static void q35_host_initfn(Object *obj)
{
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
PCIHostState *phb = PCI_HOST_BRIDGE(obj);
memory_region_init_io(&phb->conf_mem, obj, &pci_host_conf_le_ops, phb,
"pci-conf-idx", 4);
memory_region_init_io(&phb->data_mem, obj, &pci_host_data_le_ops, phb,
"pci-conf-data", 4);
object_initialize(&s->mch, sizeof(s->mch), TYPE_MCH_PCI_DEVICE);
object_property_add_child(OBJECT(s), "mch", OBJECT(&s->mch), NULL);
qdev_prop_set_uint32(DEVICE(&s->mch), "addr", PCI_DEVFN(0, 0));
qdev_prop_set_bit(DEVICE(&s->mch), "multifunction", false);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_START, "int",
q35_host_get_pci_hole_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_END, "int",
q35_host_get_pci_hole_end,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_START, "int",
q35_host_get_pci_hole64_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_END, "int",
q35_host_get_pci_hole64_end,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCIE_HOST_MCFG_SIZE, "int",
q35_host_get_mmcfg_size,
NULL, NULL, NULL, NULL);
object_property_add_link(obj, MCH_HOST_PROP_RAM_MEM, TYPE_MEMORY_REGION,
(Object **) &s->mch.ram_memory,
qdev_prop_allow_set_link_before_realize, 0, NULL);
object_property_add_link(obj, MCH_HOST_PROP_PCI_MEM, TYPE_MEMORY_REGION,
(Object **) &s->mch.pci_address_space,
qdev_prop_allow_set_link_before_realize, 0, NULL);
object_property_add_link(obj, MCH_HOST_PROP_SYSTEM_MEM, TYPE_MEMORY_REGION,
(Object **) &s->mch.system_memory,
qdev_prop_allow_set_link_before_realize, 0, NULL);
object_property_add_link(obj, MCH_HOST_PROP_IO_MEM, TYPE_MEMORY_REGION,
(Object **) &s->mch.address_space_io,
qdev_prop_allow_set_link_before_realize, 0, NULL);
/* Leave enough space for the biggest MCFG BAR */
/* TODO: this matches current bios behaviour, but
* it's not a power of two, which means an MTRR
* can't cover it exactly.
*/
range_set_bounds(&s->mch.pci_hole,
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT + MCH_HOST_BRIDGE_PCIEXBAR_MAX,
IO_APIC_DEFAULT_ADDRESS - 1);
}
static void virtio_ccw_rng_initfn(Object *obj)
{
VirtioCcwDevice *dev = VIRTIO_CCW_DEVICE(obj);
object_property_add_link(obj, "rng", TYPE_RNG_BACKEND,
(Object **)&dev->rng.rng, NULL);
}
static void pxa2xx_pcmcia_initfn(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
PXA2xxPCMCIAState *s = PXA2XX_PCMCIA(obj);
memory_region_init(&s->container_mem, obj, "container", 0x10000000);
sysbus_init_mmio(sbd, &s->container_mem);
/* Socket I/O Memory Space */
memory_region_init_io(&s->iomem, NULL, &pxa2xx_pcmcia_io_ops, s,
"pxa2xx-pcmcia-io", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x00000000,
&s->iomem);
/* Then next 64 MB is reserved */
/* Socket Attribute Memory Space */
memory_region_init_io(&s->attr_iomem, NULL, &pxa2xx_pcmcia_attr_ops, s,
"pxa2xx-pcmcia-attribute", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x08000000,
&s->attr_iomem);
/* Socket Common Memory Space */
memory_region_init_io(&s->common_iomem, NULL, &pxa2xx_pcmcia_common_ops, s,
"pxa2xx-pcmcia-common", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x0c000000,
&s->common_iomem);
s->slot.irq = qemu_allocate_irq(pxa2xx_pcmcia_set_irq, s, 0);
object_property_add_link(obj, "card", TYPE_PCMCIA_CARD,
(Object **)&s->card,
NULL, /* read-only property */
0, NULL);
}
static void pmc_sss_realize(DeviceState *dev, Error **errp)
{
PMCSSS *s = PMC_SSS(dev);
SSSBase *p = SSS_BASE(dev);
Error *local_errp = NULL;
int r, i;
for (i = 0; i < R_MAX; ++i) {
DepRegisterInfo *r = &s->regs_info[i];
*r = (DepRegisterInfo) {
.data = (uint8_t *)&s->regs[i],
.data_size = sizeof(uint32_t),
.access = &pmc_sss_regs_info[i],
.debug = PMC_SSS_ERR_DEBUG,
.prefix = object_get_canonical_path(OBJECT(dev)),
.opaque = s,
};
memory_region_init_io(&r->mem, OBJECT(dev), &sss_ops, r,
"sss-regs", 4);
memory_region_add_subregion(&s->iomem, i * 4, &r->mem);
}
for (r = 0; r < NO_REMOTE; ++r) {
SSSStream *ss = SSS_STREAM(&p->rx_devs[r]);
object_property_add_link(OBJECT(ss), "sss", TYPE_PMC_SSS,
(Object **)&ss->sss,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&local_errp);
if (local_errp) {
goto pmc_sss_realize_fail;
}
object_property_set_link(OBJECT(ss), OBJECT(s), "sss", &local_errp);
if (local_errp) {
goto pmc_sss_realize_fail;
}
}
return;
pmc_sss_realize_fail:
if (!*errp) {
*errp = local_errp;
}
}
static void sss_reset(DeviceState *dev)
{
PMCSSS *s = PMC_SSS(dev);
SSSBase *p = SSS_BASE(dev);
int i;
for (i = 0; i < R_MAX; ++i) {
dep_register_reset(&s->regs_info[i]);
}
sss_notify_all(p);
}
static void virtio_ccw_rng_instance_init(Object *obj)
{
VirtIORNGCcw *dev = VIRTIO_RNG_CCW(obj);
object_initialize(OBJECT(&dev->vdev), TYPE_VIRTIO_RNG);
object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
object_property_add_link(obj, "rng", TYPE_RNG_BACKEND,
(Object **)&dev->vdev.conf.rng, NULL);
}
static void virtio_rng_initfn(Object *obj)
{
VirtIORNG *vrng = VIRTIO_RNG(obj);
object_property_add_link(obj, "rng", TYPE_RNG_BACKEND,
(Object **)&vrng->conf.rng,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE, NULL);
}
static void ivshmem_plain_init(Object *obj)
{
IVShmemState *s = IVSHMEM_PLAIN(obj);
object_property_add_link(obj, "memdev", TYPE_MEMORY_BACKEND,
(Object **)&s->hostmem,
ivshmem_check_memdev_is_busy,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
}
static void mem_ctrl_init(Object *obj)
{
MemCtrl *s = MEM_CTRL(obj);
/* Link to RAM memory region. */
object_property_add_link(obj, "mr", TYPE_MEMORY_REGION,
(Object **)&s->mr_link,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
}
static void pc_dimm_init(Object *obj)
{
PCDIMMDevice *dimm = PC_DIMM(obj);
object_property_add(obj, PC_DIMM_SIZE_PROP, "int", pc_dimm_get_size,
NULL, NULL, NULL, &error_abort);
object_property_add_link(obj, PC_DIMM_MEMDEV_PROP, TYPE_MEMORY_BACKEND,
(Object **)&dimm->hostmem,
pc_dimm_check_memdev_is_busy,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
}
static void attach(sPAPRDRConnector *drc, DeviceState *d, void *fdt,
int fdt_start_offset, bool coldplug, Error **errp)
{
trace_spapr_drc_attach(get_index(drc));
if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_ISOLATED) {
error_setg(errp, "an attached device is still awaiting release");
return;
}
if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) {
g_assert(drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_USABLE);
}
g_assert(fdt || coldplug);
/* NOTE: setting initial isolation state to UNISOLATED means we can't
* detach unless guest has a userspace/kernel that moves this state
* back to ISOLATED in response to an unplug event, or this is done
* manually by the admin prior. if we force things while the guest
* may be accessing the device, we can easily crash the guest, so we
* we defer completion of removal in such cases to the reset() hook.
*/
if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) {
drc->isolation_state = SPAPR_DR_ISOLATION_STATE_UNISOLATED;
}
drc->indicator_state = SPAPR_DR_INDICATOR_STATE_ACTIVE;
drc->dev = d;
drc->fdt = fdt;
drc->fdt_start_offset = fdt_start_offset;
drc->configured = coldplug;
/* 'logical' DR resources such as memory/cpus are in some cases treated
* as a pool of resources from which the guest is free to choose from
* based on only a count. for resources that can be assigned in this
* fashion, we must assume the resource is signalled immediately
* since a single hotplug request might make an arbitrary number of
* such attached resources available to the guest, as opposed to
* 'physical' DR resources such as PCI where each device/resource is
* signalled individually.
*/
drc->signalled = (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI)
? true : coldplug;
if (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI) {
drc->awaiting_allocation = true;
}
object_property_add_link(OBJECT(drc), "device",
object_get_typename(OBJECT(drc->dev)),
(Object **)(&drc->dev),
NULL, 0, NULL);
}
static void dummy_dev_init(Object *obj)
{
DummyDev *dev = DUMMY_DEV(obj);
DummyBus *bus = DUMMY_BUS(object_new(TYPE_DUMMY_BUS));
DummyBackend *backend = DUMMY_BACKEND(object_new(TYPE_DUMMY_BACKEND));
object_property_add_child(obj, "bus", OBJECT(bus), NULL);
dev->bus = bus;
object_property_add_child(OBJECT(bus), "backend", OBJECT(backend), NULL);
bus->backend = backend;
object_property_add_link(obj, "backend", TYPE_DUMMY_BACKEND,
(Object **)&bus->backend, NULL, 0, NULL);
}
static void macio_newworld_init(Object *obj)
{
MacIOState *s = MACIO(obj);
NewWorldMacIOState *ns = NEWWORLD_MACIO(obj);
int i;
object_property_add_link(obj, "pic", TYPE_OPENPIC,
(Object **) &ns->pic,
qdev_prop_allow_set_link_before_realize,
0, NULL);
for (i = 0; i < 2; i++) {
macio_init_ide(s, &ns->ide[i], sizeof(ns->ide[i]), i);
}
}
static void mips_gcr_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
MIPSGCRState *s = MIPS_GCR(obj);
object_property_add_link(obj, "cpc", TYPE_MEMORY_REGION,
(Object **)&s->cpc_mr,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
memory_region_init_io(&s->iomem, OBJECT(s), &gcr_ops, s,
"mips-gcr", GCR_ADDRSPACE_SZ);
sysbus_init_mmio(sbd, &s->iomem);
}
static void ss_init(Object *Obj)
{
SlaveBootInt *s = SBI(Obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(Obj);
object_property_add_link(Obj, "stream-connected-sbi", TYPE_STREAM_SLAVE,
(Object **) &s->tx_dev,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
NULL);
memory_region_init_io(&s->iomem, Obj, &ss_ops, s,
TYPE_SBI, R_MAX * 4);
sysbus_init_mmio(sbd, &s->iomem);
sysbus_init_irq(sbd, &s->irq);
}
static void bus_add_child(BusState *bus, DeviceState *child)
{
char name[32];
BusChild *kid = g_malloc0(sizeof(*kid));
kid->index = bus->max_index++;
kid->child = child;
object_ref(OBJECT(kid->child));
QTAILQ_INSERT_HEAD(&bus->children, kid, sibling);
/* This transfers ownership of kid->child to the property. */
snprintf(name, sizeof(name), "child[%d]", kid->index);
object_property_add_link(OBJECT(bus), name,
object_get_typename(OBJECT(child)),
(Object **)&kid->child,
NULL, /* read-only property */
0, /* return ownership on prop deletion */
NULL);
}
static void pmc_sss_init(Object *obj)
{
SSSBase *p = SSS_BASE(obj);
PMCSSS *s = PMC_SSS(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
char *name;
int remote;
p->sss_population = pmc_sss_population;
p->r_sss_shifts = r_pmc_cfg_sss_shifts;
p->r_sss_encodings = r_pmc_cfg_sss_encodings;
p->num_remotes = PMC_NUM_REMOTES;
p->notifys = g_new0(StreamCanPushNotifyFn, PMC_NUM_REMOTES);
p->notify_opaques = g_new0(void *, PMC_NUM_REMOTES);
p->get_sss_regfield = pmc_get_sss_regfield;
p->rx_devs = (SSSStream *) g_new(SSSStream, PMC_NUM_REMOTES);
p->tx_devs = (StreamSlave **) g_new0(StreamSlave *, PMC_NUM_REMOTES);
for (remote = 0 ; remote != NO_REMOTE; remote++) {
name = g_strdup_printf("stream-connected-%s",
pmc_sss_remote_names[remote]);
object_property_add_link(OBJECT(s), name, TYPE_STREAM_SLAVE,
(Object **)&p->tx_devs[remote],
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
NULL);
g_free(name);
object_initialize(&p->rx_devs[remote], sizeof(SSSStream),
TYPE_SSS_STREAM);
name = g_strdup_printf("stream-connected-%s-target",
pmc_sss_remote_names[remote]);
object_property_add_child(OBJECT(s), name,
(Object *)&p->rx_devs[remote], &error_abort);
g_free(name);
}
memory_region_init_io(&s->iomem, obj, &sss_ops, s,
"versal.pmc-stream-switch", R_MAX * 4);
sysbus_init_mmio(sbd, &s->iomem);
}
static void macio_oldworld_init(Object *obj)
{
MacIOState *s = MACIO(obj);
OldWorldMacIOState *os = OLDWORLD_MACIO(obj);
DeviceState *dev;
int i;
object_property_add_link(obj, "pic", TYPE_HEATHROW,
(Object **) &os->pic,
qdev_prop_allow_set_link_before_realize,
0, NULL);
object_initialize(&os->nvram, sizeof(os->nvram), TYPE_MACIO_NVRAM);
dev = DEVICE(&os->nvram);
qdev_prop_set_uint32(dev, "size", 0x2000);
qdev_prop_set_uint32(dev, "it_shift", 4);
for (i = 0; i < 2; i++) {
macio_init_ide(s, &os->ide[i], sizeof(os->ide[i]), i);
}
}
static void colo_compare_init(Object *obj)
{
CompareState *s = COLO_COMPARE(obj);
object_property_add_str(obj, "primary_in",
compare_get_pri_indev, compare_set_pri_indev,
NULL);
object_property_add_str(obj, "secondary_in",
compare_get_sec_indev, compare_set_sec_indev,
NULL);
object_property_add_str(obj, "outdev",
compare_get_outdev, compare_set_outdev,
NULL);
object_property_add_link(obj, "iothread", TYPE_IOTHREAD,
(Object **)&s->iothread,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, NULL);
s->vnet_hdr = false;
object_property_add_bool(obj, "vnet_hdr_support", compare_get_vnet_hdr,
compare_set_vnet_hdr, NULL);
}
static void attach(sPAPRDRConnector *drc, DeviceState *d, void *fdt,
int fdt_start_offset, bool coldplug, Error **errp)
{
DPRINTFN("drc: %x, attach", get_index(drc));
if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_ISOLATED) {
error_setg(errp, "an attached device is still awaiting release");
return;
}
if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) {
g_assert(drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_USABLE);
}
g_assert(fdt || coldplug);
/* NOTE: setting initial isolation state to UNISOLATED means we can't
* detach unless guest has a userspace/kernel that moves this state
* back to ISOLATED in response to an unplug event, or this is done
* manually by the admin prior. if we force things while the guest
* may be accessing the device, we can easily crash the guest, so we
* we defer completion of removal in such cases to the reset() hook.
*/
if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) {
drc->isolation_state = SPAPR_DR_ISOLATION_STATE_UNISOLATED;
}
drc->indicator_state = SPAPR_DR_INDICATOR_STATE_ACTIVE;
drc->dev = d;
drc->fdt = fdt;
drc->fdt_start_offset = fdt_start_offset;
drc->configured = coldplug;
object_property_add_link(OBJECT(drc), "device",
object_get_typename(OBJECT(drc->dev)),
(Object **)(&drc->dev),
NULL, 0, NULL);
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
PcGuestInfo *guest_info;
ram_addr_t lowmem;
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
* For old machine types, use whatever split we used historically to avoid
* breaking migration.
*/
if (machine->ram_size >= 0xe0000000) {
lowmem = gigabyte_align ? 0xc0000000 : 0xe0000000;
} else {
lowmem = 0xe0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pcms->max_ram_below_4g) {
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pcms->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
if (xen_enabled() && xen_hvm_init(pcms, &ram_memory) != 0) {
fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
exit(1);
}
pc_cpus_init(pcms);
if (kvm_enabled() && kvmclock_enabled) {
kvmclock_create();
}
if (pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
guest_info = pc_guest_info_init(pcms);
guest_info->has_acpi_build = has_acpi_build;
guest_info->legacy_acpi_table_size = legacy_acpi_table_size;
guest_info->isapc_ram_fw = !pci_enabled;
guest_info->has_reserved_memory = has_reserved_memory;
guest_info->rsdp_in_ram = rsdp_in_ram;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, smbios_legacy_mode, smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory, guest_info);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms, guest_info);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pci_enabled && usb_enabled()) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pci_enabled) {
pc_pci_device_init(pci_bus);
}
}
/* PC hardware initialisation */
static void pc_q35_init(MachineState *machine)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
Q35PCIHost *q35_host;
PCIHostState *phb;
PCIBus *host_bus;
PCIDevice *lpc;
DeviceState *lpc_dev;
BusState *idebus[MAX_SATA_PORTS];
ISADevice *rtc_state;
MemoryRegion *system_io = get_system_io();
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
MemoryRegion *ram_memory;
GSIState *gsi_state;
ISABus *isa_bus;
qemu_irq *i8259;
int i;
ICH9LPCState *ich9_lpc;
PCIDevice *ahci;
ram_addr_t lowmem;
DriveInfo *hd[MAX_SATA_PORTS];
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
* and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
* also known as MMCFG).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
*/
if (machine->ram_size >= 0xb0000000) {
lowmem = 0x80000000;
} else {
lowmem = 0xb0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (!pcms->max_ram_below_4g) {
pcms->max_ram_below_4g = 1ULL << 32; /* default: 4G */;
}
if (lowmem > pcms->max_ram_below_4g) {
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pcms->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
}
pc_cpus_init(pcms);
kvmclock_create();
/* pci enabled */
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = get_system_memory();
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (Q35 + ICH9, 2009)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, get_system_memory(),
rom_memory, &ram_memory);
}
/* irq lines */
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pcmc->pci_enabled);
pcms->gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
pcms->gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
/* create pci host bus */
q35_host = Q35_HOST_DEVICE(qdev_create(NULL, TYPE_Q35_HOST_DEVICE));
object_property_add_child(qdev_get_machine(), "q35", OBJECT(q35_host), NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(ram_memory),
MCH_HOST_PROP_RAM_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(pci_memory),
MCH_HOST_PROP_PCI_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(get_system_memory()),
MCH_HOST_PROP_SYSTEM_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(system_io),
MCH_HOST_PROP_IO_MEM, NULL);
object_property_set_int(OBJECT(q35_host), pcms->below_4g_mem_size,
PCI_HOST_BELOW_4G_MEM_SIZE, NULL);
object_property_set_int(OBJECT(q35_host), pcms->above_4g_mem_size,
PCI_HOST_ABOVE_4G_MEM_SIZE, NULL);
/* pci */
qdev_init_nofail(DEVICE(q35_host));
phb = PCI_HOST_BRIDGE(q35_host);
host_bus = phb->bus;
/* create ISA bus */
lpc = pci_create_simple_multifunction(host_bus, PCI_DEVFN(ICH9_LPC_DEV,
ICH9_LPC_FUNC), true,
TYPE_ICH9_LPC_DEVICE);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(lpc),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
ich9_lpc = ICH9_LPC_DEVICE(lpc);
lpc_dev = DEVICE(lpc);
for (i = 0; i < GSI_NUM_PINS; i++) {
qdev_connect_gpio_out_named(lpc_dev, ICH9_GPIO_GSI, i, pcms->gsi[i]);
}
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc_map_irq, ich9_lpc,
ICH9_LPC_NB_PIRQS);
pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
isa_bus = ich9_lpc->isa_bus;
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "q35");
}
pc_register_ferr_irq(pcms->gsi[13]);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, pcms->gsi, &rtc_state, !mc->no_floppy,
(pcms->vmport != ON_OFF_AUTO_ON), 0xff0104);
/* connect pm stuff to lpc */
ich9_lpc_pm_init(lpc, pc_machine_is_smm_enabled(pcms));
/* ahci and SATA device, for q35 1 ahci controller is built-in */
ahci = pci_create_simple_multifunction(host_bus,
PCI_DEVFN(ICH9_SATA1_DEV,
ICH9_SATA1_FUNC),
true, "ich9-ahci");
idebus[0] = qdev_get_child_bus(&ahci->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&ahci->qdev, "ide.1");
g_assert(MAX_SATA_PORTS == ICH_AHCI(ahci)->ahci.ports);
ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
ahci_ide_create_devs(ahci, hd);
if (machine_usb(machine)) {
/* Should we create 6 UHCI according to ich9 spec? */
ehci_create_ich9_with_companions(host_bus, 0x1d);
}
/* TODO: Populate SPD eeprom data. */
smbus_eeprom_init(ich9_smb_init(host_bus,
PCI_DEVFN(ICH9_SMB_DEV, ICH9_SMB_FUNC),
0xb100),
8, NULL, 0);
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
/* the rest devices to which pci devfn is automatically assigned */
pc_vga_init(isa_bus, host_bus);
pc_nic_init(isa_bus, host_bus);
if (pcmc->pci_enabled) {
pc_pci_device_init(host_bus);
}
if (pcms->acpi_nvdimm_state.is_enabled) {
nvdimm_init_acpi_state(&pcms->acpi_nvdimm_state, system_io,
pcms->fw_cfg, OBJECT(pcms));
}
}
/* PC hardware initialisation */
static void pc_q35_init(MachineState *machine)
{
PCMachineState *pc_machine = PC_MACHINE(machine);
ram_addr_t below_4g_mem_size, above_4g_mem_size;
Q35PCIHost *q35_host;
PCIHostState *phb;
PCIBus *host_bus;
PCIDevice *lpc;
BusState *idebus[MAX_SATA_PORTS];
ISADevice *rtc_state;
ISADevice *floppy;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
MemoryRegion *ram_memory;
GSIState *gsi_state;
ISABus *isa_bus;
int pci_enabled = 1;
qemu_irq *cpu_irq;
qemu_irq *gsi;
qemu_irq *i8259;
int i;
ICH9LPCState *ich9_lpc;
PCIDevice *ahci;
DeviceState *icc_bridge;
PcGuestInfo *guest_info;
ram_addr_t lowmem;
DriveInfo *hd[MAX_SATA_PORTS];
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
* and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
* also known as MMCFG).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
* For old machine types, use whatever split we used historically to avoid
* breaking migration.
*/
if (machine->ram_size >= 0xb0000000) {
lowmem = gigabyte_align ? 0x80000000 : 0xb0000000;
} else {
lowmem = 0xb0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pc_machine->max_ram_below_4g) {
lowmem = pc_machine->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pc_machine->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
above_4g_mem_size = machine->ram_size - lowmem;
below_4g_mem_size = lowmem;
} else {
above_4g_mem_size = 0;
below_4g_mem_size = machine->ram_size;
}
if (xen_enabled() && xen_hvm_init(&below_4g_mem_size, &above_4g_mem_size,
&ram_memory) != 0) {
fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
exit(1);
}
icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
object_property_add_child(qdev_get_machine(), "icc-bridge",
OBJECT(icc_bridge), NULL);
pc_cpus_init(machine->cpu_model, icc_bridge);
pc_acpi_init("q35-acpi-dsdt.aml");
kvmclock_create();
/* pci enabled */
if (pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = get_system_memory();
}
guest_info = pc_guest_info_init(below_4g_mem_size, above_4g_mem_size);
guest_info->isapc_ram_fw = false;
guest_info->has_acpi_build = has_acpi_build;
guest_info->has_reserved_memory = has_reserved_memory;
guest_info->rsdp_in_ram = rsdp_in_ram;
/* Migration was not supported in 2.0 for Q35, so do not bother
* with this hack (see hw/i386/acpi-build.c).
*/
guest_info->legacy_acpi_table_size = 0;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (Q35 + ICH9, 2009)",
mc->name, smbios_legacy_mode, smbios_uuid_encoded);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(machine, get_system_memory(),
below_4g_mem_size, above_4g_mem_size,
rom_memory, &ram_memory, guest_info);
}
/* irq lines */
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_irqchip_in_kernel()) {
kvm_pc_setup_irq_routing(pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
/* create pci host bus */
q35_host = Q35_HOST_DEVICE(qdev_create(NULL, TYPE_Q35_HOST_DEVICE));
object_property_add_child(qdev_get_machine(), "q35", OBJECT(q35_host), NULL);
q35_host->mch.ram_memory = ram_memory;
q35_host->mch.pci_address_space = pci_memory;
q35_host->mch.system_memory = get_system_memory();
q35_host->mch.address_space_io = get_system_io();
q35_host->mch.below_4g_mem_size = below_4g_mem_size;
q35_host->mch.above_4g_mem_size = above_4g_mem_size;
q35_host->mch.guest_info = guest_info;
/* pci */
qdev_init_nofail(DEVICE(q35_host));
phb = PCI_HOST_BRIDGE(q35_host);
host_bus = phb->bus;
/* create ISA bus */
lpc = pci_create_simple_multifunction(host_bus, PCI_DEVFN(ICH9_LPC_DEV,
ICH9_LPC_FUNC), true,
TYPE_ICH9_LPC_DEVICE);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pc_machine->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(lpc),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
ich9_lpc = ICH9_LPC_DEVICE(lpc);
ich9_lpc->pic = gsi;
ich9_lpc->ioapic = gsi_state->ioapic_irq;
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc_map_irq, ich9_lpc,
ICH9_LPC_NB_PIRQS);
pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
isa_bus = ich9_lpc->isa_bus;
/*end early*/
isa_bus_irqs(isa_bus, gsi);
if (kvm_irqchip_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
cpu_irq = pc_allocate_cpu_irq();
i8259 = i8259_init(isa_bus, cpu_irq[0]);
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
if (pci_enabled) {
ioapic_init_gsi(gsi_state, "q35");
}
qdev_init_nofail(icc_bridge);
pc_register_ferr_irq(gsi[13]);
assert(pc_machine->vmport != ON_OFF_AUTO_MAX);
if (pc_machine->vmport == ON_OFF_AUTO_AUTO) {
pc_machine->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, &floppy,
(pc_machine->vmport != ON_OFF_AUTO_ON), 0xff0104);
/* connect pm stuff to lpc */
ich9_lpc_pm_init(lpc);
/* ahci and SATA device, for q35 1 ahci controller is built-in */
ahci = pci_create_simple_multifunction(host_bus,
PCI_DEVFN(ICH9_SATA1_DEV,
ICH9_SATA1_FUNC),
true, "ich9-ahci");
idebus[0] = qdev_get_child_bus(&ahci->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&ahci->qdev, "ide.1");
g_assert(MAX_SATA_PORTS == ICH_AHCI(ahci)->ahci.ports);
ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
ahci_ide_create_devs(ahci, hd);
if (usb_enabled()) {
/* Should we create 6 UHCI according to ich9 spec? */
ehci_create_ich9_with_companions(host_bus, 0x1d);
}
/* TODO: Populate SPD eeprom data. */
smbus_eeprom_init(ich9_smb_init(host_bus,
PCI_DEVFN(ICH9_SMB_DEV, ICH9_SMB_FUNC),
0xb100),
8, NULL, 0);
pc_cmos_init(below_4g_mem_size, above_4g_mem_size, machine->boot_order,
machine, floppy, idebus[0], idebus[1], rtc_state);
/* the rest devices to which pci devfn is automatically assigned */
pc_vga_init(isa_bus, host_bus);
pc_nic_init(isa_bus, host_bus);
if (pci_enabled) {
pc_pci_device_init(host_bus);
}
}
static void rpu_realize(DeviceState *dev, Error **errp)
{
RPU *s = XILINX_RPU(dev);
const char *prefix = object_get_canonical_path(OBJECT(dev));
unsigned int i;
for (i = 0; i < ARRAY_SIZE(rpu_regs_info); ++i) {
RegisterInfo *r = &s->regs_info[rpu_regs_info[i].decode.addr/4];
*r = (RegisterInfo) {
.data = (uint8_t *)&s->regs[
rpu_regs_info[i].decode.addr/4],
.data_size = sizeof(uint32_t),
.access = &rpu_regs_info[i],
.debug = XILINX_RPU_ERR_DEBUG,
.prefix = prefix,
.opaque = s,
};
register_init(r);
qdev_pass_all_gpios(DEVICE(r), dev);
}
if (!s->atcm1_for_rpu0) {
error_set(errp, QERR_MISSING_PARAMETER, "atcm1-for-rpu0");
return;
}
if (!s->btcm1_for_rpu0) {
error_set(errp, QERR_MISSING_PARAMETER, "btcm1-for-rpu0");
return;
}
if (!s->icache_for_rpu1) {
error_set(errp, QERR_MISSING_PARAMETER, "icache-for-rpu1");
return;
}
if (!s->dcache_for_rpu1) {
error_set(errp, QERR_MISSING_PARAMETER, "dcache-for-rpu1");
return;
}
if (!s->ddr) {
error_set(errp, QERR_MISSING_PARAMETER, "ddr-mem-for-rpu");
return;
}
/* RPUs starts in lockstep mode, so the rpu1 caches are not accessible. */
memory_region_set_enabled(s->icache_for_rpu1, false);
memory_region_set_enabled(s->dcache_for_rpu1, false);
memory_region_set_enabled(s->ddr, false);
}
static void rpu_init(Object *obj)
{
RPU *s = XILINX_RPU(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
memory_region_init_io(&s->iomem, obj, &rpu_ops, s,
TYPE_XILINX_RPU, R_MAX * 4);
sysbus_init_mmio(sbd, &s->iomem);
sysbus_init_irq(sbd, &s->irq_rpu_1);
sysbus_init_irq(sbd, &s->irq_rpu_0);
/* xtcm1-for-rpu0 are the aliases for the tcm in lockstep mode.
* This link allows to enable/disable those aliases when we are in
* lock-step/normal mode.
*/
object_property_add_link(obj, "atcm1-for-rpu0", TYPE_MEMORY_REGION,
(Object **)&s->atcm1_for_rpu0,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
object_property_add_link(obj, "btcm1-for-rpu0", TYPE_MEMORY_REGION,
(Object **)&s->btcm1_for_rpu0,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
object_property_add_link(obj, "rpu1-for-main-bus", TYPE_MEMORY_REGION,
(Object **)&s->atcm1_for_rpu0,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
/* This link allows to enable/disable those memory region when we are in
* lock-step/normal mode.
*/
object_property_add_link(obj, "icache-for-rpu1", TYPE_MEMORY_REGION,
(Object **)&s->icache_for_rpu1,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
object_property_add_link(obj, "dcache-for-rpu1", TYPE_MEMORY_REGION,
(Object **)&s->dcache_for_rpu1,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
/* Link to the second part of the DDR which is enabled in split mode and
* disabled in lockstep mode.
*/
object_property_add_link(obj, "ddr-mem-for-rpu", TYPE_MEMORY_REGION,
(Object **)&s->ddr,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
/* wfi_out is used to connect to PMU GPIs. */
qdev_init_gpio_out_named(DEVICE(obj), s->wfi_out, "wfi_out", 2);
/* wfi_in is used as input from CPUs as wfi request. */
qdev_init_gpio_in_named(DEVICE(obj), zynqmp_rpu_0_handle_wfi, "wfi_in_0", 1);
qdev_init_gpio_in_named(DEVICE(obj), zynqmp_rpu_1_handle_wfi, "wfi_in_1", 1);
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
ram_addr_t lowmem;
/*
* Calculate ram split, for memory below and above 4G. It's a bit
* complicated for backward compatibility reasons ...
*
* - Traditional split is 3.5G (lowmem = 0xe0000000). This is the
* default value for max_ram_below_4g now.
*
* - Then, to gigabyte align the memory, we move the split to 3G
* (lowmem = 0xc0000000). But only in case we have to split in
* the first place, i.e. ram_size is larger than (traditional)
* lowmem. And for new machine types (gigabyte_align = true)
* only, for live migration compatibility reasons.
*
* - Next the max-ram-below-4g option was added, which allowed to
* reduce lowmem to a smaller value, to allow a larger PCI I/O
* window below 4G. qemu doesn't enforce gigabyte alignment here,
* but prints a warning.
*
* - Finally max-ram-below-4g got updated to also allow raising lowmem,
* so legacy non-PAE guests can get as much memory as possible in
* the 32bit address space below 4G.
*
* - Note that Xen has its own ram setp code in xen_ram_init(),
* called via xen_hvm_init().
*
* Examples:
* qemu -M pc-1.7 -m 4G (old default) -> 3584M low, 512M high
* qemu -M pc -m 4G (new default) -> 3072M low, 1024M high
* qemu -M pc,max-ram-below-4g=2G -m 4G -> 2048M low, 2048M high
* qemu -M pc,max-ram-below-4g=4G -m 3968M -> 3968M low (=4G-128M)
*/
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
} else {
if (!pcms->max_ram_below_4g) {
pcms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
}
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size >= pcms->max_ram_below_4g) {
if (pcmc->gigabyte_align) {
if (lowmem > 0xc0000000) {
lowmem = 0xc0000000;
}
if (lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g "
"(%" PRIu64 ") not a multiple of 1G; "
"possible bad performance.",
pcms->max_ram_below_4g);
}
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
}
pc_cpus_init(pcms);
if (kvm_enabled() && pcmc->kvmclock_enabled) {
kvmclock_create();
}
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pcmc->pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pcmc->pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
pcms->bus = pci_bus;
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io,
&error_abort);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pcmc->pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pcmc->pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pcmc->pci_enabled && machine_usb(machine)) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pcmc->pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pcmc->pci_enabled) {
pc_pci_device_init(pci_bus);
}
if (pcms->acpi_nvdimm_state.is_enabled) {
nvdimm_init_acpi_state(&pcms->acpi_nvdimm_state, system_io,
pcms->fw_cfg, OBJECT(pcms));
}
}
