Ejemplo n.º 1
0
/*! Creation of a local destination. */
int setup_destination()
{
    destination = mdev_new("testrecv", port, 0);
    if (!destination)
        goto error;
    printf("destination created.\n");

    float mn=0, mx=1;

    recvsig_1 = mdev_add_input(destination, "/insig_1", 1, 'f',
                               0, &mn, &mx, insig_handler, 0);
    recvsig_2 = mdev_add_input(destination, "/insig_2", 1, 'f',
                               0, &mn, &mx, insig_handler, 0);
    recvsig_3 = mdev_add_input(destination, "/insig_3", 3, 'f',
                               0, &mn, &mx, insig_handler, 0);
    recvsig_4 = mdev_add_input(destination, "/insig_4", 1, 'f',
                               0, &mn, &mx, insig_handler, 0);

    printf("Input signal /insig registered.\n");

    // Make sure we can add and remove inputs and inputs within crashing.
    mdev_remove_input(destination,
                      mdev_add_input(destination, "/insig_5", 1,
                                     'f', 0, &mn, &mx, 0, 0));

    printf("Number of inputs: %d\n", mdev_num_inputs(destination));

    return 0;

  error:
    return 1;
}
Ejemplo n.º 2
0
int main()
{
    signal(SIGINT, ctrlc);

    mapper_device dev = mdev_new("pwm", 9000, 0);

    float min0 = 0;
    float max1 = 1;
    float max1000 = 1000;

    mdev_add_input(dev, "/freq", 1, 'f', "Hz", &min0, &max1000,
                   (mapper_signal_handler*)handler_freq, 0);
    mdev_add_input(dev, "/gain", 1, 'f', "Hz", &min0, &max1,
                   (mapper_signal_handler*)handler_gain, 0);
    mdev_add_input(dev, "/duty", 1, 'f', "Hz", &min0, &max1,
                   (mapper_signal_handler*)handler_duty, 0);

    run_synth();

    set_duty(0.1);
    set_freq(110.0);
    set_gain(0.1);

    printf("Press Ctrl-C to quit.\n");

    while (!done)
        mdev_poll(dev, 10);

    mdev_free(dev);

    set_freq(0);
    sleep(1);

    stop_synth();
}
Ejemplo n.º 3
0
int setup_destinations() {

	char str[20];
	int number;
	float mn=0, mx=1;

	for ( int i=0; i<num_dests; i++ ) {
		
		dest_device_list[i] = mdev_new("dest", port, 0);
		number = num_signals[i];

		for ( int j=0; j<number; j++ ) {

			sprintf( str, "/insig%d", j );
			mdev_add_input(dest_device_list[i], str, 1, 'f',
                           0, &mn, &mx, 0, 0);

		}

		if ( !dest_device_list[i] ) {

			goto error;

		}

	}

    return 0;

  error:
    return 1;

}
Ejemplo n.º 4
0
struct _agentInfo *agentInit()
{
    obs[0] = obs[1] = 0;
    id = 0;

    struct _agentInfo *info = &agentInfo;
    memset(info, 0, sizeof(struct _agentInfo));

    info->influence_device_name = strdup("/influence.1");
    info->xagora_device_name = strdup("/XAgora_receiver.1");

    info->admin = mapper_admin_new(0, 0, 0);

    // add device
    info->dev = mdev_new("agent", 9000 + id, info->admin);
    while (!mdev_ready(info->dev)) {
        mdev_poll(info->dev, 100);
    }
    printf("ordinal: %d\n", mdev_ordinal(info->dev));
    fflush(stdout);

    // add monitor and monitor callbacks
    info->mon = mapper_monitor_new(info->admin, 0);
    info->db  = mapper_monitor_get_db(info->mon);
    mapper_db_add_device_callback(info->db, dev_db_callback, info);
    mapper_db_add_link_callback(info->db, link_db_callback, info);

    // add signals
    float mn=-1, mx=1;
    mdev_add_input(info->dev, "observation", 2, 'f', "norm", &mn, &mx,
                   signal_handler, 0);
    int imn=0, imx=WIDTH;
    info->sig_pos = mdev_add_output(info->dev, "position", 2, 'i', 0, &imn, &imx);
    info->sig_gain = mdev_add_output(info->dev, "gain", 1, 'f',
                               "normalized", &mn, &mx);
    mx = 0.9;
    info->sig_fade = mdev_add_output(info->dev, "fade", 1, 'f', "normalized", &mn, &mx);
    mn = -1.5;
    mx = 1.5;
    info->sig_spin = mdev_add_output(info->dev, "spin", 1, 'f', "radians", &mn, &mx);
    mn = -3.1415926;
    mx = 3.1315926;
    info->sig_dir = mdev_add_output(info->dev, "direction", 1, 'f', "radians", &mn, &mx);
    mn = -1;
    info->sig_flow = mdev_add_output(info->dev, "flow", 1, 'f', "noramlized", &mn, &mx);

    return info;
}
Ejemplo n.º 5
0
int setup_destination()
{
    destination = mdev_new("testrecv", port, 0);
    if (!destination)
        goto error;
    printf("destination created.\n");

    float mn=0, mx=1;
    recvsig = mdev_add_input(destination, "/insig", 3, 'f', 0,
                             &mn, &mx, insig_handler, 0);

    printf("Input signal /insig registered.\n");
    printf("Number of inputs: %d\n", mdev_num_inputs(destination));
    return 0;

  error:
    return 1;
}
Ejemplo n.º 6
0
/*! Creation of a local destination. */
int setup_destination()
{
    destination = mdev_new("testselect-recv", 0, 0);
    if (!destination)
        goto error;
    eprintf("destination created.\n");

    float mn=0, mx=1;

    recvsig = mdev_add_input(destination, "/insig", 1, 'f',
                             0, &mn, &mx, insig_handler, 0);

    eprintf("Input signal /insig registered.\n");

    return 0;

  error:
    return 1;
}
Ejemplo n.º 7
0
/*! Creation of a local destination. */
int setup_destination()
{
    destination = mdev_new("testSpeedRecv", 0, 0);
    if (!destination)
        goto error;
    printf("destination created.\n");

    recvsig = mdev_add_input(destination, "/insig", 1, 'f',
                             0, 0, 0, insig_handler, 0);
    if (!recvsig)
        goto error;
    msig_reserve_instances(recvsig, 9);

    printf("Input signal registered.\n");
    printf("Number of inputs: %d\n", mdev_num_inputs(destination));

    return 0;

  error:
    return 1;
}
Ejemplo n.º 8
0
/*! Creation of a local destination. */
int setup_destination()
{
    char sig_name[10];
    destination = mdev_new("testrecv", port, 0);
    if (!destination)
        goto error;
    printf("destination created.\n");

    float mn=0, mx=1;
        
    for (int i = 0; i < 4; i++) {
        snprintf(sig_name, 10, "%s%i", "/insig_", i);
        recvsig[i] = mdev_add_input(destination, sig_name, 1, 
                                    'f', 0, &mn, &mx, insig_handler, 0);
    }

    printf("Input signal /insig registered.\n");
    printf("Number of inputs: %d\n", mdev_num_inputs(destination));

    return 0;

  error:
    return 1;
}
Ejemplo n.º 9
0
int test_recv()
{
    mapper_device md = mdev_new("synth", 0, 0);
    if (!md)
        goto error;
    printf("Mapper device created.\n");

    float mn=0, mx=1;
    mapper_signal sig = 
        mdev_add_input(md, "/mapped1", 1, 'f', 0, &mn, &mx, handler, 0);

    printf("Input signal /mapped1 registered.\n");

    printf("Number of inputs: %d\n", mdev_num_inputs(md));

    printf("Waiting for port/ordinal allocation..\n");
    int i;
    for (i = 0; i < 10; i++) {
        mdev_poll(md, 500);
        if (mdev_ready(md))
            break;
        usleep(500 * 1000);
    }
    if (i >= 10) {
        printf("Timed out waiting for signal name.\n");
        goto error;
    }
	
	char port[10];
	sprintf(port, "%i", md->admin->port);
	printf("using port = %s\n", port);
	
	lo_address a = lo_address_new("localhost", port);
    if (!a) {
        printf("Error creating lo_address for test.\n");
        return 1;
    }

    printf("Polling device..\n");
    for (i = 0; i < 10; i++) {
        lo_send(a, sig->props.name, "f", (float) i);
		printf("Updating signal %s to %f\n", sig->props.name, (float) i);
        sent++;
        mdev_poll(md, 500);
		//usleep(500 * 1000);
    }

    if (sent != received) {
        printf("Not all sent values were received.\n");
        printf("Sent %d values, but %d received.\n", sent, received);
        goto error;
    }
    if (sent == 0) {
        printf("Unable to send any values.\n");
        goto error;
    }
    printf("Sent and received %d values.\n", sent);

    mdev_free(md);
    lo_address_free(a);
    return 0;

  error:
    if (md)
        mdev_free(md);
    lo_address_free(a);
    return 1;
}