Ejemplo n.º 1
0
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
                                    void *cb_data)
{
    struct sr_datafeed_packet packet;
    struct sr_datafeed_header header;
    struct dev_context *devc;

    devc = sdi->priv;

    sr_dbg("Starting acquisition.");

    devc->cb_data = cb_data;

    /* Send header packet to the session bus. */
    sr_dbg("Sending SR_DF_HEADER.");
    packet.type = SR_DF_HEADER;
    packet.payload = (uint8_t *)&header;
    header.feed_version = 1;
    gettimeofday(&header.starttime, NULL);
    sr_session_send(devc->cb_data, &packet);

    if (!strcmp(di->name, "uni-t-ut61d")) {
        sr_source_add(0, 0, 10 /* poll_timeout */,
                      uni_t_ut61d_receive_data, (void *)sdi);
    } else if (!strcmp(di->name, "voltcraft-vc820")) {
        sr_source_add(0, 0, 10 /* poll_timeout */,
                      voltcraft_vc820_receive_data, (void *)sdi);
    }

    return SR_OK;
}
Ejemplo n.º 2
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	struct dev_context *devc;
	struct sr_serial_dev_inst *serial;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	if (!(devc = sdi->priv)) {
		sr_err("sdi->priv was NULL.");
		return SR_ERR_BUG;
	}

	devc->cb_data = cb_data;

	/*
	 * Reset the number of samples to take. If we've already collected our
	 * quota, but we start a new session, and don't reset this, we'll just
	 * quit without acquiring any new samples.
	 */
	devc->num_samples = 0;
	devc->starttime = g_get_monotonic_time();

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Poll every 50ms, or whenever some data comes in. */
	serial = sdi->conn;
	sr_source_add(serial->fd, G_IO_IN, 50,
		      brymen_dmm_receive_data, (void *)sdi);

	return SR_OK;
}
Ejemplo n.º 3
0
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data, int dmm)
{
	struct dev_context *devc;

	if (!(devc = sdi->priv)) {
		sr_err("sdi->priv was NULL.");
		return SR_ERR_BUG;
	}

	devc->cb_data = cb_data;

	/*
	 * Reset the number of samples to take. If we've already collected our
	 * quota, but we start a new session, and don't reset this, we'll just
	 * quit without acquiring any new samples.
	 */
	devc->num_samples = 0;
	devc->starttime = g_get_monotonic_time();

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);

	/* Poll every 50ms, or whenever some data comes in. */
	sr_source_add(devc->serial->fd, G_IO_IN, 50,
		      dmms[dmm].receive_data, (void *)sdi);

	return SR_OK;
}
Ejemplo n.º 4
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	struct dev_context *devc;
	struct sr_serial_dev_inst *serial;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	if (!(devc = sdi->priv)) {
		sr_err("sdi->priv was NULL.");
		return SR_ERR_BUG;
	}

	devc->cb_data = cb_data;

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Poll every 150ms, or whenever some data comes in. */
	serial = sdi->conn;
	sr_source_add(serial->fd, G_IO_IN, 150, colead_slm_receive_data,
			(void *)sdi);

	return SR_OK;
}
Ejemplo n.º 5
0
SR_PRIV int usb_source_add(struct sr_context *ctx, int timeout,
		sr_receive_data_callback cb, void *cb_data)
{
	if (ctx->usb_source_present) {
		sr_err("A USB event source is already present.");
		return SR_ERR;
	}

#ifdef _WIN32
	ctx->usb_event = CreateEvent(NULL, TRUE, FALSE, NULL);
	g_mutex_init(&ctx->usb_mutex);
	ctx->usb_thread_running = TRUE;
	ctx->usb_thread = g_thread_new("usb", usb_thread, ctx);
	ctx->usb_pollfd.fd = ctx->usb_event;
	ctx->usb_pollfd.events = G_IO_IN;
	ctx->usb_cb = cb;
	ctx->usb_cb_data = cb_data;
	sr_session_source_add_pollfd(&ctx->usb_pollfd, timeout, usb_callback, ctx);
#else
	const struct libusb_pollfd **lupfd;
	unsigned int i;

	lupfd = libusb_get_pollfds(ctx->libusb_ctx);
	for (i = 0; lupfd[i]; i++)
		sr_source_add(lupfd[i]->fd, lupfd[i]->events, timeout, cb, cb_data);
	free(lupfd);
#endif
	ctx->usb_source_present = TRUE;

	return SR_OK;
}
Ejemplo n.º 6
0
static int scpi_vxi_source_add(void *priv, int events, int timeout,
			sr_receive_data_callback cb, void *cb_data)
{
	(void)priv;

	/* Hook up a dummy handler to receive data from the device. */
	return sr_source_add(-1, events, timeout, cb, cb_data);
}
Ejemplo n.º 7
0
SR_PRIV int scpi_usbtmc_source_add(void *priv, int events, int timeout,
			sr_receive_data_callback_t cb, void *cb_data)
{
	struct usbtmc_scpi *uscpi = priv;
	struct sr_usbtmc_dev_inst *usbtmc = uscpi->usbtmc;

	return sr_source_add(usbtmc->fd, events, timeout, cb, cb_data);
}
Ejemplo n.º 8
0
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data)
{
	struct dev_context *devc;

	devc = sdi->priv;

	devc->cb_data = cb_data;

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);

	if (!strcmp(di->name, "uni-t-ut61d")) {
		sr_source_add(0, 0, 10 /* poll_timeout */,
			      uni_t_ut61d_receive_data, (void *)sdi);
	} else if (!strcmp(di->name, "voltcraft-vc820")) {
		sr_source_add(0, 0, 10 /* poll_timeout */,
			      voltcraft_vc820_receive_data, (void *)sdi);
	}

	return SR_OK;
}
Ejemplo n.º 9
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data, int dmm)
{
	struct dev_context *devc;

	devc = sdi->priv;

	devc->cb_data = cb_data;

	devc->starttime = g_get_monotonic_time();

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	sr_source_add(0, 0, 10 /* poll_timeout */,
		      udmms[dmm].receive_data, (void *)sdi);

	return SR_OK;
}
Ejemplo n.º 10
0
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data)
{
	const struct libusb_pollfd **lupfd;
	struct sr_datafeed_packet packet;
	struct sr_datafeed_header header;
	struct dev_context *devc;
	struct drv_context *drvc = di->priv;
	int i;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR;

	devc = sdi->priv;
	devc->cb_data = cb_data;

	if (configure_probes(sdi) != SR_OK) {
		sr_err("Failed to configure probes.");
		return SR_ERR;
	}

	if (dso_init(devc) != SR_OK)
		return SR_ERR;

	if (dso_capture_start(devc) != SR_OK)
		return SR_ERR;

	devc->dev_state = CAPTURE;
	lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
	for (i = 0; lupfd[i]; i++)
		sr_source_add(lupfd[i]->fd, lupfd[i]->events, TICK,
			      handle_event, (void *)sdi);
	free(lupfd);

	/* Send header packet to the session bus. */
	packet.type = SR_DF_HEADER;
	packet.payload = (unsigned char *)&header;
	header.feed_version = 1;
	gettimeofday(&header.starttime, NULL);
	sr_session_send(cb_data, &packet);

	return SR_OK;
}
Ejemplo n.º 11
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data, int idx)
{
	struct dev_context *devc;
	struct sr_serial_dev_inst *serial;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	devc = sdi->priv;
	devc->cb_data = cb_data;
	devc->num_samples = 0;
	devc->starttime = g_get_monotonic_time();

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Poll every 100ms, or whenever some data comes in. */
	serial = sdi->conn;
	sr_source_add(serial->fd, G_IO_IN, 100,
		      mic_devs[idx].receive_data, (void *)sdi);

	return SR_OK;
}
Ejemplo n.º 12
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	struct dev_context *devc;
	int ret = SR_ERR;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	devc = sdi->priv;

	if (mso_configure_probes(sdi) != SR_OK) {
		sr_err("Failed to configure probes.");
		return SR_ERR;
	}

	/* FIXME: No need to do full reconfigure every time */
//      ret = mso_reset_fsm(sdi);
//      if (ret != SR_OK)
//              return ret;

	/* FIXME: ACDC Mode */
	devc->ctlbase1 &= 0x7f;
//      devc->ctlbase1 |= devc->acdcmode;

	ret = mso_configure_rate(sdi, devc->cur_rate);
	if (ret != SR_OK)
		return ret;

	/* set dac offset */
	ret = mso_dac_out(sdi, devc->dac_offset);
	if (ret != SR_OK)
		return ret;

	ret = mso_configure_threshold_level(sdi);
	if (ret != SR_OK)
		return ret;

	ret = mso_configure_trigger(sdi);
	if (ret != SR_OK)
		return ret;

	/* END of config hardware part */
	ret = mso_arm(sdi);
	if (ret != SR_OK)
		return ret;

	/* Start acquisition on the device. */
	mso_check_trigger(devc->serial, &devc->trigger_state);
	ret = mso_check_trigger(devc->serial, NULL);
	if (ret != SR_OK)
		return ret;

	/* Reset trigger state. */
	devc->trigger_state = 0x00;

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Our first probe is analog, the other 8 are of type 'logic'. */
	/* TODO. */

	sr_source_add(devc->serial->fd, G_IO_IN, -1, mso_receive_data, cb_data);

	return SR_OK;
}
Ejemplo n.º 13
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	struct dev_context *devc;
	uint8_t buf[4];
	int bytes_written;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	if (!(devc = sdi->priv)) {
		sr_err("%s: sdi->priv was NULL.", __func__);
		return SR_ERR_BUG;
	}

	if (!devc->ftdic) {
		sr_err("%s: devc->ftdic was NULL.", __func__);
		return SR_ERR_BUG;
	}

	devc->divcount = samplerate_to_divcount(devc->cur_samplerate);
	if (devc->divcount == 0xff) {
		sr_err("%s: Invalid divcount/samplerate.", __func__);
		return SR_ERR;
	}

	if (configure_probes(sdi) != SR_OK) {
		sr_err("Failed to configure probes.");
		return SR_ERR;
	}

	/* Fill acquisition parameters into buf[]. */
	buf[0] = devc->divcount;
	buf[1] = 0xff; /* This byte must always be 0xff. */
	buf[2] = devc->trigger_pattern;
	buf[3] = devc->trigger_mask;

	/* Start acquisition. */
	bytes_written = la8_write(devc, buf, 4);

	if (bytes_written < 0) {
		sr_err("Acquisition failed to start: %d.", bytes_written);
		return SR_ERR;
	} else if (bytes_written != 4) {
		sr_err("Acquisition failed to start: %d.", bytes_written);
		return SR_ERR;
	}

	sr_dbg("Hardware acquisition started successfully.");

	devc->cb_data = cb_data;

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Time when we should be done (for detecting trigger timeouts). */
	devc->done = (devc->divcount + 1) * 0.08388608 + time(NULL)
			+ devc->trigger_timeout;
	devc->block_counter = 0;
	devc->trigger_found = 0;

	/* Hook up a dummy handler to receive data from the LA8. */
	sr_source_add(-1, G_IO_IN, 0, receive_data, (void *)sdi);

	return SR_OK;
}
Ejemplo n.º 14
0
static int hw_start_acquisition(int device_index, gpointer session_data)
{
	struct sr_device_instance *sdi;
	struct sr_datafeed_packet *packet;
	struct sr_datafeed_header *header;
	struct fx2_device *fx2;
	struct libusb_transfer *transfer;
	const struct libusb_pollfd **lupfd;
	int size, i;
	unsigned char *buf;

	if (!(sdi = sr_get_device_instance(device_instances, device_index)))
		return SR_ERR;
	fx2 = sdi->priv;
	fx2->session_data = session_data;

	if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
		sr_err("saleae: %s: packet malloc failed", __func__);
		return SR_ERR_MALLOC;
	}

	if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
		sr_err("saleae: %s: header malloc failed", __func__);
		return SR_ERR_MALLOC;
	}

	/* Start with 2K transfer, subsequently increased to 4K. */
	size = 2048;
	for (i = 0; i < NUM_SIMUL_TRANSFERS; i++) {
		if (!(buf = g_try_malloc(size))) {
			sr_err("saleae: %s: buf malloc failed", __func__);
			return SR_ERR_MALLOC;
		}
		transfer = libusb_alloc_transfer(0);
		libusb_fill_bulk_transfer(transfer, sdi->usb->devhdl,
				2 | LIBUSB_ENDPOINT_IN, buf, size,
				receive_transfer, fx2, 40);
		if (libusb_submit_transfer(transfer) != 0) {
			/* TODO: Free them all. */
			libusb_free_transfer(transfer);
			g_free(buf);
			return SR_ERR;
		}
		size = 4096;
	}

	lupfd = libusb_get_pollfds(usb_context);
	for (i = 0; lupfd[i]; i++)
		sr_source_add(lupfd[i]->fd, lupfd[i]->events, 40, receive_data,
			      NULL);
	free(lupfd);

	packet->type = SR_DF_HEADER;
	packet->payload = header;
	header->feed_version = 1;
	gettimeofday(&header->starttime, NULL);
	header->samplerate = fx2->cur_samplerate;
	header->num_logic_probes = fx2->profile->num_probes;
	header->num_analog_probes = 0;
	sr_session_bus(session_data, packet);
	g_free(header);
	g_free(packet);

	return SR_OK;
}
Ejemplo n.º 15
0
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	struct sr_serial_dev_inst *serial;
	struct dev_context *devc;
	struct sr_probe *probe;
	GSList *l;
	char cmd[256];

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	serial = sdi->conn;
	devc = sdi->priv;

	for (l = sdi->probes; l; l = l->next) {
		probe = l->data;
		sr_dbg("handling probe %s", probe->name);
		if (probe->type == SR_PROBE_ANALOG) {
			if (probe->enabled)
				devc->enabled_analog_probes = g_slist_append(
						devc->enabled_analog_probes, probe);
			if (probe->enabled != devc->analog_channels[probe->index]) {
				/* Enabled channel is currently disabled, or vice versa. */
				sprintf(cmd, ":CHAN%d:DISP %s", probe->index + 1,
						probe->enabled ? "ON" : "OFF");
				if (rigol_ds1xx2_send(sdi, cmd) != SR_OK)
					return SR_ERR;
			}
		} else if (probe->type == SR_PROBE_LOGIC) {
			if (probe->enabled)
				devc->enabled_digital_probes = g_slist_append(
						devc->enabled_digital_probes, probe);
			if (probe->enabled != devc->digital_channels[probe->index]) {
				/* Enabled channel is currently disabled, or vice versa. */
				sprintf(cmd, ":DIG%d:TURN %s", probe->index,
						probe->enabled ? "ON" : "OFF");
				if (rigol_ds1xx2_send(sdi, cmd) != SR_OK)
					return SR_ERR;
			}
		}
	}
	if (!devc->enabled_analog_probes && !devc->enabled_digital_probes)
		return SR_ERR;

	sr_source_add(serial->fd, G_IO_IN, 50, rigol_ds1xx2_receive, (void *)sdi);

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	/* Fetch the first frame. */
	if (devc->enabled_analog_probes) {
		devc->channel_frame = devc->enabled_analog_probes->data;
		if (rigol_ds1xx2_send(sdi, ":WAV:DATA? CHAN%d",
				devc->channel_frame->index + 1) != SR_OK)
			return SR_ERR;
	} else {
		devc->channel_frame = devc->enabled_digital_probes->data;
		if (rigol_ds1xx2_send(sdi, ":WAV:DATA? DIG") != SR_OK)
			return SR_ERR;
	}

	devc->num_frame_bytes = 0;

	return SR_OK;
}
Ejemplo n.º 16
0
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
				    void *cb_data)
{
	struct sr_datafeed_packet *packet;
	struct sr_datafeed_header *header;
	struct dev_context *devc;
	int ret = SR_ERR;

	devc = sdi->priv;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR;

	if (mso_configure_probes(sdi) != SR_OK) {
		sr_err("Failed to configure probes.");
		return SR_ERR;
	}

	/* FIXME: No need to do full reconfigure every time */
//      ret = mso_reset_fsm(sdi);
//      if (ret != SR_OK)
//              return ret;

	/* FIXME: ACDC Mode */
	devc->ctlbase1 &= 0x7f;
//      devc->ctlbase1 |= devc->acdcmode;

	ret = mso_configure_rate(sdi, devc->cur_rate);
	if (ret != SR_OK)
		return ret;

	/* set dac offset */
	ret = mso_dac_out(sdi, devc->dac_offset);
	if (ret != SR_OK)
		return ret;

	ret = mso_configure_threshold_level(sdi);
	if (ret != SR_OK)
		return ret;

	ret = mso_configure_trigger(sdi);
	if (ret != SR_OK)
		return ret;

	/* END of config hardware part */
	ret = mso_arm(sdi);
	if (ret != SR_OK)
		return ret;

	/* Start acquisition on the device. */
	mso_check_trigger(devc->serial, &devc->trigger_state);
	ret = mso_check_trigger(devc->serial, NULL);
	if (ret != SR_OK)
		return ret;

	sr_source_add(devc->serial->fd, G_IO_IN, -1, mso_receive_data, cb_data);

	if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
		sr_err("Datafeed packet malloc failed.");
		return SR_ERR_MALLOC;
	}

	if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
		sr_err("Datafeed header malloc failed.");
		g_free(packet);
		return SR_ERR_MALLOC;
	}

	packet->type = SR_DF_HEADER;
	packet->payload = (unsigned char *)header;
	header->feed_version = 1;
	gettimeofday(&header->starttime, NULL);
	sr_session_send(cb_data, packet);

	g_free(header);
	g_free(packet);

	return SR_OK;
}
Ejemplo n.º 17
0
static int hw_start_acquisition(int device_index, gpointer session_data)
{
	struct sr_datafeed_packet *packet;
	struct sr_datafeed_header *header;
	struct databag *mydata;

	/* TODO: 'mydata' is never g_free()'d? */
	if (!(mydata = g_try_malloc(sizeof(struct databag)))) {
		sr_err("demo: %s: mydata malloc failed", __func__);
		return SR_ERR_MALLOC;
	}

	mydata->sample_generator = default_pattern;
	mydata->session_data = session_data;
	mydata->device_index = device_index;
	mydata->samples_counter = 0;

	if (pipe(mydata->pipe_fds)) {
		/* TODO: Better error message. */
		sr_err("demo: %s: pipe() failed", __func__);
		return SR_ERR;
	}

	channels[0] = g_io_channel_unix_new(mydata->pipe_fds[0]);
	channels[1] = g_io_channel_unix_new(mydata->pipe_fds[1]);

	/* Set channel encoding to binary (default is UTF-8). */
	g_io_channel_set_encoding(channels[0], NULL, NULL);
	g_io_channel_set_encoding(channels[1], NULL, NULL);

	/* Make channels to unbuffered. */
	g_io_channel_set_buffered(channels[0], FALSE);
	g_io_channel_set_buffered(channels[1], FALSE);

	sr_source_add(mydata->pipe_fds[0], G_IO_IN | G_IO_ERR, 40,
		      receive_data, session_data);

	/* Run the demo thread. */
	g_thread_init(NULL);
	/* This must to be done between g_thread_init() & g_thread_create(). */
	mydata->timer = g_timer_new();
	thread_running = 1;
	my_thread =
	    g_thread_create((GThreadFunc)thread_func, mydata, TRUE, NULL);
	if (!my_thread) {
		sr_err("demo: %s: g_thread_create failed", __func__);
		return SR_ERR; /* TODO */
	}

	if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
		sr_err("demo: %s: packet malloc failed", __func__);
		return SR_ERR_MALLOC;
	}

	if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
		sr_err("demo: %s: header malloc failed", __func__);
		return SR_ERR_MALLOC;
	}

	packet->type = SR_DF_HEADER;
	packet->payload = header;
	packet->timeoffset = 0;
	packet->duration = 0;
	header->feed_version = 1;
	gettimeofday(&header->starttime, NULL);
	header->samplerate = cur_samplerate;
	header->num_logic_probes = NUM_PROBES;
	header->num_analog_probes = 0;
	sr_session_bus(session_data, packet);
	g_free(header);
	g_free(packet);

	return SR_OK;
}