Beispiel #1
0
  int main (int argc, char ** argv) {
    char * usb_device;
    int ret = 0;

    int idx = 1;
    for (idx = 1; idx < argc; idx ++) {
      usb_device = argv [idx];
      ret = usb_reset (usb_device);
    }
    return (ret);


    if (argc == 2) {
      usb_device = argv [1];
      ret = usb_reset (usb_device);
      return (ret);
    }
/*
    if (argc != 2) {
      loge ("Usage: usb_reset usb_device\n");
      return (-1);
    }
*/
/*
    logd ("sleep (0): %d\n", sleep (0));
    logd ("sleep (1): %d\n", sleep (1));
    logd ("sleep (2): %d\n", sleep (2));
return (0);
*/

    if (argc == 3) {
      while (1) {
        usleep (10000L);
        printf (".\b");
      }
      return (ret);
    }
/*
    pthread_t busy_thr;
    if (pthread_create (& busy_thr, NULL, busy_thread, NULL) != 0) {
      loge ("pthread_create failed");
      return (-1);
    }
//*/
    logd ("1");
    sleep (1);
    logd ("2");
    sleep (1);
    logd ("3");
    sleep (1);

    unsigned long this_ms = 0;
    unsigned long sleep_val = 1L;
    unsigned long last_ms = ms_get ();
    //for (sleep_val = 1L; sleep_val <= 10000L; sleep_val *= 2L) {
    for (sleep_val = 64L; sleep_val <= 10000L; sleep_val += 64L) {
      //%3.3d (%32.32s)  errno, strerror (errno)
      ms_sleep (sleep_val);
      this_ms = ms_get ();
      logd ("Done ms_sleep (%6.6ld)  ms: %16ld\n", sleep_val, this_ms - last_ms);
      last_ms = this_ms;
    }

    return (0);
 }
Beispiel #2
0
int proc_rule(struct htx_data *ps, struct ruleinfo *pr, char *wbuf, char *rbuf, unsigned int *last_lba, unsigned int *pblk_size)
{
  int            blkno[3], blkno_save[3]; /* block # ptrs 0-curr,1-up,2-dwn */
  int            rc, i, rc_ptr, save_dlen, loop;
  unsigned short seed[3];
  char           path[100], msg[221], *tbuf, *tbuf_malloc;

  int read_res = -1;

  tbuf_malloc = malloc(TMP_BUF_SIZE + PAGE_SIZE);
  if(tbuf_malloc == NULL) { /* Out of memory? */
     sprintf(msg, "Cannot allocate memory for tbuf: %d bytes\n", TMP_BUF_SIZE + PAGE_SIZE);
     hxfmsg(ps, 0, SYSERR, msg);
     return(1);
  }

#ifndef __HTX_LINUX__     /* AIX */
  tbuf = tbuf_malloc;
#else                     /* Linux */
  /* Page align the tmp buffer for linux raw IO */
  tbuf = (char *)HTX_PAGE_ALIGN(tbuf_malloc);
#endif

  init_seed(seed);                /* init seed for random number generator */
  if ( strcmp(pr->addr_type, "SEQ") == 0 ||         /* init length of data */
       strcmp(pr->type_length, "FIXED") == 0)       /* to be transmitted   */
     pr->dlen = pr->num_blks * pr->bytpsec;
  else
     pr->dlen = random_dlen(pr->bytpsec, pr->tot_blks, seed);
  if ( strcmp(pr->oper, "RC") == 0 ) {      /* init write buff for oper RC */
                                   /* get HTXPATTERNS environment variable */
     strcpy(path, ""); /* Linux will need this initialization */
     if ((char *) getenv("HTXPATTERNS") != NULL) {
                 strcpy(path, (char *) getenv("HTXPATTERNS"));
     } else {
         strcpy(path, "../pattern/");                       /* default ONLY */
     }
     strcat (path, pr->pattern_id);
     rc = hxfpat(path, wbuf, pr->dlen);
     if ( rc == 1 ) {
        sprintf(msg, "Cannot open pattern file - %s\n", path);
        hxfmsg(ps, 0, SYSERR, msg);
        return(1);
     }
     if ( rc == 2 ) {
        sprintf(msg, "Cannot read pattern file - %s\n", path);
        hxfmsg(ps, 0, SYSERR, msg);
        return(1);
     }
  }
  if ( strcmp(pr->addr_type, "SEQ") == 0 )    /* init current block number */
     init_blkno(pr, blkno);
  else
     random_blkno(blkno, pr->dlen, pr->bytpsec, pr->max_blkno, seed,
                  pr->min_blkno);
  for ( i = 0; i < 3; i++ )
      blkno_save[i] = blkno[i];

  for ( loop = 1 ; loop <= pr->num_oper ; loop++ ) {
     if ( strcmp(pr->oper, "MS") == 0 ) {
        ms_get(pr, ps, last_lba, pblk_size);
    } else if ( strcmp(pr->oper, "R") == 0 ) {
        read_cdrom(ps, pr, loop, blkno, rbuf);
    } else if ( strcmp(pr->oper, "RWP") == 0 ) {
        read_write_pattern(ps, pr, loop, blkno, rbuf);
    } else if ( strcmp(pr->oper, "RRC") == 0 ) {
        /*read_cdrom(ps, pr, loop, blkno, wbuf);
        read_cdrom(ps, pr, loop, blkno, rbuf);*/

        if( (read_res = read_cdrom(ps, pr, loop, blkno, wbuf) ) == 0 ) {/* read success */
        	if( (read_res = read_cdrom(ps, pr, loop, blkno, rbuf) ) == 0 ) {/* read success, again */
        		cmpbuf(ps, pr, loop, blkno, wbuf, rbuf); /* safe to compare */
			} else { /* second read fail */
				 sprintf(msg, "read_cdrom() failed in Re-Read sequence of RRC oper\n"
				              "Skipping compare operation\n");
				 prt_msg(ps, pr, loop, blkno, 0, SOFT, msg);
			}
		} else { /* first read fail */
			 sprintf(msg, "read_cdrom() failed in Read sequence of RRC oper\n"
						  "Skipping compare operation\n");
			 prt_msg(ps, pr, loop, blkno, 0, SOFT, msg);
		}

    } else if ( strcmp(pr->oper, "RC") == 0 ) {
        for ( i = 0; i < 3; i++ )
           blkno[i] = blkno_save[i];      /* RC = always start at same blkno */
                       /******************************************************/
                       /*- First, read the successive data blocks into rbuf  -*/
                       /******************************************************/
        save_dlen = pr->dlen;
        rc_ptr = 0;                          /*- init read/compare pointer --*/
        pr->dlen = pr->bytpsec;      /*-- read 1 block at a time into rbuf --*/
        while ( rc_ptr <= pr->num_blks ) {
           /*read_cdrom(ps, pr, loop, blkno, tbuf);*/
           if( ( read_res = read_cdrom(ps, pr, loop, blkno, tbuf) ) != 0 ) /* read un-succesfull ?*/
           		break;

           for ( i = 0; i <= pr->dlen; i++ )
               rbuf[(pr->dlen*rc_ptr)+i] = tbuf[i];
           set_blkno(blkno, pr->direction, pr->increment, 1);
           rc_ptr++;
        }
        if( read_res == 0 ) {/* only if all reads are successful ... */
			pr->dlen = save_dlen;
			cmpbuf(ps, pr, loop, blkno_save, wbuf, rbuf);
		} else { /* read fail */
			 sprintf(msg, "read_cdrom() failed in Read sequence of RC oper\n"
						  "Skipping compare operation\n");
			 prt_msg(ps, pr, loop, blkno, 0, SOFT, msg);
		}

    } else if ( strcmp(pr->oper, "D") == 0 ) {
        diag_cdrom(ps, pr, loop, blkno);
    } else if ( strcmp(pr->oper, "A") == 0 ) {
      #ifndef __HTX_LINUX__
        audio_cdrom(ps, pr, loop, blkno);
      #endif
    } else if ( strcmp(pr->oper, "AMM") == 0 ) {
		if ( (0 != strncmp(device_subclass, "sata", 16)) && (0 != strncmp(device_subclass, "usbif", 16)) ) {
			/* PLAYUDIO MSF is not supported for SATA drives */
        	audio_mm(ps, pr, loop, blkno);
		}
		else {
			sprintf(msg, "Skipping AMM stanza for SATA/USB drive, rule_id = %s\n", pr->rule_id);
       		hxfmsg(ps, 0, INFO, msg);
		}
    } else if ( strcmp(pr->oper, "RS") == 0 ) {
        prt_req_sense(ps, pr, loop, blkno);
    } else if ( strcmp(pr->oper, "S") == 0 ) {
        do_sleep(ps, pr, loop, blkno);
    } else if ( strcmp(pr->oper, "XCMD") == 0 ) {
        rc = do_cmd(ps, pr);
    } else {
        ;
    }

    hxfupdate(UPDATE, ps);
    if ( ps->run_type[0] == 'O' ) {
       info_msg(ps, pr, loop, blkno, msg);
       hxfmsg(ps, 0, INFO, msg);
    }
    if ( strcmp(pr->type_length, "RANDOM") == 0 && /* set lgth of data trans */
         strcmp(pr->addr_type, "RANDOM") == 0 )    /* if random is specified */
       pr->dlen = random_dlen(pr->bytpsec, pr->tot_blks, seed);
    if ( strcmp(pr->addr_type, "RANDOM") == 0 ) /* set block # for next oper */
       random_blkno(blkno, pr->dlen, pr->bytpsec, pr->max_blkno, seed,
                    pr->min_blkno);
    else if ( (strcmp(pr->oper, "RC") != 0 ) /* set blkno if not RC or RWP */
		      && ( strcmp(pr->oper, "RWP") != 0 ))
       set_blkno(blkno, pr->direction, pr->increment, pr->num_blks);
    if ( strcmp(pr->addr_type, "SEQ") == 0 ) {
       rc = wrap(pr, blkno);
       if ( rc == 1 )
          init_blkno(pr,blkno);
    }
  }
  free(tbuf_malloc);
  return(0);
}