void RotatePoint( wxPoint* point, const wxPoint& centre, double angle )
{
int ox, oy;
ox = point->x - centre.x;
oy = point->y - centre.y;
RotatePoint( &ox, &oy, angle );
point->x = ox + centre.x;
point->y = oy + centre.y;
}
bool TEXTE_MODULE::TextHitTest( const wxPoint& aPoint, int aAccuracy ) const
{
EDA_RECT rect = GetTextBox( -1 );
wxPoint location = aPoint;
rect.Inflate( aAccuracy );
RotatePoint( &location, GetTextPos(), -GetDrawRotation() );
return rect.Contains( location );
}
EDA_RECT LIB_TEXT::GetBoundingBox() const
{
/* Y coordinates for LIB_ITEMS are bottom to top, so we must invert the Y position when
* calling GetTextBox() that works using top to bottom Y axis orientation.
*/
EDA_RECT rect = GetTextBox( -1, -1, true );
wxPoint orig = rect.GetOrigin();
wxPoint end = rect.GetEnd();
NEGATE( orig.y);
NEGATE( end.y);
RotatePoint( &orig, m_Pos, -m_Orient );
RotatePoint( &end, m_Pos, -m_Orient );
rect.SetOrigin( orig );
rect.SetEnd( end );
rect.Normalize();
return rect;
}
void LIB_POLYLINE::Rotate( const wxPoint& aCenter, bool aRotateCCW )
{
int rot_angle = aRotateCCW ? -900 : 900;
size_t i, imax = m_PolyPoints.size();
for( i = 0; i < imax; i++ )
{
RotatePoint( &m_PolyPoints[i], aCenter, rot_angle );
}
}
//Draws radar arm at new angle
void DrawRadarArm(float radAngle) {
//Erase old line
DrawLine(radarX, radarY, sweepArm.x, sweepArm.y, BLACK);
//define 'north' tip position of sweep arm
sweepArm.x=radarX;
sweepArm.y=radarY-16;
//Rotate point about centre
RotatePoint(&sweepArm, radarX, radarY, radAngle);
//Draw new arm
DrawLine(radarX,radarY, sweepArm.x, sweepArm.y, GREEN);
}
void EDA_TEXT::GetPositionsOfLinesOfMultilineText(
std::vector<wxPoint>& aPositions, int aLineCount ) const
{
wxPoint pos = m_Pos; // Position of first line of the
// multiline text according to
// the center of the multiline text block
wxPoint offset; // Offset to next line.
offset.y = GetInterline();
if( aLineCount > 1 )
{
switch( m_VJustify )
{
case GR_TEXT_VJUSTIFY_TOP:
break;
case GR_TEXT_VJUSTIFY_CENTER:
pos.y -= ( aLineCount - 1 ) * offset.y / 2;
break;
case GR_TEXT_VJUSTIFY_BOTTOM:
pos.y -= ( aLineCount - 1 ) * offset.y;
break;
}
}
// Rotate the position of the first line
// around the center of the multiline text block
RotatePoint( &pos, m_Pos, m_Orient );
// Rotate the offset lines to increase happened in the right direction
RotatePoint( &offset, m_Orient );
for( int ii = 0; ii < aLineCount; ii++ )
{
aPositions.push_back( pos );
pos += offset;
}
}
void
ViewerRenderer::Isometric()
{
Top();
float cameraPosition[3], cameraTarget[3], cameraUp[3], axis[3], origin[3];
GetCamera(cameraPosition, cameraTarget, cameraUp);
axis[0] = -1.0f / (float)sqrt(2.0);
axis[1] = 1.0f / (float)sqrt(2.0);
axis[2] = 0;
RotatePoint(cameraPosition, 45, cameraTarget, axis, cameraPosition);
cameraUp[0] = -1;
cameraUp[1] = -1;
cameraUp[2] = 0;
origin[0] = 0;
origin[1] = 0;
origin[2] = 0;
RotatePoint(cameraUp, 45, origin, axis, cameraUp);
SetCamera(cameraPosition, cameraTarget, cameraUp);
}
void RotatePoint( double* pX, double* pY, double cx, double cy, double angle )
{
double ox, oy;
ox = *pX - cx;
oy = *pY - cy;
RotatePoint( &ox, &oy, angle );
*pX = ox + cx;
*pY = oy + cy;
}
void RotatePoint( int* pX, int* pY, int cx, int cy, double angle )
{
int ox, oy;
ox = *pX - cx;
oy = *pY - cy;
RotatePoint( &ox, &oy, angle );
*pX = ox + cx;
*pY = oy + cy;
}
//===========================================================================
//
// Parameter: -
// Returns: -
// Changes Globals: -
//===========================================================================
int AAS_TransformPlane(int planenum, vec3_t origin, vec3_t angles)
{
float newdist, matrix[3][3];
vec3_t normal;
//rotate the node plane
VectorCopy(mapplanes[planenum].normal, normal);
CreateRotationMatrix(angles, matrix);
RotatePoint(normal, matrix);
newdist = mapplanes[planenum].dist + DotProduct(normal, origin);
return FindFloatPlane(normal, newdist);
} //end of the function AAS_TransformPlane
void TEXTE_MODULE::Rotate( const wxPoint& aRotCentre, double aAngle )
{
// Used in footprint edition
// Note also in module editor, m_Pos0 = m_Pos
wxPoint pt = GetTextPos();
RotatePoint( &pt, aRotCentre, aAngle );
SetTextPos( pt );
SetTextAngle( GetTextAngle() + aAngle );
SetLocalCoord();
}
/**
* Function TransformRingToPolygon
* Creates a polygon from a ring
* Convert arcs to multiple straight segments
* @param aCornerBuffer = a buffer to store the polygon
* @param aCentre = centre of the arc or circle
* @param aRadius = radius of the circle
* @param aCircleToSegmentsCount = the number of segments to approximate a circle
* @param aWidth = width (thickness) of the ring
*/
void TransformRingToPolygon( SHAPE_POLY_SET& aCornerBuffer,
wxPoint aCentre, int aRadius,
int aCircleToSegmentsCount, int aWidth )
{
int delta = 3600 / aCircleToSegmentsCount; // rotate angle in 0.1 degree
// Compute the corners posituions and creates poly
wxPoint curr_point;
int inner_radius = aRadius - ( aWidth / 2 );
int outer_radius = inner_radius + aWidth;
aCornerBuffer.NewOutline();
// Draw the inner circle of the ring
for( int ii = 0; ii < 3600; ii += delta )
{
curr_point.x = inner_radius;
curr_point.y = 0;
RotatePoint( &curr_point, ii );
curr_point += aCentre;
aCornerBuffer.Append( curr_point.x, curr_point.y );
}
// Draw the last point of inner circle
aCornerBuffer.Append( aCentre.x + inner_radius, aCentre.y );
// Draw the outer circle of the ring
for( int ii = 0; ii < 3600; ii += delta )
{
curr_point.x = outer_radius;
curr_point.y = 0;
RotatePoint( &curr_point, -ii );
curr_point += aCentre;
aCornerBuffer.Append( curr_point.x, curr_point.y );
}
// Draw the last point of outer circle
aCornerBuffer.Append( aCentre.x + outer_radius, aCentre.y );
aCornerBuffer.Append( aCentre.x + inner_radius, aCentre.y );
}
void SCH_SHEET::Rotate(wxPoint aPosition)
{
RotatePoint( &m_pos, aPosition, 900 );
RotatePoint( &m_size.x, &m_size.y, 900 );
if( m_size.x < 0 )
{
m_pos.x += m_size.x;
m_size.x = -m_size.x;
}
if( m_size.y < 0 )
{
m_pos.y += m_size.y;
m_size.y = -m_size.y;
}
for( SCH_SHEET_PIN& sheetPin : m_pins )
{
sheetPin.Rotate( aPosition );
}
}
const EDA_RECT SCH_LABEL::GetBoundingBox() const
{
int linewidth = GetThickness() == 0 ? GetDefaultLineThickness() : GetThickness();
EDA_RECT rect = GetTextBox( -1, linewidth );
if( GetTextAngle() != 0.0 )
{
// Rotate rect
wxPoint pos = rect.GetOrigin();
wxPoint end = rect.GetEnd();
RotatePoint( &pos, GetTextPos(), GetTextAngle() );
RotatePoint( &end, GetTextPos(), GetTextAngle() );
rect.SetOrigin( pos );
rect.SetEnd( end );
rect.Normalize();
}
return rect;
}
void C_Quaternion::RotatePoint(C_Vector3* p1 , const C_Vector3* rotationPoint) const
{
C_Vector3 tmp;
tmp.x = p1->x - rotationPoint->x;
tmp.y = p1->y - rotationPoint->y;
tmp.z = p1->z - rotationPoint->z;
RotatePoint(&tmp);
tmp.Translate(rotationPoint);
p1->SetVector(tmp);
}
void D_PAD::SetLocalCoord()
{
MODULE* module = (MODULE*) m_Parent;
if( module == NULL )
{
m_Pos0 = m_Pos;
return;
}
m_Pos0 = m_Pos - module->GetPosition();
RotatePoint( &m_Pos0.x, &m_Pos0.y, -module->GetOrientation() );
}
// Returns the position of the pad.
wxPoint D_PAD::ShapePos() const
{
if( m_Offset.x == 0 && m_Offset.y == 0 )
return m_Pos;
wxPoint loc_offset = m_Offset;
RotatePoint( &loc_offset, m_Orient );
wxPoint shape_pos = m_Pos + loc_offset;
return shape_pos;
}
/**
* Place this drawable relative to its parent
*
* This works hierarchically from top item down.
* \param offset Parent offset
* \param rotate Parent rotation
*/
void CDrawable::Place(Gdiplus::Point offset, double rotate)
{
// Combine the transformation we are given with the transformation
// for this object.
mPlacedPosition = offset + RotatePoint(mPosition, rotate);
mPlacedR = mRotation + rotate;
// Update our children
for (auto drawable : mChildren)
{
drawable->Place(mPlacedPosition, mPlacedR);
}
}
void GBR_TO_PCB_EXPORTER::export_segarc_copper_item( GERBER_DRAW_ITEM* aGbrItem, LAYER_NUM aLayer )
{
double a = atan2( (double) ( aGbrItem->m_Start.y - aGbrItem->m_ArcCentre.y ),
(double) ( aGbrItem->m_Start.x - aGbrItem->m_ArcCentre.x ) );
double b = atan2( (double) ( aGbrItem->m_End.y - aGbrItem->m_ArcCentre.y ),
(double) ( aGbrItem->m_End.x - aGbrItem->m_ArcCentre.x ) );
wxPoint start = aGbrItem->m_Start;
wxPoint end = aGbrItem->m_End;
/* Because Pcbnew does not know arcs in tracks,
* approximate arc by segments (SEG_COUNT__CIRCLE segment per 360 deg)
* The arc is drawn in an anticlockwise direction from the start point to the end point.
*/
#define SEG_COUNT_CIRCLE 16
#define DELTA_ANGLE 2 * M_PI / SEG_COUNT_CIRCLE
// calculate the number of segments from a to b.
// we want CNT_PER_360 segments fo a circle
if( a > b )
b += 2 * M_PI;
wxPoint curr_start = start;
wxPoint seg_start, seg_end;
int ii = 1;
for( double rot = a; rot < (b - DELTA_ANGLE); rot += DELTA_ANGLE, ii++ )
{
seg_start = curr_start;
wxPoint curr_end = start;
RotatePoint( &curr_end, aGbrItem->m_ArcCentre,
-RAD2DECIDEG( DELTA_ANGLE * ii ) );
seg_end = curr_end;
// Reverse Y axis:
NEGATE( seg_start.y );
NEGATE( seg_end.y );
writePcbLineItem( 0, TRACK_TYPE, seg_start, seg_end, aGbrItem->m_Size.x, aLayer, -1 );
curr_start = curr_end;
}
if( end != curr_start )
{
seg_start = curr_start;
seg_end = end;
// Reverse Y axis:
NEGATE( seg_start.y );
NEGATE( seg_end.y );
writePcbLineItem( 0, TRACK_TYPE, seg_start, seg_end, aGbrItem->m_Size.x, aLayer, -1 );
}
}
/**
* Function TransformArcToPolygon
* Creates a polygon from an Arc
* Convert arcs to multiple straight segments
* @param aCornerBuffer = a buffer to store the polygon
* @param aCentre = centre of the arc or circle
* @param aStart = start point of the arc, or a point on the circle
* @param aArcAngle = arc angle in 0.1 degrees. For a circle, aArcAngle = 3600
* @param aCircleToSegmentsCount = the number of segments to approximate a circle
* @param aWidth = width (thickness) of the line
*/
void TransformArcToPolygon( SHAPE_POLY_SET& aCornerBuffer,
wxPoint aCentre, wxPoint aStart, double aArcAngle,
int aCircleToSegmentsCount, int aWidth )
{
wxPoint arc_start, arc_end;
int delta = 3600 / aCircleToSegmentsCount; // rotate angle in 0.1 degree
arc_end = arc_start = aStart;
if( aArcAngle != 3600 )
{
RotatePoint( &arc_end, aCentre, -aArcAngle );
}
if( aArcAngle < 0 )
{
std::swap( arc_start, arc_end );
aArcAngle = -aArcAngle;
}
// Compute the ends of segments and creates poly
wxPoint curr_end = arc_start;
wxPoint curr_start = arc_start;
for( int ii = delta; ii < aArcAngle; ii += delta )
{
curr_end = arc_start;
RotatePoint( &curr_end, aCentre, -ii );
TransformRoundedEndsSegmentToPolygon( aCornerBuffer, curr_start, curr_end,
aCircleToSegmentsCount, aWidth );
curr_start = curr_end;
}
if( curr_end != arc_end )
TransformRoundedEndsSegmentToPolygon( aCornerBuffer,
curr_end, arc_end,
aCircleToSegmentsCount, aWidth );
}
void D_PAD::SetDrawCoord()
{
MODULE* module = (MODULE*) m_Parent;
m_Pos = m_Pos0;
if( module == NULL )
return;
double angle = module->GetOrientation();
RotatePoint( &m_Pos.x, &m_Pos.y, angle );
m_Pos += module->GetPosition();
}
// Update "local" coordinates (coordinates relatives to the footprint
// anchor point)
void TEXTE_MODULE::SetLocalCoord()
{
MODULE* module = (MODULE*) m_Parent;
if( module == NULL )
{
m_Pos0 = m_Pos;
return;
}
m_Pos0 = m_Pos - module->GetPosition();
double angle = module->GetOrientation();
RotatePoint( &m_Pos0.x, &m_Pos0.y, -angle );
}
const EDA_RECT LIB_TEXT::GetBoundingBox() const
{
/* Y coordinates for LIB_ITEMS are bottom to top, so we must invert the Y position when
* calling GetTextBox() that works using top to bottom Y axis orientation.
*/
EDA_RECT rect = GetTextBox( -1, -1, true );
rect.RevertYAxis();
// We are using now a bottom to top Y axis.
wxPoint orig = rect.GetOrigin();
wxPoint end = rect.GetEnd();
RotatePoint( &orig, GetTextPos(), -GetTextAngle() );
RotatePoint( &end, GetTextPos(), -GetTextAngle() );
rect.SetOrigin( orig );
rect.SetEnd( end );
// We are using now a top to bottom Y axis:
rect.RevertYAxis();
return rect;
}
EDA_RECT SCH_TEXT::GetBoundingBox() const
{
// We must pass the effective text thickness to GetTextBox
// when calculating the bounding box
int linewidth = ( m_Thickness == 0 ) ? GetDefaultLineThickness() : m_Thickness;
linewidth = Clamp_Text_PenSize( linewidth, m_Size, m_Bold );
EDA_RECT rect = GetTextBox( -1, linewidth );
if( m_Orient ) // Rotate rect
{
wxPoint pos = rect.GetOrigin();
wxPoint end = rect.GetEnd();
RotatePoint( &pos, m_Pos, m_Orient );
RotatePoint( &end, m_Pos, m_Orient );
rect.SetOrigin( pos );
rect.SetEnd( end );
}
rect.Normalize();
return rect;
}
void TEXTE_MODULE::SetDrawCoord()
{
const MODULE* module = static_cast<const MODULE*>( m_Parent );
m_Pos = m_Pos0;
if( module )
{
double angle = module->GetOrientation();
RotatePoint( &m_Pos.x, &m_Pos.y, angle );
m_Pos += module->GetPosition();
}
}
void TEXTE_MODULE::SetLocalCoord()
{
const MODULE* module = static_cast<const MODULE*>( m_Parent );
if( module )
{
m_Pos0 = m_Pos - module->GetPosition();
double angle = module->GetOrientation();
RotatePoint( &m_Pos0.x, &m_Pos0.y, -angle );
}
else
{
m_Pos0 = m_Pos;
}
}
void convertOblong2Segment( wxSize aSize, double aOrient, wxPoint& aStart, wxPoint& aEnd )
{
wxSize size( aSize );
double orient = aOrient;
/* The pad will be drawn as an oblong shape with size.y > size.x
* (Oval vertical orientation 0)
*/
if( size.x > size.y )
{
std::swap( size.x, size.y );
orient = AddAngles( orient, 900 );
}
int deltaxy = size.y - size.x; // distance between centers of the oval
int cx = 0;
int cy = deltaxy / 2;
RotatePoint( &cx, &cy, orient );
aStart = wxPoint( cx, cy );
cx = 0; cy = -deltaxy / 2;
RotatePoint( &cx, &cy, orient );
aEnd = wxPoint( cx, cy );
}
void ZONE_CONTAINER::Rotate( const wxPoint& centre, double angle )
{
wxPoint pos;
for( unsigned ic = 0; ic < m_Poly->m_CornersList.GetCornersCount(); ic++ )
{
pos = m_Poly->m_CornersList.GetPos( ic );
RotatePoint( &pos, centre, angle );
m_Poly->SetX( ic, pos.x );
m_Poly->SetY( ic, pos.y );
}
m_Poly->Hatch();
/* rotate filled areas: */
for( SHAPE_POLY_SET::ITERATOR ic = m_FilledPolysList.Iterate(); ic; ++ic )
RotatePoint( &ic->x, &ic->y, centre.x, centre.y, angle );
for( unsigned ic = 0; ic < m_FillSegmList.size(); ic++ )
{
RotatePoint( &m_FillSegmList[ic].m_Start, centre, angle );
RotatePoint( &m_FillSegmList[ic].m_End, centre, angle );
}
}
void PSLIKE_PLOTTER::FlashPadRect( const wxPoint& aPadPos, const wxSize& aSize,
double aPadOrient, EDA_DRAW_MODE_T aTraceMode, void* aData )
{
static std::vector< wxPoint > cornerList;
wxSize size( aSize );
cornerList.clear();
if( aTraceMode == FILLED )
SetCurrentLineWidth( 0 );
else
SetCurrentLineWidth( USE_DEFAULT_LINE_WIDTH );
size.x -= GetCurrentLineWidth();
size.y -= GetCurrentLineWidth();
if( size.x < 1 )
size.x = 1;
if( size.y < 1 )
size.y = 1;
int dx = size.x / 2;
int dy = size.y / 2;
wxPoint corner;
corner.x = aPadPos.x - dx;
corner.y = aPadPos.y + dy;
cornerList.push_back( corner );
corner.x = aPadPos.x - dx;
corner.y = aPadPos.y - dy;
cornerList.push_back( corner );
corner.x = aPadPos.x + dx;
corner.y = aPadPos.y - dy;
cornerList.push_back( corner );
corner.x = aPadPos.x + dx;
corner.y = aPadPos.y + dy,
cornerList.push_back( corner );
for( unsigned ii = 0; ii < cornerList.size(); ii++ )
{
RotatePoint( &cornerList[ii], aPadPos, aPadOrient );
}
cornerList.push_back( cornerList[0] );
PlotPoly( cornerList, ( aTraceMode == FILLED ) ? FILLED_SHAPE : NO_FILL,
GetCurrentLineWidth() );
}
void HPGL_PLOTTER::FlashPadTrapez( const wxPoint& aPadPos, const wxPoint* aCorners,
double aPadOrient, EDA_DRAW_MODE_T aTrace_Mode )
{
std::vector< wxPoint > cornerList;
cornerList.reserve( 4 );
for( int ii = 0; ii < 4; ii++ )
{
wxPoint coord( aCorners[ii] );
RotatePoint( &coord, aPadOrient );
coord += aPadPos;
cornerList.push_back( coord );
}
PlotPoly( cornerList, aTrace_Mode == FILLED ? FILLED_SHAPE : NO_FILL );
}
