void
ClientPaintedLayer::RenderLayerWithReadback(ReadbackProcessor *aReadback)
{
RenderMaskLayers(this);
if (!EnsureContentClient()) {
return;
}
if (CanRecordLayer(aReadback)) {
if (PaintOffMainThread()) {
return;
}
}
nsTArray<ReadbackProcessor::Update> readbackUpdates;
nsIntRegion readbackRegion;
if (aReadback && UsedForReadback()) {
aReadback->GetPaintedLayerUpdates(this, &readbackUpdates);
}
PaintThebes(&readbackUpdates);
}
void
BasicThebesLayer::PaintThebes(gfxContext* aContext,
Layer* aMaskLayer,
LayerManager::DrawThebesLayerCallback aCallback,
void* aCallbackData,
ReadbackProcessor* aReadback)
{
PROFILER_LABEL("BasicThebesLayer", "PaintThebes");
NS_ASSERTION(BasicManager()->InDrawing(),
"Can only draw in drawing phase");
nsRefPtr<gfxASurface> targetSurface = aContext->CurrentSurface();
if (!mContentClient) {
// we pass a null pointer for the Forwarder argument, which means
// this will not have a ContentHost on the other side.
mContentClient = new ContentClientBasic(nullptr, BasicManager());
}
nsTArray<ReadbackProcessor::Update> readbackUpdates;
if (aReadback && UsedForReadback()) {
aReadback->GetThebesLayerUpdates(this, &readbackUpdates);
}
//TODO: This is going to copy back pixels that we might end up
// drawing over anyway. It would be nice if we could avoid
// this duplication.
mContentClient->SyncFrontBufferToBackBuffer();
bool canUseOpaqueSurface = CanUseOpaqueSurface();
ContentType contentType =
canUseOpaqueSurface ? gfxASurface::CONTENT_COLOR :
gfxASurface::CONTENT_COLOR_ALPHA;
float opacity = GetEffectiveOpacity();
if (!BasicManager()->IsRetained()) {
NS_ASSERTION(readbackUpdates.IsEmpty(), "Can't do readback for non-retained layer");
mValidRegion.SetEmpty();
mContentClient->Clear();
nsIntRegion toDraw = IntersectWithClip(GetEffectiveVisibleRegion(), aContext);
RenderTraceInvalidateStart(this, "FFFF00", toDraw.GetBounds());
if (!toDraw.IsEmpty() && !IsHidden()) {
if (!aCallback) {
BasicManager()->SetTransactionIncomplete();
return;
}
aContext->Save();
bool needsClipToVisibleRegion = GetClipToVisibleRegion();
bool needsGroup =
opacity != 1.0 || GetOperator() != gfxContext::OPERATOR_OVER || aMaskLayer;
nsRefPtr<gfxContext> groupContext;
if (needsGroup) {
groupContext =
BasicManager()->PushGroupForLayer(aContext, this, toDraw,
&needsClipToVisibleRegion);
if (GetOperator() != gfxContext::OPERATOR_OVER) {
needsClipToVisibleRegion = true;
}
} else {
groupContext = aContext;
}
SetAntialiasingFlags(this, groupContext);
aCallback(this, groupContext, toDraw, CLIP_NONE, nsIntRegion(), aCallbackData);
if (needsGroup) {
BasicManager()->PopGroupToSourceWithCachedSurface(aContext, groupContext);
if (needsClipToVisibleRegion) {
gfxUtils::ClipToRegion(aContext, toDraw);
}
AutoSetOperator setOperator(aContext, GetOperator());
PaintWithMask(aContext, opacity, aMaskLayer);
}
aContext->Restore();
}
RenderTraceInvalidateEnd(this, "FFFF00");
return;
}
{
uint32_t flags = 0;
#ifndef MOZ_WIDGET_ANDROID
if (BasicManager()->CompositorMightResample()) {
flags |= ThebesLayerBuffer::PAINT_WILL_RESAMPLE;
}
if (!(flags & ThebesLayerBuffer::PAINT_WILL_RESAMPLE)) {
if (MayResample()) {
flags |= ThebesLayerBuffer::PAINT_WILL_RESAMPLE;
}
}
#endif
if (mDrawAtomically) {
flags |= ThebesLayerBuffer::PAINT_NO_ROTATION;
}
PaintState state =
mContentClient->BeginPaintBuffer(this, contentType, flags);
mValidRegion.Sub(mValidRegion, state.mRegionToInvalidate);
if (state.mContext) {
// The area that became invalid and is visible needs to be repainted
// (this could be the whole visible area if our buffer switched
// from RGB to RGBA, because we might need to repaint with
// subpixel AA)
state.mRegionToInvalidate.And(state.mRegionToInvalidate,
GetEffectiveVisibleRegion());
nsIntRegion extendedDrawRegion = state.mRegionToDraw;
SetAntialiasingFlags(this, state.mContext);
RenderTraceInvalidateStart(this, "FFFF00", state.mRegionToDraw.GetBounds());
PaintBuffer(state.mContext,
state.mRegionToDraw, extendedDrawRegion, state.mRegionToInvalidate,
state.mDidSelfCopy,
state.mClip,
aCallback, aCallbackData);
MOZ_LAYERS_LOG_IF_SHADOWABLE(this, ("Layer::Mutated(%p) PaintThebes", this));
Mutated();
RenderTraceInvalidateEnd(this, "FFFF00");
} else {
// It's possible that state.mRegionToInvalidate is nonempty here,
// if we are shrinking the valid region to nothing. So use mRegionToDraw
// instead.
NS_WARN_IF_FALSE(state.mRegionToDraw.IsEmpty(),
"No context when we have something to draw, resource exhaustion?");
}
}
if (BasicManager()->IsTransactionIncomplete())
return;
gfxRect clipExtents;
clipExtents = aContext->GetClipExtents();
// Pull out the mask surface and transform here, because the mask
// is internal to basic layers
AutoMaskData mask;
gfxASurface* maskSurface = nullptr;
const gfxMatrix* maskTransform = nullptr;
if (GetMaskData(aMaskLayer, &mask)) {
maskSurface = mask.GetSurface();
maskTransform = &mask.GetTransform();
}
if (!IsHidden() && !clipExtents.IsEmpty()) {
AutoSetOperator setOperator(aContext, GetOperator());
mContentClient->DrawTo(this, aContext, opacity, maskSurface, maskTransform);
}
for (uint32_t i = 0; i < readbackUpdates.Length(); ++i) {
ReadbackProcessor::Update& update = readbackUpdates[i];
nsIntPoint offset = update.mLayer->GetBackgroundLayerOffset();
nsRefPtr<gfxContext> ctx =
update.mLayer->GetSink()->BeginUpdate(update.mUpdateRect + offset,
update.mSequenceCounter);
if (ctx) {
NS_ASSERTION(opacity == 1.0, "Should only read back opaque layers");
ctx->Translate(gfxPoint(offset.x, offset.y));
mContentClient->DrawTo(this, ctx, 1.0, maskSurface, maskTransform);
update.mLayer->GetSink()->EndUpdate(ctx, update.mUpdateRect + offset);
}
}
}
void
BasicThebesLayer::PaintThebes(gfxContext* aContext,
Layer* aMaskLayer,
LayerManager::DrawThebesLayerCallback aCallback,
void* aCallbackData,
ReadbackProcessor* aReadback)
{
PROFILER_LABEL("BasicThebesLayer", "PaintThebes");
NS_ASSERTION(BasicManager()->InDrawing(),
"Can only draw in drawing phase");
nsTArray<ReadbackProcessor::Update> readbackUpdates;
if (aReadback && UsedForReadback()) {
aReadback->GetThebesLayerUpdates(this, &readbackUpdates);
}
float opacity = GetEffectiveOpacity();
CompositionOp effectiveOperator = GetEffectiveOperator(this);
if (!BasicManager()->IsRetained()) {
NS_ASSERTION(readbackUpdates.IsEmpty(), "Can't do readback for non-retained layer");
mValidRegion.SetEmpty();
mContentClient->Clear();
nsIntRegion toDraw = IntersectWithClip(GetEffectiveVisibleRegion(), aContext);
RenderTraceInvalidateStart(this, "FFFF00", toDraw.GetBounds());
if (!toDraw.IsEmpty() && !IsHidden()) {
if (!aCallback) {
BasicManager()->SetTransactionIncomplete();
return;
}
aContext->Save();
bool needsClipToVisibleRegion = GetClipToVisibleRegion();
bool needsGroup = opacity != 1.0 ||
effectiveOperator != CompositionOp::OP_OVER ||
aMaskLayer;
nsRefPtr<gfxContext> groupContext;
if (needsGroup) {
groupContext =
BasicManager()->PushGroupForLayer(aContext, this, toDraw,
&needsClipToVisibleRegion);
if (effectiveOperator != CompositionOp::OP_OVER) {
needsClipToVisibleRegion = true;
}
} else {
groupContext = aContext;
}
SetAntialiasingFlags(this, groupContext);
aCallback(this, groupContext, toDraw, DrawRegionClip::CLIP_NONE, nsIntRegion(), aCallbackData);
if (needsGroup) {
BasicManager()->PopGroupToSourceWithCachedSurface(aContext, groupContext);
if (needsClipToVisibleRegion) {
gfxUtils::ClipToRegion(aContext, toDraw);
}
AutoSetOperator setOptimizedOperator(aContext, ThebesOp(effectiveOperator));
PaintWithMask(aContext, opacity, aMaskLayer);
}
aContext->Restore();
}
RenderTraceInvalidateEnd(this, "FFFF00");
return;
}
if (BasicManager()->IsTransactionIncomplete())
return;
gfxRect clipExtents;
clipExtents = aContext->GetClipExtents();
// Pull out the mask surface and transform here, because the mask
// is internal to basic layers
AutoMoz2DMaskData mask;
SourceSurface* maskSurface = nullptr;
Matrix maskTransform;
if (GetMaskData(aMaskLayer, &mask)) {
maskSurface = mask.GetSurface();
maskTransform = mask.GetTransform();
}
if (!IsHidden() && !clipExtents.IsEmpty()) {
mContentClient->DrawTo(this, aContext->GetDrawTarget(), opacity,
GetOperator(),
maskSurface, &maskTransform);
}
for (uint32_t i = 0; i < readbackUpdates.Length(); ++i) {
ReadbackProcessor::Update& update = readbackUpdates[i];
nsIntPoint offset = update.mLayer->GetBackgroundLayerOffset();
nsRefPtr<gfxContext> ctx =
update.mLayer->GetSink()->BeginUpdate(update.mUpdateRect + offset,
update.mSequenceCounter);
if (ctx) {
NS_ASSERTION(opacity == 1.0, "Should only read back opaque layers");
ctx->Translate(gfxPoint(offset.x, offset.y));
mContentClient->DrawTo(this, ctx->GetDrawTarget(), 1.0,
CompositionOpForOp(ctx->CurrentOperator()),
maskSurface, &maskTransform);
update.mLayer->GetSink()->EndUpdate(ctx, update.mUpdateRect + offset);
}
}
}
void
ThebesLayerD3D10::Validate(ReadbackProcessor *aReadback)
{
if (mVisibleRegion.IsEmpty()) {
return;
}
nsIntRect newTextureRect = mVisibleRegion.GetBounds();
SurfaceMode mode = GetSurfaceMode();
if (mode == SURFACE_COMPONENT_ALPHA &&
(!mParent || !mParent->SupportsComponentAlphaChildren())) {
mode = SURFACE_SINGLE_CHANNEL_ALPHA;
}
// If we have a transform that requires resampling of our texture, then
// we need to make sure we don't sample pixels that haven't been drawn.
// We clamp sample coordinates to the texture rect, but when the visible region
// doesn't fill the entire texture rect we need to make sure we draw all the
// pixels in the texture rect anyway in case they get sampled.
nsIntRegion neededRegion = mVisibleRegion;
if (!neededRegion.GetBounds().IsEqualInterior(newTextureRect) ||
neededRegion.GetNumRects() > 1) {
gfxMatrix transform2d;
if (!GetEffectiveTransform().Is2D(&transform2d) ||
transform2d.HasNonIntegerTranslation()) {
neededRegion = newTextureRect;
if (mode == SURFACE_OPAQUE) {
// We're going to paint outside the visible region, but layout hasn't
// promised that it will paint opaquely there, so we'll have to
// treat this layer as transparent.
mode = SURFACE_SINGLE_CHANNEL_ALPHA;
}
}
}
mCurrentSurfaceMode = mode;
VerifyContentType(mode);
nsTArray<ReadbackProcessor::Update> readbackUpdates;
nsIntRegion readbackRegion;
if (aReadback && UsedForReadback()) {
aReadback->GetThebesLayerUpdates(this, &readbackUpdates, &readbackRegion);
}
if (mTexture) {
if (!mTextureRect.IsEqualInterior(newTextureRect)) {
nsRefPtr<ID3D10Texture2D> oldTexture = mTexture;
mTexture = nullptr;
nsRefPtr<ID3D10Texture2D> oldTextureOnWhite = mTextureOnWhite;
mTextureOnWhite = nullptr;
nsIntRegion retainRegion = mTextureRect;
// Old visible region will become the region that is covered by both the
// old and the new visible region.
retainRegion.And(retainRegion, mVisibleRegion);
// No point in retaining parts which were not valid.
retainRegion.And(retainRegion, mValidRegion);
CreateNewTextures(gfxIntSize(newTextureRect.width, newTextureRect.height), mode);
nsIntRect largeRect = retainRegion.GetLargestRectangle();
// If we had no hardware texture before, or have no retained area larger than
// the retention threshold, we're not retaining and are done here.
// If our texture creation failed this can mean a device reset is pending
// and we should silently ignore the failure. In the future when device
// failures are properly handled we should test for the type of failure
// and gracefully handle different failures. See bug 569081.
if (!oldTexture || !mTexture ||
largeRect.width * largeRect.height < RETENTION_THRESHOLD) {
mValidRegion.SetEmpty();
} else {
CopyRegion(oldTexture, mTextureRect.TopLeft(),
mTexture, newTextureRect.TopLeft(),
retainRegion, &mValidRegion);
if (oldTextureOnWhite) {
CopyRegion(oldTextureOnWhite, mTextureRect.TopLeft(),
mTextureOnWhite, newTextureRect.TopLeft(),
retainRegion, &mValidRegion);
}
}
}
}
mTextureRect = newTextureRect;
if (!mTexture || (mode == SURFACE_COMPONENT_ALPHA && !mTextureOnWhite)) {
CreateNewTextures(gfxIntSize(newTextureRect.width, newTextureRect.height), mode);
mValidRegion.SetEmpty();
}
nsIntRegion drawRegion;
drawRegion.Sub(neededRegion, mValidRegion);
if (!drawRegion.IsEmpty()) {
LayerManagerD3D10::CallbackInfo cbInfo = mD3DManager->GetCallbackInfo();
if (!cbInfo.Callback) {
NS_ERROR("D3D10 should never need to update ThebesLayers in an empty transaction");
return;
}
DrawRegion(drawRegion, mode);
if (readbackUpdates.Length() > 0) {
CD3D10_TEXTURE2D_DESC desc(DXGI_FORMAT_B8G8R8A8_UNORM,
newTextureRect.width, newTextureRect.height,
1, 1, 0, D3D10_USAGE_STAGING,
D3D10_CPU_ACCESS_READ);
nsRefPtr<ID3D10Texture2D> readbackTexture;
HRESULT hr = device()->CreateTexture2D(&desc, NULL, getter_AddRefs(readbackTexture));
if (FAILED(hr)) {
LayerManagerD3D10::ReportFailure(NS_LITERAL_CSTRING("ThebesLayerD3D10::Validate(): Failed to create texture"),
hr);
return;
}
device()->CopyResource(readbackTexture, mTexture);
for (uint32_t i = 0; i < readbackUpdates.Length(); i++) {
mD3DManager->readbackManager()->PostTask(readbackTexture,
&readbackUpdates[i],
gfxPoint(newTextureRect.x, newTextureRect.y));
}
}
mValidRegion = neededRegion;
}
}