static AcBr::ErrorStatus
faceToNurbSurface(AcBrFace& faceEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// This is the face-bounded surface converted to a NURB.
double fitTol = 0.0;
AcGeNurbSurface surfaceGeometry;
double fitTolRequired = 0.0;
returnValue = faceEntity.getSurfaceAsNurb(surfaceGeometry, &fitTolRequired, &fitTol);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrFace::getSurfaceAsNurb:"));
errorReport(returnValue);
return returnValue;
}
acutPrintf(ACRX_T("\nSurface As Bounded Nurb\n"));
acutPrintf(ACRX_T("\n*Surface fit tolerance is %lf\n"), fitTol);
acutPrintf(ACRX_T("\n**NURB Surface Definition Data begin:\n"));
acutPrintf(ACRX_T("\n**NURB Surface degree in U is %d\n"), surfaceGeometry.degreeInU());
acutPrintf(ACRX_T("\n**NURB Surface degree in V is %d\n"), surfaceGeometry.degreeInV());
acutPrintf(ACRX_T("\n**NURB Surface number of control points in U is %d\n"),
surfaceGeometry.numControlPointsInU());
acutPrintf(ACRX_T("\n**NURB Surface number of control points in V is %d\n"),
surfaceGeometry.numControlPointsInV());
acutPrintf(ACRX_T("\n**NURB Surface number of knots in U is %d\n"),
surfaceGeometry.numKnotsInU());
acutPrintf(ACRX_T("\n**NURB Surface number of knots in V is %d\n"),
surfaceGeometry.numKnotsInV());
acutPrintf(ACRX_T("\n*NURB Surface Definition Data End\n"));
// make a face loop traverser to access the surface boundary
AcBrFaceLoopTraverser faceLoopTrav;
returnValue = faceLoopTrav.setFace(faceEntity);
if (returnValue != AcBr::eOk) {
// eDegenerateTopology means intrinsically bounded (e.g., sphere, torus)
if (returnValue != AcBr::eDegenerateTopology) {
acutPrintf(ACRX_T("\n Error in AcBrFaceLoopTraverser::setFace:"));
errorReport(returnValue);
return returnValue;
} else {
acutPrintf(ACRX_T("\n faceToTrimmedSurface: trimmed data unavailable on intrinsically bounded surfaces\n"));
errorReport(returnValue);
return returnValue;
}
} else while (!faceLoopTrav.done() && (returnValue == AcBr::eOk)) {
// make a loop edge traverser to access the trimming data
AcBrLoopEdgeTraverser loopEdgeTrav;
returnValue = loopEdgeTrav.setLoop(faceLoopTrav);
if (returnValue != AcBr::eOk) {
// eDegenerateTopology means loop vertex (special case and go to next loop)
if (returnValue != AcBr::eDegenerateTopology) {
acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::setLoop:"));
errorReport(returnValue);
return returnValue;
} else {
AcBrLoopVertexTraverser loopVertexTrav;
returnValue = loopVertexTrav.setLoop(faceLoopTrav);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopVertexTraverser::setLoop:"));
errorReport(returnValue);
return returnValue;
} else {
AcBrVertex loopVertex;
returnValue = loopVertexTrav.getVertex(loopVertex);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopVertexTraverser::getVertex:"));
errorReport(returnValue);
return returnValue;
}
AcGePoint3d pointGeometry;
returnValue = loopVertex.getPoint(pointGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrVertex::getPoint:"));
errorReport(returnValue);
return returnValue;
}
acutPrintf(ACRX_T("\n*** Coordinates (x,y,z) at loop vertex: "));
acutPrintf(ACRX_T("%lf,%lf,%lf\n"), pointGeometry.x, pointGeometry.y,
pointGeometry.z);
AcGePoint2d ppointGeometry;
returnValue = loopVertexTrav.getParamPoint(ppointGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopVertexTraverser::getParamPoint:"));
errorReport(returnValue);
return returnValue;
}
acutPrintf(ACRX_T("\n*** Parameters (u,v) at loop vertex: "));
acutPrintf(ACRX_T("%lf,%lf\n"), ppointGeometry.x, ppointGeometry.y);
} // end loop vertex
}
} else while (!loopEdgeTrav.done() && (returnValue == AcBr::eOk)) {
int i, nCtrlPts, nKnots, nWeights;
// Dump the model space NURB curve data
AcGeNurbCurve3d curveGeometry;
returnValue = loopEdgeTrav.getOrientedCurveAsNurb(curveGeometry, 0.0, fitTol);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::getOrientedCurveAsNurb:"));
errorReport(returnValue);
return returnValue;
}
acutPrintf(ACRX_T("\n3D NURB Curve fit tolerance is %lf\n"), fitTol);
acutPrintf(ACRX_T("\n **3D NURB Curve of degree %d and order %d\n"),
curveGeometry.degree(), curveGeometry.order());
nCtrlPts = curveGeometry.numControlPoints();
acutPrintf(ACRX_T("\n **3D NURB Curve has %d control points\n"), nCtrlPts);
for(i=0; i<nCtrlPts; i++) {
acutPrintf(ACRX_T("\n ***Control point [%d] (%lf, %lf, %lf)\n"), i,
curveGeometry.controlPointAt(i).x,
curveGeometry.controlPointAt(i).y,
curveGeometry.controlPointAt(i).z);
}
nKnots = curveGeometry.numKnots();
acutPrintf(ACRX_T("\n **3D NURB Curve has %d knots\n"), nKnots);
for (i=0; i<nKnots; i++) {
acutPrintf(ACRX_T("\n ***Knot [%d] %lf\n"), i,
curveGeometry.knotAt(i));
}
nWeights = curveGeometry.numWeights();
acutPrintf(ACRX_T("\n **3D NURB Curve has %d weights\n"), nWeights);
for (i=0; i<nWeights; i++) {
acutPrintf(ACRX_T("\n ***Weight [%d] %lf)\n"), i,
curveGeometry.weightAt(i));
}
AcGePoint3d pt1, pt2;
if (curveGeometry.hasStartPoint(pt1)) {
acutPrintf(ACRX_T("\n **3D NURB Curve start point is("));
acutPrintf (ACRX_T("%lf , "), pt1.x);
acutPrintf (ACRX_T("%lf , "), pt1.y);
acutPrintf (ACRX_T("%lf "), pt1.z);
acutPrintf(ACRX_T(")\n"));
}
if (curveGeometry.hasEndPoint(pt2)) {
acutPrintf(ACRX_T("\n **3D NURB Curve end point is("));
acutPrintf (ACRX_T("%lf , "), pt2.x);
acutPrintf (ACRX_T("%lf , "), pt2.y);
acutPrintf (ACRX_T("%lf "), pt2.z);
acutPrintf(ACRX_T(")\n"));
}
// Dump the parameter space NURB curve data
AcGeNurbCurve2d pcurveGeometry;
returnValue = loopEdgeTrav.getParamCurveAsNurb(pcurveGeometry, 0.0, fitTol);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::getParamCurveAsNurb:"));
errorReport(returnValue);
return returnValue;
}
acutPrintf(ACRX_T("\n2D NURB Curve fit tolerance is %lf\n"), fitTol);
acutPrintf(ACRX_T("\n **2D NURB Curve of degree %d and order %d\n"),
pcurveGeometry.degree(), pcurveGeometry.order());
nCtrlPts = pcurveGeometry.numControlPoints();
acutPrintf(ACRX_T("\n **2D NURB Curve has %d control points\n"), nCtrlPts);
for(i=0; i<nCtrlPts; i++) {
acutPrintf(ACRX_T("\n ***Control point [%d] (%lf, %lf)\n"), i,
pcurveGeometry.controlPointAt(i).x,
pcurveGeometry.controlPointAt(i).y);
}
nKnots = pcurveGeometry.numKnots();
acutPrintf(ACRX_T("\n **2D NURB Curve has %d knots\n"), nKnots);
for (i=0; i<nKnots; i++) {
acutPrintf(ACRX_T("\n ***Knot [%d] %lf\n"), i,
pcurveGeometry.knotAt(i));
}
nWeights = pcurveGeometry.numWeights();
acutPrintf(ACRX_T("\n **2D NURB Curve has %d weights\n"), nWeights);
for (i=0; i<nWeights; i++) {
acutPrintf(ACRX_T("\n ***Weight [%d] %lf)\n"), i,
pcurveGeometry.weightAt(i));
}
returnValue = loopEdgeTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::next:"));
errorReport(returnValue);
return returnValue;
}
} // end edge while
returnValue = faceLoopTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrFaceLoopTraverser::next:"));
errorReport(returnValue);
return returnValue;
}
} // end loop while
return returnValue;
}
static AcBr::ErrorStatus
brepDumpDown(const AcBrBrep& brepEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// make a global complex traverser
AcBrBrepComplexTraverser brepComplexTrav;
returnValue = brepComplexTrav.setBrep(brepEntity);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrBrepComplexTraverser::setBrep:");
errorReport(returnValue);
return returnValue;
}
// dump the complexes
int complexCount = 0;
while (!brepComplexTrav.done() && (returnValue == AcBr::eOk)) {
complexCount++;
acutPrintf("\n *Complex No: %d \n", complexCount);
// make a complex shell traverser
AcBrComplexShellTraverser complexShellTrav;
returnValue = complexShellTrav.setComplex(brepComplexTrav);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrComplexShellTraverser::setComplex:");
errorReport(returnValue);
return returnValue;
}
// dump the shells
int shellCount = 0;
while (!complexShellTrav.done() && (returnValue == AcBr::eOk)) {
shellCount++;
acutPrintf("\n **Shell No: %d \n", shellCount);
AcBrShell shell;
returnValue = complexShellTrav.getShell(shell);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrComplexShellTraverser::getShell:");
errorReport(returnValue);
return returnValue;
}
AcBr::ShellType stype;
shell.getType(stype);
shellTypeReport(stype);
// make a shell face traverser
AcBrShellFaceTraverser shellFaceTrav;
returnValue = shellFaceTrav.setShell(complexShellTrav);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrShellFaceTraverser::setShell:");
errorReport(returnValue);
return returnValue;
}
// count the faces
int faceCount = 0;
while (!shellFaceTrav.done() && (returnValue == AcBr::eOk)) {
faceCount++;
acutPrintf("\n ***Face No: %d \n", faceCount);
AcBrFace currentFace;
returnValue = shellFaceTrav.getFace(currentFace);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrShellFaceTraverser::getFace:");
errorReport(returnValue);
return returnValue;
}
// make sure that comparing different types returns kFalse
// rather than crashing!
if (currentFace.isEqualTo(&brepEntity)) {
acutPrintf("\n Brep and face have the same contents (impossible!)");
return (AcBr::ErrorStatus)eAmbiguousOutput;
}
int loopCount = 0;
AcBrFaceLoopTraverser faceLoopTrav;
returnValue = faceLoopTrav.setFace(shellFaceTrav);
if (returnValue != AcBr::eOk) {
// eDegenerateTopology means intrinsically bounded (e.g., sphere, torus)
if (returnValue != AcBr::eDegenerateTopology) {
acutPrintf("\n Error in AcBrFaceLoopTraverser::setFace:");
errorReport(returnValue);
return returnValue;
} else returnValue = AcBr::eOk;
} else while (!faceLoopTrav.done() && (returnValue == AcBr::eOk)) {
loopCount++;
acutPrintf("\n ****Loop No: %d \n", loopCount);
AcBrLoop loop;
returnValue = faceLoopTrav.getLoop(loop);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrFaceLoopTraverser::getLoop:");
errorReport(returnValue);
return returnValue;
}
AcBr::LoopType ltype;
loop.getType(ltype);
loopTypeReport(ltype);
int edgeCount = 0;
AcBrLoopEdgeTraverser loopEdgeTrav;
returnValue = loopEdgeTrav.setLoop(faceLoopTrav);
if ((returnValue != AcBr::eOk) && (returnValue != AcBr::eDegenerateTopology)) {
// eDegenerateTopology means this edge is a singularity (loop-vertex)
acutPrintf("\n Error in AcBrLoopEdgeTraverser::setLoop:");
errorReport(returnValue);
return returnValue;
} else while (!loopEdgeTrav.done() && (returnValue == AcBr::eOk)) {
edgeCount++;
acutPrintf("\n *****Edge No: %d \n", edgeCount);
AcBrEdge edgeEntity;
returnValue = loopEdgeTrav.getEdge(edgeEntity);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopEdgeTraverser::getEdge:");
errorReport(returnValue);
return returnValue;
}
// validate the 3d model space curve associated with this edge
AcGeCurve3d* curveGeometry = NULL;
AcGeCurve3d* nativeGeometry = NULL;
returnValue = getNativeOrientedCurve(loopEdgeTrav, curveGeometry, nativeGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in getNativeOrientedCurve:");
errorReport(returnValue);
delete curveGeometry;
delete nativeGeometry;
return returnValue;
}
// validate the 2d parameter space curve associated with this edge
AcGeCurve2d* pcurveGeometry = NULL;
AcGeNurbCurve2d nurbGeometry;
returnValue = getNativeParamCurve(loopEdgeTrav, pcurveGeometry, nurbGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in getNativeParamCurve:");
errorReport(returnValue);
delete pcurveGeometry;
return returnValue;
}
if (pcurveGeometry != NULL) {
// Determine if the model space curve and parameter space curve
// agree in their orientation (2d curves are presented in loop perspective)
AcGeInterval crvIntrvl;
((AcGeExternalCurve3d*)curveGeometry)->getInterval(crvIntrvl);
AcGeInterval pcrvIntrvl;
((AcGeExternalCurve2d*)pcurveGeometry)->getInterval(pcrvIntrvl);
if (crvIntrvl != pcrvIntrvl) {
if ((crvIntrvl.upperBound() == -pcrvIntrvl.lowerBound())
&& (crvIntrvl.lowerBound() == -pcrvIntrvl.upperBound())) {
acutPrintf("\n ******Edge No. %d: Curve and Pcurve Orientations Oppose\n",
edgeCount);
} else {
acutPrintf("\n ******Edge No. %d: Curve and Pcurve Parameter Bounds Differ\n",
edgeCount);
acutPrintf(" *******Curve Parameterisation is (");
acutPrintf("%lf, ", crvIntrvl.lowerBound());
acutPrintf("%lf ", crvIntrvl.upperBound());
acutPrintf(")\n");
acutPrintf(" *******Parameter Curve Parameterisation is (");
acutPrintf("%lf, ", pcrvIntrvl.lowerBound());
acutPrintf("%lf ", pcrvIntrvl.upperBound());
acutPrintf(")\n");
}
}
}
delete pcurveGeometry;
delete curveGeometry;
delete nativeGeometry;
// Inform of any negated orientations, since the model space curve
// is returned as is (no curve reversal for usage by surface boundary)
Adesk::Boolean edgeOriented, loopOriented;
returnValue = loopEdgeTrav.getEdgeOrientToLoop(loopOriented);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopEdgeTraverser::getEdgeOrientToLoop:");
errorReport(returnValue);
return returnValue;
}
returnValue = edgeEntity.getOrientToCurve(edgeOriented);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrEdge::getOrientToCurve:");
errorReport(returnValue);
return returnValue;
}
if (!loopOriented ^ !edgeOriented) {
acutPrintf("\n ******Edge No. %d: Curve Orientation in Loop is Negative\n",
edgeCount);
}
returnValue = loopEdgeTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopEdgeTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end edge while
acutPrintf("\n *****Loop No. %d has %d edges\n", loopCount, edgeCount);
int vtxCount = 0;
AcBrLoopVertexTraverser loopVtxTrav;
returnValue = loopVtxTrav.setLoop(faceLoopTrav);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopVertexTraverser::setLoop:");
errorReport(returnValue);
return returnValue;
} else while (!loopVtxTrav.done() && (returnValue == AcBr::eOk)) {
vtxCount++;
acutPrintf("\n *****Vertex No: %d \n", vtxCount);
AcBrVertex loopPoint;
returnValue = loopVtxTrav.getVertex(loopPoint);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopVertexTraverser::getVertex:");
errorReport(returnValue);
return returnValue;
}
acutPrintf("\nCoordinate of loop vertex: ");
returnValue = vertexDump(loopPoint);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in vertexDump:");
errorReport(returnValue);
return returnValue;
}
returnValue = loopVtxTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopVertexTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end vertex while
acutPrintf("\n *****Loop No. %d has %d vertices\n", loopCount, vtxCount);
returnValue = faceLoopTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrFaceLoopTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end loop while
acutPrintf("\n ****Face No. %d has %d loops\n", faceCount, loopCount);
returnValue = shellFaceTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrShellFaceTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end face while
acutPrintf("\n ***Shell No. %d has %d faces\n", shellCount, faceCount);
returnValue = complexShellTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrComplexShellTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end shell while
acutPrintf("\n **Complex No. %d has %d shells\n", complexCount, shellCount);
returnValue = brepComplexTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrBrepComplexTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end complex while
acutPrintf("\n *Brep has %d complexes\n", complexCount);
return returnValue;
}
