Ejemplo n.º 1
0
static void verdex_init(ram_addr_t ram_size,
                const char *boot_device,
                const char *kernel_filename, const char *kernel_cmdline,
                const char *initrd_filename, const char *cpu_model)
{
    PXA2xxState *cpu;
    int index;

    uint32_t verdex_rom = 0x02000000;
    uint32_t verdex_ram = 0x10000000;

    cpu = pxa270_init(verdex_ram, cpu_model ?: "pxa270-c0");

    index = drive_get_index(IF_PFLASH, 0, 0);
    if (index == -1) {
        fprintf(stderr, "A flash image must be given with the "
                "'pflash' parameter\n");
        exit(1);
    }

    if (!pflash_cfi01_register(0x00000000, qemu_ram_alloc(verdex_rom),
            drives_table[index].bdrv, sector_len, verdex_rom / sector_len,
            2, 0, 0, 0, 0)) {
        fprintf(stderr, "qemu: Error registering flash memory.\n");
        exit(1);
    }

    cpu->env->regs[15] = 0x00000000;

    /* Interrupt line of NIC is connected to GPIO line 99 */
    smc91c111_init(&nd_table[0], 0x04000300,
                    pxa2xx_gpio_in_get(cpu->gpio)[99]);
}
Ejemplo n.º 2
0
Archivo: r2d.c Proyecto: agocke/qemu
static void r2d_init(ram_addr_t ram_size, int vga_ram_size,
              const char *boot_device,
	      const char *kernel_filename, const char *kernel_cmdline,
	      const char *initrd_filename, const char *cpu_model)
{
    CPUState *env;
    struct SH7750State *s;
    ram_addr_t sdram_addr, sm501_vga_ram_addr;
    qemu_irq *irq;
    PCIBus *pci;
    int i;

    if (!cpu_model)
        cpu_model = "SH7751R";

    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }

    /* Allocate memory space */
    sdram_addr = qemu_ram_alloc(SDRAM_SIZE);
    cpu_register_physical_memory(SDRAM_BASE, SDRAM_SIZE, sdram_addr);
    /* Register peripherals */
    s = sh7750_init(env);
    irq = r2d_fpga_init(0x04000000, sh7750_irl(s));
    pci = sh_pci_register_bus(r2d_pci_set_irq, r2d_pci_map_irq, irq, 0, 4);

    sm501_vga_ram_addr = qemu_ram_alloc(SM501_VRAM_SIZE);
    sm501_init(0x10000000, sm501_vga_ram_addr, SM501_VRAM_SIZE,
	       serial_hds[2]);

    /* onboard CF (True IDE mode, Master only). */
    mmio_ide_init(0x14001000, 0x1400080c, irq[CF_IDE], 1,
        drives_table[drive_get_index(IF_IDE, 0, 0)].bdrv, NULL);

    /* NIC: rtl8139 on-board, and 2 slots. */
    pci_nic_init(pci, &nd_table[0], 2 << 3, "rtl8139");
    for (i = 1; i < nb_nics; i++)
        pci_nic_init(pci, &nd_table[i], -1, "ne2k_pci");

    /* Todo: register on board registers */
    {
      int kernel_size;
      /* initialization which should be done by firmware */
      stl_phys(SH7750_BCR1, 1<<3); /* cs3 SDRAM */
      stw_phys(SH7750_BCR2, 3<<(3*2)); /* cs3 32bit */

      kernel_size = load_image(kernel_filename, phys_ram_base);

      if (kernel_size < 0) {
        fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
        exit(1);
      }

      env->pc = SDRAM_BASE | 0xa0000000; /* Start from P2 area */
    }
}
Ejemplo n.º 3
0
static void mainstone_common_init(ram_addr_t ram_size,
                const char *kernel_filename,
                const char *kernel_cmdline, const char *initrd_filename,
                const char *cpu_model, enum mainstone_model_e model, int arm_id)
{
    uint32_t sector_len = 256 * 1024;
    target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
    PXA2xxState *cpu;
    qemu_irq *mst_irq;
    int i, index;

    if (!cpu_model)
        cpu_model = "pxa270-c5";

    /* Setup CPU & memory */
    cpu = pxa270_init(mainstone_binfo.ram_size, cpu_model);
    cpu_register_physical_memory(0, MAINSTONE_ROM,
                    qemu_ram_alloc(MAINSTONE_ROM) | IO_MEM_ROM);

    /* Setup initial (reset) machine state */
    cpu->env->regs[15] = mainstone_binfo.loader_start;

    /* There are two 32MiB flash devices on the board */
    for (i = 0; i < 2; i ++) {
        index = drive_get_index(IF_PFLASH, 0, i);
        if (index == -1) {
            fprintf(stderr, "Two flash images must be given with the "
                    "'pflash' parameter\n");
            exit(1);
        }

        if (!pflash_cfi01_register(mainstone_flash_base[i],
                                qemu_ram_alloc(MAINSTONE_FLASH),
                                drives_table[index].bdrv, sector_len,
                                MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0)) {
            fprintf(stderr, "qemu: Error registering flash memory.\n");
            exit(1);
        }
    }

    mst_irq = mst_irq_init(cpu, MST_FPGA_PHYS, PXA2XX_PIC_GPIO_0);

    /* setup keypad */
    printf("map addr %p\n", &map);
    pxa27x_register_keypad(cpu->kp, map, 0xe0);

    /* MMC/SD host */
    pxa2xx_mmci_handlers(cpu->mmc, NULL, mst_irq[MMC_IRQ]);

    smc91c111_init(&nd_table[0], MST_ETH_PHYS, mst_irq[ETHERNET_IRQ]);

    mainstone_binfo.kernel_filename = kernel_filename;
    mainstone_binfo.kernel_cmdline = kernel_cmdline;
    mainstone_binfo.initrd_filename = initrd_filename;
    mainstone_binfo.board_id = arm_id;
    arm_load_kernel(cpu->env, &mainstone_binfo);
}
Ejemplo n.º 4
0
static void tosa_microdrive_attach(struct pxa2xx_state_s *cpu)
{
    struct pcmcia_card_s *md;
    int index;
    BlockDriverState *bs;

    index = drive_get_index(IF_IDE, 0, 0);
    if (index == -1)
        return;
    bs = drives_table[index].bdrv;
    if (bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
        md = dscm1xxxx_init(bs);
        pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
    }
}
Ejemplo n.º 5
0
static void bamboo_init(ram_addr_t ram_size,
                        const char *boot_device,
                        const char *kernel_filename,
                        const char *kernel_cmdline,
                        const char *initrd_filename,
                        const char *cpu_model)
{
    unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
    PCIBus *pcibus;
    CPUState *env;
    uint64_t elf_entry;
    uint64_t elf_lowaddr;
    target_ulong entry = 0;
    target_ulong loadaddr = 0;
    target_long kernel_size = 0;
    target_ulong initrd_base = 0;
    target_long initrd_size = 0;
    target_ulong dt_base = 0;
    void *fdt;
    int i;

    /* Setup CPU. */
    env = ppc440ep_init(&ram_size, &pcibus, pci_irq_nrs, 1);

    if (pcibus) {
        int unit_id = 0;

        /* Add virtio block devices. */
        while ((i = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
            pci_create_simple(pcibus, -1, "virtio-blk-pci");
            unit_id++;
        }

        /* Add virtio console devices */
        for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
            if (virtcon_hds[i]) {
                pci_create_simple(pcibus, -1, "virtio-console-pci");
            }
        }

        /* Register network interfaces. */
        for (i = 0; i < nb_nics; i++) {
            /* There are no PCI NICs on the Bamboo board, but there are
             * PCI slots, so we can pick whatever default model we want. */
            pci_nic_init(pcibus, &nd_table[i], -1, "e1000");
        }
    }

    /* Load kernel. */
    if (kernel_filename) {
        kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
        if (kernel_size < 0) {
            kernel_size = load_elf(kernel_filename, 0, &elf_entry, &elf_lowaddr,
                                   NULL);
            entry = elf_entry;
            loadaddr = elf_lowaddr;
        }
        /* XXX try again as binary */
        if (kernel_size < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    kernel_filename);
            exit(1);
        }
    }

    /* Load initrd. */
    if (initrd_filename) {
        initrd_base = kernel_size + loadaddr;
        initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                          ram_size - initrd_base);

        if (initrd_size < 0) {
            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
                    initrd_filename);
            exit(1);
        }
    }

    /* If we're loading a kernel directly, we must load the device tree too. */
    if (kernel_filename) {
        if (initrd_base)
            dt_base = initrd_base + initrd_size;
        else
            dt_base = kernel_size + loadaddr;

        fdt = bamboo_load_device_tree(dt_base, ram_size,
                                      initrd_base, initrd_size, kernel_cmdline);
        if (fdt == NULL) {
            fprintf(stderr, "couldn't load device tree\n");
            exit(1);
        }

        /* Set initial guest state. */
        env->gpr[1] = (16<<20) - 8;
        env->gpr[3] = dt_base;
        env->nip = entry;
        /* XXX we currently depend on KVM to create some initial TLB entries. */
    }

    if (kvm_enabled())
        kvmppc_init();
}
Ejemplo n.º 6
0
static void sun4c_hw_init(const struct hwdef *hwdef, int RAM_size,
                          const char *boot_device,
                          DisplayState *ds, const char *kernel_filename,
                          const char *kernel_cmdline,
                          const char *initrd_filename, const char *cpu_model)
{
    CPUState *env;
    unsigned int i;
    void *iommu, *espdma, *ledma, *main_esp, *nvram;
    qemu_irq *cpu_irqs, *slavio_irq, *espdma_irq, *ledma_irq;
    qemu_irq *esp_reset, *le_reset;
    unsigned long prom_offset, kernel_size;
    int ret;
    char buf[1024];
    BlockDriverState *fd[MAX_FD];
    int index;

    /* init CPU */
    if (!cpu_model)
        cpu_model = hwdef->default_cpu_model;

    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "qemu: Unable to find Sparc CPU definition\n");
        exit(1);
    }

    cpu_sparc_set_id(env, 0);

    qemu_register_reset(main_cpu_reset, env);
    register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
    cpu_irqs = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
    env->prom_addr = hwdef->slavio_base;

    /* allocate RAM */
    if ((uint64_t)RAM_size > hwdef->max_mem) {
        fprintf(stderr, "qemu: Too much memory for this machine: %d, maximum %d\n",
                (unsigned int)RAM_size / (1024 * 1024),
                (unsigned int)hwdef->max_mem / (1024 * 1024));
        exit(1);
    }
    cpu_register_physical_memory(0, RAM_size, 0);

    /* load boot prom */
    prom_offset = RAM_size + hwdef->vram_size;
    cpu_register_physical_memory(hwdef->slavio_base,
                                 (PROM_SIZE_MAX + TARGET_PAGE_SIZE - 1) &
                                 TARGET_PAGE_MASK,
                                 prom_offset | IO_MEM_ROM);

    if (bios_name == NULL)
        bios_name = PROM_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    ret = load_elf(buf, hwdef->slavio_base - PROM_VADDR, NULL, NULL, NULL);
    if (ret < 0 || ret > PROM_SIZE_MAX)
        ret = load_image(buf, phys_ram_base + prom_offset);
    if (ret < 0 || ret > PROM_SIZE_MAX) {
        fprintf(stderr, "qemu: could not load prom '%s'\n",
                buf);
        exit(1);
    }
    prom_offset += (ret + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK;

    /* set up devices */
    slavio_intctl = sun4c_intctl_init(hwdef->sun4c_intctl_base,
                                      &slavio_irq, cpu_irqs);

    iommu = iommu_init(hwdef->iommu_base, hwdef->iommu_version,
                       slavio_irq[hwdef->me_irq]);

    espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[hwdef->esp_irq],
                              iommu, &espdma_irq, &esp_reset);

    ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
                             slavio_irq[hwdef->le_irq], iommu, &ledma_irq,
                             &le_reset);

    if (graphic_depth != 8 && graphic_depth != 24) {
        fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
        exit (1);
    }
    tcx_init(ds, hwdef->tcx_base, phys_ram_base + RAM_size, RAM_size,
             hwdef->vram_size, graphic_width, graphic_height, graphic_depth);

    if (nd_table[0].model == NULL
        || strcmp(nd_table[0].model, "lance") == 0) {
        lance_init(&nd_table[0], hwdef->le_base, ledma, *ledma_irq, le_reset);
    } else if (strcmp(nd_table[0].model, "?") == 0) {
        fprintf(stderr, "qemu: Supported NICs: lance\n");
        exit (1);
    } else {
        fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
        exit (1);
    }

    nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0,
                        hwdef->nvram_size, 2);

    slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[hwdef->ms_kb_irq],
                              nographic);
    // Slavio TTYA (base+4, Linux ttyS0) is the first Qemu serial device
    // Slavio TTYB (base+0, Linux ttyS1) is the second Qemu serial device
    slavio_serial_init(hwdef->serial_base, slavio_irq[hwdef->ser_irq],
                       serial_hds[1], serial_hds[0]);

    if (hwdef->fd_base != (target_phys_addr_t)-1) {
        /* there is zero or one floppy drive */
        fd[1] = fd[0] = NULL;
        index = drive_get_index(IF_FLOPPY, 0, 0);
        if (index != -1)
            fd[0] = drives_table[index].bdrv;

        sun4m_fdctrl_init(slavio_irq[hwdef->fd_irq], hwdef->fd_base, fd);
    }

    if (drive_get_max_bus(IF_SCSI) > 0) {
        fprintf(stderr, "qemu: too many SCSI bus\n");
        exit(1);
    }

    main_esp = esp_init(hwdef->esp_base, espdma, *espdma_irq,
                        esp_reset);

    for (i = 0; i < ESP_MAX_DEVS; i++) {
        index = drive_get_index(IF_SCSI, 0, i);
        if (index == -1)
            continue;
        esp_scsi_attach(main_esp, drives_table[index].bdrv, i);
    }

    kernel_size = sun4m_load_kernel(kernel_filename, kernel_cmdline,
                                    initrd_filename);

    nvram_init((m48t59_t *)nvram, (uint8_t *)&nd_table[0].macaddr, kernel_cmdline,
               boot_device, RAM_size, kernel_size, graphic_width,
               graphic_height, graphic_depth, hwdef->machine_id, "Sun4c");
}
Ejemplo n.º 7
0
static void android_arm_init_(ram_addr_t ram_size,
    const char *boot_device,
    const char *kernel_filename,
    const char *kernel_cmdline,
    const char *initrd_filename,
    const char *cpu_model)
{
    CPUState *env;
    qemu_irq *cpu_pic;
    qemu_irq *goldfish_pic;
    int i;
    struct arm_boot_info  info;
    ram_addr_t ram_offset;
    DisplayState*  ds = get_displaystate();

    if (!cpu_model)
        cpu_model = "arm926";

    env = cpu_init(cpu_model);
    register_savevm( "cpu", 0, ARM_CPU_SAVE_VERSION, cpu_save, cpu_load, env );

    ram_offset = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);

    cpu_pic = arm_pic_init_cpu(env);
    goldfish_pic = goldfish_interrupt_init(0xff000000, cpu_pic[ARM_PIC_CPU_IRQ], cpu_pic[ARM_PIC_CPU_FIQ]);
    goldfish_device_init(goldfish_pic, 0xff010000, 0x7f0000, 10, 22);

    goldfish_device_bus_init(0xff001000, 1);

    goldfish_timer_and_rtc_init(0xff003000, 3);

    goldfish_tty_add(serial_hds[0], 0, 0xff002000, 4);
    for(i = 1; i < MAX_SERIAL_PORTS; i++) {
        //printf("android_arm_init serial %d %x\n", i, serial_hds[i]);
        if(serial_hds[i]) {
            goldfish_tty_add(serial_hds[i], i, 0, 0);
        }
    }

    for(i = 0; i < MAX_NICS; i++) {
        if (nd_table[i].vlan) {
            if (nd_table[i].model == NULL
                || strcmp(nd_table[i].model, "smc91c111") == 0) {
                struct goldfish_device *smc_device;
                smc_device = qemu_mallocz(sizeof(*smc_device));
                smc_device->name = "smc91x";
                smc_device->id = i;
                smc_device->size = 0x1000;
                smc_device->irq_count = 1;
                goldfish_add_device_no_io(smc_device);
                smc91c111_init(&nd_table[i], smc_device->base, goldfish_pic[smc_device->irq]);
            } else {
                fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
                exit (1);
            }
        }
    }

    goldfish_fb_init(ds, 0);
#ifdef HAS_AUDIO
    goldfish_audio_init(0xff004000, 0, audio_input_source);
#endif
    {
        int  idx = drive_get_index( IF_IDE, 0, 0 );
        if (idx >= 0)
            goldfish_mmc_init(0xff005000, 0, drives_table[idx].bdrv);
    }

    goldfish_memlog_init(0xff006000);

    if (android_hw->hw_battery)
        goldfish_battery_init();

    goldfish_sensor_init();

    goldfish_add_device_no_io(&event0_device);
    events_dev_init(event0_device.base, goldfish_pic[event0_device.irq]);

#ifdef CONFIG_NAND
    goldfish_add_device_no_io(&nand_device);
    nand_dev_init(nand_device.base);
#endif
#ifdef CONFIG_TRACE
    extern const char *trace_filename;
    /* Init trace device if either tracing, or memory checking is enabled. */
    if (trace_filename != NULL
#ifdef CONFIG_MEMCHECK
        || memcheck_enabled
#endif  // CONFIG_MEMCHECK
       ) {
        trace_dev_init();
    }
    if (trace_filename != NULL) {
        D( "Trace file name is set to %s\n", trace_filename );
    } else  {
        D("Trace file name is not set\n");
    }
#endif

#if TEST_SWITCH
    {
        void *sw;
        sw = goldfish_switch_add("test", NULL, NULL, 0);
        goldfish_switch_set_state(sw, 1);
        goldfish_switch_add("test2", switch_test_write, sw, 1);
    }
#endif

    memset(&info, 0, sizeof info);
    info.ram_size        = ram_size;
    info.kernel_filename = kernel_filename;
    info.kernel_cmdline  = kernel_cmdline;
    info.initrd_filename = initrd_filename;
    info.nb_cpus         = 1;
    info.board_id        = 1441;

    arm_load_kernel(env, &info);
}
Ejemplo n.º 8
0
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size, int vga_ram_size,
                             const char *boot_device, DisplayState *ds,
                             const char *kernel_filename,
                             const char *kernel_cmdline,
                             const char *initrd_filename,
                             const char *cpu_model)
{
    CPUState *env = NULL, *envs[MAX_CPUS];
    char buf[1024];
    qemu_irq *pic, **openpic_irqs;
    int unin_memory;
    int linux_boot, i;
    unsigned long bios_offset, vga_bios_offset;
    uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
    PCIBus *pci_bus;
    nvram_t nvram;
#if 0
    MacIONVRAMState *nvr;
    int nvram_mem_index;
#endif
    m48t59_t *m48t59;
    int vga_bios_size, bios_size;
    qemu_irq *dummy_irq;
    int pic_mem_index, dbdma_mem_index, cuda_mem_index;
    int ide_mem_index[2];
    int ppc_boot_device;
    int index;
    BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */
    if (cpu_model == NULL)
        cpu_model = "default";
    for (i = 0; i < smp_cpus; i++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "Unable to find PowerPC CPU definition\n");
            exit(1);
        }
        /* Set time-base frequency to 100 Mhz */
        cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
        env->osi_call = vga_osi_call;
#endif
        qemu_register_reset(&cpu_ppc_reset, env);
        register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
        envs[i] = env;
    }
    if (env->nip < 0xFFF80000) {
        /* Special test for PowerPC 601:
         * the boot vector is at 0xFFF00100, then we need a 1MB BIOS.
         * But the NVRAM is located at 0xFFF04000...
         */
        cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
    }

    /* allocate RAM */
    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);

    /* allocate and load BIOS */
    bios_offset = ram_size + vga_ram_size;
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    bios_size = load_image(buf, phys_ram_base + bios_offset);
    if (bios_size < 0 || bios_size > BIOS_SIZE) {
        cpu_abort(env, "qemu: could not load PowerPC bios '%s'\n", buf);
        exit(1);
    }
    bios_size = (bios_size + 0xfff) & ~0xfff;
    if (bios_size > 0x00080000) {
        /* As the NVRAM is located at 0xFFF04000, we cannot use 1 MB BIOSes */
        cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
    }
    cpu_register_physical_memory((uint32_t)(-bios_size),
                                 bios_size, bios_offset | IO_MEM_ROM);

    /* allocate and load VGA BIOS */
    vga_bios_offset = bios_offset + bios_size;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
    vga_bios_size = load_image(buf, phys_ram_base + vga_bios_offset + 8);
    if (vga_bios_size < 0) {
        /* if no bios is present, we can still work */
        fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n", buf);
        vga_bios_size = 0;
    } else {
        /* set a specific header (XXX: find real Apple format for NDRV
           drivers) */
        phys_ram_base[vga_bios_offset] = 'N';
        phys_ram_base[vga_bios_offset + 1] = 'D';
        phys_ram_base[vga_bios_offset + 2] = 'R';
        phys_ram_base[vga_bios_offset + 3] = 'V';
        cpu_to_be32w((uint32_t *)(phys_ram_base + vga_bios_offset + 4),
                     vga_bios_size);
        vga_bios_size += 8;
    }
    vga_bios_size = (vga_bios_size + 0xfff) & ~0xfff;

    if (linux_boot) {
        kernel_base = KERNEL_LOAD_ADDR;
        /* now we can load the kernel */
        kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);
        if (kernel_size < 0) {
            cpu_abort(env, "qemu: could not load kernel '%s'\n",
                      kernel_filename);
            exit(1);
        }
        /* load initrd */
        if (initrd_filename) {
            initrd_base = INITRD_LOAD_ADDR;
            initrd_size = load_image(initrd_filename,
                                     phys_ram_base + initrd_base);
            if (initrd_size < 0) {
                cpu_abort(env, "qemu: could not load initial ram disk '%s'\n",
                          initrd_filename);
                exit(1);
            }
        } else {
            initrd_base = 0;
            initrd_size = 0;
        }
        ppc_boot_device = 'm';
    } else {
        kernel_base = 0;
        kernel_size = 0;
        initrd_base = 0;
        initrd_size = 0;
        ppc_boot_device = '\0';
        /* We consider that NewWorld PowerMac never have any floppy drive
         * For now, OHW cannot boot from the network.
         */
        for (i = 0; boot_device[i] != '\0'; i++) {
            if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
                ppc_boot_device = boot_device[i];
                break;
            }
        }
        if (ppc_boot_device == '\0') {
            fprintf(stderr, "No valid boot device for Mac99 machine\n");
            exit(1);
        }
    }

    isa_mem_base = 0x80000000;

    /* Register 8 MB of ISA IO space */
    isa_mmio_init(0xf2000000, 0x00800000);

    /* UniN init */
    unin_memory = cpu_register_io_memory(0, unin_read, unin_write, NULL);
    cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);

    openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
    openpic_irqs[0] =
        qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    for (i = 0; i < smp_cpus; i++) {
        /* Mac99 IRQ connection between OpenPIC outputs pins
         * and PowerPC input pins
         */
        switch (PPC_INPUT(env)) {
        case PPC_FLAGS_INPUT_6xx:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
            break;
#if defined(TARGET_PPC64)
        case PPC_FLAGS_INPUT_970:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
            break;
#endif /* defined(TARGET_PPC64) */
        default:
            cpu_abort(env, "Bus model not supported on mac99 machine\n");
            exit(1);
        }
    }
    pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
    pci_bus = pci_pmac_init(pic);
    /* init basic PC hardware */
    pci_vga_init(pci_bus, ds, phys_ram_base + ram_size,
                 ram_size, vga_ram_size,
                 vga_bios_offset, vga_bios_size);

    /* XXX: suppress that */
    dummy_irq = i8259_init(NULL);

    /* XXX: use Mac Serial port */
    serial_init(0x3f8, dummy_irq[4], 115200, serial_hds[0]);
    for(i = 0; i < nb_nics; i++) {
        if (!nd_table[i].model)
            nd_table[i].model = "ne2k_pci";
        pci_nic_init(pci_bus, &nd_table[i], -1);
    }
    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }
    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
        index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
        if (index != -1)
            hd[i] = drives_table[index].bdrv;
        else
            hd[i] = NULL;
    }
#if 1
    ide_mem_index[0] = pmac_ide_init(&hd[0], pic[0x13]);
    ide_mem_index[1] = pmac_ide_init(&hd[2], pic[0x14]);
#else
    pci_cmd646_ide_init(pci_bus, &hd[0], 0);
#endif
    /* cuda also initialize ADB */
    cuda_init(&cuda_mem_index, pic[0x19]);

    adb_kbd_init(&adb_bus);
    adb_mouse_init(&adb_bus);

    dbdma_init(&dbdma_mem_index);

    macio_init(pci_bus, 0x0022, 0, pic_mem_index, dbdma_mem_index,
               cuda_mem_index, NULL, 2, ide_mem_index);

    if (usb_enabled) {
        usb_ohci_init_pci(pci_bus, 3, -1);
    }

    if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
        graphic_depth = 15;
#if 0 /* XXX: this is ugly but needed for now, or OHW won't boot */
    /* The NewWorld NVRAM is not located in the MacIO device */
    nvr = macio_nvram_init(&nvram_mem_index, 0x2000);
    pmac_format_nvram_partition(nvr, 0x2000);
    macio_nvram_map(nvr, 0xFFF04000);
    nvram.opaque = nvr;
    nvram.read_fn = &macio_nvram_read;
    nvram.write_fn = &macio_nvram_write;
#else
    m48t59 = m48t59_init(dummy_irq[8], 0xFFF04000, 0x0074, NVRAM_SIZE, 59);
    nvram.opaque = m48t59;
    nvram.read_fn = &m48t59_read;
    nvram.write_fn = &m48t59_write;
#endif
    PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "MAC99", ram_size,
                         ppc_boot_device, kernel_base, kernel_size,
                         kernel_cmdline,
                         initrd_base, initrd_size,
                         /* XXX: need an option to load a NVRAM image */
                         0,
                         graphic_width, graphic_height, graphic_depth);
    /* No PCI init: the BIOS will do it */

    /* Special port to get debug messages from Open-Firmware */
    register_ioport_write(0x0F00, 4, 1, &PPC_debug_write, NULL);
}
Ejemplo n.º 9
0
Archivo: mips_r4k.c Proyecto: CPFL/gxen
static
void mips_r4k_init (ram_addr_t ram_size, int vga_ram_size,
                    const char *boot_device,
                    const char *kernel_filename, const char *kernel_cmdline,
                    const char *initrd_filename, const char *cpu_model)
{
    char buf[1024];
    unsigned long bios_offset;
    int bios_size;
    CPUState *env;
    RTCState *rtc_state;
    int i;
    qemu_irq *i8259;
    int index;
    BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];

    /* init CPUs */
    if (cpu_model == NULL) {
#ifdef TARGET_MIPS64
        cpu_model = "R4000";
#else
        cpu_model = "24Kf";
#endif
    }
    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }
    qemu_register_reset(main_cpu_reset, env);

    /* allocate RAM */
    if (ram_size > (256 << 20)) {
        fprintf(stderr,
                "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n",
                ((unsigned int)ram_size / (1 << 20)));
        exit(1);
    }
    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);

    if (!mips_qemu_iomemtype) {
        mips_qemu_iomemtype = cpu_register_io_memory(0, mips_qemu_read,
                                                     mips_qemu_write, NULL);
    }
    cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype);

    /* Try to load a BIOS image. If this fails, we continue regardless,
       but initialize the hardware ourselves. When a kernel gets
       preloaded we also initialize the hardware, since the BIOS wasn't
       run. */
    bios_offset = ram_size + vga_ram_size;
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    bios_size = load_image(buf, phys_ram_base + bios_offset);
    if ((bios_size > 0) && (bios_size <= BIOS_SIZE)) {
	cpu_register_physical_memory(0x1fc00000,
				     BIOS_SIZE, bios_offset | IO_MEM_ROM);
    } else if ((index = drive_get_index(IF_PFLASH, 0, 0)) > -1) {
        uint32_t mips_rom = 0x00400000;
        cpu_register_physical_memory(0x1fc00000, mips_rom,
	                     qemu_ram_alloc(mips_rom) | IO_MEM_ROM);
        if (!pflash_cfi01_register(0x1fc00000, qemu_ram_alloc(mips_rom),
            drives_table[index].bdrv, sector_len, mips_rom / sector_len,
            4, 0, 0, 0, 0)) {
            fprintf(stderr, "qemu: Error registering flash memory.\n");
	}
    }
    else {
	/* not fatal */
        fprintf(stderr, "qemu: Warning, could not load MIPS bios '%s'\n",
		buf);
    }

    if (kernel_filename) {
        loaderparams.ram_size = ram_size;
        loaderparams.kernel_filename = kernel_filename;
        loaderparams.kernel_cmdline = kernel_cmdline;
        loaderparams.initrd_filename = initrd_filename;
        load_kernel (env);
    }

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(env);
    cpu_mips_clock_init(env);

    /* The PIC is attached to the MIPS CPU INT0 pin */
    i8259 = i8259_init(env->irq[2]);

    rtc_state = rtc_init(0x70, i8259[8], 2000);

    /* Register 64 KB of ISA IO space at 0x14000000 */
    isa_mmio_init(0x14000000, 0x00010000);
    isa_mem_base = 0x10000000;

    pit = pit_init(0x40, i8259[0]);

    for(i = 0; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
            serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
                        serial_hds[i]);
        }
    }

    isa_vga_init(phys_ram_base + ram_size, ram_size,
                 vga_ram_size);

    if (nd_table[0].vlan)
        isa_ne2000_init(0x300, i8259[9], &nd_table[0]);

    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }

    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
        index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
        if (index != -1)
            hd[i] = drives_table[index].bdrv;
        else
            hd[i] = NULL;
    }

    for(i = 0; i < MAX_IDE_BUS; i++)
        isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
                     hd[MAX_IDE_DEVS * i],
		     hd[MAX_IDE_DEVS * i + 1]);

    i8042_init(i8259[1], i8259[12], 0x60);
}
Ejemplo n.º 10
0
static int blk_init(struct XenDevice *xendev)
{
    struct XenBlkDev *blkdev = container_of(xendev, struct XenBlkDev, xendev);
    int mode, qflags, have_barriers, info = 0;
    char *h = NULL;

    /* read xenstore entries */
    if (blkdev->params == NULL) {
	blkdev->params = xenstore_read_be_str(&blkdev->xendev, "params");
        if (blkdev->params != NULL)
            h = strchr(blkdev->params, ':');
	if (h != NULL) {
	    blkdev->fileproto = blkdev->params;
	    blkdev->filename  = h+1;
	    *h = 0;
	} else {
	    blkdev->fileproto = "<unset>";
	    blkdev->filename  = blkdev->params;
	}
    }
    if (!strcmp("aio", blkdev->fileproto))
        blkdev->fileproto = "raw";
    if (blkdev->mode == NULL)
	blkdev->mode = xenstore_read_be_str(&blkdev->xendev, "mode");
    if (blkdev->type == NULL)
	blkdev->type = xenstore_read_be_str(&blkdev->xendev, "type");
    if (blkdev->dev == NULL)
	blkdev->dev = xenstore_read_be_str(&blkdev->xendev, "dev");
    if (blkdev->devtype == NULL)
	blkdev->devtype = xenstore_read_be_str(&blkdev->xendev, "device-type");

    /* do we have all we need? */
    if (blkdev->params == NULL ||
	blkdev->mode == NULL   ||
	blkdev->type == NULL   ||
	blkdev->dev == NULL)
	return -1;

    /* read-only ? */
    qflags = BDRV_O_NOCACHE;
    if (strcmp(blkdev->mode, "w") == 0) {
	mode   = O_RDWR;
	qflags |= BDRV_O_RDWR;
    } else {
	mode   = O_RDONLY;
	qflags |= BDRV_O_RDONLY;
	info  |= VDISK_READONLY;
    }

    /* cdrom ? */
    if (blkdev->devtype && !strcmp(blkdev->devtype, "cdrom"))
	info  |= VDISK_CDROM;

    /* init qemu block driver */
    blkdev->index = (blkdev->xendev.dev - 202 * 256) / 16;
    blkdev->index = drive_get_index(IF_XEN, 0, blkdev->index);
    if (blkdev->index == -1) {
        /* setup via xenbus -> create new block driver instance */
        xen_be_printf(&blkdev->xendev, 2, "create new bdrv (xenbus setup)\n");
	blkdev->bs = bdrv_new(blkdev->dev);
	if (blkdev->bs) {
	    if (bdrv_open2(blkdev->bs, blkdev->filename, qflags,
                           bdrv_find_format(blkdev->fileproto)) != 0) {
		bdrv_delete(blkdev->bs);
		blkdev->bs = NULL;
	    }
	}
	if (!blkdev->bs)
	    return -1;
    } else {
        /* setup via qemu cmdline -> already setup for us */
        xen_be_printf(&blkdev->xendev, 2, "get configured bdrv (cmdline setup)\n");
	blkdev->bs = drives_table[blkdev->index].bdrv;
    }
    blkdev->file_blk  = BLOCK_SIZE;
    blkdev->file_size = bdrv_getlength(blkdev->bs);
    if (blkdev->file_size < 0) {
        xen_be_printf(&blkdev->xendev, 1, "bdrv_getlength: %d (%s) | drv %s\n",
                      (int)blkdev->file_size, strerror(-blkdev->file_size),
                      blkdev->bs->drv ? blkdev->bs->drv->format_name : "-");
	blkdev->file_size = 0;
    }
    have_barriers = blkdev->bs->drv && blkdev->bs->drv->bdrv_flush ? 1 : 0;

    xen_be_printf(xendev, 1, "type \"%s\", fileproto \"%s\", filename \"%s\","
		  " size %" PRId64 " (%" PRId64 " MB)\n",
		  blkdev->type, blkdev->fileproto, blkdev->filename,
		  blkdev->file_size, blkdev->file_size >> 20);

    /* fill info */
    xenstore_write_be_int(&blkdev->xendev, "feature-barrier", have_barriers);
    xenstore_write_be_int(&blkdev->xendev, "info",            info);
    xenstore_write_be_int(&blkdev->xendev, "sector-size",     blkdev->file_blk);
    xenstore_write_be_int(&blkdev->xendev, "sectors",
			  blkdev->file_size / blkdev->file_blk);
    return 0;
}
Ejemplo n.º 11
0
Archivo: sun4m.c Proyecto: anhkgg/temu
static void sun4d_hw_init(const struct sun4d_hwdef *hwdef, int RAM_size,
                          const char *boot_device,
                          DisplayState *ds, const char *kernel_filename,
                          const char *kernel_cmdline,
                          const char *initrd_filename, const char *cpu_model)
{
    CPUState *env, *envs[MAX_CPUS];
    unsigned int i;
    void *iounits[MAX_IOUNITS], *espdma, *ledma, *main_esp, *nvram, *sbi;
    qemu_irq *cpu_irqs[MAX_CPUS], *sbi_irq, *sbi_cpu_irq,
        *espdma_irq, *ledma_irq;
    qemu_irq *esp_reset, *le_reset;
    unsigned long prom_offset, kernel_size;
    int ret;
    char buf[1024];
    int index;

    /* init CPUs */
    if (!cpu_model)
        cpu_model = hwdef->default_cpu_model;

    for (i = 0; i < smp_cpus; i++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "qemu: Unable to find Sparc CPU definition\n");
            exit(1);
        }
        cpu_sparc_set_id(env, i);
        envs[i] = env;
        if (i == 0) {
            qemu_register_reset(main_cpu_reset, env);
        } else {
            qemu_register_reset(secondary_cpu_reset, env);
            env->halted = 1;
        }
        register_savevm("cpu", i, 3, cpu_save, cpu_load, env);
        cpu_irqs[i] = qemu_allocate_irqs(cpu_set_irq, envs[i], MAX_PILS);
        env->prom_addr = hwdef->slavio_base;
    }

    for (i = smp_cpus; i < MAX_CPUS; i++)
        cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);

    /* allocate RAM */
    if ((uint64_t)RAM_size > hwdef->max_mem) {
        fprintf(stderr, "qemu: Too much memory for this machine: %d, maximum %d\n",
                (unsigned int)RAM_size / (1024 * 1024),
                (unsigned int)(hwdef->max_mem / (1024 * 1024)));
        exit(1);
    }
    cpu_register_physical_memory(0, RAM_size, 0);

    /* load boot prom */
    prom_offset = RAM_size + hwdef->vram_size;
    cpu_register_physical_memory(hwdef->slavio_base,
                                 (PROM_SIZE_MAX + TARGET_PAGE_SIZE - 1) &
                                 TARGET_PAGE_MASK,
                                 prom_offset | IO_MEM_ROM);

    if (bios_name == NULL)
        bios_name = PROM_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    ret = load_elf(buf, hwdef->slavio_base - PROM_VADDR, NULL, NULL, NULL);
    if (ret < 0 || ret > PROM_SIZE_MAX)
        ret = load_image(buf, phys_ram_base + prom_offset);
    if (ret < 0 || ret > PROM_SIZE_MAX) {
        fprintf(stderr, "qemu: could not load prom '%s'\n",
                buf);
        exit(1);
    }

    /* set up devices */
    sbi = sbi_init(hwdef->sbi_base, &sbi_irq, &sbi_cpu_irq, cpu_irqs);

    for (i = 0; i < MAX_IOUNITS; i++)
        if (hwdef->iounit_bases[i] != (target_phys_addr_t)-1)
            iounits[i] = iommu_init(hwdef->iounit_bases[i],
                                    hwdef->iounit_version,
                                    sbi_irq[hwdef->me_irq]);

    espdma = sparc32_dma_init(hwdef->espdma_base, sbi_irq[hwdef->esp_irq],
                              iounits[0], &espdma_irq, &esp_reset);

    ledma = sparc32_dma_init(hwdef->ledma_base, sbi_irq[hwdef->le_irq],
                             iounits[0], &ledma_irq, &le_reset);

    if (graphic_depth != 8 && graphic_depth != 24) {
        fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
        exit (1);
    }
    tcx_init(ds, hwdef->tcx_base, phys_ram_base + RAM_size, RAM_size,
             hwdef->vram_size, graphic_width, graphic_height, graphic_depth);

    if (nd_table[0].model == NULL
        || strcmp(nd_table[0].model, "lance") == 0) {
        lance_init(&nd_table[0], hwdef->le_base, ledma, *ledma_irq, le_reset);
    } else if (strcmp(nd_table[0].model, "?") == 0) {
        fprintf(stderr, "qemu: Supported NICs: lance\n");
        exit (1);
    } else {
        fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
        exit (1);
    }

    nvram = m48t59_init(sbi_irq[0], hwdef->nvram_base, 0,
                        hwdef->nvram_size, 8);

    slavio_timer_init_all(hwdef->counter_base, sbi_irq[hwdef->clock1_irq],
                          sbi_cpu_irq, smp_cpus);

    slavio_serial_ms_kbd_init(hwdef->ms_kb_base, sbi_irq[hwdef->ms_kb_irq],
                              nographic);
    // Slavio TTYA (base+4, Linux ttyS0) is the first Qemu serial device
    // Slavio TTYB (base+0, Linux ttyS1) is the second Qemu serial device
    slavio_serial_init(hwdef->serial_base, sbi_irq[hwdef->ser_irq],
                       serial_hds[1], serial_hds[0]);

    if (drive_get_max_bus(IF_SCSI) > 0) {
        fprintf(stderr, "qemu: too many SCSI bus\n");
        exit(1);
    }

    main_esp = esp_init(hwdef->esp_base, espdma, *espdma_irq,
                        esp_reset);

    for (i = 0; i < ESP_MAX_DEVS; i++) {
        index = drive_get_index(IF_SCSI, 0, i);
        if (index == -1)
            continue;
        esp_scsi_attach(main_esp, drives_table[index].bdrv, i);
    }

    kernel_size = sun4m_load_kernel(kernel_filename, kernel_cmdline,
                                    initrd_filename);

    nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, kernel_cmdline,
               boot_device, RAM_size, kernel_size, graphic_width,
               graphic_height, graphic_depth, hwdef->machine_id, "Sun4d");
}
Ejemplo n.º 12
0
static
void bareetraxfs_init (ram_addr_t ram_size, int vga_ram_size,
                       const char *boot_device,
                       const char *kernel_filename, const char *kernel_cmdline,
                       const char *initrd_filename, const char *cpu_model)
{
    CPUState *env;
    struct etraxfs_pic *pic;
    void *etraxfs_dmac;
    struct etraxfs_dma_client *eth[2] = {NULL, NULL};
    int kernel_size;
    int i;
    ram_addr_t phys_ram;
    ram_addr_t phys_flash;
    ram_addr_t phys_intmem;

    /* init CPUs */
    if (cpu_model == NULL) {
        cpu_model = "crisv32";
    }
    env = cpu_init(cpu_model);
    qemu_register_reset(main_cpu_reset, env);

    /* allocate RAM */
    phys_ram = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(0x40000000, ram_size, phys_ram | IO_MEM_RAM);

    /* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the 
       internal memory.  */
    phys_intmem = qemu_ram_alloc(INTMEM_SIZE);
    cpu_register_physical_memory(0x38000000, INTMEM_SIZE,
                                 phys_intmem | IO_MEM_RAM);


    phys_flash = qemu_ram_alloc(FLASH_SIZE);
    i = drive_get_index(IF_PFLASH, 0, 0);
    pflash_cfi02_register(0x0, phys_flash,
                          i != -1 ? drives_table[i].bdrv : NULL, (64 * 1024),
                          FLASH_SIZE >> 16,
                          1, 2, 0x0000, 0x0000, 0x0000, 0x0000,
                          0x555, 0x2aa);
    pic = etraxfs_pic_init(env, 0x3001c000);
    etraxfs_dmac = etraxfs_dmac_init(env, 0x30000000, 10);
    for (i = 0; i < 10; i++) {
        /* On ETRAX, odd numbered channels are inputs.  */
        etraxfs_dmac_connect(etraxfs_dmac, i, pic->irq + 7 + i, i & 1);
    }

    /* Add the two ethernet blocks.  */
    eth[0] = etraxfs_eth_init(&nd_table[0], env, pic->irq + 25, 0x30034000, 1);
    if (nb_nics > 1)
        eth[1] = etraxfs_eth_init(&nd_table[1], env,
                                  pic->irq + 26, 0x30036000, 2);

    /* The DMA Connector block is missing, hardwire things for now.  */
    etraxfs_dmac_connect_client(etraxfs_dmac, 0, eth[0]);
    etraxfs_dmac_connect_client(etraxfs_dmac, 1, eth[0] + 1);
    if (eth[1]) {
        etraxfs_dmac_connect_client(etraxfs_dmac, 6, eth[1]);
        etraxfs_dmac_connect_client(etraxfs_dmac, 7, eth[1] + 1);
    }

    /* 2 timers.  */
    etraxfs_timer_init(env, pic->irq + 0x1b, pic->nmi + 1, 0x3001e000);
    etraxfs_timer_init(env, pic->irq + 0x1b, pic->nmi + 1, 0x3005e000);

    for (i = 0; i < 4; i++) {
        if (serial_hds[i]) {
            etraxfs_ser_init(env, pic->irq + 0x14 + i,
                             serial_hds[i], 0x30026000 + i * 0x2000);
        }
    }

    if (kernel_filename) {
        uint64_t entry, high;
        int kcmdline_len;

        /* Boots a kernel elf binary, os/linux-2.6/vmlinux from the axis 
           devboard SDK.  */
        kernel_size = load_elf(kernel_filename, -0x80000000LL,
                               &entry, NULL, &high);
        bootstrap_pc = entry;
        if (kernel_size < 0) {
            /* Takes a kimage from the axis devboard SDK.  */
            kernel_size = load_image_targphys(kernel_filename, 0x40004000,
                                              ram_size);
            bootstrap_pc = 0x40004000;
            env->regs[9] = 0x40004000 + kernel_size;
        }
        env->regs[8] = 0x56902387; /* RAM init magic.  */

        if (kernel_cmdline && (kcmdline_len = strlen(kernel_cmdline))) {
            if (kcmdline_len > 256) {
                fprintf(stderr, "Too long CRIS kernel cmdline (max 256)\n");
                exit(1);
            }
            pstrcpy_targphys(high, 256, kernel_cmdline);
            /* Let the kernel know we are modifying the cmdline.  */
            env->regs[10] = 0x87109563;
            env->regs[11] = high;
        }
    }
    env->pc = bootstrap_pc;

    printf ("pc =%x\n", env->pc);
    printf ("ram size =%ld\n", ram_size);
}
Ejemplo n.º 13
0
static void
petalogix_s3adsp1800_init(ram_addr_t ram_size,
                          const char *boot_device,
                          const char *kernel_filename,
                          const char *kernel_cmdline,
                          const char *initrd_filename, const char *cpu_model)
{
    DeviceState *dev;
    CPUState *env;
    int kernel_size;
    int i;
    target_phys_addr_t ddr_base = 0x90000000;
    ram_addr_t phys_lmb_bram;
    ram_addr_t phys_ram;
    ram_addr_t phys_flash;
    qemu_irq irq[32], *cpu_irq;

    /* init CPUs */
    if (cpu_model == NULL) {
        cpu_model = "microblaze";
    }
    env = cpu_init(cpu_model);

    env->pvr.regs[10] = 0x0c000000; /* spartan 3a dsp family.  */
    qemu_register_reset(main_cpu_reset, env);

    /* Attach emulated BRAM through the LMB.  */
    phys_lmb_bram = qemu_ram_alloc(LMB_BRAM_SIZE);
    cpu_register_physical_memory(0x00000000, LMB_BRAM_SIZE,
                                 phys_lmb_bram | IO_MEM_RAM);

    phys_ram = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(ddr_base, ram_size, phys_ram | IO_MEM_RAM);

    phys_flash = qemu_ram_alloc(FLASH_SIZE);
    i = drive_get_index(IF_PFLASH, 0, 0);
    pflash_cfi02_register(0xa0000000, phys_flash,
                          i != -1 ? drives_table[i].bdrv : NULL, (64 * 1024),
                          FLASH_SIZE >> 16,
                          1, 1, 0x0000, 0x0000, 0x0000, 0x0000,
                          0x555, 0x2aa);

    cpu_irq = microblaze_pic_init_cpu(env);
    dev = xilinx_intc_create(0x81800000, cpu_irq[0], 2);
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    sysbus_create_simple("xilinx,uartlite", 0x84000000, irq[3]);
    /* 2 timers at irq 2 @ 62 Mhz.  */
    xilinx_timer_create(0x83c00000, irq[0], 2, 62 * 1000000);
    xilinx_ethlite_create(&nd_table[0], 0x81000000, irq[1], 0, 0);

    if (kernel_filename) {
        uint64_t entry, low, high;
        int kcmdline_len;
        uint32_t base32;

        /* Boots a kernel elf binary.  */
        kernel_size = load_elf(kernel_filename, 0,
                               &entry, &low, &high);
        base32 = entry;
        if (base32 == 0xc0000000) {
            kernel_size = load_elf(kernel_filename, -0x30000000LL,
                                   &entry, NULL, NULL);
        }
        /* Always boot into physical ram.  */
        bootstrap_pc = ddr_base + (entry & 0x0fffffff);
        if (kernel_size < 0) {
            /* If we failed loading ELF's try a raw image.  */
            kernel_size = load_image_targphys(kernel_filename, ddr_base,
                                              ram_size);
            bootstrap_pc = ddr_base;
        }

        env->regs[5] = ddr_base + kernel_size;
        if (kernel_cmdline && (kcmdline_len = strlen(kernel_cmdline))) {
            pstrcpy_targphys(env->regs[5], 256, kernel_cmdline);
        }
        env->regs[6] = 0;
        /* Provide a device-tree.  */
        env->regs[7] = ddr_base + kernel_size + 256;
        petalogix_load_device_tree(env->regs[7], ram_size,
                                   env->regs[6], 0,
                                   kernel_cmdline);
    }

    env->sregs[SR_PC] = bootstrap_pc;
}
static void xen_init_pv(ram_addr_t ram_size, int vga_ram_size,
			const char *boot_device,
			const char *kernel_filename,
			const char *kernel_cmdline,
			const char *initrd_filename,
			const char *cpu_model)
{
    CPUState *env;
    int i, index;

    /* Initialize a dummy CPU */
    if (cpu_model == NULL) {
#ifdef TARGET_X86_64
        cpu_model = "qemu64";
#else
        cpu_model = "qemu32";
#endif
    }
    env = cpu_init(cpu_model);
    env->halted = 1;

    /* Initialize backend core & drivers */
    if (xen_be_init() != 0) {
        fprintf(stderr, "%s: xen backend core setup failed\n", __FUNCTION__);
        exit(1);
    }

    switch (xen_mode) {
    case XEN_ATTACH:
        /* nothing to do, xend handles everything */
        break;
    case XEN_CREATE:
        if (xen_domain_build_pv(kernel_filename, initrd_filename,
                                kernel_cmdline) < 0) {
            fprintf(stderr, "xen pv domain creation failed\n");
            exit(1);
        }
        break;
    case XEN_EMULATE:
        fprintf(stderr, "xen emulation not implemented (yet)\n");
        exit(1);
        break;
    }

    xen_be_register("console", &xen_console_ops);
    xen_be_register("vkbd", &xen_kbdmouse_ops);
    xen_be_register("vfb", &xen_framebuffer_ops);
    xen_be_register("qdisk", &xen_blkdev_ops);
    xen_be_register("qnic", &xen_netdev_ops);

    /* configure framebuffer */
    if (xenfb_enabled) {
        xen_config_dev_vfb(0, "vnc");
        xen_config_dev_vkbd(0);
    }

    /* configure disks */
    for (i = 0; i < 16; i++) {
        index = drive_get_index(IF_XEN, 0, i);
        if (index == -1)
            continue;
        xen_config_dev_blk(drives_table + index);
    }

    /* configure nics */
    for (i = 0; i < nb_nics; i++) {
        if (!nd_table[i].model || 0 != strcmp(nd_table[i].model, "xen"))
            continue;
        xen_config_dev_nic(nd_table + i);
    }

    /* config cleanup hook */
    atexit(xen_config_cleanup);

    /* setup framebuffer */
    xen_init_display(xen_domid);
}
Ejemplo n.º 15
0
static void sun4uv_init(ram_addr_t RAM_size, int vga_ram_size,
                        const char *boot_devices,
                        const char *kernel_filename, const char *kernel_cmdline,
                        const char *initrd_filename, const char *cpu_model,
                        const struct hwdef *hwdef)
{
    CPUState *env;
    char buf[1024];
    m48t59_t *nvram;
    int ret, linux_boot;
    unsigned int i;
    ram_addr_t ram_offset, prom_offset, vga_ram_offset;
    long initrd_size, kernel_size;
    PCIBus *pci_bus, *pci_bus2, *pci_bus3;
    QEMUBH *bh;
    qemu_irq *irq;
    int drive_index;
    BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
    BlockDriverState *fd[MAX_FD];
    void *fw_cfg;
    ResetData *reset_info;

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */
    if (!cpu_model)
        cpu_model = hwdef->default_cpu_model;

    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to find Sparc CPU definition\n");
        exit(1);
    }
    bh = qemu_bh_new(tick_irq, env);
    env->tick = ptimer_init(bh);
    ptimer_set_period(env->tick, 1ULL);

    bh = qemu_bh_new(stick_irq, env);
    env->stick = ptimer_init(bh);
    ptimer_set_period(env->stick, 1ULL);

    bh = qemu_bh_new(hstick_irq, env);
    env->hstick = ptimer_init(bh);
    ptimer_set_period(env->hstick, 1ULL);

    reset_info = qemu_mallocz(sizeof(ResetData));
    reset_info->env = env;
    reset_info->reset_addr = hwdef->prom_addr + 0x40ULL;
    qemu_register_reset(main_cpu_reset, reset_info);
    main_cpu_reset(reset_info);
    // Override warm reset address with cold start address
    env->pc = hwdef->prom_addr + 0x20ULL;
    env->npc = env->pc + 4;

    /* allocate RAM */
    ram_offset = qemu_ram_alloc(RAM_size);
    cpu_register_physical_memory(0, RAM_size, ram_offset);

    prom_offset = qemu_ram_alloc(PROM_SIZE_MAX);
    cpu_register_physical_memory(hwdef->prom_addr,
                                 (PROM_SIZE_MAX + TARGET_PAGE_SIZE) &
                                 TARGET_PAGE_MASK,
                                 prom_offset | IO_MEM_ROM);

    if (bios_name == NULL)
        bios_name = PROM_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    ret = load_elf(buf, hwdef->prom_addr - PROM_VADDR, NULL, NULL, NULL);
    if (ret < 0) {
        ret = load_image_targphys(buf, hwdef->prom_addr,
                                  (PROM_SIZE_MAX + TARGET_PAGE_SIZE) &
                                  TARGET_PAGE_MASK);
        if (ret < 0) {
            fprintf(stderr, "qemu: could not load prom '%s'\n",
                    buf);
            exit(1);
        }
    }

    kernel_size = 0;
    initrd_size = 0;
    if (linux_boot) {
        /* XXX: put correct offset */
        kernel_size = load_elf(kernel_filename, 0, NULL, NULL, NULL);
        if (kernel_size < 0)
            kernel_size = load_aout(kernel_filename, KERNEL_LOAD_ADDR,
                                    ram_size - KERNEL_LOAD_ADDR);
        if (kernel_size < 0)
            kernel_size = load_image_targphys(kernel_filename,
                                              KERNEL_LOAD_ADDR,
                                              ram_size - KERNEL_LOAD_ADDR);
        if (kernel_size < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    kernel_filename);
            exit(1);
        }

        /* load initrd */
        if (initrd_filename) {
            initrd_size = load_image_targphys(initrd_filename,
                                              INITRD_LOAD_ADDR,
                                              ram_size - INITRD_LOAD_ADDR);
            if (initrd_size < 0) {
                fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
                        initrd_filename);
                exit(1);
            }
        }
        if (initrd_size > 0) {
            for (i = 0; i < 64 * TARGET_PAGE_SIZE; i += TARGET_PAGE_SIZE) {
                if (ldl_phys(KERNEL_LOAD_ADDR + i) == 0x48647253) { // HdrS
                    stl_phys(KERNEL_LOAD_ADDR + i + 16, INITRD_LOAD_ADDR);
                    stl_phys(KERNEL_LOAD_ADDR + i + 20, initrd_size);
                    break;
                }
            }
        }
    }
    pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, NULL, &pci_bus2,
                           &pci_bus3);
    isa_mem_base = VGA_BASE;
    vga_ram_offset = qemu_ram_alloc(vga_ram_size);
    pci_vga_init(pci_bus, phys_ram_base + vga_ram_offset,
                 vga_ram_offset, vga_ram_size,
                 0, 0);

    // XXX Should be pci_bus3
    pci_ebus_init(pci_bus, -1);

    i = 0;
    if (hwdef->console_serial_base) {
        serial_mm_init(hwdef->console_serial_base, 0, NULL, 115200,
                       serial_hds[i], 1);
        i++;
    }
    for(; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
            serial_init(serial_io[i], NULL/*serial_irq[i]*/, 115200,
                        serial_hds[i]);
        }
    }

    for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
        if (parallel_hds[i]) {
            parallel_init(parallel_io[i], NULL/*parallel_irq[i]*/,
                          parallel_hds[i]);
        }
    }

    for(i = 0; i < nb_nics; i++)
        pci_nic_init(pci_bus, &nd_table[i], -1, "ne2k_pci");

    irq = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }
    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
        drive_index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS,
                                      i % MAX_IDE_DEVS);
       if (drive_index != -1)
           hd[i] = drives_table[drive_index].bdrv;
       else
           hd[i] = NULL;
    }

    pci_cmd646_ide_init(pci_bus, hd, 1);

    /* FIXME: wire up interrupts.  */
    i8042_init(NULL/*1*/, NULL/*12*/, 0x60);
    for(i = 0; i < MAX_FD; i++) {
        drive_index = drive_get_index(IF_FLOPPY, 0, i);
       if (drive_index != -1)
           fd[i] = drives_table[drive_index].bdrv;
       else
           fd[i] = NULL;
    }
    floppy_controller = fdctrl_init(NULL/*6*/, 2, 0, 0x3f0, fd);
    nvram = m48t59_init(NULL/*8*/, 0, 0x0074, NVRAM_SIZE, 59);
    sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", RAM_size, boot_devices,
                           KERNEL_LOAD_ADDR, kernel_size,
                           kernel_cmdline,
                           INITRD_LOAD_ADDR, initrd_size,
                           /* XXX: need an option to load a NVRAM image */
                           0,
                           graphic_width, graphic_height, graphic_depth,
                           (uint8_t *)&nd_table[0].macaddr);

    fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
    fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
}
Ejemplo n.º 16
0
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size,
                             const char *boot_device,
                             const char *kernel_filename,
                             const char *kernel_cmdline,
                             const char *initrd_filename,
                             const char *cpu_model)
{
    CPUState *env = NULL, *envs[MAX_CPUS];
    char *filename;
    qemu_irq *pic, **openpic_irqs;
    int unin_memory;
    int linux_boot, i;
    ram_addr_t ram_offset, bios_offset, vga_bios_offset;
    uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
    PCIBus *pci_bus;
    MacIONVRAMState *nvr;
    int nvram_mem_index;
    int vga_bios_size, bios_size;
    qemu_irq *dummy_irq;
    int pic_mem_index, dbdma_mem_index, cuda_mem_index, escc_mem_index;
    int ppc_boot_device;
    int index;
    BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
    void *fw_cfg;
    void *dbdma;
    uint8_t *vga_bios_ptr;

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */
    if (cpu_model == NULL)
        cpu_model = "G4";
    for (i = 0; i < smp_cpus; i++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "Unable to find PowerPC CPU definition\n");
            exit(1);
        }
        /* Set time-base frequency to 100 Mhz */
        cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
        env->osi_call = vga_osi_call;
#endif
        qemu_register_reset(&cpu_ppc_reset, env);
        envs[i] = env;
    }

    /* allocate RAM */
    ram_offset = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(0, ram_size, ram_offset);

    /* allocate and load BIOS */
    bios_offset = qemu_ram_alloc(BIOS_SIZE);
    if (bios_name == NULL)
        bios_name = PROM_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    cpu_register_physical_memory(PROM_ADDR, BIOS_SIZE, bios_offset | IO_MEM_ROM);

    /* Load OpenBIOS (ELF) */
    if (filename) {
        bios_size = load_elf(filename, 0, NULL, NULL, NULL);
        qemu_free(filename);
    } else {
        bios_size = -1;
    }
    if (bios_size < 0 || bios_size > BIOS_SIZE) {
        hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
        exit(1);
    }

    /* allocate and load VGA BIOS */
    vga_bios_offset = qemu_ram_alloc(VGA_BIOS_SIZE);
    vga_bios_ptr = qemu_get_ram_ptr(vga_bios_offset);
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, VGABIOS_FILENAME);
    if (filename) {
        vga_bios_size = load_image(filename, vga_bios_ptr + 8);
        qemu_free(filename);
    } else {
        vga_bios_size = -1;
    }
    if (vga_bios_size < 0) {
        /* if no bios is present, we can still work */
        fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n",
                VGABIOS_FILENAME);
        vga_bios_size = 0;
    } else {
        /* set a specific header (XXX: find real Apple format for NDRV
           drivers) */
        vga_bios_ptr[0] = 'N';
        vga_bios_ptr[1] = 'D';
        vga_bios_ptr[2] = 'R';
        vga_bios_ptr[3] = 'V';
        cpu_to_be32w((uint32_t *)(vga_bios_ptr + 4), vga_bios_size);
        vga_bios_size += 8;
    }

    if (linux_boot) {
        uint64_t lowaddr = 0;
        kernel_base = KERNEL_LOAD_ADDR;

        /* Now we can load the kernel. The first step tries to load the kernel
           supposing PhysAddr = 0x00000000. If that was wrong the kernel is
           loaded again, the new PhysAddr being computed from lowaddr. */
        kernel_size = load_elf(kernel_filename, kernel_base, NULL, &lowaddr, NULL);
        if (kernel_size > 0 && lowaddr != KERNEL_LOAD_ADDR) {
            kernel_size = load_elf(kernel_filename, (2 * kernel_base) - lowaddr,
                                   NULL, NULL, NULL);
        }
        if (kernel_size < 0)
            kernel_size = load_aout(kernel_filename, kernel_base,
                                    ram_size - kernel_base);
        if (kernel_size < 0)
            kernel_size = load_image_targphys(kernel_filename,
                                              kernel_base,
                                              ram_size - kernel_base);
        if (kernel_size < 0) {
            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
            exit(1);
        }
        /* load initrd */
        if (initrd_filename) {
            initrd_base = INITRD_LOAD_ADDR;
            initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                              ram_size - initrd_base);
            if (initrd_size < 0) {
                hw_error("qemu: could not load initial ram disk '%s'\n",
                         initrd_filename);
                exit(1);
            }
        } else {
            initrd_base = 0;
            initrd_size = 0;
        }
        ppc_boot_device = 'm';
    } else {
        kernel_base = 0;
        kernel_size = 0;
        initrd_base = 0;
        initrd_size = 0;
        ppc_boot_device = '\0';
        /* We consider that NewWorld PowerMac never have any floppy drive
         * For now, OHW cannot boot from the network.
         */
        for (i = 0; boot_device[i] != '\0'; i++) {
            if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
                ppc_boot_device = boot_device[i];
                break;
            }
        }
        if (ppc_boot_device == '\0') {
            fprintf(stderr, "No valid boot device for Mac99 machine\n");
            exit(1);
        }
    }

    isa_mem_base = 0x80000000;

    /* Register 8 MB of ISA IO space */
    isa_mmio_init(0xf2000000, 0x00800000);

    /* UniN init */
    unin_memory = cpu_register_io_memory(unin_read, unin_write, NULL);
    cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);

    openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
    openpic_irqs[0] =
        qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    for (i = 0; i < smp_cpus; i++) {
        /* Mac99 IRQ connection between OpenPIC outputs pins
         * and PowerPC input pins
         */
        switch (PPC_INPUT(env)) {
        case PPC_FLAGS_INPUT_6xx:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
            break;
#if defined(TARGET_PPC64)
        case PPC_FLAGS_INPUT_970:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
            break;
#endif /* defined(TARGET_PPC64) */
        default:
            hw_error("Bus model not supported on mac99 machine\n");
            exit(1);
        }
    }
    pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
    pci_bus = pci_pmac_init(pic);
    /* init basic PC hardware */
    pci_vga_init(pci_bus, vga_bios_offset, vga_bios_size);

    /* XXX: suppress that */
    dummy_irq = i8259_init(NULL);

    escc_mem_index = escc_init(0x80013000, dummy_irq[4], dummy_irq[5],
                               serial_hds[0], serial_hds[1], ESCC_CLOCK, 4);

    for(i = 0; i < nb_nics; i++)
        pci_nic_init(&nd_table[i], "ne2k_pci", NULL);

    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }
    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
        index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
        if (index != -1)
            hd[i] = drives_table[index].bdrv;
        else
            hd[i] = NULL;
    }
    dbdma = DBDMA_init(&dbdma_mem_index);
    pci_cmd646_ide_init(pci_bus, hd, 0);

    /* cuda also initialize ADB */
    cuda_init(&cuda_mem_index, pic[0x19]);

    adb_kbd_init(&adb_bus);
    adb_mouse_init(&adb_bus);


    macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem_index,
               dbdma_mem_index, cuda_mem_index, NULL, 0, NULL,
               escc_mem_index);

    if (usb_enabled) {
        usb_ohci_init_pci(pci_bus, 3, -1);
    }

    if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
        graphic_depth = 15;

    /* The NewWorld NVRAM is not located in the MacIO device */
    nvr = macio_nvram_init(&nvram_mem_index, 0x2000, 1);
    pmac_format_nvram_partition(nvr, 0x2000);
    macio_nvram_map(nvr, 0xFFF04000);
    /* No PCI init: the BIOS will do it */

    fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
    fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_MAC99);
    fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
    fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
    if (kernel_cmdline) {
        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
        pstrcpy_targphys(CMDLINE_ADDR, TARGET_PAGE_SIZE, kernel_cmdline);
    } else {
        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
    }
    fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
    fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}