TinyGarble is a full implementation of Yao's Garbled Circuit (GC) protocol for
two-party Secure Function Evaluation (SFE) in which the parties are able to
execute any function on their private inputs and learn the output without
leaking any information about their inputs.
The project consists of two main parts: (1) circuit synthesis
(circuit_synthesis) and (2) secure function evaluation.
Circuit synthesis is partially described in TinyGarble paper in IEEE S&P'15 (see
References). It is based on upon hardware synthesis and sequential circuit
concept and outputs a netlist Verilog (.v) file. The other part of TinyGarble,
hereafter called "TinyGarble", is implemented
based on JustGarble
project developed in UCSD. Beside Free-XOR, Row-reduction, OT extension, and
Fixed-key block cipher, TinyGarble includes Half Gates which is the most recent
optimization on GC protocol and reduces the communication by 33%.
TinyGarble also includes communication and Oblivious Transfer (OT) which were
missing in JustGarble. OT is a crucial part for the security of the GC protocol.
TinyGarble general flow:
- Write a Verilog file (
.v) describing the function. - Synthesis the Verilog file using TinyGarble's circuit synthesis to generate
a netlist Verilog file (
.v). - Translate the netlist file (
.v) to a simple circuit description file (.scd) using TinyGarble'sV2SCDand then provide both parties with the file. - Execute
TinyGarbleusing--aliceflag on one party and--bobflag on the other plus other appropriate arguments.
Any questions or comments: Ebrahim Songhori
Install dependencies: g++, OpenSSL (1.0.1f <), boost(1.55.0 <), and cmake (3.1.0 <). on Ubuntu:
- g++:
$ sudo apt-get install g++
- OpenSSL:
$ sudo apt-get install libssl-dev
- boost:
$ sudo apt-get install libboost-all-dev
- cmake:
$ sudo apt-get install software-properties-common
$ sudo add-apt-repository ppa:george-edison55/cmake-3.x
$ sudo apt-get update
$ sudo apt-get upgrade
$ sudo apt-get install cmake
Confing TinyGarble and then compile it in bin directory:
$ ./configure
$ cd bin
$ make
In bin directory call ctest:
$ ctest
V2SCD: Translating netlist Verilog (.v) file to simple circuit description (.scd) file.
-h [ --help ] produce help message.
-i [ --netlist ] arg (=scd/netlists/test.v)
Input netlist (verilog .v) file
address.
-o [ --scd ] arg (=scd/netlists/test.scd)
Output simple circuit description (scd)
file address.
garbled_circuit/TinyGarble: TinyGarble main binary:
-h [ --help ] produce help message
-a [ --alice ] Run as Alice (server).
-b [ --bob ] Run as Bob (client).
-i [ --scd_file ] arg (=../scd/netlists/hamming_32bit_1cc.scd)
Simple circuit description (.scd) file
address.
-p [ --port ] arg (=1234) socket port
-s [ --server_ip ] arg (=127.0.0.1) Server's (Alice's) IP, required when
running as Bob.
--init arg Hexadecimal init for initializing DFFs,
if not provided, it will be random.
--input arg Hexadecimal input, if not provided, it
will be random.
--clock_cycles arg (=1) Number of clock cycles to evaluate the
circuit.
--dump_directory arg Directory for dumping memory hex files.
--disable_OT Disable Oblivious Transfer (OT) for
transferring labels. WARNING: OT is
crucial for GC security.
--output_mask arg (=0) Hexadecimal mask for output. 0
indicates that output belongs to Alice,
and 1 belongs to Bob
--output_mode arg (=0) 0: normal, 1:separated by clock 2:last
clock.
scd/SCD_Evaluator_Main: Evaluating a simple circuit description (.scd) file:
-h [ --help ] produce help message
-i [ --scd_file ] arg (=../scd/netlists/test4.scd)
scd address
--clock_cycles arg (=1) Number of clock cycles to evaluate the
circuit.
--g_init arg (=0) g_init in hexadecimal.
--e_init arg (=0) e_init in hexadecimal.
--g_input arg (=5) g_input in hexadecimal.
--e_input arg (=4) e_input in hexadecimal.
--output_mode arg (=0) 0: normal, 1:separated by clock 2:last
clock.
crypto/OT_Main: Oblivious Transfer binary:
-h [ --help ] produce help message
-a [ --alice ] Run as Alice (server).
--message0 arg (=15141312_11100908_07060504_03020100)
Alice's 128-bit message 0 in
hexadecimal w/o '0x'.
--message1 arg (=00010203_04050607_08091011_12131415)
Alice's 128-bit message 1 in
hexadecimal w/o '0x'.
--select arg (=0) Bob's 1-bit selection (0/1).
-b [ --bob ] Run as Bob (client).
-p [ --port ] arg (=1234) socket port
-s [ --server_ip ] arg (=127.0.0.1) Server's (Alice's) IP, required when
running as Bob.
Util_TestTCPIP_TestBN_TestOT_TestOT_Extension_TestSCD_Evaluator_TestGarbled_Circuit_Test
Netlist generation requires Synopsys Design Compiler or Yosys-ABC synthesis tools.
[This part is mentioned only for documentation and it is already done, please skip.]
Go to circuit_synthesis/lib/dff_full and compile the library:
$ cd circuit_synthesis/lib/dff_full
$ ./compile
Advanced detailed: Let's suppose that our_lib.lib is located in /path/to/our_lib.
- Go inside /path/to/our_lib and run:
$ lc_shell
lc_shell> set search_path [concat /path/to/our_lib/]
lc_shell> read_lib our_lib.lib
lc_shell> write_lib our_lib -format db
lc_shell> exit
[Note: commands starting with "lc_shell>" should be called inside lc_shell.
Please ignore "lc_shell>" for them].
Go inside circuit_synthesis/benchmark, where benchmark is the name of the function
and compile the benchmark to generate the netlist:
$ cd gen_netlist/benchmark
$ ./compile
You can edit benchmark.dcsh file to change synthesis parameters.
Advanced detailed: Let's suppose that our_lib.db is compiled and located
in /path/to/our_lib and benchmark.v is located in /path/to/benchmark/.
- Go to
/path/to/benchmark/and run:
$ design_vision
design_vision> elaborate benchmark -architecture verilog -library DEFAULT -update
design_vision> set_max_area -ignore_tns 0
design_vision> set_flatten false -design *
design_vision> set_structure -design * false
design_vision> set_resource_allocation area_only
design_vision> report_compile_options
design_vision> compile -ungroup_all -boundary_optimization -map_effort high -area_effort high -no_design_rule
design_vision> write -hierarchy -format verilog -output benchmark_syn.v
design_vision> exit
It creates benchmark_syn.v in the current directory. [Note: commands
starting with "design_vision>" should be called inside design_vision.
Please ignore "design_vision>" for them.]
You can use gen_netlist/script/count.sh to count the number of gates in
the generated netlist file. For counting gates in
/path/to/benchmark/benchmark_syn.v, simply run:
$ gen_netlist/script/count.sh /path/to/benchmark/benchmark_syn.v
Here is how to compile a verilog file named "benchmark.v" using the custom library "asic_cell.lib". We assume that the files are inside a folder named "Synthesis_yosys-abc" inside the "yosys" directory. The final output will be written in "benchmark_syn.v"
$ cd ~/yosys
$ ./yosys
yosys> read_verilog Synthesis_yosys-abc/benchmark.v
yosys> hierarchy -check -top benchmark
yosys> proc; opt; memory; opt; fsm; opt; techmap; opt;
yosys> abc -liberty Synthesis_yosys-abc/asic_cell_extended.lib
yosys> opt
yosys> write_verilog Synthesis_yosys-abc/benchmark_syn.v
yosys> exit
[Note: commands starting with "yosys>" should be called inside design_vision. Please ignore "yosys>" for them.]
- Ebrahim M. Songhori, Siam U. Hussain, Ahmad-Reza Sadeghi, Thomas Schneider and Farinaz Koushanfar, "TinyGarble: Highly Compressed and Scalable Sequential Garbled Circuits." Security and Privacy, 2015 IEEE Symposium on May, 2015.
- Mihir Bellare, Viet Tung Hoang, Sriram Keelveedhi, and Phillip Rogaway. Efficient garbling from a fixed-key blockcipher. In S&P, pages 478–492. IEEE, 2013.
- Samee Zahur, Mike Rosulek, and David Evans. "Two halves make a whole: Reducing data transfer in garbled circuits using half gates." In Eurocrypt, 2015.
- G. Asharov, Y. Lindell, T. Schneider and M. Zohner: More Efficient Oblivious Transfer and Extensions for Faster Secure Computation In CCS'13.
- Fix read netlist for Yosys.
- Add synthesis library.