C++ (Cpp) adm5120_add_device_switch Beispiele

Beispiel #1

Datei: easy83000.c Projekt: Cribstone/linino

static void __init easy83000_setup(void)
{
	easy_setup_pqfp();
	adm5120_add_device_switch(6, NULL);

	/* TODO: add VINAX device */
}

Beispiel #2

Datei: cellvision.c Projekt: pzhaoyang/OpenWRT

void __init cas6xx_setup(void)
{
	cas6xx_flash_setup();
	adm5120_add_device_uart(0);
	adm5120_add_device_uart(1);
	adm5120_add_device_switch(1, NULL);
}

Beispiel #3

Datei: eb-214a.c Projekt: ETegro/OpenSAN

static void __init eb214a_setup(void)
{
#ifdef CONFIG_MTD_PARTITIONS
	adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
	adm5120_flash0_data.parts = eb214a_partitions;
#endif /* CONFIG_MTD_PARTITIONS */
	adm5120_add_device_flash(0);

	adm5120_add_device_gpio(EB214A_GPIO_DEV_MASK);

	adm5120_add_device_uart(0);
	/* adm5120_add_device_uart(1); */

	adm5120_add_device_switch(5, eb214a_vlans);

	eb214a_mac_setup();

	adm5120_add_device_gpio_buttons(ARRAY_SIZE(eb214a_gpio_buttons),
					eb214a_gpio_buttons);

	adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds),
					eb214a_gpio_leds);

	adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
					eb214a_pci_irqs);
	/* adm5120_add_device_usb(); */
}

Beispiel #4

Datei: cellvision.c Projekt: pzhaoyang/OpenWRT

void __init cas7xx_setup(void)
{
	cas7xx_flash_setup();
	cellvision_mac_setup();
	adm5120_add_device_uart(0);
	adm5120_add_device_uart(1);
	adm5120_add_device_switch(1, NULL);
}

Beispiel #5

Datei: rb-192.c Projekt: 7LK/McWRT

static void __init rb192_setup(void)
{
	rb1xx_generic_setup();
	rb1xx_add_device_nand();

	adm5120_add_device_gpio(0);
	adm5120_add_device_switch(6, rb192_vlans);
}

Beispiel #6

Datei: setup.c Projekt: pzhaoyang/OpenWRT

static void __init adm5120_generic_board_setup(void)
{
	adm5120_add_device_uart(0);
	adm5120_add_device_uart(1);

	adm5120_add_device_flash(0);
	adm5120_add_device_switch(6, NULL);
}

Beispiel #7

Datei: rb-150.c Projekt: pzhaoyang/OpenWRT

static void __init rb150_setup(void)
{
	rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON;
	rb1xx_generic_setup();
	rb150_add_device_nand();

	adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds),
					rb150_gpio_leds);
	adm5120_add_device_switch(5, rb150_vlans);
}

Beispiel #8

Datei: rb-153.c Projekt: pzhaoyang/OpenWRT

static void __init rb153_setup(void)
{
	rb1xx_generic_setup();
	rb1xx_add_device_nand();
	rb153_add_device_cf();

	adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds),
					rb153_gpio_leds);
	adm5120_add_device_switch(5, rb153_vlans);
}

Beispiel #9

Datei: easy5120-rt.c Projekt: pzhaoyang/OpenWRT

static void __init easy5120_rt_setup(void)
{
	easy_setup_bga();

	adm5120_add_device_switch(5, easy5120_rt_vlans);
	adm5120_add_device_usb();
	adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds),
					easy5120_rt_gpio_leds);
	adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs),
				easy5120_rt_pci_irqs);
}

Beispiel #10

Datei: np28g.c Projekt: flyzjhz/SDK.UBNT.v5.3.3

static void __init np28g_setup(void)
{
    compex_generic_setup();

    /* setup reset line */
    gpio_request(ADM5120_GPIO_PIN4, NULL);
    gpio_direction_output(ADM5120_GPIO_PIN4, 1);
    adm5120_board_reset = np28g_reset;

    adm5120_add_device_switch(4, np28g_vlans);
    adm5120_add_device_usb();

    adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds),
                                 np28g_gpio_leds);

    adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs);
}

Beispiel #11

Datei: wp54.c Projekt: Cribstone/linino

static void __init wp54_setup(void)
{
	compex_generic_setup();

	/* setup reset line */
	gpio_request(ADM5120_GPIO_PIN3, NULL);
	gpio_direction_output(ADM5120_GPIO_PIN3, 1);
	adm5120_board_reset = wp54_reset;

	adm5120_add_device_switch(2, wp54_vlans);
	adm5120_add_device_gpio_buttons(ARRAY_SIZE(wp54_gpio_buttons),
					wp54_gpio_buttons);
	adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
					wp54_gpio_leds);

	adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
}

Beispiel #12

Datei: br-61xx.c Projekt: wjrsonic/openwrt

void __init br61xx_generic_setup(void)
{

    adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
    adm5120_flash0_data.parts = br61xx_partitions;
    adm5120_add_device_flash(0);

    adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK);

    adm5120_add_device_uart(0);
    adm5120_add_device_uart(1);

    adm5120_add_device_switch(5, br61xx_vlans);

    adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
                                  ARRAY_SIZE(br61xx_gpio_buttons),
                                  br61xx_gpio_buttons);

    br61xx_mac_setup();
}

Beispiel #13

Datei: pmugw.c Projekt: Cribstone/linino

void __init pmugw_setup(void)
{
	/* setup flash A20 line */
	gpio_request(ADM5120_GPIO_PIN5, NULL);
	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
	adm5120_flash0_data.switch_bank = switch_bank_gpio5;

#ifdef CONFIG_MTD_PARTITIONS
	adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
	adm5120_flash0_data.parts = pmugw_partitions;
#endif /* CONFIG_MTD_PARTITIONS */

	adm5120_add_device_uart(1); /* ttyS0 */
	adm5120_add_device_uart(0); /* ttyS1 */

	adm5120_add_device_flash(0);

	pmugw_setup_mac();
	adm5120_add_device_switch(5, pmugw_vlans);
}

Beispiel #14

Datei: easy5120p-ata.c Projekt: whble/trunk

static void __init easy5120pata_setup(void)
{
	easy_setup_pqfp();

	adm5120_add_device_switch(6, NULL);
}