{
machine().scheduler().timer_set(attotime::from_usec(10), FUNC(okean240_boot));
memory_set_bank(machine(), "boot", 1);
m_term_data = 0;
m_j = 0;
m_scroll = 0;
}
WRITE8_MEMBER( okean240_state::kbd_put )
{
m_term_data = data;
}
static GENERIC_TERMINAL_INTERFACE( okean240_terminal_intf )
{
DEVCB_DRIVER_MEMBER(okean240_state, kbd_put)
};
DRIVER_INIT( okean240 )
{
UINT8 *RAM = machine.region("maincpu")->base();
memory_configure_bank(machine, "boot", 0, 2, &RAM[0x0000], 0xe000);
}
VIDEO_START_MEMBER( okean240_state )
{
}
#ifndef OKEAN240_USING_TESTROM
static SCREEN_UPDATE( okean240 )
{
WRITE8_MEMBER(toypop_state::out_coin1)
{
coin_counter_w(machine(), 1, ~data & 1);
}
WRITE8_MEMBER(toypop_state::flip)
{
flip_screen_set(data & 1);
}
/* chip #0: player inputs, buttons, coins */
static const namcoio_interface intf0_coin =
{
{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1_RIGHT"), DEVCB_INPUT_PORT("P2_RIGHT"), DEVCB_INPUT_PORT("BUTTONS") }, /* port read handlers */
{ DEVCB_DRIVER_MEMBER(toypop_state,out_coin0), DEVCB_DRIVER_MEMBER(toypop_state,out_coin1) }, /* port write handlers */
NULL /* device */
};
static const namcoio_interface intf0 =
{
{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1_RIGHT"), DEVCB_INPUT_PORT("P2_RIGHT"), DEVCB_INPUT_PORT("BUTTONS") }, /* port read handlers */
{ DEVCB_NULL, DEVCB_NULL }, /* port write handlers */
NULL /* device */
};
/* chip #1: dip switches */
static const namcoio_interface intf1 =
{
{ DEVCB_DRIVER_MEMBER(toypop_state,dipA_h), DEVCB_DRIVER_MEMBER(toypop_state,dipB_l), DEVCB_DRIVER_MEMBER(toypop_state,dipB_h), DEVCB_DRIVER_MEMBER(toypop_state,dipA_l) }, /* port read handlers */
{ DEVCB_DRIVER_MEMBER(toypop_state,flip), DEVCB_NULL }, /* port write handlers */
NULL /* device */
AM_RANGE(0x00, 0x00) AM_READ(term_r) AM_DEVWRITE(TERMINAL_TAG, generic_terminal_device, write)
AM_RANGE(0x01, 0x01) AM_READ(term_status_r)
ADDRESS_MAP_END
/* Input ports */
static INPUT_PORTS_START( cm1800 )
INPUT_PORTS_END
static MACHINE_RESET(cm1800)
{
}
static GENERIC_TERMINAL_INTERFACE( terminal_intf )
{
DEVCB_DRIVER_MEMBER(cm1800_state, kbd_put)
};
static MACHINE_CONFIG_START( cm1800, cm1800_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu",I8080, XTAL_2MHz)
MCFG_CPU_PROGRAM_MAP(cm1800_mem)
MCFG_CPU_IO_MAP(cm1800_io)
MCFG_MACHINE_RESET(cm1800)
/* video hardware */
MCFG_GENERIC_TERMINAL_ADD(TERMINAL_TAG, terminal_intf)
MACHINE_CONFIG_END
/* ROM definition */
PA6 SP0256 _ALD
PA7
*/
if (!BIT(data, 6))
{
m_sp0256->ald_w(space, 0, data & 0x3f);
}
}
static I8255A_INTERFACE( ppi_intf )
{
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(ace_state,sby_r),
DEVCB_DRIVER_MEMBER(ace_state,ald_w),
DEVCB_NULL,
DEVCB_NULL
};
//-------------------------------------------------
// Z80PIO_INTERFACE( pio_intf )
//-------------------------------------------------
READ8_MEMBER( ace_state::pio_pa_r )
{
/*
bit description
m_crtc->dack_w(space, 0, data);
}
else
{
return prog_space.write_byte(offset, data);
}
}
// busack on cpu connects to bai pin
static Z80DMA_INTERFACE( dma_intf )
{
//DEVCB_CPU_INPUT_LINE("maincpu", INPUT_LINE_HALT), //busreq - connects to busreq on cpu
DEVCB_DRIVER_LINE_MEMBER(zorba_state, busreq_w), //busreq - connects to busreq on cpu
DEVCB_CPU_INPUT_LINE("maincpu", INPUT_LINE_IRQ0), //int/pulse - connects to IRQ0 on cpu
DEVCB_NULL, //ba0 - not connected
DEVCB_DRIVER_MEMBER(zorba_state, memory_read_byte),
DEVCB_DRIVER_MEMBER(zorba_state, memory_write_byte),
DEVCB_DRIVER_MEMBER(zorba_state, io_read_byte),
DEVCB_DRIVER_MEMBER(zorba_state, io_write_byte),
};
static SLOT_INTERFACE_START( zorba_floppies )
SLOT_INTERFACE( "525dd", FLOPPY_525_DD )
SLOT_INTERFACE_END
// COM port
static const i8251_interface u0_intf =
{
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
WRITE_LINE_MEMBER(tail2nos_state::irqhandler)
{
m_audiocpu->set_input_line(0, state ? ASSERT_LINE : CLEAR_LINE);
}
static const ay8910_interface ay8910_config =
{
AY8910_LEGACY_OUTPUT | AY8910_SINGLE_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(tail2nos_state,sound_bankswitch_w)
};
static const k051316_interface tail2nos_k051316_intf =
{
"gfx3", 2,
-4, TRUE, 0,
1, -89, -14,
tail2nos_zoom_callback
};
void tail2nos_state::machine_start()
{
UINT8 *ROM = memregion("audiocpu")->base();
bit 6 - Player 2 steering input (wheel moving or stopped)
bit 7 - Player 1 steering input (wheel moving or stopped) */
ret = (m_ttl7474_1a_1->output_r() ? 0x10 : 0x00) |
(m_ttl7474_1c_1->output_r() ? 0x20 : 0x00) |
(m_ttl7474_1d_1->output_r() ? 0x40 : 0x00) |
(m_ttl7474_1f_1->output_r() ? 0x80 : 0x00);
return ret;
}
const pia6821_interface carpolo_pia0_intf =
{
DEVCB_NULL, /* port A in */
DEVCB_DRIVER_MEMBER(carpolo_state,pia_0_port_b_r), /* port B in */
DEVCB_NULL, /* line CA1 in */
DEVCB_NULL, /* line CB1 in */
DEVCB_NULL, /* line CA2 in */
DEVCB_NULL, /* line CB2 in */
DEVCB_DRIVER_MEMBER(carpolo_state,pia_0_port_a_w), /* port A out */
DEVCB_DRIVER_MEMBER(carpolo_state,pia_0_port_b_w), /* port B out */
DEVCB_DRIVER_LINE_MEMBER(carpolo_state,coin1_interrupt_clear_w), /* line CA2 out */
DEVCB_DRIVER_LINE_MEMBER(carpolo_state,coin2_interrupt_clear_w), /* port CB2 out */
DEVCB_NULL, /* IRQA */
DEVCB_NULL /* IRQB */
};
const pia6821_interface carpolo_pia1_intf =
{
WRITE_LINE_MEMBER( apf_state::apf_m1000_irq_a_func )
{
apf_update_ints(0x01);
}
WRITE_LINE_MEMBER( apf_state::apf_m1000_irq_b_func )
{
//logerror("pia 0 irq b %d\n",state);
apf_update_ints(0x02);
}
static const pia6821_interface apf_m1000_pia_interface=
{
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_a_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_b_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_ca1_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_cb1_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_ca2_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_in_cb2_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_out_a_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_out_b_func),
DEVCB_DRIVER_LINE_MEMBER(apf_state, apf_m1000_pia_out_ca2_func),
DEVCB_DRIVER_MEMBER(apf_state, apf_m1000_pia_out_cb2_func),
DEVCB_DRIVER_LINE_MEMBER(apf_state, apf_m1000_irq_a_func),
DEVCB_DRIVER_LINE_MEMBER(apf_state, apf_m1000_irq_b_func)
};
READ8_MEMBER( apf_state::apf_imagination_pia_in_a_func)
/* Centronics Strobe */
m_centronics->strobe_w(BIT(data, 5));
/* FDC Reset */
if (BIT(data, 6))
compis_fdc_reset(machine());
/* FDC Terminal count */
compis_fdc_tc(BIT(data, 7));
}
I8255A_INTERFACE( compis_ppi_interface )
{
DEVCB_NULL,
DEVCB_DEVICE_MEMBER("centronics", centronics_device, write),
DEVCB_DRIVER_MEMBER(compis_state, compis_ppi_port_b_r),
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(compis_state, compis_ppi_port_c_w)
};
/*-------------------------------------------------------------------------*/
/* PIT 8253 */
/*-------------------------------------------------------------------------*/
const struct pit8253_config compis_pit8253_config =
{
{
/* Timer0 */
{4770000/4, DEVCB_NULL, DEVCB_NULL },
*p++ = BIT(gfx, 0);
}
}
ma+=80;
}
return 0;
}
WRITE8_MEMBER( k8915_state::kbd_put )
{
m_term_data = data;
}
static ASCII_KEYBOARD_INTERFACE( keyboard_intf )
{
DEVCB_DRIVER_MEMBER(k8915_state, kbd_put)
};
static MACHINE_CONFIG_START( k8915, k8915_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", Z80, XTAL_16MHz / 4)
MCFG_CPU_PROGRAM_MAP(k8915_mem)
MCFG_CPU_IO_MAP(k8915_io)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_REFRESH_RATE(60)
MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500)) /* not accurate */
MCFG_SCREEN_UPDATE_DRIVER(k8915_state, screen_update)
MCFG_SCREEN_SIZE(640, 250)
MCFG_SCREEN_VISIBLE_AREA(0, 639, 0, 249)
memcpy((UINT8*)m_p_ram.target(),user1,0x4000);
m_maincpu->reset();
m_term_data = 0;
}
WRITE8_MEMBER( sun1_state::kbd_put )
{
m_term_data = data;
}
static GENERIC_TERMINAL_INTERFACE( terminal_intf )
{
DEVCB_DRIVER_MEMBER(sun1_state, kbd_put)
};
static MACHINE_CONFIG_START( sun1, sun1_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz)
MCFG_CPU_PROGRAM_MAP(sun1_mem)
/* video hardware */
MCFG_GENERIC_TERMINAL_ADD(TERMINAL_TAG, terminal_intf)
MACHINE_CONFIG_END
/* ROM definition */
ROM_START( sun1 )
ROM_REGION( 0x4000, "user1", ROMREGION_ERASEFF )
static const ay8910_interface ay8910_intf =
{
/*
AY8910: Port A out: FF
AY8910: Port B out: FF
AY8910: Port A out: FF
AY8910: Port B out: FF
AY8910: Port A out: 00
AY8910: Port B out: 00
*/
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_NULL, /* Seems unused */
DEVCB_NULL, /* Seems unused */
DEVCB_DRIVER_MEMBER(tonton_state,ay_aout_w), /* Write all bits twice, and then reset them at boot */
DEVCB_DRIVER_MEMBER(tonton_state,ay_bout_w) /* Write all bits twice, and then reset them at boot */
};
/*************************************************
* Machine Driver *
*************************************************/
static MACHINE_CONFIG_START( tonton, tonton_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu",Z80, CPU_CLOCK) /* Guess. According to other MSX2 based gambling games */
MCFG_CPU_PROGRAM_MAP(tonton_map)
MCFG_CPU_IO_MAP(tonton_io)
MCFG_TIMER_DRIVER_ADD_SCANLINE("scantimer", tonton_state, tonton_interrupt, "screen", 0, 1)
NULL
};
static const cassette_interface alice32_cassette_interface =
{
alice32_cassette_formats,
NULL,
(cassette_state)(CASSETTE_STOPPED | CASSETTE_SPEAKER_ENABLED | CASSETTE_MOTOR_ENABLED),
"alice32_cass",
NULL
};
static const mc6847_interface mc10_mc6847_intf =
{
"screen",
DEVCB_DRIVER_MEMBER(mc10_state, mc10_mc6847_videoram_r)
};
static MACHINE_CONFIG_START( mc10, mc10_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M6803, XTAL_3_579545MHz) /* 0,894886 MHz */
MCFG_CPU_PROGRAM_MAP(mc10_mem)
MCFG_CPU_IO_MAP(mc10_io)
/* video hardware */
MCFG_SCREEN_MC6847_NTSC_ADD("screen", "mc6847")
MCFG_MC6847_ADD("mc6847", MC6847_NTSC, XTAL_3_579545MHz, mc10_mc6847_intf)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
switch (offset & 0x0c)
{
case 0x04: /* Motherboard */
switch (offset & 0x80)
{
case 0x80: /* Motherboard 8255 */
return machine().device<i8255_device>("ppi8255_0")->write(space, offset & 0x03, data);
}
break;
}
}
const i8255_interface pmd85_ppi8255_interface[4] =
{
{
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_porta_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_porta_w),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_portb_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_portb_w),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_portc_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_0_portc_w)
},
{
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_porta_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_porta_w),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_portb_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_portb_w),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_portc_r),
DEVCB_DRIVER_MEMBER(pmd85_state,pmd85_ppi_1_portc_w)
},
{
void seattle_comp_state::machine_reset()
{
m_key_available = 0;
m_term_data = 0;
}
WRITE8_MEMBER( seattle_comp_state::kbd_put )
{
m_term_data = data;
m_key_available = 1;
}
static GENERIC_TERMINAL_INTERFACE( terminal_intf )
{
DEVCB_DRIVER_MEMBER(seattle_comp_state, kbd_put)
};
static MACHINE_CONFIG_START( seattle, seattle_comp_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", I8086, 4000000) // no idea
MCFG_CPU_PROGRAM_MAP(seattle_mem)
MCFG_CPU_IO_MAP(seattle_io)
/* video hardware */
MCFG_GENERIC_TERMINAL_ADD(TERMINAL_TAG, terminal_intf)
MACHINE_CONFIG_END
/* ROM definition */
ROM_START( seattle )
ROM_REGION( 0x800, "user1", 0 )
// i8237_hlda_w(get_device_dma8237_2(device), state);
}
WRITE_LINE_MEMBER(apollo_state::apollo_dma_2_hrq_changed ) {
CLOG2(("dma 2 hrq changed state %02x", state));
m_maincpu->set_input_line(INPUT_LINE_HALT, state ? ASSERT_LINE : CLEAR_LINE);
/* Assert HLDA */
m_dma8237_2->hack_w(state);
}
static I8237_INTERFACE( apollo_dma8237_1_config )
{
DEVCB_DRIVER_LINE_MEMBER(apollo_state, apollo_dma_1_hrq_changed),
DEVCB_DRIVER_LINE_MEMBER(apollo_state, apollo_dma8237_out_eop),
DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma_read_byte),
DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma_write_byte),
{ DEVCB_NULL, DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_ctape_dack_r), DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_fdc_dack_r), DEVCB_NULL},
{ DEVCB_NULL, DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_ctape_dack_w), DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_fdc_dack_w), DEVCB_NULL},
{ DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_NULL}
};
static I8237_INTERFACE( apollo_dma8237_2_config )
{
DEVCB_DRIVER_LINE_MEMBER(apollo_state, apollo_dma_2_hrq_changed),
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma_read_word),
DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma_write_word),
{ DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_wdc_dack_r)},
{ DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_DRIVER_MEMBER(apollo_state, apollo_dma8237_wdc_dack_w)},
{ DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_NULL}
{
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_INPUT_PORT("DSWA"), // DSW A
DEVCB_INPUT_PORT("DSWB"), // DSW B
DEVCB_NULL,
DEVCB_NULL
};
static const ay8910_interface ay8910_interface_2 =
{
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(chaknpop_state,unknown_port_1_w), // ??
DEVCB_DRIVER_MEMBER(chaknpop_state,unknown_port_2_w) // ??
};
/***************************************************************************
Input Port(s)
***************************************************************************/
static INPUT_PORTS_START( chaknpop )
PORT_START("SYSTEM")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN1 ) // LEFT COIN
There's a separate ROM check for banked U04 at 30F3.
It looks like dealer/revenger uses ppi8255 to control bankswitching.
*/
WRITE8_MEMBER(epos_state::write_prtc)
{
membank("bank2")->set_entry(data & 0x01);
}
static I8255A_INTERFACE( ppi8255_intf )
{
DEVCB_INPUT_PORT("INPUTS"), /* Port A read */
DEVCB_NULL, /* Port A write */
DEVCB_NULL, /* Port B read */
DEVCB_NULL, /* Port B write */
DEVCB_NULL, /* Port C read */
DEVCB_DRIVER_MEMBER(epos_state,write_prtc) /* Port C write */
};
/*************************************
*
* Port definitions
*
*************************************/
/* I think the upper two bits of port 1 are used as a simple form of protection,
so that ROMs couldn't be simply swapped. Each game checks these bits and halts
the processor if an unexpected value is read. */
static INPUT_PORTS_START( megadon )
PORT_START("DSW")
/*****************************************************************************/
static TMS9928A_INTERFACE(ti99_4_tms9928a_interface)
{
SCREEN_TAG,
0x4000,
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, set_tms9901_INT2)
};
/* TMS9901 setup. */
const tms9901_interface tms9901_wiring_ti99_4 =
{
TMS9901_INT1 | TMS9901_INT2 | TMS9901_INTC, /* only input pins whose state is always known */
// read handler
DEVCB_DRIVER_MEMBER(ti99_4x_state, read_by_9901),
// write handlers
{
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, handset_ack),
DEVCB_NULL,
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, keyC0),
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, keyC1),
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, keyC2),
DEVCB_NULL,
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, cs1_motor),
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, cs2_motor),
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, audio_gate),
DEVCB_DRIVER_LINE_MEMBER(ti99_4x_state, cassette_output),
DEVCB_NULL,
DEVCB_NULL,
WRITE8_MEMBER( fidelz80_state::vcc_porta_w )
{
m_speech->set_volume(15); // hack, s14001a core should assume a volume of 15 unless otherwise stated...
m_speech->reg_w(data & 0x3f);
m_speech->rst_w(BIT(data, 7));
m_digit_data = data;
update_display();
}
static I8255_INTERFACE( cc10_ppi8255_intf )
{
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(fidelz80_state, cc10_porta_w),
DEVCB_INPUT_PORT("LEVEL"),
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portb_w),
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portc_r),
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portc_w)
};
static I8255_INTERFACE( vcc_ppi8255_intf )
{
DEVCB_NULL, // only bit 6 is readable (and only sometimes) and I'm not emulating the language latch unless needed
DEVCB_DRIVER_MEMBER(fidelz80_state, vcc_porta_w), // display segments and s14001a lines
DEVCB_DRIVER_MEMBER(fidelz80_state, vcc_portb_r), // bit 7 is readable and is the done line from the s14001a
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portb_w), // display digits and led dots
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portc_r), // bits 0,1,2,3 are readable, have to do with input
DEVCB_DRIVER_MEMBER(fidelz80_state, fidelz80_portc_w), // bits 4,5,6,7 are writable, have to do with input
};
m_audiocpu->set_input_line(INPUT_LINE_NMI, PULSE_LINE);
m_pending_nmi = 0;
}
}
WRITE8_MEMBER(ladyfrog_state::unk_w)
{
}
static const ay8910_interface ay8910_config =
{
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(ladyfrog_state,unk_w),
DEVCB_DRIVER_MEMBER(ladyfrog_state,unk_w)
};
static const msm5232_interface msm5232_config =
{
{ 0.65e-6, 0.65e-6, 0.65e-6, 0.65e-6, 0.65e-6, 0.65e-6, 0.65e-6, 0.65e-6 },
DEVCB_NULL
};
READ8_MEMBER(ladyfrog_state::snd_flag_r)
{
return m_snd_flag | 0xfd;
}
static ADDRESS_MAP_START( ladyfrog_map, AS_PROGRAM, 8, ladyfrog_state )
MACHINE_RESET_MEMBER(pdp11_state,pdp11qb)
{
m_maincpu->set_state_int(T11_PC, 0xea00);
}
WRITE8_MEMBER( pdp11_state::kbd_put )
{
m_teletype_data = data;
m_teletype_status |= 0x80;
}
static GENERIC_TERMINAL_INTERFACE( terminal_intf )
{
DEVCB_DRIVER_MEMBER(pdp11_state, kbd_put)
};
static MACHINE_CONFIG_START( pdp11, pdp11_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu",T11, XTAL_4MHz) // Need proper CPU here
MCFG_T11_INITIAL_MODE(6 << 13)
MCFG_CPU_PROGRAM_MAP(pdp11_mem)
/* video hardware */
MCFG_GENERIC_TERMINAL_ADD(TERMINAL_TAG, terminal_intf)
MCFG_RX01_ADD("rx01")
MACHINE_CONFIG_END
SLOT_INTERFACE("m034", KC_M034) // 512KB segmented RAM
SLOT_INTERFACE("m035", KC_M035) // 1MB segmented RAM
SLOT_INTERFACE("m036", KC_M036) // 128KB segmented RAM
SLOT_INTERFACE_END
extern SLOT_INTERFACE_START(kc85_exp)
SLOT_INTERFACE("d002", KC_D002) // D002 Bus Driver
SLOT_INTERFACE("d004", KC_D004) // D004 Floppy Disk Interface
SLOT_INTERFACE("d004gide", KC_D004_GIDE) // D004 Floppy Disk + GIDE Interface
SLOT_INTERFACE_END
Z80PIO_INTERFACE( kc85_pio_intf )
{
DEVCB_CPU_INPUT_LINE("maincpu", 0), /* callback when change interrupt status */
DEVCB_DRIVER_MEMBER(kc_state, pio_porta_r), /* port A read callback */
DEVCB_DRIVER_MEMBER(kc_state, pio_porta_w), /* port A write callback */
DEVCB_DRIVER_LINE_MEMBER(kc_state, pio_ardy_cb), /* portA ready active callback */
DEVCB_DRIVER_MEMBER(kc_state, pio_portb_r), /* port B read callback */
DEVCB_DRIVER_MEMBER(kc_state, pio_portb_w), /* port B write callback */
DEVCB_DRIVER_LINE_MEMBER(kc_state, pio_brdy_cb) /* portB ready active callback */
};
Z80CTC_INTERFACE( kc85_ctc_intf )
{
DEVCB_CPU_INPUT_LINE("maincpu", 0),
DEVCB_DRIVER_LINE_MEMBER(kc_state, ctc_zc0_callback),
DEVCB_DRIVER_LINE_MEMBER(kc_state, ctc_zc1_callback),
DEVCB_DRIVER_LINE_MEMBER(kc_state, video_toggle_blink_state)
};
output_set_lamp_value(8, (data >> 1) & 1); /* hold1 lamp */
}
/*************************
* Machine Init *
*************************/
static I8255A_INTERFACE( ppi8255_intf )
{
DEVCB_INPUT_PORT("IN0"), /* Port A read */
DEVCB_NULL, /* Port A write */
DEVCB_INPUT_PORT("IN1"), /* Port B read */
DEVCB_NULL, /* Port B write */
DEVCB_NULL, /* Port C read */
DEVCB_DRIVER_MEMBER(gatron_state,output_port_1_w) /* Port C write */
};
/*************************
* Memory Map Information *
*************************/
static ADDRESS_MAP_START( gat_map, AS_PROGRAM, 8, gatron_state )
AM_RANGE(0x0000, 0x5fff) AM_ROM
AM_RANGE(0x6000, 0x63ff) AM_RAM_WRITE(gat_videoram_w) AM_SHARE("videoram")
AM_RANGE(0x8000, 0x87ff) AM_RAM AM_SHARE("nvram") /* battery backed RAM */
AM_RANGE(0xa000, 0xa000) AM_DEVWRITE("snsnd", sn76496_device, write) /* PSG */
AM_RANGE(0xe000, 0xe000) AM_WRITE(output_port_0_w) /* lamps */
ADDRESS_MAP_END
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(2)
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2)
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2)
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_CHANGED_MEMBER(DEVICE_SELF, madalien_state,coin_inserted, 0)
INPUT_PORTS_END
static const ay8910_interface ay8910_config =
{
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(madalien_state,madalien_portA_w),
DEVCB_DRIVER_MEMBER(madalien_state,madalien_portB_w)
};
static MACHINE_CONFIG_START( madalien, madalien_state )
/* main CPU */
MCFG_CPU_ADD("maincpu", M6502, MADALIEN_MAIN_CLOCK / 8) /* 1324kHz */
MCFG_CPU_PROGRAM_MAP(main_map)
MCFG_CPU_ADD("audiocpu", M6502, SOUND_CLOCK / 8) /* 512kHz */
MCFG_CPU_PROGRAM_MAP(audio_map)
MCFG_CPU_VBLANK_INT_DRIVER("screen", madalien_state, nmi_line_pulse)
/* video hardware */
WRITE8_MEMBER(apple2gs_state::a2bus_nmi_w)
{
m_maincpu->set_input_line(INPUT_LINE_NMI, data);
}
WRITE8_MEMBER(apple2gs_state::a2bus_inh_w)
{
m_inh_slot = data;
apple2_update_memory();
}
static const struct a2bus_interface a2bus_intf =
{
// interrupt lines
DEVCB_DRIVER_MEMBER(apple2gs_state,a2bus_irq_w),
DEVCB_DRIVER_MEMBER(apple2gs_state,a2bus_nmi_w),
DEVCB_DRIVER_MEMBER(apple2gs_state,a2bus_inh_w)
};
static SLOT_INTERFACE_START(apple2_cards)
SLOT_INTERFACE("diskii", A2BUS_DISKII) /* Disk II Controller Card */
SLOT_INTERFACE("mockingboard", A2BUS_MOCKINGBOARD) /* Sweet Micro Systems Mockingboard */
SLOT_INTERFACE("phasor", A2BUS_PHASOR) /* Applied Engineering Phasor */
SLOT_INTERFACE("cffa2", A2BUS_CFFA2) /* CFFA2000 Compact Flash for Apple II (www.dreher.net), 65C02/65816 firmware */
SLOT_INTERFACE("cffa202", A2BUS_CFFA2_6502) /* CFFA2000 Compact Flash for Apple II (www.dreher.net), 6502 firmware */
SLOT_INTERFACE("memexp", A2BUS_MEMEXP) /* Apple II Memory Expansion Card */
SLOT_INTERFACE("ramfactor", A2BUS_RAMFACTOR) /* Applied Engineering RamFactor */
SLOT_INTERFACE("thclock", A2BUS_THUNDERCLOCK) /* ThunderWare ThunderClock Plus */
SLOT_INTERFACE("ssc", A2BUS_SSC) /* Apple Super Serial Card */
SLOT_INTERFACE("sam", A2BUS_SAM) /* SAM Software Automated Mouth (8-bit DAC + speaker) */
};
static GFXDECODE_START( wink )
GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 4 )
GFXDECODE_END
READ8_MEMBER(wink_state::sound_r)
{
return m_sound_flag;
}
static const ay8910_interface ay8912_interface =
{
AY8910_LEGACY_OUTPUT,
AY8910_DEFAULT_LOADS,
DEVCB_DRIVER_MEMBER(wink_state,sound_r),
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL
};
//AY portA is fed by an input clock at 15625 Hz
INTERRUPT_GEN_MEMBER(wink_state::wink_sound)
{
m_sound_flag ^= 0x80;
}
void wink_state::machine_reset()
{
m_sound_flag = 0;
}
m_video_mode = BIT(data, 4);
if (!BIT(data, 5))
m_fdc->set_floppy(BIT(data, 6) ? m_floppy1->get_device() : m_floppy0->get_device());
// switch video modes
m_crtc->set_clock( m_video_mode ? XTAL_15MHz / 10 : XTAL_15MHz / 16);
m_crtc->set_hpixels_per_column( m_video_mode ? 10 : 16);
}
static const i8255_interface apricot_i8255a_intf =
{
DEVCB_DEVICE_MEMBER("centronics", centronics_device, read),
DEVCB_DEVICE_MEMBER("centronics", centronics_device, write),
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(apricot_state, apricot_sysctrl_w),
DEVCB_DRIVER_MEMBER(apricot_state, apricot_sysctrl_r),
DEVCB_NULL
};
WRITE_LINE_MEMBER( apricot_state::timer_out1 )
{
// receive clock via timer 1
if (m_data_selector_rts == 0 && m_data_selector_dtr == 0)
m_sio->rxca_w(state);
}
WRITE_LINE_MEMBER( apricot_state::timer_out2 )
{
// transmit clock via timer 2
if (m_data_selector_rts == 0 && m_data_selector_dtr == 0)
PA0 keyboard column 0
PA1 keyboard column 1
PA2 keyboard column 2
PA3 keyboard column 3
PA4 keyboard row 0
PA5 keyboard row 1
PA6 keyboard row 2
PA7 keyboard row 3
*/
}
static const pia6821_interface d6800_mc6821_intf =
{
DEVCB_DRIVER_MEMBER(d6800_state, d6800_keyboard_r), /* port A input */
DEVCB_DRIVER_MEMBER(d6800_state, d6800_cassette_r), /* port B input */
DEVCB_DRIVER_LINE_MEMBER(d6800_state, d6800_keydown_r), /* CA1 input */
DEVCB_DRIVER_LINE_MEMBER(d6800_state, d6800_rtc_pulse), /* CB1 input */
DEVCB_DRIVER_LINE_MEMBER(d6800_state, d6800_fn_key_r), /* CA2 input */
DEVCB_NULL, /* CB2 input */
DEVCB_DRIVER_MEMBER(d6800_state, d6800_keyboard_w), /* port A output */
DEVCB_DRIVER_MEMBER(d6800_state, d6800_cassette_w), /* port B output */
DEVCB_NULL, /* CA2 output */
DEVCB_DRIVER_LINE_MEMBER(d6800_state, d6800_screen_w), /* CB2 output */
DEVCB_CPU_INPUT_LINE("maincpu", M6800_IRQ_LINE), /* IRQA output */
DEVCB_CPU_INPUT_LINE("maincpu", M6800_IRQ_LINE) /* IRQB output */
};
/* Machine Initialization */
DEVCB_NULL,
DEVCB_NULL,
NULL
};
static MC6845_INTERFACE( lynx128k_crtc6845_interface )
{
false,
8, /* dots per character */
NULL,
lynx128k_update_row, /* callback to display one scanline */
NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_DRIVER_MEMBER(camplynx_state, lynx128k_irq), /* callback when cursor pin changes state */
DEVCB_NULL,
NULL
};
static MACHINE_CONFIG_START( lynx48k, camplynx_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", Z80, XTAL_4MHz)
MCFG_CPU_PROGRAM_MAP(lynx48k_mem)
MCFG_CPU_IO_MAP(lynx48k_io)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_REFRESH_RATE(50)
