void CheckBoxMenu::drawOuter()
{
GUI_SetColor(CHECKBOX_OUTER_COLOR);
GUI_DrawRect(x0+CheckBox_A_margin,
y0+CheckBox_A_margin,
x0+CheckBox_A_margin+getAL(),
y0+CheckBox_A_margin+getAL());
}
void CheckBoxMenu::paint(int arg)
{
switch(arg)
{
case MENU_SHOW_NULL:
break;
case MENU_SHOW_NORMAL:
showNormal();
break;
case MENU_SHOW_HIGHLIGHT:
showHighlight();
break;
}
if(status)
{
drawOuter();
drawInner();
}else
{
drawOuter();
clearInner();
}
printString(text.data(),x0+4+getAL()+CheckBox_A_margin,y0+4,MENU_TEXT_COLOR);
Rectangle::paint(MENU_TEXT_BORDER_COLOR);
needPaint=false;
}
long indexOfAL(ArrayList* liste, void* element) {
unsigned long l = liste->nbrAssignees;
unsigned long i = 0;
while (i < l && getAL(liste, i) != element) {
i++;
}
if (i == l) {
return -1;
}
return (long) i;
}
VOID cmdExec (VOID)
{
DWORD i;
DWORD dwRet;
PCHAR pCommandTail;
PCHAR pEnv;
CHAR Buffer[MAX_PATH];
pCommandTail = (PCHAR) GetVDMAddr ((USHORT)getDS(),(USHORT)getSI());
pEnv = (PCHAR) GetVDMAddr ((USHORT)getES(),0);
for (i=0 ; i<124 ; i++) {
if (pCommandTail[i] == 0x0d){
pCommandTail[i] = 0;
break;
}
}
if (i == 124){
setCF(0);
setAL((UCHAR)ERROR_BAD_FORMAT);
return;
}
chDefaultDrive = (CHAR)(getAL() + 'A');
if (getAH() == 0) {
cmdExec32 (pCommandTail,pEnv);
}
else {
dwRet = GetEnvironmentVariable ("COMSPEC",Buffer,MAX_PATH);
if (dwRet == 0 || dwRet >= MAX_PATH){
setCF(0);
setAL((UCHAR)ERROR_BAD_ENVIRONMENT);
return;
}
if ((dwRet + 4 + strlen(pCommandTail)) > MAX_PATH) {
setCF(0);
setAL((UCHAR)ERROR_BAD_ENVIRONMENT);
return;
}
strcat (Buffer, " /c ");
strcat (Buffer, pCommandTail);
cmdExec32 (Buffer,pEnv);
}
return;
}
VOID cmdReturnExitCode (VOID)
{
VDMINFO VDMInfo;
PREDIRCOMPLETE_INFO pRdrInfo;
VDMInfo.VDMState = RETURN_ON_NO_COMMAND;
VDMInfo.EnviornmentSize = 0;
VDMInfo.ErrorCode = (ULONG)getDX();
VDMInfo.CmdSize = 0;
VDMInfo.TitleLen = 0;
VDMInfo.ReservedLen = 0;
VDMInfo.DesktopLen = 0;
VDMInfo.CurDirectoryLen = 0;
CntrlHandlerState = (CntrlHandlerState & ~CNTRL_SHELLCOUNT) |
(((WORD)(CntrlHandlerState & CNTRL_SHELLCOUNT))+1);
nt_block_event_thread(0);
fBlock = TRUE;
// a dos program just terminate, inherit its current directories
// and tell base too.
cmdUpdateCurrentDirectories((BYTE)getAL());
// Check for any copying needed for redirection
pRdrInfo = (PREDIRCOMPLETE_INFO) (((ULONG)getBX() << 16) + (ULONG)getCX());
if (cmdCheckCopyForRedirection (pRdrInfo) == FALSE)
VDMInfo.ErrorCode = ERROR_NOT_ENOUGH_MEMORY;
GetNextVDMCommand (&VDMInfo);
if (VDMInfo.CmdSize > 0){
setCF(1);
IsRepeatCall = TRUE;
}
else {
setCF(0);
setAL((UCHAR)dwExitCode32);
nt_resume_event_thread();
nt_std_handle_notification(fSoftpcRedirectionOnShellOut);
fBlock = FALSE;
}
CntrlHandlerState = (CntrlHandlerState & ~CNTRL_SHELLCOUNT) |
(((WORD)(CntrlHandlerState & CNTRL_SHELLCOUNT))-1);
return;
}
void MS_bop_E(void)
{
unsigned char code;
code = getAL();
if (code == 0) {
UMBNotify(0);
demDasdInit();
}
else {
#ifndef PROD
printf("Invalid notification bop\n");
#endif
}
}
void MsBopB(){
switch (getAH()) {
case 0 :
setAH(0);
while (!tkbhit());
setAL((BYTE)tgetch());
break;
case 1 :
tputch(getAL());
break;
}
}
VOID cmdExecComspec32 (VOID)
{
CHAR Buffer[MAX_PATH];
DWORD dwRet;
PCHAR pEnv;
dwRet = GetEnvironmentVariable ("COMSPEC",Buffer,MAX_PATH);
if (dwRet == 0 || dwRet >= MAX_PATH){
setCF(0);
setAL((UCHAR)ERROR_BAD_ENVIRONMENT);
return;
}
pEnv = (PCHAR) GetVDMAddr ((USHORT)getES(),0);
chDefaultDrive = (CHAR)(getAL() + 'A');
cmdExec32 (Buffer,pEnv);
return;
}
VOID demLockOper (VOID)
{
HANDLE hFile;
DWORD dwFileOffset,cbLock;
// Collect all the parameters
hFile = GETHANDLE(getBX(),getBP());
dwFileOffset = GETULONG (getCX(),getDX());
cbLock = GETULONG (getSI(),getDI());
if(getAL() == 0){ // Locking case
if (LockFile (hFile,
dwFileOffset,
0,
cbLock,
0
) == TRUE) {
setCF (0);
return;
}
}
else {
if (UnlockFile (hFile,
dwFileOffset,
0,
cbLock,
0
) == TRUE) {
setCF (0);
return;
}
}
// Operation failed
demClientError(hFile, (CHAR)-1);
return;
}
void* removeAtIndexAL(ArrayList* liste, unsigned long index) {//renvoie l'élément enlevé
// -------------- à supprimer après débogage -------------
if (index >= liste->nbrAssignees) {
printf("L'arrayList n'est pas assez longue"); //modif
exit(EXIT_FAILURE);
}
//--------------------------------------------------------
if (index == liste->nbrAssignees - 1) {
return removeLastAL(liste);
}
void* aSupprimer = getAL(liste, index);
//tab[i] = tab[i+1]
void* position = liste->tableau + index * sizeof (void*);
void** actuel = position;
void** suivant = position + sizeof (void*);
for (unsigned long i = index; i <= liste->nbrAssignees - 2; i++) {
*actuel = *suivant;
position += sizeof (void*);
actuel = position;
suivant = position + sizeof (void*);
}
liste->nbrAssignees--;
return aSupprimer;
}
/* cette fonction ne marche que lorsque l'arraylist ne contient que
* des types simples. OUI MAIS PK?
*/
void terminateArrayListTotal(ArrayList* liste) {
for (unsigned long i = 0; i < liste->nbrAssignees; i++) {
free(getAL(liste, i));
}
terminateArrayList(liste);
}
int CheckBoxMenu::getAS()
{
return (getAL()-CheckBox_A_padding*2);
}
/*static*/
VOID WINAPI BiosDiskService(LPWORD Stack)
{
BYTE Drive;
PDISK_IMAGE DiskImage;
switch (getAH())
{
/* Disk -- Reset Disk System */
case 0x00:
{
Drive = getDL();
if (Drive & 0x80)
{
AllDisksReset();
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
break;
}
Drive &= ~0x80;
if (Drive >= ARRAYSIZE(FloppyDrive))
{
DPRINT1("BiosDiskService(0x00): Drive number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
// TODO: Reset drive
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
break;
}
/* Disk -- Get Status of Last Operation */
case 0x01:
{
BYTE LastOperationStatus = 0x00;
Drive = getDL();
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x01): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
LastOperationStatus = DiskImage->LastOperationStatus;
if (Drive & 0x80)
Bda->LastDiskOperation = LastOperationStatus;
else
Bda->LastDisketteOperation = LastOperationStatus;
/* Return last error */
setAH(LastOperationStatus);
if (LastOperationStatus == 0x00)
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
else
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Disk -- Read Sectors into Memory */
case 0x02:
{
BYTE Status;
BYTE Head = getDH();
BYTE NumSectors = getAL();
// CH: Low eight bits of cylinder number
// CL: High two bits of cylinder (bits 6-7, hard disk only)
WORD Cylinder = MAKEWORD(getCH(), (getCL() >> 6) & 0x02);
// CL: Sector number 1-63 (bits 0-5)
BYTE Sector = (getCL() & 0x3F); // 1-based
Drive = getDL();
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x02): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Read the sectors */
Status = ReadDisk(DiskImage, Cylinder, Head, Sector, NumSectors);
if (Status == 0x00)
{
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
}
else
{
DPRINT1("BiosDiskService(0x02): Error when reading from disk number 0x%02X (0x%02X)\n", Drive, Status);
/* Return error */
setAH(Status);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
}
break;
}
/* Disk -- Write Disk Sectors */
case 0x03:
{
BYTE Status;
BYTE Head = getDH();
BYTE NumSectors = getAL();
// CH: Low eight bits of cylinder number
// CL: High two bits of cylinder (bits 6-7, hard disk only)
WORD Cylinder = MAKEWORD(getCH(), (getCL() >> 6) & 0x02);
// CL: Sector number 1-63 (bits 0-5)
BYTE Sector = (getCL() & 0x3F); // 1-based
Drive = getDL();
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x03): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Write the sectors */
Status = WriteDisk(DiskImage, Cylinder, Head, Sector, NumSectors);
if (Status == 0x00)
{
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
}
else
{
DPRINT1("BiosDiskService(0x03): Error when writing to disk number 0x%02X (0x%02X)\n", Drive, Status);
/* Return error */
setAH(Status);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
}
break;
}
/* Disk -- Verify Disk Sectors */
case 0x04:
/* Floppy/Fixed Disk -- Format Track */
case 0x05:
/* Fixed Disk -- Format Track and Set Bad Sector Flags */
case 0x06:
/* Fixed Disk -- Format Drive starting at Given Track */
case 0x07:
goto Default;
/* Disk -- Get Drive Parameters */
case 0x08:
{
WORD MaxCylinders;
BYTE MaxHeads;
BYTE PresentDrives = 0;
BYTE i;
Drive = getDL();
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x08): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
// Minus 2 because it's the maximum cylinder number (not count),
// and the last cylinder is reserved (for compatibility with BIOSes
// which reserve it for testing purposes).
MaxCylinders = DiskImage->DiskInfo.Cylinders - 2;
// Minus 1 because it's the maximum head number (not count).
MaxHeads = DiskImage->DiskInfo.Heads - 1;
// CL: Sector number 1-63 (bits 0-5)
// High two bits of cylinder (bits 6-7, hard disk only)
setCL((DiskImage->DiskInfo.Sectors & 0x3F) |
((HIBYTE(MaxCylinders) & 0x02) << 6));
// CH: Low eight bits of cylinder number
setCH(LOBYTE(MaxCylinders));
setDH(MaxHeads);
if (Drive & 0x80)
{
/* Count the number of active HDDs */
for (i = 0; i < ARRAYSIZE(HardDrive); ++i)
{
if (IsDiskPresent(HardDrive[i]))
++PresentDrives;
}
/* Reset ES:DI to NULL */
// FIXME: NONONO!! Apps expect (for example, MS-DOS kernel)
// that this function does not modify ES:DI if it was called
// for a HDD.
// setES(0x0000);
// setDI(0x0000);
}
else
{
/* Count the number of active floppies */
for (i = 0; i < ARRAYSIZE(FloppyDrive); ++i)
{
if (IsDiskPresent(FloppyDrive[i]))
++PresentDrives;
}
/* ES:DI points to the floppy parameter table */
setES(HIWORD(((PULONG)BaseAddress)[0x1E]));
setDI(LOWORD(((PULONG)BaseAddress)[0x1E]));
}
setDL(PresentDrives);
setBL(DiskImage->DiskType); // DiskGeometryList[DiskImage->DiskType].biosval
setAL(0x00);
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
break;
}
/* Hard Disk -- Initialize Controller with Drive Parameters */
case 0x09:
/* Hard Disk -- Read Long Sectors */
case 0x0A:
/* Hard Disk -- Write Long Sectors */
case 0x0B:
goto Default;
/* Hard Disk -- Seek to Cylinder */
case 0x0C:
{
BYTE Status;
BYTE Head = getDH();
// CH: Low eight bits of cylinder number
// CL: High two bits of cylinder (bits 6-7, hard disk only)
WORD Cylinder = MAKEWORD(getCH(), (getCL() >> 6) & 0x02);
// CL: Sector number 1-63 (bits 0-5)
BYTE Sector = (getCL() & 0x3F); // 1-based
Drive = getDL();
if (!(Drive & 0x80))
{
DPRINT1("BiosDiskService(0x0C): Disk number 0x%02X is not a HDD\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x0C): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Set position */
Status = SeekDisk(DiskImage, Cylinder, Head, Sector);
if (Status == 0x00)
{
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
}
else
{
DPRINT1("BiosDiskService(0x0C): Error when seeking in disk number 0x%02X (0x%02X)\n", Drive, Status);
/* Return error */
setAH(Status);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
}
break;
}
/* Hard Disk -- Reset Hard Disks */
case 0x0D:
{
// FIXME: Should do what 0x11 does.
UNIMPLEMENTED;
}
/* Hard Disk -- Read Sector Buffer (XT only) */
case 0x0E:
/* Hard Disk -- Write Sector Buffer (XT only) */
case 0x0F:
goto Default;
/* Hard Disk -- Check if Drive is ready */
case 0x10:
{
Drive = getDL();
if (!(Drive & 0x80))
{
DPRINT1("BiosDiskService(0x10): Disk number 0x%02X is not a HDD\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x10): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
break;
}
/* Hard Disk -- Recalibrate Drive */
case 0x11:
{
BYTE Status;
Drive = getDL();
if (!(Drive & 0x80))
{
DPRINT1("BiosDiskService(0x11): Disk number 0x%02X is not a HDD\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x11): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
/* Set position to zero */
Status = SeekDisk(DiskImage, /*Cylinder*/ 0, /*Head*/ 0, /*Sector*/ 1);
if (Status == 0x00)
{
/* Return success */
setAH(0x00);
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
}
else
{
DPRINT1("BiosDiskService(0x11): Error when recalibrating disk number 0x%02X (0x%02X)\n", Drive, Status);
/* Return error */
setAH(Status);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
}
break;
}
/* Hard Disk -- Controller RAM Diagnostic */
case 0x12:
/* Hard Disk -- Drive Diagnostic */
case 0x13:
/* Hard Disk -- Controller Internal Diagnostic */
case 0x14:
goto Default;
/* Disk -- Get Disk Type */
case 0x15:
{
Drive = getDL();
DiskImage = GetDisk(Drive);
if (!DiskImage || !IsDiskPresent(DiskImage))
{
DPRINT1("BiosDiskService(0x15): Disk number 0x%02X invalid\n", Drive);
/* Return error */
setAH(0x01);
Stack[STACK_FLAGS] |= EMULATOR_FLAG_CF;
break;
}
if (Drive & 0x80)
{
ULONG NumSectors;
/* Hard disk */
setAH(0x03);
/* Number of 512-byte sectors in CX:DX */
NumSectors = (ULONG)((ULONG)DiskImage->DiskInfo.Cylinders * DiskImage->DiskInfo.Heads)
* DiskImage->DiskInfo.Sectors;
setCX(HIWORD(NumSectors));
setDX(LOWORD(NumSectors));
}
else
{
/* Floppy */
setAH(0x01);
}
/* Return success */
Stack[STACK_FLAGS] &= ~EMULATOR_FLAG_CF;
break;
}
/* Floppy Disk -- Detect Disk Change */
case 0x16:
/* Floppy Disk -- Set Disk Type for Format */
case 0x17:
/* Disk -- Set Media Type for Format */
case 0x18:
goto Default;
default: Default:
{
DPRINT1("BIOS Function INT 13h, AH = 0x%02X, AL = 0x%02X, BH = 0x%02X NOT IMPLEMENTED\n",
getAH(), getAL(), getBH());
}
}
}
void rs232_io()
{
#ifdef BIT_ORDER2
union {
half_word all;
struct {
HALF_WORD_BIT_FIELD word_length:2;
HALF_WORD_BIT_FIELD stop_bit:1;
HALF_WORD_BIT_FIELD parity:2;
HALF_WORD_BIT_FIELD baud_rate:3;
} bit;
} parameters;
#endif
#ifdef BIT_ORDER1
union {
half_word all;
struct {
HALF_WORD_BIT_FIELD baud_rate:3;
HALF_WORD_BIT_FIELD parity:2;
HALF_WORD_BIT_FIELD stop_bit:1;
HALF_WORD_BIT_FIELD word_length:2;
} bit;
} parameters;
#endif
DIVISOR_LATCH divisor_latch;
int j;
half_word timeout;
sys_addr timeout_location;
/* clear com/lpt idle flag */
IDLE_comlpt ();
setIF(1);
/*
* Which adapter?
*/
switch (getDX ())
{
case 0:
port = RS232_COM1_PORT_START;
timeout_location = RS232_COM1_TIMEOUT;
break;
case 1:
port = RS232_COM2_PORT_START;
timeout_location = RS232_COM2_TIMEOUT;
break;
case 2:
port = RS232_COM3_PORT_START;
timeout_location = RS232_COM3_TIMEOUT;
break;
case 3:
port = RS232_COM4_PORT_START;
timeout_location = RS232_COM4_TIMEOUT;
break;
default:
break;
}
/*
* Determine function
*/
switch (getAH ())
{
case 0:
/*
* Initialise the communication port
*/
value = 0x80; /* set DLAB */
outb(port + (io_addr) RS232_LCR, value);
/*
* Set baud rate
*/
parameters.all = getAL();
divisor_latch.all = divisors[parameters.bit.baud_rate];
outb(port + (io_addr) RS232_IER, divisor_latch.byte.MSByte);
outb(port + (io_addr) RS232_TX_RX, divisor_latch.byte.LSByte);
/*
* Set word length, stop bits and parity
*/
parameters.bit.baud_rate = 0;
outb(port + (io_addr) RS232_LCR, parameters.all);
/*
* Disable interrupts
*/
value = 0;
outb(port + (io_addr) RS232_IER, value);
return_status();
break;
case 1:
/*
* Send char over the comms line
*/
/*
* Set DTR and RTS
*/
outb(port + (io_addr) RS232_MCR, 3);
/*
* Real BIOS checks CTS and DSR - we know DSR ok.
* Real BIOS check THRE - we know it's ok.
* We only check CTS - this is supported on a few ports, eg. Macintosh.
*/
/*
* Wait for CTS to go high, or timeout
*/
sas_load(timeout_location, &timeout);
for ( j = 0; j < timeout; j++)
{
inb(port + (io_addr) RS232_MSR, &value);
if(value & 0x10)break; /* CTS High, all is well */
}
if(j < timeout)
{
outb(port + (io_addr) RS232_TX_RX, getAL()); /* Send byte */
inb(port + (io_addr) RS232_LSR, &value);
setAH(value); /* Return Line Status Reg in AH */
}
else
{
setAH(value | 0x80); /* Indicate time out */
}
break;
case 2:
/*
* Receive char over the comms line
*/
/*
* Set DTR
*/
value = 1;
outb(port + (io_addr) RS232_MCR, value);
/*
* Real BIOS checks DSR - we know it's ok.
*/
/*
* Wait for data to appear, or timeout(just an empirical guess)
*/
sas_load(timeout_location, &timeout);
for ( j = 0; j < timeout; j++)
{
inb(port + (io_addr) RS232_LSR, &value);
if ( (value & 1) == 1 )
{
/*
* Data ready go read it
*/
value &= 0x1e; /* keep error bits only */
setAH(value);
inb(port + (io_addr) RS232_TX_RX, &value);
setAL(value);
return;
}
}
/*
* Set timeout
*/
value |= 0x80;
setAH(value);
break;
case 3:
/*
* Return the communication port status
*/
return_status();
break;
case 4:
/*
* EXTENDED (PS/2) Initialise the communication port
*/
value = 0x80; /* set DLAB */
outb(port + (io_addr) RS232_LCR, value);
parameters.bit.word_length = getCH();
parameters.bit.stop_bit = getBL();
parameters.bit.parity = getBH();
parameters.bit.baud_rate = getCL();
/*
Set baud rate
*/
divisor_latch.all = divisors[parameters.bit.baud_rate];
outb(port + (io_addr) RS232_IER, divisor_latch.byte.MSByte);
outb(port + (io_addr) RS232_TX_RX, divisor_latch.byte.LSByte);
/*
* Set word length, stop bits and parity
*/
parameters.bit.baud_rate = 0;
outb(port + (io_addr) RS232_LCR, parameters.all);
/*
* Disable interrupts
*/
value = 0;
outb(port + (io_addr) RS232_IER, value);
return_status();
break;
case 5: /* EXTENDED Comms Port Control */
switch( getAL() )
{
case 0: /* Read modem control register */
inb( port + (io_addr) RS232_MCR, &value);
setBL(value);
break;
case 1: /* Write modem control register */
outb( port + (io_addr) RS232_MCR, getBL());
break;
}
/*
Return the communication port status
*/
return_status();
break;
default:
/*
** Yes both XT and AT BIOS's really do this.
*/
setAH( getAH()-3 );
break;
}
}
void printer_io()
{
#ifdef PRINTER
half_word time_out, status;
word printer_io_address, printer_io_reg, printer_status_reg, printer_control_reg;
boolean printer_busy = TRUE;
unsigned long time_count;
int adapter;
#ifdef NTVDM
int bopsubfunction = getSI();
switch (bopsubfunction) {
#ifdef MONITOR
case 0:
/* this is the bop to flush 16bit printer buffer */
printer_bop_flush ();
return;
#endif
case 1:
case 2:
/* this is the bop to track a DOS open/close on LPTn */
printer_bop_openclose (bopsubfunction);
return;
}
#endif
setIF(1);
adapter = getDX() % NUM_PARALLEL_PORTS;
sas_loadw(port_address[adapter], &printer_io_address);
printer_io_reg = printer_io_address;
printer_status_reg = printer_io_address + 1;
printer_control_reg = printer_io_address + 2;
sas_load(timeout_address[adapter], &time_out);
time_count = time_out * 0xFFFF;
if (printer_io_address != 0)
{
IDLE_comlpt ();
switch(getAH())
{
case 0:
/* Check the port status for busy before sending the character*/
while(printer_busy && time_count > 0)
{
/* The host_lpt_status() should check for status changes */
/* possibly by calling AsyncEventManager() if it's using */
/* XON /XOFF flow control. */
inb(printer_status_reg, &status);
if (status & 0x80)
printer_busy = FALSE;
else
time_count--;
}
if (printer_busy)
{
status &= 0xF8; /* clear bottom unused bits */
status |= 1; /* set error flag */
}
else
{
/* Only send the character if the port isn't still busy */
outb(printer_io_reg, getAL());
outb(printer_control_reg, 0x0D); /* strobe low-high */
outb(printer_control_reg, 0x0C); /* strobe high-low */
inb(printer_status_reg, &status);
status &= 0xF8; /* clear unused bits */
}
status ^= 0x48; /* flip the odd bit */
setAH(status);
break;
case 1: outb(printer_control_reg, 0x08); /* set init line low */
outb(printer_control_reg, 0x0C); /* set init line high */
inb(printer_status_reg, &status);
status &= 0xF8; /* clear unused bits */
status ^= 0x48; /* flip the odd bit */
setAH(status);
break;
case 2: inb(printer_status_reg, &status);
status &= 0xF8; /* clear unused bits */
status ^= 0x48; /* flip the odd bit */
setAH(status);
break;
default:
break;
}
}
#endif
}
// Keyboard IRQ 1
static VOID WINAPI BiosKeyboardIrq(LPWORD Stack)
{
BOOLEAN SkipScanCode;
BYTE ScanCode, VirtualKey;
WORD Character;
/*
* Get the scan code from the PS/2 port, then call the
* INT 15h, AH=4Fh Keyboard Intercept function to try to
* translate the scan code. CF must be set before the call.
* In return, if CF is set we continue processing the scan code
* stored in AL, and if not, we skip it.
*/
BYTE CF;
WORD AX;
CF = getCF();
AX = getAX();
setCF(1);
setAL(IOReadB(PS2_DATA_PORT));
setAH(0x4F);
Int32Call(&BiosContext, BIOS_MISC_INTERRUPT);
/* Retrieve the modified scan code in AL */
SkipScanCode = (getCF() == 0);
ScanCode = getAL();
setAX(AX);
setCF(CF);
/* Check whether CF is clear. If so, skip the scan code. */
if (SkipScanCode) goto Quit;
/* Get the corresponding virtual key code */
VirtualKey = MapVirtualKey(ScanCode & 0x7F, MAPVK_VSC_TO_VK);
/* Check if this is a key press or release */
if (!(ScanCode & (1 << 7)))
{
/* Key press */
if (VirtualKey == VK_NUMLOCK ||
VirtualKey == VK_CAPITAL ||
VirtualKey == VK_SCROLL ||
VirtualKey == VK_INSERT)
{
/* For toggle keys, toggle the lowest bit in the keyboard map */
BiosKeyboardMap[VirtualKey] ^= ~(1 << 0);
}
/* Set the highest bit */
BiosKeyboardMap[VirtualKey] |= (1 << 7);
/* Find out which character this is */
Character = 0;
if (ToAscii(VirtualKey, ScanCode, BiosKeyboardMap, &Character, 0) == 0)
{
/* Not ASCII */
Character = 0;
}
/* Push it onto the BIOS keyboard queue */
BiosKbdBufferPush(MAKEWORD(Character, ScanCode));
}
else
{
/* Key release, unset the highest bit */
BiosKeyboardMap[VirtualKey] &= ~(1 << 7);
}
/* Clear the keyboard flags */
Bda->KeybdShiftFlags = 0;
/* Set the appropriate flags based on the state */
if (BiosKeyboardMap[VK_RSHIFT] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_RSHIFT;
if (BiosKeyboardMap[VK_LSHIFT] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_LSHIFT;
if (BiosKeyboardMap[VK_CONTROL] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_CTRL;
if (BiosKeyboardMap[VK_MENU] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_ALT;
if (BiosKeyboardMap[VK_SCROLL] & (1 << 0)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_SCROLL_ON;
if (BiosKeyboardMap[VK_NUMLOCK] & (1 << 0)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_NUMLOCK_ON;
if (BiosKeyboardMap[VK_CAPITAL] & (1 << 0)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_CAPSLOCK_ON;
if (BiosKeyboardMap[VK_INSERT] & (1 << 0)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_INSERT_ON;
if (BiosKeyboardMap[VK_RMENU] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_RALT;
if (BiosKeyboardMap[VK_LMENU] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_LALT;
if (BiosKeyboardMap[VK_SNAPSHOT] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_SYSRQ;
if (BiosKeyboardMap[VK_PAUSE] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_PAUSE;
if (BiosKeyboardMap[VK_SCROLL] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_SCROLL;
if (BiosKeyboardMap[VK_NUMLOCK] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_NUMLOCK;
if (BiosKeyboardMap[VK_CAPITAL] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_CAPSLOCK;
if (BiosKeyboardMap[VK_INSERT] & (1 << 7)) Bda->KeybdShiftFlags |= BDA_KBDFLAG_INSERT;
DPRINT("BiosKeyboardIrq - Character = 0x%X, ScanCode = 0x%X, KeybdShiftFlags = 0x%X\n",
Character, ScanCode, Bda->KeybdShiftFlags);
Quit:
PicIRQComplete(Stack);
}
static VOID WINAPI EmsIntHandler(LPWORD Stack)
{
switch (getAH())
{
/* Get Manager Status */
case 0x40:
{
setAH(EMS_STATUS_SUCCESS);
break;
}
/* Get Page Frame Segment */
case 0x41:
{
setAH(EMS_STATUS_SUCCESS);
setBX(EmsSegment);
break;
}
/* Get Number of Unallocated Pages */
case 0x42:
{
setAH(EMS_STATUS_SUCCESS);
setBX(RtlNumberOfClearBits(&AllocBitmap));
setDX(EmsTotalPages);
break;
}
/* Get Handle and Allocate Memory */
case 0x43:
{
USHORT Handle;
UCHAR Status = EmsAlloc(getBX(), &Handle);
if (Status == EMS_STATUS_SUCCESS)
setDX(Handle);
setAH(Status);
break;
}
/* Map Memory */
case 0x44:
{
setAH(EmsMap(getDX(), getAL(), getBX()));
break;
}
/* Release Handle and Memory */
case 0x45:
{
setAH(EmsFree(getDX()));
break;
}
/* Get EMM Version */
case 0x46:
{
setAH(EMS_STATUS_SUCCESS);
setAL(EMS_VERSION_NUM);
break;
}
/* Save Page Map */
case 0x47:
{
// FIXME: This depends on an EMS handle given in DX
RtlCopyMemory(MappingBackup, Mapping, sizeof(Mapping));
setAH(EMS_STATUS_SUCCESS);
break;
}
/* Restore Page Map */
case 0x48:
{
// FIXME: This depends on an EMS handle given in DX
RtlCopyMemory(Mapping, MappingBackup, sizeof(Mapping));
setAH(EMS_STATUS_SUCCESS);
break;
}
/* Get Number of Opened Handles */
case 0x4B:
{
USHORT NumOpenHandles = 0;
USHORT i;
for (i = 0; i < ARRAYSIZE(HandleTable); i++)
{
if (HandleTable[i].Allocated)
++NumOpenHandles;
}
setAH(EMS_STATUS_SUCCESS);
setBX(NumOpenHandles);
break;
}
/* Get Handle Number of Pages */
case 0x4C:
{
PEMS_HANDLE HandleEntry = GetHandleRecord(getDX());
if (!ValidateHandle(HandleEntry))
{
setAH(EMS_STATUS_INVALID_HANDLE);
break;
}
setAH(EMS_STATUS_SUCCESS);
setBX(HandleEntry->PageCount);
break;
}
/* Get All Handles Number of Pages */
case 0x4D:
{
PEMS_HANDLE_PAGE_INFO HandlePageInfo = (PEMS_HANDLE_PAGE_INFO)SEG_OFF_TO_PTR(getES(), getDI());
USHORT NumOpenHandles = 0;
USHORT i;
for (i = 0; i < ARRAYSIZE(HandleTable); i++)
{
if (HandleTable[i].Allocated)
{
HandlePageInfo->Handle = i;
HandlePageInfo->PageCount = HandleTable[i].PageCount;
++HandlePageInfo;
++NumOpenHandles;
}
}
setAH(EMS_STATUS_SUCCESS);
setBX(NumOpenHandles);
break;
}
/* Get or Set Page Map */
case 0x4E:
{
switch (getAL())
{
/* Get Mapping Registers */
// case 0x00: // TODO: NOT IMPLEMENTED
/* Set Mapping Registers */
// case 0x01: // TODO: NOT IMPLEMENTED
/* Get and Set Mapping Registers At Once */
// case 0x02: // TODO: NOT IMPLEMENTED
/* Get Size of Page-Mapping Array */
case 0x03:
{
setAH(EMS_STATUS_SUCCESS);
setAL(sizeof(Mapping));
break;
}
default:
{
DPRINT1("EMS function AH = 0x4E, subfunction AL = %02X NOT IMPLEMENTED\n", getAL());
setAH(EMS_STATUS_UNKNOWN_FUNCTION);
break;
}
}
break;
}
/* Get/Set Handle Name */
case 0x53:
{
PEMS_HANDLE HandleEntry = GetHandleRecord(getDX());
if (!ValidateHandle(HandleEntry))
{
setAH(EMS_STATUS_INVALID_HANDLE);
break;
}
if (getAL() == 0x00)
{
/* Retrieve the name */
RtlCopyMemory(SEG_OFF_TO_PTR(getES(), getDI()),
HandleEntry->Name,
sizeof(HandleEntry->Name));
setAH(EMS_STATUS_SUCCESS);
}
else if (getAL() == 0x01)
{
/* Store the name */
RtlCopyMemory(HandleEntry->Name,
SEG_OFF_TO_PTR(getDS(), getSI()),
sizeof(HandleEntry->Name));
setAH(EMS_STATUS_SUCCESS);
}
else
{
DPRINT1("Invalid subfunction %02X for EMS function AH = 53h\n", getAL());
setAH(EMS_STATUS_INVALID_SUBFUNCTION);
}
break;
}
/* Handle Directory functions */
case 0x54:
{
if (getAL() == 0x00)
{
/* Get Handle Directory */
PEMS_HANDLE_DIR_ENTRY HandleDir = (PEMS_HANDLE_DIR_ENTRY)SEG_OFF_TO_PTR(getES(), getDI());
USHORT NumOpenHandles = 0;
USHORT i;
for (i = 0; i < ARRAYSIZE(HandleTable); i++)
{
if (HandleTable[i].Allocated)
{
HandleDir->Handle = i;
RtlCopyMemory(HandleDir->Name,
HandleTable[i].Name,
sizeof(HandleDir->Name));
++HandleDir;
++NumOpenHandles;
}
}
setAH(EMS_STATUS_SUCCESS);
setAL((UCHAR)NumOpenHandles);
}
else if (getAL() == 0x01)
{
/* Search for Named Handle */
PUCHAR HandleName = (PUCHAR)SEG_OFF_TO_PTR(getDS(), getSI());
PEMS_HANDLE HandleFound = NULL;
USHORT i;
for (i = 0; i < ARRAYSIZE(HandleTable); i++)
{
if (HandleTable[i].Allocated &&
RtlCompareMemory(HandleName,
HandleTable[i].Name,
sizeof(HandleTable[i].Name)) == sizeof(HandleTable[i].Name))
{
HandleFound = &HandleTable[i];
break;
}
}
/* Bail out if no handle was found */
if (i >= ARRAYSIZE(HandleTable)) // HandleFound == NULL
{
setAH(EMS_STATUS_HANDLE_NOT_FOUND);
break;
}
/* Return the handle number */
setDX(i);
/* Sanity check: Check whether the handle was unnamed */
i = 0;
while ((i < sizeof(HandleFound->Name)) && (HandleFound->Name[i] == '\0'))
++i;
if (i >= sizeof(HandleFound->Name))
{
setAH(EMS_STATUS_UNNAMED_HANDLE);
}
else
{
setAH(EMS_STATUS_SUCCESS);
}
}
else if (getAL() == 0x02)
{
/*
* Get Total Number of Handles
*
* This function retrieves the maximum number of handles
* (allocated or not) the memory manager supports, which
* a program may request.
*/
setAH(EMS_STATUS_SUCCESS);
setBX(ARRAYSIZE(HandleTable));
}
else
{
DPRINT1("Invalid subfunction %02X for EMS function AH = 54h\n", getAL());
setAH(EMS_STATUS_INVALID_SUBFUNCTION);
}
break;
}
/* Move/Exchange Memory */
case 0x57:
{
PUCHAR SourcePtr, DestPtr;
PEMS_HANDLE HandleEntry;
PEMS_PAGE PageEntry;
BOOLEAN Exchange = getAL();
PEMS_COPY_DATA Data = (PEMS_COPY_DATA)SEG_OFF_TO_PTR(getDS(), getSI());
if (Data->SourceType)
{
/* Expanded memory */
HandleEntry = GetHandleRecord(Data->SourceHandle);
if (!ValidateHandle(HandleEntry))
{
setAH(EMS_STATUS_INVALID_HANDLE);
break;
}
PageEntry = GetLogicalPage(HandleEntry, Data->SourceSegment);
if (!PageEntry)
{
setAH(EMS_STATUS_INV_LOGICAL_PAGE);
break;
}
SourcePtr = (PUCHAR)((ULONG_PTR)EmsMemory
+ ARRAY_INDEX(PageEntry, PageTable) * EMS_PAGE_SIZE
+ Data->SourceOffset);
}
else
{
/* Conventional memory */
SourcePtr = (PUCHAR)SEG_OFF_TO_PTR(Data->SourceSegment, Data->SourceOffset);
}
if (Data->DestType)
{
/* Expanded memory */
HandleEntry = GetHandleRecord(Data->DestHandle);
if (!ValidateHandle(HandleEntry))
{
setAH(EMS_STATUS_INVALID_HANDLE);
break;
}
PageEntry = GetLogicalPage(HandleEntry, Data->DestSegment);
if (!PageEntry)
{
setAH(EMS_STATUS_INV_LOGICAL_PAGE);
break;
}
DestPtr = (PUCHAR)((ULONG_PTR)EmsMemory
+ ARRAY_INDEX(PageEntry, PageTable) * EMS_PAGE_SIZE
+ Data->DestOffset);
}
else
{
/* Conventional memory */
DestPtr = (PUCHAR)SEG_OFF_TO_PTR(Data->DestSegment, Data->DestOffset);
}
if (Exchange)
{
ULONG i;
/* Exchange */
for (i = 0; i < Data->RegionLength; i++)
{
UCHAR Temp = DestPtr[i];
DestPtr[i] = SourcePtr[i];
SourcePtr[i] = Temp;
}
}
else
{
/* Move */
RtlMoveMemory(DestPtr, SourcePtr, Data->RegionLength);
}
setAH(EMS_STATUS_SUCCESS);
break;
}
/* Get Mappable Physical Address Array */
case 0x58:
{
if (getAL() == 0x00)
{
PEMS_MAPPABLE_PHYS_PAGE PageArray = (PEMS_MAPPABLE_PHYS_PAGE)SEG_OFF_TO_PTR(getES(), getDI());
ULONG i;
for (i = 0; i < EMS_PHYSICAL_PAGES; i++)
{
PageArray->PageSegment = EMS_SEGMENT + i * (EMS_PAGE_SIZE >> 4);
PageArray->PageNumber = i;
++PageArray;
}
setAH(EMS_STATUS_SUCCESS);
setCX(EMS_PHYSICAL_PAGES);
}
else if (getAL() == 0x01)
{
setAH(EMS_STATUS_SUCCESS);
setCX(EMS_PHYSICAL_PAGES);
}
else
{
DPRINT1("Invalid subfunction %02X for EMS function AH = 58h\n", getAL());
setAH(EMS_STATUS_INVALID_SUBFUNCTION);
}
break;
}
char getCharAL(ArrayList* liste, unsigned long index) {//un get qui renvoie l'element lu comme un char
char* res = getAL(liste, index);
//printf("%lx\n", res);
return *res;
}
void* getFirstAL(ArrayList* liste) {
return getAL(liste, 0);
}
void* getLastAL(ArrayList* liste) {
return getAL(liste, liste->nbrAssignees - 1);
}