BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run.
Normally we would just call portRESTORE_CONTEXT() here, but as the IAR
compiler does not fully support inline assembler we have to make a call.*/
vPortStart();
/* Should not get here! */
return pdTRUE;
}
portBASE_TYPE
xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt( );
/* Start the first task. */
vPortISRStartFirstTask( );
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
portBASE_TYPE xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
asm volatile ( " movia r2, restore_sp_from_pxCurrentTCB \n"
" jmp r2 " );
/* Should not get here! */
return 0;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
//loop_led(); // simpan sini LANCAR
/* Start the first task. */
vPortISRStartFirstTask(); // --> portRESTORE_CONTEXT();
// ada di file source/portable/GCC/ARM7_LPC23xx/portISR.c
//loop_led(); // simpan sini MATI
/* Should not get here! */
return 0;
}
BaseType_t xPortStartScheduler( void )
{
extern void ( __FreeRTOS_interrupt_handler )( void );
extern void ( vStartFirstTask )( void );
/* Setup the FreeRTOS interrupt handler. */
/*
__asm__ volatile ( "la r6, r0, __FreeRTOS_interrupt_handler \n\t" \
"swi r6, r1, 4 \n\t" \
"lhui r7, r1, 4 \n\t" \
"ori r7, r7, 0xB0000000 \n\t" \
"swi r7, r0, 0x10 \n\t" \
"swi r7, r0, 0x18 \n\t" \
"andi r6, r6, 0xFFFF \n\t" \
"ori r6, r6, 0xB8080000 \n\t" \
"swi r6, r0, 0x14 \n\t" \
"swi r6, r0, 0x1C " );
*/
volatile uint32_t *p = (volatile uint32_t *)0x10;
uint32_t addr = (uint32_t)__FreeRTOS_interrupt_handler;
*p++ = (0xB0000000 | (addr >> 16));
*p++ = (0xB8080000 | (addr & 0xFFFF));
*p++ = (0xB0000000 | (addr >> 16));
*p++ = (0xB8080000 | (addr & 0xFFFF));
/* Setup the hardware to generate the tick. Interrupts are disabled when
this function is called. */
prvSetupTimerInterrupt();
/* Allocate the stack to be used by the interrupt handler. */
pulISRStack = ( uint32_t * ) pvPortMalloc( configMINIMAL_STACK_SIZE * sizeof( StackType_t ) );
/* Restore the context of the first task that is going to run. */
if( pulISRStack != NULL )
{
/* Fill the ISR stack with a known value to facilitate debugging. */
memset( pulISRStack, portISR_STACK_FILL_VALUE, configMINIMAL_STACK_SIZE * sizeof( StackType_t ) );
pulISRStack += ( configMINIMAL_STACK_SIZE - 1 );
portENABLE_INTERRUPTS();
/* Kick off the first task. */
vStartFirstTask();
}
/* Should not get here as the tasks are now running! */
return pdFALSE;
}
BaseType_t xPortStartScheduler( void )
{
/* Set-up the timer interrupt. */
prvSetupTimerInterrupt();
/* Integrated Interrupt Controller: Enable all interrupts. */
ic->ien = 1;
/* Restore callee saved registers. */
portRESTORE_CONTEXT();
/* Should not get here. */
return 0;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Setup a timer for the tick ISR is using the preemptive scheduler. */
prvSetupTimerInterrupt();
/* Restore the context of the first task to run. */
portRESTORE_CONTEXT();
/* Should not get here. Use the function name to stop compiler warnings. */
( void ) prvLowInterrupt;
( void ) prvTickISR;
return pdTRUE;
}
BaseType_t xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
vPortStartFirstTask();
/* Should not get here! */
return 0;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Setup a timer for the tick ISR. */
prvSetupTimerInterrupt();
/* Restore the context of the first task to run. */
portRESTORE_CONTEXT();
/* Simulate the end of the yield function. */
asm volatile ( "return" );
/* Should not reach here. */
return pdTRUE;
}
BaseType_t xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
ulCriticalNesting = 0UL;
/* Configure a timer to generate the tick interrupt. */
prvSetupTimerInterrupt();
/* Start the first task executing. */
vPortStartFirstTask();
return pdFALSE;
}
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler(void)
{
/* Start the timer that generates the tick ISR. */
prvSetupTimerInterrupt();
/* Reset the critical section nesting count read to execute the first task. */
ulCriticalNesting = 0;
/* Start the first task. This is done from portASM.asm as ARM mode must be
used. */
vPortStartFirstTask();
/* Should not get here! */
return pdFAIL;
}
static portBASE_TYPE xBankedStartScheduler( void )
{
/* Configure the timer that will generate the RTOS tick. Interrupts are
disabled when this function is called. */
prvSetupTimerInterrupt();
/* Restore the context of the first task. */
portRESTORE_CONTEXT();
/* Simulate the end of an interrupt to start the scheduler off. */
__asm( "rti" );
/* Should not get here! */
return pdFALSE;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
/* Simulate a function call end as generated by the compiler. We will now
jump to the start of the task the context of which we have just restored. */
asm volatile ( "ret" );
/* Should not get here. */
return pdTRUE;
}
/*
* See header file for description.
*/
portBASE_TYPE xPortStartScheduler( void )
{
portBASE_TYPE xResult;
int iSignal;
sigset_t xSignals;
sigset_t xSignalToBlock;
sigset_t xSignalsBlocked;
portLONG lIndex;
/* Establish the signals to block before they are needed. */
sigfillset( &xSignalToBlock );
/* Block until the end */
(void)pthread_sigmask( SIG_SETMASK, &xSignalToBlock, &xSignalsBlocked );
for ( lIndex = 0; lIndex < MAX_NUMBER_OF_TASKS; lIndex++ )
{
pxThreads[ lIndex ].uxCriticalNesting = 0;
}
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. Will not return unless all threads are killed. */
vPortStartFirstTask();
/* This is the end signal we are looking for. */
sigemptyset( &xSignals );
sigaddset( &xSignals, SIG_RESUME );
while ( pdTRUE != xSchedulerEnd )
{
if ( 0 != sigwait( &xSignals, &iSignal ) )
{
printf( "Main thread spurious signal: %d\n", iSignal );
}
}
printf( "Cleaning Up, Exiting.\n" );
/* Cleanup the mutexes */
xResult = pthread_mutex_destroy( &xSuspendResumeThreadMutex );
xResult = pthread_mutex_destroy( &xSingleThreadMutex );
vPortFree( (void *)pxThreads );
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler( void )
{
/* Setup timer 2 to generate the RTOS tick. */
prvSetupTimerInterrupt();
/* Make sure we start with the expected SFR page. This line should not
really be required. */
SFRPAGE = 0;
/* Copy the stack for the first task to execute from XRAM into the stack,
restore the task context from the new stack, then start running the task. */
portCOPY_XRAM_TO_STACK();
portRESTORE_CONTEXT();
/* Should never get here! */
return pdTRUE;
}
BaseType_t xPortStartScheduler( void )
{
/* This is called with interrupts already disabled. */
/* Put our manual switch (yield) function on a known
vector. */
setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );
/* Setup the tick interrupt. */
prvSetupTimerInterrupt();
/* Kick off the scheduler by setting up the context of the first task. */
portFIRST_CONTEXT();
/* Should not get here! */
return pdFALSE;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. */
#pragma asm
RestoreContext
#pragma endasm
/* Simulate a function call end as generated by the compiler. We will now
jump to the start of the task the context of which we have just restored. */
__asm(" reti ");
/* Should not get here. */
return pdFAIL;
}
BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. Interrupts are disabled when
this function is called. */
configSETUP_TICK_INTERRUPT();
/* Restore the context of the first task that is going to run. */
vPortStartFirstTask();
/* Execution should not reach here as the tasks are now running!
prvSetupTimerInterrupt() is called here to prevent the compiler outputting
a warning about a statically declared function not being referenced in the
case that the application writer has provided their own tick interrupt
configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
their own routine will be called in place of prvSetupTimerInterrupt()). */
prvSetupTimerInterrupt();
return pdTRUE;
}
portBASE_TYPE xPortStartScheduler( void )
{
/* Set-up the timer interrupt. */
prvSetupTimerInterrupt();
/* Enable the TRAP yield. */
irq[ portIRQ_TRAP_YIELD ].ien = 1;
irq[ portIRQ_TRAP_YIELD ].ipl = portKERNEL_INTERRUPT_PRIORITY_LEVEL;
/* Integrated Interrupt Controller: Enable all interrupts. */
ic->ien = 1;
/* Restore callee saved registers. */
portRESTORE_CONTEXT();
/* Should not get here. */
return 0;
}
/*
* See header file for description.
*/
portBASE_TYPE xPortStartScheduler( void )
{
/* Make PendSV, CallSV and SysTick the same priroity as the kernel. */
*(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
*(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Start the first task. */
vPortStartFirstTask();
/* Should not get here! */
return 0;
}
portBASE_TYPE xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
extern void *pxCurrentTCB;
/* Setup the software interrupt. */
mConfigIntCoreSW0( CSW_INT_ON | CSW_INT_PRIOR_1 | CSW_INT_SUB_PRIOR_0 );
/* Setup the timer to generate the tick. Interrupts will have been
disabled by the time we get here. */
prvSetupTimerInterrupt();
/* Kick off the highest priority task that has been created so far.
Its stack location is loaded into uxSavedTaskStackPointer. */
uxSavedTaskStackPointer = *( unsigned portBASE_TYPE * ) pxCurrentTCB;
vPortStartFirstTask();
/* Should never get here as the tasks will now be executing. */
return pdFALSE;
}
BaseType_t xPortStartScheduler( void )
{
/* Use pxCurrentTCB just so it does not get optimised away. */
if( pxCurrentTCB != NULL )
{
/* Call an application function to set up the timer that will generate
the tick interrupt. This way the application can decide which
peripheral to use. If tickless mode is used then the default
implementation defined in this file (which uses CMT0) should not be
overridden. */
configSETUP_TICK_INTERRUPT();
/* Enable the software interrupt. */
_IEN( _ICU_SWINT ) = 1;
/* Ensure the software interrupt is clear. */
_IR( _ICU_SWINT ) = 0;
/* Ensure the software interrupt is set to the kernel priority. */
_IPR( _ICU_SWINT ) = configKERNEL_INTERRUPT_PRIORITY;
/* Start the first task. */
prvStartFirstTask();
}
/* Execution should not reach here as the tasks are now running!
prvSetupTimerInterrupt() is called here to prevent the compiler outputting
a warning about a statically declared function not being referenced in the
case that the application writer has provided their own tick interrupt
configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
their own routine will be called in place of prvSetupTimerInterrupt()). */
prvSetupTimerInterrupt();
/* Just to make sure the function is not optimised away. */
( void ) vSoftwareInterruptISR();
/* Should not get here. */
return pdFAIL;
}
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Start the first task. */
vPortStartFirstTask();
/* Should never get here as the tasks will now be executing! Call the task
exit error function to prevent compiler warnings about a static function
not being called in the case that the application writer overrides this
functionality by defining configTASK_RETURN_ADDRESS. */
prvTaskExitError();
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
portBASE_TYPE xPortStartScheduler( void )
{
/* Make PendSV and SysTick the same priroity as the kernel. */
*(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
*(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
/* Configure the regions in the MPU that are common to all tasks. */
prvSetupMPU();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Start the first task. */
__asm volatile( " svc %0 \n"
:: "i" (portSVC_START_SCHEDULER) );
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
portBASE_TYPE xPortStartScheduler( void )
{
/* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY );
/* Make PendSV, CallSV and SysTick the same priroity as the kernel. */
*(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
*(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Start the first task. */
prvPortStartFirstTask();
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler( void )
{
/* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See
http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) );
/* Make PendSV and SysTick the same priority as the kernel. */
*(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
*(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Start the first task. */
__asm volatile( " svc %0 \n"
:: "i" (portSVC_START_SCHEDULER) );
/* Should not get here! */
return 0;
}
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler( void )
{
/* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See
http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) );
#if( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
volatile uint8_t ucMaxPriorityValue;
/* Determine the maximum priority from which ISR safe FreeRTOS API
functions can be called. ISR safe functions are those that end in
"FromISR". FreeRTOS maintains separate thread and ISR API functions to
ensure interrupt entry is as fast and simple as possible.
Save the interrupt priority value that is about to be clobbered. */
ulOriginalPriority = *pucFirstUserPriorityRegister;
/* Determine the number of priority bits available. First write to all
possible bits. */
*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = *pucFirstUserPriorityRegister;
/* Use the same mask on the maximum system call priority. */
ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
/* Calculate the maximum acceptable priority group value for the number
of bits read back. */
ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
{
ulMaxPRIGROUPValue--;
ucMaxPriorityValue <<= ( uint8_t ) 0x01;
}
/* Shift the priority group value back to its position within the AIRCR
register. */
ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
/* Restore the clobbered interrupt priority register to its original
value. */
*pucFirstUserPriorityRegister = ulOriginalPriority;
}
#endif /* conifgASSERT_DEFINED */
/* Make PendSV and SysTick the same priority as the kernel, and the SVC
handler higher priority so it can be used to exit a critical section (where
lower priorities are masked). */
portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
/* Configure the regions in the MPU that are common to all tasks. */
prvSetupMPU();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Initialise the critical nesting count ready for the first task. */
uxCriticalNesting = 0;
/* Ensure the VFP is enabled - it should be anyway. */
vPortEnableVFP();
/* Lazy save always. */
*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
/* Start the first task. */
prvStartFirstTask();
/* Should not get here! */
return 0;
}
int32_t xPortStartScheduler( void )
{
extern void vTrapInstallHandlers( void );
uint32_t ulMFCR = 0UL;
uint32_t *pulUpperCSA = NULL;
uint32_t *pulLowerCSA = NULL;
/* Interrupts at or below configMAX_SYSCALL_INTERRUPT_PRIORITY are disable
when this function is called. */
/* Set-up the timer interrupt. */
prvSetupTimerInterrupt();
/* Install the Trap Handlers. */
vTrapInstallHandlers();
/* Install the Syscall Handler for yield calls. */
if( 0 == _install_trap_handler( portSYSCALL_TRAP, prvTrapYield ) )
{
/* Failed to install the yield handler, force an assert. */
configASSERT( ( ( volatile void * ) NULL ) );
}
/* Enable then install the priority 1 interrupt for pending context
switches from an ISR. See mod_SRC in the TriCore manual. */
CPU_SRC0.reg = ( portENABLE_CPU_INTERRUPT ) | ( configKERNEL_YIELD_PRIORITY );
if( 0 == _install_int_handler( configKERNEL_YIELD_PRIORITY, prvInterruptYield, 0 ) )
{
/* Failed to install the yield handler, force an assert. */
configASSERT( ( ( volatile void * ) NULL ) );
}
_disable();
/* Load the initial SYSCON. */
_mtcr( $SYSCON, portINITIAL_SYSCON );
_isync();
/* ENDINIT has already been applied in the 'cstart.c' code. */
/* Clear the PSW.CDC to enable the use of an RFE without it generating an
exception because this code is not genuinely in an exception. */
ulMFCR = _mfcr( $PSW );
ulMFCR &= portRESTORE_PSW_MASK;
_dsync();
_mtcr( $PSW, ulMFCR );
_isync();
/* Finally, perform the equivalent of a portRESTORE_CONTEXT() */
pulLowerCSA = portCSA_TO_ADDRESS( ( *pxCurrentTCB ) );
pulUpperCSA = portCSA_TO_ADDRESS( pulLowerCSA[0] );
_dsync();
_mtcr( $PCXI, *pxCurrentTCB );
_isync();
_nop();
_rslcx();
_nop();
/* Return to the first task selected to execute. */
__asm volatile( "rfe" );
/* Will not get here. */
return 0;
}
