static int tmp102_temp_sensor_resume(struct i2c_client *client)
{
	int conf = tmp102_read_reg(client, TMP102_CONF_REG);

	if (conf < 0)
		return conf;
	conf &= ~TMP102_CONF_SD;

	return tmp102_write_reg(client, TMP102_CONF_REG, conf);
}
static int tmp102_temp_sensor_suspend(struct i2c_client *client,
			pm_message_t mesg)
{
	int conf = tmp102_read_reg(client, TMP102_CONF_REG);

	if (conf < 0)
		return conf;
	conf |= TMP102_CONF_SD;

	return tmp102_write_reg(client, TMP102_CONF_REG, conf);
}
Ejemplo n.º 3
0
static int __devexit tmp102_temp_sensor_remove(struct i2c_client *client)
{
	struct tmp102_temp_sensor *tmp102 = i2c_get_clientdata(client);
	sysfs_remove_group(&client->dev.kobj, &temp102_attr_group);
	/* Reset TMP102 and Stop monitoring*/
	tmp102_write_reg(client, TMP102_CONF_REG,(TMP102_RESET|TMP102_CONF_SD));

	kfree(tmp102->tpcb);
	kfree(tmp102);

	return 0;
}
Ejemplo n.º 4
0
static int tmp102_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	int config;

	config = tmp102_read_reg(client, TMP102_CONF_REG);
	if (config < 0)
		return config;

	config &= ~TMP102_CONF_SD;
	return tmp102_write_reg(client, TMP102_CONF_REG, config);
}
static int __devexit tmp102_temp_sensor_remove(struct i2c_client *client)
{
	struct tmp102_temp_sensor *tmp102 = i2c_get_clientdata(client);

	sysfs_remove_group(&client->dev.kobj, &tmp102_temp_sensor_attr_group);

	/* Stop monitoring if device was stopped originally */
	if (tmp102->config_orig & TMP102_CONF_SD) {
		int config;

		config = tmp102_read_reg(client, TMP102_CONF_REG);
		if (config >= 0)
			tmp102_write_reg(client, TMP102_CONF_REG,
					 config | TMP102_CONF_SD);
	}

	kfree(tmp102);

	return 0;
}
Ejemplo n.º 6
0
static ssize_t tmp102_set_temp(struct device *dev,
			       struct device_attribute *attr,
			       const char *buf, size_t count)
{
	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
	struct i2c_client *client = to_i2c_client(dev);
	struct tmp102 *tmp102 = i2c_get_clientdata(client);
	long val;
	int status;

	if (strict_strtol(buf, 10, &val) < 0)
		return -EINVAL;
	val = SENSORS_LIMIT(val, -256000, 255000);

	mutex_lock(&tmp102->lock);
	tmp102->temp[sda->index] = val;
	status = tmp102_write_reg(client, tmp102_reg[sda->index],
				  tmp102_mC_to_reg(val));
	mutex_unlock(&tmp102->lock);
	return status ? : count;
}
static int __devinit tmp102_temp_sensor_probe(
		struct i2c_client *client, const struct i2c_device_id *id)
{
	struct tmp102_temp_sensor *tmp102;
	int ret = 0;
#ifdef CONFIG_THERMAL_DEBUG
	printk(KERN_DEBUG "%s\n", __func__);
#endif
	if (!i2c_check_functionality(client->adapter,
				     I2C_FUNC_SMBUS_WORD_DATA)) {
		dev_err(&client->dev, "adapter doesn't support SMBus word "
			"transactions\n");

		return -ENODEV;
	}

	tmp102 = kzalloc(sizeof(struct tmp102_temp_sensor), GFP_KERNEL);
	if (!tmp102)
		return -ENOMEM;

	mutex_init(&tmp102->sensor_mutex);

	tmp102->iclient = client;
	tmp102->dev = &client->dev;

	kobject_uevent(&client->dev.kobj, KOBJ_ADD);
	i2c_set_clientdata(client, tmp102);

	ret = tmp102_read_reg(client, TMP102_CONF_REG);
	if (ret < 0) {
		dev_err(&client->dev, "error reading config register\n");
		goto free_err;
	}
	tmp102->config_orig = ret;
	ret = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
	if (ret < 0) {
		dev_err(&client->dev, "error writing config register\n");
		goto restore_config_err;
	}
	ret = tmp102_read_reg(client, TMP102_CONF_REG);
	if (ret < 0) {
		dev_err(&client->dev, "error reading config register\n");
		goto restore_config_err;
	}
	ret &= ~TMP102_CONFIG_RD_ONLY;
	if (ret != TMP102_CONFIG) {
		dev_err(&client->dev, "config settings did not stick\n");
		ret = -ENODEV;
		goto restore_config_err;
	}
	tmp102->last_update = jiffies - HZ;
	mutex_init(&tmp102->sensor_mutex);

	ret = sysfs_create_group(&client->dev.kobj,
		&tmp102_temp_sensor_attr_group);
	if (ret)
		goto sysfs_create_err;

	tmp102->therm_fw = kzalloc(sizeof(struct thermal_dev), GFP_KERNEL);
	if (tmp102->therm_fw) {
		tmp102->therm_fw->name = TMP102_SENSOR_NAME;
		tmp102->therm_fw->domain_name = "pcb";
		tmp102->therm_fw->dev = tmp102->dev;
		tmp102->therm_fw->dev_ops = &tmp102_temp_sensor_ops;
		thermal_sensor_dev_register(tmp102->therm_fw);
	} else {
		ret = -ENOMEM;
		goto therm_fw_alloc_err;
	}

	dev_info(&client->dev, "initialized\n");

	return 0;

sysfs_create_err:
	thermal_sensor_dev_unregister(tmp102->therm_fw);
	kfree(tmp102->therm_fw);
restore_config_err:
	tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
therm_fw_alloc_err:
free_err:
	mutex_destroy(&tmp102->sensor_mutex);
	kfree(tmp102);

	return ret;
}
Ejemplo n.º 8
0
static int __devinit tmp102_temp_sensor_probe(
		struct i2c_client *client, const struct i2c_device_id *id)
{
	int ret = 0;
	struct tmp102_temp_sensor *tmp102;
#ifdef CONFIG_THERMAL_DEBUG
	printk(KERN_DEBUG "%s\n", __func__);
#endif
	if (!i2c_check_functionality(client->adapter,
				     I2C_FUNC_SMBUS_WORD_DATA)) {
		dev_err(&client->dev, "adapter doesn't support SMBus word "
			"transactions\n");

		return -ENODEV;
	}

	tmp102 = kzalloc(sizeof(struct tmp102_temp_sensor), GFP_KERNEL);
	if (!tmp102)
		return -ENOMEM;

	tmp102_data=tmp102;
	mutex_init(&tmp102->sensor_mutex);
	tmp102->iclient = client;

	i2c_set_clientdata(client, tmp102);
	/*Reset TMP102*/
	tmp102_write_reg(client, TMP102_CONF_REG,TMP102_RESET);
	if (ret < 0) {
		dev_err(&client->dev, "error writing config register\n");
		goto free_err;;
	}
	/*Config TMP102*/
	ret = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
	if (ret < 0) {
		dev_err(&client->dev, "error writing config register\n");
		goto restore_config_err;
	}
	/*Verify config*/
	ret = tmp102_read_reg(client, TMP102_CONF_REG);
	if (ret < 0) {
		dev_err(&client->dev, "error reading config register\n");
		goto restore_config_err;
	}
#ifdef CONFIG_THERMAL_DEBUG
	printk(KERN_DEBUG "config=0x%X\n", ret);
#endif
	ret &= ~TMP102_CONFIG_RD_ONLY;
	if (ret != TMP102_CONFIG) {
		dev_err(&client->dev, "config settings did not stick\n");
		ret = -ENODEV;
		goto restore_config_err;
	}

	tmp102->last_update = jiffies - HZ;
	tmp102->temp=DEFAULT_TEMPERATURE;
	tmp102->state=LOW_TEMP_STATE;

	ret = sysfs_create_group(&client->dev.kobj, &temp102_attr_group);
	if (ret){
		dev_err(&client->dev, "unable to create attribute\n");
		goto sysfs_create_err;
	}

	tmp102->tpcb=kzalloc(sizeof(struct pcb_sens), GFP_KERNEL);
	if(tmp102->tpcb){
		tmp102->tpcb->update_temp=tmp102_read_current_temp;
		omap4_duty_pcb_register(tmp102->tpcb);
	}else {
		ret = -ENOMEM;
		goto tpcb_alloc_err;
	}

	dev_info(&client->dev, "initialized\n");

	return 0;

tpcb_alloc_err:
	sysfs_remove_group(&client->dev.kobj, &temp102_attr_group);
sysfs_create_err:
restore_config_err:
	tmp102_write_reg(client, TMP102_CONF_REG,(TMP102_RESET|TMP102_CONF_SD));
free_err:
	mutex_destroy(&tmp102->sensor_mutex);
	kfree(tmp102);

	return ret;
}
Ejemplo n.º 9
0
static int __devinit tmp102_probe(struct i2c_client *client,
				  const struct i2c_device_id *id)
{
	struct tmp102 *tmp102;
	int status;

	if (!i2c_check_functionality(client->adapter,
				     I2C_FUNC_SMBUS_WORD_DATA)) {
		dev_err(&client->dev, "adapter doesn't support SMBus word "
			"transactions\n");
		return -ENODEV;
	}

	tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL);
	if (!tmp102) {
		dev_dbg(&client->dev, "kzalloc failed\n");
		return -ENOMEM;
	}
	i2c_set_clientdata(client, tmp102);

	status = tmp102_read_reg(client, TMP102_CONF_REG);
	if (status < 0) {
		dev_err(&client->dev, "error reading config register\n");
		goto fail_free;
	}
	tmp102->config_orig = status;
	status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
	if (status < 0) {
		dev_err(&client->dev, "error writing config register\n");
		goto fail_restore_config;
	}
	status = tmp102_read_reg(client, TMP102_CONF_REG);
	if (status < 0) {
		dev_err(&client->dev, "error reading config register\n");
		goto fail_restore_config;
	}
	status &= ~TMP102_CONFIG_RD_ONLY;
	if (status != TMP102_CONFIG) {
		dev_err(&client->dev, "config settings did not stick\n");
		status = -ENODEV;
		goto fail_restore_config;
	}
	tmp102->last_update = jiffies - HZ;
	mutex_init(&tmp102->lock);

	status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
	if (status) {
		dev_dbg(&client->dev, "could not create sysfs files\n");
		goto fail_restore_config;
	}
	tmp102->hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(tmp102->hwmon_dev)) {
		dev_dbg(&client->dev, "unable to register hwmon device\n");
		status = PTR_ERR(tmp102->hwmon_dev);
		goto fail_remove_sysfs;
	}

	dev_info(&client->dev, "initialized\n");

	return 0;

fail_remove_sysfs:
	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
fail_restore_config:
	tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
fail_free:
	kfree(tmp102);

	return status;
}