wxString PCB_BASE_FRAME::SelectFootprintFromLibBrowser()
{
// Close the current non-modal Lib browser if opened, and open a new one, in "modal" mode:
FOOTPRINT_VIEWER_FRAME* viewer;
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( viewer )
viewer->Destroy();
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
wxString fpid;
viewer->ShowModal( &fpid, this );
//DBG(printf("%s: fpid:'%s'\n", __func__, TO_UTF8( fpid ) );)
viewer->Destroy();
return fpid;
}
wxString PCB_BASE_FRAME::SelectFootprintFromLibBrowser()
{
// Close the current non-modal Lib browser if opened, and open a new one, in "modal" mode:
FOOTPRINT_VIEWER_FRAME* viewer;
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( viewer )
viewer->Destroy();
SetFocus();
// Creates the modal Lib browser:
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true, this );
wxString fpid;
int ret = viewer->ShowModal( &fpid, this );
(void) ret; // make static analyser quiet
viewer->Destroy();
return fpid;
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true, this );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
pcbframe->GetToolManager()->RunAction( PCB_ACTIONS::selectionClear, true );
BOARD_COMMIT commit( pcbframe );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
pcbframe->Exchange_Module( source_module, newmodule, commit );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
commit.Push( wxT( "Update module" ) );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
commit.Add( newmodule );
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
commit.Push( wxT( "Insert module" ) );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
// @todo LEGACY should be unnecessary
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
void FOOTPRINT_EDIT_FRAME::ProcessPreferences( wxCommandEvent& event )
{
int id = event.GetId();
switch( id )
{
// Hotkey IDs
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Module_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Module_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Module_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for the footprint editor.
DisplayHotkeyList( this, g_Module_Editor_Hokeys_Descr );
break;
case ID_PCB_LIB_WIZARD:
case ID_PCB_LIB_TABLE_EDIT:
{
bool tableChanged = false;
int r = 0;
if( id == ID_PCB_LIB_TABLE_EDIT )
r = InvokePcbLibTableEditor( this, &GFootprintTable, Prj().PcbFootprintLibs() );
else
r = InvokeFootprintWizard( this, &GFootprintTable, Prj().PcbFootprintLibs() );
if( r & 1 )
{
try
{
FILE_OUTPUTFORMATTER sf( FP_LIB_TABLE::GetGlobalTableFileName() );
GFootprintTable.Format( &sf, 0 );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving the global footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText.GetData() )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
if( r & 2 )
{
wxString tblName = Prj().FootprintLibTblName();
try
{
Prj().PcbFootprintLibs()->Save( tblName );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving project specific footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
FOOTPRINT_VIEWER_FRAME* viewer;
viewer = (FOOTPRINT_VIEWER_FRAME*)Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( tableChanged && viewer != NULL )
viewer->ReCreateLibraryList();
}
break;
case wxID_PREFERENCES:
InvokeFPEditorPrefsDlg( this );
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessPreferences error" ) );
}
}
void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
m_show_layer_manager_tools = ! m_show_layer_manager_tools;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_("Hide &Layers Manager" ) : _("Show &Layers Manager" ));
break;
case ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR:
m_show_microwave_tools = ! m_show_microwave_tools;
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR,
m_show_microwave_tools ?
_( "Hide Microwave Toolbar" ): _( "Show Microwave Toolbar" ));
break;
case ID_PCB_LAYERS_SETUP:
if( InvokeLayerSetup( this, GetBoard() ) )
{
LAYER_ID cur_layer = GetActiveLayer();
// If after showing the dialog the user has removed the active layer,
// then select a new active layer (front copper layer).
if( !GetBoard()->GetEnabledLayers()[ cur_layer ] )
cur_layer = F_Cu;
SetActiveLayer( cur_layer );
OnModify();
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
}
break;
case ID_PCB_LIB_WIZARD:
case ID_PCB_LIB_TABLE_EDIT:
{
bool tableChanged = false;
int r = 0;
if( id == ID_PCB_LIB_TABLE_EDIT )
r = InvokePcbLibTableEditor( this, &GFootprintTable, Prj().PcbFootprintLibs() );
else
r = InvokeFootprintWizard( this, &GFootprintTable, Prj().PcbFootprintLibs() );
if( r & 1 )
{
try
{
FILE_OUTPUTFORMATTER sf( FP_LIB_TABLE::GetGlobalTableFileName() );
GFootprintTable.Format( &sf, 0 );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving the global footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText.GetData() )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
// If no board file is defined, do not save the project specific library table. It
// is kept in memory and created in the path when the new board is saved.
if( (r & 2) && !GetBoard()->GetFileName().IsEmpty() )
{
wxString tblName = Prj().FootprintLibTblName();
try
{
Prj().PcbFootprintLibs()->Save( tblName );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving project specific footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
FOOTPRINT_VIEWER_FRAME* viewer;
if( tableChanged && (viewer = (FOOTPRINT_VIEWER_FRAME*)Kiway().Player( FRAME_PCB_MODULE_VIEWER, false )) != NULL )
{
viewer->ReCreateLibraryList();
}
}
break;
case ID_PCB_3DSHAPELIB_WIZARD:
#ifdef BUILD_GITHUB_PLUGIN
Invoke3DShapeLibsDownloaderWizard( this );
#endif
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
if( dlg.ShowModal() == 1 && IsGalCanvasActive() )
{
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
module->ViewUpdate();
GetGalCanvas()->Refresh();
}
}
break;
case wxID_PREFERENCES:
{
DIALOG_GENERALOPTIONS dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings( true );
break;
case ID_CONFIG_READ:
{
fn = GetBoard()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg = wxString::Format( _(
"File %s not found" ),
GetChars( dlg.GetPath() )
);
DisplayError( this, msg );
break;
}
wxString pro_file = dlg.GetPath();
Prj().ConfigLoad( Kiface().KifaceSearch(), GROUP_PCB, GetProjectFileParameters(), pro_file );
}
break;
// Hotkey IDs
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for Pcbnew.
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::Process_Config error" ) );
}
}
void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
m_show_layer_manager_tools = ! m_show_layer_manager_tools;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_("Hide &Layers Manager" ) : _("Show &Layers Manager" ));
break;
case ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR:
m_show_microwave_tools = ! m_show_microwave_tools;
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR,
m_show_microwave_tools ?
_( "Hide Microwave Toolbar" ): _( "Show Microwave Toolbar" ));
break;
case ID_PCB_LAYERS_SETUP:
InstallDialogLayerSetup();
break;
case ID_PCB_LIB_TABLE_EDIT:
{
bool tableChanged = false;
int r = InvokePcbLibTableEditor( this, &GFootprintTable, FootprintLibs() );
if( r & 1 )
{
try
{
FILE_OUTPUTFORMATTER sf( FP_LIB_TABLE::GetGlobalTableFileName() );
GFootprintTable.Format( &sf, 0 );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving the global footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText.GetData() )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
// If no board file is defined, do not save the project specific library table. It
// is kept in memory and created in the path when the new board is saved.
if( (r & 2) && !GetBoard()->GetFileName().IsEmpty() )
{
wxString tblName = Prj().FootprintLibTblName();
try
{
FootprintLibs()->Save( tblName );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving project specific footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
FOOTPRINT_VIEWER_FRAME* viewer;
if( tableChanged && (viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( this )) != NULL )
{
viewer->ReCreateLibraryList();
}
}
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
dlg.ShowModal();
}
break;
case wxID_PREFERENCES:
{
DIALOG_GENERALOPTIONS dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings( true );
break;
case ID_CONFIG_READ:
{
fn = GetBoard()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg;
msg.Printf( _( "File %s not found" ), GetChars( dlg.GetPath() ) );
DisplayError( this, msg );
break;
}
LoadProjectSettings( dlg.GetPath() );
}
break;
// Hotkey IDs
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for Pcbnew.
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
// Macros IDs
case ID_PREFRENCES_MACROS_SAVE:
SaveMacros();
break;
case ID_PREFRENCES_MACROS_READ:
ReadMacros();
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::Process_Config error" ) );
}
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
LAYER_NUM itmp;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
m_canvas->CrossHairOff( &dc );
switch( id ) // Some (not all ) edit commands must be finished or aborted
{
case wxID_CUT:
case wxID_COPY:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_FLIP_TEXTEPCB:
case ID_POPUP_PCB_COPY_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_BEGIN_TRACK:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_MICROVIA:
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
case ID_POPUP_PCB_FILL_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
case ID_POPUP_PCB_ADD_ZONE_CORNER:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_FLIP_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_EDIT_DRAWING:
case ID_POPUP_PCB_GETINFO_MARKER:
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
}
// Should not be executed, just in case
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );
break;
default: // Finish (abort) the command
if( m_canvas->IsMouseCaptured() )
m_canvas->CallEndMouseCapture( &dc );
if( GetToolId() != id )
{
if( m_lastDrawToolId != GetToolId() )
m_lastDrawToolId = GetToolId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
}
switch( id ) // Execute command
{
case 0:
break;
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != editor )
editor->SetFocus();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame( wxDefaultPosition );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_FLIP_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_DRC_CONTROL:
m_drc->ShowDialog();
break;
case ID_GET_NETLIST:
InstallNetlistFrame( &dc );
break;
case ID_FIND_ITEMS:
InstallFindFrame();
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_END_LINE:
m_canvas->MoveCursorToCrossHair();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if( GetCurItem() == NULL )
break;
Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if( GetCurItem() == NULL )
break;
Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
if( GetCurItem() == NULL )
break;
{
int type = GetCurItem()->Type();
if( type == PCB_TRACE_T || type == PCB_VIA_T )
{
BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
dlg.ShowModal();
}
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_BEGIN_TRACK:
m_canvas->MoveCursorToCrossHair();
OnHotkeyBeginRoute( &dc );
break;
case ID_POPUP_PCB_END_TRACK:
m_canvas->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
break;
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
* If a track is in progress, it will be redrawn
*/
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
g_Alternate_Track_Posture = !g_Alternate_Track_Posture;
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
if( !IsMicroViaAcceptable() )
break;
// fall through
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
else
{
BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
VIATYPE_T v_type = settings.m_CurrentViaType;
switch( id )
{
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
settings.m_CurrentViaType = VIA_BLIND_BURIED;
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
settings.m_CurrentViaType = VIA_MICROVIA;
break;
default:
settings.m_CurrentViaType = VIA_THROUGH;
break;
}
// place via and switch layer.
if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
{
m_canvas->SetIgnoreMouseEvents( true );
wxPoint dlgPosition;
wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
dlgPosition );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
if( getActiveLayer() != layer )
{
GetScreen()->m_Route_Layer_TOP = getActiveLayer();
GetScreen()->m_Route_Layer_BOTTOM = layer;
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
}
}
else
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
Delete_Track( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
m_canvas->MoveCursorToCrossHair();
Delete_net( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() == NULL )
break;
{
SEGZONE* zsegm = (SEGZONE*) GetCurItem();
int netcode = zsegm->GetNetCode();
Delete_OldZone_Fill( zsegm );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
OnModify();
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL ); // Outlines can have changed
break;
case ID_POPUP_PCB_ZONE_DUPLICATE:
{
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
duplicateZone( &dc, zone );
}
break;
case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
m_canvas->MoveCursorToCrossHair();
{
int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_DELETE_ZONE_CORNER:
Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
break;
}
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
break;
}
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Outlines( &dc, zone_cont );
break;
}
case ID_POPUP_PCB_ADD_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
wxPoint pos = GetCrossHairPosition();
/* add corner between zone_cont->m_CornerSelection
* and zone_cont->m_CornerSelection+1
* and start move the new corner
*/
zone_cont->Draw( m_canvas, &dc, GR_XOR );
zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
zone_cont->Draw( m_canvas, &dc, GR_XOR );
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
break;
}
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
m_canvas->SetAutoPanRequest( false );
break;
}
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
zone_container->UnFill();
TestNetConnection( NULL, zone_container->GetNetCode() );
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
GetBoard()->m_Zone.DeleteAll(); // remove zone segments used to fill zones.
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
// Remove filled areas in zone
ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
zone_container->ClearFilledPolysList();
}
SetCurItem( NULL ); // CurItem might be deleted by this command, clear the pointer
TestConnections();
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
m_canvas->MoveCursorToCrossHair();
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
if( GetCurItem() == NULL )
break;
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
SetCrossHairPosition( module->GetPosition() );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
break;
case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST: // get module by name and move it
SetCurItem( GetModuleByName() );
module = (MODULE*) GetCurItem();
if( module == NULL )
break;
if( module->IsLocked() )
{
wxString msg = wxString::Format(
_( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, false );
break;
case ID_POPUP_PCB_DELETE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
{
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple flip, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );
Change_Side_Module( (MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
if( GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
OnModify();
}
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
DeletePad( (D_PAD*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_RESET_TEXT_SIZE:
ResetTextSize( GetCurItem(), &dc );
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
&dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer( getActiveLayer() );
if( itmp >= 0 )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
{
m_canvas->Refresh();
}
setActiveLayer( itmp );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
m_canvas->MoveCursorToCrossHair();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
setActiveLayer( m_SelLayerBox->GetLayerSelection() );
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh( true );
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_TEXTEPCB:
CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_FLIP_TEXTEPCB:
FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MIRE:
ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MIRE:
m_canvas->MoveCursorToCrossHair();
DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_DELETE_DIMENSION:
m_canvas->MoveCursorToCrossHair();
DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_EDIT_DIMENSION:
ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MARKER:
RemoveStruct( GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_GETINFO_MARKER:
if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
if( GetCurItem()->GetFlags() != 0 )
break;
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
// #1277772 - Draw into dialog converted in refresh request
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
m_canvas->Refresh();
#endif
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
m_canvas->MoveCursorToCrossHair();
Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( End_Zone( &dc ) )
SetCurItem( NULL );
}
m_canvas->SetAutoPanRequest( false );
break;
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( Delete_LastCreatedCorner( &dc ) == 0 ) // No more segment in outline,
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
m_canvas->MoveCursorToCrossHair();
Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_BREAK_TRACK:
m_canvas->MoveCursorToCrossHair();
{
TRACK* track = (TRACK*) GetScreen()->GetCurItem();
wxPoint pos = GetCrossHairPosition();
track->Draw( m_canvas, &dc, GR_XOR );
PICKED_ITEMS_LIST itemsListPicker;
TRACK* newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );
SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
track->Draw( m_canvas, &dc, GR_XOR );
newtrack->Draw( m_canvas, &dc, GR_XOR );
// compute the new ratsnest, because connectivity could change
TestNetConnection( &dc, track->GetNetCode() );
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb();
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers( event );
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxConfigBase* cfg = Pgm().CommonSettings();
cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
ArchiveModulesOnBoard( true );
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
ArchiveModulesOnBoard( false );
break;
case ID_GEN_IMPORT_DXF_FILE:
InvokeDXFDialogImport( this );
m_canvas->Refresh();
break;
default:
wxString msg;
msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
id );
DisplayError( this, msg );
break;
}
m_canvas->CrossHairOn( &dc );
m_canvas->SetIgnoreMouseEvents( false );
}
wxWindow* CreateWindow( wxWindow* aParent, int aClassId, KIWAY* aKiway, int aCtlBits = 0 )
{
switch( aClassId )
{
case FRAME_PCB:
{
PCB_EDIT_FRAME* frame = new PCB_EDIT_FRAME( aKiway, aParent );
frame->Zoom_Automatique( true );
#if defined(KICAD_SCRIPTING)
// give the scripting helpers access to our frame
ScriptingSetPcbEditFrame( frame );
#endif
if( Kiface().IsSingle() )
{
// only run this under single_top, not under a project manager.
CreateServer( frame, KICAD_PCB_PORT_SERVICE_NUMBER );
}
return frame;
}
break;
case FRAME_PCB_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* frame = new FOOTPRINT_EDIT_FRAME( aKiway, aParent );
frame->Zoom_Automatique( true );
/* Read a default config file in case no project given on command line.
frame->LoadProjectFile( wxEmptyString, true );
*/
return frame;
}
break;
case FRAME_PCB_MODULE_VIEWER:
case FRAME_PCB_MODULE_VIEWER_MODAL:
{
FOOTPRINT_VIEWER_FRAME* frame = new FOOTPRINT_VIEWER_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
frame->Zoom_Automatique( true );
/* Read a default config file in case no project given on command line.
frame->LoadProjectFile( wxEmptyString, true );
*/
return frame;
}
break;
case FRAME_PCB_FOOTPRINT_WIZARD_MODAL:
{
FOOTPRINT_WIZARD_FRAME* frame = new FOOTPRINT_WIZARD_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
return frame;
}
break;
default:
;
}
return NULL;
}