void pricing(hls::stream<float> in, hls::stream<float> out, hls::stream<float> out2, float strike_price) {
//#pragma HLS PIPELINE II=1
const int BLOCK = 64;
static ap_uint<32> res_cnt[BLOCK];
static float res_sum[BLOCK];
static float res_prod[BLOCK];
for (int i = 0; i < BLOCK; ++i) {
#pragma HLS PIPELINE II=1
float path = in.read();
float res = max_0(hls::expf(path) - strike_price);
ap_uint<32> l_cnt = res_cnt[i];
float l_sum = res_sum[i];
float l_prod = res_prod[i];
ap_uint<32> n_cnt = l_cnt + 1;
float delta = res - l_sum;
float n_sum = l_sum + delta / n_cnt;
float n_prod = l_prod + delta * (res - n_sum);
res_cnt[i] = n_cnt;
res_sum[i] = n_sum;
res_prod[i] = n_prod;
out.write(res_sum[i]);
out2.write(res_prod[i]);
}
//std::max(0.f, hls::expf(path) - strike_price);
}
void dut(
hls::stream<bit32_t> &strm_in,
hls::stream<bit32_t> &strm_out
)
{
// -----------------------------
// YOUR CODE GOES HERE
// -----------------------------
digit in_digit;
bit4_t out_bit4;
// ------------------------------------------------------
// Input processing
// ------------------------------------------------------
// read the two input 32-bit words (low word first)
bit32_t input_lo = strm_in.read();
bit32_t input_hi = strm_in.read();
// Convert input raw bits to digit 49-bit representation via bit slicing
in_digit(31, 0) = input_lo;
in_digit(in_digit.length()-1, 32) = input_hi;
// ------------------------------------------------------
// Call digitrec
// ------------------------------------------------------
out_bit4 = digitrec( in_digit );
// ------------------------------------------------------
// Output processing
// ------------------------------------------------------
// Write out the recognized digit (0-9)
strm_out.write( out_bit4(out_bit4.length()-1, 0) );
}
void fir_sw(hls::stream<int> &input_val, hls::stream<int> &output_val)
{
int i;
static short shift_reg[TAPS] = {0};
const short coeff[TAPS] = {6,0,-4,-3,5,6,-6,-13,7,44,64,44,7,-13,
-6,6,5,-3,-4,0,6};
for(i=0; i < RUN_LENGTH; i++){
int sample;
sample = input_val.read();
//Shift Register
for(int j=0; j < TAPS-1; j++){
shift_reg[j] = shift_reg[j+1];
}
shift_reg[TAPS-1] = sample;
//Filter Operation
int acc = 0;
for(int k=0; k < TAPS; k++){
acc += shift_reg[k] * coeff[k];
}
output_val.write(acc);
}
}
/**
* Write the directions as u32 to the output AXI stream
*/
void writeDirections(hls::stream<uint32>& out, uint16 numDirections) {
#pragma HLS INLINE
out.write(numDirections);
uint16 directionIx = 0;
writeDirectionsLoop: for (uint8 i = 0; i < MAX_NUM_DIRECTIONS / DIRECTIONS_IN_BUS; i++) {
#pragma HLS LOOP_TRIPCOUNT min=8 max=32 // Min: MIN_NUM_DIRECTIONS / DIRECTIONS_IN_BUS (8) Max: MAX_NUM_DIRECTIONS / DIRECTIONS_IN_BUS (32) Actual: numDirections
uint32 output = 0;
// Compress from a series of u8 to a smaller series of u32 with padding
writeDirectionsShiftLoop: for (uint8 j = 0; j < DIRECTIONS_IN_BUS; j++) {
#pragma HLS UNROLL
output <<= DIRECTION_SIZE;
uint8 padChar = 0;
output |= i * DIRECTIONS_IN_BUS + j < numDirections ? directions[directionIx + j] : padChar;
}
out.write(output);
directionIx += DIRECTIONS_IN_BUS;
if (directionIx >= numDirections) {
break;
}
}
}
void toplevel(hls::stream<uint32>& in, hls::stream<uint32>& out) {
#pragma HLS INTERFACE ap_fifo port=in
#pragma HLS INTERFACE ap_fifo port=out
#pragma HLS RESOURCE variable=in core=AXI4Stream
#pragma HLS RESOURCE variable=out core=AXI4Stream
#pragma HLS INTERFACE ap_ctrl_none port=return
#pragma HLS ARRAY_PARTITION variable=openings complete dim=1
#pragma HLS ARRAY_PARTITION variable=inGrid complete dim=1
#pragma HLS ARRAY_MAP variable=directions instance=instance1 horizontal
#pragma HLS ARRAY_MAP variable=tile instance=instance1 horizontal
uint8 tileCoords = in.read();
uint8 tileSize = in.read();
uint8 tileDataLen = in.read(); // Number of 32-bit bits
readData(in, tileDataLen);
uint8 numOpenings = findOpenings(tileSize);
out.write(tileCoords);
out.write(numOpenings);
if (numOpenings > 0) {
writeEntrance(out);
findDeadEnds(tileSize);
uint16 numDirections = findPath(tileSize);
writeDirections(out, numDirections);
}
}
void antithetic(
hls::stream<float> &rn_in,
hls::stream<float> &rn_out_1,
hls::stream<float> &rn_out_2)
{
#pragma HLS interface ap_fifo port=rn_in
#pragma HLS resource core=AXI4Stream variable=rn_in
#pragma HLS interface ap_fifo port=rn_out_1
#pragma HLS resource core=AXI4Stream variable=rn_out_1
#pragma HLS interface ap_fifo port=rn_out_2
#pragma HLS resource core=AXI4Stream variable=rn_out_2
#pragma HLS interface ap_ctrl_none port=return
//for (int i = 0; i < 10 / 2; ++i) {
{
//while (true) {
#pragma HLS PIPELINE II=2
float r1 = rn_in.read();
float r2 = rn_in.read();
rn_out_1.write(r1);
rn_out_2.write(r2);
rn_out_1.write(negate(r1));
rn_out_2.write(negate(r2));
}
}
void gauss_transform(
hls::stream<uint32_t> &uniform_rns,
hls::stream<float> &gaussian_rns) {
#pragma HLS interface ap_fifo port=uniform_rns
#pragma HLS resource core=AXI4Stream variable=uniform_rns
#pragma HLS interface ap_fifo port=gaussian_rns
#pragma HLS resource core=AXI4Stream variable=gaussian_rns
#pragma HLS interface ap_ctrl_none port=return
float u1, u2, r, z1, z2;
while (true){
//for (int i = 0; i < 100/2; ++i) {
#pragma HLS PIPELINE II=2
// intervall (0:1]
u1 = ((float)uniform_rns.read() + 1.f) * (float)(1.0 / 4294967296.0);
// intervall (0:2PI]
u2 = ((float)uniform_rns.read() + 1.f) * (float)(2 * M_PI / 4294967296.0);
r = hls::sqrtf(-2 * hls::logf(u1));
z1 = r * hls::cosf(u2);
z2 = r * hls::sinf(u2);
gaussian_rns.write(z1);
gaussian_rns.write(z2);
}
}
void dut(
hls::stream<bit32_t> &strm_in,
hls::stream<bit32_t> &strm_out
)
{
// Declare the input and output variables
complex<float> out[4096];
complex<float> complex_In1[4096];
complex<float> complex_In2[4096];
float input_data_re = 0;
//-------------------------------------------------------
// Input processing
//-------------------------------------------------------
// Read the two input 32-bit words
bit32_t input1_lo;
bit32_t input2_hi;
bit32_t output_r;
bit32_t output_i;
for(int i = 0; i < 4096 ;i++)
{
input1_lo = strm_in.read();
input2_hi = strm_in.read();
input_data_re = input1_lo;
complex_In1[i] = complex<float>(input_data_re, 0);
input_data_re = input2_hi;
complex_In2[i] = complex<float>(input_data_re, 0);
}
// for(int m = 0; m < 4096 ;m++)
// {
//// input_data_re = in1[m];
// complex_In1[m] = complex<float>(80, 0);
//// input_data_re = in2[m];
// complex_In2[m] = complex<float>(80, 0);
// }
// ------------------------------------------------------
// Call Hybrid Imaging
// ------------------------------------------------------
hybrid_image(12, complex_In1, complex_In2, out );
// ------------------------------------------------------
// Output processing
// ------------------------------------------------------
// Write out the computed digit value
for(int i = 0; i < 4096 ;i++)
{
// printf("%f\n",out[i]);
// output = out[i];
output_r = out[i].real();
output_i = out[i].imag();
strm_out.write(output_r);
strm_out.write(output_i );
}
}
void fill_gaussian_rng_stream(hls::stream<calc_t> &rns, unsigned size) {
double z0, z1;
for (unsigned i = 0; i < size; ++i) {
box_muller(z0, z1);
rns.write(z0);
if (++i < size)
rns.write(z1);
}
}
// -----------------------------------------------------------
void accumSW( const uint32_t stepsMC,
const uint32_t pathsMC,
hls::stream<float> &inData,
hls::stream<float> &outAccum )
{
printf("accumSW\n");
float sums[ACCUM_ELEM];
#pragma HLS RESOURCE variable=sums core=RAM_2P_BRAM
#pragma HLS DEPENDENCE variable=sums false
stepsLoop:for(uint32_t step=0; step<=stepsMC; ++step)
{
// ------------------------------------------
resetLoop:for(uint8_t i=0; i<ACCUM_ELEM; ++i)
{
#pragma HLS PIPELINE II=1 enable_flush
sums[i] = (float) 0.0f;
}
// ------------------------------------------
uint8_t index = (uint8_t) 0;
pathsLoop:for(uint32_t i=0; i<pathsMC; ++i)
{
#pragma HLS PIPELINE II=1 enable_flush
float data = inData.read();
float oldSum = sums[index];
float newSum = oldSum + data;
sums[index] = newSum;
index = (index<(ACCUM_ELEM-1))?++index:(uint8_t)0;
}
// ------------------------------------------
float totalSum = (float) 0.0f;
totalLoop:for(uint8_t i=0; i<ACCUM_ELEM;++i)
{
#pragma HLS PIPELINE II=1
totalSum += sums[i];
}
// ------------------------------------------
outAccum.write(totalSum);
}
return;
}
void fe_wfl(hls::stream< ap_uint<32> > sampleFifo, hls::stream< ap_uint<32> > featureFifo, ap_uint<8> windowSize) {
#pragma HLS INTERFACE ap_ctrl_none port=return
#pragma HLS INTERFACE ap_fifo port=featureFifo
#pragma HLS INTERFACE ap_fifo port=sampleFifo
ap_uint<32> data;
ap_int<32> wflChannel1 = 0;
ap_int<32> wflChannel2 = 0;
ap_int<16> sampleChannel1 = 0;
ap_int<16> sampleChannel2 = 0;
ap_int<16> prevSampleChannel1 = 0;
ap_int<16> prevSampleChannel2 = 0;
ap_uint<8> cntSamples = 0;
// Wait for Samples to arrive in FIFO
while( windowSize == 0 ) {
}
while(1) {
wflChannel1 = 0;
wflChannel2 = 0;
// Count zero-crossing for channel 1 & 2
for(cntSamples = 0; cntSamples < windowSize; cntSamples++) {
// Read data from Sample-FIFO
// 2 16 bit Samples at one position in 32 bit FIFO => Process 2 channels in parallel
data = sampleFifo.read();
sampleChannel1 = data(15, 0);
sampleChannel2 = data(31, 16);
if (cntSamples > 0) {
wflChannel1 += abs2(sampleChannel1 - prevSampleChannel1);
wflChannel2 += abs2(sampleChannel2 - prevSampleChannel2);
}
prevSampleChannel1 = sampleChannel1;
prevSampleChannel2 = sampleChannel2;
}
// Write back features to Feature-FIFO
featureFifo.write(wflChannel1);
featureFifo.write(wflChannel2);
}
}
// -----------------------------------------------------------
void lsupdate2SW ( const uint32_t stepsMC,
const uint32_t pathsMC,
const float discount,
hls::stream<float> &contin_in,
hls::stream<float> &payoff_in,
hls::stream<float> &cashFlow_in,
hls::stream<float> &cashFlow_out,
hls::stream<float> &cashFlowDisc_out,
hls::stream<float> &toAccum_out )
{
printf("lsupdate2SW\n");
zerosLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1 enable_flush
// ---------------------------------
// write to outputs
cashFlow_out.write((float) 0.0f);
cashFlowDisc_out.write((float) 0.0f);
}
stepsLoop:for(uint32_t step=0; step<=stepsMC; ++step)
{
pathsLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1 enable_flush
float continuation = contin_in.read();
float payoff = payoff_in.read();
float cashFlow = cashFlow_in.read();
float discountedCashFlow = discount * cashFlow;
// ---------------------------------
float newY;
if( (payoff > (float) 0.0f) && (payoff >= (float) continuation) )
newY = payoff;
else
newY = discountedCashFlow;
// ---------------------------------
// write to outputs
if(step < stepsMC)
cashFlow_out.write(newY);
if(step < stepsMC)
cashFlowDisc_out.write(discount * newY);
if(step == stepsMC)
toAccum_out.write(newY);
}
}
return;
}
void cflowaccumregio( const uint32_t pathsMC,
float *totalSum,
hls::stream<float> &inData )
{
#pragma HLS INTERFACE s_axilite port=return bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=pathsMC bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=totalSum bundle=CONTROL
#pragma HLS INTERFACE axis register port=inData
////////////////////////////////////////////////////////////////////////////////////////////////////////////
//static float sums[N];
float sums[NELEMENTS];
#pragma HLS RESOURCE variable=sums core=RAM_2P_BRAM
#pragma HLS dependence variable=sums false
resetLoop:for(uint8_t i=0; i<NELEMENTS; ++i)
{
#pragma HLS PIPELINE II=1
sums[i] = (float) 0.0f;
}
uint8_t index = (uint8_t) 0;
pathsLoop:for(uint32_t i=0; i<pathsMC; ++i)
{
#pragma HLS PIPELINE II=1
float data = inData.read();
float oldSum = sums[index];
float newSum = oldSum + data;
sums[index] = newSum;
index = (index<(NELEMENTS-1))?++index:(uint8_t)0;
}
float total = (float) 0.0f;
totalLoop:for(uint8_t i=0; i<NELEMENTS;++i)
{
#pragma HLS PIPELINE II=1
total += sums[i];
}
*totalSum = total;
return;
}
//Top-level function
void toplevel(hls::stream<uint32> &input, hls::stream<uint32> &output) {
#pragma HLS INTERFACE ap_fifo port=input
#pragma HLS INTERFACE ap_fifo port=output
#pragma HLS RESOURCE variable=input core=AXI4Stream
#pragma HLS RESOURCE variable=output core=AXI4Stream
#pragma HLS INTERFACE ap_ctrl_none port=return
uint32 command;
init();
side = input.read();
ntiles = side * side;
for(u8 t = 0; t < ntiles; t++)
for (u8 e = 0; e < 4; e++)
tiles[t][e] = input.read();
mapcolours();
// we start off with tile 0 in position 0
avail &= ~BIT36(0);
seq = 1;
while (!terminate) {
if (seq == 1)
solve();
if (terminate) {
output.write(0);
break;
}
/* use magic flag to enforce sequencing */
seq = 0;
output.write(1);
if (seq == 0)
command = input.read();
seq = 1;
/* command 0: terminate */
if (command == 0)
break;
/* command 1: write output */
if (command == 1)
for (u8 p = 0; p < ntiles; p++)
for(u8 e = 0; e < 4; e++)
output.write(colour(p, e));
/* any other command (canonically 2) will cause search
* to continue without output */
if (seq == 0)
backtrack();
seq = 1;
}
}
/**
* Read data from the AXI stream and convert from uint32 to uint1
*/
void readData(hls::stream<uint32> &in, uint8 tileDataLen) {
#pragma HLS INLINE
readLoop: for (uint8 i = 0; i < tileDataLen; i++) {
#pragma HLS LOOP_TRIPCOUNT min=5 max=18 // Min: MIN_TILE_DATA_32 (5) Max: MAX_TILE_DATA_32 (18) Actual: tileDataLen
inGrid[i] = in.read();
// Convert data from 18 * 32 => 576 * 1
readShiftLoop: for (uint8 j = 0; j < BUS_WIDTH; j++) {
#pragma HLS UNROLL
uint16 ix = i * BUS_WIDTH + (BUS_WIDTH - j - 1); // (BUS_WIDTH - j - 1) necessary to preserve direction
tile[ix] = (inGrid[i] & (1 << j)) ? 1 : 0;
}
}
}
/**
* Write out the entrance coordinates and directions
*/
void writeEntrance(hls::stream<uint32>& out) {
#pragma HLS INLINE
uint32 output = 0;
output |= openings[0]; // Entrance row
output <<= 4;
output |= openings[1]; // Entrance column
output <<= 4;
output |= openings[2]; // Entrance side
output <<= 4;
output |= openings[3]; // Exit row
output <<= 4;
output |= openings[4]; // Exit col
output <<= 4;
output |= openings[5]; // Exit side
out.write(output);
}
void lsdatagenregio ( const uint32_t stepsMC,
const uint32_t pathsMC,
const float K,
const uint32_t callPut,
volatile uint32_t *peekStep,
volatile uint32_t *peekPath,
hls::stream<float> &stock,
hls::stream<float> &cashFlow,
hls::stream<float> &stream_x0,
hls::stream<float> &stream_x1,
hls::stream<float> &stream_x2,
hls::stream<float> &stream_x3,
hls::stream<float> &stream_x4,
hls::stream<float> &stream_y,
hls::stream<float> &stream_yx,
hls::stream<float> &stream_yx2 )
{
#pragma HLS INTERFACE axis register port=stock
#pragma HLS INTERFACE axis register port=cashFlow
#pragma HLS INTERFACE axis register port=stream_x0
#pragma HLS INTERFACE axis register port=stream_x1
#pragma HLS INTERFACE axis register port=stream_x2
#pragma HLS INTERFACE axis register port=stream_x3
#pragma HLS INTERFACE axis register port=stream_x4
#pragma HLS INTERFACE axis register port=stream_y
#pragma HLS INTERFACE axis register port=stream_yx
#pragma HLS INTERFACE axis register port=stream_yx2
#pragma HLS INTERFACE s_axilite port=peekStep bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=peekPath bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=callPut bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=K bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=pathsMC bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=stepsMC bundle=CONTROL
#pragma HLS INTERFACE s_axilite port=return bundle=CONTROL
*peekStep = 0xFFFFFFFF;
*peekPath = 0xFFFFFFFF;
stepsLoop:for(uint32_t step=0; step < stepsMC; ++step)
{
*peekStep = step;
pathsLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
//#pragma HLS PIPELINE II=1 enable_flush
#pragma HLS PIPELINE II=1
float s = stock.read();
float cflow = cashFlow.read();
// ---------------------------------
// in-the-money calculation
float diff = (s-K);
float payoff;
if(callPut == 0)
payoff = diff;
else
payoff = -diff;
bool inTheMoney;
if( payoff > 0.0f )
inTheMoney = true;
else
inTheMoney = false;
// ---------------------------------
// basis functions
float s2 = s*s;
float x0;
float x1;
float x2;
float y;
if(inTheMoney == true)
{
x0 = (float) 1.0f;
x1 = (float) s;
x2 = (float) s2;
y = (float) cflow;
}
else
{
x0 = (float) 0.0f;
x1 = (float) 0.0f;
x2 = (float) 0.0f;
y = (float) 0.0f;
}
// remaining multipliers
float x3 = x1*x2;
float x4 = x2*x2;
float yx = y*x1;
float yx2 = y*x2;
// write to streams
stream_x0.write(x0);
stream_x1.write(x1);
stream_x2.write(x2);
stream_x3.write(x3);
stream_x4.write(x4);
stream_y.write(y);
stream_yx.write(yx);
stream_yx2.write(yx2);
//*peekStep = step;
*peekPath = path;
}
}
return;
}
void pyrconstuct_top (
std::complex<ap_fixed<16, 1, (ap_q_mode) 5, (ap_o_mode)3, 0> > imgIn[512],
hls::stream<std::complex<ap_fixed<17, 6, (ap_q_mode) 0, (ap_o_mode)3, 0> > >& pyrFilOut,
const int nL)
{
fstream wrapc_switch_file_token;
wrapc_switch_file_token.open(".hls_cosim_wrapc_switch.log");
int AESL_i;
if (wrapc_switch_file_token.good())
{
static unsigned AESL_transaction_pc = 0;
string AESL_token;
string AESL_num;
static AESL_FILE_HANDLER aesl_fh;
// define output stream variables: "pyrFilOut"
std::vector<std::complex<ap_fixed<17, 6, (ap_q_mode) 0, (ap_o_mode)3, 0> > > aesl_tmp_0;
int aesl_tmp_1;
int aesl_tmp_2 = 0;
// read output stream size: "pyrFilOut"
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, AESL_token); // [[transaction]]
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, AESL_num); // transaction number
if (atoi(AESL_num.c_str()) == AESL_transaction_pc)
{
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, AESL_token); // pop_size
aesl_tmp_1 = atoi(AESL_token.c_str());
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, AESL_token); // [[/transaction]]
}
// output port post check: "pyrFilOut_V"
aesl_fh.read(AUTOTB_TVOUT_PC_pyrFilOut_V, AESL_token); // [[transaction]]
if (AESL_token != "[[transaction]]")
{
exit(1);
}
aesl_fh.read(AUTOTB_TVOUT_PC_pyrFilOut_V, AESL_num); // transaction number
if (atoi(AESL_num.c_str()) == AESL_transaction_pc)
{
aesl_fh.read(AUTOTB_TVOUT_PC_pyrFilOut_V, AESL_token); // data
std::vector<sc_bv<34> > pyrFilOut_V_pc_buffer;
int i = 0;
while (AESL_token != "[[/transaction]]")
{
bool no_x = false;
bool err = false;
// search and replace 'X' with "0" from the 1st char of token
while (!no_x)
{
size_t x_found = AESL_token.find('X');
if (x_found != string::npos)
{
if (!err)
{
cerr << "@W [SIM-201] RTL produces unknown value 'X' on port 'pyrFilOut_V', possible cause: There are uninitialized variables in the C design." << endl;
err = true;
}
AESL_token.replace(x_found, 1, "0");
}
else
{
no_x = true;
}
}
no_x = false;
// search and replace 'x' with "0" from the 3rd char of token
while (!no_x)
{
size_t x_found = AESL_token.find('x', 2);
if (x_found != string::npos)
{
if (!err)
{
cerr << "@W [SIM-201] RTL produces unknown value 'X' on port 'pyrFilOut_V', possible cause: There are uninitialized variables in the C design." << endl;
err = true;
}
AESL_token.replace(x_found, 1, "0");
}
else
{
no_x = true;
}
}
// push token into output port buffer
if (AESL_token != "")
{
pyrFilOut_V_pc_buffer.push_back(AESL_token.c_str());
i++;
}
aesl_fh.read(AUTOTB_TVOUT_PC_pyrFilOut_V, AESL_token); // data or [[/transaction]]
if (AESL_token == "[[[/runtime]]]" || aesl_fh.eof(AUTOTB_TVOUT_PC_pyrFilOut_V))
{
exit(1);
}
}
// correct the buffer size the current transaction
if (i != aesl_tmp_1)
{
aesl_tmp_1 = i;
}
if (aesl_tmp_1 > 0 && aesl_tmp_0.size() < aesl_tmp_1)
{
int aesl_tmp_0_size = aesl_tmp_0.size();
for (int tmp_aesl_tmp_0 = 0; tmp_aesl_tmp_0 < aesl_tmp_1 - aesl_tmp_0_size; tmp_aesl_tmp_0++)
{
std::complex<ap_fixed<17, 6, (ap_q_mode) 0, (ap_o_mode)3, 0> > tmp;
aesl_tmp_0.push_back(tmp);
}
}
// ***********************************
if (i > 0)
{
// RTL Name: pyrFilOut_V
{
// bitslice(16, 0)
// {
// celement: pyrFilOut.V._M_real.V(16, 0)
// {
sc_lv<17>* pyrFilOut_V__M_real_V_lv0_0_1519_1 = new sc_lv<17>[1520];
// }
// }
// bitslice(33, 17)
// {
// celement: pyrFilOut.V._M_imag.V(16, 0)
// {
sc_lv<17>* pyrFilOut_V__M_imag_V_lv0_0_1519_1 = new sc_lv<17>[1520];
// }
// }
// bitslice(16, 0)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_real.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
if (&(aesl_tmp_0[0].real()) != NULL) // check the null address if the c port is array or others
{
pyrFilOut_V__M_real_V_lv0_0_1519_1[hls_map_index++].range(16, 0) = sc_bv<17>(pyrFilOut_V_pc_buffer[hls_map_index].range(16, 0));
}
}
}
}
// bitslice(33, 17)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_imag.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
if (&(aesl_tmp_0[0].imag()) != NULL) // check the null address if the c port is array or others
{
pyrFilOut_V__M_imag_V_lv0_0_1519_1[hls_map_index++].range(16, 0) = sc_bv<17>(pyrFilOut_V_pc_buffer[hls_map_index].range(33, 17));
}
}
}
}
// bitslice(16, 0)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_real.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
// sub : i_0
// ori_name : aesl_tmp_0[i_0].real()
// sub_1st_elem : 0
// ori_name_1st_elem : aesl_tmp_0[0].real()
// output_left_conversion : (aesl_tmp_0[i_0].real()).range()
// output_type_conversion : (pyrFilOut_V__M_real_V_lv0_0_1519_1[hls_map_index++]).to_string(SC_BIN).c_str()
if (&(aesl_tmp_0[0].real()) != NULL) // check the null address if the c port is array or others
{
(aesl_tmp_0[i_0].real()).range() = (pyrFilOut_V__M_real_V_lv0_0_1519_1[hls_map_index++]).to_string(SC_BIN).c_str();
}
}
}
}
// bitslice(33, 17)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_imag.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
// sub : i_0
// ori_name : aesl_tmp_0[i_0].imag()
// sub_1st_elem : 0
// ori_name_1st_elem : aesl_tmp_0[0].imag()
// output_left_conversion : (aesl_tmp_0[i_0].imag()).range()
// output_type_conversion : (pyrFilOut_V__M_imag_V_lv0_0_1519_1[hls_map_index++]).to_string(SC_BIN).c_str()
if (&(aesl_tmp_0[0].imag()) != NULL) // check the null address if the c port is array or others
{
(aesl_tmp_0[i_0].imag()).range() = (pyrFilOut_V__M_imag_V_lv0_0_1519_1[hls_map_index++]).to_string(SC_BIN).c_str();
}
}
}
}
}
}
}
// push back output stream: "pyrFilOut"
for (int i = 0; i < aesl_tmp_1; i++)
{
pyrFilOut.write(aesl_tmp_0[i]);
}
AESL_transaction_pc++;
}
else
{
static unsigned AESL_transaction;
static AESL_FILE_HANDLER aesl_fh;
// "imgIn_M_real_V"
char* tvin_imgIn_M_real_V = new char[50];
aesl_fh.touch(AUTOTB_TVIN_imgIn_M_real_V);
// "imgIn_M_imag_V"
char* tvin_imgIn_M_imag_V = new char[50];
aesl_fh.touch(AUTOTB_TVIN_imgIn_M_imag_V);
// "pyrFilOut_V"
char* tvin_pyrFilOut_V = new char[50];
aesl_fh.touch(AUTOTB_TVIN_pyrFilOut_V);
char* tvout_pyrFilOut_V = new char[50];
aesl_fh.touch(AUTOTB_TVOUT_pyrFilOut_V);
char* wrapc_stream_size_out_pyrFilOut_V = new char[50];
aesl_fh.touch(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V);
char* wrapc_stream_egress_status_pyrFilOut_V = new char[50];
aesl_fh.touch(WRAPC_STREAM_EGRESS_STATUS_pyrFilOut_V);
static INTER_TCL_FILE tcl_file(INTER_TCL);
int leading_zero;
// dump stream tvin: "pyrFilOut"
std::vector<std::complex<ap_fixed<17, 6, (ap_q_mode) 0, (ap_o_mode)3, 0> > > aesl_tmp_0;
int aesl_tmp_1 = 0;
while (!pyrFilOut.empty())
{
aesl_tmp_0.push_back(pyrFilOut.read());
aesl_tmp_1++;
}
// [[transaction]]
sprintf(tvin_imgIn_M_real_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(AUTOTB_TVIN_imgIn_M_real_V, tvin_imgIn_M_real_V);
sc_bv<16>* imgIn_M_real_V_tvin_wrapc_buffer = new sc_bv<16>[512];
// RTL Name: imgIn_M_real_V
{
// bitslice(15, 0)
{
int hls_map_index = 0;
// celement: imgIn._M_real.V(15, 0)
{
// carray: (0) => (511) @ (1)
for (int i_0 = 0; i_0 <= 511; i_0 += 1)
{
// sub : i_0
// ori_name : imgIn[i_0].real()
// sub_1st_elem : 0
// ori_name_1st_elem : imgIn[0].real()
// regulate_c_name : imgIn__M_real_V
// input_type_conversion : (imgIn[i_0].real()).range().to_string(SC_BIN).c_str()
if (&(imgIn[0].real()) != NULL) // check the null address if the c port is array or others
{
sc_lv<16> imgIn__M_real_V_tmp_mem;
imgIn__M_real_V_tmp_mem = (imgIn[i_0].real()).range().to_string(SC_BIN).c_str();
imgIn_M_real_V_tvin_wrapc_buffer[hls_map_index++].range(15, 0) = imgIn__M_real_V_tmp_mem.range(15, 0);
}
}
}
}
}
// dump tv to file
for (int i = 0; i < 512; i++)
{
sprintf(tvin_imgIn_M_real_V, "%s\n", (imgIn_M_real_V_tvin_wrapc_buffer[i]).to_string(SC_HEX).c_str());
aesl_fh.write(AUTOTB_TVIN_imgIn_M_real_V, tvin_imgIn_M_real_V);
}
tcl_file.set_num(512, &tcl_file.imgIn_M_real_V_depth);
sprintf(tvin_imgIn_M_real_V, "[[/transaction]] \n");
aesl_fh.write(AUTOTB_TVIN_imgIn_M_real_V, tvin_imgIn_M_real_V);
// release memory allocation
delete [] imgIn_M_real_V_tvin_wrapc_buffer;
// [[transaction]]
sprintf(tvin_imgIn_M_imag_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(AUTOTB_TVIN_imgIn_M_imag_V, tvin_imgIn_M_imag_V);
sc_bv<16>* imgIn_M_imag_V_tvin_wrapc_buffer = new sc_bv<16>[512];
// RTL Name: imgIn_M_imag_V
{
// bitslice(15, 0)
{
int hls_map_index = 0;
// celement: imgIn._M_imag.V(15, 0)
{
// carray: (0) => (511) @ (1)
for (int i_0 = 0; i_0 <= 511; i_0 += 1)
{
// sub : i_0
// ori_name : imgIn[i_0].imag()
// sub_1st_elem : 0
// ori_name_1st_elem : imgIn[0].imag()
// regulate_c_name : imgIn__M_imag_V
// input_type_conversion : (imgIn[i_0].imag()).range().to_string(SC_BIN).c_str()
if (&(imgIn[0].imag()) != NULL) // check the null address if the c port is array or others
{
sc_lv<16> imgIn__M_imag_V_tmp_mem;
imgIn__M_imag_V_tmp_mem = (imgIn[i_0].imag()).range().to_string(SC_BIN).c_str();
imgIn_M_imag_V_tvin_wrapc_buffer[hls_map_index++].range(15, 0) = imgIn__M_imag_V_tmp_mem.range(15, 0);
}
}
}
}
}
// dump tv to file
for (int i = 0; i < 512; i++)
{
sprintf(tvin_imgIn_M_imag_V, "%s\n", (imgIn_M_imag_V_tvin_wrapc_buffer[i]).to_string(SC_HEX).c_str());
aesl_fh.write(AUTOTB_TVIN_imgIn_M_imag_V, tvin_imgIn_M_imag_V);
}
tcl_file.set_num(512, &tcl_file.imgIn_M_imag_V_depth);
sprintf(tvin_imgIn_M_imag_V, "[[/transaction]] \n");
aesl_fh.write(AUTOTB_TVIN_imgIn_M_imag_V, tvin_imgIn_M_imag_V);
// release memory allocation
delete [] imgIn_M_imag_V_tvin_wrapc_buffer;
// push back input stream: "pyrFilOut"
for (int i = 0; i < aesl_tmp_1; i++)
{
pyrFilOut.write(aesl_tmp_0[i]);
}
// [call_c_dut] ---------->
AESL_ORIG_DUT_pyrconstuct_top(imgIn, pyrFilOut, nL);
// pop output stream: "pyrFilOut"
int aesl_tmp_2 = aesl_tmp_1;
aesl_tmp_1 = 0;
aesl_tmp_0.clear();
while (!pyrFilOut.empty())
{
aesl_tmp_0.push_back(pyrFilOut.read());
aesl_tmp_1++;
}
// [[transaction]]
sprintf(tvout_pyrFilOut_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(AUTOTB_TVOUT_pyrFilOut_V, tvout_pyrFilOut_V);
sc_bv<34>* pyrFilOut_V_tvout_wrapc_buffer = new sc_bv<34>[1520];
// RTL Name: pyrFilOut_V
{
// bitslice(16, 0)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_real.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
// sub : i_0
// ori_name : aesl_tmp_0[i_0].real()
// sub_1st_elem : 0
// ori_name_1st_elem : aesl_tmp_0[0].real()
// regulate_c_name : pyrFilOut_V__M_real_V
// input_type_conversion : (aesl_tmp_0[i_0].real()).range().to_string(SC_BIN).c_str()
if (&(aesl_tmp_0[0].real()) != NULL) // check the null address if the c port is array or others
{
sc_lv<17> pyrFilOut_V__M_real_V_tmp_mem;
pyrFilOut_V__M_real_V_tmp_mem = (aesl_tmp_0[i_0].real()).range().to_string(SC_BIN).c_str();
pyrFilOut_V_tvout_wrapc_buffer[hls_map_index++].range(16, 0) = pyrFilOut_V__M_real_V_tmp_mem.range(16, 0);
}
}
}
}
// bitslice(33, 17)
{
int hls_map_index = 0;
// celement: pyrFilOut.V._M_imag.V(16, 0)
{
// carray: (aesl_tmp_2) => (aesl_tmp_1 - 1) @ (1)
for (int i_0 = aesl_tmp_2; i_0 <= aesl_tmp_1 - 1; i_0 += 1)
{
// sub : i_0
// ori_name : aesl_tmp_0[i_0].imag()
// sub_1st_elem : 0
// ori_name_1st_elem : aesl_tmp_0[0].imag()
// regulate_c_name : pyrFilOut_V__M_imag_V
// input_type_conversion : (aesl_tmp_0[i_0].imag()).range().to_string(SC_BIN).c_str()
if (&(aesl_tmp_0[0].imag()) != NULL) // check the null address if the c port is array or others
{
sc_lv<17> pyrFilOut_V__M_imag_V_tmp_mem;
pyrFilOut_V__M_imag_V_tmp_mem = (aesl_tmp_0[i_0].imag()).range().to_string(SC_BIN).c_str();
pyrFilOut_V_tvout_wrapc_buffer[hls_map_index++].range(33, 17) = pyrFilOut_V__M_imag_V_tmp_mem.range(16, 0);
}
}
}
}
}
// dump tv to file
for (int i = 0; i < aesl_tmp_1 - aesl_tmp_2; i++)
{
sprintf(tvout_pyrFilOut_V, "%s\n", (pyrFilOut_V_tvout_wrapc_buffer[i]).to_string(SC_HEX).c_str());
aesl_fh.write(AUTOTB_TVOUT_pyrFilOut_V, tvout_pyrFilOut_V);
}
tcl_file.set_num(aesl_tmp_1 - aesl_tmp_2, &tcl_file.pyrFilOut_V_depth);
sprintf(tvout_pyrFilOut_V, "[[/transaction]] \n");
aesl_fh.write(AUTOTB_TVOUT_pyrFilOut_V, tvout_pyrFilOut_V);
// release memory allocation
delete [] pyrFilOut_V_tvout_wrapc_buffer;
// dump stream size
sprintf(wrapc_stream_size_out_pyrFilOut_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, wrapc_stream_size_out_pyrFilOut_V);
sprintf(wrapc_stream_size_out_pyrFilOut_V, "%d\n", aesl_tmp_1 - aesl_tmp_2);
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, wrapc_stream_size_out_pyrFilOut_V);
sprintf(wrapc_stream_size_out_pyrFilOut_V, "[[/transaction]] \n");
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_pyrFilOut_V, wrapc_stream_size_out_pyrFilOut_V);
// push back output stream: "pyrFilOut"
for (int i = 0; i < aesl_tmp_1; i++)
{
pyrFilOut.write(aesl_tmp_0[i]);
}
// release memory allocation: "imgIn_M_real_V"
delete [] tvin_imgIn_M_real_V;
// release memory allocation: "imgIn_M_imag_V"
delete [] tvin_imgIn_M_imag_V;
// release memory allocation: "pyrFilOut_V"
delete [] tvout_pyrFilOut_V;
delete [] tvin_pyrFilOut_V;
delete [] wrapc_stream_size_out_pyrFilOut_V;
AESL_transaction++;
tcl_file.set_num(AESL_transaction , &tcl_file.trans_num);
}
}
// For next interface change
//TODO(brugger): remove step_size
//TODO(brugger): path_cnt should be uint64_t
//TODO(brugger): add correlation
void heston_kernel_sl(
// call option
calc_t log_spot_price,
calc_t reversion_rate_TIMES_step_size,
calc_t long_term_avg_vola,
calc_t vol_of_vol_TIMES_sqrt_step_size,
calc_t double_riskless_rate, // = 2 * riskless_rate
calc_t vola_0,
// calc_t correlation,
// calc_t time_to_maturity,
// both knockout
calc_t log_lower_barrier_value,
calc_t log_upper_barrier_value,
// simulation params
uint32_t step_cnt,
calc_t step_size, // = time_to_maturity / step_cnt
calc_t half_step_size, // = step_size / 2
calc_t sqrt_step_size, // = sqrt(step_size)
calc_t barrier_correction_factor, // = BARRIER_HIT_CORRECTION * sqrt_step_size
uint32_t path_cnt,
hls::stream<calc_t> &gaussian_rn1,
hls::stream<calc_t> &gaussian_rn2,
hls::stream<calc_t> &prices)
{
#pragma HLS interface ap_none port=log_spot_price
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=log_spot_price
#pragma HLS interface ap_none port=reversion_rate_TIMES_step_size
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=reversion_rate_TIMES_step_size
#pragma HLS interface ap_none port=long_term_avg_vola
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=long_term_avg_vola
#pragma HLS interface ap_none port=vol_of_vol_TIMES_sqrt_step_size
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=vol_of_vol_TIMES_sqrt_step_size
#pragma HLS interface ap_none port=double_riskless_rate
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=double_riskless_rate
#pragma HLS interface ap_none port=vola_0
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=vola_0
// #pragma HLS interface ap_none port=correlation
// #pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=correlation
// #pragma HLS interface ap_none port=time_to_maturity
// #pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=time_to_maturity
#pragma HLS interface ap_none port=log_lower_barrier_value
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=log_lower_barrier_value
#pragma HLS interface ap_none port=log_upper_barrier_value
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=log_upper_barrier_value
#pragma HLS interface ap_none port=step_cnt
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=step_cnt
#pragma HLS interface ap_none port=step_size
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=step_size
#pragma HLS interface ap_none port=half_step_size
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=half_step_size
#pragma HLS interface ap_none port=sqrt_step_size
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=sqrt_step_size
#pragma HLS interface ap_none port=barrier_correction_factor
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=barrier_correction_factor
#pragma HLS interface ap_none port=path_cnt
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=path_cnt
#pragma HLS interface ap_fifo port=gaussian_rn1
#pragma HLS resource core=AXI4Stream variable=gaussian_rn1
#pragma HLS interface ap_fifo port=gaussian_rn2
#pragma HLS resource core=AXI4Stream variable=gaussian_rn2
#pragma HLS interface ap_fifo port=prices
#pragma HLS resource core=AXI4Stream variable=prices
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" variable=return
////////////////////////////////////////////////////////////////////////////////////////////////////////////
state_t states[BLOCK_SIZE];
#pragma HLS data_pack variable=states
for (uint32_t block = 0; block < path_cnt; block += BLOCK_SIZE) {
for (uint32_t step = 0; step != step_cnt; ++step) {
// TODO(brugger): use data type with less bits for inner counter
for (uint32_t i = 0; i != BLOCK_SIZE; ++i) {
#pragma HLS PIPELINE II=1
state_t l_state;
// initialize
if (step == 0) {
l_state.stock = log_spot_price;
l_state.vola = vola_0;
l_state.barrier_hit = false;
} else {
l_state = states[i];
}
// calcualte next step
state_t n_state;
calc_t max_vola = MAX((calc_t) 0., l_state.vola);
calc_t sqrt_vola = hls::sqrtf(max_vola);
n_state.stock = l_state.stock + (double_riskless_rate - max_vola) *
half_step_size + sqrt_step_size * sqrt_vola *
gaussian_rn1.read();
n_state.vola = l_state.vola + reversion_rate_TIMES_step_size *
(long_term_avg_vola - max_vola) +
vol_of_vol_TIMES_sqrt_step_size * sqrt_vola *
(calc_t) gaussian_rn2.read();
calc_t barrier_correction = barrier_correction_factor *
sqrt_vola;
#pragma HLS RESOURCE variable=barrier_correction \
core=FMul_meddsp
n_state.barrier_hit = l_state.barrier_hit | (n_state.stock <
log_lower_barrier_value + barrier_correction) |
(n_state.stock > log_upper_barrier_value -
barrier_correction);
states[i] = n_state;
// write out
if (step + 1 == step_cnt && (block + i) < path_cnt)
prices.write(n_state.barrier_hit ?
-std::numeric_limits<calc_t>::infinity() :
n_state.stock);
}
}
}
}
void hls_cropping_strm ( hls::stream< ap_int<8> > & src, hls::stream< ap_int<16> > & dst) {
fstream wrapc_switch_file_token;
wrapc_switch_file_token.open(".hls_cosim_wrapc_switch.log");
int AESL_i;
if (wrapc_switch_file_token.good()) {
static unsigned AESL_transaction_pc;
string AESL_token;
string AESL_num;
static AESL_FILE_HANDLER aesl_fh;
aesl_fh.read(WRAPC_STREAM_SIZE_IN_src_V_V, AESL_token); //[[transaction]]
aesl_fh.read(WRAPC_STREAM_SIZE_IN_src_V_V, AESL_num); //transaction number
if (atoi(AESL_num.c_str()) == AESL_transaction_pc ) {
aesl_fh.read(WRAPC_STREAM_SIZE_IN_src_V_V, AESL_token); //pop_size
int aesl_tmp_1 = atoi(AESL_token.c_str());
for (int i = 0 ; i < aesl_tmp_1 ; i++) {
src.read();
}
aesl_fh.read(WRAPC_STREAM_SIZE_IN_src_V_V, AESL_token); //[[/transaction]]
}
int aesl_tmp_4;
int aesl_tmp_5 = 0;
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_dst_V_V, AESL_token); //[[transaction]]
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_dst_V_V, AESL_num); //transaction number
if (atoi(AESL_num.c_str()) == AESL_transaction_pc ) {
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_dst_V_V, AESL_token); //pop_size
aesl_tmp_4 = atoi(AESL_token.c_str());
aesl_fh.read(WRAPC_STREAM_SIZE_OUT_dst_V_V, AESL_token); //[[/transaction]]
}
std::vector<ap_int<16> > aesl_tmp_3;
aesl_fh.read(AUTOTB_TVOUT_PC_dst_V_V, AESL_token); //[[transaction]]
if ( AESL_token != "[[transaction]]") {
exit(1);
}
aesl_fh.read(AUTOTB_TVOUT_PC_dst_V_V, AESL_num); //transaction number
if (atoi(AESL_num.c_str()) == AESL_transaction_pc ) {
aesl_fh.read(AUTOTB_TVOUT_PC_dst_V_V, AESL_token); //data
std::vector < sc_bv<16> > dst_V_V_pc_buffer;
int i = 0;
while (AESL_token != "[[/transaction]]") {
bool no_x = false;
bool err = false;
while (!no_x) {
size_t x_found = AESL_token.find('X');
if (x_found != string::npos) {
if (!err) {
cerr << "@W [SIM-201] RTL produces unknown value 'X' on port 'dst_V_V', possible cause: There are uninitialized variables in the C design." << endl;
err = true;
}
AESL_token.replace(x_found, 1, "0");
} else {
no_x = true;
}
}
no_x = false;
while (!no_x) {
size_t x_found = AESL_token.find('x', 2);
if (x_found != string::npos) {
if (!err) {
cerr << "@W [SIM-201] RTL produces unknown value 'X' on port 'dst_V_V', possible cause: There are uninitialized variables in the C design." << endl;
err = true;
}
AESL_token.replace(x_found, 1, "0");
} else {
no_x = true;
}
}
if (AESL_token != "") {
dst_V_V_pc_buffer.push_back( AESL_token.c_str() );
i++;
}
aesl_fh.read(AUTOTB_TVOUT_PC_dst_V_V, AESL_token); //data or [[/transaction]]
if (AESL_token == "[[[/runtime]]]" || aesl_fh.eof(AUTOTB_TVOUT_PC_dst_V_V)) {
exit(1);
}
}
if (i != aesl_tmp_4) {
aesl_tmp_4 = i;
}
if (aesl_tmp_4 > 0 && aesl_tmp_3.size() < aesl_tmp_4) {
int aesl_tmp_3_size = aesl_tmp_3.size();
for (int tmp_aesl_tmp_3 = 0 ; tmp_aesl_tmp_3 < aesl_tmp_4 - aesl_tmp_3_size ; tmp_aesl_tmp_3 ++ ) {
ap_int<16> tmp;
aesl_tmp_3.push_back(tmp);
}
}
if (i > 0) {
sc_lv<16> *dst_V_V_lv0_0_0_1 = new sc_lv<16>[aesl_tmp_4 - aesl_tmp_5];
AESL_i = 0; //subscript for rtl array
for (int i_0 = 0; i_0 <= aesl_tmp_4 - aesl_tmp_5 - 1 ; i_0+= 1) {
if(&(aesl_tmp_3[0]) != 0) {
dst_V_V_lv0_0_0_1[0 + AESL_i].range(15, 0) = sc_bv<16>(dst_V_V_pc_buffer[0 + AESL_i].range(15, 0));
}
AESL_i++;
}
AESL_i = 0; //subscript for rtl array
for (int i_0 = 0; i_0 <= aesl_tmp_4 - aesl_tmp_5 - 1 ; i_0+= 1) {
if(&(aesl_tmp_3[0]) != 0) {
aesl_tmp_3[i_0] = (dst_V_V_lv0_0_0_1[0 + AESL_i]).to_string(SC_BIN).c_str();
}
AESL_i++;
}
}
}
for (int i = 0; i < aesl_tmp_4; i++) {
dst.write(aesl_tmp_3[i]);
}
AESL_transaction_pc ++ ;
} else {
static unsigned AESL_transaction;
static AESL_FILE_HANDLER aesl_fh;
char* tvin_src_V_V = new char[50];
char* wrapc_stream_size_in_src_V_V = new char[50];
char* tvout_dst_V_V = new char[50];
char* tvin_dst_V_V = new char[50];
aesl_fh.touch(AUTOTB_TVIN_dst_V_V);
char* wrapc_stream_size_out_dst_V_V = new char[50];
static INTER_TCL_FILE tcl_file(INTER_TCL);
int leading_zero;
std::vector<ap_int<8> > aesl_tmp_0;
int aesl_tmp_1 = 0;
while (!src.empty()) {
aesl_tmp_0.push_back(src.read());
aesl_tmp_1 ++;
}
std::vector<ap_int<16> > aesl_tmp_3;
int aesl_tmp_4 = 0;
while (!dst.empty()) {
aesl_tmp_3.push_back(dst.read());
aesl_tmp_4 ++;
}
for (int i = 0; i < aesl_tmp_1; i++) {
src.write(aesl_tmp_0[i]);
}
AESL_ORIG_DUT_hls_cropping_strm(src,dst);
int aesl_tmp_2 = src.size();
int aesl_tmp_5 = aesl_tmp_4;
while (!dst.empty()) {
aesl_tmp_3.push_back(dst.read());
aesl_tmp_4 ++;
}
sprintf(tvin_src_V_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(AUTOTB_TVIN_src_V_V, tvin_src_V_V);
sc_bv<8> *src_V_V_tvin_wrapc_buffer = new sc_bv<8>[aesl_tmp_1 - aesl_tmp_2];
AESL_i = 0; //subscript for rtl array
for (int i_0 = 0; i_0 <= aesl_tmp_1 - aesl_tmp_2 - 1 ; i_0+= 1) {
sc_lv<8> src_V_V_tmp_mem;
if(&(aesl_tmp_0[0]) != 0) {
src_V_V_tmp_mem = (aesl_tmp_0[i_0]).to_string(2).c_str();
src_V_V_tvin_wrapc_buffer[0 + AESL_i].range(7, 0) = src_V_V_tmp_mem.range(7, 0 ) ;
}
AESL_i++;
}
for (int i = 0; i < aesl_tmp_1 - aesl_tmp_2 ; i++) {
sprintf(tvin_src_V_V, "%s\n", (src_V_V_tvin_wrapc_buffer[i]).to_string(SC_HEX).c_str());
aesl_fh.write(AUTOTB_TVIN_src_V_V, tvin_src_V_V);
}
tcl_file.set_num(aesl_tmp_1 - aesl_tmp_2,&tcl_file.src_V_V_depth);
sprintf(tvin_src_V_V, "[[/transaction]] \n");
aesl_fh.write(AUTOTB_TVIN_src_V_V, tvin_src_V_V);
delete [] src_V_V_tvin_wrapc_buffer;
sprintf(wrapc_stream_size_in_src_V_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(WRAPC_STREAM_SIZE_IN_src_V_V, wrapc_stream_size_in_src_V_V);
sprintf(wrapc_stream_size_in_src_V_V, "%d\n", aesl_tmp_1 - aesl_tmp_2);
aesl_fh.write(WRAPC_STREAM_SIZE_IN_src_V_V, wrapc_stream_size_in_src_V_V);
sprintf(wrapc_stream_size_in_src_V_V, "[[/transaction]] \n");
aesl_fh.write(WRAPC_STREAM_SIZE_IN_src_V_V, wrapc_stream_size_in_src_V_V);
sprintf(tvout_dst_V_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(AUTOTB_TVOUT_dst_V_V, tvout_dst_V_V);
sc_bv<16> *dst_V_V_tvout_wrapc_buffer = new sc_bv<16>[aesl_tmp_4 - aesl_tmp_5];
AESL_i = 0; //subscript for rtl array
for (int i_0 = 0; i_0 <= aesl_tmp_4 - aesl_tmp_5 - 1 ; i_0+= 1) {
sc_lv<16> dst_V_V_tmp_mem;
if(&(aesl_tmp_3[0]) != 0) {
dst_V_V_tmp_mem = (aesl_tmp_3[i_0]).to_string(2).c_str();
dst_V_V_tvout_wrapc_buffer[0 + AESL_i].range(15, 0) = dst_V_V_tmp_mem.range(15, 0 ) ;
}
AESL_i++;
}
for (int i = 0; i < aesl_tmp_4 - aesl_tmp_5 ; i++) {
sprintf(tvout_dst_V_V, "%s\n", (dst_V_V_tvout_wrapc_buffer[i]).to_string(SC_HEX).c_str());
aesl_fh.write(AUTOTB_TVOUT_dst_V_V, tvout_dst_V_V);
}
tcl_file.set_num(aesl_tmp_4 - aesl_tmp_5,&tcl_file.dst_V_V_depth);
sprintf(tvout_dst_V_V, "[[/transaction]] \n");
aesl_fh.write(AUTOTB_TVOUT_dst_V_V, tvout_dst_V_V);
delete [] dst_V_V_tvout_wrapc_buffer;
sprintf(wrapc_stream_size_out_dst_V_V, "[[transaction]] %d\n", AESL_transaction);
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_dst_V_V, wrapc_stream_size_out_dst_V_V);
sprintf(wrapc_stream_size_out_dst_V_V, "%d\n", aesl_tmp_4 - aesl_tmp_5);
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_dst_V_V, wrapc_stream_size_out_dst_V_V);
sprintf(wrapc_stream_size_out_dst_V_V, "[[/transaction]] \n");
aesl_fh.write(WRAPC_STREAM_SIZE_OUT_dst_V_V, wrapc_stream_size_out_dst_V_V);
for (int i = 0; i < aesl_tmp_4; i++) {
dst.write(aesl_tmp_3[i]);
}
delete [] tvin_src_V_V;
delete [] wrapc_stream_size_in_src_V_V;
delete [] tvout_dst_V_V;
delete [] tvin_dst_V_V;
delete [] wrapc_stream_size_out_dst_V_V;
AESL_transaction++;
tcl_file.set_num(AESL_transaction , &tcl_file.trans_num);
}
}
void lsupdate1SW ( const uint32_t stepsMC,
const uint32_t pathsMC,
const float K,
const uint32_t callPut,
hls::stream<float> &stock,
hls::stream<float> &b0_in,
hls::stream<float> &b1_in,
hls::stream<float> &b2_in,
hls::stream<float> &contin_out,
hls::stream<float> &payoff_out )
{
printf("lsupdate1SW\n");
printf("lsupdateSW\n");
stepsLoop:for(uint32_t step=0; step<=stepsMC; ++step)
{
// ---------------------------------
// continuation value
float b0;
float b1;
float b2;
if(step == 0)
{
b0 = (float) 0.0f;
b1 = (float) 0.0f;
b2 = (float) 0.0f;
}
else
{
b0 = b0_in.read();
b1 = b1_in.read();
b2 = b2_in.read();
}
// -------------------------------------
pathsLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1 enable_flush
float s = stock.read();
// ---------------------------------
// payoff calculation
float diff = (s-K);
float callPutDiff;
if(callPut == 0)
callPutDiff = diff;
else
callPutDiff = -diff;
float payoff = fmaxf(callPutDiff, (float) 0.0f);
// ---------------------------------
// basis functions
float s2 = s*s;
float x0 = (float) 1.0f;
float x1 = s;
float x2 = s2;
// ---------------------------------
// continuation value
float continuation = b0*x0 + b1*x1 + b2*x2;
// ---------------------------------
// write to output
contin_out.write(continuation);
payoff_out.write(payoff);
}
}
return;
}
void pyrconstuct_top(
cmpxDataIn imgIn[IMG_WIDTH],
//hls::stream<t_image> &imgIn,
hls::stream<t_pyr_complex> &pyrFilOut,
const int nL
) {
#pragma HLS interface ap_fifo depth=512 port=imgIn
#pragma HLS interface ap_fifo depth=1520 port=pyrFilOut
#pragma HLS data_pack variable=pyrFilOut
cmpxDataIn imgInTmp[FFT_LENGTH];
cmpxDataOut imgOutTmpFFTStream[FFT_LENGTH];
cmpxDataOut imgOutTmpBlockRam[FFT_LENGTH];
cmpxDataOut fftPyrOut[1520];
#pragma HLS STREAM variable=imgInTmp depth=512 dim=1
#pragma HLS STREAM variable=imgOutTmpFFTStream depth=512 dim=1
#pragma HLS STREAM variable=fftPyrOut depth=1520 dim=1
LPH: for(int l=0;l<8;l++){
//#pragma HLS DATAFLOW
const int cidx = climits[l];
const int nlimit = limits[l];
const int fsize = fsizes[l];
const int lshift = lshifts[l];
bool direction =false;
bool ovflo;
if( l ==0){
direction = true;
for(int i=0;i<512;i++) {
#pragma HLS pipeline
//cmpxDataIn val (0,0);
//val.real() = imgIn[i].real();
//val.imag() =imgIn[i].real()
imgInTmp[i] = imgIn[i];
}
}
else {
for(int i=0;i<512;i++) {
#pragma HLS pipeline
cmpxDataIn val (0,0);
if (i<nlimit) {
val.real() = (fftPyrOut[cidx + i ].real() >> lshift);
val.imag() = (fftPyrOut[cidx + i ].imag() >> lshift);
}
imgInTmp[i] = val;
}
}
fft_top<config2_t,IMG_WIDTH,cmpxDataIn,cmpxDataOut>(direction,imgIn,imgOutTmpFFTStream,&ovflo,nlimit);
if(l==0){
dummy_proc2(imgOutTmpFFTStream, imgOutTmpBlockRam);
pyrbuild_top(imgOutTmpBlockRam, fftPyrOut, 512, 512);
#ifndef __SYNTHESIS__
{
FILE * fo = fopen("fftOut.txt", "wb");
for(int i=0;i<512;i++) {
fprintf(fo, "%.8f %.8f\n", imgOutTmpFFTStream[i].real().to_float(), imgOutTmpFFTStream[i].imag().to_float());
}
fclose(fo);
}
{
FILE * fo = fopen("fftOutFilter.txt", "wb");
for(int i=0;i<1520;i++) {
fprintf(fo, "%.8f %.8f\n", fftPyrOut[i].real().to_float(), fftPyrOut[i].imag().to_float());
}
}
/*
for(int i=0;i<512;i++)
std::cout << "FFT Out " << i << " : " << imgOutTmp[i] << std::endl;
*/
#endif
}//end of input
else{
for(int i=0;i<512;i++) {
#pragma HLS pipeline
if(i<nlimit){
t_pyr_complex val;
cmpxDataOut2 tmp = imgOutTmpFFTStream[i];
val.real() = tmp.real() >> pshifts[l];
val.imag() = tmp.imag() >> pshifts[l];
pyrFilOut.write(val);
}
}
}
void receive(
hls::stream<t_s_xgmii> &s_xgmii,
hls::stream<t_axis> &m_axis,
hls::stream<t_rx_status> &rx_status
)
{
#ifdef RELEASE
#pragma HLS interface ap_ctrl_none port=return
#pragma HLS data_pack variable=s_xgmii
#endif
#pragma HLS INTERFACE axis port=m_axis
#pragma HLS data_pack variable=rx_status
int i;
t_s_xgmii cur = {0, 0};
t_s_xgmii precur = {0, 0};
t_s_xgmii last_word;
ap_uint<32> crc_state = 0xffffffff;
ap_uint<16> frm_cnt = 0;
int data_err = 0;
ap_uint<16> len_type = 0xffff;
int last_user_byte_lane_before_frame_end;
int user_data_end_detected = 0;
int last_user_word_pos;
ap_uint<3> last_user_byte_lane;
MAIN: while (1) {
if (user_data_end_detected) {
int fcs_err = (crc_state != 0x00000000);
int len_err = 0;
int frm_byte_cnt = frm_cnt*8 + last_user_byte_lane_before_frame_end + 1 + 4;
int under = (frm_byte_cnt < 64);
int over = (frm_byte_cnt > 1500);
if (is_len(len_type)) {
if (len_type > 2) {
len_err = (len_type != ((last_user_word_pos - 2) * 8 + 2 + last_user_byte_lane + 1));
} else {
len_err = (len_type != ((last_user_word_pos - 2) * 8 + 2 + 8 - (last_user_byte_lane + 1)));
}
}
int good = !(fcs_err | len_err | data_err | under | over);
m_axis.write((t_axis){last_word.rxd, mask_up_to_bit(8, last_user_byte_lane), !good, 1});
rx_status.write((t_rx_status) {frm_cnt, good, 0, 0, under, len_err, fcs_err, data_err, 0, over});
}
cur = precur;
if (!s_xgmii.read_nb(precur)) return;
frm_cnt = 0;
crc_state = 0xffffffff;
len_type = 0xffff;
IDLE_AND_PREAMBLE: while (!((cur.rxc == 0x01) && (cur.rxd == 0xd5555555555555fb))) {
#pragma HLS LATENCY max=0 min=0
cur = precur;
if (!s_xgmii.read_nb(precur)) return;
// printf("RXD 0x%016lx, RXC 0x%02x\n", cur.rxd.to_long(), cur.rxc.to_int());
}
cur = precur;
if (!s_xgmii.read_nb(precur)) return;
// printf("RXD 0x%016lx, RXC 0x%02x\n", cur.rxd.to_long(), cur.rxc.to_int());
user_data_end_detected = 0;
int frame_end_detected = 0;
USER_DATA: do {
#pragma HLS LATENCY max=0 min=0
ap_uint<8> crc_field_mask;
// END-OF-FRAME detection
if (cur.rxc != 0x00) {
switch(cur.rxc) {
case 0xe0 : last_user_byte_lane_before_frame_end = 0; crc_field_mask = 0x1e; break;
case 0xc0 : last_user_byte_lane_before_frame_end = 1; crc_field_mask = 0x3c; break;
case 0x80 : last_user_byte_lane_before_frame_end = 2; crc_field_mask = 0x78; break;
default: crc_field_mask = 0xff; break;
}
frame_end_detected = 1;
if (!user_data_end_detected) {
last_word = cur;
last_user_byte_lane = last_user_byte_lane_before_frame_end;
}
user_data_end_detected = 1;
} else if ((precur.rxc != 0x00) && ((ap_uint<8>) ~precur.rxc <= 0x0f)) {
switch(precur.rxc) {
case 0xf0 : last_user_byte_lane_before_frame_end = 7; break;
case 0xf8 : last_user_byte_lane_before_frame_end = 6; crc_field_mask = 0x80; break;
case 0xfc : last_user_byte_lane_before_frame_end = 5; crc_field_mask = 0xc0; break;
case 0xfe : last_user_byte_lane_before_frame_end = 4; crc_field_mask = 0xe0; break;
case 0xff : last_user_byte_lane_before_frame_end = 3; crc_field_mask = 0xf0; frame_end_detected = 1; break;
}
if (!user_data_end_detected) {
last_word = cur;
last_user_byte_lane = last_user_byte_lane_before_frame_end;
}
user_data_end_detected = 1;
} else {
crc_field_mask = 0x00;
}
// END-OF-USER-DATA detection
if (!user_data_end_detected) {
if (frm_cnt == 1) {
len_type = ((ap_uint<16>) wbyte(cur.rxd, 4) << 8) | wbyte(cur.rxd, 5);
if (is_len(len_type)) {
// Calculate the position of the last word within the frame
// which contains valid user data (based on LENGTH/TYPE field
// value. -3 is subtracted before division because first two
// bytes of user data are not word aligned, and 1 is subtracted
// additionally since we want to find out the last word that
// still contains data, not the number of user data words. +2
// since first word aligned user data byte starts at word #2.
last_user_word_pos = (len_type - 3) / 8 + 2;
last_user_byte_lane = (len_type - 3) % 8;
if (len_type <= 2) {
user_data_end_detected = 1;
last_word = cur;
}
}
} else if (is_len(len_type)) {
if (frm_cnt == last_user_word_pos) {
last_word = cur;
user_data_end_detected = 1;
}
}
}
if (!user_data_end_detected) {
m_axis.write((t_axis){cur.rxd, 0xff, 0, 0});
frm_cnt++;
}
ap_uint<64> crc_data = 0;
CRC_MASK_CALC: for (i = 0; i < 8; i++) {
#pragma HLS LOOP unroll
if (!wbit(cur.rxc, i)) {
ap_uint<8> d = wbyte(cur.rxd, i);
if (wbit(crc_field_mask,i)) {
d = ~d;
}
crc_data = replace_byte(crc_data, d, i);
}
}
crc32<ap_uint<64>>(crc_data, &crc_state);
// printf("RXD 0x%016lx, RXC 0x%02x, CRC_DATA 0x%016lx, crc_field_mask 0x%02x, CRC_STATE 0x%08lx, FRMEND %d\n", cur.rxd.to_long(), cur.rxc.to_int(), crc_data.to_long(), crc_field_mask.to_int(), crc_state.to_int(), frame_end_detected);
//// printf("RXD 0x%016lx, RXC 0x%02x, CRC_STATE 0x%08lx, FRMEND %d\n", cur.rxd.to_long(), cur.rxc.to_int(), crc_state.to_int(), frame_end_detected);
cur = precur;
if (!s_xgmii.read_nb(precur)) return;
} while(!frame_end_detected);
}
}
/*
* Core that apply a 3x3(Configurable) 2d Convolution, Erode, Dilate on
* grayscale images
* http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_1/ug902-vivado-high-level-synthesis.pdf
* */
void doImgProc(hls::stream<uint_8_side_channel>& inStream,
hls::stream<int_8_side_channel> & outStream,
char kernel[KERNEL_DIM * KERNEL_DIM],
int operation)
{
#pragma HLS INTERFACE axis port=inStream
#pragma HLS INTERFACE axis port=outStream
#pragma HLS INTERFACE s_axilite port=return bundle=CRTL_BUS
#pragma HLS INTERFACE s_axilite port=operation bundle=CRTL_BUS
#pragma HLS INTERFACE s_axilite port=kernel bundle=KERNEL_BUS
// Defining the line buffer and setting the inter dependency to false through
// pragmas
hls::LineBuffer<KERNEL_DIM, IMG_WIDTH, unsigned char> lineBuff;
hls::Window<KERNEL_DIM, KERNEL_DIM, short> window;
// Index used to keep track of row,col
int idxCol = 0;
int idxRow = 0;
int pixConvolved = 0;
// Calculate delay to fix line-buffer offset
int waitTicks = (IMG_WIDTH * (KERNEL_DIM - 1) + KERNEL_DIM) / 2;// 241;
int countWait = 0;
int sentPixels = 0;
int_8_side_channel dataOutSideChannel;
uint_8_side_channel currPixelSideChannel;
// Iterate on all pixels for our 320x240 image, the HLS PIPELINE improves our
// latency
for (int idxPixel = 0; idxPixel < (IMG_WIDTH * IMG_HEIGHT); idxPixel++) {
#pragma HLS PIPELINE
// Read and cache (Block here if FIFO sender is empty)
currPixelSideChannel = inStream.read();
// Get the pixel data
unsigned char pixelIn = currPixelSideChannel.data;
// Put data on the LineBuffer
lineBuff.shift_up(idxCol);
lineBuff.insert_top(pixelIn, idxCol); // Will put in val[2] of line buffer
// (Check Debug)
// Put data on the window and multiply with the kernel
for (int idxWinRow = 0; idxWinRow < KERNEL_DIM; idxWinRow++) {
for (int idxWinCol = 0; idxWinCol < KERNEL_DIM; idxWinCol++) {
// idxWinCol + pixConvolved, will slide the window ...
short val = (short)lineBuff.getval(idxWinRow, idxWinCol + pixConvolved);
// Multiply kernel by the sampling window
val = (short)kernel[(idxWinRow * KERNEL_DIM) + idxWinCol] * val;
window.insert(val, idxWinRow, idxWinCol);
}
}
// Avoid calculate out of the image boundaries and if we can convolve
short valOutput = 0;
if ((idxRow >= KERNEL_DIM - 1) && (idxCol >= KERNEL_DIM - 1)) {
switch (operation) {
case 0:
// Convolution
valOutput = sumWindow(&window);
valOutput = valOutput / 8;
// Avoid negative values
if (valOutput < 0) valOutput = 0;
break;
case 1:
// Erode
valOutput = minWindow(&window);
break;
case 2:
// Dilate
valOutput = maxWindow(&window);
break;
}
pixConvolved++;
}
// Calculate row and col index
if (idxCol < IMG_WIDTH - 1) {
idxCol++;
}
else {
// New line
idxCol = 0;
idxRow++;
pixConvolved = 0;
}
/*
* Fix the line buffer delay, on a 320x240 image with 3x3 kernel, the delay
* will be
* ((240*2) + 3)/2 = 241
* So we wait for 241 ticks send the results than put more 241 zeros
*/
// Put data on output stream (side-channel(tlast) way...)
/*dataOutSideChannel.data = valOutput;
dataOutSideChannel.keep = currPixelSideChannel.keep;
dataOutSideChannel.strb = currPixelSideChannel.strb;
dataOutSideChannel.user = currPixelSideChannel.user;
dataOutSideChannel.last = currPixelSideChannel.last;
dataOutSideChannel.id = currPixelSideChannel.id;
dataOutSideChannel.dest = currPixelSideChannel.dest;
// Send to the stream (Block if the FIFO receiver is full)
outStream.write(dataOutSideChannel);*/
countWait++;
if (countWait > waitTicks) {
dataOutSideChannel.data = valOutput;
dataOutSideChannel.keep = currPixelSideChannel.keep;
dataOutSideChannel.strb = currPixelSideChannel.strb;
dataOutSideChannel.user = currPixelSideChannel.user;
dataOutSideChannel.last = 0;
dataOutSideChannel.id = currPixelSideChannel.id;
dataOutSideChannel.dest = currPixelSideChannel.dest;
// Send to the stream (Block if the FIFO receiver is full)
outStream.write(dataOutSideChannel);
sentPixels++;
}
}
// Now send the remaining zeros (Just the (Number of delayed ticks)
for (countWait = 0; countWait < waitTicks; countWait++) {
dataOutSideChannel.data = 0;
dataOutSideChannel.keep = currPixelSideChannel.keep;
dataOutSideChannel.strb = currPixelSideChannel.strb;
dataOutSideChannel.user = currPixelSideChannel.user;
// Send last on the last item
if (countWait < waitTicks - 1) dataOutSideChannel.last = 0;
else dataOutSideChannel.last = 1;
dataOutSideChannel.id = currPixelSideChannel.id;
dataOutSideChannel.dest = currPixelSideChannel.dest;
// Send to the stream (Block if the FIFO receiver is full)
outStream.write(dataOutSideChannel);
}
}
void heston_kernel_ml(const params_ml params, hls::stream<calc_t> &gaussian_rn1,
hls::stream<calc_t> &gaussian_rn2, hls::stream<calc_t> &prices) {
#pragma HLS interface ap_none port=params
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" \
variable=params
#pragma HLS interface ap_fifo port=gaussian_rn1
#pragma HLS resource core=AXI4Stream variable=gaussian_rn1
#pragma HLS interface ap_fifo port=gaussian_rn2
#pragma HLS resource core=AXI4Stream variable=gaussian_rn2
#pragma HLS interface ap_fifo port=prices
#pragma HLS resource core=AXI4Stream variable=prices
#pragma HLS resource core=AXI4LiteS metadata="-bus_bundle params" \
variable=return
// write block size to stream
prices.write(BLOCK_SIZE);
state_t state_coarse[BLOCK_SIZE];
#pragma HLS data_pack variable=state_coarse
state_t state_fine[BLOCK_SIZE];
#pragma HLS data_pack variable=state_fine
w_both_t w_both[BLOCK_SIZE];
#pragma HLS data_pack variable=w_both
ap_uint<6> upper_j = params.ml_constant + (params.do_multilevel ? 1 : 0);
for (uint32_t path = 0; path < params.path_cnt; path += BLOCK_SIZE) {
for (uint32_t step = 0; step != params.step_cnt_coarse; ++step) {
for (ap_uint<6> j = 0; j != upper_j; ++j) {
for (ap_uint<10> block_i = 0; block_i != BLOCK_SIZE;
++block_i) {
#pragma HLS PIPELINE II=1
bool is_fine = j != params.ml_constant;
//
// initialize
//
state_t l_state_coarse, l_state_fine;
w_both_t l_w_both;
if (step == 0 && j == 0) {
l_state_coarse = get_init_state(params);
l_state_fine = get_init_state(params);
l_w_both = get_w_zero();
} else {
l_state_coarse = state_coarse[block_i];
l_state_fine = state_fine[block_i];
l_w_both = w_both[block_i];
}
//
// calculate next step
//
state_t n_state_coarse, n_state_fine;
w_both_t n_w_both;
if (is_fine) {
// step fine
float w_stock = gaussian_rn1.read();
float w_vola = gaussian_rn2.read();
n_state_fine = get_next_step(params, l_state_fine,
w_stock, w_vola, true);
n_state_coarse = l_state_coarse;
// accumulate random numbers
n_w_both.w_stock = l_w_both.w_stock + w_stock;
n_w_both.w_vola = l_w_both.w_vola + w_vola;
} else {
// step coarse
n_state_coarse = get_next_step(params, l_state_coarse,
l_w_both.w_stock, l_w_both.w_vola, false);
n_state_fine = l_state_fine;
n_w_both = get_w_zero();
}
state_coarse[block_i] = n_state_coarse;
state_fine[block_i] = n_state_fine;
w_both[block_i] = n_w_both;
//
// write out
//
if ((step + 1 == params.step_cnt_coarse) &&
(j + 1 >= params.ml_constant)) {
if (is_fine) {
prices.write(get_log_price(n_state_fine));
} else {
prices.write(get_log_price(n_state_coarse));
}
}
}
}
}
}
}
// -----------------------------------------------------------
void lsupdate2SWvector ( const uint32_t stepsMC,
const uint32_t pathsMC,
const float discount,
hls::stream<float> &contin_in,
hls::stream<float> &payoff_in,
hls::stream<float> &cashFlowDisc_out,
hls::stream<float> &toAccum_out )
{
printf("lsupdate2SWvector\n");
float cashFlowVector[CASHFLOW_SIZE];
#pragma HLS RESOURCE variable=cashFlowVector core=RAM_2P_BRAM
// ----------------------------------------------------
zerosLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1 enable_flush
cashFlowVector[path] = (float) 0.0f;
}
// ----------------------------------------------------
// ----------------------------------------------------
stepsLoop:for(uint32_t step=0; step<=stepsMC; ++step)
{
pathsLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1 enable_flush
uint32_t indexRead = path;
uint32_t indexWrite = path;
float continuation = contin_in.read();
float payoff = payoff_in.read();
float cashFlow = cashFlowVector[indexRead];
float discountedCashFlow = discount * cashFlow;
// ---------------------------------
float newY;
if( (payoff > (float) 0.0f) && (payoff >= (float) continuation) )
newY = payoff;
else
newY = discountedCashFlow;
// ---------------------------------
// write to outputs
cashFlowVector[indexWrite] = newY;
if(step < stepsMC)
cashFlowDisc_out.write(discount * newY);
if(step == stepsMC)
toAccum_out.write(newY);
}
}
return;
}
void pyrconstuct_top(
cmpxDataIn imgIn[IMG_WIDTH],
//hls::stream<t_image> &imgIn,
hls::stream<t_pyr_complex> &pyrFilOut,
const int nL
) {
//#pragma HLS interface ap_fifo depth=1 port=ovflo
#pragma HLS interface ap_fifo depth=512 port=imgIn
#pragma HLS interface ap_fifo depth=1520 port=pyrFilOut
//#pragma HLS data_pack variable=imgIn
#pragma HLS data_pack variable=pyrFilOut
#pragma HLS dataflow
cmpxDataIn imgInTmp[FFT_LENGTH];
//#pragma HLS RESOURCE variable=imgInTmp core=RAM_2P_BRAM
cmpxDataOut imgOutTmpFFTStream[FFT_LENGTH];
cmpxDataOut imgOutTmpBlockRam[FFT_LENGTH];
cmpxDataOut fftPyrOut[1520];
config_t fft_config;
config2_t fft_config2;
status_t fft_status;
status2_t fft_status2;
#pragma HLS data_pack variable=fft_config
#pragma HLS data_pack variable=fft_config2
#pragma HLS STREAM variable=imgInTmp depth=512 dim=1
#pragma HLS STREAM variable=imgOutTmpFFTStream depth=512 dim=1
//#pragma HLS STREAM variable=fftPyrOut depth=1520 dim=1
fft_config.setDir(true);
//dummy_proc_fe(imgIn, imgInTmp);
for(int i=0;i<512;i++) {
//imgInTmp[i] = imgIn.read();
imgInTmp[i] = imgIn[i];
}
hls::fft<config1>(imgInTmp, imgOutTmpFFTStream, &fft_status, &fft_config);
//imgOutTmp
dummy_proc2(imgOutTmpFFTStream, imgOutTmpBlockRam);
pyrbuild_top(imgOutTmpBlockRam, fftPyrOut, 512, 512);
//return;
#ifndef __SYNTHESIS__
{
FILE * fo = fopen("fftOut.txt", "wb");
for(int i=0;i<512;i++) {
fprintf(fo, "%.8f %.8f\n", imgOutTmpFFTStream[i].real().to_float(), imgOutTmpFFTStream[i].imag().to_float());
}
fclose(fo);
}
{
FILE * fo = fopen("fftOutFilter.txt", "wb");
for(int i=0;i<1520;i++) {
fprintf(fo, "%.8f %.8f\n", fftPyrOut[i].real().to_float(), fftPyrOut[i].imag().to_float());
}
}
/*
for(int i=0;i<512;i++)
std::cout << "FFT Out " << i << " : " << imgOutTmp[i] << std::endl;
*/
#endif
int fsizes[7]={ 512,512,256,128,64,32,16 };
//int l = 0;
LPH: for(int l=0;l<Kset;l++){
cmpxDataOut2 ifftPyrOut2[512];
#pragma HLS STREAM variable=ifftPyrOut2 depth=512 dim=1
#pragma HLS DATAFLOW
//optimized able
cmpxDataOut2 ifftPyrOut[512];
//#pragma HLS RESOURCE variable=ifftPyrOut core=RAM_2P_BRAM
//#pragma HLS ARRAY_PARTITION variable=ifftPyrOut complete dim=1
#pragma HLS STREAM variable=ifftPyrOut depth=512 dim=1
cmpxDataIn imgInTmp2[512];
#pragma HLS STREAM variable=imgInTmp2 depth=512 dim=1
int cidx = climits[l];
int nlimit = limits[l];
int fsize = fsizes[l];
int lshift = lshifts[l];
for(int i=0;i<fsize;i++) {
#pragma HLS pipeline
cmpxDataIn val (0,0);
if (i<nlimit) {
val.real() = (fftPyrOut[cidx + i ].real() >> lshift);
val.imag() = (fftPyrOut[cidx + i ].imag() >> lshift);
}
imgInTmp2[i] = val;
}
fft_config2.setDir(false);
//fft_config2.setSch(0x2AB);
fft_config2.setNfft(llimits[l]);
hls::fft<config2>(imgInTmp2, ifftPyrOut, &fft_status2, &fft_config2);
dummy_proc2<cmpxDataOut2>(ifftPyrOut,ifftPyrOut2);
//#ifndef __SYNTHESIS__
// if (l==0)
// {
// FILE * fo = fopen("ifft_in.txt", "wb");
// for(int i=0;i<512;i++) {
// fprintf(fo, "%.8f %.8f\n", imgInTmp2[i].real().to_float(), imgInTmp2[i].imag().to_float());
// }
// fclose(fo);
//
// fo = fopen("ifft_out.txt", "wb");
// for(int i=0;i<512;i++) {
// fprintf(fo, "%.8f %.8f\n", ifftPyrOut[i].real().to_float(), ifftPyrOut[i].imag().to_float());
// }
// fclose(fo);
// }
//#endif
for(int i=0;i<fsize;i++) {
#pragma HLS pipeline
t_pyr_complex val;
val.real() = ifftPyrOut2[i].real() >> pshifts[l];
val.imag() = ifftPyrOut2[i].imag() >> pshifts[l];
pyrFilOut.write(val);
}
}//end of ifft
void dummy_proc3( T imgIn[IMG_WIDTH],hls::stream<T> &out,int length){
#pragma HLS inline
for(int i=0;i<length;i++)
out.write( imgIn[i]);
}
void accumregio( const uint32_t stepsMC,
const uint32_t pathsMC,
volatile uint32_t *peekStep,
volatile uint32_t *peekPath,
hls::stream<float> &inData,
hls::stream<float> &outAccum )
{
//#pragma HLS INTERFACE s_axilite port=return bundle=CONTROL
//#pragma HLS INTERFACE s_axilite port=stepsMC bundle=CONTROL
//#pragma HLS INTERFACE s_axilite port=pathsMC bundle=CONTROL
//#pragma HLS INTERFACE s_axilite port=peekStep bundle=CONTROL
//#pragma HLS INTERFACE s_axilite port=peekPath bundle=CONTROL
//#pragma HLS INTERFACE axis register port=inData
//#pragma HLS INTERFACE axis register port=outAccum
float sums[ACCUM_ELEM];
#pragma HLS RESOURCE variable=sums core=RAM_2P_BRAM
#pragma HLS DEPENDENCE variable=sums false
*peekStep = 0xFFFFFFFF;
*peekPath = 0xFFFFFFFF;
stepsLoop:for(uint32_t step=0; step<stepsMC; ++step)
{
//#pragma HLS PIPELINE enable_flush
resetLoop:for(uint8_t i=0; i<ACCUM_ELEM; ++i)
{
#pragma HLS PIPELINE II=1
sums[i] = (float) 0.0f;
}
*peekStep = step;
// ------------------------------------------
uint8_t index = (uint8_t) 0;
pathsLoop:for(uint32_t path=0; path<pathsMC; ++path)
{
#pragma HLS PIPELINE II=1
float data = inData.read();
float oldSum = sums[index];
float newSum = oldSum + data;
sums[index] = newSum;
index = (index<(ACCUM_ELEM-1))?++index:(uint8_t)0;
*peekPath = path;
}
// ------------------------------------------
float totalSum = (float) 0.0f;
totalLoop:for(uint8_t i=0; i<ACCUM_ELEM;++i)
{
#pragma HLS PIPELINE II=1
totalSum += sums[i];
}
// ------------------------------------------
outAccum.write(totalSum);
//*peekStep = step;
}
return;
}
void fe_zc(hls::stream< ap_uint<32> > sampleFifo, hls::stream< ap_uint<32> > featureFifo, ap_uint<8> windowSize, ap_uint<32> threshold) {
#pragma HLS INTERFACE ap_ctrl_none port=return
#pragma HLS INTERFACE ap_fifo port=featureFifo
#pragma HLS INTERFACE ap_fifo port=sampleFifo
ap_uint<32> data;
ap_int<16> sampleChannel1 = 0;
ap_int<16> sampleChannel2 = 0;
ap_uint<32> zcChannel1 = 0;
ap_uint<32> zcChannel2 = 0;
ap_int<2> stateChannel1 = 0;
ap_int<2> stateChannel2 = 0;
ap_uint<8> cntSamples = 0;
// Wait for Samples to arrive in FIFO
while( windowSize == 0 ) {
}
while(1) {
zcChannel1 = 0;
zcChannel2 = 0;
stateChannel1 = 0;
stateChannel2 = 0;
// Count zero-crossing for channel 1 & 2
for(cntSamples=0; cntSamples < windowSize; cntSamples++) {
// Read data from Sample-FIFO
// 2 16 bit Samples at one position in 32 bit FIFO => Process 2 channels in parallel
data = sampleFifo.read();
sampleChannel1 = data(15, 0);
if( abs2(sampleChannel1) < threshold ) {
sampleChannel1 = 0;
}
sampleChannel2 = data(31, 16);
if( abs2(sampleChannel2) < threshold ) {
sampleChannel2 = 0;
}
// Check whether a zero-crossing occurred or not
// Channel 1
if( stateChannel1 == 0 ) {
if( sampleChannel1 < 0 ) {
stateChannel1 = -1;
}
else if( sampleChannel1 == 0 ) {
stateChannel1 = 0;
}
else {
stateChannel1 = 1;
}
}
else if( stateChannel1 < 0 ) {
if( sampleChannel1 > 0 ) {
zcChannel1++;
if( sampleChannel1 < 0 ) {
stateChannel1 = -1;
}
else if( sampleChannel1 == 0 ) {
stateChannel1 = 0;
}
else {
stateChannel1 = 1;
}
}
}
else if( stateChannel1 > 0 ) {
if( sampleChannel1 < 0 ) {
zcChannel1++;
if( sampleChannel1 < 0 ) {
stateChannel1 = -1;
}
else if( sampleChannel1 == 0 ) {
stateChannel1 = 0;
}
else {
stateChannel1 = 1;
}
}
}
// Channel 2
if( stateChannel2 == 0 ) {
if( sampleChannel2 < 0 ) {
stateChannel2 = -1;
}
else if( sampleChannel2 == 0 ) {
stateChannel2 = 0;
}
else {
stateChannel2 = 1;
}
}
else if( stateChannel2 < 0 ) {
if( sampleChannel2 > 0 ) {
zcChannel2++;
if( sampleChannel2 < 0 ) {
stateChannel2 = -1;
}
else if( sampleChannel2 == 0 ) {
stateChannel2 = 0;
}
else {
stateChannel2 = 1;
}
}
}
else if( stateChannel2 > 0 ) {
if( sampleChannel2 < 0 ) {
zcChannel2++;
if( sampleChannel2 < 0 ) {
stateChannel2 = -1;
}
else if( sampleChannel2 == 0 ) {
stateChannel2 = 0;
}
else {
stateChannel2 = 1;
}
}
}
}
// Write back features to Feature-FIFO
featureFifo.write(zcChannel1);
featureFifo.write(zcChannel2);
}
}