Ejemplo n.º 1
0
struct st_page_header * st_read_page_header(xptr_t p, struct st_page_header * header)
{
    char * c;
    READ_PAGE(p);
    p = GET_PAGE_ADDRESS(p);
    c = (char *) XADDR(p);
    uint16_t trie_count;
    sptr_t all_trie_len;

    header->page = p;

    c += ST_PAGE_HEADER_OFFSET;
    CAST_AND_READ(trie_count, c);
    CAST_AND_READ(all_trie_len, c);
    header->trie_count = trie_count;
    header->tries = (sptr_t *) c;

    c += trie_count * sizeof(sptr_t);
    header->trie_offset = c - ((char *) XADDR(p));
    header->data_end = header->trie_offset + all_trie_len;

    header->free_space = PAGE_SIZE - header->data_end;

    return header;
}
Ejemplo n.º 2
0
xptr_t st_write_split_state(struct st_tmp_trie * new_state)
{
    struct state_descriptor dsc;
    struct st_page_header newpg;

    xptr_t parent_state = new_state->old_state;
    char * buf = new_state->buf2;
    size_t buflen = new_state->len2;
    int lower_edge = new_state->hint_edge;

    char * state = (char *) XADDR(parent_state);
    READ_PAGE(parent_state);
    state = read_state(state, &dsc);
    int n = dsc.edge_count;
    xptr_t * candidates = (xptr_t *) malloc(sizeof(xptr_t) * n);
    xptr_t c;
    xptr_t result;

    for (int i = 0; i < n; ++i) {
        struct state_descriptor tmp;
        read_state(state + dsc.pointers[i], &tmp);
        if ((tmp.flags & STATE_LONG_JUMP) > 0) {
            candidates[i] = tmp.long_jump;
        } else {
            candidates[i] = XNULL;
        }
    }

    c = select_candidate(candidates, n, buflen + sizeof(sptr_t)); //it's important to search candidate basing on full size of changes not only on string length.

    free(candidates);

    if (c == XNULL) {
//        U_ASSERT(false);
        st_markup_page(&newpg, 1, true);
        memcpy((char *) XADDR(newpg.page) + newpg.trie_offset, buf, buflen);
        newpg.data_end = newpg.trie_offset + buflen;
        st_write_page_header(&newpg);
    } else {
        c = GET_PAGE_ADDRESS(c);
        char * page_start = (char *) XADDR(c);
        st_read_page_header(c, &newpg);
        WRITE_PAGE(c);

        /* Add new trie to the end of the trie array */

        newpg.trie_count++;
        memmove_ABd(page_start + newpg.trie_offset, page_start + newpg.data_end, sizeof(sptr_t));
        newpg.tries[newpg.trie_count - 1] = newpg.data_end - newpg.trie_offset;
        newpg.data_end += sizeof(sptr_t);
        newpg.trie_offset += sizeof(sptr_t);
        memcpy(page_start + newpg.data_end, buf, buflen);
        newpg.data_end += buflen;
        st_write_page_header(&newpg);
    }

    result = newpg.page + newpg.trie_offset - sizeof(sptr_t);
    return result;
}
Ejemplo n.º 3
0
struct st_page_header * st_write_page_header(struct st_page_header * header)
{
    char * c;
    WRITE_PAGE(header->page);
    c = (char *) XADDR(GET_PAGE_ADDRESS(header->page));
    uint16_t trie_count = header->trie_count;
    sptr_t all_trie_len = header->data_end - header->trie_offset;

    c += ST_PAGE_HEADER_OFFSET;
    CAST_AND_WRITE(c, trie_count);
    CAST_AND_WRITE(c, all_trie_len);

    return header;
}
Ejemplo n.º 4
0
static char * st_fix_parent_pointers(xptr_t parent_state, xptr_t split_page, char * trie_array_base)
{
    struct st_page_header ph;
    struct state_descriptor dsc;

    st_read_page_header(parent_state, &ph);

    char * base = (char*) XADDR(ph.page) + ph.trie_offset;
    char * state = base;
    char * next_state;
    char * end = (char*) XADDR(ph.page) + ph.data_end;

    while (state < end) {
        next_state = read_state(state, &dsc);
        if ((dsc.long_jump != XNULL) && (GET_PAGE_ADDRESS(dsc.long_jump) == split_page)) {
            tries[((char *) XADDR(dsc.long_jump) - trie_array_base) / sizeof(sptr_t)].parent_offset = state - base;
        }

        state = next_state;
    }

    return base;
}
Ejemplo n.º 5
0
/**************************************************************************************************
 * @fn          sbCmnd
 *
 * @brief       Act on the SB command and received buffer.
 *
 * input parameters
 *
 * @param 		sbCmd - Received SBL command.
 * @param		payload_len - Length of command payload
 *
 * output parameters
 *
 * None.
 *
 * @return      TRUE to indicate that the SB_ENABLE_CMD command was successful; FALSE otherwise.
 **************************************************************************************************
 */
static uint8 sbCmnd(uint8 sbCmd, uint32 payload_len)
{
    uint32        firstAddr;
    uint32        lastAddr;
    uint32        operationLength;
    uint32        writeLength;
    uint32        respPayloadLen = 0;
    uint32        pageNumber;
    uint32        i;
    uint32        actual_number_of_data_bytes_to_send;
    uint8         paddingLength;
    uint8         rsp = SB_SUCCESS;
    uint8         imageEnabledSuccessfully = FALSE;
    uint8         *pBuf;

    pBuf = sbBuf;

    switch (sbCmd)
    {
    case SB_HANDSHAKE_CMD:
        /* Mark all pages as not-deleted-yet */
        memset(pageDeleted, 0, sizeof(pageDeleted));

        UINT32_TO_BUF_LITTLE_ENDIAN(pBuf, SB_BOOTLOADER_REVISION);
        *pBuf++ = SB_DEVICE_TYPE_2538;
        UINT32_TO_BUF_LITTLE_ENDIAN(pBuf, SB_RW_BUF_LEN );
        UINT32_TO_BUF_LITTLE_ENDIAN(pBuf, SB_DEVICE_PAGE_SIZE);
        respPayloadLen = pBuf - sbBuf;
        break;

    case SB_WRITE_CMD:
        firstAddr = BUF_TO_UINT32_LITTLE_ENDIAN(pBuf);
        operationLength = BUF_TO_UINT32_LITTLE_ENDIAN(pBuf);

        /* The payload_len includes the addr_offset
         * and the operationLength fields. The value
         * (pBuf - sbBuf) gives the number of bytes
         * used by those firelds. The remaining bytes
         *  are the actual data bytes to be written.
         */
        writeLength = payload_len - (pBuf - sbBuf);
        lastAddr = firstAddr + operationLength - 1;
        if ((firstAddr < FLASH_BASE) ||
                (lastAddr > CC2538_CODE_FLASH_END_ADDRESS) ||
                (writeLength > operationLength))
        {
            rsp = SB_FAILURE;
            break;
        }

        /* Before writing to a flash page for the first time during a bootloading session, the
         * page must be erased. The following section makes sure that every page being written
         * to have already been erased, otherwise, it erases it (before writing to it).
         * Note that the write command may span over more than a single page.
         */
        for (pageNumber = GET_PAGE_NUMBER(firstAddr); pageNumber <= GET_PAGE_NUMBER(lastAddr); pageNumber++)
        {
            if (!IS_PAGE_ERASED(pageNumber))
            {
                if (FlashMainPageErase(GET_PAGE_ADDRESS(pageNumber)) != 0)
                {
                    rsp = SB_FAILURE;
                    break;
                }

                MARK_PAGE_ERASED(pageNumber);
            }
        }

        /* Note that the start address (firstAddr) and the byte count (writeLength) must be
         * word aligned. The start address is expected to be already aligned (by the SBL server),
         * since aligning it here would require padding the buffer's start, which would require
         * shifting the buffer content (as the buffer is passesd as (uint32_t *pui32Data) so it
         * should be aligned by itself. The byte count is aligned below.
         */
        paddingLength = ((4 - (writeLength & 0x00000003)) % 4);
        for (i = 0; i < paddingLength; i++)
        {
            pBuf[writeLength + i] = 0xFF;
        }
        writeLength += paddingLength;


        /* If the page was successfully erased (or was previously erased), perform the write action.
         * Note that pBuf must point to a uint32-aligned address, as required by FlashMainPageProgram().
         * This is the case now (the prefixing field are total of 8 bytes), and _sbBuf is 32bit aligned.
         */
        if ((rsp == SB_SUCCESS) && (writeLength > 0) &&
                (FlashMainPageProgram((uint32_t *)(pBuf), firstAddr, writeLength) != 0))
        {
            rsp = SB_FAILURE;
        }

        break;

    case SB_READ_CMD:
        firstAddr = BUF_TO_UINT32_LITTLE_ENDIAN(pBuf);
        operationLength = BUF_TO_UINT32_LITTLE_ENDIAN(pBuf);
        lastAddr = firstAddr + operationLength - 1;

        if ((firstAddr < FLASH_BASE) ||
                (lastAddr > CC2538_CODE_FLASH_END_ADDRESS) ||
                (operationLength > sizeof(_sbBuf)))
        {
            rsp = SB_FAILURE;
            break;
        }

#if !MT_SYS_OSAL_NV_READ_CERTIFICATE_DATA
#if (HAL_IMG_A_BEG > HAL_NV_START_ADDR)
#warning This check assumes NV PAGES located at the end of the program flash memory
#endif
        if (GET_PAGE_NUMBER(lastAddr) >= HAL_NV_PAGE_BEG)
        {
            rsp = SB_FAILURE;
            break;
        }
#endif

        /* If the end of the buffer is made only of 0xFF characters, no need to
         *  send them. Find out the number of bytes that needs to be sent:
         */
        for (actual_number_of_data_bytes_to_send = operationLength;
                (actual_number_of_data_bytes_to_send > 0) && ((*(uint8 *)(firstAddr + actual_number_of_data_bytes_to_send - 1)) == 0xFF);
                actual_number_of_data_bytes_to_send--);

        /* As a future upgrade, memcopy can be avoided. Instead,
         * may pass a pointer to the actual flash address
         */
        (void)memcpy(pBuf, (const void *)firstAddr, actual_number_of_data_bytes_to_send);
        respPayloadLen = (pBuf - sbBuf) + actual_number_of_data_bytes_to_send;
        break;

    case SB_ENABLE_CMD:
        if (enableImg())
        {
            imageEnabledSuccessfully = TRUE;
        }
        else
        {
            rsp = SB_VALIDATE_FAILED;
        }
        break;

    default:
        break;
    }

    sbResp(sbCmd, rsp, respPayloadLen);
    return imageEnabledSuccessfully;
}
Ejemplo n.º 6
0
static xptr_t st_split_promote_root(struct st_page_header * root_page_hdr, int parent_free_space, xptr_t parent_position, int cpage)
{
    struct state_descriptor dsc;
    xptr_t rtp = XNULL, ltp = XNULL;
    int total_length;
    int break_point;
    int n;
    int root_length;

    READ_PAGE(root_page_hdr->page);
    read_state(get_root_state(root_page_hdr), &dsc);
    n = dsc.edge_count;

    total_length = build_segments(dsc.p + dsc.len, dsc.pointers, source, tries, n);
    for (int i = 0; i < n; i++) {
        tries[i].id = i;
    }

    root_length = dsc.len + n * (sizeof(xptr_t) + sizeof(flags_t));

    if (root_length <= parent_free_space) {
        char * buf = root_buffer;
        struct st_tmp_trie trie = {};
        struct st_page_header * pghdr = root_page_hdr;

        memcpy(buf, dsc.p, dsc.len);

        ltp = root_page_hdr->page;

        st_read_page_header(GET_PAGE_ADDRESS(parent_position), pghdr);

        trie.state = (char *) XADDR(parent_position) - (char *) XADDR(pghdr->page) - pghdr->trie_offset;
        trie.state_len = sizeof(xptr_t) + sizeof(flags_t);
        trie.buf = buf;
        trie.len = root_length;
        trie.buf2 = NULL;

        st_new_state_write(pghdr, &trie);

        READ_PAGE(parent_position);
        read_state((char *) XADDR(parent_position), &dsc);
    } else {
        // TODO: PROMOTE ROOT!
        U_ASSERT(cpage==0);
        parent_position = root_page_hdr->page;
        root_page_hdr->data_end = root_page_hdr->trie_offset + root_length;
    }

    break_point = write_segments(tries, n, total_length, &ltp, &rtp, source);

    WRITE_PAGE(root_page_hdr->page);

    (* (flags_t *) dsc.p) |= STATE_SPLIT_POINT;

    for (int i = 0; i < n; i++) {
        dsc.pointers[tries[i].id] = i * (sizeof(xptr_t) + sizeof(flags_t));
    }

    write_jump_list(&dsc, tries, ltp, 0, break_point);

    if (rtp != XNULL) {
        write_jump_list(&dsc, tries, rtp, break_point, n);
    }

    st_write_page_header(root_page_hdr);

    return ltp;
}