int main()
{
PNG oldImage;
oldImage.readFromFile("in.png");
size_t vertical = oldImage.height();
size_t horizontal = oldImage.width();
/*
* have initialized newImage just so that the pixels are accessable
*/
PNG newImage;
newImage.readFromFile("in.png");
/*
* we will flip the image horizontally and vertically to rotate it by 180 degrees
*/
for (size_t x = 0; x < oldImage.width(); x++)
{
for (size_t y = 0; y < oldImage.height(); y++)
{
newImage(horizontal-x-1, vertical-y-1)->red = oldImage(x,y)->red;
newImage(horizontal-x-1, vertical-y-1)->green = oldImage(x,y)->green;
newImage(horizontal-x-1, vertical-y-1)->blue = oldImage(x,y)->blue;
}
}
newImage.writeToFile("out.png");
}
void pacmanTests() {
cout << "Testing PacMan" << endl;
// PAC MAN BFS
PNG img;
img.readFromFile("originals/pacMan.png");
rainbowColorPicker BFSfiller(1.0/1000.0);
animation pacManBFS = filler::bfs::fill(img, img.width()/2, img.height()/2,
BFSfiller, 8000, INT_MAX);
img.writeToFile("images/pacManBFS.png");
cout << "\tWrote images/pacManBFS.png" << endl;
//blueManBFS.write("pacManBFS.gif");
// PAC MAN DFS
img.readFromFile("originals/pacMan.png");
rainbowColorPicker DFSfiller(1.0/1000.0);
animation pacManDFS = filler::dfs::fill(img, img.width()/2, img.height()/2,
DFSfiller, 8000, INT_MAX);
img.writeToFile("images/pacManDFS.png");
cout << "\tWrote images/pacManDFS.png" << endl;
// Make ANTI image
PNG antiImg;
antiImg.readFromFile("originals/pacMan.png");
RGBAPixel black;
black.red = black.green = black.blue = 0;
RGBAPixel grey;
grey.red = grey.green = grey.blue = 1;
filler::bfs::fillSolid(antiImg, 10, 10, grey, 8000, INT_MAX);
filler::bfs::fillSolid(antiImg, antiImg.width()/2, antiImg.height()/2, black, 8000, INT_MAX);
// ANTI PAC MAN BFS
img = antiImg;
rainbowColorPicker aBFSfiller(1.0/1000.0);
animation aManBFS = filler::bfs::fill(img, 20, 20, aBFSfiller, 0, 2000);
//img.writeToFile("antiPacManBFS.png");
aManBFS.write("images/antiPacManBFS.gif");
cout << "\tWrote images/antiPacManBFS.gif" << endl;
// ANTI PAC MAN DFS
img = antiImg;
rainbowColorPicker aDFSfiller(1.0/1000.0);
animation aManDFS = filler::dfs::fill(img, 20, 20, aDFSfiller, 0, 2000);
//img.writeToFile("antiPacManDFS.png");
aManDFS.write("images/antiPacManDFS.gif");
cout << "\tWrote images/antiPacManDFS.gif" << endl;
}
/**
* This function brightens a rectangle of a PNG, increasing the components
* (red, green, blue) of each pixel by the given amount. You must account
* for potential overflow issues (color components can only store numbers
* between 0 and 255). If you attempt to store a value greater than 255
* into a color component, the result will wrap around (and you won't be
* able to check if it was greater than 255).
*
* @param original A PNG object which holds the image data to be modified.
* @param amount The integer amount by which to increase each pixel's
* components.
*
* @return The brightened image.
*/
PNG brighten(PNG original, int amount)
{
/// You can assume amount is positive.
for (size_t yi = 0; yi < original.height(); yi++)
{
for (size_t xi = 0; xi < original.width(); xi++)
{
/// Your code here!
int blue = original(xi, yi)->blue;
int green = original(xi, yi)->green;
int red = original(xi, yi)->red;
if(red+amount<255)
original(xi,yi)->red= red+amount;
else
original(xi,yi)->red= 255;
if(blue+amount<255)
original(xi,yi)->blue= blue+amount;
else
original(xi,yi)->blue= 255;
if(green+amount<255)
original(xi,yi)->green= green+amount;
else
original(xi,yi)->green= 255;
}
}
return original;
}
/**
* Removes an RGB color component from the PNG.
* THIS FUNCTION IS GRADED.
* @todo - parallelize removeColor()
* @param source - the original PNG
* @param color - the color to remove
* @return - a PNG object with an RGB component taken out
* of each pixel (if color parameter is valid)
*/
PNG ImageTools::removeColor(const PNG & source, const Color & color)
{
int width = source.width();
int height = source.height();
PNG output(width, height);
#pragma omp parallel for
for(int i = 0; i < width; ++i)
{
for(int j = 0; j < height; ++j)
{
*output(i, j) = *source(i, j);
switch(color)
{
case RED:
output(i,j)->red=0;
break;
case GREEN:
output(i,j)->green=0;
break;
case BLUE:
output(i,j)->blue=0;
break;
}
}
}
return output;
}
/**
* Makes an animation of an image shifting to the left
* @param toShift - the image to be shifted
* @return - an animation of the image being shifted
*/
animation Shifter::shiftParallel(const PNG & toShift)
{
PNG image = toShift;
animation anim;
int width = image.width();
int height = image.height();
int shiftAmount = 32;
// shift image to the left by 32 pixels each iteration
for(int destCol = 0; destCol < width; destCol += 32)
{
for(int x = 0; x < width - 32; ++x)
{
#pragma omp parallel for
for(int y = 0; y < height; ++y)
{
*image(x, y) = *image(x + 32, y);
}
}
if(destCol % shiftAmount == 0)
{
anim.addFrame(image);
}
}
return anim;
}
/**
* This function brightens a rectangle of a PNG, increasing the components
* (red, green, blue) of each pixel by the given amount. You must account
* for potential overflow issues (color components can only store numbers
* between 0 and 255). If you attempt to store a value greater than 255
* into a color component, the result will wrap around (and you won't be
* able to check if it was greater than 255).
*
* @param original A PNG object which holds the image data to be modified.
* @param amount The integer amount by which to increase each pixel's
* components.
*
* @return The brightened image.
*/
PNG brighten(PNG original, int amount)
{
/// You can assume amount is positive.
for (size_t yi = 0; yi < original.height(); yi++)
{
for (size_t xi = 0; xi < original.width(); xi++)
{
size_t r = original(xi, yi) -> red;
size_t g = original(xi, yi) -> green;
size_t b = original(xi, yi) -> blue;
r = r + amount;
g = g + amount;
b = b + amount;
if(r > 255){
r = 255;
}
if(g > 255){
g = 255;
}
if(b > 255){
b = 255;
}
original(xi, yi) ->red = r;
original(xi, yi) ->green = g;
original(xi, yi) ->blue = b;
/// Your code here!
}
}
return original;
}
int main()
{
// Load in.png
PNG * original;
original=new PNG;
original->readFromFile("in.png");
int width = original->width();
int height = original->height();
// Create out.png
PNG * output;
output = new PNG;
output = setupOutput(width, height);
// Loud our favorite color to color the outline
RGBAPixel * myPixel;
myPixel=new RGBAPixel;
myPixel= myFavoriteColor(192);
// Go over the whole image, and if a pixel differs from that to its upper
// left, color it my favorite color in the output
for (int y = 1; y < height; y++)
{
for (int x = 1; x < width; x++)
{
// Calculate the pixel difference
RGBAPixel * prev = (*original)(x-1, y-1);
RGBAPixel * curr = (*original)(x , y );
int diff = abs(curr->red - prev->red ) +
abs(curr->green - prev->green) +
abs(curr->blue - prev->blue );
// If the pixel is an edge pixel,
// color the output pixel with my favorite color
RGBAPixel * currOutPixel = (*output)(x,y);
if (diff > 100)
{currOutPixel->red=myPixel->red;
currOutPixel->green=myPixel->green;
currOutPixel->blue=myPixel->blue;}
}
}
// Save the output file
output->writeToFile("out.png");
// Clean up memory
myPixel=NULL;
delete myPixel;
delete output;
output=NULL;
delete original;
original=NULL;
return 0;
}
void sketchify()
{
// Load in.png
PNG * original;
//std::cout << "Reached line 28" << endl;
original = new PNG();
original->readFromFile("in.png");
int width = original->width();
int height = original->height();
//std::cout << "Reached line 32" << endl;
// Create out.png
PNG * output = setupOutput(width, height);
// Loud our favorite color to color the outline
RGBAPixel * myPixel = myFavoriteColor(192);
// Go over the whole image, and if a pixel differs from that to its upper
// left, color it my favorite color in the output
for (int y = 1; y < height; y++)
{
//std::cout << "begin" << endl;
for (int x = 1; x < width; x++)
{
// Calculate the pixel difference
RGBAPixel * prev = (*original)(x-1, y-1);
RGBAPixel * curr = (*original)(x , y );
int diff = abs(curr->red - prev->red ) +
abs(curr->green - prev->green) +
abs(curr->blue - prev->blue );
// If the pixel is an edge pixel,
// color the output pixel with my favorite color
RGBAPixel * currOutPixel =(*output)(x,y);
if (diff > 100)
*currOutPixel = *myPixel;
//*(*output)(x,y) = *myPixel;
}
//std::cout << "end" << endl;
}
// Save the output file
//std::cout << "begin" << endl;
output->writeToFile("out.png");
//std::cout << "end" << endl;
// Clean up memory
delete myPixel;
//std::cout << "check1" << endl;
delete output;
delete original;
//std::cout << "check2" << endl;
}
/**
* This function accepts a PNG object, two integer coordinates and a color, and
* proceeds to draw a horizontal line across the image at the y coordinate and
* a vertical line down the image at the x coordinage using the given color.
* The modified PNG is then returned.
*
* @param original A PNG object which holds the image data to be modified.
* @param centerX The center x coordinate of the crosshair which is to be drawn.
* @param centerY The center y coordinate of the crosshair which is to be drawn.
* @param color The color of the lines to be drawn.
*
* @return The image on which a crosshair has been drawn.
*/
PNG drawCrosshairs(PNG original, int centerX, int centerY, RGBAPixel color)
{
/// This function is already written for you so you can see how to
/// interact with our PNG class.
for (size_t x = 0; x < original.width(); x++)
*original(x, centerY) = color;
for (size_t y = 0; y < original.height(); y++)
*original(centerX, y) = color;
return original;
}
List<RGBAPixel> imageToList(PNG const & img)
{
List<RGBAPixel> list;
for (int i = 0; i < img.width(); i++)
{
for (int j = 0; j < img.height(); j++)
{
list.insertFront(*img(i,j));
}
}
return list;
}
/**
* This function blends, or averages, two PNGs together. That is, each pixel in
* the returned image consists of the averaged components (red, green, blue) of
* the two input images.
*
* @param firstImage The first of the two PNGs to be averaged together.
* @param secondImage The second of the two PNGs to be averaged together.
*
* @return The averaged image.
*/
PNG blendImages(PNG firstImage, PNG secondImage)
{
for (size_t yi = 0; yi < firstImage.height(); yi++)
{
for (size_t xi = 0; xi < firstImage.width(); xi++)
{
firstImage(xi, yi)->green =(firstImage(xi, yi)->green+secondImage(xi, yi)->green)/2;
firstImage(xi, yi)->red =(firstImage(xi, yi)->red+secondImage(xi, yi)->red)/2;
firstImage(xi, yi)->blue =(firstImage(xi, yi)->blue+secondImage(xi, yi)->blue)/2;
}
}
return firstImage;
}
void testWaterfall()
{
cout << "[main]: " << __func__ << "()" << endl;
PNG in;
in.readFromFile("in_05.png");
List<RGBAPixel> list = imageToList(in);
list.waterfall();
PNG out = listToImage(list, in.width(), in.height());
out.writeToFile("waterfall_01.png");
checkSoln(__func__, out, "soln_waterfall_01.png");
in.readFromFile("in_06.png");
list = imageToList(in);
list.waterfall();
out = listToImage(list, in.width(), in.height());
out.writeToFile("waterfall_02.png");
checkSoln(__func__, out, "soln_waterfall_02.png");
}
/**
* This function brightens a rectangle of a PNG, increasing the components
* (red, green, blue) of each pixel by the given amount. You must account
* for potential overflow issues (color components can only store numbers
* between 0 and 255). If you attempt to store a value greater than 255
* into a color component, the result will wrap around (and you won't be
* able to check if it was greater than 255).
*
* @param original A PNG object which holds the image data to be modified.
* @param amount The integer amount by which to increase each pixel's
* components.
*
* @return The brightened image.
*/
PNG brighten(PNG original, int amount)
{
/// You can assume amount is positive.
for (size_t yi = 0; yi < original.height(); yi++)
{
for (size_t xi = 0; xi < original.width(); xi++)
{
/// Your code here!
//original(xi,yi)->red = 0;
//original(xi,yi)->blue = 0;
}
}
return original;
}
void testReverse()
{
cout << "[main]: " << __func__ << "()" << endl;
PNG in;
in.readFromFile("in_02.png");
List<RGBAPixel> list = imageToList(in);
list.reverse();
PNG out = listToImage(list, in.width(), in.height());
out.writeToFile("reverse.png");
checkSoln(__func__, out, "soln_reverse.png");
}
PNG rotate(PNG original, PNG result)
{ //this function rotate the original file 180 degree and return the result
size_t height = original.height();
size_t width = original.width();
for (size_t yi = 0; yi < height; yi++)
{
for (size_t xi = 0; xi < width; xi++)
{ result(width-xi-1,height-yi-1)->red = original(xi,yi)->red;
result(width-xi-1,height-yi-1)->green = original(xi,yi)->green;
result(width-xi-1,height-yi-1)->blue = original(xi,yi)->blue;
result(width-xi-1,height-yi-1)->alpha = original(xi,yi)->alpha;
}
}
return result;
}
List<RGBAPixel> imageToList(PNG const & img, bool reverse = false)
{
List<RGBAPixel> list;
for (int i = 0; i < img.width(); i++)
{
for (int j = 0; j < img.height(); j++)
{
if (reverse)
list.insertFront(*img(i,j));
else
list.insertBack(*img(i,j));
}
}
return list;
}
/**
* Flips an image around a horizontal axis in-place.
* @param image - the image to flip
*/
void Flipper::flipSerial(PNG & image)
{
RGBAPixel temp;
int height = image.height();
int width = image.width();
for(int i = 0; i < width; ++i)
{
for(int j = 0; j < height / 2; ++j)
{
temp = *image(i, j);
*image(i, j) = *image(i, height - 1 - j);
*image(i, height - 1 - j) = temp;
}
}
}
/**
* Flips an image around a horizontal axis in-place.
* @param image - the image to flip
*/
void Flipper::flipParallel(PNG & image)
{
// TODO: parallelize the code below
//RGBAPixel temp;
int height = image.height();
int width = image.width();
#pragma omp parallel for
for(int i = 0; i < width; ++i)
{
for(int j = 0; j < height / 2; ++j)
{
RGBAPixel temp = *image(i, j);
*image(i, j) = *image(i, height - 1 - j);
*image(i, height - 1 - j) = temp;
}
}
}
/**
* Flips the source image into a new PNG.
* THIS FUNCTION IS GRADED.
* @todo - parallelize verticalFlip()
* @param source - the original PNG
* @return - a copy of the parameter that has been flipped
* over the vertical axis
*/
PNG ImageTools::verticalFlip(const PNG & source)
{
int width = source.width();
int height = source.height();
PNG output(width, height);
#pragma omp parallel for
for(int i = 0; i < width; ++i)
{
for(int j = 0; j < height; ++j)
{
// flip!
output(i,j)->red=source(width-i-1,j)->red;
output(i,j)->green=source(width-i-1,j)->green;
output(i,j)->blue=source(width-i-1,j)->blue;
}
}
return output;
}
/**
* This function brightens a rectangle of a PNG, increasing the components
* (red, green, blue) of each pixel by the given amount. You must account
* for potential overflow issues (color components can only store numbers
* between 0 and 255). If you attempt to store a value greater than 255
* into a color component, the result will wrap around (and you won't be
* able to check if it was greater than 255).
*
* @param original A PNG object which holds the image data to be modified.
* @param amount The integer amount by which to increase each pixel's
* components.
*
* @return The brightened image.
*/
PNG brighten(PNG original, int amount)
{
/// You can assume amount is positive.
for (size_t yi = 0; yi < original.height(); yi++)
{
for (size_t xi = 0; xi < original.width(); xi++)
{
if(original(xi, yi)->red+amount<=255){
original(xi, yi)->red = original(xi, yi)->red+amount;}
else original(xi, yi)->red = 255;
if(original(xi, yi)->green+amount<=255){
original(xi, yi)->green = original(xi, yi)->green+amount;}
else original(xi, yi)->green = 255;
if(original(xi, yi)->blue+amount<=255){
original(xi, yi)->blue = original(xi, yi)->blue+amount;}
else original(xi, yi)->blue = 255;
}
}
return original;
}
/**
* This function blends, or averages, two PNGs together. That is, each pixel in
* the returned image consists of the averaged components (red, green, blue) of
* the two input images.
*
* @param firstImage The first of the two PNGs to be averaged together.
* @param secondImage The second of the two PNGs to be averaged together.
*
* @return The averaged image.
*/
PNG blendImages(PNG firstImage, PNG secondImage)
{
for(size_t x = 0; x < firstImage.width(); x++){
for(size_t y = 0; y < firstImage.height(); y++){
size_t r1 = firstImage(x, y) ->red;
size_t r2 = secondImage(x, y) ->red;
size_t g1 = firstImage(x, y) ->green;
size_t g2 = secondImage(x, y) ->green;
size_t b1 = firstImage(x, y) ->blue;
size_t b2 = secondImage(x, y) ->blue;
size_t r = (r1 + r2)/2;
size_t g = (g1 + g2)/2;
size_t b = (b1 + b2)/2;
firstImage(x,y) ->red = r;
firstImage(x,y) ->green = g;
firstImage(x,y) ->blue = b;
}
}
/// Your code here!
return firstImage;
}
/**
* This function blends, or averages, two PNGs together. That is, each pixel in
* the returned image consists of the averaged components (red, green, blue) of
* the two input images.
*
* @param firstImage The first of the two PNGs to be averaged together.
* @param secondImage The second of the two PNGs to be averaged together.
*
* @return The averaged image.
*/
PNG blendImages(PNG firstImage, PNG secondImage)
{
/// Your code here!
for (size_t yi = 0; yi < firstImage.height(); yi++)
{
for (size_t xi = 0; xi < firstImage.width(); xi++)
{
int c1 = firstImage(xi, yi)->red;
int c2 = secondImage(xi, yi)->red;
int c3=(c1+c2)/2;
firstImage(xi,yi)->red= c3;
c1 = firstImage(xi, yi)->blue;
c2 = secondImage(xi, yi)->blue;
c3=(c1+c2)/2;
firstImage(xi,yi)->blue= c3;
c1 = firstImage(xi, yi)->green;
c2 = secondImage(xi, yi)->green;
c3=(c1+c2)/2;
firstImage(xi,yi)->green= c3;
}
}
return firstImage;
}
animation filler::fill( PNG & img, int x, int y,
colorPicker & fillColor, int tolerance, int frameFreq ) {
/**
* @todo You need to implement this function!
*
* This is the basic description of a flood-fill algorithm: Every fill
* algorithm requires an ordering structure, which is passed to this
* function via its template parameter. For a breadth-first-search
* fill, that structure is a Queue, for a depth-first-search, that
* structure is a Stack. To begin the algorithm, you simply place the
* given point in the ordering structure. Then, until the structure is
* empty, you do the following:
*
* 1. Remove a point from the ordering structure.
*
* If it has not been processed before and if its color is
* within the tolerance distance (up to and **including**
* tolerance away in square-RGB-space-distance) to the original
* point's pixel color [that is, \f$(currentRed - OriginalRed)^2 +
(currentGreen - OriginalGreen)^2 + (currentBlue -
OriginalBlue)^2 \leq tolerance\f$], then:
* 1. indicate somehow that it has been processed (do not mark it
* "processed" anywhere else in your code)
* 2. change its color in the image using the appropriate
* colorPicker
* 3. add all of its neighbors to the ordering structure, and
* 4. if it is the appropriate frame, send the current PNG to the
* animation (as described below).
* 2. When implementing your breadth-first-search and
* depth-first-search fills, you will need to explore neighboring
* pixels in some order.
*
* While the order in which you examine neighbors does not matter
* for a proper fill, you must use the same order as we do for
* your animations to come out like ours! The order you should put
* neighboring pixels **ONTO** the queue or stack is as follows:
* **RIGHT(+x), DOWN(+y), LEFT(-x), UP(-y). IMPORTANT NOTE: *UP*
* here means towards the top of the image, so since an image has
* smaller y coordinates at the top, this is in the *negative y*
* direction. Similarly, *DOWN* means in the *positive y*
* direction.** To reiterate, when you are exploring (filling out)
* from a given pixel, you must first try to fill the pixel to
* it's RIGHT, then the one DOWN from it, then to the LEFT and
* finally UP. If you do them in a different order, your fill may
* still work correctly, but your animations will be different
* from the grading scripts!
* 3. For every k pixels filled, **starting at the kth pixel**, you
* must add a frame to the animation, where k = frameFreq.
*
* For example, if frameFreq is 4, then after the 4th pixel has
* been filled you should add a frame to the animation, then again
* after the 8th pixel, etc. You must only add frames for the
* number of pixels that have been filled, not the number that
* have been checked. So if frameFreq is set to 1, a pixel should
* be filled every frame.
*/
animation mainframe;
int row = img.height();
int col = img.width();
int xcord = x;
int ycord = y;
int counter = 0;
//Every fill algorithm requires an ordering structure
OrderingStructure <int> tempx;
OrderingStructure <int> tempy;
//making arrays for checking if pixel is processed already
bool ** processed = new bool* [col];
for(int i = 0; i < col; i++){
processed[i] = new bool[row];
for(int j = 0; j < row; j++){
processed[i][j] = false;
}
}
// you simply place the given point in the ordering structure
tempx.add(xcord);
tempy.add(ycord);
RGBAPixel origin = *img(x,y);
//Then, until the structure is empty, you do the following
while(tempx.isEmpty() == false && tempy.isEmpty() == false){
//Remove a point from the ordering structure.
xcord = tempx.peek();
ycord = tempy.peek();
tempx.remove();
tempy.remove();
int redval = img(xcord,ycord)->red-origin.red;
int greenval = img(xcord,ycord)->green-origin.green;
int blueval = img(xcord,ycord)->blue-origin.blue;
//If it has not been processed before and if its color is within the tolerance distance
if(!processed[xcord][ycord] ){
//indicate somehow that it has been processedprocessed[xcord][ycord] = true
processed[xcord][ycord] = true;
if (redval*redval + greenval*greenval + blueval*blueval <= tolerance){
//change its color in the image using the appropriate colorPicker
*img(xcord,ycord) = fillColor(xcord,ycord);
//add all of its neighbors to the ordering structure
if(xcord+1 < row && ycord < col ) {
tempx.add(xcord+1);
tempy.add(ycord);
}
if(xcord < row && ycord + 1 < col ) {
tempx.add(xcord);
tempy.add(ycord+1);
}
if(xcord-1 >= 0 && xcord-1 < row && ycord < col ) {
tempx.add(xcord-1);
tempy.add(ycord);
}
if(xcord < row && ycord-1 < col && ycord -1 >= 0 ) {
tempx.add(xcord);
tempy.add(ycord-1);
}
//if it is the appropriate frame, send the current PNG to the animation
counter++;
if(counter % frameFreq == 0){
counter = 0;
mainframe.addFrame(img);
}
}
}
}
for(int i = 0; i < col; i++){
delete [] processed[i];
}
delete [] processed;
return mainframe;
}
animation filler::fill( PNG & img, int x, int y,
colorPicker & fillColor, int tolerance, int frameFreq ) {
/**
* @todo You need to implement this function!
*
* This is the basic description of a flood-fill algorithm: Every fill
* algorithm requires an ordering structure, which is passed to this
* function via its template parameter. For a breadth-first-search
* fill, that structure is a Queue, for a depth-first-search, that
* structure is a Stack. To begin the algorithm, you simply place the
* given point in the ordering structure. Then, until the structure is
* empty, you do the following:
*
* 1. Remove a point from the ordering structure.
*
* If it has not been processed before and if its color is
* within the tolerance distance (up to and **including**
* tolerance away in square-RGB-space-distance) to the original
* point's pixel color [that is, \f$(currentRed - OriginalRed)^2 +
(currentGreen - OriginalGreen)^2 + (currentBlue -
OriginalBlue)^2 \leq tolerance\f$], then:
* 1. indicate somehow that it has been processed (do not mark it
* "processed" anywhere else in your code)
* 2. change its color in the image using the appropriate
* colorPicker
* 3. add all of its neighbors to the ordering structure, and
* 4. if it is the appropriate frame, send the current PNG to the
* animation (as described below).
* 2. When implementing your breadth-first-search and
* depth-first-search fills, you will need to explore neighboring
* pixels in some order.
*
* While the order in which you examine neighbors does not matter
* for a proper fill, you must use the same order as we do for
* your animations to come out like ours! The order you should put
* neighboring pixels **ONTO** the queue or stack is as follows:
* **RIGHT(+x), DOWN(+y), LEFT(-x), UP(-y). IMPORTANT NOTE: *UP*
* here means towards the top of the image, so since an image has
* smaller y coordinates at the top, this is in the *negative y*
* direction. Similarly, *DOWN* means in the *positive y*
* direction.** To reiterate, when you are exploring (filling out)
* from a given pixel, you must first try to fill the pixel to
* it's RIGHT, then the one DOWN from it, then to the LEFT and
* finally UP. If you do them in a different order, your fill may
* still work correctly, but your animations will be different
* from the grading scripts!
* 3. For every k pixels filled, **starting at the kth pixel**, you
* must add a frame to the animation, where k = frameFreq.
*
* For example, if frameFreq is 4, then after the 4th pixel has
* been filled you should add a frame to the animation, then again
* after the 8th pixel, etc. You must only add frames for the
* number of pixels that have been filled, not the number that
* have been checked. So if frameFreq is set to 1, a pixel should
* be filled every frame.
*/
OrderingStructure<RGBAPixel> pixels; //structure to return
OrderingStructure<int> cx; //x axis
OrderingStructure<int> cy; //y axis
bool process[img.width()][img.height()];
for (int i = 0; i < img.width(); i++)
{
for (int j = 0; j <img.height(); j++)
{
process[i][j] = false;
}
}
animation anim; //output
int frame = 0;
RGBAPixel origPixel = *(img(x,y)); //one pix to input
int origRed = origPixel.red;
int origGreen = origPixel.green;
int origBlue = origPixel.blue;
pixels.add(*img(x,y));//put into
cx.add(x);
cy.add(y);
while (!pixels.isEmpty())
{
//remove one point in the structure
RGBAPixel currPixel = pixels.remove();
int currRed = currPixel.red;
int currGreen = currPixel.green;
int currBlue = currPixel.blue;
int currX = cx.remove();
int currY = cy.remove();
int min = pow(origRed-currRed,2)+pow(origGreen-currGreen,2)+pow(origBlue-currBlue,2);
if ((min <= tolerance) && !process[currX][currY])
{
process[currX][currY] = true;//mark
frame++;
*(img(currX,currY)) = fillColor(currX,currY);
if (currX+1 <img.width())
{
//RIGHT
pixels.add(*(img(currX+1,currY)));
cx.add(currX+1);
cy.add(currY);
}
if (currY+1 <img.height())
{
//DOWN
pixels.add(*(img(currX,currY+1)));
cx.add(currX);
cy.add(currY+1);
}
if (currX-1>= 0)
{
//LEFT
pixels.add(*(img(currX-1,currY)));
cx.add(currX-1);
cy.add(currY);
}
if (currY-1>= 0)
{
//DOWN
pixels.add(*(img(currX,currY-1)));
cx.add(currX);
cy.add(currY-1);
}
if (frame % frameFreq == 0)
{
//add the current image to the animation
anim.addFrame(img);
}
}
}
return anim;
}
animation DFSfill(PNG& img, int x, int y, colorPicker & fillColor, int tolerance, int frameFreq)
{
animation anim;
int count = 0;
if( x > img.width()-1 || y > img.height()-1)
return anim;
bool done[img.width()][img.height()];
for(int i=0;i < img.width();i++)
for(int j=0;j < img.height();j++)
{
done[i][j] = false;
}
int origred = img(x,y)->red;
int origgreen = img(x,y)->green;
int origblue = img(x,y)->blue;
int redsqr = 0;
int grnsqr = 0;
int blusqr = 0;
int tolcheck = 0;
Stack<int> rackx;
Stack<int> racky;
int a = 0;
int b = 0;
rackx.push(x);
racky.push(y);
//done[x][y]= true;
while(!(rackx.isEmpty()))
{
a = rackx.pop();
b = racky.pop();
redsqr = (img(a,b)->red-origred) * (img(a,b)->red-origred);
grnsqr = (img(a,b)->green-origgreen) * (img(a,b)->green-origgreen);
blusqr = (img(a,b)->blue-origblue) * (img(a,b)->blue-origblue);
tolcheck = redsqr + grnsqr + blusqr;
if((tolcheck <= tolerance && !done[a][b]))
{
*img(a,b) = fillColor(a,b);
count++;
//done[a][b] = true;
if(a+1 < img.width())
{
if(!done[a+1][b])
{
rackx.push(a+1);
racky.push(b);
//done(right[0],right[1]) = tru
}
}
if(b+1 < img.height())
{
if(!done[a][b+1])
{
rackx.push(a);
racky.push(b+1);
}
}
if(a-1 > 0)
{
if(!done[a-1][b])
{
rackx.push(a-1);
racky.push(b);
}
}
if(b-1 > 0)
{
if(!done[a][b-1])
{
rackx.push(a);
racky.push(b-1);
}
}
}
done[a][b] = true;
if(frameFreq == count )
{
anim.addFrame(img);
count = 0;
}
}
return anim;
}
animation filler::fill( PNG & img, int x, int y,
colorPicker & fillColor, int tolerance, int frameFreq )
{
OrderingStructure<RGBAPixel> sq; //pixel structure
OrderingStructure<int> sqX; //Xcoord structure
OrderingStructure<int> sqY; //Ycoord structure
int** marks = new int *[img.width()]; //array of pointers with size width 0 1 2 3
for(int i = 0; i < img.width(); i++) //array of pointers to arrays of size height x = 0->y = 0 1
{
marks[i] = new int[img.height()];
for(int j = 0; j < img.height(); j++) //set coordinates to mark values e.g 0,1 = 0
marks[i][j] = 0;
}
int count = 0; //count when to add new frame
animation fillAnimation; //animation to return
RGBAPixel origin = (*img(x,y));
sq.add(origin);
sqX.add(x);
sqY.add(y);
while(!sq.isEmpty())
{
RGBAPixel pixel = sq.remove();
int xCoord = sqX.remove();
int yCoord = sqY.remove();
int originRed = origin.red, pixelRed = pixel.red,
originBlue = origin.blue, pixelBlue = pixel.blue,
originGreen = origin.green, pixelGreen = pixel.green;
int toleranceValue = pow((originRed - pixelRed), 2) +
pow((originBlue - pixelBlue), 2) +
pow((originGreen - pixelGreen), 2);
if(marks[xCoord][yCoord] == 0 && toleranceValue <= tolerance)
{
marks[xCoord][yCoord] = 1;
count++;
*img(xCoord,yCoord) = fillColor(xCoord,yCoord);
if(count == frameFreq)
{
fillAnimation.addFrame(img);
count = 0;
}
if(xCoord < img.width() - 1)
{
sqX.add(xCoord + 1);
sqY.add(yCoord);
sq.add(*img(xCoord+1,yCoord));
}
if(yCoord < img.height() - 1)
{
sqX.add(xCoord);
sqY.add(yCoord+1);
sq.add(*img(xCoord,yCoord+1));
}
if(xCoord - 1 >= 0)
{
sqX.add(xCoord-1);
sqY.add(yCoord);
sq.add(*img(xCoord-1,yCoord));
}
if(yCoord - 1 >= 0)
{
sqX.add(xCoord);
sqY.add(yCoord-1);
sq.add(*img(xCoord,yCoord-1));
}
}
}
return fillAnimation;
}
animation filler::fill( PNG & img, int x, int y,
colorPicker & fillColor, int tolerance, int frameFreq ) {
/**
* @todo You need to implement this function!
*
* This is the basic description of a flood-fill algorithm: Every fill
* algorithm requires an ordering structure, which is passed to this
* function via its template parameter. For a breadth-first-search
* fill, that structure is a Queue, for a depth-first-search, that
* structure is a Stack. To begin the algorithm, you simply place the
* given point in the ordering structure. Then, until the structure is
* empty, you do the following:
*
* 1. Remove a point from the ordering structure.
*
* If it has not been processed before and if its color is
* within the tolerance distance (up to and **including**
* tolerance away in square-RGB-space-distance) to the original
* point's pixel color [that is, \f$(currentRed - OriginalRed)^2 +
(currentGreen - OriginalGreen)^2 + (currentBlue -
OriginalBlue)^2 \leq tolerance\f$], then:
* 1. indicate somehow that it has been processed (do not mark it
* "processed" anywhere else in your code)
* 2. change its color in the image using the appropriate
* colorPicker
* 3. add all of its neighbors to the ordering structure, and
* 4. if it is the appropriate frame, send the current PNG to the
* animation (as described below).
* 2. When implementing your breadth-first-search and
* depth-first-search fills, you will need to explore neighboring
* pixels in some order.
*
* While the order in which you examine neighbors does not matter
* for a proper fill, you must use the same order as we do for
* your animations to come out like ours! The order you should put
* neighboring pixels **ONTO** the queue or stack is as follows:
* **RIGHT(+x), DOWN(+y), LEFT(-x), UP(-y). IMPORTANT NOTE: *UP*
* here means towards the top of the image, so since an image has
* smaller y coordinates at the top, this is in the *negative y*
* direction. Similarly, *DOWN* means in the *positive y*
* direction.** To reiterate, when you are exploring (filling out)
* from a given pixel, you must first try to fill the pixel to
* it's RIGHT, then the one DOWN from it, then to the LEFT and
* finally UP. If you do them in a different order, your fill may
* still work correctly, but your animations will be different
* from the grading scripts!
* 3. For every k pixels filled, **starting at the kth pixel**, you
* must add a frame to the animation, where k = frameFreq.
*
* For example, if frameFreq is 4, then after the 4th pixel has
* been filled you should add a frame to the animation, then again
* after the 8th pixel, etc. You must only add frames for the
* number of pixels that have been filled, not the number that
* have been checked. So if frameFreq is set to 1, a pixel should
* be filled every frame.
*/
OrderingStructure <int> xCoordinates;
OrderingStructure <int> yCoordinates;
animation myAnimation;
int frameCount = 0;
std::vector <bool> checkArray(img.height()*img.width());
for (size_t i = 0; i < img.height(); i++)
{
for(size_t j = 0; j < img.width(); j++)
{
checkArray[i*img.width()+j] = false;
}
}
xCoordinates.add(x);
yCoordinates.add(y);
int origin_r = img(x,y)->red;
int origin_g = img(x,y)->green;
int origin_b = img(x,y)->blue;
while(!xCoordinates.isEmpty())
{
int currX = xCoordinates.remove();
int currY = yCoordinates.remove();
RGBAPixel currPixel = *img(currX,currY);
int colorDistance = pow(currPixel.red-origin_r,2) + pow(currPixel.green-origin_g,2) + pow(currPixel.blue -origin_b,2);
if((!checkArray[currY*img.width()+currX])&& colorDistance <= tolerance)
{
checkArray[currY*img.width()+currX] = true;
RGBAPixel tempPixel = fillColor(currX,currY);
img(currX,currY)->red = tempPixel.red;
img(currX,currY)->green = tempPixel.green;
img(currX,currY)->blue = tempPixel.blue;
//right
if(currX + 1 < int(img.height()))
{
xCoordinates.add(currX+1);
yCoordinates.add(currY);
}
//down
if(currY + 1 < int(img.height()))
{
xCoordinates.add(currX);
yCoordinates.add(currY+1);
}
//left
if(currX - 1 >= 0)
{
xCoordinates.add(currX-1);
yCoordinates.add(currY);
}
//up
if(currY - 1 >= 0)
{
xCoordinates.add(currX);
yCoordinates.add(currY-1);
}
if((++frameCount) % frameFreq == 0)
myAnimation.addFrame(img);
}
}
return myAnimation;
}
animation filler::fill(PNG& img, int x, int y, colorPicker& fillColor,
int tolerance, int frameFreq)
{
/**
* @todo You need to implement this function!
*
* This is the basic description of a flood-fill algorithm: Every fill
* algorithm requires an ordering structure, which is passed to this
* function via its template parameter. For a breadth-first-search
* fill, that structure is a Queue, for a depth-first-search, that
* structure is a Stack. To begin the algorithm, you simply place the
* given point in the ordering structure. Then, until the structure is
* empty, you do the following:
*
* 1. Remove a point from the ordering structure.
*
* If it has not been processed before and if its color is
* within the tolerance distance (up to and **including**
* tolerance away in square-RGB-space-distance) to the original
* point's pixel color [that is, \f$(currentRed - OriginalRed)^2 +
(currentGreen - OriginalGreen)^2 + (currentBlue -
OriginalBlue)^2 \leq tolerance\f$], then:
* 1. indicate somehow that it has been processed (do not mark it
* "processed" anywhere else in your code)
* 2. change its color in the image using the appropriate
* colorPicker
* 3. add all of its neighbors to the ordering structure, and
* 4. if it is the appropriate frame, send the current PNG to the
* animation (as described below).
* 2. When implementing your breadth-first-search and
* depth-first-search fills, you will need to explore neighboring
* pixels in some order.
*
* While the order in which you examine neighbors does not matter
* for a proper fill, you must use the same order as we do for
* your animations to come out like ours! The order you should put
* neighboring pixels **ONTO** the queue or stack is as follows:
* **RIGHT(+x), DOWN(+y), LEFT(-x), UP(-y). IMPORTANT NOTE: *UP*
* here means towards the top of the image, so since an image has
* smaller y coordinates at the top, this is in the *negative y*
* direction. Similarly, *DOWN* means in the *positive y*
* direction.** To reiterate, when you are exploring (filling out)
* from a given pixel, you must first try to fill the pixel to
* it's RIGHT, then the one DOWN from it, then to the LEFT and
* finally UP. If you do them in a different order, your fill may
* still work correctly, but your animations will be different
* from the grading scripts!
* 3. For every k pixels filled, **starting at the kth pixel**, you
* must add a frame to the animation, where k = frameFreq.
*
* For example, if frameFreq is 4, then after the 4th pixel has
* been filled you should add a frame to the animation, then again
* after the 8th pixel, etc. You must only add frames for the
* number of pixels that have been filled, not the number that
* have been checked. So if frameFreq is set to 1, a pixel should
* be filled every frame.
*/
OrderingStructure<int> xcoord;
OrderingStructure<int> ycoord;
xcoord.add(x);
ycoord.add(y);
animation a;
int counter = 0;
int h = img.height();
int w = img.width();
bool** processed = new bool*[h];
for (int i = 0; i < h; i++){
processed[i] = new bool[w];
for (int j = 0; j < w; j++){
processed[i][j] = false;
}
}
int oriRed = img(x,y) -> red;
int oriGreen = img(x,y) -> green;
int oriBlue = img(x,y) -> blue;
while (!xcoord.isEmpty() && !ycoord.isEmpty()){
x = xcoord.remove();
y = ycoord.remove();
int curRed = img(x,y) -> red;
int curGreen = img(x,y) -> green;
int curBlue = img(x,y) -> blue;
int colorDist = (curRed - oriRed)*(curRed - oriRed) + (curGreen - oriGreen)*(curGreen - oriGreen) + (curBlue - oriBlue)*(curBlue - oriBlue);
if (!processed[y][x] && colorDist <= tolerance){
processed[y][x] = true;
img(x,y) -> red = fillColor(x,y).red;
img(x,y) -> green = fillColor(x,y).green;
img(x,y) -> blue = fillColor(x,y).blue;
if (x + 1 < w && !processed[y][x+1]){
xcoord.add(x + 1);
ycoord.add(y);
}
if (y + 1 < h && !processed[y+1][x]){
xcoord.add(x);
ycoord.add(y + 1);
}
if (x - 1 >= 0 && !processed[y][x-1]){
xcoord.add(x - 1);
ycoord.add(y);
}
if (y - 1 >= 0 && !processed[y-1][x]){
xcoord.add(x);
ycoord.add(y - 1);
}
counter++;
if (counter % frameFreq == 0)
a.addFrame(img);
}
}
for (int i = 0; i < h; i++)
delete [] processed[i];
delete [] processed;
return a;
}