void QTessellatorPrivate::removeEdges()
{
int cv = currentVertex;
while (cv < vertices.nPoints) {
const Vertex *v = vertices.sorted[cv];
if (v->y > y)
break;
if (v->flags & LineBeforeEnds) {
QDEBUG() << " removing edge" << vertices.prevPos(v);
int pos = scanline.findEdge(vertices.prevPos(v));
if (pos == -1)
continue;
scanline.edges[pos]->mark = true;
if (pos > 0)
scanline.edges[pos - 1]->intersect_right = true;
if (pos < scanline.size - 1)
scanline.edges[pos + 1]->intersect_left = true;
scanline.removeAt(pos);
}
if (v->flags & LineAfterEnds) {
QDEBUG() << " removing edge" << vertices.position(v);
int pos = scanline.findEdge(vertices.position(v));
if (pos == -1)
continue;
scanline.edges[pos]->mark = true;
if (pos > 0)
scanline.edges[pos - 1]->intersect_right = true;
if (pos < scanline.size - 1)
scanline.edges[pos + 1]->intersect_left = true;
scanline.removeAt(pos);
}
++cv;
}
}
static int verify (uint8_t * truth_buf, uint8_t * test_buf,
int64_t sector_num, int nb_sectors)
{
int i;
for (i = 0; i < nb_sectors; i++) {
int64_t offset = i * 512;
if (memcmp (&truth_buf[offset], &test_buf[offset], 512) != 0) {
int j;
printf ("Sector %" PRId64 " differs\n", sector_num + i);
QDEBUG ("Sector %" PRId64 " differs\n", sector_num + i);
for (j = 0; j < 512; j++) {
if (truth_buf[offset + j] == test_buf[offset + j]) {
QDEBUG ("%02d: %02X %02X\n", j, truth_buf[offset + j],
test_buf[offset + j]);
} else {
QDEBUG ("%02d: %02X %02X ***\n", j,
truth_buf[offset + j], test_buf[offset + j]);
}
}
fprintf (stderr, "Pause process %d for debugging...\n", getpid ());
fgetc (stdin);
return -1;
}
}
return 0;
}
/**
* @brief No incoming parameters. Get data from RCHAN. Creating the stream file. If BASS_StreamCreateFile is failure colled BASS_Free().
* @param No params
*/
void Widget::stopRecording()
{
if (BASS_ChannelGetData(rchan, this->fft, BASS_DATA_FFT1024 | BASS_DATA_FFT_COMPLEX) == -1) {
QDEBUG("Cannot get recbuf from rchan");
QDEBUG(BASS_ErrorGetCode());
}
BASS_ChannelStop(rchan);
rchan=0;
ui->pushButton->setText(tr("Record"));
// complete the WAVE header
*(DWORD*)(recbuf+4)=reclen-8;
*(DWORD*)(recbuf+40)=reclen-44;
// enable "save" button
ui->pushButton_3->setEnabled(true);
// setup output device (using default device)
if (!BASS_Init(-1,44100,0,NULL,NULL)) {
QDEBUG(BASS_ErrorGetCode());
QDEBUG("Can't initialize output device");
return;
}
// create a stream from the recording
if (chan=BASS_StreamCreateFile(TRUE,recbuf,0,reclen,BASS_SAMPLE_FLOAT)) {
//ui->pushButton_2->setEnabled(true); // enable "play" button
}
else
BASS_Free();
ui->pushButton->setEnabled(true);
}
void QTessellatorPrivate::addIntersections()
{
if (scanline.size) {
QDEBUG() << "INTERSECTIONS";
// check marked edges for intersections
#ifdef DEBUG
for (int i = 0; i < scanline.size; ++i) {
Edge *e = scanline.edges[i];
QDEBUG() << " " << i << e->edge << "isect=(" << e->intersect_left << e->intersect_right
<< ')';
}
#endif
for (int i = 0; i < scanline.size - 1; ++i) {
Edge *e1 = scanline.edges[i];
Edge *e2 = scanline.edges[i + 1];
// check for intersection
if (e1->intersect_right || e2->intersect_left)
addIntersection(e1, e2);
}
}
#if 0
if (intersections.constBegin().key().y == y) {
QDEBUG() << "----------------> intersection on same line";
scanline.clearMarks();
scanline.processIntersections(y, &intersections);
goto redo;
}
#endif
}
void Widget::on_pushButton_2_clicked()
{
QDEBUG(freq.size() << "freq size");
for (std::int32_t i = 0; i < freq.size(); i++) {
one.push_back(freq[i]);
}
QDEBUG(one.size() << "one size");
}
void QTessellatorPrivate::addEdges()
{
while (currentVertex < vertices.nPoints) {
const Vertex *v = vertices.sorted[currentVertex];
if (v->y > y)
break;
if (v->flags & LineBeforeStarts) {
// add new edge
int start = vertices.prevPos(v);
Edge e(vertices, start);
int pos = scanline.findEdgePosition(e);
QDEBUG() << " adding edge" << start << "at position" << pos;
scanline.insert(pos, e);
if (!mark_clever || !(v->flags & LineAfterEnds)) {
if (pos > 0)
scanline.edges[pos - 1]->mark = true;
if (pos < scanline.size - 1)
scanline.edges[pos + 1]->mark = true;
}
}
if (v->flags & LineAfterStarts) {
Edge e(vertices, vertices.position(v));
int pos = scanline.findEdgePosition(e);
QDEBUG() << " adding edge" << vertices.position(v) << "at position" << pos;
scanline.insert(pos, e);
if (!mark_clever || !(v->flags & LineBeforeEnds)) {
if (pos > 0)
scanline.edges[pos - 1]->mark = true;
if (pos < scanline.size - 1)
scanline.edges[pos + 1]->mark = true;
}
}
if (v->flags & LineAfterHorizontal) {
int pos1 = scanline.findEdgePosition(v->x, v->y);
const Vertex *next = vertices.next(v);
Q_ASSERT(v->y == next->y);
int pos2 = scanline.findEdgePosition(next->x, next->y);
if (pos2 < pos1)
qSwap(pos1, pos2);
if (pos1 > 0)
--pos1;
if (pos2 == scanline.size)
--pos2;
//QDEBUG() << "marking horizontal edge from " << pos1 << "to" << pos2;
scanline.markEdges(pos1, pos2);
}
++currentVertex;
}
}
Logbook::~Logbook() {
QDEBUG("Logbook::~Logbook()");
deleteExpiredHistories();
m_query.clear();
m_db.close();
if ( m_dbHelper ) delete m_dbHelper;
}
void PersistentConnection::statusReceiver(QString message)
{
QDEBUGVAR(message);
ui->topLabel->setText(message);
if(message.startsWith("Connected")) {
wasConnected = true;
}
if(message.toLower().startsWith("not connected")) {
QDEBUG() << "Setting style sheet";
ui->trafficViewEdit->setStyleSheet("QTextEdit { background-color: #EEEEEE }");
ui->asciiSendButton->setEnabled(false);
ui->asciiLineEdit->setEnabled(false);
ui->packetComboBox->setEnabled(false);
ui->appendCRcheck->setEnabled(false);
ui->searchEdit->setEnabled(false);
ui->packetComboBox->setEnabled(false);
ui->LoadButton->setEnabled(false);
stopTimer = true;
}
}
void Widget::on_pushButton_7_clicked()
{
for (std::int32_t i = 0; i < freq.size(); i++) {
four.push_back(freq[i]);
}
QDEBUG(two.size() << "two size");
}
/**
* @brief Starts the record and set default confuration for audio file. If start record is failure free RECBUF is comming.
*/
void Widget::startRecording() {
WAVEFORMATEX *wf;
if (recbuf) { // free old recording;
BASS_StreamFree(chan);
chan=0;
free(recbuf);
recbuf=NULL;
//ui->pushButton_2->setEnabled(false);
ui->pushButton_3->setEnabled(false);
// close output device before recording incase of half-duplex device;
BASS_Free();
}
// allocate initial buffer and make space for WAVE header;
recbuf=(char*)malloc(BUFSTEP);
reclen=44;
// fill the WAVE header;
memcpy(recbuf,"RIFF\0\0\0\0WAVEfmt \20\0\0\0",20);
memcpy(recbuf+36,"data\0\0\0\0",8);
wf=(WAVEFORMATEX*)(recbuf+20);
wf->wFormatTag=1;
wf->nChannels=2;
wf->wBitsPerSample=16;
wf->nSamplesPerSec=44100;
wf->nBlockAlign=wf->nChannels*wf->wBitsPerSample/8;
wf->nAvgBytesPerSec=wf->nSamplesPerSec*wf->nBlockAlign;
// start recording @ 44100hz 32-bit stereo;
if (!(rchan=BASS_RecordStart(44100,2,0,&RecordingCallback,0))) {
QDEBUG(BASS_ErrorGetCode());
Error("Couldn't start recording");
free(recbuf);
recbuf=0;
return;
}
ui->pushButton->setEnabled(false);
}
void PersistentConnection::on_buttonBox_rejected()
{
QDEBUG() << "Stopping timer";
refreshTimer.stop();
}
void GameLogger::networkError(QString errorStr)
{
QDEBUG("[GameLogger::networkError()] called with error %s", qPrintable(errorStr));
// Propagate error to UI
emit error(errorStr);
}
bool QTessellatorPrivate::Edge::intersect(const Edge &other, Q27Dot5 *y, bool *det_positive) const
{
qint64 a1 = v1->y - v0->y;
qint64 b1 = v0->x - v1->x;
qint64 a2 = other.v1->y - other.v0->y;
qint64 b2 = other.v0->x - other.v1->x;
qint64 det = a1 * b2 - a2 * b1;
if (det == 0)
return false;
qint64 c1 = qint64(v1->x) * v0->y - qint64(v0->x) * v1->y;
qint64 r3 = a1 * other.v0->x + b1 * other.v0->y + c1;
qint64 r4 = a1 * other.v1->x + b1 * other.v1->y + c1;
// Check signs of r3 and r4. If both point 3 and point 4 lie on
// same side of line 1, the line segments do not intersect.
QDEBUG() << " " << r3 << r4;
if (r3 != 0 && r4 != 0 && sameSign( r3, r4 ))
return false;
qint64 c2 = qint64(other.v1->x) * other.v0->y - qint64(other.v0->x) * other.v1->y;
qint64 r1 = a2 * v0->x + b2 * v0->y + c2;
qint64 r2 = a2 * v1->x + b2 * v1->y + c2;
// Check signs of r1 and r2. If both point 1 and point 2 lie
// on same side of second line segment, the line segments do not intersect.
QDEBUG() << " " << r1 << r2;
if (r1 != 0 && r2 != 0 && sameSign( r1, r2 ))
return false;
// The det/2 is to get rounding instead of truncating. It
// is added or subtracted to the numerator, depending upon the
// sign of the numerator.
qint64 offset = det < 0 ? -det : det;
offset >>= 1;
qint64 num = a2 * c1 - a1 * c2;
*y = ( num < 0 ? num - offset : num + offset ) / det;
*det_positive = (det > 0);
return true;
}
void Logbook::deleteBookmarks() {
QDEBUG("Logbook::deleteBookmarks()");
if ( !m_query.exec(DELETE_BOOKMARK_ALL_SQL) ) {
QWARNING_EXP("Logbook::deleteBookmarks()", "Query exec error: " << m_query.lastError().text());
} else {
emit bookmarksChanged();
}
}
void Logbook::deleteHistories() {
QDEBUG("Logbook::deleteHistories()");
if ( !m_query.exec(DELETE_HISTORY_ALL_SQL) ) {
QWARNING_EXP("Logbook::deleteHistories()", "Query exec error: " << m_query.lastError().text());
} else {
emit historiesChanged();
}
}
void MainWindow::onLogoutCompleted()
{
if(isShuttingDown)
{
QDEBUG("MainWindow::onLogoutCompleted() - shutting down, forcing quit");
forceQuit();
}
}
void SendPacketButton::sendClicked()
{
QDEBUG() << " Emit clicked: " << name;
emit sendPacket(name);
}
foreach(loopPkt, trafficList) {
QDEBUG() << "Packet Loop:" << count++ << loopPkt.asciiString();
if(loopPkt.fromIP.toLower() == "you") {
out << "<p style='color:blue'>";
} else {
out << "<p>";
}
out << loopPkt.asciiString().toHtmlEscaped();
out << "</p>";
}
void Logbook::deleteExpiredHistories() {
QDEBUG("Logbook::deleteExpiredHistories()");
m_query.prepare(DELETE_EXPIRED_HISTORY_SQL);
m_query.addBindValue( QString("-%1 days").arg( m_settings.value(SETTINGS_KEY_HISTORY_LENGTH_DAYS).toString() ) );
if ( !m_query.exec() ) {
QWARNING_EXP("Logbook::deleteExpiredHistories()", "Query exec error: " << m_query.lastError().text());
} else {
QDEBUG_EXP("Logbook::deleteExpiredHistories()", "Expired Histories deleted: " << m_query.numRowsAffected());
}
}
void GameLogger::querySettings() {
QDEBUG("[GameLogger::querySettings()] called");
networkHandler->querySettings();
waitedForSettings = 0;
// The first timeout in timer was to get the settings
disconnect(updateTimer, SIGNAL(timeout()), this, SLOT(querySettings()));
updateTimer->setInterval(1000-QTime::currentTime().msec()); // Baseline 1 second interval/resolution
metronome.start();
connect(updateTimer, SIGNAL(timeout()), this, SLOT(update()));
}
void PersistentConnection::init() {
QDEBUG();
setWindowTitle("TCP://"+sendPacket.toIP + ":" + QString::number(sendPacket.port));
QDEBUG();
thread = new TCPThread(sendPacket, this);
QDEBUG() << ": thread Connection attempt " <<
connect ( this , SIGNAL ( persistentPacketSend(Packet) ) , thread, SLOT ( sendPersistant(Packet) ) )
<< connect ( this , SIGNAL ( closeConnection() ) , thread, SLOT ( closeConnection() ) )
<< connect ( thread , SIGNAL ( connectStatus(QString) ) , this, SLOT ( statusReceiver(QString) ) )
<< connect ( thread , SIGNAL ( packetSent(Packet)), this, SLOT(packetSentSlot(Packet)));
QApplication::processEvents();
thread->start();
QApplication::processEvents();
}
void DraggableLabel::dragPixmap()
{
const QPixmap *currentPixmap = pixmap();
if (currentPixmap == NULL)
return;
// Make temp file
QTemporaryFile *tempFile = new QTemporaryFile(AppTools::addPathSeparator(QDir::tempPath()) + DRAG_LABEL_FILENAME_TEMPLATE);
tempFile->setAutoRemove(false);
if (!tempFile->open())
{
delete tempFile;
return;
}
// Arrange data
QMimeData *data = new QMimeData;
data->setImageData(currentPixmap->toImage());
// Save pixmap
QString tempFileName = tempFile->fileName();
currentPixmap->save(tempFileName);
delete tempFile;
QDEBUG("Dragged file saved to " << tempFileName);
// Keep its name
QList <QUrl> urls;
urls.append(QUrl::fromLocalFile(tempFileName));
data->setUrls(urls);
QPixmap preview = currentPixmap->scaled(DRAG_LABEL_PREVIEW_WIDTH, DRAG_LABEL_PREVIEW_HEIGHT, Qt::KeepAspectRatio);
QPixmap preview2(preview.width(), preview.height());
preview2.fill(QColor(180, 180, 180));
preview.setAlphaChannel(preview2);
// Go drag
QDrag *drag = new QDrag(this);
drag->setPixmap(preview);
drag->setMimeData(data);
drag->setHotSpot(QPoint(preview.width() / 2, preview.height() / 2));
// Let's go!
drag->exec(Qt::MoveAction);
}
PersistentConnection::PersistentConnection(QWidget *parent) :
QDialog(parent),
ui(new Ui::PersistentConnection)
{
ui->setupUi(this);
setWindowFlags(this->windowFlags() & ~Qt::WindowContextHelpButtonHint);
suppressSlot = true;
QDEBUG();
sendPacket.clear();
QDEBUG() << ": refreshTimer Connection attempt " <<
connect ( &refreshTimer , SIGNAL ( timeout() ) , this, SLOT ( refreshTimerTimeout ( ) ) )
<< connect ( this , SIGNAL ( rejected() ) , this, SLOT ( aboutToClose ( ) ) )
<< connect ( this , SIGNAL ( accepted() ) , this, SLOT ( aboutToClose ( ) ) )
<< connect ( this , SIGNAL ( dialogIsClosing() ) , this, SLOT ( aboutToClose ( ) ) );
QDEBUG() << "Setup timer";
refreshTimer.setInterval(200);
refreshTimer.start();
trafficList.clear();
startTime = QDateTime::currentDateTime();
wasConnected = false;
stopTimer = false;
ui->searchEdit->setText("");
loadComboBox();
useraw = true;
ui->asciiLineEdit->setFocus();
suppressSlot = false;
}
FtuFirstTimeUse::FtuFirstTimeUse(QObject* aParent) :
QObject(aParent),
mRuntime(NULL)
{
QDEBUG("FTU::FtuFirstTimeUse::FtuFirstTimeUse");
registerServicePlugins();
QServiceManager manager;
QServiceFilter filter(ftuRuntimeUri);
QList<QServiceInterfaceDescriptor> interfaces = manager.findInterfaces(
filter);
QDEBUG("ftu: found " << interfaces.count()
<< " instances of runtime";)
if(interfaces.count() > 0){
void AuthorizationRequest::onGetAuthorizationResponseResult(QVariant state, Fault fault, AuthorizationResultCode::AuthorizationResultCodeEnum result)
{
Q_UNUSED(state)
QDEBUG("AuthorizationReseponse result come");
if (fault.isNull() && (result == AuthorizationResultCode::Ok || AuthorizationResultCode::AlreadyAuthorized) )
{
if (INFOMANAGER->isUserOnline())
{
if (approve)
INFOMANAGER->authorizeContact(contactId);
else
INFOMANAGER->removeFromContactList(contactId);
}
}
if (active)
emit authorizationResponseCompleted(fault, result, approve);
deleteLater();
}
void MainWindow::shutDown()
{
bool isOnline = INFOMANAGER->isUserOnline();
if (isShuttingDown || !logout(true))
return;
if (isOnline)
{
// wait a little for logoutCompleted
QTimer::singleShot(2000, this, SLOT(forceQuit()));
}
else
{
QDEBUG("MainWindow::shutDown() - not online, quit immediately");
forceQuit();
}
#ifdef Q_WS_MAC
macCleanup();
#endif
}
/**
* @brief It is a one-parameter family of window functions used for digital signal processing.
*/
void Widget::kaiser_window() {
std::float_t iI0b = 0, h = 0;
std::int32_t k = 0;
std::float_t b = 1.8;
std::float_t L = 0.54;
std::float_t w = 0.0;
try {
k = -512;
//QDEBUG(k << "k");
iI0b = 1.0 / this->I0(b);
//QDEBUG(iI0b << "iI0b");
for (std::int32_t i = 1; i < freq.size() - 1; i++) {
k++;
h = std::abs(this->I0(b*std::sqrt(1 - std::pow(2.0*k/(1023),2)))) * iI0b;
//QDEBUG(h << "h");
this->freq[i] *= h;
//this->freq[256 - 1 - i] *= h;
QDEBUG(freq[i]);
}
for (std::int32_t i = 1; i <freq.size() - 1; i++) {
w = L - (1 - L)*std::cos(2*M_PI*(i+1)/(freq.size()-1));
w /= 4;
freq.at(i) *= w;
}
emit this->plotKaiserWindow();
}
catch (std::exception &ex) {
std::cerr << ex.what();
std::cerr << "Kaiser windwow";
}
}
static uint32_t allocate_chunk (BlockDriverState * bs)
{
BDRVFvdState *s = bs->opaque;
/* Check if there is sufficient storage space. */
if (s->used_storage + s->chunk_size > s->data_storage) {
if (s->add_storage_cmd) {
if (system (s->add_storage_cmd)) {
fprintf (stderr, "Error in executing %s\n", s->add_storage_cmd);
}
} else {
/* If the image is stored on a file system, the image file size
* can be increased by bdrv_truncate. */
int64_t new_size = (s->data_offset + s->used_storage +
s->storage_grow_unit) * 512;
bdrv_truncate (s->fvd_data, new_size);
}
/* Check how much storage is available now. */
int64_t size = bdrv_getlength (s->fvd_data);
if (size < 0) {
fprintf (stderr, "Error in bdrv_getlength(%s)\n", bs->filename);
return EMPTY_TABLE;
}
s->data_storage = size / 512 - s->data_offset;
if (s->used_storage + s->chunk_size > s->data_storage) {
fprintf (stderr, "Could not allocate more storage space.\n");
return EMPTY_TABLE;
}
QDEBUG ("Increased storage to %" PRId64 " bytes.\n", size);
}
uint32_t allocated_chunk_id = s->used_storage / s->chunk_size;
s->used_storage += s->chunk_size;
return allocated_chunk_id;
}
void QTessellatorPrivate::processIntersections()
{
QDEBUG() << "PROCESS INTERSECTIONS";
// process intersections
while (!intersections.isEmpty()) {
Intersections::iterator it = intersections.begin();
if (it.key().y != y)
break;
// swap edges
QDEBUG() << " swapping intersecting edges ";
int min = scanline.size;
int max = 0;
Q27Dot5 xmin = INT_MAX;
Q27Dot5 xmax = INT_MIN;
int num = 0;
while (1) {
const Intersection &i = it.key();
int next = it->next;
int edgePos = scanline.findEdge(i.edge);
if (edgePos >= 0) {
++num;
min = qMin(edgePos, min);
max = qMax(edgePos, max);
Edge *edge = scanline.edges[edgePos];
xmin = qMin(xmin, edge->positionAt(y));
xmax = qMax(xmax, edge->positionAt(y));
}
Intersection key;
key.y = y;
key.edge = next;
it = intersections.find(key);
intersections.remove(i);
if (it == intersections.end())
break;
}
if (num < 2)
continue;
Q_ASSERT(min != max);
QDEBUG() << "sorting between" << min << "and" << max << "xpos=" << xmin << xmax;
while (min > 0 && scanline.edges[min - 1]->positionAt(y) >= xmin) {
QDEBUG() << " adding edge on left";
--min;
}
while (max + 1 < scanline.size && scanline.edges[max + 1]->positionAt(y) <= xmax) {
QDEBUG() << " adding edge on right";
++max;
}
qSort(scanline.edges + min, scanline.edges + max + 1, EdgeSorter(y));
#ifdef DEBUG
for (int i = min; i <= max; ++i)
QDEBUG() << " " << scanline.edges[i]->edge << "at pos" << i;
#endif
for (int i = min; i <= max; ++i) {
Edge *edge = scanline.edges[i];
edge->intersect_left = true;
edge->intersect_right = true;
edge->mark = true;
}
}
}
QRectF QTessellatorPrivate::collectAndSortVertices(const QPointF *points, int *maxActiveEdges)
{
*maxActiveEdges = 0;
Vertex *v = vertices.storage;
Vertex **vv = vertices.sorted;
qreal xmin(points[0].x());
qreal xmax(points[0].x());
qreal ymin(points[0].y());
qreal ymax(points[0].y());
// collect vertex data
Q27Dot5 y_prev = FloatToQ27Dot5(points[vertices.nPoints-1].y());
Q27Dot5 x_next = FloatToQ27Dot5(points[0].x());
Q27Dot5 y_next = FloatToQ27Dot5(points[0].y());
int j = 0;
int i = 0;
while (i < vertices.nPoints) {
Q27Dot5 y_curr = y_next;
*vv = v;
v->x = x_next;
v->y = y_next;
v->flags = 0;
next_point:
xmin = qMin(xmin, points[i+1].x());
xmax = qMax(xmax, points[i+1].x());
ymin = qMin(ymin, points[i+1].y());
ymax = qMax(ymax, points[i+1].y());
y_next = FloatToQ27Dot5(points[i+1].y());
x_next = FloatToQ27Dot5(points[i+1].x());
// skip vertices on top of each other
if (v->x == x_next && v->y == y_next) {
++i;
if (i < vertices.nPoints)
goto next_point;
Vertex *v0 = vertices.storage;
v0->flags &= ~(LineBeforeStarts|LineBeforeEnds|LineBeforeHorizontal);
if (y_prev < y_curr)
v0->flags |= LineBeforeEnds;
else if (y_prev > y_curr)
v0->flags |= LineBeforeStarts;
else
v0->flags |= LineBeforeHorizontal;
if ((v0->flags & (LineBeforeStarts|LineAfterStarts))
&& !(v0->flags & (LineAfterEnds|LineBeforeEnds)))
*maxActiveEdges += 2;
break;
}
if (y_prev < y_curr)
v->flags |= LineBeforeEnds;
else if (y_prev > y_curr)
v->flags |= LineBeforeStarts;
else
v->flags |= LineBeforeHorizontal;
if (y_curr < y_next)
v->flags |= LineAfterStarts;
else if (y_curr > y_next)
v->flags |= LineAfterEnds;
else
v->flags |= LineAfterHorizontal;
// ### could probably get better limit by looping over sorted list and counting down on ending edges
if ((v->flags & (LineBeforeStarts|LineAfterStarts))
&& !(v->flags & (LineAfterEnds|LineBeforeEnds)))
*maxActiveEdges += 2;
y_prev = y_curr;
++v;
++vv;
++j;
++i;
}
vertices.nPoints = j;
QDEBUG() << "maxActiveEdges=" << *maxActiveEdges;
vv = vertices.sorted;
qSort(vv, vv + vertices.nPoints, compareVertex);
return QRectF(xmin, ymin, xmax-xmin, ymax-ymin);
}
