int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
ACPI_STATUS Status;
char *Prefix;
/* Init and command line */
AslInitialize ();
AslCommandLine (argc, argv);
/*
* If -p not specified, we will use the input filename as the
* output filename prefix
*/
FlSplitInputPathname (Gbl_Files[ASL_FILE_INPUT].Filename,
&Gbl_DirectoryPath, &Prefix);
if (Gbl_UseDefaultAmlFilename)
{
Gbl_OutputFilenamePrefix = Prefix;
}
/*
* AML Disassembly (Optional)
*/
if (Gbl_DisasmFlag || Gbl_GetAllTables)
{
/* ACPI CA subsystem initialization */
Status = AcpiOsInitialize ();
AcpiUtInitGlobals ();
Status = AcpiUtMutexInitialize ();
if (ACPI_FAILURE (Status))
{
return -1;
}
Status = AcpiNsRootInitialize ();
if (ACPI_FAILURE (Status))
{
return -1;
}
/* This is where the disassembly happens */
AcpiGbl_DbOpt_disasm = TRUE;
Status = AdAmlDisassemble (AslToFile,
Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_OutputFilenamePrefix,
&Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_GetAllTables);
if (ACPI_FAILURE (Status))
{
return -1;
}
/*
* Gbl_Files[ASL_FILE_INPUT].Filename was replaced with the
* .DSL disassembly file, which can now be compiled if requested
*/
if (DoCompile)
{
AcpiOsPrintf ("\nCompiling \"%s\"\n",
Gbl_Files[ASL_FILE_INPUT].Filename);
}
}
/*
* ASL Compilation (Optional)
*/
if (DoCompile)
{
/*
* If -p not specified, we will use the input filename as the
* output filename prefix
*/
FlSplitInputPathname (Gbl_Files[ASL_FILE_INPUT].Filename,
&Gbl_DirectoryPath, &Prefix);
if (Gbl_UseDefaultAmlFilename)
{
Gbl_OutputFilenamePrefix = Prefix;
}
/* ACPI CA subsystem initialization (Must be re-initialized) */
Status = AcpiOsInitialize ();
AcpiUtInitGlobals ();
Status = AcpiUtMutexInitialize ();
if (ACPI_FAILURE (Status))
{
return -1;
}
Status = AcpiNsRootInitialize ();
if (ACPI_FAILURE (Status))
{
return -1;
}
Status = CmDoCompile ();
}
return (0);
}
ACPI_STATUS
AslDoOneFile (
char *Filename)
{
ACPI_STATUS Status;
Gbl_Files[ASL_FILE_INPUT].Filename = Filename;
/* Re-initialize "some" compiler globals */
AslInitializeGlobals ();
/*
* AML Disassembly (Optional)
*/
if (Gbl_DisasmFlag || Gbl_GetAllTables)
{
/* ACPI CA subsystem initialization */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = AcpiAllocateRootTable (4);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not initialize ACPI Table Manager, %s\n",
AcpiFormatException (Status));
return (Status);
}
/* This is where the disassembly happens */
AcpiGbl_DbOpt_disasm = TRUE;
Status = AdAmlDisassemble (AslToFile,
Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_OutputFilenamePrefix,
&Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_GetAllTables);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Shutdown compiler and ACPICA subsystem */
AeClearErrorLog ();
AcpiTerminate ();
/*
* Gbl_Files[ASL_FILE_INPUT].Filename was replaced with the
* .DSL disassembly file, which can now be compiled if requested
*/
if (Gbl_DoCompile)
{
AcpiOsPrintf ("\nCompiling \"%s\"\n",
Gbl_Files[ASL_FILE_INPUT].Filename);
}
}
/*
* ASL Compilation (Optional)
*/
if (Gbl_DoCompile)
{
/*
* If -p not specified, we will use the input filename as the
* output filename prefix
*/
if (Gbl_UseDefaultAmlFilename)
{
Gbl_OutputFilenamePrefix = Gbl_Files[ASL_FILE_INPUT].Filename;
}
/* ACPI CA subsystem initialization (Must be re-initialized) */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = CmDoCompile ();
AcpiTerminate ();
/*
* Return non-zero exit code if there have been errors, unless the
* global ignore error flag has been set
*/
if ((Gbl_ExceptionCount[ASL_ERROR] > 0) && (!Gbl_IgnoreErrors))
{
return (AE_ERROR);
}
AeClearErrorLog ();
}
return (AE_OK);
}
ACPI_STATUS
AslDoOneFile (
char *Filename)
{
ACPI_STATUS Status;
/* Re-initialize "some" compiler/preprocessor globals */
AslInitializeGlobals ();
PrInitializeGlobals ();
Gbl_Files[ASL_FILE_INPUT].Filename = Filename;
/*
* AML Disassembly (Optional)
*/
if (Gbl_DisasmFlag || Gbl_GetAllTables)
{
/* ACPICA subsystem initialization */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = AcpiAllocateRootTable (4);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not initialize ACPI Table Manager, %s\n",
AcpiFormatException (Status));
return (Status);
}
/* This is where the disassembly happens */
AcpiGbl_DbOpt_disasm = TRUE;
Status = AdAmlDisassemble (AslToFile,
Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_OutputFilenamePrefix,
&Gbl_Files[ASL_FILE_INPUT].Filename,
Gbl_GetAllTables);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Shutdown compiler and ACPICA subsystem */
AeClearErrorLog ();
(void) AcpiTerminate ();
/*
* Gbl_Files[ASL_FILE_INPUT].Filename was replaced with the
* .DSL disassembly file, which can now be compiled if requested
*/
if (Gbl_DoCompile)
{
AcpiOsPrintf ("\nCompiling \"%s\"\n",
Gbl_Files[ASL_FILE_INPUT].Filename);
}
else
{
Gbl_Files[ASL_FILE_INPUT].Filename = NULL;
return (AE_OK);
}
}
/*
* Open the input file. Here, this should be an ASCII source file,
* either an ASL file or a Data Table file
*/
Status = FlOpenInputFile (Gbl_Files[ASL_FILE_INPUT].Filename);
if (ACPI_FAILURE (Status))
{
AePrintErrorLog (ASL_FILE_STDERR);
return (AE_ERROR);
}
/* Determine input file type */
Gbl_FileType = AslDetectSourceFileType (&Gbl_Files[ASL_FILE_INPUT]);
if (Gbl_FileType == ASL_INPUT_TYPE_BINARY)
{
return (AE_ERROR);
}
/*
* If -p not specified, we will use the input filename as the
* output filename prefix
*/
if (Gbl_UseDefaultAmlFilename)
{
Gbl_OutputFilenamePrefix = Gbl_Files[ASL_FILE_INPUT].Filename;
}
/* Open the optional output files (listings, etc.) */
Status = FlOpenMiscOutputFiles (Gbl_OutputFilenamePrefix);
if (ACPI_FAILURE (Status))
{
AePrintErrorLog (ASL_FILE_STDERR);
return (AE_ERROR);
}
/*
* Compilation of ASL source versus DataTable source uses different
* compiler subsystems
*/
switch (Gbl_FileType)
{
/*
* Data Table Compilation
*/
case ASL_INPUT_TYPE_ASCII_DATA:
Status = DtDoCompile ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
if (Gbl_Signature)
{
ACPI_FREE (Gbl_Signature);
Gbl_Signature = NULL;
}
/* Check if any errors occurred during compile */
Status = AslCheckForErrorExit ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Cleanup (for next source file) and exit */
AeClearErrorLog ();
PrTerminatePreprocessor ();
return (Status);
/*
* ASL Compilation
*/
case ASL_INPUT_TYPE_ASCII_ASL:
/* ACPICA subsystem initialization */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
(void) CmDoCompile ();
(void) AcpiTerminate ();
/* Check if any errors occurred during compile */
Status = AslCheckForErrorExit ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Cleanup (for next source file) and exit */
AeClearErrorLog ();
PrTerminatePreprocessor ();
return (AE_OK);
case ASL_INPUT_TYPE_BINARY:
AePrintErrorLog (ASL_FILE_STDERR);
return (AE_ERROR);
default:
printf ("Unknown file type %X\n", Gbl_FileType);
return (AE_ERROR);
}
}
static ACPI_STATUS
AslDoDisassembly (
void)
{
ACPI_STATUS Status;
/* ACPICA subsystem initialization */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = AcpiAllocateRootTable (4);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not initialize ACPI Table Manager, %s\n",
AcpiFormatException (Status));
return (Status);
}
/* Handle additional output files for disassembler */
AslGbl_FileType = ASL_INPUT_TYPE_BINARY_ACPI_TABLE;
Status = FlOpenMiscOutputFiles (AslGbl_OutputFilenamePrefix);
/* This is where the disassembly happens */
AcpiGbl_DmOpt_Disasm = TRUE;
Status = AdAmlDisassemble (AslToFile,
AslGbl_Files[ASL_FILE_INPUT].Filename, AslGbl_OutputFilenamePrefix,
&AslGbl_Files[ASL_FILE_INPUT].Filename);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Check if any control methods were unresolved */
AcpiDmUnresolvedWarning (0);
/* Shutdown compiler and ACPICA subsystem */
AeClearErrorLog ();
(void) AcpiTerminate ();
/*
* AslGbl_Files[ASL_FILE_INPUT].Filename was replaced with the
* .DSL disassembly file, which can now be compiled if requested
*/
if (AslGbl_DoCompile)
{
AcpiOsPrintf ("\nCompiling \"%s\"\n",
AslGbl_Files[ASL_FILE_INPUT].Filename);
return (AE_CTRL_CONTINUE);
}
/* No need to free the filename string */
AslGbl_Files[ASL_FILE_INPUT].Filename = NULL;
UtDeleteLocalCaches ();
return (AE_OK);
}
static ACPI_STATUS
AslDoDisassembly (
void)
{
ACPI_STATUS Status;
/* ACPICA subsystem initialization */
Status = AdInitialize ();
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = AcpiAllocateRootTable (4);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not initialize ACPI Table Manager, %s\n",
AcpiFormatException (Status));
return (Status);
}
/* This is where the disassembly happens */
AcpiGbl_DbOpt_disasm = TRUE;
Status = AdAmlDisassemble (AslToFile,
Gbl_Files[ASL_FILE_INPUT].Filename, Gbl_OutputFilenamePrefix,
&Gbl_Files[ASL_FILE_INPUT].Filename);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Check if any control methods were unresolved */
AcpiDmUnresolvedWarning (0);
#if 0
/* TBD: Handle additional output files for disassembler */
Status = FlOpenMiscOutputFiles (Gbl_OutputFilenamePrefix);
NsDisplayNamespace ();
#endif
/* Shutdown compiler and ACPICA subsystem */
AeClearErrorLog ();
(void) AcpiTerminate ();
/*
* Gbl_Files[ASL_FILE_INPUT].Filename was replaced with the
* .DSL disassembly file, which can now be compiled if requested
*/
if (Gbl_DoCompile)
{
AcpiOsPrintf ("\nCompiling \"%s\"\n",
Gbl_Files[ASL_FILE_INPUT].Filename);
return (AE_CTRL_CONTINUE);
}
ACPI_FREE (Gbl_Files[ASL_FILE_INPUT].Filename);
Gbl_Files[ASL_FILE_INPUT].Filename = NULL;
return (AE_OK);
}
