VMware Lightwave is a software stack geared towards providing identity services including authentication and authorization for large-scale distributed infrastructure, applications and containers.

VMware Lightwave consists of the following primary components.

1. VMware Directory Service (vmdir)

2. VMware Certificate Authority (vmca)

3. VMware Authentication Framework Daemon/Service (vmafd)

4. VMware Secure Token Service (vmware-sts)

Lightwave uses several existing open source packages. These include

1. OpenLDAP

OpenLDAP is used for the LDAP server protocol head and the OpenLDAP Lightning MDB embedded database is used as the underlying LDAP store

1. Heimdal Kerberos

The Heimdal Kerberos stack is used as the Kerberos protocol head.

1. DCE/RPC

DCE/RPC is used as the control infrastructure for configuration of the Lightwave LDAP directory service

1. Likewise Open

The Likewise Open stack is used for its service control infrastructure, its registry infrastructure and its NT Security Descriptor support. Likewise Open also provides a easy mechanism to provide ssh support for Lightwave clients

The first three packages are co-located within the Lightwave project. The Likewise Open project is a separate project and needs to be built from a separate git repository. A binary RPM is also available, please see instructions below to add the repository.

git clone ssh://git@github.com/vmware/lightwave.git

These build instructions are to build Lightwave on VMware's Photon Linux distribution.

1. Clone lightwave git repository onto your Photon (Full) installation.

2. Ensure likewise-open-devel-6.2..x86_64.rpm is installed on your Photon system.

3. Run make* in [workspace root]

4. As part of a successful build, the following RPMs should be created in the [workspace root]/stage folder

   1. vmware-event-devel-6.5.0-0.x86_64.rpm

   2. vmware-directory-client-6.5.0-0.x86_64.rpm

   3. vmware-directory-6.5.0-0.x86_64.rpm

   4. vmware-directory-client-devel-6.5.0-0.x86_64.rpm

   5. vmware-dns-client-6.5.0-0.x86_64.rpm

   6. vmware-dns-6.5.0-0.x86_64.rpm

   7. vmware-dns-client-devel-6.5.0-0.x86_64.rpm

   8. vmware-afd-client-6.5.0-0.x86_64.rpm

   9. vmware-afd-6.5.0-0.x86_64.rpm

   10. vmware-afd-client-devel-6.5.0-0.x86_64.rpm

   11. vmware-ca-6.5.0-0.x86_64.rpm

   12. vmware-ca-client-6.5.0-0.x86_64.rpm

   13. vmware-ca-client-devel-6.5.0-0.x86_64.rpm

   14. vmware-sts-6.5.0-0.x86_64.rpm

   15. vmware-sts-client-6.5.0-0.x86_64.rpm

   16. vmware-ic-config-6.5.0-0.x86_64.rpm

   17. vmware-lightwave-clients-6.5.0-0.x86_64.rpm

   18. vmware-lightwave-server-6.5.0-0.x86_64.rpm

   19. vmware-sts-6.5.0-0.x86_64.rpm

   20. vmware-sts-client-6.5.0-0.x86_64.rpm

A Lightwave platform comprises of Lightwave Domain Controllers and Lightwave Domain Clients.

Pre-built binaries for Lightwave are available through the following YUM repositories that can be configured on your Photon deployment.

After the following YUM repositories have been configured, it should be possible to install the Lightwave Domain Controller and Lightwave Clients using "tdnf install vmware-lightwave-server" and "tdnf install vmware-lightwave-clients" respectively.

Note : After configuring the following YUM repositories, please disable the photon-iso.repo; this is achieved by setting "enabled=0" in /etc/yum.repos.d/photon-iso.repo.

Create the file "/etc/yum.repos.d/lightwave.repo" with the following contents.

[lightwave]
name=VMware Lightwave 1.0(x86_64)
baseurl=https://dl.bintray.com/vmware/lightwave
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
gpgcheck=0
enabled=1
skip_if_unavailable=True

Create the file "/etc/yum.repos.d/photon-extras.repo" with the following contents.

[photon-extras]
name=VMware Photon Extras 1.0(x86_64)
baseurl=https://dl.bintray.com/vmware/photon_extras
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
gpgcheck=0
enabled=1
skip_if_unavailable=True

You must first install the following packages on your Photon instance

1. vmware-directory-client-6.5.0-0.x86_64.rpm

2. vmware-directory-6.5.0-0.x86_64.rpm

3. vmware-dns-client-6.5.0-0.x86_64.rpm

4. vmware-dns-6.5.0-0.x86_64.rpm

5. vmware-afd-client-6.5.2-0.x86_64.rpm

6. vmware-afd-6.5.0-0.x86_64.rpm

7. vmware-ca-client-6.5.0-0.x86_64.rpm

8. vmware-ca-6.5.0-0.x86_64.rpm

9. vmware-ic-config-6.5.0-0.x86_64.rpm

10. vmware-sts-client-6.5.0-0.x86_64.rpm

11. vmware-sts-6.5.0-0.x86_64.rpm

Alternately, you can install the vmware-lightwave-server-6.5.0-0.x86_64.rpm which is a meta RPM with dependencies on all the above RPMs.

If using the YUM repositories for the pre-built binaries, install the Lightwave Domain Controller using "tdnf install vmware-lightwave-server".

/opt/vmware/bin/configure-lightwave-server --password <password>

/opt/vmware/bin/configure-lightwave-server --password <password> \
 --server <hostname or ip-address of partner instance>

Notes:

1. The password specified for the domain administrator must be at least 8 characters, include an upper case letter, a lower case letter, a digit and a special character.

2. Make sure to assign a static ip address or a dhcp-address with a reservation to the system before promoting it to be a domain controller.

The following packages are required to join the Photon system to the Lightwave Domain.

1. vmware-directory-client-6.5.0-0.x86_64.rpm

2. vmware-dns-client-6.5.0-0.x86_64.rpm

3. vmware-afd-client-6.5.0-0.x86_64.rpm

4. vmware-afd-6.5.0-0.x86_64.rpm

5. vmware-ca-client-6.5.0-0.x86_64.rpm

6. vmware-sts-client-6.5.0-0.x86_64.rpm

7. vmware-ic-config-6.5.0-0.x86_64.rpm

Alternately, you can install the vmware-lightwave-clients-6.5.0-0.x86_64.rpm which is a meta RPM with dependencies on all the above RPMs.

If using the YUM repositories for the pre-built binaries, install the Lightwave Domain Client using "tdnf install vmware-lightwave-clients".

/opt/vmware/bin/domainjoin join <domain hostname>