GitHub - MaiChiemMinh/vtStor: This is a library (or set of libraries) to allow easy access and communication to storage devices.

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 207 Commits
Build		Build
Common		Common
Extern		Extern
GenerateFiles		GenerateFiles
StorageUtility		StorageUtility
docs		docs
vtStor.ATest		vtStor.ATest
vtStor.Test		vtStor.Test
vtStor		vtStor
vtStorAta		vtStorAta
vtStorAtaManaged		vtStorAtaManaged
vtStorAtaProtocol		vtStorAtaProtocol
vtStorAtaProtocolManaged		vtStorAtaProtocolManaged
vtStorManaged.ATest		vtStorManaged.ATest
vtStorManaged.Test		vtStorManaged.Test
vtStorManaged		vtStorManaged
vtStorScsi		vtStorScsi
vtStorScsiManaged		vtStorScsiManaged
vtStorScsiProtocol		vtStorScsiProtocol
vtStorScsiProtocolManaged		vtStorScsiProtocolManaged
vtStorUnified		vtStorUnified
.gitignore		.gitignore
Build.py		Build.py
Build_Managed.py		Build_Managed.py
LICENSE		LICENSE
Makefile		Makefile
ManagedCppCommon.props		ManagedCppCommon.props
Readme.txt		Readme.txt
vtStor.sln		vtStor.sln

Repository files navigation

- Build vtStor on Raspbian Jessie:
   + Step 1: Need to expand sd card size because default about 4 GB. reference http://elinux.org/RPi_raspi-config
   + Step 2: install libusb
         o sudo apt-get install libusb-1.0-0-dev
         o sudo apt-get install libudev-dev
	 o export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/include/libudev.h
	 o export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/include/libusb-1.0/libusb.h
   + Step 3: Install GCC 4.9 and compile C++14 programs (default Raspbian Jessie) if not installing, reference https://solarianprogrammer.com/2015/01/13/raspberry-pi-raspbian-install-gcc-compile-cpp-14-programs/
   + Step 4: Get vtStor source code.
   + Step 5: Use TXTerminal to build solution:
               - move the current path into the vtStor-solution path.
	       - command "make all" (finish).
	       
- Run vtStor.ATest:
    + move the current path into the vtStor-solution/Debug path.
    + command "export LD_LIBRARY_PATH=."
    + command "./vtStor.ATest"
          
- Note: 
    + when attaching SSD disk by usb, use command "lsblk" to check number of SSD disk example 2.
    + At main.cpp (vtStor.ATest project): change "line 60: std::shared_ptr<vtStor::IDrive> selectedDrive = drives[0];                         //!!! Warning: be careful with value 0 in drives[1]" 
                   to "line 60: std::shared_ptr<vtStor::IDrive> selectedDrive = drives[2];                         //!!! Warning: be careful with value 0 in drives[1]" 
    + Build again.