void RenderFlowThread::paintFlowThreadPortionInRegion(PaintInfo& paintInfo, RenderRegion* region, LayoutRect flowThreadPortionRect, LayoutRect flowThreadPortionOverflowRect, const LayoutPoint& paintOffset) const
{
GraphicsContext* context = paintInfo.context;
if (!context)
return;
// Adjust the clipping rect for the region.
// paintOffset contains the offset where the painting should occur
// adjusted with the region padding and border.
LayoutRect regionClippingRect = computeRegionClippingRect(paintOffset, flowThreadPortionRect, flowThreadPortionOverflowRect);
PaintInfo info(paintInfo);
info.rect.intersect(pixelSnappedIntRect(regionClippingRect));
if (!info.rect.isEmpty()) {
context->save();
context->clip(regionClippingRect);
// RenderFlowThread should start painting its content in a position that is offset
// from the region rect's current position. The amount of offset is equal to the location of
// the flow thread portion in the flow thread's local coordinates.
IntPoint renderFlowThreadOffset;
if (style()->isFlippedBlocksWritingMode()) {
LayoutRect flippedFlowThreadPortionRect(flowThreadPortionRect);
flipForWritingMode(flippedFlowThreadPortionRect);
renderFlowThreadOffset = roundedIntPoint(paintOffset - flippedFlowThreadPortionRect.location());
} else
renderFlowThreadOffset = roundedIntPoint(paintOffset - flowThreadPortionRect.location());
context->translate(renderFlowThreadOffset.x(), renderFlowThreadOffset.y());
info.rect.moveBy(-renderFlowThreadOffset);
layer()->paint(context, info.rect, 0, 0, region, RenderLayer::PaintLayerTemporaryClipRects);
context->restore();
}
}
static void mapCaretRectToCaretPainter(LayoutItem caretLayoutItem,
LayoutBlockItem caretPainterItem,
LayoutRect& caretRect) {
// FIXME: This shouldn't be called on un-rooted subtrees.
// FIXME: This should probably just use mapLocalToAncestor.
// Compute an offset between the caretLayoutItem and the caretPainterItem.
DCHECK(caretLayoutItem.isDescendantOf(caretPainterItem));
bool unrooted = false;
while (caretLayoutItem != caretPainterItem) {
LayoutItem containerItem = caretLayoutItem.container();
if (containerItem.isNull()) {
unrooted = true;
break;
}
caretRect.move(caretLayoutItem.offsetFromContainer(containerItem));
caretLayoutItem = containerItem;
}
if (unrooted)
caretRect = LayoutRect();
}
void RenderMultiColumnSet::repaintFlowThreadContent(const LayoutRect& repaintRect, bool immediate) const
{
// Figure out the start and end columns and only check within that range so that we don't walk the
// entire column set. Put the repaint rect into flow thread coordinates by flipping it first.
LayoutRect flowThreadRepaintRect(repaintRect);
flowThread()->flipForWritingMode(flowThreadRepaintRect);
// Now we can compare this rect with the flow thread portions owned by each column. First let's
// just see if the repaint rect intersects our flow thread portion at all.
LayoutRect clippedRect(flowThreadRepaintRect);
clippedRect.intersect(RenderRegion::flowThreadPortionOverflowRect());
if (clippedRect.isEmpty())
return;
// Now we know we intersect at least one column. Let's figure out the logical top and logical
// bottom of the area we're repainting.
LayoutUnit repaintLogicalTop = isHorizontalWritingMode() ? flowThreadRepaintRect.y() : flowThreadRepaintRect.x();
LayoutUnit repaintLogicalBottom = (isHorizontalWritingMode() ? flowThreadRepaintRect.maxY() : flowThreadRepaintRect.maxX()) - 1;
unsigned startColumn = columnIndexAtOffset(repaintLogicalTop);
unsigned endColumn = columnIndexAtOffset(repaintLogicalBottom);
LayoutUnit colGap = columnGap();
unsigned colCount = columnCount();
for (unsigned i = startColumn; i <= endColumn; i++) {
LayoutRect colRect = columnRectAt(i);
// Get the portion of the flow thread that corresponds to this column.
LayoutRect flowThreadPortion = flowThreadPortionRectAt(i);
// Now get the overflow rect that corresponds to the column.
LayoutRect flowThreadOverflowPortion = flowThreadPortionOverflowRect(flowThreadPortion, i, colCount, colGap);
// Do a repaint for this specific column.
repaintFlowThreadContentRectangle(repaintRect, immediate, flowThreadPortion, flowThreadOverflowPortion, colRect.location());
}
}
void RenderTextControlSingleLine::paint(PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
RenderTextControl::paint(paintInfo, paintOffset);
if (paintInfo.phase == PaintPhaseBlockBackground && m_shouldDrawCapsLockIndicator) {
LayoutRect contentsRect = contentBoxRect();
// Center in the block progression direction.
if (isHorizontalWritingMode())
contentsRect.setY((height() - contentsRect.height()) / 2);
else
contentsRect.setX((width() - contentsRect.width()) / 2);
// Convert the rect into the coords used for painting the content
contentsRect.moveBy(paintOffset + location());
theme().paintCapsLockIndicator(*this, paintInfo, snappedIntRect(contentsRect));
}
}
static FloatRect localQuadForTextBox(const InlineTextBox& box, unsigned start, unsigned end, bool useSelectionHeight)
{
unsigned realEnd = std::min(box.end() + 1, end);
LayoutRect boxSelectionRect = box.localSelectionRect(start, realEnd);
if (!boxSelectionRect.height())
return FloatRect();
if (useSelectionHeight)
return boxSelectionRect;
// Change the height and y position (or width and x for vertical text)
// because selectionRect uses selection-specific values.
if (box.isHorizontal()) {
boxSelectionRect.setHeight(box.height());
boxSelectionRect.setY(box.y());
} else {
boxSelectionRect.setWidth(box.width());
boxSelectionRect.setX(box.x());
}
return boxSelectionRect;
}
LayoutRect RootFrameViewport::scrollIntoView(const LayoutRect& rectInContent, const ScrollAlignment& alignX, const ScrollAlignment& alignY)
{
// We want to move the rect into the viewport that excludes the scrollbars so we intersect
// the visual viewport with the scrollbar-excluded frameView content rect. However, we don't
// use visibleContentRect directly since it floors the scroll position. Instead, we use
// FrameView::scrollPositionDouble and construct a LayoutRect from that (the FrameView size
// is always integer sized.
LayoutRect frameRectInContent = LayoutRect(
layoutViewport().scrollPositionDouble(),
layoutViewport().visibleContentRect().size());
LayoutRect visualRectInContent = LayoutRect(
layoutViewport().scrollPositionDouble() + toDoubleSize(visualViewport().scrollPositionDouble()),
visualViewport().visibleContentRect().size());
LayoutRect viewRectInContent = intersection(visualRectInContent, frameRectInContent);
LayoutRect targetViewport =
ScrollAlignment::getRectToExpose(viewRectInContent, rectInContent, alignX, alignY);
// visualViewport.scrollIntoView will attempt to center the given rect within the viewport
// so to prevent it from adjusting r's coordinates the rect must match the viewport's size
// i.e. add the subtracted scrollbars from above back in.
// FIXME: This is hacky and required because getRectToExpose doesn't naturally account
// for the two viewports. crbug.com/449340.
targetViewport.setSize(LayoutSize(visualViewport().visibleContentRect().size()));
// Snap the visible rect to layout units to match the calculated target viewport rect.
FloatRect visible =
LayoutRect(visualViewport().scrollPositionDouble(), visualViewport().visibleContentRect().size());
float centeringOffsetX = (visible.width() - targetViewport.width()) / 2;
float centeringOffsetY = (visible.height() - targetViewport.height()) / 2;
DoublePoint targetOffset(
targetViewport.x() - centeringOffsetX,
targetViewport.y() - centeringOffsetY);
setScrollPosition(targetOffset, ProgrammaticScroll);
// RootFrameViewport only changes the viewport relative to the document so we can't change the input
// rect's location relative to the document origin.
return rectInContent;
}
static void adjustBubblePosition(const LayoutRect& hostRect, HTMLElement* bubble)
{
ASSERT(bubble);
if (hostRect.isEmpty())
return;
double hostX = hostRect.x();
double hostY = hostRect.y();
if (RenderBox* container = bubble->renderer()->containingBlock()) {
FloatPoint containerLocation = container->localToAbsolute();
hostX -= containerLocation.x() + container->borderLeft();
hostY -= containerLocation.y() + container->borderTop();
}
bubble->getInlineStyleDecl()->setProperty(CSSPropertyTop, hostY + hostRect.height(), CSSPrimitiveValue::CSS_PX);
// The 'left' value of ::-webkit-validation-bubble-arrow.
const int bubbleArrowTopOffset = 32;
double bubbleX = hostX;
if (hostRect.width() / 2 < bubbleArrowTopOffset)
bubbleX = max(hostX + hostRect.width() / 2 - bubbleArrowTopOffset, 0.0);
bubble->getInlineStyleDecl()->setProperty(CSSPropertyLeft, bubbleX, CSSPrimitiveValue::CSS_PX);
}
void RenderVideo::paintReplaced(PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
MediaPlayer* mediaPlayer = videoElement().player();
bool displayingPoster = videoElement().shouldDisplayPosterImage();
Page* page = frame().page();
if (!displayingPoster && !mediaPlayer) {
if (page && paintInfo.phase == PaintPhaseForeground)
page->addRelevantUnpaintedObject(this, visualOverflowRect());
return;
}
LayoutRect rect = videoBox();
if (rect.isEmpty()) {
if (page && paintInfo.phase == PaintPhaseForeground)
page->addRelevantUnpaintedObject(this, visualOverflowRect());
return;
}
rect.moveBy(paintOffset);
if (page && paintInfo.phase == PaintPhaseForeground)
page->addRelevantRepaintedObject(this, rect);
LayoutRect contentRect = contentBoxRect();
contentRect.moveBy(paintOffset);
GraphicsContext& context = paintInfo.context();
bool clip = !contentRect.contains(rect);
GraphicsContextStateSaver stateSaver(context, clip);
if (clip)
context.clip(contentRect);
if (displayingPoster)
paintIntoRect(context, rect);
else if (!videoElement().isFullscreen() || !mediaPlayer->supportsAcceleratedRendering()) {
if (view().frameView().paintBehavior() & PaintBehaviorFlattenCompositingLayers)
mediaPlayer->paintCurrentFrameInContext(context, rect);
else
mediaPlayer->paint(context, rect);
}
}
void BlockFlowPainter::paintSelection(const PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
ASSERT(paintInfo.phase == PaintPhaseForeground);
if (!m_layoutBlockFlow.shouldPaintSelectionGaps())
return;
LayoutUnit lastTop = 0;
LayoutUnit lastLeft = m_layoutBlockFlow.logicalLeftSelectionOffset(&m_layoutBlockFlow, lastTop);
LayoutUnit lastRight = m_layoutBlockFlow.logicalRightSelectionOffset(&m_layoutBlockFlow, lastTop);
LayoutRect bounds = m_layoutBlockFlow.visualOverflowRect();
bounds.moveBy(paintOffset);
// Only create a DrawingRecorder and ClipScope if skipRecording is false. This logic is needed
// because selectionGaps(...) needs to be called even when we do not record.
bool skipRecording = LayoutObjectDrawingRecorder::useCachedDrawingIfPossible(paintInfo.context, m_layoutBlockFlow, DisplayItem::SelectionGap, paintOffset);
Optional<LayoutObjectDrawingRecorder> drawingRecorder;
Optional<ClipScope> clipScope;
if (!skipRecording) {
drawingRecorder.emplace(paintInfo.context, m_layoutBlockFlow, DisplayItem::SelectionGap, FloatRect(bounds), paintOffset);
clipScope.emplace(paintInfo.context);
}
LayoutRect gapRectsBounds = m_layoutBlockFlow.selectionGaps(&m_layoutBlockFlow, paintOffset, LayoutSize(), lastTop, lastLeft, lastRight,
skipRecording ? nullptr : &paintInfo,
skipRecording ? nullptr : &(*clipScope));
// TODO(wkorman): Rework below to process paint invalidation rects during layout rather than paint.
if (!gapRectsBounds.isEmpty()) {
PaintLayer* layer = m_layoutBlockFlow.enclosingLayer();
gapRectsBounds.moveBy(-paintOffset);
if (!m_layoutBlockFlow.hasLayer()) {
LayoutRect localBounds(gapRectsBounds);
m_layoutBlockFlow.flipForWritingMode(localBounds);
gapRectsBounds = LayoutRect(m_layoutBlockFlow.localToAncestorQuad(FloatRect(localBounds), layer->layoutObject()).enclosingBoundingBox());
if (layer->layoutObject()->hasOverflowClip())
gapRectsBounds.move(layer->layoutBox()->scrolledContentOffset());
}
layer->addBlockSelectionGapsBounds(gapRectsBounds);
}
}
LayoutRect InlineTextBox::localSelectionRect(int startPos, int endPos)
{
int sPos = max(startPos - m_start, 0);
int ePos = min(endPos - m_start, (int)m_len);
if (sPos > ePos)
return LayoutRect();
FontCachePurgePreventer fontCachePurgePreventer;
LayoutUnit selTop = selectionTop();
LayoutUnit selHeight = selectionHeight();
RenderStyle* styleToUse = textRenderer().style(isFirstLineStyle());
const Font& font = styleToUse->font();
StringBuilder charactersWithHyphen;
bool respectHyphen = ePos == m_len && hasHyphen();
TextRun textRun = constructTextRun(styleToUse, font, respectHyphen ? &charactersWithHyphen : 0);
FloatPoint startingPoint = FloatPoint(logicalLeft(), selTop.toFloat());
LayoutRect r;
if (sPos || ePos != static_cast<int>(m_len))
r = enclosingIntRect(font.selectionRectForText(textRun, startingPoint, selHeight, sPos, ePos));
else // Avoid computing the font width when the entire line box is selected as an optimization.
r = enclosingIntRect(FloatRect(startingPoint, FloatSize(m_logicalWidth, selHeight.toFloat())));
LayoutUnit logicalWidth = r.width();
if (r.x() > logicalRight())
logicalWidth = 0;
else if (r.maxX() > logicalRight())
logicalWidth = logicalRight() - r.x();
LayoutPoint topPoint = isHorizontal() ? LayoutPoint(r.x(), selTop) : LayoutPoint(selTop, r.x());
LayoutUnit width = isHorizontal() ? logicalWidth : selHeight;
LayoutUnit height = isHorizontal() ? selHeight : logicalWidth;
return LayoutRect(topPoint, LayoutSize(width, height));
}
void LayoutTextControlSingleLine::paint(const PaintInfo& paintInfo, const LayoutPoint& paintOffset) const
{
LayoutTextControl::paint(paintInfo, paintOffset);
if (shouldPaintSelfBlockBackground(paintInfo.phase) && m_shouldDrawCapsLockIndicator) {
if (LayoutObjectDrawingRecorder::useCachedDrawingIfPossible(paintInfo.context, *this, paintInfo.phase, paintOffset))
return;
LayoutRect contentsRect = contentBoxRect();
// Center in the block progression direction.
if (isHorizontalWritingMode())
contentsRect.setY((size().height() - contentsRect.height()) / 2);
else
contentsRect.setX((size().width() - contentsRect.width()) / 2);
// Convert the rect into the coords used for painting the content
contentsRect.moveBy(paintOffset + location());
IntRect snappedRect = pixelSnappedIntRect(contentsRect);
LayoutObjectDrawingRecorder recorder(paintInfo.context, *this, paintInfo.phase, snappedRect, paintOffset);
LayoutTheme::theme().painter().paintCapsLockIndicator(*this, paintInfo, snappedRect);
}
}
static void buildRendererHighlight(RenderObject* renderer, RenderRegion* region, const HighlightConfig& highlightConfig, Highlight* highlight, InspectorOverlay::CoordinateSystem coordinateSystem)
{
Frame* containingFrame = renderer->document().frame();
if (!containingFrame)
return;
highlight->setDataFromConfig(highlightConfig);
FrameView* containingView = containingFrame->view();
FrameView* mainView = containingFrame->page()->mainFrame().view();
// RenderSVGRoot should be highlighted through the isBox() code path, all other SVG elements should just dump their absoluteQuads().
bool isSVGRenderer = renderer->node() && renderer->node()->isSVGElement() && !renderer->isSVGRoot();
if (isSVGRenderer) {
highlight->type = HighlightTypeRects;
renderer->absoluteQuads(highlight->quads);
for (size_t i = 0; i < highlight->quads.size(); ++i)
contentsQuadToCoordinateSystem(mainView, containingView, highlight->quads[i], coordinateSystem);
} else if (renderer->isBox() || renderer->isRenderInline()) {
LayoutRect contentBox;
LayoutRect paddingBox;
LayoutRect borderBox;
LayoutRect marginBox;
if (renderer->isBox()) {
RenderBox* renderBox = toRenderBox(renderer);
LayoutBoxExtent margins(renderBox->marginTop(), renderBox->marginRight(), renderBox->marginBottom(), renderBox->marginLeft());
if (!renderBox->isOutOfFlowPositioned() && region) {
RenderBox::LogicalExtentComputedValues computedValues;
renderBox->computeLogicalWidthInRegion(computedValues, region);
margins.mutableLogicalLeft(renderBox->style().writingMode()) = computedValues.m_margins.m_start;
margins.mutableLogicalRight(renderBox->style().writingMode()) = computedValues.m_margins.m_end;
}
paddingBox = renderBox->clientBoxRectInRegion(region);
contentBox = LayoutRect(paddingBox.x() + renderBox->paddingLeft(), paddingBox.y() + renderBox->paddingTop(),
paddingBox.width() - renderBox->paddingLeft() - renderBox->paddingRight(), paddingBox.height() - renderBox->paddingTop() - renderBox->paddingBottom());
borderBox = LayoutRect(paddingBox.x() - renderBox->borderLeft(), paddingBox.y() - renderBox->borderTop(),
paddingBox.width() + renderBox->borderLeft() + renderBox->borderRight(), paddingBox.height() + renderBox->borderTop() + renderBox->borderBottom());
marginBox = LayoutRect(borderBox.x() - margins.left(), borderBox.y() - margins.top(),
borderBox.width() + margins.left() + margins.right(), borderBox.height() + margins.top() + margins.bottom());
} else {
RenderInline* renderInline = toRenderInline(renderer);
// RenderInline's bounding box includes paddings and borders, excludes margins.
borderBox = renderInline->linesBoundingBox();
paddingBox = LayoutRect(borderBox.x() + renderInline->borderLeft(), borderBox.y() + renderInline->borderTop(),
borderBox.width() - renderInline->borderLeft() - renderInline->borderRight(), borderBox.height() - renderInline->borderTop() - renderInline->borderBottom());
contentBox = LayoutRect(paddingBox.x() + renderInline->paddingLeft(), paddingBox.y() + renderInline->paddingTop(),
paddingBox.width() - renderInline->paddingLeft() - renderInline->paddingRight(), paddingBox.height() - renderInline->paddingTop() - renderInline->paddingBottom());
// Ignore marginTop and marginBottom for inlines.
marginBox = LayoutRect(borderBox.x() - renderInline->marginLeft(), borderBox.y(),
borderBox.width() + renderInline->horizontalMarginExtent(), borderBox.height());
}
FloatQuad absContentQuad;
FloatQuad absPaddingQuad;
FloatQuad absBorderQuad;
FloatQuad absMarginQuad;
if (region) {
RenderFlowThread* flowThread = region->flowThread();
// Figure out the quads in the space of the RenderFlowThread.
absContentQuad = renderer->localToContainerQuad(FloatRect(contentBox), flowThread);
absPaddingQuad = renderer->localToContainerQuad(FloatRect(paddingBox), flowThread);
absBorderQuad = renderer->localToContainerQuad(FloatRect(borderBox), flowThread);
absMarginQuad = renderer->localToContainerQuad(FloatRect(marginBox), flowThread);
// Move the quad relative to the space of the current region.
LayoutRect flippedRegionRect(region->flowThreadPortionRect());
flowThread->flipForWritingMode(flippedRegionRect);
FloatSize delta = region->contentBoxRect().location() - flippedRegionRect.location();
absContentQuad.move(delta);
absPaddingQuad.move(delta);
absBorderQuad.move(delta);
absMarginQuad.move(delta);
// Resolve the absolute quads starting from the current region.
absContentQuad = region->localToAbsoluteQuad(absContentQuad);
absPaddingQuad = region->localToAbsoluteQuad(absPaddingQuad);
absBorderQuad = region->localToAbsoluteQuad(absBorderQuad);
absMarginQuad = region->localToAbsoluteQuad(absMarginQuad);
} else {
absContentQuad = renderer->localToAbsoluteQuad(FloatRect(contentBox));
absPaddingQuad = renderer->localToAbsoluteQuad(FloatRect(paddingBox));
absBorderQuad = renderer->localToAbsoluteQuad(FloatRect(borderBox));
absMarginQuad = renderer->localToAbsoluteQuad(FloatRect(marginBox));
}
contentsQuadToCoordinateSystem(mainView, containingView, absContentQuad, coordinateSystem);
contentsQuadToCoordinateSystem(mainView, containingView, absPaddingQuad, coordinateSystem);
contentsQuadToCoordinateSystem(mainView, containingView, absBorderQuad, coordinateSystem);
contentsQuadToCoordinateSystem(mainView, containingView, absMarginQuad, coordinateSystem);
highlight->type = HighlightTypeNode;
highlight->quads.append(absMarginQuad);
highlight->quads.append(absBorderQuad);
highlight->quads.append(absPaddingQuad);
highlight->quads.append(absContentQuad);
}
}
static PassRefPtr<InspectorObject> buildObjectForRegionHighlight(FrameView* mainView, RenderRegion* region)
{
FrameView* containingView = region->frame().view();
if (!containingView)
return nullptr;
RenderBlockFlow* regionContainer = toRenderBlockFlow(region->parent());
LayoutRect borderBox = regionContainer->borderBoxRect();
borderBox.setWidth(borderBox.width() + regionContainer->verticalScrollbarWidth());
borderBox.setHeight(borderBox.height() + regionContainer->horizontalScrollbarHeight());
// Create incoming and outgoing boxes that we use to chain the regions toghether.
const LayoutSize linkBoxSize(10, 10);
const LayoutSize linkBoxMidpoint(linkBoxSize.width() / 2, linkBoxSize.height() / 2);
LayoutRect incomingRectBox = LayoutRect(borderBox.location() - linkBoxMidpoint, linkBoxSize);
LayoutRect outgoingRectBox = LayoutRect(borderBox.location() - linkBoxMidpoint + borderBox.size(), linkBoxSize);
// Move the link boxes slightly inside the region border box.
LayoutUnit maxUsableHeight = std::max(LayoutUnit(), borderBox.height() - linkBoxMidpoint.height());
LayoutUnit linkBoxVerticalOffset = std::min(LayoutUnit::fromPixel(15), maxUsableHeight);
incomingRectBox.move(0, linkBoxVerticalOffset);
outgoingRectBox.move(0, -linkBoxVerticalOffset);
FloatQuad borderRectQuad = regionContainer->localToAbsoluteQuad(FloatRect(borderBox));
FloatQuad incomingRectQuad = regionContainer->localToAbsoluteQuad(FloatRect(incomingRectBox));
FloatQuad outgoingRectQuad = regionContainer->localToAbsoluteQuad(FloatRect(outgoingRectBox));
contentsQuadToPage(mainView, containingView, borderRectQuad);
contentsQuadToPage(mainView, containingView, incomingRectQuad);
contentsQuadToPage(mainView, containingView, outgoingRectQuad);
RefPtr<InspectorObject> regionObject = InspectorObject::create();
regionObject->setArray("borderQuad", buildArrayForQuad(borderRectQuad));
regionObject->setArray("incomingQuad", buildArrayForQuad(incomingRectQuad));
regionObject->setArray("outgoingQuad", buildArrayForQuad(outgoingRectQuad));
return regionObject.release();
}
LayoutRect LayoutMultiColumnSet::overflowRectForFlowThreadPortion(const LayoutRect& flowThreadPortionRect, bool isFirstPortion, bool isLastPortion) const
{
if (hasOverflowClip())
return flowThreadPortionRect;
LayoutRect flowThreadOverflow = m_flowThread->visualOverflowRect();
// Only clip along the flow thread axis.
LayoutRect clipRect;
if (m_flowThread->isHorizontalWritingMode()) {
LayoutUnit minY = isFirstPortion ? flowThreadOverflow.y() : flowThreadPortionRect.y();
LayoutUnit maxY = isLastPortion ? std::max(flowThreadPortionRect.maxY(), flowThreadOverflow.maxY()) : flowThreadPortionRect.maxY();
LayoutUnit minX = std::min(flowThreadPortionRect.x(), flowThreadOverflow.x());
LayoutUnit maxX = std::max(flowThreadPortionRect.maxX(), flowThreadOverflow.maxX());
clipRect = LayoutRect(minX, minY, maxX - minX, maxY - minY);
} else {
LayoutUnit minX = isFirstPortion ? flowThreadOverflow.x() : flowThreadPortionRect.x();
LayoutUnit maxX = isLastPortion ? std::max(flowThreadPortionRect.maxX(), flowThreadOverflow.maxX()) : flowThreadPortionRect.maxX();
LayoutUnit minY = std::min(flowThreadPortionRect.y(), (flowThreadOverflow.y()));
LayoutUnit maxY = std::max(flowThreadPortionRect.y(), (flowThreadOverflow.maxY()));
clipRect = LayoutRect(minX, minY, maxX - minX, maxY - minY);
}
return clipRect;
}
LayoutRect RenderReplaced::replacedContentRect(const LayoutSize& intrinsicSize) const
{
LayoutRect contentRect = contentBoxRect();
ObjectFit objectFit = style().objectFit();
if (objectFit == ObjectFitFill)
return contentRect;
if (!intrinsicSize.width() || !intrinsicSize.height())
return contentRect;
LayoutRect finalRect = contentRect;
switch (objectFit) {
case ObjectFitContain:
case ObjectFitScaleDown:
case ObjectFitCover:
finalRect.setSize(finalRect.size().fitToAspectRatio(intrinsicSize, objectFit == ObjectFitCover ? AspectRatioFitGrow : AspectRatioFitShrink));
if (objectFit != ObjectFitScaleDown || finalRect.width() <= intrinsicSize.width())
break;
// fall through
case ObjectFitNone:
finalRect.setSize(intrinsicSize);
break;
case ObjectFitFill:
ASSERT_NOT_REACHED();
}
// FIXME: This is where object-position should be taken into account, but since it's not
// implemented yet, assume the initial value of "50% 50%".
LayoutUnit xOffset = (contentRect.width() - finalRect.width()) / 2;
LayoutUnit yOffset = (contentRect.height() - finalRect.height()) / 2;
finalRect.move(xOffset, yOffset);
return finalRect;
}
IntRect::IntRect(const LayoutRect& r)
: m_location(r.x(), r.y())
, m_size(r.width(), r.height())
{
}
void IntersectionObserver::applyRootMargin(LayoutRect& rect) const
{
// TODO(szager): Make sure the spec is clear that left/right margins are resolved against
// width and not height.
LayoutUnit topMargin = computeMargin(m_topMargin, rect.height());
LayoutUnit rightMargin = computeMargin(m_rightMargin, rect.width());
LayoutUnit bottomMargin = computeMargin(m_bottomMargin, rect.height());
LayoutUnit leftMargin = computeMargin(m_leftMargin, rect.width());
rect.setX(rect.x() - leftMargin);
rect.setWidth(rect.width() + leftMargin + rightMargin);
rect.setY(rect.y() - topMargin);
rect.setHeight(rect.height() + topMargin + bottomMargin);
}
LayoutRect RenderNamedFlowFragment::flowThreadPortionRectForClipping(bool isFirstRegionInRange, bool isLastRegionInRange) const
{
// Elements flowed into a region should not be painted past the region's content box
// if they continue to flow into another region in that direction.
// If they do not continue into another region in that direction, they should be
// painted all the way to the region's border box.
// Regions with overflow:hidden will apply clip at the border box, not the content box.
LayoutRect clippingRect = flowThreadPortionRect();
RenderBlockFlow& container = fragmentContainer();
if (container.style().hasPadding()) {
if (isFirstRegionInRange) {
if (flowThread()->isHorizontalWritingMode()) {
clippingRect.move(0, -container.paddingBefore());
clippingRect.expand(0, container.paddingBefore());
} else {
clippingRect.move(-container.paddingBefore(), 0);
clippingRect.expand(container.paddingBefore(), 0);
}
}
if (isLastRegionInRange) {
if (flowThread()->isHorizontalWritingMode())
clippingRect.expand(0, container.paddingAfter());
else
clippingRect.expand(container.paddingAfter(), 0);
}
if (flowThread()->isHorizontalWritingMode()) {
clippingRect.move(-container.paddingStart(), 0);
clippingRect.expand(container.paddingStart() + container.paddingEnd(), 0);
} else {
clippingRect.move(0, -container.paddingStart());
clippingRect.expand(0, container.paddingStart() + container.paddingEnd());
}
}
return clippingRect;
}
void RenderListItem::positionListMarker()
{
if (m_marker && m_marker->parent()->isBox() && !m_marker->isInside() && m_marker->inlineBoxWrapper()) {
LayoutUnit markerOldLogicalLeft = m_marker->logicalLeft();
LayoutUnit blockOffset = 0;
LayoutUnit lineOffset = 0;
for (RenderBox* o = m_marker->parentBox(); o != this; o = o->parentBox()) {
blockOffset += o->logicalTop();
lineOffset += o->logicalLeft();
}
bool adjustOverflow = false;
LayoutUnit markerLogicalLeft;
RootInlineBox& root = m_marker->inlineBoxWrapper()->root();
bool hitSelfPaintingLayer = false;
LayoutUnit lineTop = root.lineTop();
LayoutUnit lineBottom = root.lineBottom();
// FIXME: Need to account for relative positioning in the layout overflow.
if (style()->isLeftToRightDirection()) {
LayoutUnit leftLineOffset = logicalLeftOffsetForLine(blockOffset, logicalLeftOffsetForLine(blockOffset, false), false);
markerLogicalLeft = leftLineOffset - lineOffset - paddingStart() - borderStart() + m_marker->marginStart();
m_marker->inlineBoxWrapper()->adjustLineDirectionPosition((markerLogicalLeft - markerOldLogicalLeft).toFloat());
for (InlineFlowBox* box = m_marker->inlineBoxWrapper()->parent(); box; box = box->parent()) {
LayoutRect newLogicalVisualOverflowRect = box->logicalVisualOverflowRect(lineTop, lineBottom);
LayoutRect newLogicalLayoutOverflowRect = box->logicalLayoutOverflowRect(lineTop, lineBottom);
if (markerLogicalLeft < newLogicalVisualOverflowRect.x() && !hitSelfPaintingLayer) {
newLogicalVisualOverflowRect.setWidth(newLogicalVisualOverflowRect.maxX() - markerLogicalLeft);
newLogicalVisualOverflowRect.setX(markerLogicalLeft);
if (box == root)
adjustOverflow = true;
}
if (markerLogicalLeft < newLogicalLayoutOverflowRect.x()) {
newLogicalLayoutOverflowRect.setWidth(newLogicalLayoutOverflowRect.maxX() - markerLogicalLeft);
newLogicalLayoutOverflowRect.setX(markerLogicalLeft);
if (box == root)
adjustOverflow = true;
}
box->setOverflowFromLogicalRects(newLogicalLayoutOverflowRect, newLogicalVisualOverflowRect, lineTop, lineBottom);
if (box->boxModelObject()->hasSelfPaintingLayer())
hitSelfPaintingLayer = true;
}
} else {
LayoutUnit rightLineOffset = logicalRightOffsetForLine(blockOffset, logicalRightOffsetForLine(blockOffset, false), false);
markerLogicalLeft = rightLineOffset - lineOffset + paddingStart() + borderStart() + m_marker->marginEnd();
m_marker->inlineBoxWrapper()->adjustLineDirectionPosition((markerLogicalLeft - markerOldLogicalLeft).toFloat());
for (InlineFlowBox* box = m_marker->inlineBoxWrapper()->parent(); box; box = box->parent()) {
LayoutRect newLogicalVisualOverflowRect = box->logicalVisualOverflowRect(lineTop, lineBottom);
LayoutRect newLogicalLayoutOverflowRect = box->logicalLayoutOverflowRect(lineTop, lineBottom);
if (markerLogicalLeft + m_marker->logicalWidth() > newLogicalVisualOverflowRect.maxX() && !hitSelfPaintingLayer) {
newLogicalVisualOverflowRect.setWidth(markerLogicalLeft + m_marker->logicalWidth() - newLogicalVisualOverflowRect.x());
if (box == root)
adjustOverflow = true;
}
if (markerLogicalLeft + m_marker->logicalWidth() > newLogicalLayoutOverflowRect.maxX()) {
newLogicalLayoutOverflowRect.setWidth(markerLogicalLeft + m_marker->logicalWidth() - newLogicalLayoutOverflowRect.x());
if (box == root)
adjustOverflow = true;
}
box->setOverflowFromLogicalRects(newLogicalLayoutOverflowRect, newLogicalVisualOverflowRect, lineTop, lineBottom);
if (box->boxModelObject()->hasSelfPaintingLayer())
hitSelfPaintingLayer = true;
}
}
if (adjustOverflow) {
LayoutRect markerRect(LayoutPoint(markerLogicalLeft + lineOffset, blockOffset), m_marker->size());
if (!style()->isHorizontalWritingMode())
markerRect = markerRect.transposedRect();
RenderBox* o = m_marker;
bool propagateVisualOverflow = true;
bool propagateLayoutOverflow = true;
do {
o = o->parentBox();
if (o->isRenderBlock()) {
if (propagateVisualOverflow)
toRenderBlock(o)->addContentsVisualOverflow(markerRect);
if (propagateLayoutOverflow)
toRenderBlock(o)->addLayoutOverflow(markerRect);
}
if (o->hasOverflowClip()) {
propagateLayoutOverflow = false;
propagateVisualOverflow = false;
}
if (o->hasSelfPaintingLayer())
propagateVisualOverflow = false;
markerRect.moveBy(-o->location());
} while (o != this && propagateVisualOverflow && propagateLayoutOverflow);
}
}
}
// Widgets are always placed on integer boundaries, so rounding the size is actually
// the desired behavior. This function is here because it's otherwise seldom what we
// want to do with a LayoutRect.
static inline IntRect roundedIntRect(const LayoutRect& rect)
{
return IntRect(roundedIntPoint(rect.location()), roundedIntSize(rect.size()));
}
TEST_F(VisualRectMappingTest, ContainerFlippedWritingModeAndOverflowScroll) {
setBodyInnerHTML(
"<div id='container' style='writing-mode: vertical-rl; position: "
"absolute; top: 111px; left: 222px;"
" border: solid red; border-width: 10px 20px 30px 40px;"
" overflow: scroll; width: 50px; height: 80px'>"
" <div id='target' style='box-shadow: 40px 20px black; width: 100px; "
"height: 90px'></div>"
" <div style='width: 100px; height: 100px'></div>"
"</div>");
LayoutBlock* container =
toLayoutBlock(getLayoutObjectByElementId("container"));
EXPECT_EQ(LayoutUnit(), container->scrollTop());
// The initial scroll offset is to the left-most because of flipped blocks
// writing mode.
// 150 = total_layout_overflow(100 + 100) - width(50)
EXPECT_EQ(LayoutUnit(150), container->scrollLeft());
container->setScrollTop(LayoutUnit(7));
container->setScrollLeft(
LayoutUnit(142)); // Scroll to the right by 8 pixels.
document().view()->updateAllLifecyclePhases();
LayoutBlock* target = toLayoutBlock(getLayoutObjectByElementId("target"));
LayoutRect targetVisualRect = target->localVisualRect();
// -40 = -box_shadow_offset_x(40) (with target's top-right corner as the
// origin)
// 140 = width(100) + box_shadow_offset_x(40)
// 110 = height(90) + box_shadow_offset_y(20)
EXPECT_EQ(LayoutRect(-40, 0, 140, 110), targetVisualRect);
LayoutRect rect = targetVisualRect;
target->flipForWritingMode(rect);
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(target, rect));
// This rect is in physical coordinates of target.
EXPECT_EQ(LayoutRect(0, 0, 140, 110), rect);
rect = targetVisualRect;
target->flipForWritingMode(rect);
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(container, rect));
rect.move(-container->scrolledContentOffset());
// -2 = target_physical_x(100) + container_border_left(40) - scroll_left(142)
// 3 = target_y(0) + container_border_top(10) - scroll_top(7)
// Rect is clipped by container's overflow clip because of overflow:scroll.
EXPECT_EQ(LayoutRect(-2, 3, 140, 110), rect);
rect = targetVisualRect;
target->flipForWritingMode(rect);
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(&layoutView(), rect));
// (-2, 3, 140, 100) is first clipped by container's overflow clip, to
// (40, 10, 50, 80), then is added by container's offset in LayoutView
// (111, 222).
// TODO(crbug.com/600039): rect.x() should be 262 (left + border-left), but is
// offset
// by extra horizontal border-widths because of layout error.
EXPECT_EQ(LayoutRect(322, 121, 50, 80), rect);
checkPaintInvalidationStateRectMapping(rect, targetVisualRect, *target,
layoutView(), layoutView());
LayoutRect containerVisualRect = container->localVisualRect();
// Because container has overflow clip, its visual overflow doesn't include
// overflow from children.
// 110 = width(50) + border_left_width(40) + border_right_width(20)
// 120 = height(80) + border_top_width(10) + border_bottom_width(30)
EXPECT_EQ(LayoutRect(0, 0, 110, 120), containerVisualRect);
rect = containerVisualRect;
container->flipForWritingMode(rect);
EXPECT_TRUE(container->mapToVisualRectInAncestorSpace(container, rect));
EXPECT_EQ(LayoutRect(0, 0, 110, 120), rect);
rect = containerVisualRect;
container->flipForWritingMode(rect);
EXPECT_TRUE(container->mapToVisualRectInAncestorSpace(&layoutView(), rect));
// TODO(crbug.com/600039): rect.x() should be 222 (left), but is offset by
// extra horizontal
// border-widths because of layout error.
EXPECT_EQ(LayoutRect(282, 111, 110, 120), rect);
checkPaintInvalidationStateRectMapping(rect, containerVisualRect, *container,
layoutView(), layoutView());
}
TEST_F(VisualRectMappingTest, ContainerOverflowScroll) {
setBodyInnerHTML(
"<div id='container' style='position: absolute; top: 111px; left: 222px;"
" border: 10px solid red; overflow: scroll; width: 50px; height: "
"80px;'>"
" <div id='target' style='box-shadow: 40px 20px black; width: 100px; "
"height: 90px'></div>"
"</div>");
LayoutBlock* container =
toLayoutBlock(getLayoutObjectByElementId("container"));
EXPECT_EQ(LayoutUnit(), container->scrollTop());
EXPECT_EQ(LayoutUnit(), container->scrollLeft());
container->setScrollTop(LayoutUnit(7));
container->setScrollLeft(LayoutUnit(8));
document().view()->updateAllLifecyclePhases();
LayoutBlock* target = toLayoutBlock(getLayoutObjectByElementId("target"));
LayoutRect targetVisualRect = target->localVisualRect();
// 140 = width(100) + box_shadow_offset_x(40)
// 110 = height(90) + box_shadow_offset_y(20)
EXPECT_EQ(LayoutRect(0, 0, 140, 110), targetVisualRect);
LayoutRect rect = targetVisualRect;
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(target, rect));
EXPECT_EQ(LayoutRect(0, 0, 140, 110), rect);
rect = targetVisualRect;
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(container, rect));
rect.move(-container->scrolledContentOffset());
// 2 = target_x(0) + container_border_left(10) - scroll_left(8)
// 3 = target_y(0) + container_border_top(10) - scroll_top(7)
// Rect is not clipped by container's overflow clip because of
// overflow:scroll.
EXPECT_EQ(LayoutRect(2, 3, 140, 110), rect);
rect = targetVisualRect;
EXPECT_TRUE(target->mapToVisualRectInAncestorSpace(&layoutView(), rect));
// (2, 3, 140, 100) is first clipped by container's overflow clip, to
// (10, 10, 50, 80), then is by added container's offset in LayoutView
// (111, 222).
EXPECT_EQ(LayoutRect(232, 121, 50, 80), rect);
checkPaintInvalidationStateRectMapping(rect, targetVisualRect, *target,
layoutView(), layoutView());
LayoutRect containerVisualRect = container->localVisualRect();
// Because container has overflow clip, its visual overflow doesn't include
// overflow from children.
// 70 = width(50) + border_left_width(10) + border_right_width(10)
// 100 = height(80) + border_top_width(10) + border_bottom_width(10)
EXPECT_EQ(LayoutRect(0, 0, 70, 100), containerVisualRect);
rect = containerVisualRect;
EXPECT_TRUE(container->mapToVisualRectInAncestorSpace(container, rect));
// Container should not apply overflow clip on its own overflow rect.
EXPECT_EQ(LayoutRect(0, 0, 70, 100), rect);
rect = containerVisualRect;
EXPECT_TRUE(container->mapToVisualRectInAncestorSpace(&layoutView(), rect));
EXPECT_EQ(LayoutRect(222, 111, 70, 100), rect);
checkPaintInvalidationStateRectMapping(rect, containerVisualRect, *container,
layoutView(), layoutView());
}
IntPoint AccessibilityObject::clickPoint()
{
LayoutRect rect = elementRect();
return roundedIntPoint(LayoutPoint(rect.x() + rect.width() / 2, rect.y() + rect.height() / 2));
}
LayoutRect LayoutTextControlSingleLine::controlClipRect(
const LayoutPoint& additionalOffset) const {
LayoutRect clipRect = paddingBoxRect();
clipRect.moveBy(additionalOffset);
return clipRect;
}
void RenderReplaced::paint(PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
if (!shouldPaint(paintInfo, paintOffset))
return;
#ifndef NDEBUG
SetLayoutNeededForbiddenScope scope(this);
#endif
LayoutPoint adjustedPaintOffset = paintOffset + location();
if (hasVisibleBoxDecorations() && paintInfo.phase == PaintPhaseForeground)
paintBoxDecorations(paintInfo, adjustedPaintOffset);
if (paintInfo.phase == PaintPhaseMask) {
paintMask(paintInfo, adjustedPaintOffset);
return;
}
LayoutRect paintRect = LayoutRect(adjustedPaintOffset, size());
if ((paintInfo.phase == PaintPhaseOutline || paintInfo.phase == PaintPhaseSelfOutline) && style().outlineWidth())
paintOutline(paintInfo, paintRect);
if (paintInfo.phase != PaintPhaseForeground && paintInfo.phase != PaintPhaseSelection && !canHaveChildren())
return;
if (!paintInfo.shouldPaintWithinRoot(*this))
return;
bool drawSelectionTint = shouldDrawSelectionTint();
if (paintInfo.phase == PaintPhaseSelection) {
if (selectionState() == SelectionNone)
return;
drawSelectionTint = false;
}
bool completelyClippedOut = false;
if (style().hasBorderRadius()) {
LayoutRect borderRect = LayoutRect(adjustedPaintOffset, size());
if (borderRect.isEmpty())
completelyClippedOut = true;
else {
// Push a clip if we have a border radius, since we want to round the foreground content that gets painted.
paintInfo.context().save();
FloatRoundedRect roundedInnerRect = FloatRoundedRect(style().getRoundedInnerBorderFor(paintRect,
paddingTop() + borderTop(), paddingBottom() + borderBottom(), paddingLeft() + borderLeft(), paddingRight() + borderRight(), true, true));
clipRoundedInnerRect(paintInfo.context(), paintRect, roundedInnerRect);
}
}
if (!completelyClippedOut) {
paintReplaced(paintInfo, adjustedPaintOffset);
if (style().hasBorderRadius())
paintInfo.context().restore();
}
// The selection tint never gets clipped by border-radius rounding, since we want it to run right up to the edges of
// surrounding content.
if (drawSelectionTint) {
LayoutRect selectionPaintingRect = localSelectionRect();
selectionPaintingRect.moveBy(adjustedPaintOffset);
paintInfo.context().fillRect(snappedIntRect(selectionPaintingRect), selectionBackgroundColor());
}
}
LayoutUnit RenderRegion::logicalBottomOfFlowThreadContentRect(const LayoutRect& rect) const
{
ASSERT(isValid());
return flowThread()->isHorizontalWritingMode() ? rect.maxY() : rect.maxX();
}
void ImagePainter::paintReplaced(PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
LayoutUnit cWidth = m_renderImage.contentWidth();
LayoutUnit cHeight = m_renderImage.contentHeight();
GraphicsContext* context = paintInfo.context;
if (!m_renderImage.imageResource()->hasImage() || m_renderImage.imageResource()->errorOccurred()) {
if (paintInfo.phase == PaintPhaseSelection)
return;
if (cWidth > 2 && cHeight > 2) {
const int borderWidth = 1;
LayoutUnit leftBorder = m_renderImage.borderLeft();
LayoutUnit topBorder = m_renderImage.borderTop();
LayoutUnit leftPad = m_renderImage.paddingLeft();
LayoutUnit topPad = m_renderImage.paddingTop();
// Draw an outline rect where the image should be.
IntRect paintRect = pixelSnappedIntRect(LayoutRect(paintOffset.x() + leftBorder + leftPad, paintOffset.y() + topBorder + topPad, cWidth, cHeight));
DrawingRecorder recorder(context, &m_renderImage, paintInfo.phase, paintRect);
context->setStrokeStyle(SolidStroke);
context->setStrokeColor(Color::lightGray);
context->setFillColor(Color::transparent);
context->drawRect(paintRect);
bool errorPictureDrawn = false;
LayoutSize imageOffset;
// When calculating the usable dimensions, exclude the pixels of
// the ouline rect so the error image/alt text doesn't draw on it.
LayoutUnit usableWidth = cWidth - 2 * borderWidth;
LayoutUnit usableHeight = cHeight - 2 * borderWidth;
RefPtr<Image> image = m_renderImage.imageResource()->image();
if (m_renderImage.imageResource()->errorOccurred() && !image->isNull() && usableWidth >= image->width() && usableHeight >= image->height()) {
float deviceScaleFactor = blink::deviceScaleFactor(m_renderImage.frame());
// Call brokenImage() explicitly to ensure we get the broken image icon at the appropriate resolution.
pair<Image*, float> brokenImageAndImageScaleFactor = ImageResource::brokenImage(deviceScaleFactor);
image = brokenImageAndImageScaleFactor.first;
IntSize imageSize = image->size();
imageSize.scale(1 / brokenImageAndImageScaleFactor.second);
// Center the error image, accounting for border and padding.
LayoutUnit centerX = (usableWidth - imageSize.width()) / 2;
if (centerX < 0)
centerX = 0;
LayoutUnit centerY = (usableHeight - imageSize.height()) / 2;
if (centerY < 0)
centerY = 0;
imageOffset = LayoutSize(leftBorder + leftPad + centerX + borderWidth, topBorder + topPad + centerY + borderWidth);
context->drawImage(image.get(), pixelSnappedIntRect(LayoutRect(paintOffset + imageOffset, imageSize)), CompositeSourceOver, m_renderImage.shouldRespectImageOrientation());
errorPictureDrawn = true;
}
if (!m_renderImage.altText().isEmpty()) {
const Font& font = m_renderImage.style()->font();
const FontMetrics& fontMetrics = font.fontMetrics();
LayoutUnit ascent = fontMetrics.ascent();
LayoutPoint textRectOrigin = paintOffset;
textRectOrigin.move(leftBorder + leftPad + (RenderImage::paddingWidth / 2) - borderWidth, topBorder + topPad + (RenderImage::paddingHeight / 2) - borderWidth);
LayoutPoint textOrigin(textRectOrigin.x(), textRectOrigin.y() + ascent);
// Only draw the alt text if it'll fit within the content box,
// and only if it fits above the error image.
TextRun textRun = constructTextRun(&m_renderImage, font, m_renderImage.altText(), m_renderImage.style(), TextRun::AllowTrailingExpansion | TextRun::ForbidLeadingExpansion, DefaultTextRunFlags | RespectDirection);
float textWidth = font.width(textRun);
TextRunPaintInfo textRunPaintInfo(textRun);
textRunPaintInfo.bounds = FloatRect(textRectOrigin, FloatSize(textWidth, fontMetrics.height()));
context->setFillColor(m_renderImage.resolveColor(CSSPropertyColor));
if (textRun.direction() == RTL) {
int availableWidth = cWidth - static_cast<int>(RenderImage::paddingWidth);
textOrigin.move(availableWidth - ceilf(textWidth), 0);
}
if (errorPictureDrawn) {
if (usableWidth >= textWidth && fontMetrics.height() <= imageOffset.height())
context->drawBidiText(font, textRunPaintInfo, textOrigin);
} else if (usableWidth >= textWidth && usableHeight >= fontMetrics.height()) {
context->drawBidiText(font, textRunPaintInfo, textOrigin);
}
}
}
} else if (m_renderImage.imageResource()->hasImage() && cWidth > 0 && cHeight > 0) {
LayoutRect contentRect = m_renderImage.contentBoxRect();
contentRect.moveBy(paintOffset);
LayoutRect paintRect = m_renderImage.replacedContentRect();
paintRect.moveBy(paintOffset);
DrawingRecorder recorder(context, &m_renderImage, paintInfo.phase, contentRect);
bool clip = !contentRect.contains(paintRect);
if (clip) {
context->save();
context->clip(contentRect);
}
paintIntoRect(context, paintRect);
if (clip)
context->restore();
}
}
LayoutRect RenderRegion::overflowRectForFlowThreadPortion(LayoutRect flowThreadPortionRect, bool isFirstPortion, bool isLastPortion) const
{
ASSERT(isValid());
// FIXME: Would like to just use hasOverflowClip() but we aren't a block yet. When RenderRegion is eliminated and
// folded into RenderBlock, switch to hasOverflowClip().
bool clipX = style()->overflowX() != OVISIBLE;
bool clipY = style()->overflowY() != OVISIBLE;
bool isLastRegionWithRegionOverflowBreak = (isLastPortion && (style()->regionOverflow() == BreakRegionOverflow));
if ((clipX && clipY) || isLastRegionWithRegionOverflowBreak)
return flowThreadPortionRect;
LayoutRect flowThreadOverflow = m_flowThread->visualOverflowRect();
// Only clip along the flow thread axis.
LayoutUnit outlineSize = maximalOutlineSize(PaintPhaseOutline);
LayoutRect clipRect;
if (m_flowThread->isHorizontalWritingMode()) {
LayoutUnit minY = isFirstPortion ? (flowThreadOverflow.y() - outlineSize) : flowThreadPortionRect.y();
LayoutUnit maxY = isLastPortion ? max(flowThreadPortionRect.maxY(), flowThreadOverflow.maxY()) + outlineSize : flowThreadPortionRect.maxY();
LayoutUnit minX = clipX ? flowThreadPortionRect.x() : min(flowThreadPortionRect.x(), flowThreadOverflow.x() - outlineSize);
LayoutUnit maxX = clipX ? flowThreadPortionRect.maxX() : max(flowThreadPortionRect.maxX(), (flowThreadOverflow.maxX() + outlineSize));
clipRect = LayoutRect(minX, minY, maxX - minX, maxY - minY);
} else {
LayoutUnit minX = isFirstPortion ? (flowThreadOverflow.x() - outlineSize) : flowThreadPortionRect.x();
LayoutUnit maxX = isLastPortion ? max(flowThreadPortionRect.maxX(), flowThreadOverflow.maxX()) + outlineSize : flowThreadPortionRect.maxX();
LayoutUnit minY = clipY ? flowThreadPortionRect.y() : min(flowThreadPortionRect.y(), (flowThreadOverflow.y() - outlineSize));
LayoutUnit maxY = clipY ? flowThreadPortionRect.maxY() : max(flowThreadPortionRect.y(), (flowThreadOverflow.maxY() + outlineSize));
clipRect = LayoutRect(minX, minY, maxX - minX, maxY - minY);
}
return clipRect;
}
void LayoutMedia::layout() {
LayoutSize oldSize = contentBoxRect().size();
LayoutImage::layout();
LayoutRect newRect = contentBoxRect();
LayoutState state(*this);
Optional<LayoutUnit> newPanelWidth;
// Iterate the children in reverse order so that the media controls are laid
// out before the text track container. This is to ensure that the text
// track rendering has an up-to-date position of the media controls for
// overlap checking, see LayoutVTTCue.
#if ENABLE(ASSERT)
bool seenTextTrackContainer = false;
#endif
for (LayoutObject* child = m_children.lastChild(); child;
child = child->previousSibling()) {
#if ENABLE(ASSERT)
if (child->node()->isMediaControls())
ASSERT(!seenTextTrackContainer);
else if (child->node()->isTextTrackContainer())
seenTextTrackContainer = true;
else
ASSERT_NOT_REACHED();
#endif
// TODO(mlamouri): we miss some layouts because needsLayout returns false in
// some cases where we want to change the width of the controls because the
// visible viewport has changed for example.
if (newRect.size() == oldSize && !child->needsLayout())
continue;
LayoutUnit width = newRect.width();
if (child->node()->isMediaControls()) {
width = computePanelWidth(newRect);
if (width != oldSize.width())
newPanelWidth = width;
}
LayoutBox* layoutBox = toLayoutBox(child);
layoutBox->setLocation(newRect.location());
// TODO(foolip): Remove the mutableStyleRef() and depend on CSS
// width/height: inherit to match the media element size.
layoutBox->mutableStyleRef().setHeight(Length(newRect.height(), Fixed));
layoutBox->mutableStyleRef().setWidth(Length(width, Fixed));
layoutBox->forceLayout();
}
clearNeedsLayout();
// Notify our MediaControls that a layout has happened.
if (mediaElement() && mediaElement()->mediaControls() &&
newPanelWidth.has_value()) {
mediaElement()->mediaControls()->notifyPanelWidthChanged(
newPanelWidth.value());
}
}
bool LayoutRect::contains(const LayoutRect& other) const
{
return x() <= other.x() && maxX() >= other.maxX()
&& y() <= other.y() && maxY() >= other.maxY();
}
