void __init
setup_arch (char **cmdline_p)
{
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE);
efi_init();
io_port_init();
#ifdef CONFIG_IA64_GENERIC
machvec_init(acpi_get_sysname());
#endif
if (early_console_setup(*cmdline_p) == 0)
mark_bsp_online();
#ifdef CONFIG_ACPI_BOOT
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
cpu_init(); /* initialize the bootstrap CPU */
#ifdef CONFIG_ACPI_BOOT
acpi_boot_init();
#endif
#ifdef CONFIG_VT
if (!conswitchp) {
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
}
#endif
/* enable IA-64 Machine Check Abort Handling unless disabled */
if (!strstr(saved_command_line, "nomca"))
ia64_mca_init();
platform_setup(cmdline_p);
paging_init();
}
void __init
setup_arch (char **cmdline_p)
{
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE);
efi_init();
io_port_init();
parse_early_param();
#ifdef CONFIG_IA64_GENERIC
machvec_init(NULL);
#endif
if (early_console_setup(*cmdline_p) == 0)
mark_bsp_online();
#ifdef CONFIG_ACPI
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
ia64_setup_printk_clock();
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
cpu_set(0, cpu_sibling_map[0]);
cpu_set(0, cpu_core_map[0]);
check_for_logical_procs();
if (smp_num_cpucores > 1)
printk(KERN_INFO
"cpu package is Multi-Core capable: number of cores=%d\n",
smp_num_cpucores);
if (smp_num_siblings > 1)
printk(KERN_INFO
"cpu package is Multi-Threading capable: number of siblings=%d\n",
smp_num_siblings);
#endif
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
#ifdef CONFIG_VT
if (!conswitchp) {
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
}
#endif
/* enable IA-64 Machine Check Abort Handling unless disabled */
if (!nomca)
ia64_mca_init();
platform_setup(cmdline_p);
paging_init();
}
int __init acpi_boot_init(void)
{
/*
* MADT
* ----
* Parse the Multiple APIC Description Table (MADT), if exists.
* Note that this table provides platform SMP configuration
* information -- the successor to MPS tables.
*/
if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
printk(KERN_ERR PREFIX "Can't find MADT\n");
goto skip_madt;
}
/* Local APIC */
if (acpi_table_parse_madt
(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
printk(KERN_ERR PREFIX
"Error parsing LAPIC address override entry\n");
if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS)
< 1)
printk(KERN_ERR PREFIX
"Error parsing MADT - no LAPIC entries\n");
if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
< 0)
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* I/O APIC */
if (acpi_table_parse_madt
(ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
if (!ia64_platform_is("sn2"))
printk(KERN_ERR PREFIX
"Error parsing MADT - no IOSAPIC entries\n");
}
/* System-Level Interrupt Routing */
if (acpi_table_parse_madt
(ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
printk(KERN_ERR PREFIX
"Error parsing platform interrupt source entry\n");
if (acpi_table_parse_madt
(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
printk(KERN_ERR PREFIX
"Error parsing interrupt source overrides entry\n");
if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
skip_madt:
/*
* FADT says whether a legacy keyboard controller is present.
* The FADT also contains an SCI_INT line, by which the system
* gets interrupts such as power and sleep buttons. If it's not
* on a Legacy interrupt, it needs to be setup.
*/
if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
printk(KERN_ERR PREFIX "Can't find FADT\n");
#ifdef CONFIG_SMP
if (available_cpus == 0) {
printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
smp_boot_data.cpu_phys_id[available_cpus] =
hard_smp_processor_id();
available_cpus = 1; /* We've got at least one of these, no? */
}
smp_boot_data.cpu_count = available_cpus;
smp_build_cpu_map();
# ifdef CONFIG_ACPI_NUMA
if (srat_num_cpus == 0) {
int cpu, i = 1;
for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
if (smp_boot_data.cpu_phys_id[cpu] !=
hard_smp_processor_id())
node_cpuid[i++].phys_id =
smp_boot_data.cpu_phys_id[cpu];
}
# endif
#endif
#ifdef CONFIG_ACPI_NUMA
build_cpu_to_node_map();
#endif
/* Make boot-up look pretty */
printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
total_cpus);
return 0;
}
void __init
setup_arch (char **cmdline_p)
{
extern unsigned long ia64_iobase;
unsigned long phys_iobase;
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, sizeof(saved_command_line));
efi_init();
#ifdef CONFIG_ACPI_BOOT
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
#ifdef CONFIG_IA64_GENERIC
machvec_init(acpi_get_sysname());
#endif
/*
* Set `iobase' to the appropriate address in region 6 (uncached access range).
*
* The EFI memory map is the "preferred" location to get the I/O port space base,
* rather the relying on AR.KR0. This should become more clear in future SAL
* specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
* found in the memory map.
*/
phys_iobase = efi_get_iobase();
if (phys_iobase)
/* set AR.KR0 since this is all we use it for anyway */
ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
else {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
"to AR.KR0\n");
printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
io_space[0].sparse = 1;
num_io_spaces = 1;
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
cpu_init(); /* initialize the bootstrap CPU */
#ifdef CONFIG_ACPI_BOOT
acpi_boot_init();
#endif
#ifdef CONFIG_SERIAL_8250_HCDP
if (efi.hcdp) {
void setup_serial_hcdp(void *);
setup_serial_hcdp(efi.hcdp);
}
#endif
#ifdef CONFIG_SERIAL_8250_CONSOLE
/*
* Without HCDP, we won't discover any serial ports until the serial driver looks
* in the ACPI namespace. If ACPI claims there are some legacy devices, register
* the legacy COM ports so serial console works earlier. This is slightly dangerous
* because we don't *really* know whether there's anything there, but we hope that
* all new boxes will implement HCDP.
*/
{
extern unsigned char acpi_legacy_devices;
if (!efi.hcdp && acpi_legacy_devices)
setup_serial_legacy();
}
#endif
#ifdef CONFIG_VT
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
#endif
#ifdef CONFIG_IA64_MCA
/* enable IA-64 Machine Check Abort Handling */
ia64_mca_init();
#endif
platform_setup(cmdline_p);
paging_init();
}