int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
static const char ifname[] = "usbpn%d";
const struct usb_cdc_union_desc *union_header = NULL;
const struct usb_host_interface *data_desc;
struct usb_interface *data_intf;
struct usb_device *usbdev = interface_to_usbdev(intf);
struct net_device *dev;
struct usbpn_dev *pnd;
u8 *data;
int phonet = 0;
int len, err;
data = intf->altsetting->extra;
len = intf->altsetting->extralen;
while (len >= 3) {
u8 dlen = data[0];
if (dlen < 3)
return -EINVAL;
/* bDescriptorType */
if (data[1] == USB_DT_CS_INTERFACE) {
/* bDescriptorSubType */
switch (data[2]) {
case USB_CDC_UNION_TYPE:
if (union_header || dlen < 5)
break;
union_header =
(struct usb_cdc_union_desc *)data;
break;
case 0xAB:
phonet = 1;
break;
}
}
data += dlen;
len -= dlen;
}
if (!union_header || !phonet)
return -EINVAL;
data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
if (data_intf == NULL)
return -ENODEV;
/* Data interface has one inactive and one active setting */
if (data_intf->num_altsetting != 2)
return -EINVAL;
if (data_intf->altsetting[0].desc.bNumEndpoints == 0 &&
data_intf->altsetting[1].desc.bNumEndpoints == 2)
data_desc = data_intf->altsetting + 1;
else
if (data_intf->altsetting[0].desc.bNumEndpoints == 2 &&
data_intf->altsetting[1].desc.bNumEndpoints == 0)
data_desc = data_intf->altsetting;
else
return -EINVAL;
dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
ifname, usbpn_setup);
if (!dev)
return -ENOMEM;
pnd = netdev_priv(dev);
SET_NETDEV_DEV(dev, &intf->dev);
netif_stop_queue(dev);
pnd->dev = dev;
pnd->usb = usb_get_dev(usbdev);
pnd->intf = intf;
pnd->data_intf = data_intf;
spin_lock_init(&pnd->tx_lock);
spin_lock_init(&pnd->rx_lock);
/* Endpoints */
if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
data_desc->endpoint[0].desc.bEndpointAddress);
pnd->tx_pipe = usb_sndbulkpipe(usbdev,
data_desc->endpoint[1].desc.bEndpointAddress);
} else {
pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
data_desc->endpoint[1].desc.bEndpointAddress);
pnd->tx_pipe = usb_sndbulkpipe(usbdev,
data_desc->endpoint[0].desc.bEndpointAddress);
}
pnd->active_setting = data_desc - data_intf->altsetting;
err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
if (err)
goto out;
/* Force inactive mode until the network device is brought UP */
usb_set_interface(usbdev, union_header->bSlaveInterface0,
!pnd->active_setting);
usb_set_intfdata(intf, pnd);
err = register_netdev(dev);
if (err) {
usb_driver_release_interface(&usbpn_driver, data_intf);
goto out;
}
dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
return 0;
out:
usb_set_intfdata(intf, NULL);
free_netdev(dev);
return err;
}
static int acm_probe (struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_cdc_union_desc *union_header = NULL;
struct usb_cdc_country_functional_desc *cfd = NULL;
char *buffer = intf->altsetting->extra;
int buflen = intf->altsetting->extralen;
struct usb_interface *control_interface;
struct usb_interface *data_interface;
struct usb_endpoint_descriptor *epctrl;
struct usb_endpoint_descriptor *epread;
struct usb_endpoint_descriptor *epwrite;
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct acm *acm;
int minor;
int ctrlsize,readsize;
u8 *buf;
u8 ac_management_function = 0;
u8 call_management_function = 0;
int call_interface_num = -1;
int data_interface_num;
unsigned long quirks;
int num_rx_buf;
int i;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR;
/* handle quirks deadly to normal probing*/
if (quirks == NO_UNION_NORMAL) {
data_interface = usb_ifnum_to_if(usb_dev, 1);
control_interface = usb_ifnum_to_if(usb_dev, 0);
goto skip_normal_probe;
}
/* normal probing*/
if (!buffer) {
err("Weird descriptor references\n");
return -EINVAL;
}
if (!buflen) {
if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
err("Zero length descriptor references\n");
return -EINVAL;
}
}
while (buflen > 0) {
if (buffer [1] != USB_DT_CS_INTERFACE) {
err("skipping garbage\n");
goto next_desc;
}
switch (buffer [2]) {
case USB_CDC_UNION_TYPE: /* we've found it */
if (union_header) {
err("More than one union descriptor, skipping ...");
goto next_desc;
}
union_header = (struct usb_cdc_union_desc *)
buffer;
break;
case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
cfd = (struct usb_cdc_country_functional_desc *)buffer;
break;
case USB_CDC_HEADER_TYPE: /* maybe check version */
break; /* for now we ignore it */
case USB_CDC_ACM_TYPE:
ac_management_function = buffer[3];
break;
case USB_CDC_CALL_MANAGEMENT_TYPE:
call_management_function = buffer[3];
call_interface_num = buffer[4];
if ((call_management_function & 3) != 3)
err("This device cannot do calls on its own. It is no modem.");
break;
default:
err("Ignoring extra header, type %d, length %d", buffer[2], buffer[0]);
break;
}
next_desc:
buflen -= buffer[0];
buffer += buffer[0];
}
if (!union_header) {
if (call_interface_num > 0) {
dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
dev_dbg(&intf->dev,"No union descriptor, giving up\n");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
dev_dbg(&intf->dev,"no interfaces\n");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
skip_normal_probe:
/*workaround for switched interfaces */
if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
t = control_interface;
control_interface = data_interface;
data_interface = t;
} else {
return -EINVAL;
}
}
/* Accept probe requests only for the control interface */
if (intf != control_interface)
return -ENODEV;
if (usb_interface_claimed(data_interface)) { /* valid in this context */
dev_dbg(&intf->dev,"The data interface isn't available\n");
return -EBUSY;
}
if (data_interface->cur_altsetting->desc.bNumEndpoints < 2)
return -EINVAL;
epctrl = &control_interface->cur_altsetting->endpoint[0].desc;
epread = &data_interface->cur_altsetting->endpoint[0].desc;
epwrite = &data_interface->cur_altsetting->endpoint[1].desc;
/* workaround for switched endpoints */
if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
t = epread;
epread = epwrite;
epwrite = t;
}
dbg("interfaces are valid");
for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
if (minor == ACM_TTY_MINORS) {
err("no more free acm devices");
return -ENODEV;
}
if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2);
acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize);
acm->control = control_interface;
acm->data = data_interface;
acm->minor = minor;
acm->dev = usb_dev;
acm->ctrl_caps = ac_management_function;
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
acm->urb_task.func = acm_rx_tasklet;
acm->urb_task.data = (unsigned long) acm;
INIT_WORK(&acm->work, acm_softint);
spin_lock_init(&acm->throttle_lock);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->write_ready = 1;
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
goto alloc_fail7;
}
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
rcv->instance = acm;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_rb *buf = &(acm->rb[i]);
if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
goto alloc_fail7;
}
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
goto alloc_fail7;
}
usb_set_intfdata (intf, acm);
i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
if (i < 0)
goto alloc_fail8;
if (cfd) { /* export the country data */
acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
if (!acm->country_codes)
goto skip_countries;
acm->country_code_size = cfd->bLength - 4;
memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
acm->country_rel_date = cfd->iCountryCodeRelDate;
i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
if (i < 0) {
kfree(acm->country_codes);
goto skip_countries;
}
i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
if (i < 0) {
kfree(acm->country_codes);
goto skip_countries;
}
}
skip_countries:
usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
usb_fill_bulk_urb(acm->writeurb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
NULL, acm->writesize, acm_write_bulk, acm);
acm->writeurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP;
dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor);
acm_set_control(acm, acm->ctrlout);
acm->line.dwDTERate = cpu_to_le32(9600);
acm->line.bDataBits = 8;
acm_set_line(acm, &acm->line);
usb_driver_claim_interface(&acm_driver, data_interface, acm);
usb_get_intf(control_interface);
tty_register_device(acm_tty_driver, minor, &control_interface->dev);
acm_table[minor] = acm;
return 0;
alloc_fail8:
usb_free_urb(acm->writeurb);
alloc_fail7:
for (i = 0; i < num_rx_buf; i++)
usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
for (i = 0; i < num_rx_buf; i++)
usb_free_urb(acm->ru[i].urb);
usb_free_urb(acm->ctrlurb);
alloc_fail5:
acm_write_buffers_free(acm);
alloc_fail4:
usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
alloc_fail2:
kfree(acm);
alloc_fail:
return -ENOMEM;
}
/* handles CDC Ethernet and many other network "bulk data" interfaces */
int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
{
int tmp;
struct usb_host_interface *alt = NULL;
struct usb_host_endpoint *in = NULL, *out = NULL;
struct usb_host_endpoint *status = NULL;
for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
unsigned ep;
in = out = status = NULL;
alt = intf->altsetting + tmp;
/* take the first altsetting with in-bulk + out-bulk;
* remember any status endpoint, just in case;
* ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
int intr = 0;
e = alt->endpoint + ep;
switch (e->desc.bmAttributes) {
case USB_ENDPOINT_XFER_INT:
if (!usb_endpoint_dir_in(&e->desc))
continue;
intr = 1;
/* FALLTHROUGH */
case USB_ENDPOINT_XFER_BULK:
break;
default:
continue;
}
if (usb_endpoint_dir_in(&e->desc)) {
if (!intr && !in)
in = e;
else if (intr && !status)
status = e;
} else {
if (!out)
out = e;
}
}
if (in && out)
break;
}
if (!alt || !in || !out)
return -EINVAL;
if (alt->desc.bAlternateSetting != 0 ||
!(dev->driver_info->flags & FLAG_NO_SETINT)) {
tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
if (tmp < 0)
return tmp;
}
dev->in = usb_rcvbulkpipe (dev->udev,
in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
dev->out = usb_sndbulkpipe (dev->udev,
out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
dev->status = status;
return 0;
}
static ssize_t skel_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos)
{
struct usb_skel *dev;
int retval = 0;
struct urb *urb = NULL;
char *buf = NULL;
size_t writesize = min(count, (size_t)MAX_TRANSFER);
dev = (struct usb_skel *)file->private_data;
/* verify that we actually have some data to write */
if (count == 0)
goto exit;
/* limit the number of URBs in flight to stop a user from using up all RAM */
if (down_interruptible(&dev->limit_sem)) {
retval = -ERESTARTSYS;
goto exit;
}
spin_lock_irq(&dev->err_lock);
if ((retval = dev->errors) < 0) {
/* any error is reported once */
dev->errors = 0;
/* to preserve notifications about reset */
retval = (retval == -EPIPE) ? retval : -EIO;
}
spin_unlock_irq(&dev->err_lock);
if (retval < 0)
goto error;
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
retval = -ENOMEM;
goto error;
}
buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, &urb->transfer_dma);
if (!buf) {
retval = -ENOMEM;
goto error;
}
if (copy_from_user(buf, user_buffer, writesize)) {
retval = -EFAULT;
goto error;
}
/* this lock makes sure we don't submit URBs to gone devices */
mutex_lock(&dev->io_mutex);
if (!dev->interface) { /* disconnect() was called */
mutex_unlock(&dev->io_mutex);
retval = -ENODEV;
goto error;
}
/* initialize the urb properly */
usb_fill_bulk_urb(urb, dev->udev,
usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
buf, writesize, skel_write_bulk_callback, dev);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_anchor_urb(urb, &dev->submitted);
/* send the data out the bulk port */
retval = usb_submit_urb(urb, GFP_KERNEL);
mutex_unlock(&dev->io_mutex);
if (retval) {
err("%s - failed submitting write urb, error %d", __func__, retval);
goto error_unanchor;
}
/* release our reference to this urb, the USB core will eventually free it entirely */
usb_free_urb(urb);
return writesize;
error_unanchor:
usb_unanchor_urb(urb);
error:
if (urb) {
usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma);
usb_free_urb(urb);
}
up(&dev->limit_sem);
exit:
return retval;
}
static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count)
{
struct usb_serial *serial = port->serial;
struct urb *urb;
const unsigned char *current_position = buf;
unsigned long flags;
int status;
int i;
int bytes_sent = 0;
int transfer_size;
dbg("%s - port %d", __FUNCTION__, port->number);
while (count > 0) {
/* try to find a free urb in our list of them */
urb = NULL;
spin_lock_irqsave (&write_urb_pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
if (write_urb_pool[i]->status != -EINPROGRESS) {
urb = write_urb_pool[i];
break;
}
}
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
if (urb == NULL) {
dbg("%s - no more free urbs", __FUNCTION__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
dev_err(&port->dev, "%s no more kernel memory...\n", __FUNCTION__);
goto exit;
}
}
transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
memcpy (urb->transfer_buffer, current_position, transfer_size);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, urb->transfer_buffer);
/* build up our urb */
usb_fill_bulk_urb (
urb,
serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress),
urb->transfer_buffer,
transfer_size,
empeg_write_bulk_callback,
port);
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status);
bytes_sent = status;
break;
}
current_position += transfer_size;
bytes_sent += transfer_size;
count -= transfer_size;
bytes_out += transfer_size;
}
exit:
return bytes_sent;
}
static int init_card(struct snd_usb_caiaqdev *dev)
{
char *c;
struct usb_device *usb_dev = dev->chip.dev;
struct snd_card *card = dev->chip.card;
int err, len;
if (usb_set_interface(usb_dev, 0, 1) != 0) {
log("can't set alt interface.\n");
return -EIO;
}
usb_init_urb(&dev->ep1_in_urb);
usb_init_urb(&dev->midi_out_urb);
usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
usb_rcvbulkpipe(usb_dev, 0x1),
dev->ep1_in_buf, EP1_BUFSIZE,
usb_ep1_command_reply_dispatch, dev);
usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
usb_sndbulkpipe(usb_dev, 0x1),
dev->midi_out_buf, EP1_BUFSIZE,
snd_usb_caiaq_midi_output_done, dev);
init_waitqueue_head(&dev->ep1_wait_queue);
init_waitqueue_head(&dev->prepare_wait_queue);
if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
return -EIO;
err = send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
if (err)
return err;
if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ))
return -ENODEV;
usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
dev->vendor_name, CAIAQ_USB_STR_LEN);
usb_string(usb_dev, usb_dev->descriptor.iProduct,
dev->product_name, CAIAQ_USB_STR_LEN);
usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
dev->serial, CAIAQ_USB_STR_LEN);
/* terminate serial string at first white space occurence */
c = strchr(dev->serial, ' ');
if (c)
*c = '\0';
strcpy(card->driver, MODNAME);
strcpy(card->shortname, dev->product_name);
len = snprintf(card->longname, sizeof(card->longname),
"%s %s (serial %s, ",
dev->vendor_name, dev->product_name, dev->serial);
if (len < sizeof(card->longname) - 2)
len += usb_make_path(usb_dev, card->longname + len,
sizeof(card->longname) - len);
card->longname[len++] = ')';
card->longname[len] = '\0';
setup_card(dev);
return 0;
}
/**
* hdm_enqueue - receive a buffer to be used for data transfer
* @iface: interface to enqueue to
* @channel: ID of the channel
* @mbo: pointer to the buffer object
*
* This allocates a new URB and fills it according to the channel
* that is being used for transmission of data. Before the URB is
* submitted it is stored in the private anchor list.
*
* Returns 0 on success. On any error the URB is freed and a error code
* is returned.
*
* Context: Could in _some_ cases be interrupt!
*/
static int hdm_enqueue(struct most_interface *iface, int channel,
struct mbo *mbo)
{
struct most_dev *mdev;
struct most_channel_config *conf;
struct device *dev;
int retval = 0;
struct urb *urb;
unsigned long length;
void *virt_address;
if (unlikely(!iface || !mbo))
return -EIO;
if (unlikely(iface->num_channels <= channel || channel < 0))
return -ECHRNG;
mdev = to_mdev(iface);
conf = &mdev->conf[channel];
dev = &mdev->usb_device->dev;
if (!mdev->usb_device)
return -ENODEV;
urb = usb_alloc_urb(NO_ISOCHRONOUS_URB, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
if ((conf->direction & MOST_CH_TX) && mdev->padding_active[channel] &&
hdm_add_padding(mdev, channel, mbo)) {
retval = -EIO;
goto _error;
}
urb->transfer_dma = mbo->bus_address;
virt_address = mbo->virt_address;
length = mbo->buffer_length;
if (conf->direction & MOST_CH_TX) {
usb_fill_bulk_urb(urb, mdev->usb_device,
usb_sndbulkpipe(mdev->usb_device,
mdev->ep_address[channel]),
virt_address,
length,
hdm_write_completion,
mbo);
if (conf->data_type != MOST_CH_ISOC)
urb->transfer_flags |= URB_ZERO_PACKET;
} else {
usb_fill_bulk_urb(urb, mdev->usb_device,
usb_rcvbulkpipe(mdev->usb_device,
mdev->ep_address[channel]),
virt_address,
length + conf->extra_len,
hdm_read_completion,
mbo);
}
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_anchor_urb(urb, &mdev->busy_urbs[channel]);
retval = usb_submit_urb(urb, GFP_KERNEL);
if (retval) {
dev_err(dev, "URB submit failed with error %d.\n", retval);
goto _error_1;
}
return 0;
_error_1:
usb_unanchor_urb(urb);
_error:
usb_free_urb(urb);
return retval;
}
static int whiteheat_attach(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
struct whiteheat_hw_info *hw_info;
int pipe;
int ret;
int alen;
__u8 *command;
__u8 *result;
command_port = serial->port[COMMAND_PORT];
pipe = usb_sndbulkpipe(serial->dev,
command_port->bulk_out_endpointAddress);
command = kmalloc(2, GFP_KERNEL);
if (!command)
goto no_command_buffer;
command[0] = WHITEHEAT_GET_HW_INFO;
command[1] = 0;
result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
if (!result)
goto no_result_buffer;
/*
* When the module is reloaded the firmware is still there and
* the endpoints are still in the usb core unchanged. This is the
* unlinking bug in disguise. Same for the call below.
*/
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg(serial->dev, pipe, command, 2,
&alen, COMMAND_TIMEOUT_MS);
if (ret) {
dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
serial->type->description, ret);
goto no_firmware;
} else if (alen != 2) {
dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
serial->type->description, alen);
goto no_firmware;
}
pipe = usb_rcvbulkpipe(serial->dev,
command_port->bulk_in_endpointAddress);
/* See the comment on the usb_clear_halt() above */
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg(serial->dev, pipe, result,
sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(*hw_info) + 1) {
dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
serial->type->description, result[0]);
goto no_firmware;
}
hw_info = (struct whiteheat_hw_info *)&result[1];
dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
serial->type->description,
hw_info->sw_major_rev, hw_info->sw_minor_rev);
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
dev_err(&serial->dev->dev,
"%s: Out of memory for port structures\n",
serial->type->description);
goto no_command_private;
}
mutex_init(&command_info->mutex);
command_info->port_running = 0;
init_waitqueue_head(&command_info->wait_command);
usb_set_serial_port_data(command_port, command_info);
command_port->write_urb->complete = command_port_write_callback;
command_port->read_urb->complete = command_port_read_callback;
kfree(result);
kfree(command);
return 0;
no_firmware:
/* Firmware likely not running */
dev_err(&serial->dev->dev,
"%s: Unable to retrieve firmware version, try replugging\n",
serial->type->description);
dev_err(&serial->dev->dev,
"%s: If the firmware is not running (status led not blinking)\n",
serial->type->description);
dev_err(&serial->dev->dev,
"%s: please contact [email protected]\n",
serial->type->description);
kfree(result);
kfree(command);
return -ENODEV;
no_command_private:
kfree(result);
no_result_buffer:
kfree(command);
no_command_buffer:
return -ENOMEM;
}
static int sddr55_raw_bulk(struct us_data *us,
int direction,
unsigned char *data,
unsigned int len) {
int result;
int act_len;
int pipe;
if (direction == SCSI_DATA_READ)
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
else
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
result = usb_stor_bulk_msg(us, data, pipe, len, &act_len);
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("EPIPE: clearing endpoint halt for"
" pipe 0x%x, stalled at %d bytes\n",
pipe, act_len);
usb_clear_halt(us->pusb_dev, pipe);
}
if (result) {
/* NAK - that means we've retried a few times already */
if (result == -ETIMEDOUT) {
US_DEBUGP("usbat_raw_bulk():"
" device NAKed\n");
return US_BULK_TRANSFER_FAILED;
}
/* -ENOENT -- we canceled this transfer */
if (result == -ENOENT) {
US_DEBUGP("usbat_raw_bulk():"
" transfer aborted\n");
return US_BULK_TRANSFER_ABORTED;
}
if (result == -EPIPE) {
US_DEBUGP("usbat_raw_bulk():"
" output pipe stalled\n");
return US_BULK_TRANSFER_FAILED;
}
/* the catch-all case */
US_DEBUGP("us_transfer_partial(): unknown error\n");
return US_BULK_TRANSFER_FAILED;
}
if (act_len != len) {
US_DEBUGP("Warning: Transferred only %d bytes\n",
act_len);
return US_BULK_TRANSFER_SHORT;
}
US_DEBUGP("Transferred %d of %d bytes\n", act_len, len);
return US_BULK_TRANSFER_GOOD;
}
/*
* Synchronous write to the device
*
* Takes care of updating EDC counts and thus, handle device errors.
*/
static
ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size)
{
int result;
struct device *dev = &i2400mu->usb_iface->dev;
int len;
struct usb_endpoint_descriptor *epd;
int pipe, do_autopm = 1;
result = usb_autopm_get_interface(i2400mu->usb_iface);
if (result < 0) {
dev_err(dev, "BM-CMD: can't get autopm: %d\n", result);
do_autopm = 0;
}
epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out);
pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
retry:
result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, 200);
switch (result) {
case 0:
if (len != buf_size) {
dev_err(dev, "BM-CMD: short write (%u B vs %zu "
"expected)\n", len, buf_size);
result = -EIO;
break;
}
result = len;
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "BM-CMD: too many stalls in "
"URB; resetting device\n");
usb_queue_reset_device(i2400mu->usb_iface);
/* fallthrough */
} else {
usb_clear_halt(i2400mu->usb_dev, pipe);
msleep(10); /* give the device some time */
goto retry;
}
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
case -ESHUTDOWN: /* and exit */
case -ECONNRESET:
result = -ESHUTDOWN;
break;
case -ETIMEDOUT: /* bah... */
break;
default: /* any other? */
if (edc_inc(&i2400mu->urb_edc,
EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "BM-CMD: maximum errors in "
"URB exceeded; resetting device\n");
usb_queue_reset_device(i2400mu->usb_iface);
result = -ENODEV;
break;
}
dev_err(dev, "BM-CMD: URB error %d, retrying\n",
result);
goto retry;
}
if (do_autopm)
usb_autopm_put_interface(i2400mu->usb_iface);
return result;
}
static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
const struct firmware *fw1,
const struct firmware *fw2)
{
unsigned char *buffer;
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
int actual_length;
int ret = 0;
int offset;
usb_dbg(usbatm, "%s entered\n", __func__);
if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
ret = -ENOMEM;
usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
goto out;
}
if (!usb_ifnum_to_if(usb_dev, 2)) {
ret = -ENODEV;
usb_dbg(usbatm, "%s: interface not found!\n", __func__);
goto out_free;
}
/* URB 7 */
if (dl_512_first) { /* some modems need a read before writing the firmware */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, 2000);
if (ret < 0 && ret != -ETIMEDOUT)
usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
else
usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
}
/* URB 8 : both leds are static green */
for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
memcpy(buffer, fw1->data + offset, thislen);
ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
}
/* USB led blinking green, ADSL led off */
/* URB 11 */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
/* URBs 12 to 139 - USB led blinking green, ADSL led off */
for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
memcpy(buffer, fw2->data + offset, thislen);
ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
}
usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
/* USB led static green, ADSL led static red */
/* URB 142 */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
/* success */
usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
/* Delay to allow firmware to start up. We can do this here
because we're in our own kernel thread anyway. */
msleep_interruptible(1000);
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret);
goto out_free;
}
/* Enable software buffering, if requested */
if (sw_buffering)
speedtch_set_swbuff(instance, 1);
/* Magic spell; don't ask us what this does */
speedtch_test_sequence(instance);
ret = 0;
out_free:
free_page((unsigned long)buffer);
out:
return ret;
}
s32 rtl8188eu_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt)
{
#ifdef PLATFORM_LINUX
u16 fc;
int rc, len, pipe;
unsigned int bmcst, tid, qsel;
struct sk_buff *skb, *pxmit_skb;
struct urb *urb;
unsigned char *pxmitbuf;
struct tx_desc *ptxdesc;
struct rtw_ieee80211_hdr *tx_hdr;
struct hostapd_priv *phostapdpriv = padapter->phostapdpriv;
struct net_device *pnetdev = padapter->pnetdev;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter);
//DBG_8192C("%s\n", __FUNCTION__);
skb = pkt;
len = skb->len;
tx_hdr = (struct rtw_ieee80211_hdr *)(skb->data);
fc = le16_to_cpu(tx_hdr->frame_ctl);
bmcst = IS_MCAST(tx_hdr->addr1);
if ((fc & RTW_IEEE80211_FCTL_FTYPE) != RTW_IEEE80211_FTYPE_MGMT)
goto _exit;
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) // http://www.mail-archive.com/[email protected]/msg17214.html
pxmit_skb = dev_alloc_skb(len + TXDESC_SIZE);
#else
pxmit_skb = netdev_alloc_skb(pnetdev, len + TXDESC_SIZE);
#endif
if(!pxmit_skb)
goto _exit;
pxmitbuf = pxmit_skb->data;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
goto _exit;
}
// ----- fill tx desc -----
ptxdesc = (struct tx_desc *)pxmitbuf;
_rtw_memset(ptxdesc, 0, sizeof(*ptxdesc));
//offset 0
ptxdesc->txdw0 |= cpu_to_le32(len&0x0000ffff);
ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000);//default = 32 bytes for TX Desc
ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
if(bmcst)
{
ptxdesc->txdw0 |= cpu_to_le32(BIT(24));
}
//offset 4
ptxdesc->txdw1 |= cpu_to_le32(0x00);//MAC_ID
ptxdesc->txdw1 |= cpu_to_le32((0x12<<QSEL_SHT)&0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((0x06<< 16) & 0x000f0000);//b mode
//offset 8
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((le16_to_cpu(tx_hdr->seq_ctl)<<16)&0xffff0000);
//offset 16
ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
//offset 20
//HW append seq
ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
rtl8188eu_cal_txdesc_chksum(ptxdesc);
// ----- end of fill tx desc -----
//
skb_put(pxmit_skb, len + TXDESC_SIZE);
pxmitbuf = pxmitbuf + TXDESC_SIZE;
_rtw_memcpy(pxmitbuf, skb->data, len);
//DBG_8192C("mgnt_xmit, len=%x\n", pxmit_skb->len);
// ----- prepare urb for submit -----
//translate DMA FIFO addr to pipehandle
//pipe = ffaddr2pipehdl(pdvobj, MGT_QUEUE_INX);
pipe = usb_sndbulkpipe(pdvobj->pusbdev, pHalData->Queue2EPNum[(u8)MGT_QUEUE_INX]&0x0f);
usb_fill_bulk_urb(urb, pdvobj->pusbdev, pipe,
pxmit_skb->data, pxmit_skb->len, rtl8192cu_hostap_mgnt_xmit_cb, pxmit_skb);
urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(urb, &phostapdpriv->anchored);
rc = usb_submit_urb(urb, GFP_ATOMIC);
if (rc < 0) {
usb_unanchor_urb(urb);
kfree_skb(skb);
}
usb_free_urb(urb);
_exit:
dev_kfree_skb_any(skb);
#endif
return 0;
}
int usb_stor_Bulk_transport(Scsi_Cmnd *srb, struct us_data *us)
{
struct bulk_cb_wrap *bcb;
struct bulk_cs_wrap *bcs;
int result;
int pipe;
int partial;
int ret = USB_STOR_TRANSPORT_ERROR;
bcb = kmalloc(sizeof *bcb, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
if (!bcb) {
return USB_STOR_TRANSPORT_ERROR;
}
bcs = kmalloc(sizeof *bcs, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
if (!bcs) {
kfree(bcb);
return USB_STOR_TRANSPORT_ERROR;
}
/* set up the command wrapper */
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = cpu_to_le32(usb_stor_transfer_length(srb));
bcb->Flags = srb->sc_data_direction == SCSI_DATA_READ ? 1 << 7 : 0;
bcb->Tag = ++(us->tag);
bcb->Lun = srb->cmnd[1] >> 5;
if (us->flags & US_FL_SCM_MULT_TARG)
bcb->Lun |= srb->target << 4;
bcb->Length = srb->cmd_len;
/* construct the pipe handle */
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
/* copy the command payload */
memset(bcb->CDB, 0, sizeof(bcb->CDB));
memcpy(bcb->CDB, srb->cmnd, bcb->Length);
/* send it to out endpoint */
US_DEBUGP("Bulk command S 0x%x T 0x%x Trg %d LUN %d L %d F %d CL %d\n",
le32_to_cpu(bcb->Signature), bcb->Tag,
(bcb->Lun >> 4), (bcb->Lun & 0x0F),
le32_to_cpu(bcb->DataTransferLength), bcb->Flags, bcb->Length);
result = usb_stor_bulk_msg(us, bcb, pipe, US_BULK_CB_WRAP_LEN,
&partial);
US_DEBUGP("Bulk command transfer result=%d\n", result);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
result = usb_stor_clear_halt(us, pipe);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
result = -EPIPE;
} else if (result) {
/* unknown error -- we've got a problem */
ret = USB_STOR_TRANSPORT_ERROR;
goto out;
}
/* if the command transfered well, then we go to the data stage */
if (result == 0) {
/* send/receive data payload, if there is any */
if (bcb->DataTransferLength) {
usb_stor_transfer(srb, us);
result = srb->result;
US_DEBUGP("Bulk data transfer result 0x%x\n", result);
/* if it was aborted, we need to indicate that */
if (result == US_BULK_TRANSFER_ABORTED) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
}
}
/* See flow chart on pg 15 of the Bulk Only Transport spec for
* an explanation of how this code works.
*/
/* construct the pipe handle */
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
/* get CSW for device status */
US_DEBUGP("Attempting to get CSW...\n");
result = usb_stor_bulk_msg(us, bcs, pipe, US_BULK_CS_WRAP_LEN,
&partial);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
/* did the attempt to read the CSW fail? */
if (result == -EPIPE) {
US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
result = usb_stor_clear_halt(us, pipe);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
/* get the status again */
US_DEBUGP("Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_msg(us, bcs, pipe,
US_BULK_CS_WRAP_LEN, &partial);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
goto out;
}
/* if it fails again, we need a reset and return an error*/
if (result == -EPIPE) {
US_DEBUGP("clearing halt for pipe 0x%x\n", pipe);
result = usb_stor_clear_halt(us, pipe);
/* if the command was aborted, indicate that */
if (result == -ECONNRESET) {
ret = USB_STOR_TRANSPORT_ABORTED;
} else {
ret = USB_STOR_TRANSPORT_ERROR;
}
goto out;
}
}
/* if we still have a failure at this point, we're in trouble */
US_DEBUGP("Bulk status result = %d\n", result);
if (result) {
ret = USB_STOR_TRANSPORT_ERROR;
goto out;
}
/* check bulk status */
US_DEBUGP("Bulk status Sig 0x%x T 0x%x R %d Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
bcs->Residue, bcs->Status);
if ((bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN) && bcs->Signature != cpu_to_le32(US_BULK_CS_OLYMPUS_SIGN)) ||
bcs->Tag != bcb->Tag ||
bcs->Status > US_BULK_STAT_PHASE || partial != 13) {
US_DEBUGP("Bulk logical error\n");
ret = USB_STOR_TRANSPORT_ERROR;
goto out;
}
/* based on the status code, we report good or bad */
switch (bcs->Status) {
case US_BULK_STAT_OK:
/* command good -- note that data could be short */
ret = USB_STOR_TRANSPORT_GOOD;
goto out;
case US_BULK_STAT_FAIL:
/* command failed */
ret = USB_STOR_TRANSPORT_FAILED;
goto out;
case US_BULK_STAT_PHASE:
/* phase error -- note that a transport reset will be
* invoked by the invoke_transport() function
*/
ret = USB_STOR_TRANSPORT_ERROR;
goto out;
}
/* we should never get here, but if we do, we're in trouble */
out:
kfree(bcb);
kfree(bcs);
return ret;
}
static void ir_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct urb *urb;
unsigned char *transfer_buffer;
int result;
speed_t baud;
int ir_baud;
dbg("%s - port %d", __func__, port->number);
baud = tty_get_baud_rate(tty);
/*
* FIXME, we should compare the baud request against the
* capability stated in the IR header that we got in the
* startup function.
*/
switch (baud) {
case 2400:
ir_baud = USB_IRDA_BR_2400;
break;
case 9600:
ir_baud = USB_IRDA_BR_9600;
break;
case 19200:
ir_baud = USB_IRDA_BR_19200;
break;
case 38400:
ir_baud = USB_IRDA_BR_38400;
break;
case 57600:
ir_baud = USB_IRDA_BR_57600;
break;
case 115200:
ir_baud = USB_IRDA_BR_115200;
break;
case 576000:
ir_baud = USB_IRDA_BR_576000;
break;
case 1152000:
ir_baud = USB_IRDA_BR_1152000;
break;
case 4000000:
ir_baud = USB_IRDA_BR_4000000;
break;
default:
ir_baud = USB_IRDA_BR_9600;
baud = 9600;
}
if (xbof == -1)
ir_xbof = ir_xbof_change(ir_add_bof);
else
ir_xbof = ir_xbof_change(xbof) ;
/* Only speed changes are supported */
tty_termios_copy_hw(tty->termios, old_termios);
tty_encode_baud_rate(tty, baud, baud);
/*
* send the baud change out on an "empty" data packet
*/
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
dev_err(&port->dev, "%s - no more urbs\n", __func__);
return;
}
transfer_buffer = kmalloc(1, GFP_KERNEL);
if (!transfer_buffer) {
dev_err(&port->dev, "%s - out of memory\n", __func__);
goto err_buf;
}
*transfer_buffer = ir_xbof | ir_baud;
usb_fill_bulk_urb(
urb,
port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
transfer_buffer,
1,
ir_set_termios_callback,
port);
urb->transfer_flags = URB_ZERO_PACKET;
result = usb_submit_urb(urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed to submit urb: %d\n",
__func__, result);
goto err_subm;
}
usb_free_urb(urb);
return;
err_subm:
kfree(transfer_buffer);
err_buf:
usb_free_urb(urb);
}
static ssize_t camera_write (struct file *file,
const char *buf, size_t len, loff_t *ppos)
{
struct camera_state *camera;
ssize_t bytes_written = 0;
if (len > MAX_PACKET_SIZE)
return -EINVAL;
camera = (struct camera_state *) file->private_data;
down (&camera->sem);
if (!camera->dev) {
up (&camera->sem);
return -ENODEV;
}
/* most writes will be small: simple commands, sometimes with
* parameters. putting images (like borders) into the camera
* would be the main use of big writes.
*/
while (len > 0) {
char *obuf = camera->buf;
int maxretry = MAX_WRITE_RETRY;
unsigned long copy_size, thistime;
/* it's not clear that retrying can do any good ... or that
* fragmenting application packets into N writes is correct.
*/
thistime = copy_size = len;
if (copy_from_user (obuf, buf, copy_size)) {
bytes_written = -EFAULT;
break;
}
while (thistime) {
int result;
int count;
if (signal_pending (current)) {
if (!bytes_written)
bytes_written = -EINTR;
goto done;
}
result = usb_bulk_msg (camera->dev,
usb_sndbulkpipe (camera->dev, camera->outEP),
obuf, thistime, &count, HZ*10);
if (result)
dbg ("write USB err - %d", result);
if (count) {
obuf += count;
thistime -= count;
maxretry = MAX_WRITE_RETRY;
continue;
} else if (!result)
break;
if (result == -ETIMEDOUT) { /* NAK - delay a bit */
if (!maxretry--) {
if (!bytes_written)
bytes_written = -ETIME;
goto done;
}
interruptible_sleep_on_timeout (&camera->wait,
RETRY_TIMEOUT);
continue;
}
if (!bytes_written)
bytes_written = -EIO;
goto done;
}
bytes_written += copy_size;
len -= copy_size;
buf += copy_size;
}
done:
up (&camera->sem);
dbg ("wrote %Zd", bytes_written);
return bytes_written;
}
int
usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
{
struct usbnet *dev;
struct net_device *net;
struct usb_host_interface *interface;
struct driver_info *info;
struct usb_device *xdev;
int status;
const char *name;
name = udev->dev.driver->name;
info = (struct driver_info *) prod->driver_info;
if (!info) {
dev_dbg (&udev->dev, "blacklisted by %s\n", name);
return -ENODEV;
}
xdev = interface_to_usbdev (udev);
interface = udev->cur_altsetting;
usb_get_dev (xdev);
status = -ENOMEM;
// set up our own records
net = alloc_etherdev(sizeof(*dev));
if (!net) {
dbg ("can't kmalloc dev");
goto out;
}
dev = netdev_priv(net);
dev->udev = xdev;
dev->intf = udev;
dev->driver_info = info;
dev->driver_name = name;
dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
skb_queue_head_init (&dev->rxq);
skb_queue_head_init (&dev->txq);
skb_queue_head_init (&dev->done);
skb_queue_head_init(&dev->rxq_pause);
dev->bh.func = usbnet_bh;
dev->bh.data = (unsigned long) dev;
INIT_WORK (&dev->kevent, kevent);
dev->delay.function = usbnet_bh;
dev->delay.data = (unsigned long) dev;
init_timer (&dev->delay);
mutex_init (&dev->phy_mutex);
dev->net = net;
strcpy (net->name, "usb%d");
memcpy (net->dev_addr, node_id, sizeof node_id);
/* rx and tx sides can use different message sizes;
* bind() should set rx_urb_size in that case.
*/
dev->hard_mtu = net->mtu + net->hard_header_len;
#if 0
// dma_supported() is deeply broken on almost all architectures
// possible with some EHCI controllers
if (dma_supported (&udev->dev, DMA_BIT_MASK(64)))
net->features |= NETIF_F_HIGHDMA;
#endif
net->netdev_ops = &usbnet_netdev_ops;
net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
net->ethtool_ops = &usbnet_ethtool_ops;
// allow device-specific bind/init procedures
// NOTE net->name still not usable ...
if (info->bind) {
status = info->bind (dev, udev);
if (status < 0)
goto out1;
// heuristic: "usb%d" for links we know are two-host,
// else "eth%d" when there's reasonable doubt. userspace
// can rename the link if it knows better.
if ((dev->driver_info->flags & FLAG_ETHER) != 0
&& (net->dev_addr [0] & 0x02) == 0)
strcpy (net->name, "eth%d");
/* WLAN devices should always be named "wlan%d" */
if ((dev->driver_info->flags & FLAG_WLAN) != 0)
strcpy(net->name, "wlan%d");
/* maybe the remote can't receive an Ethernet MTU */
if (net->mtu > (dev->hard_mtu - net->hard_header_len))
net->mtu = dev->hard_mtu - net->hard_header_len;
} else if (!info->in || !info->out)
status = usbnet_get_endpoints (dev, udev);
else {
dev->in = usb_rcvbulkpipe (xdev, info->in);
dev->out = usb_sndbulkpipe (xdev, info->out);
if (!(info->flags & FLAG_NO_SETINT))
status = usb_set_interface (xdev,
interface->desc.bInterfaceNumber,
interface->desc.bAlternateSetting);
else
status = 0;
}
if (status >= 0 && dev->status)
status = init_status (dev, udev);
if (status < 0)
goto out3;
if (!dev->rx_urb_size)
dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
SET_NETDEV_DEV(net, &udev->dev);
status = register_netdev (net);
if (status)
goto out3;
if (netif_msg_probe (dev))
devinfo (dev, "register '%s' at usb-%s-%s, %s, %pM",
udev->dev.driver->name,
xdev->bus->bus_name, xdev->devpath,
dev->driver_info->description,
net->dev_addr);
// ok, it's ready to go.
usb_set_intfdata (udev, dev);
// start as if the link is up
netif_device_attach (net);
return 0;
out3:
if (info->unbind)
info->unbind (dev, udev);
out1:
free_netdev(net);
out:
usb_put_dev(xdev);
return status;
}
/*
* Callback to search the Mustek MDC800 on the USB Bus
*/
static int mdc800_usb_probe (struct usb_interface *intf,
const struct usb_device_id *id)
{
int i,j;
struct usb_host_interface *intf_desc;
struct usb_device *dev = interface_to_usbdev (intf);
int irq_interval=0;
int retval;
dbg ("(mdc800_usb_probe) called.");
if (mdc800->dev != 0)
{
warn ("only one Mustek MDC800 is supported.");
return -ENODEV;
}
if (dev->descriptor.bNumConfigurations != 1)
{
err ("probe fails -> wrong Number of Configuration");
return -ENODEV;
}
intf_desc = intf->cur_altsetting;
if (
( intf_desc->desc.bInterfaceClass != 0xff )
|| ( intf_desc->desc.bInterfaceSubClass != 0 )
|| ( intf_desc->desc.bInterfaceProtocol != 0 )
|| ( intf_desc->desc.bNumEndpoints != 4)
)
{
err ("probe fails -> wrong Interface");
return -ENODEV;
}
/* Check the Endpoints */
for (i=0; i<4; i++)
{
mdc800->endpoint[i]=-1;
for (j=0; j<4; j++)
{
if (mdc800_endpoint_equals (&intf_desc->endpoint [j].desc,&mdc800_ed [i]))
{
mdc800->endpoint[i]=intf_desc->endpoint [j].desc.bEndpointAddress ;
if (i==1)
{
irq_interval=intf_desc->endpoint [j].desc.bInterval;
}
continue;
}
}
if (mdc800->endpoint[i] == -1)
{
err ("probe fails -> Wrong Endpoints.");
return -ENODEV;
}
}
info ("Found Mustek MDC800 on USB.");
down (&mdc800->io_lock);
retval = usb_register_dev(intf, &mdc800_class);
if (retval) {
err ("Not able to get a minor for this device.");
return -ENODEV;
}
mdc800->dev=dev;
mdc800->open=0;
/* Setup URB Structs */
usb_fill_int_urb (
mdc800->irq_urb,
mdc800->dev,
usb_rcvintpipe (mdc800->dev,mdc800->endpoint [1]),
mdc800->irq_urb_buffer,
8,
mdc800_usb_irq,
mdc800,
irq_interval
);
usb_fill_bulk_urb (
mdc800->write_urb,
mdc800->dev,
usb_sndbulkpipe (mdc800->dev, mdc800->endpoint[0]),
mdc800->write_urb_buffer,
8,
mdc800_usb_write_notify,
mdc800
);
usb_fill_bulk_urb (
mdc800->download_urb,
mdc800->dev,
usb_rcvbulkpipe (mdc800->dev, mdc800->endpoint [3]),
mdc800->download_urb_buffer,
64,
mdc800_usb_download_notify,
mdc800
);
mdc800->state=READY;
up (&mdc800->io_lock);
usb_set_intfdata(intf, mdc800);
return 0;
}
int UMAS_BulkTransport(SCSI_CMD_T *srb, UMAS_DATA_T *umas)
{
int result, status = 0;
int pipe;
uint32_t partial;
struct bulk_cb_wrap bcb;
struct bulk_cs_wrap bcs;
/* if the device was removed, then we're already reset */
if(!umas->pusb_dev)
return SUCCESS;
/* set up the command wrapper */
bcb.Signature = UMAS_BULK_CB_SIGN;
bcb.DataTransferLength = usb_stor_transfer_length(srb);
bcb.Flags = srb->sc_data_direction == SCSI_DATA_READ ? 1 << 7 : 0;
bcb.Tag = srb->serial_number;
bcb.Lun = srb->cmnd[1] >> 5;
if(umas->flags & UMAS_FL_SCM_MULT_TARG)
bcb.Lun |= srb->target << 4;
bcb.Length = srb->cmd_len;
/* construct the pipe handle */
pipe = usb_sndbulkpipe(umas->pusb_dev, umas->ep_out);
/* copy the command payload */
memset(bcb.CDB, 0, sizeof(bcb.CDB));
memcpy(bcb.CDB, srb->cmnd, bcb.Length);
/* send it to out endpoint */
UMAS_VDEBUG("Bulk command S 0x%x T 0x%x Trg %d LUN %d L %d F %d CL %d\n",
bcb.Signature, bcb.Tag, (bcb.Lun >> 4), (bcb.Lun & 0x0F),
bcb.DataTransferLength, bcb.Flags, bcb.Length);
result = usb_stor_bulk_msg(umas, &bcb, pipe, UMAS_BULK_CB_WRAP_LEN, &partial);
UMAS_VDEBUG("Bulk command transfer result=%d\n", result);
/* if the command was aborted, indicate that */
if(result == USB_ERR_NOENT)
return USB_STOR_TRANSPORT_ABORTED;
/* if we stall, we need to clear it before we go on */
if(result == USB_ERR_PIPE)
{
UMAS_DEBUG("UMAS_BulkTransport - 1 clearing endpoint halt for pipe 0x%x\n", pipe);
clear_halt(umas->pusb_dev, pipe);
}
else if(result)
{
/* unknown error -- we've got a problem */
status = USB_STOR_TRANSPORT_ERROR;
goto bulk_error;
}
/* if the command transferred well, then we go to the data stage */
if(result == 0)
{
/* send/receive data payload, if there is any */
if(bcb.DataTransferLength)
{
us_transfer(srb, umas);
/* if it was aborted, we need to indicate that */
if(srb->result == USB_STOR_TRANSPORT_ABORTED)
{
status = USB_STOR_TRANSPORT_ABORTED;
goto bulk_error;
}
}
}
/*
* See flow chart on pg 15 of the Bulk Only Transport spec for
* an explanation of how this code works.
*/
/* construct the pipe handle */
pipe = usb_rcvbulkpipe(umas->pusb_dev, umas->ep_in);
/* get CSW for device status */
UMAS_VDEBUG("Attempting to get CSW...\n");
result = usb_stor_bulk_msg(umas, (char *)&bcs, pipe, UMAS_BULK_CS_WRAP_LEN, &partial);
/* if the command was aborted, indicate that */
if(result == USB_ERR_NOENT)
{
status = USB_STOR_TRANSPORT_ABORTED;
goto bulk_error;
}
/* did the attempt to read the CSW fail? */
if(result == USB_ERR_PIPE)
{
UMAS_DEBUG("get CSW failed - clearing endpoint halt for pipe 0x%x\n", pipe);
clear_halt(umas->pusb_dev, pipe);
/* get the status again */
UMAS_DEBUG("Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_msg(umas, &bcs, pipe, UMAS_BULK_CS_WRAP_LEN, &partial);
/* if the command was aborted, indicate that */
if(result == USB_ERR_NOENT)
{
UMAS_DEBUG("get CSW Command was aborted!\n");
status = USB_STOR_TRANSPORT_ABORTED;
goto bulk_error;
}
/* if it fails again, we need a reset and return an error*/
if(result == USB_ERR_PIPE)
{
UMAS_DEBUG("get CSW command 2nd try failed - clearing halt for pipe 0x%x\n", pipe);
clear_halt(umas->pusb_dev, pipe);
status = USB_STOR_TRANSPORT_ERROR;
goto bulk_error;
}
}
/* if we still have a failure at this point, we're in trouble */
UMAS_VDEBUG("Bulk status result = %d\n", result);
if(result)
{
status = USB_STOR_TRANSPORT_ERROR;
goto bulk_error;
}
/* check bulk status */
UMAS_VDEBUG("Bulk status Sig 0x%x T 0x%x R %d Stat 0x%x\n",
USB_SWAP32(bcs.Signature), bcs.Tag, bcs.Residue, bcs.Status);
if((bcs.Signature != UMAS_BULK_CS_SIGN) || (bcs.Tag != bcb.Tag) ||
(bcs.Status > UMAS_BULK_STAT_PHASE) || (partial != 13))
{
UMAS_DEBUG("Bulk status Sig 0x%x T 0x%x R %d Stat 0x%x\n",
USB_SWAP32(bcs.Signature), bcs.Tag, bcs.Residue, bcs.Status);
status = USB_STOR_TRANSPORT_ERROR;
goto bulk_error;
}
/* based on the status code, we report good or bad */
switch(bcs.Status)
{
case UMAS_BULK_STAT_OK:
/* command good -- note that data could be short */
return USB_STOR_TRANSPORT_GOOD;
case UMAS_BULK_STAT_FAIL:
/* command failed */
status = USB_STOR_TRANSPORT_FAILED;
goto bulk_error;
case UMAS_BULK_STAT_PHASE:
/* phase error -- note that a transport reset will be
* invoked by the invoke_transport() function
*/
status = USB_STOR_TRANSPORT_ERROR;
goto bulk_error;
}
/* we should never get here, but if we do, we're in trouble */
bulk_error:
return status;
}
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
int i, error;
for (i = 0; xpad_device[i].idVendor; i++) {
if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
(le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
break;
}
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!xpad || !input_dev) {
error = -ENOMEM;
goto fail1;
}
xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata) {
error = -ENOMEM;
goto fail1;
}
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_in) {
error = -ENOMEM;
goto fail2;
}
xpad->udev = udev;
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
xpad->xtype = XTYPE_XBOX360W;
else
xpad->xtype = XTYPE_XBOX360;
} else
xpad->xtype = XTYPE_XBOX;
if (dpad_to_buttons)
xpad->mapping |= MAP_DPAD_TO_BUTTONS;
if (triggers_to_buttons)
xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
if (sticks_to_null)
xpad->mapping |= MAP_STICKS_TO_NULL;
}
xpad->dev = input_dev;
usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
input_dev->name = xpad_device[i].name;
input_dev->phys = xpad->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, xpad);
input_dev->open = xpad_open;
input_dev->close = xpad_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY);
if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
input_dev->evbit[0] |= BIT_MASK(EV_ABS);
/* */
for (i = 0; xpad_abs[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs[i]);
}
/* */
for (i = 0; xpad_common_btn[i] >= 0; i++)
__set_bit(xpad_common_btn[i], input_dev->keybit);
/* */
if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
for (i = 0; xpad360_btn[i] >= 0; i++)
__set_bit(xpad360_btn[i], input_dev->keybit);
} else {
for (i = 0; xpad_btn[i] >= 0; i++)
__set_bit(xpad_btn[i], input_dev->keybit);
}
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
for (i = 0; xpad_btn_pad[i] >= 0; i++)
__set_bit(xpad_btn_pad[i], input_dev->keybit);
} else {
for (i = 0; xpad_abs_pad[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
}
if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
for (i = 0; xpad_btn_triggers[i] >= 0; i++)
__set_bit(xpad_btn_triggers[i], input_dev->keybit);
} else {
for (i = 0; xpad_abs_triggers[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}
error = xpad_init_output(intf, xpad);
if (error)
goto fail3;
error = xpad_init_ff(xpad);
if (error)
goto fail4;
error = xpad_led_probe(xpad);
if (error)
goto fail5;
ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
xpad, ep_irq_in->bInterval);
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
error = input_register_device(xpad->dev);
if (error)
goto fail6;
usb_set_intfdata(intf, xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
/*
*/
xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->bulk_out) {
error = -ENOMEM;
goto fail7;
}
xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
if (!xpad->bdata) {
error = -ENOMEM;
goto fail8;
}
xpad->bdata[2] = 0x08;
switch (intf->cur_altsetting->desc.bInterfaceNumber) {
case 0:
xpad->bdata[3] = 0x42;
break;
case 2:
xpad->bdata[3] = 0x43;
break;
case 4:
xpad->bdata[3] = 0x44;
break;
case 6:
xpad->bdata[3] = 0x45;
}
ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
usb_fill_bulk_urb(xpad->bulk_out, udev,
usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
/*
*/
xpad->irq_in->dev = xpad->udev;
error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
if (error)
goto fail9;
}
return 0;
fail9: kfree(xpad->bdata);
fail8: usb_free_urb(xpad->bulk_out);
fail7: input_unregister_device(input_dev);
input_dev = NULL;
fail6: xpad_led_disconnect(xpad);
fail5: if (input_dev)
input_ff_destroy(input_dev);
fail4: xpad_deinit_output(xpad);
fail3: usb_free_urb(xpad->irq_in);
fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
fail1: input_free_device(input_dev);
kfree(xpad);
return error;
}
static ssize_t
write_rio(struct file *file, const char __user *buffer,
size_t count, loff_t * ppos)
{
DEFINE_WAIT(wait);
struct rio_usb_data *rio = &rio_instance;
unsigned long copy_size;
unsigned long bytes_written = 0;
unsigned int partial;
int result = 0;
int maxretry;
int errn = 0;
int intr;
intr = mutex_lock_interruptible(&(rio->lock));
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
do {
unsigned long thistime;
char *obuf = rio->obuf;
thistime = copy_size =
(count >= OBUF_SIZE) ? OBUF_SIZE : count;
if (copy_from_user(rio->obuf, buffer, copy_size)) {
errn = -EFAULT;
goto error;
}
maxretry = 5;
while (thistime) {
if (!rio->rio_dev) {
errn = -ENODEV;
goto error;
}
if (signal_pending(current)) {
mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EINTR;
}
result = usb_bulk_msg(rio->rio_dev,
usb_sndbulkpipe(rio->rio_dev, 2),
obuf, thistime, &partial, 5000);
dbg("write stats: result:%d thistime:%lu partial:%u",
result, thistime, partial);
if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
if (!maxretry--) {
errn = -ETIME;
goto error;
}
prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
schedule_timeout(NAK_TIMEOUT);
finish_wait(&rio->wait_q, &wait);
continue;
} else if (!result && partial) {
obuf += partial;
thistime -= partial;
} else
break;
};
if (result) {
err("Write Whoops - %x", result);
errn = -EIO;
goto error;
}
bytes_written += copy_size;
count -= copy_size;
buffer += copy_size;
} while (count > 0);
mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EIO;
error:
mutex_unlock(&(rio->lock));
return errn;
}
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
int i;
int error = -ENOMEM;
for (i = 0; xpad_device[i].idVendor; i++) {
if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
(le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
break;
}
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!xpad || !input_dev)
goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata)
goto fail1;
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_in)
goto fail2;
xpad->udev = udev;
xpad->dpad_mapping = xpad_device[i].dpad_mapping;
xpad->xtype = xpad_device[i].xtype;
if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
xpad->dpad_mapping = !dpad_to_buttons;
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
xpad->xtype = XTYPE_XBOX360W;
else
xpad->xtype = XTYPE_XBOX360;
} else
xpad->xtype = XTYPE_XBOX;
}
xpad->dev = input_dev;
usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
input_dev->name = xpad_device[i].name;
input_dev->phys = xpad->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, xpad);
input_dev->open = xpad_open;
input_dev->close = xpad_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
/* set up buttons */
for (i = 0; xpad_common_btn[i] >= 0; i++)
set_bit(xpad_common_btn[i], input_dev->keybit);
if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W))
for (i = 0; xpad360_btn[i] >= 0; i++)
set_bit(xpad360_btn[i], input_dev->keybit);
else
for (i = 0; xpad_btn[i] >= 0; i++)
set_bit(xpad_btn[i], input_dev->keybit);
if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
for (i = 0; xpad_btn_pad[i] >= 0; i++)
set_bit(xpad_btn_pad[i], input_dev->keybit);
/* set up axes */
for (i = 0; xpad_abs[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs[i]);
if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
for (i = 0; xpad_abs_pad[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
error = xpad_init_output(intf, xpad);
if (error)
goto fail2;
error = xpad_init_ff(xpad);
if (error)
goto fail3;
error = xpad_led_probe(xpad);
if (error)
goto fail3;
ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
xpad, ep_irq_in->bInterval);
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
error = input_register_device(xpad->dev);
if (error)
goto fail4;
usb_set_intfdata(intf, xpad);
/*
* Submit the int URB immediatly rather than waiting for open
* because we get status messages from the device whether
* or not any controllers are attached. In fact, it's
* exactly the message that a controller has arrived that
* we're waiting for.
*/
if (xpad->xtype == XTYPE_XBOX360W) {
xpad->irq_in->dev = xpad->udev;
error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
if (error)
goto fail4;
/*
* Setup the message to set the LEDs on the
* controller when it shows up
*/
xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
if(!xpad->bulk_out)
goto fail5;
xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
if(!xpad->bdata)
goto fail6;
xpad->bdata[2] = 0x08;
switch (intf->cur_altsetting->desc.bInterfaceNumber) {
case 0:
xpad->bdata[3] = 0x42;
break;
case 2:
xpad->bdata[3] = 0x43;
break;
case 4:
xpad->bdata[3] = 0x44;
break;
case 6:
xpad->bdata[3] = 0x45;
}
ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
usb_fill_bulk_urb(xpad->bulk_out, udev,
usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
}
return 0;
fail6: usb_free_urb(xpad->bulk_out);
fail5: usb_kill_urb(xpad->irq_in);
fail4: usb_free_urb(xpad->irq_in);
fail3: xpad_deinit_output(xpad);
fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
fail1: input_free_device(input_dev);
kfree(xpad);
return error;
}
static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
unsigned int plen, void *payload,
unsigned int outlen, void *out)
{
struct ar9170_usb *aru = (void *) ar;
struct urb *urb = NULL;
unsigned long flags;
int err = -ENOMEM;
if (unlikely(!IS_ACCEPTING_CMD(ar)))
return -EPERM;
if (WARN_ON(plen > AR9170_MAX_CMD_LEN - 4))
return -EINVAL;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (unlikely(!urb))
goto err_free;
ar->cmdbuf[0] = cpu_to_le32(plen);
ar->cmdbuf[0] |= cpu_to_le32(cmd << 8);
/* writing multiple regs fills this buffer already */
if (plen && payload != (u8 *)(&ar->cmdbuf[1]))
memcpy(&ar->cmdbuf[1], payload, plen);
spin_lock_irqsave(&aru->common.cmdlock, flags);
aru->readbuf = (u8 *)out;
aru->readlen = outlen;
spin_unlock_irqrestore(&aru->common.cmdlock, flags);
usb_fill_int_urb(urb, aru->udev,
usb_sndbulkpipe(aru->udev, AR9170_EP_CMD),
aru->common.cmdbuf, plen + 4,
ar9170_usb_tx_urb_complete, NULL, 1);
usb_anchor_urb(urb, &aru->tx_submitted);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (unlikely(err)) {
usb_unanchor_urb(urb);
usb_free_urb(urb);
goto err_unbuf;
}
usb_free_urb(urb);
err = wait_for_completion_timeout(&aru->cmd_wait, HZ);
if (err == 0) {
err = -ETIMEDOUT;
goto err_unbuf;
}
if (aru->readlen != outlen) {
err = -EMSGSIZE;
goto err_unbuf;
}
return 0;
err_unbuf:
/* Maybe the device was removed in the second we were waiting? */
if (IS_STARTED(ar)) {
dev_err(&aru->udev->dev, "no command feedback "
"received (%d).\n", err);
/* provide some maybe useful debug information */
print_hex_dump_bytes("ar9170 cmd: ", DUMP_PREFIX_NONE,
aru->common.cmdbuf, plen + 4);
dump_stack();
}
/* invalidate to avoid completing the next prematurely */
spin_lock_irqsave(&aru->common.cmdlock, flags);
aru->readbuf = NULL;
aru->readlen = 0;
spin_unlock_irqrestore(&aru->common.cmdlock, flags);
err_free:
return err;
}
static int acm_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_cdc_union_desc *union_header = NULL;
struct usb_cdc_country_functional_desc *cfd = NULL;
unsigned char *buffer = intf->altsetting->extra;
int buflen = intf->altsetting->extralen;
struct usb_interface *control_interface;
struct usb_interface *data_interface;
struct usb_endpoint_descriptor *epctrl = NULL;
struct usb_endpoint_descriptor *epread = NULL;
struct usb_endpoint_descriptor *epwrite = NULL;
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct acm *acm;
int minor;
int ctrlsize, readsize;
u8 *buf;
u8 ac_management_function = 0;
u8 call_management_function = 0;
int call_interface_num = -1;
int data_interface_num = -1;
unsigned long quirks;
int num_rx_buf;
int i;
int combined_interfaces = 0;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR;
/* not a real CDC ACM device */
if (quirks & NOT_REAL_ACM)
return -ENODEV;
if (max_intfs == 1) {
/* XMM HACK - use ACM for interfaces 0/1 only */
switch (intf->cur_altsetting->desc.bInterfaceNumber)
{
case 0: case 1:
I("XMM HACK -"
" interface #%d create for ttyACM device\n",
intf->cur_altsetting->desc.bInterfaceNumber);
break;
default:
D("XMM HACK -"
" interface #%d reserved for RAW-IP network driver\n",
intf->cur_altsetting->desc.bInterfaceNumber);
return -EINVAL;
}
} else if (max_intfs == 2) {
/* XMM HACK - use ACM for interfaces 0/1 & 6/7 only */
switch (intf->cur_altsetting->desc.bInterfaceNumber)
{
case 0: case 1:
case 6: case 7:
I("XMM HACK -"
" interface #%d create for ttyACM device\n",
intf->cur_altsetting->desc.bInterfaceNumber);
break;
default:
D("XMM HACK -"
" interface #%d reserved for RAW-IP network driver\n",
intf->cur_altsetting->desc.bInterfaceNumber);
return -EINVAL;
}
}
/* handle quirks deadly to normal probing*/
if (quirks & NO_UNION_NORMAL) {
data_interface = usb_ifnum_to_if(usb_dev, 1);
control_interface = usb_ifnum_to_if(usb_dev, 0);
if (!control_interface || !data_interface) {
E("no ctrl or data interfaces\n");
return -ENODEV;
}
goto skip_normal_probe;
}
/* normal probing*/
if (!buffer) {
E("Weird descriptor references\n");
return -EINVAL;
}
if (!buflen) {
if (intf->cur_altsetting->endpoint &&
intf->cur_altsetting->endpoint->extralen &&
intf->cur_altsetting->endpoint->extra) {
D("Seeking extra descriptors on endpoint\n");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
E("Zero length descriptor references\n");
return -EINVAL;
}
}
while (buflen > 0) {
if (buffer[1] != USB_DT_CS_INTERFACE) {
E("skipping garbage\n");
goto next_desc;
}
switch (buffer[2]) {
case USB_CDC_UNION_TYPE: /* we've found it */
if (union_header) {
E("More than one "
"union descriptor, skipping ...\n");
goto next_desc;
}
union_header = (struct usb_cdc_union_desc *)buffer;
break;
case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
cfd = (struct usb_cdc_country_functional_desc *)buffer;
break;
case USB_CDC_HEADER_TYPE: /* maybe check version */
break; /* for now we ignore it */
case USB_CDC_ACM_TYPE:
ac_management_function = buffer[3];
break;
case USB_CDC_CALL_MANAGEMENT_TYPE:
call_management_function = buffer[3];
call_interface_num = buffer[4];
if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3)
D("This device cannot do calls on its own. It is not a modem.\n");
break;
default:
/* there are LOTS more CDC descriptors that
* could legitimately be found here.
*/
D("Ignoring descriptor: "
"type %02x, length %d\n",
buffer[2], buffer[0]);
break;
}
next_desc:
buflen -= buffer[0];
buffer += buffer[0];
}
if (!union_header) {
if (call_interface_num > 0) {
D("No union descriptor, using call management descriptor\n");
/* quirks for Droids MuIn LCD */
if (quirks & NO_DATA_INTERFACE)
data_interface = usb_ifnum_to_if(usb_dev, 0);
else
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
if (!data_interface) {
D("no data interfaces\n");
return -ENODEV;
}
} else {
if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
D("No union descriptor, giving up\n");
return -ENODEV;
} else {
D("No union descriptor, testing for castrated device\n");
combined_interfaces = 1;
control_interface = data_interface = intf;
goto look_for_collapsed_interface;
}
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
D("no interfaces\n");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
D("Separate call control interface. That is not fully supported.\n");
if (control_interface == data_interface) {
/* some broken devices designed for windows work this way */
D("Control and data interfaces are not separated!\n");
combined_interfaces = 1;
/* a popular other OS doesn't use it */
quirks |= NO_CAP_LINE;
if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
E("This needs exactly 3 endpoints\n");
return -EINVAL;
}
look_for_collapsed_interface:
for (i = 0; i < 3; i++) {
struct usb_endpoint_descriptor *ep;
ep = &data_interface->cur_altsetting->endpoint[i].desc;
if (usb_endpoint_is_int_in(ep))
epctrl = ep;
else if (usb_endpoint_is_bulk_out(ep))
epwrite = ep;
else if (usb_endpoint_is_bulk_in(ep))
epread = ep;
else
return -EINVAL;
}
if (!epctrl || !epread || !epwrite)
return -ENODEV;
else
goto made_compressed_probe;
}
skip_normal_probe:
/*workaround for switched interfaces */
if (data_interface->cur_altsetting->desc.bInterfaceClass
!= CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass
== CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
D("Your device has switched interfaces.\n");
t = control_interface;
control_interface = data_interface;
data_interface = t;
} else {
return -EINVAL;
}
}
/* Accept probe requests only for the control interface */
if (!combined_interfaces && intf != control_interface)
return -ENODEV;
if (!combined_interfaces && usb_interface_claimed(data_interface)) {
/* valid in this context */
D("The data interface isn't available\n");
return -EBUSY;
}
if (data_interface->cur_altsetting->desc.bNumEndpoints < 2)
return -EINVAL;
epctrl = &control_interface->cur_altsetting->endpoint[0].desc;
epread = &data_interface->cur_altsetting->endpoint[0].desc;
epwrite = &data_interface->cur_altsetting->endpoint[1].desc;
/* workaround for switched endpoints */
if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
D("The data interface has switched endpoints\n");
t = epread;
epread = epwrite;
epwrite = t;
}
made_compressed_probe:
D( "interfaces are valid\n");
for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
if (minor == ACM_TTY_MINORS) {
E("no more free acm devices\n");
return -ENODEV;
}
acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
if (acm == NULL) {
E("out of memory (acm kzalloc)\n");
goto alloc_fail;
}
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize) *
(quirks == SINGLE_RX_URB ? 1 : 2);
acm->combined_interfaces = combined_interfaces;
acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
acm->control = control_interface;
acm->data = data_interface;
acm->minor = minor;
acm->dev = usb_dev;
acm->ctrl_caps = ac_management_function;
if (quirks & NO_CAP_LINE)
acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
INIT_WORK(&acm->work, acm_softint);
init_usb_anchor(&acm->deferred);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
acm->is_int_ep = usb_endpoint_xfer_int(epread);
if (acm->is_int_ep)
acm->bInterval = epread->bInterval;
if (quirks & NO_HANGUP_IN_RESET_RESUME)
acm->no_hangup_in_reset_resume = 1;
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
E("out of memory (ctrl buffer alloc)\n");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
E("out of memory (write buffer alloc)\n");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
E("out of memory (ctrlurb kmalloc)\n");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_rb *rb = &(acm->read_buffers[i]);
struct urb *urb;
rb->base = usb_alloc_coherent(acm->dev, readsize, GFP_KERNEL,
&rb->dma);
if (!rb->base) {
E("out of memory "
"(read bufs usb_alloc_coherent)\n");
goto alloc_fail6;
}
rb->index = i;
rb->instance = acm;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
E("out of memory (read urbs usb_alloc_urb)\n");
goto alloc_fail6;
}
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
urb->transfer_dma = rb->dma;
if (acm->is_int_ep) {
usb_fill_int_urb(urb, acm->dev,
acm->rx_endpoint,
rb->base,
acm->readsize,
acm_read_bulk_callback, rb,
acm->bInterval);
} else {
usb_fill_bulk_urb(urb, acm->dev,
acm->rx_endpoint,
rb->base,
acm->readsize,
acm_read_bulk_callback, rb);
}
acm->read_urbs[i] = urb;
__set_bit(i, &acm->read_urbs_free);
}
for (i = 0; i < ACM_NW; i++) {
struct acm_wb *snd = &(acm->wb[i]);
snd->urb = usb_alloc_urb(0, GFP_KERNEL);
if (snd->urb == NULL) {
E("out of memory (write urbs usb_alloc_urb)\n");
goto alloc_fail7;
}
if (usb_endpoint_xfer_int(epwrite))
usb_fill_int_urb(snd->urb, usb_dev,
usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
else
usb_fill_bulk_urb(snd->urb, usb_dev,
usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP+URB_ZERO_PACKET);
snd->instance = acm;
}
usb_set_intfdata(intf, acm);
i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
if (i < 0)
goto alloc_fail7;
if (cfd) { /* export the country data */
acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
if (!acm->country_codes)
goto skip_countries;
acm->country_code_size = cfd->bLength - 4;
memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
cfd->bLength - 4);
acm->country_rel_date = cfd->iCountryCodeRelDate;
i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
if (i < 0) {
kfree(acm->country_codes);
acm->country_codes = NULL;
acm->country_code_size = 0;
goto skip_countries;
}
i = device_create_file(&intf->dev,
&dev_attr_iCountryCodeRelDate);
if (i < 0) {
device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
kfree(acm->country_codes);
acm->country_codes = NULL;
acm->country_code_size = 0;
goto skip_countries;
}
}
skip_countries:
usb_fill_int_urb(acm->ctrlurb, usb_dev,
usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
/* works around buggy devices */
epctrl->bInterval ? epctrl->bInterval : 0xff);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
I("ttyACM%d: USB ACM device\n", minor);
acm_set_control(acm, acm->ctrlout);
acm->line.dwDTERate = cpu_to_le32(9600);
acm->line.bDataBits = 8;
acm_set_line(acm, &acm->line);
usb_driver_claim_interface(&acm_driver, data_interface, acm);
usb_set_intfdata(data_interface, acm);
usb_get_intf(control_interface);
tty_register_device(acm_tty_driver, minor, &control_interface->dev);
acm_table[minor] = acm;
return 0;
alloc_fail7:
for (i = 0; i < ACM_NW; i++)
usb_free_urb(acm->wb[i].urb);
alloc_fail6:
for (i = 0; i < num_rx_buf; i++)
usb_free_urb(acm->read_urbs[i]);
acm_read_buffers_free(acm);
usb_free_urb(acm->ctrlurb);
alloc_fail5:
acm_write_buffers_free(acm);
alloc_fail4:
usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
alloc_fail2:
kfree(acm);
alloc_fail:
return -ENOMEM;
}
static int __devinit if_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_host_interface *data_desc;
struct usb_link_device *usb_ld =
(struct usb_link_device *)id->driver_info;
struct link_device *ld = &usb_ld->ld;
struct usb_interface *data_intf;
struct usb_device *usbdev = interface_to_usbdev(intf);
struct device *dev, *ehci_dev, *root_hub;
struct if_usb_devdata *pipe;
struct urb *urb;
int i;
int j;
int dev_id;
int err;
/* To detect usb device order probed */
dev_id = intf->cur_altsetting->desc.bInterfaceNumber;
if (dev_id >= IF_USB_DEVNUM_MAX) {
dev_err(&intf->dev, "Device id %d cannot support\n",
dev_id);
return -EINVAL;
}
if (!usb_ld) {
dev_err(&intf->dev,
"if_usb device doesn't be allocated\n");
err = ENOMEM;
goto out;
}
mif_info("probe dev_id=%d usb_device_id(0x%p), usb_ld (0x%p)\n",
dev_id, id, usb_ld);
usb_ld->usbdev = usbdev;
usb_get_dev(usbdev);
for (i = 0; i < IF_USB_DEVNUM_MAX; i++) {
data_intf = usb_ifnum_to_if(usbdev, i);
/* remap endpoint of RAW to no.1 for LTE modem */
if (i == 0)
pipe = &usb_ld->devdata[1];
else if (i == 1)
pipe = &usb_ld->devdata[0];
else
pipe = &usb_ld->devdata[i];
pipe->disconnected = 0;
pipe->data_intf = data_intf;
data_desc = data_intf->cur_altsetting;
/* Endpoints */
if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
pipe->rx_pipe = usb_rcvbulkpipe(usbdev,
data_desc->endpoint[0].desc.bEndpointAddress);
pipe->tx_pipe = usb_sndbulkpipe(usbdev,
data_desc->endpoint[1].desc.bEndpointAddress);
pipe->rx_buf_size = 1024*4;
} else {
pipe->rx_pipe = usb_rcvbulkpipe(usbdev,
data_desc->endpoint[1].desc.bEndpointAddress);
pipe->tx_pipe = usb_sndbulkpipe(usbdev,
data_desc->endpoint[0].desc.bEndpointAddress);
pipe->rx_buf_size = 1024*4;
}
if (i == 0) {
dev_info(&usbdev->dev, "USB IF USB device found\n");
} else {
err = usb_driver_claim_interface(&if_usb_driver,
data_intf, usb_ld);
if (err < 0) {
mif_err("failed to cliam usb interface\n");
goto out;
}
}
usb_set_intfdata(data_intf, usb_ld);
usb_ld->dev_count++;
pm_suspend_ignore_children(&data_intf->dev, true);
for (j = 0; j < URB_COUNT; j++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
mif_err("alloc urb fail\n");
err = -ENOMEM;
goto out2;
}
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
urb->transfer_buffer = usb_alloc_coherent(usbdev,
pipe->rx_buf_size, GFP_KERNEL,
&urb->transfer_dma);
if (!urb->transfer_buffer) {
mif_err(
"Failed to allocate transfer buffer\n");
usb_free_urb(urb);
err = -ENOMEM;
goto out2;
}
usb_fill_bulk_urb(urb, usbdev, pipe->rx_pipe,
urb->transfer_buffer, pipe->rx_buf_size,
usb_rx_complete, pipe);
usb_anchor_urb(urb, &pipe->urbs);
}
}
/* temporary call reset_resume */
atomic_set(&usb_ld->suspend_count, 1);
if_usb_reset_resume(data_intf);
atomic_set(&usb_ld->suspend_count, 0);
SET_HOST_ACTIVE(usb_ld->pdata, 1);
usb_ld->host_wake_timeout_flag = 0;
if (gpio_get_value(usb_ld->pdata->gpio_phone_active)) {
struct link_pm_data *pm_data = usb_ld->link_pm_data;
int delay = pm_data->autosuspend_delay_ms ?:
DEFAULT_AUTOSUSPEND_DELAY_MS;
pm_runtime_set_autosuspend_delay(&usbdev->dev, delay);
dev = &usbdev->dev;
if (dev->parent) {
dev_dbg(&usbdev->dev, "if_usb Runtime PM Start!!\n");
usb_enable_autosuspend(usb_ld->usbdev);
/* s5p-ehci runtime pm allow - usb phy suspend mode */
root_hub = &usbdev->bus->root_hub->dev;
ehci_dev = root_hub->parent;
mif_debug("ehci device = %s, %s\n",
dev_driver_string(ehci_dev),
dev_name(ehci_dev));
pm_runtime_allow(ehci_dev);
if (!pm_data->autosuspend)
pm_runtime_forbid(dev);
if (has_hub(usb_ld))
link_pm_preactive(pm_data);
pm_data->root_hub = root_hub;
}
usb_ld->flow_suspend = 0;
/* Queue work if skbs were pending before a disconnect/probe */
if (ld->sk_fmt_tx_q.qlen || ld->sk_raw_tx_q.qlen)
queue_delayed_work(ld->tx_wq, &ld->tx_delayed_work, 0);
usb_ld->if_usb_connected = 1;
/*USB3503*/
mif_debug("hub active complete\n");
usb_change_modem_state(usb_ld, STATE_ONLINE);
} else {
static int
brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *usb = interface_to_usbdev(intf);
struct brcmf_usbdev_info *devinfo;
struct usb_interface_descriptor *desc;
struct usb_endpoint_descriptor *endpoint;
int ret = 0;
u32 num_of_eps;
u8 endpoint_num, ep;
brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
if (devinfo == NULL)
return -ENOMEM;
devinfo->usbdev = usb;
devinfo->dev = &usb->dev;
/* Take an init lock, to protect for disconnect while still loading.
* Necessary because of the asynchronous firmware load construction
*/
mutex_init(&devinfo->dev_init_lock);
mutex_lock(&devinfo->dev_init_lock);
usb_set_intfdata(intf, devinfo);
/* Check that the device supports only one configuration */
if (usb->descriptor.bNumConfigurations != 1) {
brcmf_err("Number of configurations: %d not supported\n",
usb->descriptor.bNumConfigurations);
ret = -ENODEV;
goto fail;
}
if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) &&
(usb->descriptor.bDeviceClass != USB_CLASS_MISC) &&
(usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) {
brcmf_err("Device class: 0x%x not supported\n",
usb->descriptor.bDeviceClass);
ret = -ENODEV;
goto fail;
}
desc = &intf->altsetting[0].desc;
if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
(desc->bInterfaceSubClass != 2) ||
(desc->bInterfaceProtocol != 0xff)) {
brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n",
desc->bInterfaceNumber, desc->bInterfaceClass,
desc->bInterfaceSubClass, desc->bInterfaceProtocol);
ret = -ENODEV;
goto fail;
}
num_of_eps = desc->bNumEndpoints;
for (ep = 0; ep < num_of_eps; ep++) {
endpoint = &intf->altsetting[0].endpoint[ep].desc;
endpoint_num = usb_endpoint_num(endpoint);
if (!usb_endpoint_xfer_bulk(endpoint))
continue;
if (usb_endpoint_dir_in(endpoint)) {
if (!devinfo->rx_pipe)
devinfo->rx_pipe =
usb_rcvbulkpipe(usb, endpoint_num);
} else {
if (!devinfo->tx_pipe)
devinfo->tx_pipe =
usb_sndbulkpipe(usb, endpoint_num);
}
}
if (devinfo->rx_pipe == 0) {
brcmf_err("No RX (in) Bulk EP found\n");
ret = -ENODEV;
goto fail;
}
if (devinfo->tx_pipe == 0) {
brcmf_err("No TX (out) Bulk EP found\n");
ret = -ENODEV;
goto fail;
}
devinfo->ifnum = desc->bInterfaceNumber;
if (usb->speed == USB_SPEED_SUPER)
brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n");
else if (usb->speed == USB_SPEED_HIGH)
brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n");
else
brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
ret = brcmf_usb_probe_cb(devinfo);
if (ret)
goto fail;
/* Success */
return 0;
fail:
mutex_unlock(&devinfo->dev_init_lock);
kfree(devinfo);
usb_set_intfdata(intf, NULL);
return ret;
}
int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting)
{
struct cdc_ncm_ctx *ctx;
struct usb_driver *driver;
u8 *buf;
int len;
int temp;
u8 iface_no;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
hrtimer_init(&ctx->tx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
ctx->tx_timer.function = &cdc_ncm_tx_timer_cb;
ctx->bh.data = (unsigned long)ctx;
ctx->bh.func = cdc_ncm_txpath_bh;
atomic_set(&ctx->stop, 0);
spin_lock_init(&ctx->mtx);
ctx->netdev = dev->net;
/* store ctx pointer in device data field */
dev->data[0] = (unsigned long)ctx;
/* get some pointers */
driver = driver_of(intf);
buf = intf->cur_altsetting->extra;
len = intf->cur_altsetting->extralen;
ctx->udev = dev->udev;
ctx->intf = intf;
/* parse through descriptors associated with control interface */
while ((len > 0) && (buf[0] > 2) && (buf[0] <= len)) {
if (buf[1] != USB_DT_CS_INTERFACE)
goto advance;
switch (buf[2]) {
case USB_CDC_UNION_TYPE:
if (buf[0] < sizeof(*(ctx->union_desc)))
break;
ctx->union_desc =
(const struct usb_cdc_union_desc *)buf;
ctx->control = usb_ifnum_to_if(dev->udev,
ctx->union_desc->bMasterInterface0);
ctx->data = usb_ifnum_to_if(dev->udev,
ctx->union_desc->bSlaveInterface0);
break;
case USB_CDC_ETHERNET_TYPE:
if (buf[0] < sizeof(*(ctx->ether_desc)))
break;
ctx->ether_desc =
(const struct usb_cdc_ether_desc *)buf;
dev->hard_mtu =
le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
if (dev->hard_mtu < CDC_NCM_MIN_DATAGRAM_SIZE)
dev->hard_mtu = CDC_NCM_MIN_DATAGRAM_SIZE;
else if (dev->hard_mtu > CDC_NCM_MAX_DATAGRAM_SIZE)
dev->hard_mtu = CDC_NCM_MAX_DATAGRAM_SIZE;
break;
case USB_CDC_NCM_TYPE:
if (buf[0] < sizeof(*(ctx->func_desc)))
break;
ctx->func_desc = (const struct usb_cdc_ncm_desc *)buf;
break;
case USB_CDC_MBIM_TYPE:
if (buf[0] < sizeof(*(ctx->mbim_desc)))
break;
ctx->mbim_desc = (const struct usb_cdc_mbim_desc *)buf;
break;
default:
break;
}
advance:
/* advance to next descriptor */
temp = buf[0];
buf += temp;
len -= temp;
}
/* some buggy devices have an IAD but no CDC Union */
if (!ctx->union_desc && intf->intf_assoc && intf->intf_assoc->bInterfaceCount == 2) {
ctx->control = intf;
ctx->data = usb_ifnum_to_if(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber + 1);
dev_dbg(&intf->dev, "CDC Union missing - got slave from IAD\n");
}
/* check if we got everything */
if ((ctx->control == NULL) || (ctx->data == NULL) ||
((!ctx->mbim_desc) && ((ctx->ether_desc == NULL) || (ctx->control != intf))))
goto error;
/* claim data interface, if different from control */
if (ctx->data != ctx->control) {
temp = usb_driver_claim_interface(driver, ctx->data, dev);
if (temp)
goto error;
}
iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
/* Reset data interface. Some devices will not reset properly
* unless they are configured first. Toggle the altsetting to
* force a reset
*/
usb_set_interface(dev->udev, iface_no, data_altsetting);
temp = usb_set_interface(dev->udev, iface_no, 0);
if (temp)
goto error2;
/* initialize data interface */
if (cdc_ncm_setup(ctx))
goto error2;
/* Some firmwares need a pause here or they will silently fail
* to set up the interface properly. This value was decided
* empirically on a Sierra Wireless MC7455 running 02.08.02.00
* firmware.
*/
usleep_range(10000, 20000);
/* configure data interface */
temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
if (temp)
goto error2;
cdc_ncm_find_endpoints(ctx, ctx->data);
cdc_ncm_find_endpoints(ctx, ctx->control);
if ((ctx->in_ep == NULL) || (ctx->out_ep == NULL) ||
(ctx->status_ep == NULL))
goto error2;
dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
usb_set_intfdata(ctx->data, dev);
usb_set_intfdata(ctx->control, dev);
usb_set_intfdata(ctx->intf, dev);
if (ctx->ether_desc) {
temp = usbnet_get_ethernet_addr(dev, ctx->ether_desc->iMACAddress);
if (temp)
goto error2;
dev_info(&dev->udev->dev, "MAC-Address: %pM\n", dev->net->dev_addr);
}
dev->in = usb_rcvbulkpipe(dev->udev,
ctx->in_ep->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
dev->out = usb_sndbulkpipe(dev->udev,
ctx->out_ep->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
dev->status = ctx->status_ep;
dev->rx_urb_size = ctx->rx_max;
ctx->tx_speed = ctx->rx_speed = 0;
return 0;
error2:
usb_set_intfdata(ctx->control, NULL);
usb_set_intfdata(ctx->data, NULL);
if (ctx->data != ctx->control)
usb_driver_release_interface(driver, ctx->data);
error:
cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]);
dev->data[0] = 0;
dev_info(&dev->udev->dev, "bind() failure\n");
return -ENODEV;
}
static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
{
struct cmdbuf_t *tcb;
unsigned long flags;
int count;
int status = -ENOENT;
struct usb_cardstate *ucs = cs->hw.usb;
do {
if (!cb->len) {
tcb = cb;
spin_lock_irqsave(&cs->cmdlock, flags);
cs->cmdbytes -= cs->curlen;
gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
cs->curlen, cs->cmdbytes);
cs->cmdbuf = cb = cb->next;
if (cb) {
cb->prev = NULL;
cs->curlen = cb->len;
} else {
cs->lastcmdbuf = NULL;
cs->curlen = 0;
}
spin_unlock_irqrestore(&cs->cmdlock, flags);
if (tcb->wake_tasklet)
tasklet_schedule(tcb->wake_tasklet);
kfree(tcb);
}
if (cb) {
count = min(cb->len, ucs->bulk_out_size);
gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
usb_sndbulkpipe(ucs->udev,
ucs->bulk_out_endpointAddr & 0x0f),
cb->buf + cb->offset, count,
gigaset_write_bulk_callback, cs);
cb->offset += count;
cb->len -= count;
ucs->busy = 1;
spin_lock_irqsave(&cs->lock, flags);
status = cs->connected ?
usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
-ENODEV;
spin_unlock_irqrestore(&cs->lock, flags);
if (status) {
ucs->busy = 0;
dev_err(cs->dev,
"could not submit urb (error %d)\n",
-status);
cb->len = 0; /* skip urb => remove cb+wakeup
in next loop cycle */
}
}
} while (cb && status); /* next command on error */
return status;
}
/*
* Sends a barker buffer to the device
*
* This helper will allocate a kmalloced buffer and use it to transmit
* (then free it). Reason for this is that other arches cannot use
* stack/vmalloc/text areas for DMA transfers.
*
* Error recovery here is simpler: anything is considered a hard error
* and will move the reset code to use a last-resort bus-based reset.
*/
static
int __i2400mu_send_barker(struct i2400mu *i2400mu,
const __le32 *barker,
size_t barker_size,
unsigned endpoint)
{
struct usb_endpoint_descriptor *epd = NULL;
int pipe, actual_len, ret;
struct device *dev = &i2400mu->usb_iface->dev;
void *buffer;
int do_autopm = 1;
ret = usb_autopm_get_interface(i2400mu->usb_iface);
if (ret < 0) {
dev_err(dev, "RESET: can't get autopm: %d\n", ret);
do_autopm = 0;
}
ret = -ENOMEM;
buffer = kmalloc(barker_size, GFP_KERNEL);
if (buffer == NULL)
goto error_kzalloc;
epd = usb_get_epd(i2400mu->usb_iface, endpoint);
pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
memcpy(buffer, barker, barker_size);
retry:
ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size,
&actual_len, 200);
switch (ret) {
case 0:
if (actual_len != barker_size) { /* Too short? drop it */
dev_err(dev, "E: %s: short write (%d B vs %zu "
"expected)\n",
__func__, actual_len, barker_size);
ret = -EIO;
}
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "E: %s: too many stalls in "
"URB; resetting device\n", __func__);
usb_queue_reset_device(i2400mu->usb_iface);
/* fallthrough */
} else {
usb_clear_halt(i2400mu->usb_dev, pipe);
msleep(10); /* give the device some time */
goto retry;
}
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
case -ESHUTDOWN: /* and exit */
case -ECONNRESET:
ret = -ESHUTDOWN;
break;
default: /* Some error? */
if (edc_inc(&i2400mu->urb_edc,
EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "E: %s: maximum errors in URB "
"exceeded; resetting device\n",
__func__);
usb_queue_reset_device(i2400mu->usb_iface);
} else {
dev_warn(dev, "W: %s: cannot send URB: %d\n",
__func__, ret);
goto retry;
}
}
kfree(buffer);
error_kzalloc:
if (do_autopm)
usb_autopm_put_interface(i2400mu->usb_iface);
return ret;
}
static int btusb_send_frame(struct sk_buff *skb)
{
struct hci_dev *hdev = (struct hci_dev *) skb->dev;
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
unsigned int pipe;
int err;
BT_DBG("%s", hdev->name);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -EBUSY;
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
if (!dr) {
usb_free_urb(urb);
return -ENOMEM;
}
dr->bRequestType = data->cmdreq_type;
dr->bRequest = 0;
dr->wIndex = 0;
dr->wValue = 0;
dr->wLength = __cpu_to_le16(skb->len);
pipe = usb_sndctrlpipe(data->udev, 0x00);
usb_fill_control_urb(urb, data->udev, pipe, (void *) dr,
skb->data, skb->len, btusb_tx_complete, skb);
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
if (!data->bulk_tx_ep)
return -ENODEV;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
pipe = usb_sndbulkpipe(data->udev,
data->bulk_tx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
return -ENODEV;
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
pipe = usb_sndisocpipe(data->udev,
data->isoc_tx_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_isoc_tx_complete,
skb, data->isoc_tx_ep->bInterval);
urb->transfer_flags = URB_ISO_ASAP;
__fill_isoc_descriptor(urb, skb->len,
le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
hdev->stat.sco_tx++;
goto skip_waking;
default:
return -EILSEQ;
}
err = inc_tx(data);
if (err) {
usb_anchor_urb(urb, &data->deferred);
schedule_work(&data->waker);
err = 0;
goto done;
}
skip_waking:
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
} else {
usb_mark_last_busy(data->udev);
}
done:
usb_free_urb(urb);
return err;
}
/**
* @brief This function downloads data/comand packet to device
*
* @param handle Pointer to moal_handle structure
* @param pmbuf Pointer to mlan_buffer structure
* @param ep Endpoint to send
*
* @return MLAN_STATUS_PENDING or MLAN_STATUS_FAILURE
*/
mlan_status
woal_write_data_async(moal_handle * handle, mlan_buffer * pmbuf, t_u8 ep)
{
struct usb_card_rec *cardp = handle->card;
urb_context *context = NULL;
t_u8 *data = (t_u8 *) (pmbuf->pbuf + pmbuf->data_offset);
struct urb *tx_urb = NULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
/* Check if device is removed */
if (handle->surprise_removed) {
PRINTM(ERROR, "Device removed\n");
ret = MLAN_STATUS_FAILURE;
goto tx_ret;
}
if ((ep == cardp->tx_data_ep) &&
(atomic_read(&cardp->tx_data_urb_pending) >= MVUSB_TX_HIGH_WMARK)) {
ret = MLAN_STATUS_RESOURCE;
goto tx_ret;
}
PRINTM(DATA, "woal_write_data_async: ep=%d\n", ep);
if (ep == cardp->tx_cmd_ep) {
context = &cardp->tx_cmd;
} else {
if (cardp->tx_data_ix >= MVUSB_TX_HIGH_WMARK)
cardp->tx_data_ix = 0;
context = &cardp->tx_data_list[cardp->tx_data_ix++];
}
context->handle = handle;
context->ep = ep;
context->pmbuf = pmbuf;
tx_urb = context->urb;
/*
* Use USB API usb_fill_bulk_urb() to set the
* configuration information of the Tx bulk URB
* and initialize the Tx callback
*/
usb_fill_bulk_urb(tx_urb, cardp->udev,
usb_sndbulkpipe(cardp->udev,
ep), data, pmbuf->data_len,
woal_usb_tx_complete, (void *) context);
tx_urb->transfer_flags |= URB_ZERO_PACKET;
if (ep == cardp->tx_cmd_ep)
atomic_inc(&cardp->tx_cmd_urb_pending);
else
atomic_inc(&cardp->tx_data_urb_pending);
if ((ret = usb_submit_urb(tx_urb, GFP_ATOMIC))) {
/* Submit URB failure */
PRINTM(ERROR, "Submit Tx data URB failed: %d\n", ret);
if (ep == cardp->tx_cmd_ep)
atomic_dec(&cardp->tx_cmd_urb_pending);
else {
atomic_dec(&cardp->tx_data_urb_pending);
if (cardp->tx_data_ix)
cardp->tx_data_ix--;
else
cardp->tx_data_ix = MVUSB_TX_HIGH_WMARK;
}
ret = MLAN_STATUS_FAILURE;
} else {
ret = MLAN_STATUS_SUCCESS;
}
tx_ret:
if (!ret)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
