/*
 * Description
 *	Transmit xmitbuf to hardware tx fifo
 *
 * Return
 *	_SUCCESS	ok
 *	_FAIL		something error
 */
s32 rtl8723as_xmit_buf_handler(PADAPTER padapter)
{
	PHAL_DATA_TYPE phal;
	struct mlme_priv *pmlmepriv;
	struct xmit_priv *pxmitpriv;
	struct dvobj_priv	*pdvobjpriv;
	struct xmit_buf *pxmitbuf;
	struct xmit_frame *pframe;
	u8 *freePage;
	u32 deviceId;
	u32 requiredPage;
	u8 PageIdx, queue_empty;
	_irqL irql;
	u32 n;
	s32 ret;


	phal = GET_HAL_DATA(padapter);
	pmlmepriv = &padapter->mlmepriv;
	pxmitpriv = &padapter->xmitpriv;
	pdvobjpriv = adapter_to_dvobj(padapter);
	freePage = phal->SdioTxFIFOFreePage;

	ret = _rtw_down_sema(&pxmitpriv->xmit_sema);
	if (_FAIL == ret) {
		RT_TRACE(_module_hal_xmit_c_, _drv_emerg_,
				 ("%s: down SdioXmitBufSema fail!\n", __FUNCTION__));
		return _FAIL;
	}

	ret = (padapter->bDriverStopped == _TRUE) || (padapter->bSurpriseRemoved == _TRUE);
	if (ret) {
		RT_TRACE(_module_hal_xmit_c_, _drv_err_,
				 ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)!\n",
				  __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved));
		return _FAIL;
	}

#ifdef CONFIG_LPS_LCLK
	ret = rtw_register_tx_alive(padapter);
	if (ret != _SUCCESS) {
		return _SUCCESS;
	}
#endif

	do {
		queue_empty = rtl8723_dequeue_writeport(padapter, freePage);
//	dump secondary adapter xmitbuf 
#ifdef CONFIG_CONCURRENT_MODE
		if(rtw_buddy_adapter_up(padapter))
			queue_empty &= rtl8723_dequeue_writeport(padapter->pbuddy_adapter, freePage);
#endif
	} while ( !queue_empty);
	
#ifdef CONFIG_LPS_LCLK
	rtw_unregister_tx_alive(padapter);
#endif

	return _SUCCESS;
}
//todo: static
s32 rtl8188es_dequeue_writeport(PADAPTER padapter, u8 *freePage)
{
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
	struct xmit_buf *pxmitbuf;
	PADAPTER pri_padapter = padapter;
	s32 ret = 0;

#ifdef CONFIG_CONCURRENT_MODE
	if (padapter->adapter_type > 0)
		pri_padapter = padapter->pbuddy_adapter;

	if(rtw_buddy_adapter_up(padapter))
		ret = check_buddy_fwstate( padapter,  _FW_UNDER_SURVEY);
#endif

	ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);

	if (_TRUE == ret)
		pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
	else
		pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);

	if (pxmitbuf == NULL)
		return _TRUE;

query_free_page:
	// check if hardware tx fifo page is enough
	if( _FALSE == rtl8188es_query_tx_freepage(pri_padapter, pxmitbuf))
	{
		rtw_msleep_os(1);
		goto query_free_page;
	}

	if ((padapter->bSurpriseRemoved == _TRUE)
		|| (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
		||((padapter->pbuddy_adapter)
		&& ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
	){
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
			 ("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
		goto free_xmitbuf;
	}

	rtw_write_port(padapter, ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr), pxmitbuf->len, (u8 *)pxmitbuf);

free_xmitbuf:
	//rtw_free_xmitframe(pxmitpriv, pframe);
	//pxmitbuf->priv_data = NULL;
	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);

#ifdef CONFIG_SDIO_TX_TASKLET
	tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
#endif

	return _FAIL;
}
Beispiel #3
0
int recvbuf2recvframe(PADAPTER padapter, void *ptr)
{
	u8 *pbuf;
	u8 pkt_cnt = 0;
	u32 pkt_offset;
	s32 transfer_len;
	u8 *pdata, *pphy_status;
	union recv_frame *precvframe = NULL;
	struct rx_pkt_attrib *pattrib = NULL;
	PHAL_DATA_TYPE pHalData;
	struct recv_priv *precvpriv;
	_queue *pfree_recv_queue;
	_pkt *pskb;


	pHalData = GET_HAL_DATA(padapter);
	precvpriv = &padapter->recvpriv;
	pfree_recv_queue = &precvpriv->free_recv_queue;

#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
	pskb = NULL;
	transfer_len = (s32)((struct recv_buf*)ptr)->transfer_len;
	pbuf = ((struct recv_buf*)ptr)->pbuf;
#else // !CONFIG_USE_USB_BUFFER_ALLOC_RX
	pskb = (_pkt*)ptr;
	transfer_len = (s32)pskb->len;
	pbuf = pskb->data;
#endif // !CONFIG_USE_USB_BUFFER_ALLOC_RX

#ifdef CONFIG_USB_RX_AGGREGATION
	pkt_cnt = GET_RX_STATUS_DESC_USB_AGG_PKTNUM_8723B(pbuf);
#endif

	do {
		precvframe = rtw_alloc_recvframe(pfree_recv_queue);
		if (precvframe == NULL) {
			DBG_8192C("%s: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__);
			goto _exit_recvbuf2recvframe;
		}

		if (transfer_len >1500)
			_rtw_init_listhead(&precvframe->u.hdr.list);
		precvframe->u.hdr.precvbuf = NULL;	//can't access the precvbuf for new arch.
		precvframe->u.hdr.len = 0;

		rtl8723b_query_rx_desc_status(precvframe, pbuf);

		pattrib = &precvframe->u.hdr.attrib;

		if ((padapter->registrypriv.mp_mode == 0)
		   && ((pattrib->crc_err) || (pattrib->icv_err))) {
			DBG_8192C("%s: RX Warning! crc_err=%d icv_err=%d, skip!\n",
				__FUNCTION__, pattrib->crc_err, pattrib->icv_err);

			rtw_free_recvframe(precvframe, pfree_recv_queue);
			goto _exit_recvbuf2recvframe;
		}

		pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;
		if ((pattrib->pkt_len <= 0) || (pkt_offset > transfer_len)) {
			DBG_8192C("%s: RX Error! pkt_len=%d pkt_offset=%d transfer_len=%d\n",
				__FUNCTION__, pattrib->pkt_len, pkt_offset, transfer_len);

			rtw_free_recvframe(precvframe, pfree_recv_queue);
			goto _exit_recvbuf2recvframe;
		}

		pdata = pbuf + RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz;
		if (rtw_os_alloc_recvframe(padapter, precvframe, pdata, pskb) == _FAIL) {
			DBG_8192C("%s: RX Error! rtw_os_alloc_recvframe FAIL!\n", __FUNCTION__);

			rtw_free_recvframe(precvframe, pfree_recv_queue);
			goto _exit_recvbuf2recvframe;
		}

		recvframe_put(precvframe, pattrib->pkt_len);

		if (pattrib->pkt_rpt_type == NORMAL_RX) {
			if (pattrib->physt)
				pphy_status = pbuf + RXDESC_OFFSET;
			else
				pphy_status = NULL;

#ifdef CONFIG_CONCURRENT_MODE
			if (rtw_buddy_adapter_up(padapter)) {
				if (pre_recv_entry(precvframe, pphy_status) != _SUCCESS) {
					// Return fail except data frame
					//DBG_8192C("%s: RX Error! (concurrent)pre_recv_entry FAIL!\n", __FUNCTION__);
				}
			}
#endif // CONFIG_CONCURRENT_MODE

			if (pphy_status)
				rx_query_phy_status(precvframe, pphy_status);

			if (rtw_recv_entry(precvframe) != _SUCCESS) {
				// Return fail except data frame
				//DBG_8192C("%s: RX Error! rtw_recv_entry FAIL!\n", __FUNCTION__);
			}
		}
		else {
#ifdef CONFIG_C2H_PACKET_EN
			if (pattrib->pkt_rpt_type == C2H_PACKET) {
				rtl8723b_c2h_packet_handler(padapter, precvframe->u.hdr.rx_data, pattrib->pkt_len);
			}
			else {
				DBG_8192C("%s: [WARNNING] RX type(%d) not be handled!\n",
					__FUNCTION__, pattrib->pkt_rpt_type);
			}
#endif // CONFIG_C2H_PACKET_EN
			rtw_free_recvframe(precvframe, pfree_recv_queue);
		}

#ifdef CONFIG_USB_RX_AGGREGATION
		// jaguar 8-byte alignment
		pkt_offset = (u16)_RND8(pkt_offset);
		pkt_cnt--;
		pbuf += pkt_offset;
#endif
		transfer_len -= pkt_offset;
		precvframe = NULL;
	} while (transfer_len > 0);

_exit_recvbuf2recvframe:

	return _SUCCESS;	
}
void rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe)
{
       _irqL irqL;
	int	t, sz, w_sz, pull=0;
	//u8	*mem_addr;
	u32	ff_hwaddr;
	struct xmit_buf		*pxmitbuf = pxmitframe->pxmitbuf;
	struct pkt_attrib		*pattrib = &pxmitframe->attrib;
	struct xmit_priv		*pxmitpriv = &padapter->xmitpriv;
	struct dvobj_priv		*pdvobjpriv = &padapter->dvobjpriv;
	struct security_priv	*psecuritypriv = &padapter->securitypriv;
	struct tx_desc		*ptxdesc;

	if ((pxmitframe->frame_tag == DATA_FRAMETAG) &&
	    (pxmitframe->attrib.ether_type != 0x0806) &&
	    (pxmitframe->attrib.ether_type != 0x888e) &&
	    (pxmitframe->attrib.dhcp_pkt != 1))
	{
		rtw_issue_addbareq_cmd(padapter, pxmitframe);
	}

	//mem_addr = pxmitframe->buf_addr;

       RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_dump_xframe()\n"));
	
	for (t = 0; t < pattrib->nr_frags; t++)
	{
		if (t != (pattrib->nr_frags - 1))
		{
			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("pattrib->nr_frags=%d\n", pattrib->nr_frags));

			sz = pxmitpriv->frag_len;
			sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len);					
		}
		else //no frag
		{
			sz = pattrib->last_txcmdsz;
		}

		ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe);

#ifdef CONFIG_CONCURRENT_MODE
		if(!rtw_buddy_adapter_up(padapter))
				goto skip_if2_tx;
		if(padapter->adapter_type > PRIMARY_ADAPTER)
		{
			_adapter 	  *pri_adapter = padapter->pbuddy_adapter;
			struct dvobj_priv *pri_dvobjpriv = &pri_adapter->dvobjpriv;
		
			_enter_critical(&(pri_dvobjpriv->irq_th_lock), &irqL);


				
			
			ptxdesc = get_txdesc(pri_adapter, ff_hwaddr);
		
			if(ptxdesc == NULL)
			{
				_exit_critical(&pri_dvobjpriv->irq_th_lock, &irqL);
				rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
				DBG_8192C("##### Tx desc unavailable !#####\n");
				break;
			}
			update_txdesc(pxmitframe, (uint*)ptxdesc, sz);

			rtl8192ce_enqueue_xmitbuf(&(pri_adapter->xmitpriv.tx_ring[ff_hwaddr]), pxmitbuf);
			pxmitbuf->len = sz;

			w_sz = sz;

			wmb();
			ptxdesc->txdw0 |= cpu_to_le32(OWN);
			_exit_critical(&pri_dvobjpriv->irq_th_lock, &irqL);

			rtw_write16(pri_adapter, REG_PCIE_CTRL_REG, ffaddr2dma(ff_hwaddr));
			rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf);	

		} else
skip_if2_tx:
#endif
		{
		_enter_critical(&pdvobjpriv->irq_th_lock, &irqL);

			ptxdesc = get_txdesc(pxmitframe->padapter, ff_hwaddr);

		if(ptxdesc == NULL)
		{
			_exit_critical(&pdvobjpriv->irq_th_lock, &irqL);
			rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
			DBG_8192C("##### Tx desc unavailable !#####\n");
			break;
		}

		update_txdesc(pxmitframe, (uint*)ptxdesc, sz);


		rtl8192ce_enqueue_xmitbuf(&pxmitpriv->tx_ring[ff_hwaddr], pxmitbuf);

		pxmitbuf->len = sz;
		w_sz = sz;

		wmb();
		ptxdesc->txdw0 |= cpu_to_le32(OWN);

		_exit_critical(&pdvobjpriv->irq_th_lock, &irqL);
		rtw_write16(padapter, REG_PCIE_CTRL_REG, ffaddr2dma(ff_hwaddr));
		rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf);

		}

		rtw_count_tx_stats(padapter, pxmitframe, sz);

		RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_write_port, w_sz=%d\n", w_sz));
		//DBG_8192C("rtw_write_port, w_sz=%d, sz=%d, txdesc_sz=%d, tid=%d\n", w_sz, sz, w_sz-sz, pattrib->priority);      

		//mem_addr += w_sz;

		//mem_addr = (u8 *)RND4(((SIZE_PTR)(mem_addr)));

	}
	
	rtw_free_xmitframe_ex(pxmitpriv, pxmitframe);
	
}
static void rtl8723as_recv_tasklet(void *priv)
{
	PADAPTER				padapter;
	PHAL_DATA_TYPE			pHalData;
	struct recv_priv		*precvpriv;
	struct recv_buf			*precvbuf;
	union recv_frame		*precvframe;
	struct recv_frame_hdr	*phdr;
	struct rx_pkt_attrib	*pattrib;
	u8			*ptr;
	_pkt		*ppkt;
	u32			pkt_offset;
	_irqL		irql;


	padapter = (PADAPTER)priv;
	pHalData = GET_HAL_DATA(padapter);
	precvpriv = &padapter->recvpriv;

	do {
		precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue);
		if (NULL == precvbuf) break;

		ptr = precvbuf->pdata;

		while (ptr < precvbuf->ptail)
		{
			precvframe = rtw_alloc_recvframe(&precvpriv->free_recv_queue);
			if (precvframe == NULL) {
				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("rtl8723as_recv_tasklet: no enough recv frame!\n"));
				rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

				// The case of can't allocte recvframe should be temporary,
				// schedule again and hope recvframe is available next time.
#ifdef PLATFORM_LINUX
				tasklet_schedule(&precvpriv->recv_tasklet);
#endif
				return;
			}

			phdr = &precvframe->u.hdr;
			pattrib = &phdr->attrib;

			update_recvframe_attrib(precvframe, (struct recv_stat*)ptr);

			// fix Hardware RX data error, drop whole recv_buffer
			if ((!(pHalData->ReceiveConfig & RCR_ACRC32)) && pattrib->crc_err)
			{
				DBG_8192C("%s()-%d: RX Warning! rx CRC ERROR !!\n", __FUNCTION__, __LINE__);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->pkt_len;
#if 0 // reduce check to speed up
			if ((ptr + pkt_offset) > precvbuf->ptail) {
				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_,
						("%s: next pkt len(%p,%d) exceed ptail(%p)!\n",
						__FUNCTION__, ptr, pkt_offset, precvbuf->ptail));
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}
#endif

			if ((pattrib->crc_err) || (pattrib->icv_err))
			{
				DBG_8192C("%s: crc_err=%d icv_err=%d, skip!\n", __FUNCTION__, pattrib->crc_err, pattrib->icv_err);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
			}
			else
			{
				ppkt = skb_clone(precvbuf->pskb, GFP_ATOMIC);
				if (ppkt == NULL)
				{
					RT_TRACE(_module_rtl871x_recv_c_, _drv_crit_, ("rtl8723as_recv_tasklet: no enough memory to allocate SKB!\n"));
					rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
					rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

					// The case of can't allocte skb is serious and may never be recovered,
					// once bDriverStopped is enable, this task should be stopped.
					if (padapter->bDriverStopped == _FALSE) {
#ifdef PLATFORM_LINUX
						tasklet_schedule(&precvpriv->recv_tasklet);
#endif
					}

					return;
				}

				phdr->pkt = ppkt;
				phdr->len = 0;
				phdr->rx_head = precvbuf->phead;
				phdr->rx_data = phdr->rx_tail = precvbuf->pdata;
				phdr->rx_end = precvbuf->pend;
				recvframe_put(precvframe, pkt_offset);
				recvframe_pull(precvframe, RXDESC_SIZE + pattrib->drvinfo_sz);
				if (pHalData->ReceiveConfig & RCR_APPFCS)
					recvframe_pull_tail(precvframe, IEEE80211_FCS_LEN);

				// move to drv info position
				ptr += RXDESC_SIZE;

				// update drv info
				if (pHalData->ReceiveConfig & RCR_APP_BA_SSN) {
//					rtl8723s_update_bassn(padapter, pdrvinfo);
					ptr += 4;
				}

#ifdef CONFIG_CONCURRENT_MODE
				if(rtw_buddy_adapter_up(padapter))
				{
					if(pre_recv_entry(precvframe, precvbuf, (struct phy_stat*)ptr) != _SUCCESS)
					{
						RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
							("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
					}
				}
				else
#endif
				{
					if (pattrib->physt)
						update_recvframe_phyinfo(precvframe, (struct phy_stat*)ptr);

					if (rtw_recv_entry(precvframe) != _SUCCESS)
					{
						RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("rtl8723as_recv_tasklet: rtw_recv_entry(precvframe) != _SUCCESS\n"));
					}
				}
			}

			// Page size of receive package is 128 bytes alignment => DMA agg
			// refer to _InitTransferPageSize()
			pkt_offset = _RND128(pkt_offset);
			precvbuf->pdata += pkt_offset;
			ptr = precvbuf->pdata;
		}

		dev_kfree_skb_any(precvbuf->pskb);
		precvbuf->pskb = NULL;
		rtw_enqueue_recvbuf(precvbuf, &precvpriv->free_recv_buf_queue);
	} while (1);
}
static void rtl8723as_recv_tasklet(void *priv)
{
	PADAPTER			padapter;
	PHAL_DATA_TYPE		pHalData;
	struct recv_priv		*precvpriv;
	struct recv_buf		*precvbuf;
	union recv_frame		*precvframe;
	struct recv_frame_hdr	*phdr;
	struct rx_pkt_attrib	*pattrib;
	_irqL	irql;
	u8		*ptr;
	u32		pkt_len, pkt_offset, skb_len, alloc_sz;
	_pkt		*pkt_copy = NULL;
	u8		shift_sz = 0, rx_report_sz = 0;


	padapter = (PADAPTER)priv;
	pHalData = GET_HAL_DATA(padapter);
	precvpriv = &padapter->recvpriv;

	do {
		precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue);
		if (NULL == precvbuf) break;

		ptr = precvbuf->pdata;

		while (ptr < precvbuf->ptail)
		{
			precvframe = rtw_alloc_recvframe(&precvpriv->free_recv_queue);
			if (precvframe == NULL) {
				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("%s: no enough recv frame!\n",__FUNCTION__));
				rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

				// The case of can't allocte recvframe should be temporary,
				// schedule again and hope recvframe is available next time.
#ifdef PLATFORM_LINUX
				tasklet_schedule(&precvpriv->recv_tasklet);
#endif
				return;
			}

			//rx desc parsing
			update_recvframe_attrib(precvframe, (struct recv_stat*)ptr);

			pattrib = &precvframe->u.hdr.attrib;

			// fix Hardware RX data error, drop whole recv_buffer
			if ((!(pHalData->ReceiveConfig & RCR_ACRC32)) && pattrib->crc_err)
			{
				#if !(MP_DRIVER==1)
				DBG_8192C("%s()-%d: RX Warning! rx CRC ERROR !!\n", __FUNCTION__, __LINE__);
				#endif
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			if (pHalData->ReceiveConfig & RCR_APP_BA_SSN)
				rx_report_sz = RXDESC_SIZE + 4 + pattrib->drvinfo_sz;
			else
				rx_report_sz = RXDESC_SIZE + pattrib->drvinfo_sz;

			pkt_offset = rx_report_sz + pattrib->pkt_len;

			if ((ptr + pkt_offset) > precvbuf->ptail) {
				DBG_8192C("%s()-%d: : next pkt len(%p,%d) exceed ptail(%p)!\n", __FUNCTION__, __LINE__, ptr, pkt_offset, precvbuf->ptail);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			if ((pattrib->crc_err) || (pattrib->icv_err))
			{
				DBG_8192C("%s: crc_err=%d icv_err=%d, skip!\n", __FUNCTION__, pattrib->crc_err, pattrib->icv_err);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
			}
			else
			{
				//	Modified by Albert 20101213
				//	For 8 bytes IP header alignment.
				if (pattrib->qos)	//	Qos data, wireless lan header length is 26
				{
					shift_sz = 6;
				}
				else
				{
					shift_sz = 0;
				}

				skb_len = pattrib->pkt_len;

				// for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet.
				// modify alloc_sz for recvive crc error packet by thomas 2011-06-02
				if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){
					//alloc_sz = 1664;	//1664 is 128 alignment.
					if(skb_len <= 1650)
						alloc_sz = 1664;
					else
						alloc_sz = skb_len + 14;
				}
				else {
					alloc_sz = skb_len;
					//	6 is for IP header 8 bytes alignment in QoS packet case.
					//	8 is for skb->data 4 bytes alignment.
					alloc_sz += 14;
				}

#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) // http://www.mail-archive.com/[email protected]/msg17214.html
				pkt_copy = dev_alloc_skb(alloc_sz);
#else
				pkt_copy = netdev_alloc_skb(padapter->pnetdev, alloc_sz);
#endif
				if(pkt_copy)
				{
					pkt_copy->dev = padapter->pnetdev;
					precvframe->u.hdr.pkt = pkt_copy;
					skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address
					skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz.
					_rtw_memcpy(pkt_copy->data, (ptr + rx_report_sz), skb_len);
					precvframe->u.hdr.rx_head = pkt_copy->head;
					precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data;
					precvframe->u.hdr.rx_end = skb_end_pointer(pkt_copy);
				}
				else
				{
					if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0))
					{
						DBG_8192C("rtl8723as_recv_tasklet: alloc_skb fail , drop frag frame \n");
						rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
						break;
					}

					precvframe->u.hdr.pkt = skb_clone(precvbuf->pskb, GFP_ATOMIC);
					if(precvframe->u.hdr.pkt)
					{
						_pkt	*pkt_clone = precvframe->u.hdr.pkt;

						pkt_clone->data = ptr + rx_report_sz;
						skb_reset_tail_pointer(pkt_clone);
						precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail
							= pkt_clone->data;
						precvframe->u.hdr.rx_end =  pkt_clone->data + skb_len;
					}
					else
					{
						DBG_8192C("rtl8723as_recv_tasklet: skb_clone fail\n");
						rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
						break;
					}
				}

				recvframe_put(precvframe, skb_len);
				//recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE);

				if (pHalData->ReceiveConfig & RCR_APPFCS)
					recvframe_pull_tail(precvframe, IEEE80211_FCS_LEN);

				// move to drv info position
				ptr += RXDESC_SIZE;

				// update drv info
				if (pHalData->ReceiveConfig & RCR_APP_BA_SSN) {
					//rtl8723s_update_bassn(padapter, pdrvinfo);
					ptr += 4;
				}

#ifdef CONFIG_CONCURRENT_MODE
				if(rtw_buddy_adapter_up(padapter))
				{
					if(pre_recv_entry(precvframe, precvbuf, (struct phy_stat*)ptr) != _SUCCESS)
					{
						RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
							("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
					}
				}
				else
#endif
				{
					if (pattrib->physt)
						update_recvframe_phyinfo(precvframe, (struct phy_stat*)ptr);

					if (rtw_recv_entry(precvframe) != _SUCCESS)
					{
						RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("%s: rtw_recv_entry(precvframe) != _SUCCESS\n",__FUNCTION__));
					}
				}
			}

			// Page size of receive package is 128 bytes alignment =>DMA AGG
			// refer to _InitTransferPageSize()
			pkt_offset = _RND128(pkt_offset);
			precvbuf->pdata += pkt_offset;
			ptr = precvbuf->pdata;
			precvframe = NULL;
			pkt_copy = NULL;
		}

		rtw_enqueue_recvbuf(precvbuf, &precvpriv->free_recv_buf_queue);
	} while (1);

}
Beispiel #7
0
/*
 * Description
 *	Transmit xmitbuf to hardware tx fifo
 *
 * Return
 *	_SUCCESS	ok
 *	_FAIL		something error
 */
s32 rtl8188es_xmit_buf_handler(PADAPTER padapter)
{
	struct xmit_priv *pxmitpriv;
	u8	queue_empty, queue_pending;
	s32	ret;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);


	pxmitpriv = &padapter->xmitpriv;

	ret = _rtw_down_sema(&pxmitpriv->xmit_sema);
	if (ret == _FAIL) {
		RT_TRACE(_module_hal_xmit_c_, _drv_emerg_, ("down SdioXmitBufSema fail!\n"));
		return _FAIL;
	}

//#ifdef CONFIG_CONCURRENT_MODE
//	if (padapter->pbuddy_adapter->bup){
//		if ((padapter->pbuddy_adapter->bSurpriseRemoved == _TRUE) || 
//			(padapter->pbuddy_adapter->bDriverStopped == _TRUE))
//			buddy_rm_stop = _TRUE; 
//	}
//#endif
	if ((padapter->bSurpriseRemoved == _TRUE) || 
		(padapter->bDriverStopped == _TRUE) 
//#ifdef CONFIG_CONCURRENT_MODE
//		||(buddy_rm_stop == _TRUE)
//#endif
	) {
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
				 ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)\n",
				  __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved));
		return _FAIL;
	}

	queue_pending = check_pending_xmitbuf(pxmitpriv);

#ifdef CONFIG_CONCURRENT_MODE
	if(rtw_buddy_adapter_up(padapter))
		queue_pending |= check_pending_xmitbuf(&padapter->pbuddy_adapter->xmitpriv);
#endif

	if(queue_pending == _FALSE)
		return _SUCCESS;

#ifdef CONFIG_LPS_LCLK
	ret = rtw_register_tx_alive(padapter);
	if (ret != _SUCCESS) return _SUCCESS;
#endif

	do {
		queue_empty = rtl8188es_dequeue_writeport(padapter);
//	dump secondary adapter xmitbuf 
#ifdef CONFIG_CONCURRENT_MODE
		if(rtw_buddy_adapter_up(padapter))
			queue_empty &= rtl8188es_dequeue_writeport(padapter->pbuddy_adapter);
#endif

	} while ( !queue_empty);

#ifdef CONFIG_LPS_LCLK
	rtw_unregister_tx_alive(padapter);
#endif
	return _SUCCESS;
}
Beispiel #8
0
//todo: static 
s32 rtl8188es_dequeue_writeport(PADAPTER padapter)
{
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
	struct xmit_buf *pxmitbuf;
	PADAPTER pri_padapter = padapter;
	s32 ret = 0;
	u8	PageIdx = 0;
	u32	deviceId;
#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
	u8	bUpdatePageNum = _FALSE;
#else
	u32	polling_num = 0;
#endif

#ifdef CONFIG_CONCURRENT_MODE
	if (padapter->adapter_type > 0)
		pri_padapter = padapter->pbuddy_adapter;

	if(rtw_buddy_adapter_up(padapter))
		ret = check_buddy_fwstate( padapter,  _FW_UNDER_SURVEY);
#endif

	ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);

	if (_TRUE == ret)
		pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
	else
		pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);

	if (pxmitbuf == NULL) {
		return _TRUE;
	}

	deviceId = ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr);

	// translate fifo addr to queue index
	switch (deviceId) {
		case WLAN_TX_HIQ_DEVICE_ID:
				PageIdx = HI_QUEUE_IDX;
				break;

		case WLAN_TX_MIQ_DEVICE_ID:
				PageIdx = MID_QUEUE_IDX;
				break;

		case WLAN_TX_LOQ_DEVICE_ID:
				PageIdx = LOW_QUEUE_IDX;
				break;
	}

query_free_page:
	// check if hardware tx fifo page is enough
	if( _FALSE == rtw_hal_sdio_query_tx_freepage(pri_padapter, PageIdx, pxmitbuf->pg_num))
	{
#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
		if (!bUpdatePageNum) {
			// Total number of page is NOT available, so update current FIFO status
			HalQueryTxBufferStatus8189ESdio(padapter);
			bUpdatePageNum = _TRUE;
			goto query_free_page;
		} else {
			bUpdatePageNum = _FALSE;
			enqueue_pending_xmitbuf_to_head(pxmitpriv, pxmitbuf);
			return _TRUE;
		}
#else //CONFIG_SDIO_TX_ENABLE_AVAL_INT
		polling_num++;
		if ((polling_num % 60) == 0) {//or 80
			//DBG_871X("%s: FIFO starvation!(%d) len=%d agg=%d page=(R)%d(A)%d\n",
			//	__func__, n, pxmitbuf->len, pxmitbuf->agg_num, pframe->pg_num, freePage[PageIdx] + freePage[PUBLIC_QUEUE_IDX]);
			rtw_msleep_os(1);
		}

		// Total number of page is NOT available, so update current FIFO status
		HalQueryTxBufferStatus8189ESdio(padapter);
		goto query_free_page;
#endif //CONFIG_SDIO_TX_ENABLE_AVAL_INT
	}

	if ((padapter->bSurpriseRemoved == _TRUE) 
		|| (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
		||((padapter->pbuddy_adapter) 
		&& ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
	){
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
			 ("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
		goto free_xmitbuf;
	}

	if (rtw_sdio_wait_enough_TxOQT_space(padapter, pxmitbuf->agg_num) == _FALSE) 
	{
		goto free_xmitbuf;
	}

	rtw_write_port(padapter, deviceId, pxmitbuf->len, (u8 *)pxmitbuf);

	rtw_hal_sdio_update_tx_freepage(pri_padapter, PageIdx, pxmitbuf->pg_num);

free_xmitbuf:		
	//rtw_free_xmitframe(pxmitpriv, pframe);
	//pxmitbuf->priv_data = NULL;
	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);

#ifdef CONFIG_SDIO_TX_TASKLET
	tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
#endif

	return _FAIL;
}
static s32 rtl8723_dequeue_writeport(PADAPTER padapter)
{
    struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
    struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
    struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
    struct xmit_buf *pxmitbuf;
    PADAPTER pri_padapter = padapter;
    u32 deviceId;
    u32 requiredPage;
    u8 PageIdx=0;
    u8 *freePage;
    _irqL irql;
    u32 n;
    s32 ret = 0;


#ifdef CONFIG_CONCURRENT_MODE
    if (padapter->adapter_type > 0)
        pri_padapter = padapter->pbuddy_adapter;

    if (rtw_buddy_adapter_up(padapter))
        ret = check_buddy_fwstate(padapter, _FW_UNDER_SURVEY);
#endif

    ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);

    if (_TRUE == ret)
        pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
    else
        pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);

    if (pxmitbuf == NULL)
        return _TRUE;

query_free_page:
    // check if hardware tx fifo page is enough
    if( _FALSE == rtl8723bs_query_tx_freepage(pri_padapter, pxmitbuf))
    {
        rtw_msleep_os(1);
        goto query_free_page;
    }

    if ((padapter->bSurpriseRemoved == _TRUE)
            || (padapter->bDriverStopped == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
            ||((padapter->pbuddy_adapter)
               && ((padapter->pbuddy_adapter->bSurpriseRemoved) ||(padapter->pbuddy_adapter->bDriverStopped)))
#endif
       ) {
        RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
                 ("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
        goto free_xmitbuf;
    }


#ifdef CONFIG_CHECK_LEAVE_LPS
    traffic_check_for_leave_lps(padapter, _TRUE, pxmitbuf->agg_num);
#endif


    rtw_write_port(padapter, ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr), pxmitbuf->len, (u8 *)pxmitbuf);

free_xmitbuf:
    //rtw_free_xmitframe(pxmitpriv, pframe);
    //pxmitbuf->priv_data = NULL;
    rtw_free_xmitbuf(pxmitpriv, pxmitbuf);

#if 0 // improve TX/RX throughput balance
    {
        PSDIO_DATA psdio;
        struct sdio_func *func;
        static u8 i = 0;
        u32 sdio_hisr;
        u8 j;

        psdio = &adapter_to_dvobj(padapter)->intf_data;
        func = psdio->func;

        if (i == 2)
        {
            j = 0;
            while (j < 10)
            {
                sdio_hisr = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HISR);
                sdio_hisr &= GET_HAL_DATA(padapter)->sdio_himr;
                if (sdio_hisr & SDIO_HISR_RX_REQUEST)
                {
                    sdio_claim_host(func);
                    sd_int_hdl(pri_padapter);
                    sdio_release_host(func);
                }
                else
                {
                    break;
                }
                j++;
            }
            i = 0;
        }
        else
        {
            i++;
        }
    }
#endif

#ifdef CONFIG_SDIO_TX_TASKLET
    tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
#endif

    return _FAIL;
}
s32 rtl8723_dequeue_writeport(PADAPTER padapter, u8 *freePage)
{
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
	struct xmit_buf *pxmitbuf;
	//struct xmit_frame *pframe;
	PADAPTER pri_padapter = padapter;
	u32 deviceId;
	u32 requiredPage;
	u8 PageIdx;
	_irqL irql;
	u32 n;
	s32 ret = 0;
	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
#ifdef CONFIG_CONCURRENT_MODE
	s32 buddy_rm_stop = _FAIL;
#endif

#ifdef CONFIG_CONCURRENT_MODE
	if(rtw_buddy_adapter_up(padapter))
		ret = check_buddy_fwstate( padapter,  _FW_UNDER_SURVEY);
#endif

	ret = ret || check_fwstate(pmlmepriv, _FW_UNDER_SURVEY);

	if (_TRUE == ret)
		pxmitbuf = dequeue_pending_xmitbuf_under_survey(pxmitpriv);
	else
		pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);

	if (pxmitbuf == NULL) 
		return _TRUE;

	//pframe = (struct xmit_frame*)pxmitbuf->priv_data;
	//requiredPage = pframe->pg_num;
	requiredPage = pxmitbuf->pg_num;

	//translate queue index to sdio fifo addr
	deviceId = pdvobjpriv->Queue2Pipe[pxmitbuf->ff_hwaddr];

	// translate sdio fifo addr to tx fifo page index
	switch (deviceId)
	{
		case WLAN_TX_HIQ_DEVICE_ID:
				PageIdx = HI_QUEUE_IDX;
				break;

		case WLAN_TX_MIQ_DEVICE_ID:
				PageIdx = MID_QUEUE_IDX;
				break;

		case WLAN_TX_LOQ_DEVICE_ID:
				PageIdx = LOW_QUEUE_IDX;
				break;
	}

	// check if hardware tx fifo page is enough
	n = 0;
//	_enter_critical_bh(&phal->SdioTxFIFOFreePageLock, &irql);
	do {
		if (requiredPage <= freePage[PageIdx]) {
			freePage[PageIdx] -= requiredPage;
			break;
		}
		// The number of page which public page included is available.
		if ((freePage[PageIdx] + freePage[PUBLIC_QUEUE_IDX]) > (requiredPage + 1))
		{
			u8 requiredPublicPage;

			requiredPublicPage = requiredPage - freePage[PageIdx];
			freePage[PageIdx] = 0;
			freePage[PUBLIC_QUEUE_IDX] -= requiredPublicPage;
			break;
		}
//		_exit_critical_bh(&phal->SdioTxFIFOFreePageLock, &irql);

		ret = (padapter->bDriverStopped == _TRUE) || (padapter->bSurpriseRemoved == _TRUE);
		if (ret) {
			RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
				 ("%s: bSurpriseRemoved(update TX FIFO page)\n", __func__));
			goto free_xmitbuf;
		}

		n++;
		//if ((n & 0x3FF) == 0) 
		if ((n % 2) == 0) 
		{		
			if (n > 5000) {
				DBG_8192C(KERN_NOTICE "%s: FIFO starvation!(%d) len=%d agg=%d page=(R)%d(A)%d\n",
					__func__, n, pxmitbuf->len, pxmitbuf->agg_num, pxmitbuf->pg_num, freePage[PageIdx] + freePage[PUBLIC_QUEUE_IDX]);
			} else {
				//RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
				//	("%s: FIFO starvation!(%d) len=%d agg=%d page=(R)%d(A)%d\n",
				//	__FUNCTION__, n, pxmitbuf->len, pxmitbuf->agg_num, pxmitbuf->pg_num, freePage[PageIdx] + freePage[PUBLIC_QUEUE_IDX]));
			}
			//rtw_yield_os();
			rtw_msleep_os(1);
		}

		// Total number of page is NOT available, so update current FIFO status
#ifdef CONFIG_CONCURRENT_MODE
		if (padapter->adapter_type > 0)
			pri_padapter = padapter->pbuddy_adapter;
#endif
		HalQueryTxBufferStatus8723ASdio(pri_padapter);

	} while (1);

	if ((padapter->bSurpriseRemoved == _TRUE)
#ifdef CONFIG_CONCURRENT_MODE
		||((padapter->pbuddy_adapter)&& (padapter->pbuddy_adapter->bSurpriseRemoved))
#endif
	){
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
			 ("%s: bSurpriseRemoved(wirte port)\n", __FUNCTION__));
		goto free_xmitbuf;
	}
	rtw_write_port(padapter, deviceId, pxmitbuf->len, (u8 *)pxmitbuf);

free_xmitbuf:
	//rtw_free_xmitframe(pxmitpriv, pframe);
	//pxmitbuf->priv_data = NULL;
	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);

	return _FAIL;
}
static void rtl8723bs_recv_tasklet(void *priv)
{
	PADAPTER				padapter;
	PHAL_DATA_TYPE			pHalData;
	struct recv_priv		*precvpriv;
	struct recv_buf 		*precvbuf;
	union recv_frame		*precvframe;
	struct recv_frame_hdr	*phdr;
	struct rx_pkt_attrib	*pattrib;
	u8			*ptr;
	_pkt		*ppkt;
	u32 		pkt_offset;
	_irqL		irql;


	padapter = (PADAPTER)priv;
	pHalData = GET_HAL_DATA(padapter);
	precvpriv = &padapter->recvpriv;

	do {
		precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue);
		if (NULL == precvbuf) break;

		ptr = precvbuf->pdata;

		while (ptr < precvbuf->ptail)
		{
			precvframe = rtw_alloc_recvframe(&precvpriv->free_recv_queue);
			if (precvframe == NULL) {
				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("rtl8723bs_recv_tasklet: no enough recv frame!\n"));
				rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

				// The case of can't allocte recvframe should be temporary,
				// schedule again and hope recvframe is available next time.
#ifdef PLATFORM_LINUX
				tasklet_schedule(&precvpriv->recv_tasklet);
#endif
				return;
			}

			phdr = &precvframe->u.hdr;
			pattrib = &phdr->attrib;

			rtl8723b_query_rx_desc_status(precvframe, ptr);

#if 0
			{
				int i, len = 64;
				u8 *pptr = ptr;

				if((*(pptr + RXDESC_SIZE + pattrib->drvinfo_sz) != 0x80) && (*(pptr + RXDESC_SIZE + pattrib->drvinfo_sz) != 0x40))
				{
					DBG_871X("##############RxDESC############### \n");
					for(i=0; i<32;i=i+16)
						DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(pptr+i),
						*(pptr+i+1), *(pptr+i+2) ,*(pptr+i+3) ,*(pptr+i+4),*(pptr+i+5), *(pptr+i+6), *(pptr+i+7), *(pptr+i+8), *(pptr+i+9), *(pptr+i+10),
						 *(pptr+i+11), *(pptr+i+12), *(pptr+i+13), *(pptr+i+14), *(pptr+i+15));
					
					if(pattrib->pkt_len < 100)
						len = pattrib->pkt_len;
					pptr = ptr + RXDESC_SIZE + pattrib->drvinfo_sz;
					DBG_871X("##############Len=%d############### \n", pattrib->pkt_len);
					for(i=0; i<len;i=i+16)
						DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(pptr+i),
						*(pptr+i+1), *(pptr+i+2) ,*(pptr+i+3) ,*(pptr+i+4),*(pptr+i+5), *(pptr+i+6), *(pptr+i+7), *(pptr+i+8), *(pptr+i+9), *(pptr+i+10),
						 *(pptr+i+11), *(pptr+i+12), *(pptr+i+13), *(pptr+i+14), *(pptr+i+15));
					DBG_871X("############################# \n");
				}
			}
#endif

			// fix Hardware RX data error, drop whole recv_buffer
			if ((!(pHalData->ReceiveConfig & RCR_ACRC32)) && pattrib->crc_err)
			{
				DBG_8192C("%s()-%d: RX Warning! rx CRC ERROR !!\n", __FUNCTION__, __LINE__);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->pkt_len;
#if 0 // reduce check to speed up
			if ((ptr + pkt_offset) > precvbuf->ptail) {
				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_,
						("%s: next pkt len(%p,%d) exceed ptail(%p)!\n",
						__FUNCTION__, ptr, pkt_offset, precvbuf->ptail));
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}
#endif

			if ((pattrib->crc_err) || (pattrib->icv_err))
			{
#ifdef CONFIG_MP_INCLUDED
				if (padapter->registrypriv.mp_mode == 1)
				{
					if ((check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _TRUE))//&&(padapter->mppriv.check_mp_pkt == 0))
					{
						if (pattrib->crc_err == 1)
							padapter->mppriv.rx_crcerrpktcount++;
					}
				}
				else
#endif
				{
					DBG_8192C("%s: crc_err=%d icv_err=%d, skip!\n", __FUNCTION__, pattrib->crc_err, pattrib->icv_err);
				}
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
			}
			else
			{
				ppkt = rtw_skb_clone(precvbuf->pskb);
				if (ppkt == NULL) {
					DBG_8192C("%s: no enough memory to allocate SKB!\n", __FUNCTION__);
					rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
					rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

					// The case of can't allocte skb is serious and may never be recovered,
					// once bDriverStopped is enable, this task should be stopped.
					if (padapter->bDriverStopped == _FALSE) {
#ifdef PLATFORM_LINUX
						tasklet_schedule(&precvpriv->recv_tasklet);
#endif
					}

					return;
				}

				phdr->pkt = ppkt;
				phdr->len = 0;
				phdr->rx_head = precvbuf->phead;
				phdr->rx_data = phdr->rx_tail = precvbuf->pdata;
				phdr->rx_end = precvbuf->pend;
				recvframe_put(precvframe, pkt_offset);
				recvframe_pull(precvframe, RXDESC_SIZE + pattrib->drvinfo_sz);
				if (pHalData->ReceiveConfig & RCR_APPFCS)
					recvframe_pull_tail(precvframe, IEEE80211_FCS_LEN);

				// move to drv info position
				ptr += RXDESC_SIZE;

				// update drv info
				if (pHalData->ReceiveConfig & RCR_APP_BA_SSN) {
					//rtl8723s_update_bassn(padapter, pdrvinfo);
					ptr += 4;
				}

				if (pattrib->pkt_rpt_type == NORMAL_RX) {
#ifdef CONFIG_CONCURRENT_MODE
					if (rtw_buddy_adapter_up(padapter))
					{
						if (pre_recv_entry(precvframe, precvbuf, ptr) != _SUCCESS) {
							RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
								("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
						}
					}
					else
#endif
					{
						if (pattrib->physt)
							rx_query_phy_status(precvframe, ptr);

						if (rtw_recv_entry(precvframe) != _SUCCESS)
						{
							RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("rtl8723bs_recv_tasklet: rtw_recv_entry(precvframe) != _SUCCESS\n"));
						}
					}
				}
				else {
#ifdef CONFIG_C2H_PACKET_EN
					if (pattrib->pkt_rpt_type == C2H_PACKET) {
						rtl8723b_c2h_packet_handler(padapter, precvframe->u.hdr.rx_data, pattrib->pkt_len);
					}
					else {
						DBG_8192C("%s: [WARNNING] RX type(%d) not be handled!\n",
							__FUNCTION__, pattrib->pkt_rpt_type);
					}
#endif
					rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				}
			}

			pkt_offset = _RND8(pkt_offset);
			precvbuf->pdata += pkt_offset;
			ptr = precvbuf->pdata;
		}

		rtw_skb_free(precvbuf->pskb);
		precvbuf->pskb = NULL;
		rtw_enqueue_recvbuf(precvbuf, &precvpriv->free_recv_buf_queue);
	} while (1);
}
static void rtl8723bs_recv_tasklet(void *priv)
{
	PADAPTER			padapter;
	PHAL_DATA_TYPE		pHalData;
	struct recv_priv		*precvpriv;
	struct recv_buf 	*precvbuf;
	union recv_frame		*precvframe;
	struct recv_frame_hdr	*phdr;
	struct rx_pkt_attrib	*pattrib;
	_irqL	irql;
	u8		*ptr;
	u32 	pkt_len, pkt_offset, skb_len, alloc_sz;
	_pkt		*pkt_copy = NULL;
	u8		shift_sz = 0, rx_report_sz = 0;


	padapter = (PADAPTER)priv;
	pHalData = GET_HAL_DATA(padapter);
	precvpriv = &padapter->recvpriv;

	do {
		precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue);
		if (NULL == precvbuf) break;

		ptr = precvbuf->pdata;

		while (ptr < precvbuf->ptail)
		{
			precvframe = rtw_alloc_recvframe(&precvpriv->free_recv_queue);
			if (precvframe == NULL)
			{
				DBG_8192C("%s: no enough recv frame!\n", __FUNCTION__);
				rtw_enqueue_recvbuf_to_head(precvbuf, &precvpriv->recv_buf_pending_queue);

				// The case of can't allocte recvframe should be temporary,
				// schedule again and hope recvframe is available next time.
#ifdef PLATFORM_LINUX
				tasklet_schedule(&precvpriv->recv_tasklet);
#endif
				return;
			}

			//rx desc parsing
			rtl8723b_query_rx_desc_status(precvframe, ptr);

			pattrib = &precvframe->u.hdr.attrib;

			// fix Hardware RX data error, drop whole recv_buffer
			if ((!(pHalData->ReceiveConfig & RCR_ACRC32)) && pattrib->crc_err)
			{
#if !(MP_DRIVER==1)
				DBG_8192C("%s()-%d: RX Warning! rx CRC ERROR !!\n", __FUNCTION__, __LINE__);
#endif
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			rx_report_sz = RXDESC_SIZE + pattrib->drvinfo_sz;
			pkt_offset = rx_report_sz + pattrib->shift_sz + pattrib->pkt_len;

			if ((ptr + pkt_offset) > precvbuf->ptail) {
				DBG_8192C("%s()-%d: : next pkt len(%p,%d) exceed ptail(%p)!\n", __FUNCTION__, __LINE__, ptr, pkt_offset, precvbuf->ptail);
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				break;
			}

			if ((pattrib->crc_err) || (pattrib->icv_err))
			{
#ifdef CONFIG_MP_INCLUDED
				if (padapter->registrypriv.mp_mode == 1)
				{
					if ((check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _TRUE))//&&(padapter->mppriv.check_mp_pkt == 0))
					{
						if (pattrib->crc_err == 1)
							padapter->mppriv.rx_crcerrpktcount++;
					}
				}
				else
#endif
				{
					DBG_8192C("%s: crc_err=%d icv_err=%d, skip!\n", __FUNCTION__, pattrib->crc_err, pattrib->icv_err);
				}
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
			}
			else
			{
				//	Modified by Albert 20101213
				//	For 8 bytes IP header alignment.
				if (pattrib->qos)	//	Qos data, wireless lan header length is 26
				{
					shift_sz = 6;
				}
				else
				{
					shift_sz = 0;
				}

				skb_len = pattrib->pkt_len;

				// for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet.
				// modify alloc_sz for recvive crc error packet by thomas 2011-06-02
				if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){
					//alloc_sz = 1664;	//1664 is 128 alignment.
					if(skb_len <= 1650)
						alloc_sz = 1664;
					else
						alloc_sz = skb_len + 14;
				}
				else {
					alloc_sz = skb_len;
					//	6 is for IP header 8 bytes alignment in QoS packet case.
					//	8 is for skb->data 4 bytes alignment.
					alloc_sz += 14;
				}

				pkt_copy = rtw_skb_alloc(alloc_sz);

				if (pkt_copy)
				{
					pkt_copy->dev = padapter->pnetdev;
					precvframe->u.hdr.pkt = pkt_copy;
					skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address
					skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz.
					_rtw_memcpy(pkt_copy->data, (ptr + rx_report_sz + pattrib->shift_sz), skb_len);
					precvframe->u.hdr.rx_head = pkt_copy->head;
					precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data;
					precvframe->u.hdr.rx_end = skb_end_pointer(pkt_copy);
				}
				else
				{
					if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0))
					{
						DBG_8192C("%s: alloc_skb fail, drop frag frame\n", __FUNCTION__);
						rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
						break;
					}

					precvframe->u.hdr.pkt = rtw_skb_clone(precvbuf->pskb);
					if(precvframe->u.hdr.pkt)
					{
						_pkt	*pkt_clone = precvframe->u.hdr.pkt;

						pkt_clone->data = ptr + rx_report_sz + pattrib->shift_sz;
						skb_reset_tail_pointer(pkt_clone);
						precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail
							= pkt_clone->data;
						precvframe->u.hdr.rx_end =	pkt_clone->data + skb_len;
					}
					else
					{
						DBG_8192C("%s: rtw_skb_clone fail\n", __FUNCTION__);
						rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
						break;
					}
				}

				recvframe_put(precvframe, skb_len);
				//recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE);

				if (pHalData->ReceiveConfig & RCR_APPFCS)
					recvframe_pull_tail(precvframe, IEEE80211_FCS_LEN);

				// move to drv info position
				ptr += RXDESC_SIZE;

				// update drv info
				if (pHalData->ReceiveConfig & RCR_APP_BA_SSN) {
					//rtl8723s_update_bassn(padapter, pdrvinfo);
					ptr += 4;
				}

				if (pattrib->pkt_rpt_type == NORMAL_RX) {
					// skip the rx packet with abnormal length
					if (pattrib->pkt_len < 14 || pattrib->pkt_len > 8192) {	
						DBG_8192C("skip abnormal rx packet(%d)\n", pattrib->pkt_len);
						rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
						break;
					}

#ifdef CONFIG_CONCURRENT_MODE
					if (rtw_buddy_adapter_up(padapter))
					{
						if (pre_recv_entry(precvframe, precvbuf, ptr) != _SUCCESS) {
							RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
								("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
						}
					}
					else
#endif
					{
						if (pattrib->physt)
							rx_query_phy_status(precvframe, ptr);

						if (rtw_recv_entry(precvframe) != _SUCCESS) {
							RT_TRACE(_module_rtl871x_recv_c_, _drv_dump_, ("%s: rtw_recv_entry(precvframe) != _SUCCESS\n",__FUNCTION__));
						}
					}
				}
				else {
#ifdef CONFIG_C2H_PACKET_EN
					if (pattrib->pkt_rpt_type == C2H_PACKET) {
						rtl8723b_c2h_packet_handler(padapter, precvframe->u.hdr.rx_data, pattrib->pkt_len);
					}
					else {
						DBG_8192C("%s: [WARNNING] RX type(%d) not be handled!\n",
							__FUNCTION__, pattrib->pkt_rpt_type);
					}
#endif
					rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				}
			}

			pkt_offset = _RND8(pkt_offset);
			precvbuf->pdata += pkt_offset;
			ptr = precvbuf->pdata;
			precvframe = NULL;
			pkt_copy = NULL;
		}

		rtw_enqueue_recvbuf(precvbuf, &precvpriv->free_recv_buf_queue);
	} while (1);

}
/*
 * Description
 *	Transmit xmitbuf to hardware tx fifo
 *
 * Return
 *	_SUCCESS	ok
 *	_FAIL		something error
 */
s32 rtl8188es_xmit_buf_handler(PADAPTER padapter)
{
	struct mlme_priv *pmlmepriv;
	struct xmit_priv *pxmitpriv;
	struct xmit_buf *pxmitbuf;
	struct xmit_frame *pframe;
	u8 *freePage;
	u32 requiredPage;
	u8 PageIdx , queue_empty;
	_irqL irql;
	u32 n;
	s32 ret;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
#ifdef CONFIG_CONCURRENT_MODE
	s32 buddy_rm_stop = _FAIL;
#endif

	pmlmepriv = &padapter->mlmepriv;
	pxmitpriv = &padapter->xmitpriv;
	freePage = pHalData->SdioTxFIFOFreePage;

	ret = _rtw_down_sema(&pxmitpriv->xmit_sema);
	if (ret == _FAIL) {
		RT_TRACE(_module_hal_xmit_c_, _drv_emerg_, ("down SdioXmitBufSema fail!\n"));
		return _FAIL;
	}

//#ifdef CONFIG_CONCURRENT_MODE
//	if (padapter->pbuddy_adapter->bup){
//		if ((padapter->pbuddy_adapter->bSurpriseRemoved == _TRUE) ||
//			(padapter->pbuddy_adapter->bDriverStopped == _TRUE))
//			buddy_rm_stop = _TRUE;
//	}
//#endif
	if ((padapter->bSurpriseRemoved == _TRUE) ||
		(padapter->bDriverStopped == _TRUE)
//#ifdef CONFIG_CONCURRENT_MODE
//		||(buddy_rm_stop == _TRUE)
//#endif
	) {

#ifdef CONFIG_LPS_LCLK
		rtw_unregister_tx_alive(padapter);
#endif
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_,
				 ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)\n",
				  __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved));
		return _FAIL;
	}

#ifdef CONFIG_LPS_LCLK
	ret = rtw_register_tx_alive(padapter);
	if (ret != _SUCCESS) return _SUCCESS;
#endif

	do {
		queue_empty = rtl8188es_dequeue_writeport(padapter, freePage);
//	dump secondary adapter xmitbuf
#ifdef CONFIG_CONCURRENT_MODE
		if(rtw_buddy_adapter_up(padapter))
			queue_empty &= rtl8188es_dequeue_writeport(padapter->pbuddy_adapter, freePage);
#endif

	} while ( !queue_empty);

#ifdef CONFIG_LPS_LCLK
	rtw_unregister_tx_alive(padapter);
#endif
	return _SUCCESS;
}
void rtl8188es_fill_default_txdesc(
	struct xmit_frame *pxmitframe,
	u8 *pbuf)
{
	PADAPTER padapter;
	HAL_DATA_TYPE *pHalData;
	struct mlme_ext_priv *pmlmeext;
	struct mlme_ext_info *pmlmeinfo;
	struct dm_priv *pdmpriv;
	struct pkt_attrib *pattrib;
	PTXDESC ptxdesc;
	s32 bmcst;


	padapter = pxmitframe->padapter;
	pHalData = GET_HAL_DATA(padapter);
	//pdmpriv = &pHalData->dmpriv;
	pmlmeext = &padapter->mlmeextpriv;
	pmlmeinfo = &(pmlmeext->mlmext_info);

	pattrib = &pxmitframe->attrib;
	bmcst = IS_MCAST(pattrib->ra);

	ptxdesc = (PTXDESC)pbuf;

#ifdef CONFIG_CONCURRENT_MODE
	if(rtw_buddy_adapter_up(padapter) && padapter->adapter_type > PRIMARY_ADAPTER)
		pHalData = GET_HAL_DATA(padapter->pbuddy_adapter);
#endif //CONFIG_CONCURRENT_MODE

	if (pxmitframe->frame_tag == DATA_FRAMETAG)
	{
		ptxdesc->macid = pattrib->mac_id; // CAM_ID(MAC_ID)

		if (pattrib->ampdu_en == _TRUE)
			ptxdesc->agg_en = 1; // AGG EN
		else
			ptxdesc->bk = 1; // AGG BK

		ptxdesc->qsel = pattrib->qsel;
		ptxdesc->rate_id = pattrib->raid;

		fill_txdesc_sectype(pattrib, ptxdesc);

		ptxdesc->seq = pattrib->seqnum;

		//todo: qos_en

		ptxdesc->userate = 1; // driver uses rate

		if ((pattrib->ether_type != 0x888e) &&
			(pattrib->ether_type != 0x0806) &&
			(pattrib->dhcp_pkt != 1))
		{
			// Non EAP & ARP & DHCP type data packet

			fill_txdesc_vcs(pattrib, ptxdesc);
			fill_txdesc_phy(pattrib, ptxdesc);

			ptxdesc->rtsrate = 8; // RTS Rate=24M
			ptxdesc->data_ratefb_lmt = 0x1F;
			ptxdesc->rts_ratefb_lmt = 0xF;
		#if (RATE_ADAPTIVE_SUPPORT == 1)
			if(pattrib->ht_en){
				ptxdesc->sgi = ODM_RA_GetShortGI_8188E(&pHalData->odmpriv,pattrib->mac_id);
			}
			ptxdesc->datarate = ODM_RA_GetDecisionRate_8188E(&pHalData->odmpriv,pattrib->mac_id);

	               //for debug
	               #if 0
	                if(padapter->fix_rate!= 0xFF){
					ptxdesc->datarate = padapter->fix_rate;
				}
	                #endif
			#if (POWER_TRAINING_ACTIVE==1)
			ptxdesc->pwr_status = ODM_RA_GetHwPwrStatus_8188E(&pHalData->odmpriv,pattrib->mac_id);
			#endif
		#else
			ptxdesc->datarate = 0x13; //MCS7
			ptxdesc->sgi = 1; // SGI
			if(padapter->fix_rate!= 0xFF){//modify datat by iwpriv
				ptxdesc->datarate = padapter->fix_rate;
			}
		#endif


		}
		else
		{
			// EAP data packet and ARP and DHCP packet.
			// Use the 1M or 6M data rate to send the EAP/ARP packet.
			// This will maybe make the handshake smooth.

			ptxdesc->bk = 1; // AGG BK

			if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
				ptxdesc->data_short = 1;// DATA_SHORT

			ptxdesc->datarate = MRateToHwRate(pmlmeext->tx_rate);
		}

		ptxdesc->usb_txagg_num = pxmitframe->agg_num;
	}
	else if (pxmitframe->frame_tag == MGNT_FRAMETAG)
	{
//		RT_TRACE(_module_hal_xmit_c_, _drv_notice_, ("%s: MGNT_FRAMETAG\n", __FUNCTION__));

		ptxdesc->macid = pattrib->mac_id; // CAM_ID(MAC_ID)
		ptxdesc->qsel = pattrib->qsel;
		ptxdesc->rate_id = pattrib->raid; // Rate ID
		ptxdesc->seq = pattrib->seqnum;
		ptxdesc->userate = 1; // driver uses rate, 1M
		ptxdesc->rty_lmt_en = 1; // retry limit enable
		ptxdesc->data_rt_lmt = 6; // retry limit = 6

#ifdef CONFIG_XMIT_ACK
		//CCX-TXRPT ack for xmit mgmt frames.
		if (pxmitframe->ack_report) {
			#ifdef DBG_CCX
			static u16 ccx_sw = 0x123;
			txdesc_set_ccx_sw_88e(ptxdesc, ccx_sw);
			DBG_871X("%s set ccx, sw:0x%03x\n", __func__, ccx_sw);
			ccx_sw = (ccx_sw+1)%0xfff;
			#endif
			ptxdesc->ccx = 1;
		}
#endif //CONFIG_XMIT_ACK

#ifdef CONFIG_INTEL_PROXIM
		if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
			DBG_871X("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
			ptxdesc->datarate = pattrib->rate;
		}
		else
#endif
		{
			ptxdesc->datarate = MRateToHwRate(pmlmeext->tx_rate);
		}
	}
	else if (pxmitframe->frame_tag == TXAGG_FRAMETAG)
	{
		RT_TRACE(_module_hal_xmit_c_, _drv_warning_, ("%s: TXAGG_FRAMETAG\n", __FUNCTION__));
	}
#ifdef CONFIG_MP_INCLUDED
	else if (pxmitframe->frame_tag == MP_FRAMETAG)
	{
		struct tx_desc *pdesc;

		pdesc = (struct tx_desc*)ptxdesc;
		RT_TRACE(_module_hal_xmit_c_, _drv_notice_, ("%s: MP_FRAMETAG\n", __FUNCTION__));
		fill_txdesc_for_mp(padapter, pdesc);

		pdesc->txdw0 = le32_to_cpu(pdesc->txdw0);
		pdesc->txdw1 = le32_to_cpu(pdesc->txdw1);
		pdesc->txdw2 = le32_to_cpu(pdesc->txdw2);
		pdesc->txdw3 = le32_to_cpu(pdesc->txdw3);
		pdesc->txdw4 = le32_to_cpu(pdesc->txdw4);
		pdesc->txdw5 = le32_to_cpu(pdesc->txdw5);
		pdesc->txdw6 = le32_to_cpu(pdesc->txdw6);
		pdesc->txdw7 = le32_to_cpu(pdesc->txdw7);
	}
#endif // CONFIG_MP_INCLUDED
	else
	{
		RT_TRACE(_module_hal_xmit_c_, _drv_warning_, ("%s: frame_tag=0x%x\n", __FUNCTION__, pxmitframe->frame_tag));

		ptxdesc->macid = 4; // CAM_ID(MAC_ID)
		ptxdesc->rate_id = 6; // Rate ID
		ptxdesc->seq = pattrib->seqnum;
		ptxdesc->userate = 1; // driver uses rate
		ptxdesc->datarate = MRateToHwRate(pmlmeext->tx_rate);
	}

	ptxdesc->pktlen = pattrib->last_txcmdsz;
	if (pxmitframe->frame_tag == DATA_FRAMETAG){
		#ifdef CONFIG_TX_EARLY_MODE
		ptxdesc->offset = TXDESC_SIZE +EARLY_MODE_INFO_SIZE ;
		ptxdesc->pkt_offset = 0x01;
		#else
		ptxdesc->offset = TXDESC_SIZE ;
		ptxdesc->pkt_offset = 0;
		#endif
	}
	else{
		ptxdesc->offset = TXDESC_SIZE ;
	}

	if (bmcst) ptxdesc->bmc = 1;
	ptxdesc->ls = 1;
	ptxdesc->fs = 1;
	ptxdesc->own = 1;

	// 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
	// (1) The sequence number of each non-Qos frame / broadcast / multicast /
	// mgnt frame should be controled by Hw because Fw will also send null data
	// which we cannot control when Fw LPS enable.
	// --> default enable non-Qos data sequense number. 2010.06.23. by tynli.
	// (2) Enable HW SEQ control for beacon packet, because we use Hw beacon.
	// (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets.
	// 2010.06.23. Added by tynli.
	if (!pattrib->qos_en)
	{
		// Hw set sequence number
		ptxdesc->hwseq_en = 1; // HWSEQ_EN
		ptxdesc->hwseq_sel = 0; // HWSEQ_SEL
	}

}
static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt)
{	
      int	pull=0;
	uint	qsel;
	u8 data_rate,pwr_status,offset;
	_adapter			*padapter = pxmitframe->padapter;
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;		
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	//struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	struct tx_desc	*ptxdesc = (struct tx_desc *)pmem;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	sint	bmcst = IS_MCAST(pattrib->ra);
	
#ifdef CONFIG_P2P
	struct wifidirect_info*	pwdinfo = &padapter->wdinfo;
#endif //CONFIG_P2P

#ifdef CONFIG_CONCURRENT_MODE
	if(rtw_buddy_adapter_up(padapter) && padapter->adapter_type > PRIMARY_ADAPTER)	
		pHalData = GET_HAL_DATA(padapter->pbuddy_adapter);				
#endif //CONFIG_CONCURRENT_MODE

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX 
if (padapter->registrypriv.mp_mode == 0)
{
	if((!bagg_pkt) &&(urb_zero_packet_chk(padapter, sz)==0))//(sz %512) != 0
	//if((!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE))	
	{
		ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
		//DBG_8192C("==> non-agg-pkt,shift pointer...\n");
		pull = 1;
	}
}
#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX

	_rtw_memset(ptxdesc, 0, sizeof(struct tx_desc));
	
        //4 offset 0
	ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
	//DBG_8192C("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt);
	ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);//update TXPKTSIZE
	
	offset = TXDESC_SIZE + OFFSET_SZ;		

	#ifdef CONFIG_TX_EARLY_MODE	
	if(bagg_pkt){		
		offset += EARLY_MODE_INFO_SIZE ;//0x28			
	}
	#endif
	//DBG_8192C("%s==>offset(0x%02x)  \n",__FUNCTION__,offset);
	ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);//32 bytes for TX Desc

	if (bmcst) ptxdesc->txdw0 |= cpu_to_le32(BMC);

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if (padapter->registrypriv.mp_mode == 0)
{
	if(!bagg_pkt){
		if((pull) && (pxmitframe->pkt_offset>0)) {	
			pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;		
		}
	}
}	
#endif
	//DBG_8192C("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset);

	// pkt_offset, unit:8 bytes padding
	if (pxmitframe->pkt_offset > 0)
		ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);

	//driver uses rate
	ptxdesc->txdw4 |= cpu_to_le32(USERATE);//rate control always by driver

	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");		

		//offset 4
		ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x3F);

		qsel = (uint)(pattrib->qsel & 0x0000001f);
		//DBG_8192C("==> macid(%d) qsel:0x%02x \n",pattrib->mac_id,qsel);
		ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);

		ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< RATE_ID_SHT) & 0x000F0000);

		fill_txdesc_sectype(pattrib, ptxdesc);

		if(pattrib->ampdu_en==_TRUE){
			ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);//AGG EN
		
			//SET_TX_DESC_MAX_AGG_NUM_88E(pDesc, 0x1F);
			//SET_TX_DESC_MCSG1_MAX_LEN_88E(pDesc, 0x6);
			//SET_TX_DESC_MCSG2_MAX_LEN_88E(pDesc, 0x6);
			//SET_TX_DESC_MCSG3_MAX_LEN_88E(pDesc, 0x6);
			//SET_TX_DESC_MCS7_SGI_MAX_LEN_88E(pDesc, 0x6);
			ptxdesc->txdw6 = 0x6666f800;		
		}
		else{
			ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);//AGG BK
		}
		
		//offset 8
		

		//offset 12
		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<< SEQ_SHT)&0x0FFF0000);


		//offset 16 , offset 20
		if (pattrib->qos_en)
			ptxdesc->txdw4 |= cpu_to_le32(QOS);//QoS

		//offset 20
	#ifdef CONFIG_USB_TX_AGGREGATION
		if (pxmitframe->agg_num > 1){
			//DBG_8192C("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num );
			ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000);
		}
	#endif

		if ((pattrib->ether_type != 0x888e) &&
		    (pattrib->ether_type != 0x0806) &&
		    (pattrib->ether_type != 0x88b4) &&
		    (pattrib->dhcp_pkt != 1))
		{
			//Non EAP & ARP & DHCP type data packet
              	
			fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
			fill_txdesc_phy(pattrib, &ptxdesc->txdw4);

			ptxdesc->txdw4 |= cpu_to_le32(0x00000008);//RTS Rate=24M
			ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);//DATA/RTS  Rate FB LMT			

	#if (RATE_ADAPTIVE_SUPPORT == 1)		
			if(pattrib->ht_en){
				if( ODM_RA_GetShortGI_8188E(&pHalData->odmpriv,pattrib->mac_id))
					ptxdesc->txdw5 |= cpu_to_le32(SGI);//SGI
			}
				
			data_rate =ODM_RA_GetDecisionRate_8188E(&pHalData->odmpriv,pattrib->mac_id);			
			ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F);

               	//for debug
               	#if 0
			if(padapter->fix_rate!= 0xFF){
				ptxdesc->datarate = padapter->fix_rate;
			}
			#endif

			#if (POWER_TRAINING_ACTIVE==1)
			pwr_status = ODM_RA_GetHwPwrStatus_8188E(&pHalData->odmpriv,pattrib->mac_id);
			ptxdesc->txdw4 |=cpu_to_le32( (pwr_status & 0x7)<< PWR_STATUS_SHT);
			#endif //(POWER_TRAINING_ACTIVE==1)
	#else//if (RATE_ADAPTIVE_SUPPORT == 1)	
				
			if(pattrib->ht_en)
				ptxdesc->txdw5 |= cpu_to_le32(SGI);//SGI

			data_rate = 0x13; //default rate: MCS7									
			 if(padapter->fix_rate!= 0xFF){//rate control by iwpriv
				data_rate = padapter->fix_rate;				
			}
			ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F); 

	#endif//if (RATE_ADAPTIVE_SUPPORT == 1)				

		}
		else
		{
			// EAP data packet and ARP packet and DHCP.
			// Use the 1M data rate to send the EAP/ARP packet.
			// This will maybe make the handshake smooth.

			ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);//AGG BK		   

			if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
				ptxdesc->txdw4 |= cpu_to_le32(BIT(24));// DATA_SHORT

			ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
		}

#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
		//offset 24
		if ( pattrib->hw_tcp_csum == 1 ) {
			// ptxdesc->txdw6 = 0; // clear TCP_CHECKSUM and IP_CHECKSUM. It's zero already!!
			u8 ip_hdr_offset = 32 + pattrib->hdrlen + pattrib->iv_len + 8;
			ptxdesc->txdw7 = (1 << 31) | (ip_hdr_offset << 16);
			DBG_8192C("ptxdesc->txdw7 = %08x\n", ptxdesc->txdw7);
		}
#endif
	}
	else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");	
		
		//offset 4		
		ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x3f);
		
		qsel = (uint)(pattrib->qsel&0x0000001f);
		ptxdesc->txdw1 |= cpu_to_le32((qsel<<QSEL_SHT)&0x00001f00);

		ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< RATE_ID_SHT) & 0x000f0000);
		
		//fill_txdesc_sectype(pattrib, ptxdesc);
		
		//offset 8		
#ifdef CONFIG_XMIT_ACK
		//CCX-TXRPT ack for xmit mgmt frames.
		if (pxmitframe->ack_report) {
			#ifdef DBG_CCX
			static u16 ccx_sw = 0x123;
			ptxdesc->txdw7 |= cpu_to_le32(((ccx_sw)<<16)&0x0fff0000);
			DBG_871X("%s set ccx, sw:0x%03x\n", __func__, ccx_sw);
			ccx_sw = (ccx_sw+1)%0xfff;
			#endif
			ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
		}
#endif //CONFIG_XMIT_ACK

		//offset 12
		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0FFF0000);
				
		//offset 20
		ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);//retry limit enable
		if(pattrib->retry_ctrl == _TRUE)
			ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6
		else
			ptxdesc->txdw5 |= cpu_to_le32(0x00300000);//retry limit = 12

#ifdef CONFIG_INTEL_PROXIM
		if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
			DBG_871X("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
			ptxdesc->txdw5 |= cpu_to_le32( pattrib->rate);
		}
		else
#endif
		{
			ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
		}
	}
	else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
	{
		DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
	}
#ifdef CONFIG_MP_INCLUDED
	else if(((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) &&
			(padapter->registrypriv.mp_mode == 1))
	{
		fill_txdesc_for_mp(padapter, ptxdesc);
	}
#endif
	else
	{
		DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);

		//offset 4	
		ptxdesc->txdw1 |= cpu_to_le32((4)&0x3f);//CAM_ID(MAC_ID)

		ptxdesc->txdw1 |= cpu_to_le32((6<< RATE_ID_SHT) & 0x000f0000);//raid

		//offset 8		

		//offset 12
		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0fff0000);

		//offset 20
		ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
	}

	// 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
	// (1) The sequence number of each non-Qos frame / broadcast / multicast /
	// mgnt frame should be controled by Hw because Fw will also send null data
	// which we cannot control when Fw LPS enable.
	// --> default enable non-Qos data sequense number. 2010.06.23. by tynli.
	// (2) Enable HW SEQ control for beacon packet, because we use Hw beacon.
	// (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets.
	// 2010.06.23. Added by tynli.
	if(!pattrib->qos_en)
	{		
		//ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
		//ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.

		ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); // Hw set sequence number
		ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); 	// Hw set sequence number
		
	}

#ifdef CONFIG_HW_ANTENNA_DIVERSITY //CONFIG_ANTENNA_DIVERSITY 
	ODM_SetTxAntByTxInfo_88E(&pHalData->odmpriv, pmem, pattrib->mac_id);
#endif

	rtl8188eu_cal_txdesc_chksum(ptxdesc);
	_dbg_dump_tx_info(padapter,pxmitframe->frame_tag,ptxdesc);	
	return pull;
		
}
Beispiel #16
0
int recvbuf2recvframe(PADAPTER padapter, void *ptr)
{
	u8	*pbuf;
	u8	pkt_cnt = 0;
	u32	pkt_offset;
	s32	transfer_len;
	u8				*pphy_status = NULL;	
	union recv_frame	*precvframe = NULL;
	struct rx_pkt_attrib	*pattrib = NULL;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct recv_priv	*precvpriv = &padapter->recvpriv;
	_queue			*pfree_recv_queue = &precvpriv->free_recv_queue;
	_pkt *pskb;

#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
	pskb = NULL;
	transfer_len = (s32)((struct recv_buf*)ptr)->transfer_len;
	pbuf = ((struct recv_buf*)ptr)->pbuf;
#else
	pskb = (_pkt*)ptr;
	transfer_len = (s32)pskb->len;
	pbuf = pskb->data;
#endif//CONFIG_USE_USB_BUFFER_ALLOC_RX


#ifdef CONFIG_USB_RX_AGGREGATION
	pkt_cnt = GET_RX_STATUS_DESC_USB_AGG_PKTNUM_8812(pbuf);
#endif

	do{
		precvframe = rtw_alloc_recvframe(pfree_recv_queue);
		if(precvframe==NULL)
		{
			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: precvframe==NULL\n"));
			DBG_8192C("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__, __LINE__);	
			goto _exit_recvbuf2recvframe;
		}

		_rtw_init_listhead(&precvframe->u.hdr.list);	
		precvframe->u.hdr.precvbuf = NULL;	//can't access the precvbuf for new arch.
		precvframe->u.hdr.len=0;

		rtl8812_query_rx_desc_status(precvframe, pbuf);

		pattrib = &precvframe->u.hdr.attrib;		
				
		if ((padapter->registrypriv.mp_mode == 0) && ((pattrib->crc_err) || (pattrib->icv_err)))
		{
			DBG_8192C("%s: RX Warning! crc_err=%d icv_err=%d, skip!\n", __FUNCTION__, pattrib->crc_err, pattrib->icv_err);

			rtw_free_recvframe(precvframe, pfree_recv_queue);
			goto _exit_recvbuf2recvframe;
		}

		pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;

		if((pattrib->pkt_len<=0) || (pkt_offset>transfer_len))
		{	
			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("recvbuf2recvframe: pkt_len<=0\n"));
			DBG_8192C("%s()-%d: RX Warning!,pkt_len<=0 or pkt_offset> transfer_len \n", __FUNCTION__, __LINE__);	
			rtw_free_recvframe(precvframe, pfree_recv_queue);
			goto _exit_recvbuf2recvframe;
		}

#ifdef CONFIG_RX_PACKET_APPEND_FCS
		if(pattrib->pkt_rpt_type == NORMAL_RX)
			pattrib->pkt_len -= IEEE80211_FCS_LEN;
#endif
		if(rtw_os_alloc_recvframe(padapter, precvframe, 
			(pbuf + pattrib->shift_sz + pattrib->drvinfo_sz + RXDESC_SIZE), pskb) == _FAIL)
		{
			rtw_free_recvframe(precvframe, pfree_recv_queue);

			goto _exit_recvbuf2recvframe;
		}

		recvframe_put(precvframe, pattrib->pkt_len);
		//recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE);

		if(pattrib->pkt_rpt_type == NORMAL_RX)//Normal rx packet
		{
			if(pattrib->physt)
				pphy_status = (pbuf + RXDESC_OFFSET);

#ifdef CONFIG_CONCURRENT_MODE
			if(rtw_buddy_adapter_up(padapter))
			{
				if(pre_recv_entry(precvframe, pphy_status) != _SUCCESS)
				{
					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
						("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
				}
			}
#endif //CONFIG_CONCURRENT_MODE

			if(pattrib->physt && pphy_status)
				rx_query_phy_status(precvframe, pphy_status);

			if(rtw_recv_entry(precvframe) != _SUCCESS)
			{
				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
					("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
			}

		}
		else{ // pkt_rpt_type == TX_REPORT1-CCX, TX_REPORT2-TX RTP,HIS_REPORT-USB HISR RTP
			if (pattrib->pkt_rpt_type == C2H_PACKET) {
				//DBG_8192C("rx C2H_PACKET \n");
				C2HPacketHandler_8812(padapter,precvframe->u.hdr.rx_data,pattrib->pkt_len);
			}
			rtw_free_recvframe(precvframe, pfree_recv_queue);
		}

#ifdef CONFIG_USB_RX_AGGREGATION
		// jaguar 8-byte alignment
		pkt_offset = (u16)_RND8(pkt_offset);
		pkt_cnt--;
		pbuf += pkt_offset;
#endif
		transfer_len -= pkt_offset;
		precvframe = NULL;

	}while(transfer_len>0);

_exit_recvbuf2recvframe:

	return _SUCCESS;	
}