Beispiel #1
0
void sb1250_time_init(void)
{
	int cpu = smp_processor_id();
	int irq = K_INT_TIMER_0+cpu;

	/* Only have 4 general purpose timers */
	if (cpu > 3) {
		BUG();
	}

	if (!cpu) {
		/* Use our own gettimeoffset() routine */
		do_gettimeoffset = sb1250_gettimeoffset;
	}

	sb1250_mask_irq(cpu, irq);

	/* Map the timer interrupt to ip[4] of this cpu */
	bus_writeq(IMR_IP4_VAL,
		   IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
			  (irq << 3)));

	/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
	/* Disable the timer and set up the count */
	bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
#ifdef CONFIG_SIMULATION
	bus_writeq(50000 / HZ,
		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#else
	bus_writeq(1000000/HZ,
		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#endif

	/* Set the timer running */
	bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));

	sb1250_unmask_irq(cpu, irq);
	sb1250_steal_irq(irq);
	/*
	 * This interrupt is "special" in that it doesn't use the request_irq
	 * way to hook the irq line.  The timer interrupt is initialized early
	 * enough to make this a major pain, and it's also firing enough to
	 * warrant a bit of special case code.  sb1250_timer_interrupt is
	 * called directly from irq_handler.S when IP[4] is set during an
	 * interrupt
	 */
}
Beispiel #2
0
void __cpuinit sb1250_clockevent_init(void)
{
	unsigned int cpu = smp_processor_id();
	unsigned int irq = K_INT_TIMER_0 + cpu;
	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);

	/* Only have 4 general purpose timers, and we use last one as hpt */
	BUG_ON(cpu > 2);

	sprintf(name, "sb1250-counter-%d", cpu);
	cd->name		= name;
	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
				  CLOCK_EVT_FEAT_ONESHOT;
	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
	cd->rating		= 200;
	cd->irq			= irq;
	cd->cpumask		= cpumask_of(cpu);
	cd->set_next_event	= sibyte_next_event;
	cd->set_mode		= sibyte_set_mode;
	clockevents_register_device(cd);

	sb1250_mask_irq(cpu, irq);

	/*
	 * Map the timer interrupt to IP[4] of this cpu
	 */
	__raw_writeq(IMR_IP4_VAL,
		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
			    (irq << 3)));

	sb1250_unmask_irq(cpu, irq);

	action->handler	= sibyte_counter_handler;
	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
	action->mask	= cpumask_of_cpu(cpu);
	action->name	= name;
	action->dev_id	= cd;

	irq_set_affinity(irq, cpumask_of(cpu));
	setup_irq(irq, action);
}
Beispiel #3
0
static void ack_sb1250_irq(struct irq_data *d)
{
	unsigned int irq = d->irq;
#ifdef CONFIG_SIBYTE_HAS_LDT
	u64 pending;

	/*
	 * If the interrupt was an HT interrupt, now is the time to
	 * clear it.  NOTE: we assume the HT bridge was set up to
	 * deliver the interrupts to all CPUs (which makes affinity
	 * changing easier for us)
	 */
	pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
						    R_IMR_LDT_INTERRUPT)));
	pending &= ((u64)1 << (irq));
	if (pending) {
		int i;
		for (i=0; i<NR_CPUS; i++) {
			int cpu;
#ifdef CONFIG_SMP
			cpu = cpu_logical_map(i);
#else
			cpu = i;
#endif
			/*
			 * Clear for all CPUs so an affinity switch
			 * doesn't find an old status
			 */
			__raw_writeq(pending,
				     IOADDR(A_IMR_REGISTER(cpu,
						R_IMR_LDT_INTERRUPT_CLR)));
		}

		/*
		 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
		 * Pass 2, the LDT world may be edge-triggered, but
		 * this EOI shouldn't hurt.  If they are
		 * level-sensitive, the EOI is required.
		 */
		*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
	}
#endif
	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
}
Beispiel #4
0
static void disable_sb1250_irq(struct irq_data *d)
{
	unsigned int irq = d->irq;

	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
}
Beispiel #5
0
static void disable_sb1250_irq(unsigned int irq)
{
	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
}