_good++;
/* s->server=1; */
s->handshake_func=dtls1_accept;
if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_DONE,1);
}
ret = 1;
/* done handshaking, next message is client hello */
s->d1->handshake_read_seq = 0;
/* next message is server hello */
s->d1->handshake_write_seq = 0;
s->d1->next_handshake_write_seq = 0;
goto end;
/* break; */
default:
SSLerr(SSL_F_DTLS1_ACCEPT,SSL_R_UNKNOWN_STATE);
ret= -1;
goto end;
/* break; */
}
int doit(SSL *s_ssl, SSL *c_ssl, long count)
{
MS_STATIC char cbuf[1024*8],sbuf[1024*8];
long cw_num=count,cr_num=count;
long sw_num=count,sr_num=count;
int ret=1;
BIO *c_to_s=NULL;
BIO *s_to_c=NULL;
BIO *c_bio=NULL;
BIO *s_bio=NULL;
int c_r,c_w,s_r,s_w;
int c_want,s_want;
int i,j;
int done=0;
int c_write,s_write;
int do_server=0,do_client=0;
memset(cbuf,0,sizeof(cbuf));
memset(sbuf,0,sizeof(sbuf));
c_to_s=BIO_new(BIO_s_mem());
s_to_c=BIO_new(BIO_s_mem());
if ((s_to_c == NULL) || (c_to_s == NULL))
{
ERR_print_errors(bio_err);
goto err;
}
c_bio=BIO_new(BIO_f_ssl());
s_bio=BIO_new(BIO_f_ssl());
if ((c_bio == NULL) || (s_bio == NULL))
{
ERR_print_errors(bio_err);
goto err;
}
SSL_set_connect_state(c_ssl);
SSL_set_bio(c_ssl,s_to_c,c_to_s);
BIO_set_ssl(c_bio,c_ssl,BIO_NOCLOSE);
SSL_set_accept_state(s_ssl);
SSL_set_bio(s_ssl,c_to_s,s_to_c);
BIO_set_ssl(s_bio,s_ssl,BIO_NOCLOSE);
c_r=0; s_r=1;
c_w=1; s_w=0;
c_want=W_WRITE;
s_want=0;
c_write=1,s_write=0;
/* We can always do writes */
for (;;)
{
do_server=0;
do_client=0;
i=(int)BIO_pending(s_bio);
if ((i && s_r) || s_w) do_server=1;
i=(int)BIO_pending(c_bio);
if ((i && c_r) || c_w) do_client=1;
if (do_server && debug)
{
if (SSL_in_init(s_ssl))
printf("server waiting in SSL_accept - %s\n",
SSL_state_string_long(s_ssl));
/* else if (s_write)
printf("server:SSL_write()\n");
else
printf("server:SSL_read()\n"); */
}
if (do_client && debug)
{
if (SSL_in_init(c_ssl))
printf("client waiting in SSL_connect - %s\n",
SSL_state_string_long(c_ssl));
/* else if (c_write)
printf("client:SSL_write()\n");
else
printf("client:SSL_read()\n"); */
}
if (!do_client && !do_server)
{
fprintf(stdout,"ERROR IN STARTUP\n");
ERR_print_errors(bio_err);
break;
}
if (do_client && !(done & C_DONE))
{
if (c_write)
{
j=(cw_num > (long)sizeof(cbuf))
?sizeof(cbuf):(int)cw_num;
i=BIO_write(c_bio,cbuf,j);
if (i < 0)
{
c_r=0;
c_w=0;
if (BIO_should_retry(c_bio))
{
if (BIO_should_read(c_bio))
c_r=1;
if (BIO_should_write(c_bio))
c_w=1;
}
else
{
fprintf(stderr,"ERROR in CLIENT\n");
ERR_print_errors(bio_err);
goto err;
}
}
else if (i == 0)
{
fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("client wrote %d\n",i);
/* ok */
s_r=1;
c_write=0;
cw_num-=i;
}
}
else
{
i=BIO_read(c_bio,cbuf,sizeof(cbuf));
if (i < 0)
{
c_r=0;
c_w=0;
if (BIO_should_retry(c_bio))
{
if (BIO_should_read(c_bio))
c_r=1;
if (BIO_should_write(c_bio))
c_w=1;
}
else
{
fprintf(stderr,"ERROR in CLIENT\n");
ERR_print_errors(bio_err);
goto err;
}
}
else if (i == 0)
{
fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
goto err;
}
else
{
if (debug)
printf("client read %d\n",i);
cr_num-=i;
if (sw_num > 0)
{
s_write=1;
s_w=1;
}
if (cr_num <= 0)
{
s_write=1;
s_w=1;
done=S_DONE|C_DONE;
}
}
}
}
if (do_server && !(done & S_DONE))
{
if (!s_write)
{
i=BIO_read(s_bio,sbuf,sizeof(cbuf));
if (i < 0)
{
s_r=0;
s_w=0;
if (BIO_should_retry(s_bio))
{
if (BIO_should_read(s_bio))
s_r=1;
if (BIO_should_write(s_bio))
s_w=1;
}
else
{
fprintf(stderr,"ERROR in SERVER\n");
ERR_print_errors(bio_err);
goto err;
}
}
else if (i == 0)
{
ERR_print_errors(bio_err);
fprintf(stderr,"SSL SERVER STARTUP FAILED in SSL_read\n");
goto err;
}
else
{
if (debug)
printf("server read %d\n",i);
sr_num-=i;
if (cw_num > 0)
{
c_write=1;
c_w=1;
}
if (sr_num <= 0)
{
s_write=1;
s_w=1;
c_write=0;
}
}
}
else
{
j=(sw_num > (long)sizeof(sbuf))?
sizeof(sbuf):(int)sw_num;
i=BIO_write(s_bio,sbuf,j);
if (i < 0)
{
s_r=0;
s_w=0;
if (BIO_should_retry(s_bio))
{
if (BIO_should_read(s_bio))
s_r=1;
if (BIO_should_write(s_bio))
s_w=1;
}
else
{
fprintf(stderr,"ERROR in SERVER\n");
ERR_print_errors(bio_err);
goto err;
}
}
else if (i == 0)
{
ERR_print_errors(bio_err);
fprintf(stderr,"SSL SERVER STARTUP FAILED in SSL_write\n");
goto err;
}
else
{
if (debug)
printf("server wrote %d\n",i);
sw_num-=i;
s_write=0;
c_r=1;
if (sw_num <= 0)
done|=S_DONE;
}
}
}
if ((done & S_DONE) && (done & C_DONE)) break;
}
if (verbose)
print_details(c_ssl, "DONE: ");
ret=0;
err:
/* We have to set the BIO's to NULL otherwise they will be
* OPENSSL_free()ed twice. Once when th s_ssl is SSL_free()ed and
* again when c_ssl is SSL_free()ed.
* This is a hack required because s_ssl and c_ssl are sharing the same
* BIO structure and SSL_set_bio() and SSL_free() automatically
* BIO_free non NULL entries.
* You should not normally do this or be required to do this */
if (s_ssl != NULL)
{
s_ssl->rbio=NULL;
s_ssl->wbio=NULL;
}
if (c_ssl != NULL)
{
c_ssl->rbio=NULL;
c_ssl->wbio=NULL;
}
if (c_to_s != NULL) BIO_free(c_to_s);
if (s_to_c != NULL) BIO_free(s_to_c);
if (c_bio != NULL) BIO_free_all(c_bio);
if (s_bio != NULL) BIO_free_all(s_bio);
return(ret);
}
int dtls1_accept(SSL *s)
{
void (*cb)(const SSL *ssl, int type, int val) = NULL;
unsigned long alg_k;
int ret = -1;
int new_state, state, skip = 0;
int listen;
ERR_clear_error();
errno = 0;
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
listen = s->d1->listen;
/* init things to blank */
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s))
SSL_clear(s);
s->d1->listen = listen;
if (s->cert == NULL) {
SSLerr(SSL_F_DTLS1_ACCEPT, SSL_R_NO_CERTIFICATE_SET);
return (-1);
}
for (;;) {
state = s->state;
switch (s->state) {
case SSL_ST_RENEGOTIATE:
s->renegotiate = 1;
/* s->state=SSL_ST_ACCEPT; */
case SSL_ST_BEFORE:
case SSL_ST_ACCEPT:
case SSL_ST_BEFORE | SSL_ST_ACCEPT:
case SSL_ST_OK | SSL_ST_ACCEPT:
s->server = 1;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_START, 1);
if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00)) {
SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR);
return -1;
}
s->type = SSL_ST_ACCEPT;
if (s->init_buf == NULL) {
BUF_MEM *buf;
if ((buf = BUF_MEM_new()) == NULL) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
BUF_MEM_free(buf);
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
s->init_buf = buf;
}
if (!ssl3_setup_buffers(s)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
s->init_num = 0;
s->d1->change_cipher_spec_ok = 0;
/* Should have been reset by ssl3_get_finished, too. */
s->s3->change_cipher_spec = 0;
if (s->state != SSL_ST_RENEGOTIATE) {
/*
* Ok, we now need to push on a buffering BIO so that
* the output is sent in a way that TCP likes :-)
* ...but not with SCTP :-)
*/
if (!ssl_init_wbio_buffer(s, 1)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
tls1_init_finished_mac(s);
s->state = SSL3_ST_SR_CLNT_HELLO_A;
s->ctx->stats.sess_accept++;
} else if (!s->s3->send_connection_binding) {
/*
* Server attempting to renegotiate with client that doesn't
* support secure renegotiation.
*/
SSLerr(SSL_F_DTLS1_ACCEPT,
SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED);
ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_HANDSHAKE_FAILURE);
ret = -1;
s->state = SSL_ST_ERR;
goto end;
} else {
/* s->state == SSL_ST_RENEGOTIATE,
* we will just send a HelloRequest */
s->ctx->stats.sess_accept_renegotiate++;
s->state = SSL3_ST_SW_HELLO_REQ_A;
}
break;
case SSL3_ST_SW_HELLO_REQ_A:
case SSL3_ST_SW_HELLO_REQ_B:
s->shutdown = 0;
dtls1_clear_sent_buffer(s);
dtls1_start_timer(s);
ret = ssl3_send_hello_request(s);
if (ret <= 0)
goto end;
s->s3->tmp.next_state = SSL3_ST_SR_CLNT_HELLO_A;
s->state = SSL3_ST_SW_FLUSH;
s->init_num = 0;
tls1_init_finished_mac(s);
break;
case SSL3_ST_SW_HELLO_REQ_C:
s->state = SSL_ST_OK;
break;
case SSL3_ST_SR_CLNT_HELLO_A:
case SSL3_ST_SR_CLNT_HELLO_B:
case SSL3_ST_SR_CLNT_HELLO_C:
s->shutdown = 0;
ret = ssl3_get_client_hello(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (ret == 1 && (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE))
s->state = DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A;
else
s->state = SSL3_ST_SW_SRVR_HELLO_A;
s->init_num = 0;
/* Reflect ClientHello sequence to remain stateless while listening */
if (listen) {
memcpy(s->s3->write_sequence, s->s3->read_sequence,
sizeof(s->s3->write_sequence));
}
/* If we're just listening, stop here */
if (listen && s->state == SSL3_ST_SW_SRVR_HELLO_A) {
ret = 2;
s->d1->listen = 0;
/*
* Set expected sequence numbers
* to continue the handshake.
*/
s->d1->handshake_read_seq = 2;
s->d1->handshake_write_seq = 1;
s->d1->next_handshake_write_seq = 1;
goto end;
}
break;
case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A:
case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B:
ret = dtls1_send_hello_verify_request(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_FLUSH;
s->s3->tmp.next_state = SSL3_ST_SR_CLNT_HELLO_A;
/* HelloVerifyRequest resets Finished MAC */
tls1_init_finished_mac(s);
break;
case SSL3_ST_SW_SRVR_HELLO_A:
case SSL3_ST_SW_SRVR_HELLO_B:
s->renegotiate = 2;
dtls1_start_timer(s);
ret = ssl3_send_server_hello(s);
if (ret <= 0)
goto end;
if (s->hit) {
if (s->tlsext_ticket_expected)
s->state = SSL3_ST_SW_SESSION_TICKET_A;
else
s->state = SSL3_ST_SW_CHANGE_A;
} else
s->state = SSL3_ST_SW_CERT_A;
s->init_num = 0;
break;
case SSL3_ST_SW_CERT_A:
case SSL3_ST_SW_CERT_B:
/* Check if it is anon DH. */
if (!(s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL)) {
dtls1_start_timer(s);
ret = ssl3_send_server_certificate(s);
if (ret <= 0)
goto end;
if (s->tlsext_status_expected)
s->state = SSL3_ST_SW_CERT_STATUS_A;
else
s->state = SSL3_ST_SW_KEY_EXCH_A;
} else {
skip = 1;
s->state = SSL3_ST_SW_KEY_EXCH_A;
}
s->init_num = 0;
break;
case SSL3_ST_SW_KEY_EXCH_A:
case SSL3_ST_SW_KEY_EXCH_B:
alg_k = s->s3->tmp.new_cipher->algorithm_mkey;
/* only send if a DH key exchange */
if (alg_k & (SSL_kDHE | SSL_kECDHE)) {
dtls1_start_timer(s);
ret = ssl3_send_server_key_exchange(s);
if (ret <= 0)
goto end;
} else
skip = 1;
s->state = SSL3_ST_SW_CERT_REQ_A;
s->init_num = 0;
break;
case SSL3_ST_SW_CERT_REQ_A:
case SSL3_ST_SW_CERT_REQ_B:
/*
* Determine whether or not we need to request a
* certificate.
*
* Do not request a certificate if:
*
* - We did not ask for it (SSL_VERIFY_PEER is unset).
*
* - SSL_VERIFY_CLIENT_ONCE is set and we are
* renegotiating.
*
* - We are using an anonymous ciphersuites
* (see section "Certificate request" in SSL 3 drafts
* and in RFC 2246) ... except when the application
* insists on verification (against the specs, but
* s3_clnt.c accepts this for SSL 3).
*/
if (!(s->verify_mode & SSL_VERIFY_PEER) ||
((s->session->peer != NULL) &&
(s->verify_mode & SSL_VERIFY_CLIENT_ONCE)) ||
((s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) &&
!(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)))
{
/* no cert request */
skip = 1;
s->s3->tmp.cert_request = 0;
s->state = SSL3_ST_SW_SRVR_DONE_A;
} else {
s->s3->tmp.cert_request = 1;
dtls1_start_timer(s);
ret = ssl3_send_certificate_request(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_SRVR_DONE_A;
s->init_num = 0;
}
break;
case SSL3_ST_SW_SRVR_DONE_A:
case SSL3_ST_SW_SRVR_DONE_B:
dtls1_start_timer(s);
ret = ssl3_send_server_done(s);
if (ret <= 0)
goto end;
s->s3->tmp.next_state = SSL3_ST_SR_CERT_A;
s->state = SSL3_ST_SW_FLUSH;
s->init_num = 0;
break;
case SSL3_ST_SW_FLUSH:
s->rwstate = SSL_WRITING;
if (BIO_flush(s->wbio) <= 0) {
/* If the write error was fatal, stop trying */
if (!BIO_should_retry(s->wbio)) {
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
}
ret = -1;
goto end;
}
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
break;
case SSL3_ST_SR_CERT_A:
case SSL3_ST_SR_CERT_B:
if (s->s3->tmp.cert_request) {
ret = ssl3_get_client_certificate(s);
if (ret <= 0)
goto end;
}
s->init_num = 0;
s->state = SSL3_ST_SR_KEY_EXCH_A;
break;
case SSL3_ST_SR_KEY_EXCH_A:
case SSL3_ST_SR_KEY_EXCH_B:
ret = ssl3_get_client_key_exchange(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SR_CERT_VRFY_A;
s->init_num = 0;
if (ret == 2) {
/* For the ECDH ciphersuites when
* the client sends its ECDH pub key in
* a certificate, the CertificateVerify
* message is not sent.
*/
s->state = SSL3_ST_SR_FINISHED_A;
s->init_num = 0;
} else if (SSL_USE_SIGALGS(s)) {
s->state = SSL3_ST_SR_CERT_VRFY_A;
s->init_num = 0;
if (!s->session->peer)
break;
/*
* For sigalgs freeze the handshake buffer
* at this point and digest cached records.
*/
if (!s->s3->handshake_buffer) {
SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR);
s->state = SSL_ST_ERR;
return -1;
}
s->s3->flags |= TLS1_FLAGS_KEEP_HANDSHAKE;
if (!tls1_digest_cached_records(s)) {
s->state = SSL_ST_ERR;
return -1;
}
} else {
s->state = SSL3_ST_SR_CERT_VRFY_A;
s->init_num = 0;
/* We need to get hashes here so if there is
* a client cert, it can be verified */
s->method->ssl3_enc->cert_verify_mac(s, NID_md5,
&(s->s3->tmp.cert_verify_md[0]));
s->method->ssl3_enc->cert_verify_mac(
s, NID_sha1, &(s->s3->tmp.cert_verify_md[MD5_DIGEST_LENGTH]));
}
break;
case SSL3_ST_SR_CERT_VRFY_A:
case SSL3_ST_SR_CERT_VRFY_B:
ret = ssl3_get_cert_verify(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SR_FINISHED_A;
s->init_num = 0;
break;
case SSL3_ST_SR_FINISHED_A:
case SSL3_ST_SR_FINISHED_B:
/*
* Enable CCS. Receiving a CCS clears the flag, so make
* sure not to re-enable it to ban duplicates. This *should* be the
* first time we have received one - but we check anyway to be
* cautious.
* s->s3->change_cipher_spec is set when a CCS is
* processed in d1_pkt.c, and remains set until
* the client's Finished message is read.
*/
if (!s->s3->change_cipher_spec)
s->d1->change_cipher_spec_ok = 1;
ret = ssl3_get_finished(s, SSL3_ST_SR_FINISHED_A, SSL3_ST_SR_FINISHED_B);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->hit)
s->state = SSL_ST_OK;
else if (s->tlsext_ticket_expected)
s->state = SSL3_ST_SW_SESSION_TICKET_A;
else
s->state = SSL3_ST_SW_CHANGE_A;
s->init_num = 0;
break;
case SSL3_ST_SW_SESSION_TICKET_A:
case SSL3_ST_SW_SESSION_TICKET_B:
ret = ssl3_send_newsession_ticket(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_CHANGE_A;
s->init_num = 0;
break;
case SSL3_ST_SW_CERT_STATUS_A:
case SSL3_ST_SW_CERT_STATUS_B:
ret = ssl3_send_cert_status(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_KEY_EXCH_A;
s->init_num = 0;
break;
case SSL3_ST_SW_CHANGE_A:
case SSL3_ST_SW_CHANGE_B:
s->session->cipher = s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
ret = dtls1_send_change_cipher_spec(s, SSL3_ST_SW_CHANGE_A,
SSL3_ST_SW_CHANGE_B);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_FINISHED_A;
s->init_num = 0;
if (!s->method->ssl3_enc->change_cipher_state(s,
SSL3_CHANGE_CIPHER_SERVER_WRITE))
{
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
dtls1_reset_seq_numbers(s, SSL3_CC_WRITE);
break;
case SSL3_ST_SW_FINISHED_A:
case SSL3_ST_SW_FINISHED_B:
ret = ssl3_send_finished(s, SSL3_ST_SW_FINISHED_A, SSL3_ST_SW_FINISHED_B,
s->method->ssl3_enc->server_finished_label,
s->method->ssl3_enc->server_finished_label_len);
if (ret <= 0)
goto end;
s->state = SSL3_ST_SW_FLUSH;
if (s->hit) {
s->s3->tmp.next_state = SSL3_ST_SR_FINISHED_A;
} else {
s->s3->tmp.next_state = SSL_ST_OK;
}
s->init_num = 0;
break;
case SSL_ST_OK:
/* clean a few things up */
ssl3_cleanup_key_block(s);
/* remove buffering on output */
ssl_free_wbio_buffer(s);
s->init_num = 0;
if (s->renegotiate == 2) /* skipped if we just sent a HelloRequest */
{
s->renegotiate = 0;
s->new_session = 0;
ssl_update_cache(s, SSL_SESS_CACHE_SERVER);
s->ctx->stats.sess_accept_good++;
/* s->server=1; */
s->handshake_func = dtls1_accept;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_DONE, 1);
}
ret = 1;
/* done handshaking, next message is client hello */
s->d1->handshake_read_seq = 0;
/* next message is server hello */
s->d1->handshake_write_seq = 0;
s->d1->next_handshake_write_seq = 0;
dtls1_clear_received_buffer(s);
goto end;
/* break; */
case SSL_ST_ERR:
default:
SSLerr(SSL_F_DTLS1_ACCEPT, SSL_R_UNKNOWN_STATE);
ret = -1;
goto end;
/* break; */
}
if (!s->s3->tmp.reuse_message && !skip) {
if (s->debug) {
if ((ret = BIO_flush(s->wbio)) <= 0)
goto end;
}
if ((cb != NULL) && (s->state != state)) {
new_state = s->state;
s->state = state;
cb(s, SSL_CB_ACCEPT_LOOP, 1);
s->state = new_state;
}
}
skip = 0;
}
end:
/* BIO_flush(s->wbio); */
s->in_handshake--;
if (cb != NULL)
cb(s, SSL_CB_ACCEPT_EXIT, ret);
return ret;
}
int ssl23_connect(SSL *s)
{
BUF_MEM *buf=NULL;
unsigned long Time=(unsigned long)time(NULL);
void (*cb)(const SSL *ssl,int type,int val)=NULL;
int ret= -1;
int new_state,state;
RAND_add(&Time,sizeof(Time),0);
ERR_clear_error();
clear_sys_error();
if (s->info_callback != NULL)
cb=s->info_callback;
else if (s->ctx->info_callback != NULL)
cb=s->ctx->info_callback;
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s);
for (;;)
{
state=s->state;
switch(s->state)
{
case SSL_ST_BEFORE:
case SSL_ST_CONNECT:
case SSL_ST_BEFORE|SSL_ST_CONNECT:
case SSL_ST_OK|SSL_ST_CONNECT:
if (s->session != NULL)
{
SSLerr(SSL_F_SSL23_CONNECT,SSL_R_SSL23_DOING_SESSION_ID_REUSE);
ret= -1;
goto end;
}
s->server=0;
if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1);
/* s->version=TLS1_VERSION; */
s->type=SSL_ST_CONNECT;
if (s->init_buf == NULL)
{
if ((buf=BUF_MEM_new()) == NULL)
{
ret= -1;
goto end;
}
if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH))
{
ret= -1;
goto end;
}
s->init_buf=buf;
buf=NULL;
}
if (!ssl3_setup_buffers(s)) {
ret= -1;
goto end;
}
ssl3_init_finished_mac(s);
s->state=SSL23_ST_CW_CLNT_HELLO_A;
s->ctx->stats.sess_connect++;
s->init_num=0;
break;
case SSL23_ST_CW_CLNT_HELLO_A:
case SSL23_ST_CW_CLNT_HELLO_B:
s->shutdown=0;
ret=ssl23_client_hello(s);
if (ret <= 0) goto end;
s->state=SSL23_ST_CR_SRVR_HELLO_A;
s->init_num=0;
break;
case SSL23_ST_CR_SRVR_HELLO_A:
case SSL23_ST_CR_SRVR_HELLO_B:
ret=ssl23_get_server_hello(s);
if (ret >= 0) cb=NULL;
goto end;
/* break; */
default:
SSLerr(SSL_F_SSL23_CONNECT,SSL_R_UNKNOWN_STATE);
ret= -1;
goto end;
/* break; */
}
if (s->debug) {
(void)BIO_flush(s->wbio);
}
if ((cb != NULL) && (s->state != state))
{
new_state=s->state;
s->state=state;
cb(s,SSL_CB_CONNECT_LOOP,1);
s->state=new_state;
}
}
end:
s->in_handshake--;
if (buf != NULL)
BUF_MEM_free(buf);
if (cb != NULL)
cb(s,SSL_CB_CONNECT_EXIT,ret);
return(ret);
}
static void do_reneg_setup_step(const SSL_TEST_CTX *test_ctx, PEER *peer)
{
int ret;
char buf;
TEST_check(peer->status == PEER_RETRY);
TEST_check(test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_SERVER
|| test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_CLIENT);
/* Check if we are the peer that is going to initiate */
if ((test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_SERVER
&& SSL_is_server(peer->ssl))
|| (test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_CLIENT
&& !SSL_is_server(peer->ssl))) {
/*
* If we already asked for a renegotiation then fall through to the
* SSL_read() below.
*/
if (!SSL_renegotiate_pending(peer->ssl)) {
/*
* If we are the client we will always attempt to resume the
* session. The server may or may not resume dependant on the
* setting of SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
*/
if (SSL_is_server(peer->ssl))
ret = SSL_renegotiate(peer->ssl);
else
ret = SSL_renegotiate_abbreviated(peer->ssl);
if (!ret) {
peer->status = PEER_ERROR;
return;
}
do_handshake_step(peer);
/*
* If status is PEER_RETRY it means we're waiting on the peer to
* continue the handshake. As far as setting up the renegotiation is
* concerned that is a success. The next step will continue the
* handshake to its conclusion.
*
* If status is PEER_SUCCESS then we are the server and we have
* successfully sent the HelloRequest. We need to continue to wait
* until the handshake arrives from the client.
*/
if (peer->status == PEER_RETRY)
peer->status = PEER_SUCCESS;
else if (peer->status == PEER_SUCCESS)
peer->status = PEER_RETRY;
return;
}
}
/*
* The SSL object is still expecting app data, even though it's going to
* get a handshake message. We try to read, and it should fail - after which
* we should be in a handshake
*/
ret = SSL_read(peer->ssl, &buf, sizeof(buf));
if (ret >= 0) {
/*
* We're not actually expecting data - we're expecting a reneg to
* start
*/
peer->status = PEER_ERROR;
return;
} else {
int error = SSL_get_error(peer->ssl, ret);
if (error != SSL_ERROR_WANT_READ) {
peer->status = PEER_ERROR;
return;
}
/* If we're no in init yet then we're not done with setup yet */
if (!SSL_in_init(peer->ssl))
return;
}
peer->status = PEER_SUCCESS;
}
int ssl2_pending(const SSL *s)
{
return SSL_in_init(s) ? 0 : s->s2->ract_data_length;
}
