Ejemplo n.º 1
0
bool intersects(SkRect tRect, float tRot, TextDrawInfo* s)
{
	float sRot = s->pathRotate;
	if (abs(tRot) < M_PI / 15 && abs(sRot) < M_PI / 15) {
		return SkRect::Intersects(tRect, s->bounds);
	}
	float dist = sqrt(sqr(tRect.centerX() - s->bounds.centerX()) + sqr(tRect.centerY() - s->bounds.centerY()));
	if(dist < 3) {
		return true;
	}
	SkRect sRect = s->bounds;

	// difference close to 90/270 degrees
	if(abs(cos(tRot-sRot)) < 0.3 ){
		// rotate one rectangle to 90 degrees
		tRot += M_PI_2;
		tRect = SkRect::MakeXYWH(tRect.centerX() -  tRect.height() / 2, tRect.centerY() -  tRect.width() / 2,
				tRect.height(), tRect.width());
	}

	// determine difference close to 180/0 degrees
	if(abs(sin(tRot-sRot)) < 0.3){
		// rotate t box
		// (calculate offset for t center suppose we rotate around s center)
		float diff = atan2(tRect.centerY() - sRect.centerY(), tRect.centerX() - sRect.centerX());
		diff -= sRot;
		float left = sRect.centerX() + dist* cos(diff) - tRect.width()/2;
		float top = sRect.centerY() - dist* sin(diff) - tRect.height()/2;
		SkRect nRect = SkRect::MakeXYWH(left, top, tRect.width(), tRect.height());
		return SkRect::Intersects(nRect, sRect);
	}

	// TODO other cases not covered
	return SkRect::Intersects(tRect, sRect);
}
Ejemplo n.º 2
0
GrTexture* GaussianBlur(GrContext* context,
                        GrTexture* srcTexture,
                        bool canClobberSrc,
                        const SkRect& rect,
                        bool cropToRect,
                        float sigmaX,
                        float sigmaY) {
    SkASSERT(context);

    SkIRect clearRect;
    int scaleFactorX, radiusX;
    int scaleFactorY, radiusY;
    int maxTextureSize = context->getMaxTextureSize();
    sigmaX = adjust_sigma(sigmaX, maxTextureSize, &scaleFactorX, &radiusX);
    sigmaY = adjust_sigma(sigmaY, maxTextureSize, &scaleFactorY, &radiusY);

    SkRect srcRect(rect);
    scale_rect(&srcRect, 1.0f / scaleFactorX, 1.0f / scaleFactorY);
    srcRect.roundOut(&srcRect);
    scale_rect(&srcRect, static_cast<float>(scaleFactorX),
                         static_cast<float>(scaleFactorY));

    // setup new clip
    GrClip clip(SkRect::MakeWH(srcRect.width(), srcRect.height()));

    SkASSERT(kBGRA_8888_GrPixelConfig == srcTexture->config() ||
             kRGBA_8888_GrPixelConfig == srcTexture->config() ||
             kAlpha_8_GrPixelConfig == srcTexture->config());

    GrSurfaceDesc desc;
    desc.fFlags = kRenderTarget_GrSurfaceFlag;
    desc.fWidth = SkScalarFloorToInt(srcRect.width());
    desc.fHeight = SkScalarFloorToInt(srcRect.height());
    desc.fConfig = srcTexture->config();

    GrTexture* dstTexture;
    GrTexture* tempTexture;
    SkAutoTUnref<GrTexture> temp1, temp2;

    temp1.reset(context->textureProvider()->refScratchTexture(
        desc, GrTextureProvider::kApprox_ScratchTexMatch));
    dstTexture = temp1.get();
    if (canClobberSrc) {
        tempTexture = srcTexture;
    } else {
        temp2.reset(context->textureProvider()->refScratchTexture(
            desc, GrTextureProvider::kApprox_ScratchTexMatch));
        tempTexture = temp2.get();
    }

    if (NULL == dstTexture || NULL == tempTexture) {
        return NULL;
    }

    GrDrawContext* drawContext = context->drawContext();
    if (!drawContext) {
        return NULL;
    }

    for (int i = 1; i < scaleFactorX || i < scaleFactorY; i *= 2) {
        GrPaint paint;
        SkMatrix matrix;
        matrix.setIDiv(srcTexture->width(), srcTexture->height());
        SkRect dstRect(srcRect);
        if (cropToRect && i == 1) {
            dstRect.offset(-dstRect.fLeft, -dstRect.fTop);
            SkRect domain;
            matrix.mapRect(&domain, rect);
            domain.inset(i < scaleFactorX ? SK_ScalarHalf / srcTexture->width() : 0.0f,
                         i < scaleFactorY ? SK_ScalarHalf / srcTexture->height() : 0.0f);
            SkAutoTUnref<GrFragmentProcessor> fp(   GrTextureDomainEffect::Create(
                srcTexture,
                matrix,
                domain,
                GrTextureDomain::kDecal_Mode,
                GrTextureParams::kBilerp_FilterMode));
            paint.addColorProcessor(fp);
        } else {
            GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
            paint.addColorTextureProcessor(srcTexture, matrix, params);
        }
        scale_rect(&dstRect, i < scaleFactorX ? 0.5f : 1.0f,
                             i < scaleFactorY ? 0.5f : 1.0f);
        drawContext->drawNonAARectToRect(dstTexture->asRenderTarget(), clip, paint, SkMatrix::I(),
                                         dstRect, srcRect);
        srcRect = dstRect;
        srcTexture = dstTexture;
        SkTSwap(dstTexture, tempTexture);
    }

    const SkIRect srcIRect = srcRect.roundOut();

    // For really small blurs(Certainly no wider than 5x5 on desktop gpus) it is faster to just
    // launch a single non separable kernel vs two launches
    if (sigmaX > 0.0f && sigmaY > 0 &&
            (2 * radiusX + 1) * (2 * radiusY + 1) <= MAX_KERNEL_SIZE) {
        // We shouldn't be scaling because this is a small size blur
        SkASSERT((scaleFactorX == scaleFactorY) == 1);
        SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
        convolve_gaussian_2d(drawContext, dstTexture->asRenderTarget(), clip, srcRect, dstRect,
                             srcTexture, radiusX, radiusY, sigmaX, sigmaY, cropToRect, srcIRect);
        srcTexture = dstTexture;
        srcRect = dstRect;
        SkTSwap(dstTexture, tempTexture);

    } else {
        if (sigmaX > 0.0f) {
            if (scaleFactorX > 1) {
                // Clear out a radius to the right of the srcRect to prevent the
                // X convolution from reading garbage.
                clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
                                              radiusX, srcIRect.height());
                drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
            }
            SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
            convolve_gaussian(drawContext, dstTexture->asRenderTarget(), clip, srcRect, dstRect,
                              srcTexture, Gr1DKernelEffect::kX_Direction, radiusX, sigmaX,
                              cropToRect);
            srcTexture = dstTexture;
            srcRect = dstRect;
            SkTSwap(dstTexture, tempTexture);
        }

        if (sigmaY > 0.0f) {
            if (scaleFactorY > 1 || sigmaX > 0.0f) {
                // Clear out a radius below the srcRect to prevent the Y
                // convolution from reading garbage.
                clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
                                              srcIRect.width(), radiusY);
                drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
            }

            SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
            convolve_gaussian(drawContext, dstTexture->asRenderTarget(), clip, srcRect,
                              dstRect, srcTexture, Gr1DKernelEffect::kY_Direction, radiusY, sigmaY,
                              cropToRect);
            srcTexture = dstTexture;
            srcRect = dstRect;
            SkTSwap(dstTexture, tempTexture);
        }
    }

    if (scaleFactorX > 1 || scaleFactorY > 1) {
        // Clear one pixel to the right and below, to accommodate bilinear
        // upsampling.
        clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
                                      srcIRect.width() + 1, 1);
        drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
        clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
                                      1, srcIRect.height());
        drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
        SkMatrix matrix;
        matrix.setIDiv(srcTexture->width(), srcTexture->height());

        GrPaint paint;
        // FIXME:  this should be mitchell, not bilinear.
        GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
        paint.addColorTextureProcessor(srcTexture, matrix, params);

        SkRect dstRect(srcRect);
        scale_rect(&dstRect, (float) scaleFactorX, (float) scaleFactorY);
        drawContext->drawNonAARectToRect(dstTexture->asRenderTarget(), clip, paint,
                                         SkMatrix::I(), dstRect, srcRect);
        srcRect = dstRect;
        srcTexture = dstTexture;
        SkTSwap(dstTexture, tempTexture);
    }
    return SkRef(srcTexture);
}
Ejemplo n.º 3
0
    void onOnceBeforeDraw() override {
        fPaint.setAntiAlias(true);
        fPaint.setLCDRenderText(fLCD);

        SkISize size = this->getISize();
        SkScalar w = SkIntToScalar(size.fWidth);
        SkScalar h = SkIntToScalar(size.fHeight);

        SK_COMPILE_ASSERT(4 == SK_ARRAY_COUNT(fTypefacesToUnref), typeface_cnt);
        fTypefacesToUnref[0] = sk_tool_utils::create_portable_typeface("sans-serif", SkTypeface::kNormal);
        fTypefacesToUnref[1] = sk_tool_utils::create_portable_typeface("sans-serif", SkTypeface::kBold);
        fTypefacesToUnref[2] = sk_tool_utils::create_portable_typeface("serif", SkTypeface::kNormal);
        fTypefacesToUnref[3] = sk_tool_utils::create_portable_typeface("serif", SkTypeface::kBold);

        SkRandom random;
        for (int i = 0; i < kCnt; ++i) {
            int length = random.nextRangeU(kMinLength, kMaxLength);
            char text[kMaxLength];
            for (int j = 0; j < length; ++j) {
                text[j] = (char)random.nextRangeU('!', 'z');
            }
            fStrings[i].set(text, length);

            fColors[i] = random.nextU();
            fColors[i] |= 0xFF000000;
            fColors[i] = sk_tool_utils::color_to_565(fColors[i]);

            static const SkScalar kMinPtSize = 8.f;
            static const SkScalar kMaxPtSize = 32.f;

            fPtSizes[i] = random.nextRangeScalar(kMinPtSize, kMaxPtSize);

            fTypefaces[i] = fTypefacesToUnref[
                random.nextULessThan(SK_ARRAY_COUNT(fTypefacesToUnref))];

            SkRect r;
            fPaint.setColor(fColors[i]);
            fPaint.setTypeface(fTypefaces[i]);
            fPaint.setTextSize(fPtSizes[i]);

            fPaint.measureText(fStrings[i].c_str(), fStrings[i].size(), &r);
            // safeRect is set of x,y positions where we can draw the string without hitting
            // the GM's border.
            SkRect safeRect = SkRect::MakeLTRB(-r.fLeft, -r.fTop, w - r.fRight, h - r.fBottom);
            if (safeRect.isEmpty()) {
                // If we don't fit then just don't worry about how we get cliped to the device
                // border.
                safeRect = SkRect::MakeWH(w, h);
            }
            fPositions[i].fX = random.nextRangeScalar(safeRect.fLeft, safeRect.fRight);
            fPositions[i].fY = random.nextRangeScalar(safeRect.fTop, safeRect.fBottom);

            fClipRects[i] = r;
            fClipRects[i].offset(fPositions[i].fX, fPositions[i].fY);
            fClipRects[i].outset(2.f, 2.f);

            if (fEffectiveClip) {
                fClipRects[i].fRight -= 0.25f * fClipRects[i].width();
            }
        }
    }
Ejemplo n.º 4
0
    virtual void onDraw(SkCanvas* canvas) {
        struct FillAndName {
            SkPath::FillType fFill;
            const char*      fName;
        };
        static const FillAndName gFills[] = {
            {SkPath::kWinding_FillType, "Winding"},
            {SkPath::kEvenOdd_FillType, "Even / Odd"},
            {SkPath::kInverseWinding_FillType, "Inverse Winding"},
            {SkPath::kInverseEvenOdd_FillType, "Inverse Even / Odd"},
        };
        struct StyleAndName {
            SkPaint::Style fStyle;
            const char*    fName;
        };
        static const StyleAndName gStyles[] = {
            {SkPaint::kFill_Style, "Fill"},
            {SkPaint::kStroke_Style, "Stroke"},
            {SkPaint::kStrokeAndFill_Style, "Stroke And Fill"},
        };
        struct CapAndName {
            SkPaint::Cap  fCap;
            SkPaint::Join fJoin;
            const char*   fName;
        };
        static const CapAndName gCaps[] = {
            {SkPaint::kButt_Cap, SkPaint::kBevel_Join, "Butt"},
            {SkPaint::kRound_Cap, SkPaint::kRound_Join, "Round"},
            {SkPaint::kSquare_Cap, SkPaint::kBevel_Join, "Square"}
        };
        struct PathAndName {
            SkPath      fPath;
            const char* fName;
        };
        PathAndName path;
        path.fPath.moveTo(25*SK_Scalar1, 15*SK_Scalar1);
        path.fPath.lineTo(75*SK_Scalar1, 15*SK_Scalar1);
        path.fName = "moveTo-line";

        SkPaint titlePaint;
        titlePaint.setColor(SK_ColorBLACK);
        titlePaint.setAntiAlias(true);
        titlePaint.setLCDRenderText(true);
        titlePaint.setTextSize(15 * SK_Scalar1);
        const char title[] = "Line Drawn Into Rectangle Clips With "
                             "Indicated Style, Fill and Linecaps, with stroke width 10";
        canvas->drawText(title, strlen(title),
                         20 * SK_Scalar1,
                         20 * SK_Scalar1,
                         titlePaint);

        SkLCGRandom rand;
        SkRect rect = SkRect::MakeWH(100*SK_Scalar1, 30*SK_Scalar1);
        canvas->save();
        canvas->translate(10 * SK_Scalar1, 30 * SK_Scalar1);
        canvas->save();
        for (size_t cap = 0; cap < SK_ARRAY_COUNT(gCaps); ++cap) {
            if (0 < cap) {
                canvas->translate((rect.width() + 40 * SK_Scalar1) * SK_ARRAY_COUNT(gStyles), 0);
            }
            canvas->save();
            for (size_t fill = 0; fill < SK_ARRAY_COUNT(gFills); ++fill) {
                if (0 < fill) {
                    canvas->translate(0, rect.height() + 40 * SK_Scalar1);
                }
                canvas->save();
                for (size_t style = 0; style < SK_ARRAY_COUNT(gStyles); ++style) {
                    if (0 < style) {
                        canvas->translate(rect.width() + 40 * SK_Scalar1, 0);
                    }

                    SkColor color = 0xff007000;
                    this->drawPath(path.fPath, canvas, color, rect,
                                   gCaps[cap].fCap, gCaps[cap].fJoin, gStyles[style].fStyle,
                                   gFills[fill].fFill, SK_Scalar1*10);

                    SkPaint rectPaint;
                    rectPaint.setColor(SK_ColorBLACK);
                    rectPaint.setStyle(SkPaint::kStroke_Style);
                    rectPaint.setStrokeWidth(-1);
                    rectPaint.setAntiAlias(true);
                    canvas->drawRect(rect, rectPaint);

                    SkPaint labelPaint;
                    labelPaint.setColor(color);
                    labelPaint.setAntiAlias(true);
                    labelPaint.setLCDRenderText(true);
                    labelPaint.setTextSize(10 * SK_Scalar1);
                    canvas->drawText(gStyles[style].fName,
                                     strlen(gStyles[style].fName),
                                     0, rect.height() + 12 * SK_Scalar1,
                                     labelPaint);
                    canvas->drawText(gFills[fill].fName,
                                     strlen(gFills[fill].fName),
                                     0, rect.height() + 24 * SK_Scalar1,
                                     labelPaint);
                    canvas->drawText(gCaps[cap].fName,
                                     strlen(gCaps[cap].fName),
                                     0, rect.height() + 36 * SK_Scalar1,
                                     labelPaint);
                }
                canvas->restore();
            }
            canvas->restore();
        }
        canvas->restore();
        canvas->restore();
    }
Ejemplo n.º 5
0
void GLCircularRRectEffect::onSetData(const GrGLProgramDataManager& pdman,
                                    const GrProcessor& processor) {
    const CircularRRectEffect& crre = processor.cast<CircularRRectEffect>();
    const SkRRect& rrect = crre.getRRect();
    if (rrect != fPrevRRect) {
        SkRect rect = rrect.getBounds();
        SkScalar radius = 0;
        switch (crre.getCircularCornerFlags()) {
            case CircularRRectEffect::kAll_CornerFlags:
                SkASSERT(rrect.isSimpleCircular());
                radius = rrect.getSimpleRadii().fX;
                SkASSERT(radius >= kRadiusMin);
                rect.inset(radius, radius);
                break;
            case CircularRRectEffect::kTopLeft_CornerFlag:
                radius = rrect.radii(SkRRect::kUpperLeft_Corner).fX;
                rect.fLeft += radius;
                rect.fTop += radius;
                rect.fRight += 0.5f;
                rect.fBottom += 0.5f;
                break;
            case CircularRRectEffect::kTopRight_CornerFlag:
                radius = rrect.radii(SkRRect::kUpperRight_Corner).fX;
                rect.fLeft -= 0.5f;
                rect.fTop += radius;
                rect.fRight -= radius;
                rect.fBottom += 0.5f;
                break;
            case CircularRRectEffect::kBottomRight_CornerFlag:
                radius = rrect.radii(SkRRect::kLowerRight_Corner).fX;
                rect.fLeft -= 0.5f;
                rect.fTop -= 0.5f;
                rect.fRight -= radius;
                rect.fBottom -= radius;
                break;
            case CircularRRectEffect::kBottomLeft_CornerFlag:
                radius = rrect.radii(SkRRect::kLowerLeft_Corner).fX;
                rect.fLeft += radius;
                rect.fTop -= 0.5f;
                rect.fRight += 0.5f;
                rect.fBottom -= radius;
                break;
            case CircularRRectEffect::kLeft_CornerFlags:
                radius = rrect.radii(SkRRect::kUpperLeft_Corner).fX;
                rect.fLeft += radius;
                rect.fTop += radius;
                rect.fRight += 0.5f;
                rect.fBottom -= radius;
                break;
            case CircularRRectEffect::kTop_CornerFlags:
                radius = rrect.radii(SkRRect::kUpperLeft_Corner).fX;
                rect.fLeft += radius;
                rect.fTop += radius;
                rect.fRight -= radius;
                rect.fBottom += 0.5f;
                break;
            case CircularRRectEffect::kRight_CornerFlags:
                radius = rrect.radii(SkRRect::kUpperRight_Corner).fX;
                rect.fLeft -= 0.5f;
                rect.fTop += radius;
                rect.fRight -= radius;
                rect.fBottom -= radius;
                break;
            case CircularRRectEffect::kBottom_CornerFlags:
                radius = rrect.radii(SkRRect::kLowerLeft_Corner).fX;
                rect.fLeft += radius;
                rect.fTop -= 0.5f;
                rect.fRight -= radius;
                rect.fBottom -= radius;
                break;
            default:
                SkFAIL("Should have been one of the above cases.");
        }
        pdman.set4f(fInnerRectUniform, rect.fLeft, rect.fTop, rect.fRight, rect.fBottom);
        pdman.set1f(fRadiusPlusHalfUniform, radius + 0.5f);
        fPrevRRect = rrect;
    }
}
    virtual void onDrawContent(SkCanvas* canvas) {
        struct FillAndName {
            SkPath::FillType fFill;
            const char*      fName;
        };
        static const FillAndName gFills[] = {
            {SkPath::kWinding_FillType, "Winding"},
            {SkPath::kEvenOdd_FillType, "Even / Odd"},
            {SkPath::kInverseWinding_FillType, "Inverse Winding"},
            {SkPath::kInverseEvenOdd_FillType, "Inverse Even / Odd"},
        };
        struct StyleAndName {
            SkPaint::Style fStyle;
            const char*    fName;
        };
        static const StyleAndName gStyles[] = {
            {SkPaint::kFill_Style, "Fill"},
            {SkPaint::kStroke_Style, "Stroke"},
            {SkPaint::kStrokeAndFill_Style, "Stroke And Fill"},
        };

        SkPaint titlePaint;
        titlePaint.setColor(SK_ColorBLACK);
        titlePaint.setAntiAlias(true);
        titlePaint.setLCDRenderText(true);
        titlePaint.setTextSize(24 * SK_Scalar1);
        const char title[] = "Empty Paths Drawn Into Rectangle Clips With Indicated Style and Fill";
        canvas->drawText(title, strlen(title),
                         40 * SK_Scalar1,
                         100*SK_Scalar1,
                         titlePaint);

        SkRandom rand;
        SkRect rect = SkRect::MakeWH(125*SK_Scalar1, 100*SK_Scalar1);
        int i = 0;
        canvas->save();
        canvas->translate(80 * SK_Scalar1, 0);
        canvas->save();
        for (size_t style = 0; style < SK_ARRAY_COUNT(gStyles); ++style) {
            for (size_t fill = 0; fill < SK_ARRAY_COUNT(gFills); ++fill) {
                if (0 == i % 4) {
                    canvas->restore();
                    canvas->translate(0, rect.height() + 50 * SK_Scalar1);
                    canvas->save();
                } else {
                    canvas->translate(rect.width() + 100 * SK_Scalar1, 0);
                }
                ++i;


                SkColor color = rand.nextU();
                color = 0xff000000| color; // force solid
                this->drawEmpty(canvas, color, rect,
                                gStyles[style].fStyle, gFills[fill].fFill);

                SkPaint rectPaint;
                rectPaint.setColor(SK_ColorBLACK);
                rectPaint.setStyle(SkPaint::kStroke_Style);
                rectPaint.setStrokeWidth(-1);
                rectPaint.setAntiAlias(true);
                canvas->drawRect(rect, rectPaint);

                char label[1024];
                sprintf(label, "%s, %s", gStyles[style].fName,
                                         gFills[fill].fName);
                SkPaint labelPaint;
                labelPaint.setColor(color);
                labelPaint.setAntiAlias(true);
                labelPaint.setLCDRenderText(true);
                canvas->drawText(label, strlen(label), 
                                 0, rect.height() + 15 * SK_Scalar1,
                                 labelPaint);
            }
        }
        canvas->restore();
        canvas->restore();
    }
Ejemplo n.º 7
0
bool GrStencilAndCoverPathRenderer::onDrawPath(const DrawPathArgs& args) {
    SkASSERT(!args.fStroke->isHairlineStyle());
    const SkPath& path = *args.fPath;
    GrPipelineBuilder* pipelineBuilder = args.fPipelineBuilder;
    const SkMatrix& viewMatrix = *args.fViewMatrix;

    SkASSERT(pipelineBuilder->getStencil().isDisabled());

    if (args.fAntiAlias) {
        SkASSERT(pipelineBuilder->getRenderTarget()->isStencilBufferMultisampled());
        pipelineBuilder->enableState(GrPipelineBuilder::kHWAntialias_Flag);
    }

    SkAutoTUnref<GrPath> p(get_gr_path(fResourceProvider, path, *args.fStroke));

    if (path.isInverseFillType()) {
        GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
            kKeep_StencilOp,
            kZero_StencilOp,
            // We know our rect will hit pixels outside the clip and the user bits will be 0
            // outside the clip. So we can't just fill where the user bits are 0. We also need to
            // check that the clip bit is set.
            kEqualIfInClip_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        pipelineBuilder->setStencil(kInvertedStencilPass);

        // fake inverse with a stencil and cover
        args.fTarget->stencilPath(*pipelineBuilder, viewMatrix, p, p->getFillType());

        SkMatrix invert = SkMatrix::I();
        SkRect bounds =
            SkRect::MakeLTRB(0, 0, SkIntToScalar(pipelineBuilder->getRenderTarget()->width()),
                             SkIntToScalar(pipelineBuilder->getRenderTarget()->height()));
        SkMatrix vmi;
        // mapRect through persp matrix may not be correct
        if (!viewMatrix.hasPerspective() && viewMatrix.invert(&vmi)) {
            vmi.mapRect(&bounds);
            // theoretically could set bloat = 0, instead leave it because of matrix inversion
            // precision.
            SkScalar bloat = viewMatrix.getMaxScale() * SK_ScalarHalf;
            bounds.outset(bloat, bloat);
        } else {
            if (!viewMatrix.invert(&invert)) {
                return false;
            }
        }
        const SkMatrix& viewM = viewMatrix.hasPerspective() ? SkMatrix::I() : viewMatrix;
        if (pipelineBuilder->getRenderTarget()->hasMixedSamples()) {
            pipelineBuilder->disableState(GrPipelineBuilder::kHWAntialias_Flag);
        }
        args.fTarget->drawNonAARect(*pipelineBuilder, args.fColor, viewM, bounds, invert);
    } else {
        GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
            kZero_StencilOp,
            kKeep_StencilOp,
            kNotEqual_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        pipelineBuilder->setStencil(kStencilPass);
        SkAutoTUnref<GrDrawPathBatchBase> batch(
                GrDrawPathBatch::Create(viewMatrix, args.fColor, p->getFillType(), p));
        args.fTarget->drawPathBatch(*pipelineBuilder, batch);
    }

    pipelineBuilder->stencil()->setDisabled();
    return true;
}
Ejemplo n.º 8
0
void GrAARectRenderer::StrokeAARect(GrDrawTarget* target,
                                    GrPipelineBuilder* pipelineBuilder,
                                    GrColor color,
                                    const SkMatrix& viewMatrix,
                                    const SkRect& rect,
                                    const SkRect& devRect,
                                    const SkStrokeRec& stroke) {
    SkVector devStrokeSize;
    SkScalar width = stroke.getWidth();
    if (width > 0) {
        devStrokeSize.set(width, width);
        viewMatrix.mapVectors(&devStrokeSize, 1);
        devStrokeSize.setAbs(devStrokeSize);
    } else {
        devStrokeSize.set(SK_Scalar1, SK_Scalar1);
    }

    const SkScalar dx = devStrokeSize.fX;
    const SkScalar dy = devStrokeSize.fY;
    const SkScalar rx = SkScalarMul(dx, SK_ScalarHalf);
    const SkScalar ry = SkScalarMul(dy, SK_ScalarHalf);

    SkScalar spare;
    {
        SkScalar w = devRect.width() - dx;
        SkScalar h = devRect.height() - dy;
        spare = SkTMin(w, h);
    }

    SkRect devOutside(devRect);
    devOutside.outset(rx, ry);

    bool miterStroke = true;
    // For hairlines, make bevel and round joins appear the same as mitered ones.
    // small miter limit means right angles show bevel...
    if ((width > 0) && (stroke.getJoin() != SkPaint::kMiter_Join ||
                        stroke.getMiter() < SK_ScalarSqrt2)) {
        miterStroke = false;
    }

    if (spare <= 0 && miterStroke) {
        FillAARect(target, pipelineBuilder, color, viewMatrix, devOutside, devOutside);
        return;
    }

    SkRect devInside(devRect);
    devInside.inset(rx, ry);

    SkRect devOutsideAssist(devRect);

    // For bevel-stroke, use 2 SkRect instances(devOutside and devOutsideAssist)
    // to draw the outer of the rect. Because there are 8 vertices on the outer
    // edge, while vertex number of inner edge is 4, the same as miter-stroke.
    if (!miterStroke) {
        devOutside.inset(0, ry);
        devOutsideAssist.outset(0, ry);
    }

    GeometryStrokeAARect(target, pipelineBuilder, color, viewMatrix, devOutside,
                         devOutsideAssist, devInside, miterStroke);
}
Ejemplo n.º 9
0
void SkBBoxHierarchyRecord::handleBBox(const SkRect& bounds) {
    SkIRect r;
    bounds.roundOut(&r);
    SkPictureStateTree::Draw* draw = fStateTree->appendDraw(this->writeStream().bytesWritten());
    fBoundingHierarchy->insert(draw, r, true);
}
Ejemplo n.º 10
0
void SkBitmapDevice::drawBitmapRect(const SkDraw& draw, const SkBitmap& bitmap,
                                    const SkRect* src, const SkRect& dst,
                                    const SkPaint& paint,
                                    SkCanvas::DrawBitmapRectFlags flags) {
    SkMatrix    matrix;
    SkRect      bitmapBounds, tmpSrc, tmpDst;
    SkBitmap    tmpBitmap;

    bitmapBounds.isetWH(bitmap.width(), bitmap.height());

    // Compute matrix from the two rectangles
    if (src) {
        tmpSrc = *src;
    } else {
        tmpSrc = bitmapBounds;
    }
    matrix.setRectToRect(tmpSrc, dst, SkMatrix::kFill_ScaleToFit);

    const SkRect* dstPtr = &dst;
    const SkBitmap* bitmapPtr = &bitmap;

    // clip the tmpSrc to the bounds of the bitmap, and recompute dstRect if
    // needed (if the src was clipped). No check needed if src==null.
    if (src) {
        if (!bitmapBounds.contains(*src)) {
            if (!tmpSrc.intersect(bitmapBounds)) {
                return; // nothing to draw
            }
            // recompute dst, based on the smaller tmpSrc
            matrix.mapRect(&tmpDst, tmpSrc);
            dstPtr = &tmpDst;
        }

        // since we may need to clamp to the borders of the src rect within
        // the bitmap, we extract a subset.
        SkIRect srcIR;
        tmpSrc.roundOut(&srcIR);
        if(bitmap.pixelRef()->getTexture()) {
            // Accelerated source canvas, don't use extractSubset but readPixels to get the subset.
            // This way, the pixels are copied in CPU memory instead of GPU memory.
            bitmap.pixelRef()->readPixels(&tmpBitmap, &srcIR);
        } else {
            if (!bitmap.extractSubset(&tmpBitmap, srcIR)) {
                return;
            }
        }
        bitmapPtr = &tmpBitmap;

        // Since we did an extract, we need to adjust the matrix accordingly
        SkScalar dx = 0, dy = 0;
        if (srcIR.fLeft > 0) {
            dx = SkIntToScalar(srcIR.fLeft);
        }
        if (srcIR.fTop > 0) {
            dy = SkIntToScalar(srcIR.fTop);
        }
        if (dx || dy) {
            matrix.preTranslate(dx, dy);
        }

        SkRect extractedBitmapBounds;
        extractedBitmapBounds.isetWH(bitmapPtr->width(), bitmapPtr->height());
        if (extractedBitmapBounds == tmpSrc) {
            // no fractional part in src, we can just call drawBitmap
            goto USE_DRAWBITMAP;
        }
    } else {
        USE_DRAWBITMAP:
        // We can go faster by just calling drawBitmap, which will concat the
        // matrix with the CTM, and try to call drawSprite if it can. If not,
        // it will make a shader and call drawRect, as we do below.
        this->drawBitmap(draw, *bitmapPtr, matrix, paint);
        return;
    }

    // construct a shader, so we can call drawRect with the dst
    SkShader* s = SkShader::CreateBitmapShader(*bitmapPtr,
                                               SkShader::kClamp_TileMode,
                                               SkShader::kClamp_TileMode,
                                               &matrix);
    if (NULL == s) {
        return;
    }

    SkPaint paintWithShader(paint);
    paintWithShader.setStyle(SkPaint::kFill_Style);
    paintWithShader.setShader(s)->unref();

    // Call ourself, in case the subclass wanted to share this setup code
    // but handle the drawRect code themselves.
    this->drawRect(draw, *dstPtr, paintWithShader);
}
Ejemplo n.º 11
0
    void generateAAFillRectGeometry(void* vertices,
                                    size_t offset,
                                    size_t vertexStride,
                                    GrColor color,
                                    const SkMatrix& viewMatrix,
                                    const SkRect& rect,
                                    const SkRect& devRect,
                                    bool tweakAlphaForCoverage) const {
        intptr_t verts = reinterpret_cast<intptr_t>(vertices) + offset;

        SkPoint* fan0Pos = reinterpret_cast<SkPoint*>(verts);
        SkPoint* fan1Pos = reinterpret_cast<SkPoint*>(verts + 4 * vertexStride);

        SkScalar inset = SkMinScalar(devRect.width(), SK_Scalar1);
        inset = SK_ScalarHalf * SkMinScalar(inset, devRect.height());

        if (viewMatrix.rectStaysRect()) {
            set_inset_fan(fan0Pos, vertexStride, devRect, -SK_ScalarHalf, -SK_ScalarHalf);
            set_inset_fan(fan1Pos, vertexStride, devRect, inset,  inset);
        } else {
            // compute transformed (1, 0) and (0, 1) vectors
            SkVector vec[2] = {
              { viewMatrix[SkMatrix::kMScaleX], viewMatrix[SkMatrix::kMSkewY] },
              { viewMatrix[SkMatrix::kMSkewX],  viewMatrix[SkMatrix::kMScaleY] }
            };

            vec[0].normalize();
            vec[0].scale(SK_ScalarHalf);
            vec[1].normalize();
            vec[1].scale(SK_ScalarHalf);

            // create the rotated rect
            fan0Pos->setRectFan(rect.fLeft, rect.fTop,
                                rect.fRight, rect.fBottom, vertexStride);
            viewMatrix.mapPointsWithStride(fan0Pos, vertexStride, 4);

            // Now create the inset points and then outset the original
            // rotated points

            // TL
            *((SkPoint*)((intptr_t)fan1Pos + 0 * vertexStride)) =
                *((SkPoint*)((intptr_t)fan0Pos + 0 * vertexStride)) + vec[0] + vec[1];
            *((SkPoint*)((intptr_t)fan0Pos + 0 * vertexStride)) -= vec[0] + vec[1];
            // BL
            *((SkPoint*)((intptr_t)fan1Pos + 1 * vertexStride)) =
                *((SkPoint*)((intptr_t)fan0Pos + 1 * vertexStride)) + vec[0] - vec[1];
            *((SkPoint*)((intptr_t)fan0Pos + 1 * vertexStride)) -= vec[0] - vec[1];
            // BR
            *((SkPoint*)((intptr_t)fan1Pos + 2 * vertexStride)) =
                *((SkPoint*)((intptr_t)fan0Pos + 2 * vertexStride)) - vec[0] - vec[1];
            *((SkPoint*)((intptr_t)fan0Pos + 2 * vertexStride)) += vec[0] + vec[1];
            // TR
            *((SkPoint*)((intptr_t)fan1Pos + 3 * vertexStride)) =
                *((SkPoint*)((intptr_t)fan0Pos + 3 * vertexStride)) - vec[0] + vec[1];
            *((SkPoint*)((intptr_t)fan0Pos + 3 * vertexStride)) += vec[0] - vec[1];
        }

        // Make verts point to vertex color and then set all the color and coverage vertex attrs
        // values.
        verts += sizeof(SkPoint);
        for (int i = 0; i < 4; ++i) {
            if (tweakAlphaForCoverage) {
                *reinterpret_cast<GrColor*>(verts + i * vertexStride) = 0;
            } else {
                *reinterpret_cast<GrColor*>(verts + i * vertexStride) = color;
                *reinterpret_cast<float*>(verts + i * vertexStride + sizeof(GrColor)) = 0;
            }
        }

        int scale;
        if (inset < SK_ScalarHalf) {
            scale = SkScalarFloorToInt(512.0f * inset / (inset + SK_ScalarHalf));
            SkASSERT(scale >= 0 && scale <= 255);
        } else {
            scale = 0xff;
        }

        verts += 4 * vertexStride;

        float innerCoverage = GrNormalizeByteToFloat(scale);
        GrColor scaledColor = (0xff == scale) ? color : SkAlphaMulQ(color, scale);

        for (int i = 0; i < 4; ++i) {
            if (tweakAlphaForCoverage) {
                *reinterpret_cast<GrColor*>(verts + i * vertexStride) = scaledColor;
            } else {
                *reinterpret_cast<GrColor*>(verts + i * vertexStride) = color;
                *reinterpret_cast<float*>(verts + i * vertexStride +
                                          sizeof(GrColor)) = innerCoverage;
            }
        }
    }
Ejemplo n.º 12
0
void SkDeferredCanvas::flush_translate(SkScalar* x, SkScalar* y, const SkPaint& paint) {
    SkRect tmp = SkRect::MakeXYWH(*x, *y, 1, 1);
    this->flush_check(&tmp, &paint, kNoClip_Flag | kNoCull_Flag | kNoScale_Flag);
    *x = tmp.x();
    *y = tmp.y();
}
Ejemplo n.º 13
0
GrTexture* GaussianBlur(GrContext* context,
                        GrTexture* srcTexture,
                        bool canClobberSrc,
                        const SkRect& rect,
                        bool cropToRect,
                        float sigmaX,
                        float sigmaY) {
    SkASSERT(NULL != context);

    GrContext::AutoRenderTarget art(context);

    GrContext::AutoMatrix am;
    am.setIdentity(context);

    SkIRect clearRect;
    int scaleFactorX, radiusX;
    int scaleFactorY, radiusY;
    sigmaX = adjust_sigma(sigmaX, &scaleFactorX, &radiusX);
    sigmaY = adjust_sigma(sigmaY, &scaleFactorY, &radiusY);

    SkRect srcRect(rect);
    scale_rect(&srcRect, 1.0f / scaleFactorX, 1.0f / scaleFactorY);
    srcRect.roundOut();
    scale_rect(&srcRect, static_cast<float>(scaleFactorX),
                         static_cast<float>(scaleFactorY));

    GrContext::AutoClip acs(context, SkRect::MakeWH(srcRect.width(), srcRect.height()));

    SkASSERT(kBGRA_8888_GrPixelConfig == srcTexture->config() ||
             kRGBA_8888_GrPixelConfig == srcTexture->config() ||
             kAlpha_8_GrPixelConfig == srcTexture->config());

    GrTextureDesc desc;
    desc.fFlags = kRenderTarget_GrTextureFlagBit | kNoStencil_GrTextureFlagBit;
    desc.fWidth = SkScalarFloorToInt(srcRect.width());
    desc.fHeight = SkScalarFloorToInt(srcRect.height());
    desc.fConfig = srcTexture->config();

    GrAutoScratchTexture temp1, temp2;
    GrTexture* dstTexture = temp1.set(context, desc);
    GrTexture* tempTexture = canClobberSrc ? srcTexture : temp2.set(context, desc);
    if (NULL == dstTexture || NULL == tempTexture) {
        return NULL;
    }

    for (int i = 1; i < scaleFactorX || i < scaleFactorY; i *= 2) {
        GrPaint paint;
        SkMatrix matrix;
        matrix.setIDiv(srcTexture->width(), srcTexture->height());
        context->setRenderTarget(dstTexture->asRenderTarget());
        SkRect dstRect(srcRect);
        if (cropToRect && i == 1) {
            dstRect.offset(-dstRect.fLeft, -dstRect.fTop);
            SkRect domain;
            matrix.mapRect(&domain, rect);
            domain.inset(i < scaleFactorX ? SK_ScalarHalf / srcTexture->width() : 0.0f,
                         i < scaleFactorY ? SK_ScalarHalf / srcTexture->height() : 0.0f);
            SkAutoTUnref<GrEffectRef> effect(GrTextureDomainEffect::Create(
                srcTexture,
                matrix,
                domain,
                GrTextureDomain::kDecal_Mode,
                GrTextureParams::kBilerp_FilterMode));
            paint.addColorEffect(effect);
        } else {
            GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
            paint.addColorTextureEffect(srcTexture, matrix, params);
        }
        scale_rect(&dstRect, i < scaleFactorX ? 0.5f : 1.0f,
                             i < scaleFactorY ? 0.5f : 1.0f);
        context->drawRectToRect(paint, dstRect, srcRect);
        srcRect = dstRect;
        srcTexture = dstTexture;
        SkTSwap(dstTexture, tempTexture);
    }

    SkIRect srcIRect;
    srcRect.roundOut(&srcIRect);

    if (sigmaX > 0.0f) {
        if (scaleFactorX > 1) {
            // Clear out a radius to the right of the srcRect to prevent the
            // X convolution from reading garbage.
            clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
                                          radiusX, srcIRect.height());
            context->clear(&clearRect, 0x0, false);
        }
        context->setRenderTarget(dstTexture->asRenderTarget());
        SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
        convolve_gaussian(context, srcRect, dstRect, srcTexture,
                          Gr1DKernelEffect::kX_Direction, radiusX, sigmaX, cropToRect);
        srcTexture = dstTexture;
        srcRect = dstRect;
        SkTSwap(dstTexture, tempTexture);
    }

    if (sigmaY > 0.0f) {
        if (scaleFactorY > 1 || sigmaX > 0.0f) {
            // Clear out a radius below the srcRect to prevent the Y
            // convolution from reading garbage.
            clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
                                          srcIRect.width(), radiusY);
            context->clear(&clearRect, 0x0, false);
        }

        context->setRenderTarget(dstTexture->asRenderTarget());
        SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
        convolve_gaussian(context, srcRect, dstRect, srcTexture,
                          Gr1DKernelEffect::kY_Direction, radiusY, sigmaY, cropToRect);
        srcTexture = dstTexture;
        srcRect = dstRect;
        SkTSwap(dstTexture, tempTexture);
    }

    if (scaleFactorX > 1 || scaleFactorY > 1) {
        // Clear one pixel to the right and below, to accommodate bilinear
        // upsampling.
        clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
                                      srcIRect.width() + 1, 1);
        context->clear(&clearRect, 0x0, false);
        clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
                                      1, srcIRect.height());
        context->clear(&clearRect, 0x0, false);
        SkMatrix matrix;
        matrix.setIDiv(srcTexture->width(), srcTexture->height());
        context->setRenderTarget(dstTexture->asRenderTarget());

        GrPaint paint;
        // FIXME:  this should be mitchell, not bilinear.
        GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
        paint.addColorTextureEffect(srcTexture, matrix, params);

        SkRect dstRect(srcRect);
        scale_rect(&dstRect, (float) scaleFactorX, (float) scaleFactorY);
        context->drawRectToRect(paint, dstRect, srcRect);
        srcRect = dstRect;
        srcTexture = dstTexture;
        SkTSwap(dstTexture, tempTexture);
    }
    if (srcTexture == temp1.texture()) {
        return temp1.detach();
    } else if (srcTexture == temp2.texture()) {
        return temp2.detach();
    } else {
        srcTexture->ref();
        return srcTexture;
    }
}
Ejemplo n.º 14
0
void drawTextOverCanvas(RenderingContext* rc, SkCanvas* cv) {
	SkRect r = SkRect::MakeLTRB(0, 0, rc->width, rc->height);
	r.inset(-100, -100);
	quad_tree<TextDrawInfo*> boundsIntersect(r, 4, 0.6);

	SkPaint paintIcon;
	paintIcon.setStyle(SkPaint::kStroke_Style);
	paintIcon.setStrokeWidth(1);
	paintIcon.setColor(0xff000000);
	SkPaint paintText;
	paintText.setStyle(SkPaint::kFill_Style);
	paintText.setStrokeWidth(1);
	paintText.setColor(0xff000000);
	paintText.setTextAlign(SkPaint::kCenter_Align);
	paintText.setTypeface(serif);
	paintText.setAntiAlias(true);
	SkPaint::FontMetrics fm;

	// 1. Sort text using text order
	std::sort(rc->textToDraw.begin(), rc->textToDraw.end(), textOrder);
	uint size = rc->textToDraw.size();
	for (uint i = 0; i < size; i++) {
		TextDrawInfo* text = rc->textToDraw.at(i);
		if (text->text.length() > 0) {
			size_t d = text->text.find(DELIM_CHAR);
			// not used now functionality
			// possibly it will be used specifying english names after that character
			if (d > 0) {
				text->text = text->text.substr(0, d);
			}

			// sest text size before finding intersection (it is used there)
			float textSize = getDensityValue(rc, text->textSize);
			paintText.setTextSize(textSize);
			paintText.setFakeBoldText(text->bold);
			paintText.setColor(text->textColor);
			// align center y
			paintText.getFontMetrics(&fm);
			text->centerY += (-fm.fAscent);

			// calculate if there is intersection
			bool intersects = findTextIntersection(cv, rc, boundsIntersect, text, &paintText, &paintIcon);
			if (!intersects) {
				if(rc->interrupted()){
						return;
				}
				if (text->drawOnPath && text->path != NULL) {
					if (text->textShadow > 0) {
						paintText.setColor(0xFFFFFFFF);
						paintText.setStyle(SkPaint::kStroke_Style);
						paintText.setStrokeWidth(2 + text->textShadow);
						rc->nativeOperations.pause();
						cv->drawTextOnPathHV(text->text.c_str(), text->text.length(), *text->path, text->hOffset,
								text->vOffset, paintText);
						rc->nativeOperations.start();
						// reset
						paintText.setStyle(SkPaint::kFill_Style);
						paintText.setStrokeWidth(2);
						paintText.setColor(text->textColor);
					}
					rc->nativeOperations.pause();
					cv->drawTextOnPathHV(text->text.c_str(), text->text.length(), *text->path, text->hOffset,
							text->vOffset, paintText);
					rc->nativeOperations.start();
				} else {
					if (text->shieldRes.length() > 0) {
						SkBitmap* ico = getCachedBitmap(rc, text->shieldRes);
						if (ico != NULL) {
							rc->nativeOperations.pause();
							cv->drawBitmap(*ico, text->centerX - ico->width() / 2 - 0.5f,
									text->centerY - ico->height() / 2 - getDensityValue(rc, 4.5f), &paintIcon);
							rc->nativeOperations.start();
						}
					}
					drawWrappedText(rc, cv, text, textSize, paintText);
				}
			}
		}
	}
}
Ejemplo n.º 15
0
static SkRect inset(const SkRect& r) {
    SkRect rect = r;
    rect.inset(r.width() / 8, r.height() / 8);
    return rect;
}
Ejemplo n.º 16
0
void NativeImageSkia::drawPattern(
    GraphicsContext* context,
    const FloatRect& floatSrcRect,
    const FloatSize& scale,
    const FloatPoint& phase,
    CompositeOperator compositeOp,
    const FloatRect& destRect,
    WebBlendMode blendMode,
    const IntSize& repeatSpacing) const
{
    FloatRect normSrcRect = floatSrcRect;
    normSrcRect.intersect(FloatRect(0, 0, bitmap().width(), bitmap().height()));
    if (destRect.isEmpty() || normSrcRect.isEmpty())
        return; // nothing to draw

    SkMatrix totalMatrix = context->getTotalMatrix();
    AffineTransform ctm = context->getCTM();
    SkScalar ctmScaleX = ctm.xScale();
    SkScalar ctmScaleY = ctm.yScale();
    totalMatrix.preScale(scale.width(), scale.height());

    // Figure out what size the bitmap will be in the destination. The
    // destination rect is the bounds of the pattern, we need to use the
    // matrix to see how big it will be.
    SkRect destRectTarget;
    totalMatrix.mapRect(&destRectTarget, normSrcRect);

    float destBitmapWidth = SkScalarToFloat(destRectTarget.width());
    float destBitmapHeight = SkScalarToFloat(destRectTarget.height());

    bool isLazyDecoded = DeferredImageDecoder::isLazyDecoded(bitmap());

    // Compute the resampling mode.
    InterpolationQuality resampling;
    if (context->isAccelerated())
        resampling = InterpolationLow;
    else if (isLazyDecoded)
        resampling = InterpolationHigh;
    else
        resampling = computeInterpolationQuality(totalMatrix, normSrcRect.width(), normSrcRect.height(), destBitmapWidth, destBitmapHeight, isDataComplete());
    resampling = limitInterpolationQuality(context, resampling);

    SkMatrix localMatrix;
    // We also need to translate it such that the origin of the pattern is the
    // origin of the destination rect, which is what WebKit expects. Skia uses
    // the coordinate system origin as the base for the pattern. If WebKit wants
    // a shifted image, it will shift it from there using the localMatrix.
    const float adjustedX = phase.x() + normSrcRect.x() * scale.width();
    const float adjustedY = phase.y() + normSrcRect.y() * scale.height();
    localMatrix.setTranslate(SkFloatToScalar(adjustedX), SkFloatToScalar(adjustedY));

    sk_sp<SkShader> shader;
    SkFilterQuality filterLevel = static_cast<SkFilterQuality>(resampling);

    // Bicubic filter is only applied to defer-decoded images, see
    // NativeImageSkia::draw for details.
    if (resampling == InterpolationHigh && !isLazyDecoded) {
        // Do nice resampling.
        filterLevel = kNone_SkFilterQuality;
        float scaleX = destBitmapWidth / normSrcRect.width();
        float scaleY = destBitmapHeight / normSrcRect.height();
        SkRect scaledSrcRect;

        // Since we are resizing the bitmap, we need to remove the scale
        // applied to the pixels in the bitmap shader. This means we need
        // CTM * localMatrix to have identity scale. Since we
        // can't modify CTM (or the rectangle will be drawn in the wrong
        // place), we must set localMatrix's scale to the inverse of
        // CTM scale.
        localMatrix.preScale(ctmScaleX ? 1 / ctmScaleX : 1, ctmScaleY ? 1 / ctmScaleY : 1);

        // The image fragment generated here is not exactly what is
        // requested. The scale factor used is approximated and image
        // fragment is slightly larger to align to integer
        // boundaries.
        SkBitmap resampled = extractScaledImageFragment(normSrcRect, scaleX, scaleY, &scaledSrcRect);
        if (repeatSpacing.isZero()) {
            shader = SkShader::MakeBitmapShader(resampled, SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode, &localMatrix);
        } else {
            shader = SkShader::MakeBitmapShader(
                createBitmapWithSpace(resampled, repeatSpacing.width() * ctmScaleX, repeatSpacing.height() * ctmScaleY),
                SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode, &localMatrix);
        }
    } else {
        // Because no resizing occurred, the shader transform should be
        // set to the pattern's transform, which just includes scale.
        localMatrix.preScale(scale.width(), scale.height());

        // No need to resample before drawing.
        SkBitmap srcSubset;
        bitmap().extractSubset(&srcSubset, enclosingIntRect(normSrcRect));
        if (repeatSpacing.isZero()) {
            shader = SkShader::MakeBitmapShader(srcSubset, SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode, &localMatrix);
        } else {
            shader = SkShader::MakeBitmapShader(
                createBitmapWithSpace(srcSubset, repeatSpacing.width() * ctmScaleX, repeatSpacing.height() * ctmScaleY),
                SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode, &localMatrix);
        }
    }

    SkPaint paint;
    paint.setShader(shader);
    paint.setXfermodeMode(WebCoreCompositeToSkiaComposite(compositeOp, blendMode));
    paint.setColorFilter(sk_ref_sp(context->colorFilter()));
    paint.setFilterQuality(filterLevel);
    context->drawRect(destRect, paint);
}
Ejemplo n.º 17
0
IntRect::operator SkRect() const
{
    SkRect rect;
    rect.set(SkIntToScalar(x()), SkIntToScalar(y()), SkIntToScalar(maxX()), SkIntToScalar(maxY()));
    return rect;
}
bool VideoLayerAndroid::drawGL(bool layerTilesDisabled)
{
    // Lazily allocated the textures.
    TilesManager* tilesManager = TilesManager::instance();
    VideoLayerManager* manager = tilesManager->videoLayerManager();
    manager->initGLResourcesIfNeeded();

    ShaderProgram* shader = tilesManager->shader();

    SkRect rect = SkRect::MakeSize(getSize());
    GLfloat surfaceMatrix[16];

    // Calculate the video rect based on the aspect ratio and the element rect.
    SkRect videoRect = calVideoRect(rect);
    PureColorQuadData pureColorQuadData(Color(0, 0, 0, 255), LayerQuad,
                                        &m_drawTransform, &rect);

    if (videoRect != rect) {
        // Paint the whole video element with black color when video content
        // can't cover the whole area.
        shader->drawQuad(&pureColorQuadData);
    }

    // Inner rect is for the progressing / play / pause animation.
    SkRect innerRect = SkRect::MakeWH(manager->getButtonSize(),
                                      manager->getButtonSize());
    if (innerRect.contains(videoRect))
        innerRect = videoRect;
    double buttonSize = manager->getButtonSize();
    innerRect.offset(videoRect.fLeft + (videoRect.width() - buttonSize) / 2,
                     videoRect.fTop + (videoRect.height() - buttonSize) / 2);

    // When we are drawing the animation of the play/pause button in the
    // middle of the video, we need to ask for redraw.
    bool needRedraw = false;
    TextureQuadData iconQuadData(0, GL_TEXTURE_2D, GL_LINEAR, LayerQuad,
                                 &m_drawTransform, &innerRect);
    // Draw the poster image, the progressing image or the Video depending
    // on the player's state.
    if (m_playerState == PREPARING) {
        // Show the progressing animation, with two rotating circles
        showPreparingAnimation(videoRect, innerRect);
        needRedraw = true;
    } else if (m_playerState == PLAYING && m_surfaceTexture.get()) {
        // Show the real video.
        m_surfaceTexture->updateTexImage();
        m_surfaceTexture->getTransformMatrix(surfaceMatrix);
        GLuint textureId = manager->getTextureId(uniqueId());
        shader->drawVideoLayerQuad(m_drawTransform, surfaceMatrix,
                                   videoRect, textureId);
        manager->updateMatrix(uniqueId(), surfaceMatrix);

        // Use the scale to control the fading the sizing during animation
        double scale = manager->drawIcon(uniqueId(), PlayIcon);
        if (scale) {
            innerRect.inset(manager->getButtonSize() / 4 * scale,
                            manager->getButtonSize() / 4 * scale);
            iconQuadData.updateTextureId(manager->getPlayTextureId());
            iconQuadData.updateOpacity(scale);
            shader->drawQuad(&iconQuadData);
            needRedraw = true;
        }
    } else {
        GLuint textureId = manager->getTextureId(uniqueId());
        GLfloat* matrix = manager->getMatrix(uniqueId());
        if (textureId && matrix) {
            // Show the screen shot for each video.
            shader->drawVideoLayerQuad(m_drawTransform, matrix,
                                       videoRect, textureId);
        } else {
            // Show the static poster b/c there is no screen shot available.
            pureColorQuadData.updateColor(Color(128, 128, 128, 255));
            shader->drawQuad(&pureColorQuadData);

            iconQuadData.updateTextureId(manager->getPosterTextureId());
            iconQuadData.updateOpacity(1.0);
            shader->drawQuad(&iconQuadData);
        }

        // Use the scale to control the fading and the sizing during animation.
        double scale = manager->drawIcon(uniqueId(), PauseIcon);
        if (scale) {
            innerRect.inset(manager->getButtonSize() / 4 * scale,
                            manager->getButtonSize() / 4 * scale);
            iconQuadData.updateTextureId(manager->getPauseTextureId());
            iconQuadData.updateOpacity(scale);
            shader->drawQuad(&iconQuadData);
            needRedraw = true;
        }

    }
    return needRedraw;
}
void RenderNode::pushLayerUpdate(TreeInfo& info) {
    LayerType layerType = properties().effectiveLayerType();
    // If we are not a layer OR we cannot be rendered (eg, view was detached)
    // we need to destroy any Layers we may have had previously
    if (CC_LIKELY(layerType != LayerType::RenderLayer) || CC_UNLIKELY(!isRenderable())) {
        if (CC_UNLIKELY(mLayer)) {
            destroyLayer(mLayer);
            mLayer = nullptr;
        }
        return;
    }

    bool transformUpdateNeeded = false;
    if (!mLayer) {
        mLayer = createLayer(info.canvasContext.getRenderState(), getWidth(), getHeight());
#if !HWUI_NEW_OPS
        applyLayerPropertiesToLayer(info);
#endif
        damageSelf(info);
        transformUpdateNeeded = true;
    } else if (!layerMatchesWidthAndHeight(mLayer, getWidth(), getHeight())) {
#if HWUI_NEW_OPS
        // TODO: remove now irrelevant, currently enqueued damage (respecting damage ordering)
        // Or, ideally, maintain damage between frames on node/layer so ordering is always correct
        RenderState& renderState = mLayer->renderState;
        if (properties().fitsOnLayer()) {
            mLayer = renderState.layerPool().resize(mLayer, getWidth(), getHeight());
        } else {
#else
        if (!LayerRenderer::resizeLayer(mLayer, getWidth(), getHeight())) {
#endif
            destroyLayer(mLayer);
            mLayer = nullptr;
        }
        damageSelf(info);
        transformUpdateNeeded = true;
    }

    SkRect dirty;
    info.damageAccumulator->peekAtDirty(&dirty);

    if (!mLayer) {
        Caches::getInstance().dumpMemoryUsage();
        if (info.errorHandler) {
            std::ostringstream err;
            err << "Unable to create layer for " << getName();
            const int maxTextureSize = Caches::getInstance().maxTextureSize;
            if (getWidth() > maxTextureSize || getHeight() > maxTextureSize) {
                err << ", size " << getWidth() << "x" << getHeight()
                        << " exceeds max size " << maxTextureSize;
            } else {
                err << ", see logcat for more info";
            }
            info.errorHandler->onError(err.str());
        }
        return;
    }

    if (transformUpdateNeeded && mLayer) {
        // update the transform in window of the layer to reset its origin wrt light source position
        Matrix4 windowTransform;
        info.damageAccumulator->computeCurrentTransform(&windowTransform);
        mLayer->setWindowTransform(windowTransform);
    }

#if HWUI_NEW_OPS
    info.layerUpdateQueue->enqueueLayerWithDamage(this, dirty);
#else
    if (dirty.intersect(0, 0, getWidth(), getHeight())) {
        dirty.roundOut(&dirty);
        mLayer->updateDeferred(this, dirty.fLeft, dirty.fTop, dirty.fRight, dirty.fBottom);
    }
    // This is not inside the above if because we may have called
    // updateDeferred on a previous prepare pass that didn't have a renderer
    if (info.renderer && mLayer->deferredUpdateScheduled) {
        info.renderer->pushLayerUpdate(mLayer);
    }
#endif

    // There might be prefetched layers that need to be accounted for.
    // That might be us, so tell CanvasContext that this layer is in the
    // tree and should not be destroyed.
    info.canvasContext.markLayerInUse(this);
}

/**
 * Traverse down the the draw tree to prepare for a frame.
 *
 * MODE_FULL = UI Thread-driven (thus properties must be synced), otherwise RT driven
 *
 * While traversing down the tree, functorsNeedLayer flag is set to true if anything that uses the
 * stencil buffer may be needed. Views that use a functor to draw will be forced onto a layer.
 */
void RenderNode::prepareTreeImpl(TreeInfo& info, bool functorsNeedLayer) {
    info.damageAccumulator->pushTransform(this);

    if (info.mode == TreeInfo::MODE_FULL) {
        pushStagingPropertiesChanges(info);
    }
    uint32_t animatorDirtyMask = 0;
    if (CC_LIKELY(info.runAnimations)) {
        animatorDirtyMask = mAnimatorManager.animate(info);
    }

    bool willHaveFunctor = false;
    if (info.mode == TreeInfo::MODE_FULL && mStagingDisplayList) {
        willHaveFunctor = !mStagingDisplayList->getFunctors().empty();
    } else if (mDisplayList) {
        willHaveFunctor = !mDisplayList->getFunctors().empty();
    }
    bool childFunctorsNeedLayer = mProperties.prepareForFunctorPresence(
            willHaveFunctor, functorsNeedLayer);

    if (CC_UNLIKELY(mPositionListener.get())) {
        mPositionListener->onPositionUpdated(*this, info);
    }

    prepareLayer(info, animatorDirtyMask);
    if (info.mode == TreeInfo::MODE_FULL) {
        pushStagingDisplayListChanges(info);
    }
    prepareSubTree(info, childFunctorsNeedLayer, mDisplayList);
    pushLayerUpdate(info);

    info.damageAccumulator->popTransform();
}
Ejemplo n.º 20
0
static void paintSkBitmap(PlatformContextSkia* platformContext, const NativeImageSkia& bitmap, const SkRect& srcRect, const SkRect& destRect, const SkXfermode::Mode& compOp)
{
    TRACE_EVENT0("skia", "paintSkBitmap");
    SkPaint paint;
    paint.setXfermodeMode(compOp);
    paint.setAlpha(platformContext->getNormalizedAlpha());
    paint.setLooper(platformContext->getDrawLooper());
    // only antialias if we're rotated or skewed
    paint.setAntiAlias(hasNon90rotation(platformContext));

    ResamplingMode resampling;
    if (platformContext->isAccelerated())
        resampling = RESAMPLE_LINEAR;
    else if (platformContext->printing())
        resampling = RESAMPLE_NONE;
    else {
        // Take into account scale applied to the canvas when computing sampling mode (e.g. CSS scale or page scale).
        SkRect destRectTarget = destRect;
        if (!(platformContext->getTotalMatrix().getType() & (SkMatrix::kAffine_Mask | SkMatrix::kPerspective_Mask)))
            platformContext->getTotalMatrix().mapRect(&destRectTarget, destRect);

        resampling = computeResamplingMode(platformContext->getTotalMatrix(), bitmap,
            SkScalarToFloat(srcRect.width()), SkScalarToFloat(srcRect.height()),
            SkScalarToFloat(destRectTarget.width()), SkScalarToFloat(destRectTarget.height()));
    }

    if (resampling == RESAMPLE_NONE) {
        // FIXME: This is to not break tests (it results in the filter bitmap flag
        // being set to true). We need to decide if we respect RESAMPLE_NONE
        // being returned from computeResamplingMode.
        resampling = RESAMPLE_LINEAR;
    }
    resampling = limitResamplingMode(platformContext, resampling);
    paint.setFilterBitmap(resampling == RESAMPLE_LINEAR);
    if (resampling == RESAMPLE_AWESOME)
        drawResampledBitmap(platformContext, paint, bitmap, srcRect, destRect);
    else {
        // No resampling necessary, we can just draw the bitmap. We want to
        // filter it if we decided to do linear interpolation above, or if there
        // is something interesting going on with the matrix (like a rotation).
        // Note: for serialization, we will want to subset the bitmap first so
        // we don't send extra pixels.
        SkIRect enclosingSrcRect;
        SkRect enclosingDestRect;
        SkISize bitmapSize = SkISize::Make(bitmap.bitmap().width(), bitmap.bitmap().height());
        bool needsClipping = computeBitmapDrawRects(bitmapSize, srcRect, destRect, &enclosingSrcRect, &enclosingDestRect);

        if (enclosingSrcRect.isEmpty() || enclosingDestRect.isEmpty())
            return;

        // If destination is enlarged because source rectangle didn't align to
        // integer boundaries then we draw a slightly larger rectangle and clip
        // to the original destination rectangle.
        // See http://crbug.com/145540.
        if (needsClipping) {
            platformContext->save();
            platformContext->clipRect(destRect);
        }

        platformContext->drawBitmapRect(bitmap.bitmap(), &enclosingSrcRect, enclosingDestRect, &paint);

        if (needsClipping)
            platformContext->restore();
    }
    platformContext->didDrawRect(destRect, paint, &bitmap.bitmap());
}
Ejemplo n.º 21
0
SkRect create_rect(const SkPoint& offset) {
    SkRect r = SkRect::MakeLTRB(kMin, kMin, kMax, kMax);
    r.offset(offset);
    return r;
}
Ejemplo n.º 22
0
void Image::drawPattern(GraphicsContext* context,
                        const FloatRect& floatSrcRect,
                        const AffineTransform& patternTransform,
                        const FloatPoint& phase,
                        ColorSpace styleColorSpace,
                        CompositeOperator compositeOp,
                        const FloatRect& destRect,
                        BlendMode)
{
    TRACE_EVENT0("skia", "Image::drawPattern");
    RefPtr<NativeImageSkia> bitmap = nativeImageForCurrentFrame();
    if (!bitmap)
        return;

    FloatRect normSrcRect = normalizeRect(floatSrcRect);
    normSrcRect.intersect(FloatRect(0, 0, bitmap->bitmap().width(), bitmap->bitmap().height()));
    if (destRect.isEmpty() || normSrcRect.isEmpty())
        return; // nothing to draw

    SkMatrix ctm = context->platformContext()->getTotalMatrix();
    SkMatrix totalMatrix;
    totalMatrix.setConcat(ctm, patternTransform);

    // Figure out what size the bitmap will be in the destination. The
    // destination rect is the bounds of the pattern, we need to use the
    // matrix to see how big it will be.
    SkRect destRectTarget;
    totalMatrix.mapRect(&destRectTarget, normSrcRect);

    float destBitmapWidth = SkScalarToFloat(destRectTarget.width());
    float destBitmapHeight = SkScalarToFloat(destRectTarget.height());

    // Compute the resampling mode.
    ResamplingMode resampling;
    if (context->platformContext()->isAccelerated() || context->platformContext()->printing())
        resampling = RESAMPLE_LINEAR;
    else
        resampling = computeResamplingMode(totalMatrix, *bitmap, normSrcRect.width(), normSrcRect.height(), destBitmapWidth, destBitmapHeight);
    resampling = limitResamplingMode(context->platformContext(), resampling);

    // Load the transform WebKit requested.
    SkMatrix matrix(patternTransform);

    SkShader* shader;
    if (resampling == RESAMPLE_AWESOME) {
        // Do nice resampling.
        float scaleX = destBitmapWidth / normSrcRect.width();
        float scaleY = destBitmapHeight / normSrcRect.height();
        SkRect scaledSrcRect;
        SkIRect enclosingScaledSrcRect;

        // The image fragment generated here is not exactly what is
        // requested. The scale factor used is approximated and image
        // fragment is slightly larger to align to integer
        // boundaries.
        SkBitmap resampled = extractScaledImageFragment(*bitmap, normSrcRect, scaleX, scaleY, &scaledSrcRect, &enclosingScaledSrcRect);
        shader = SkShader::CreateBitmapShader(resampled, SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode);

        // Since we just resized the bitmap, we need to remove the scale
        // applied to the pixels in the bitmap shader. This means we need
        // CTM * patternTransform to have identity scale. Since we
        // can't modify CTM (or the rectangle will be drawn in the wrong
        // place), we must set patternTransform's scale to the inverse of
        // CTM scale.
        matrix.setScaleX(ctm.getScaleX() ? 1 / ctm.getScaleX() : 1);
        matrix.setScaleY(ctm.getScaleY() ? 1 / ctm.getScaleY() : 1);
    } else {
        // No need to do nice resampling.
        SkBitmap srcSubset;
        bitmap->bitmap().extractSubset(&srcSubset, enclosingIntRect(normSrcRect));
        shader = SkShader::CreateBitmapShader(srcSubset, SkShader::kRepeat_TileMode, SkShader::kRepeat_TileMode);
    }

    // We also need to translate it such that the origin of the pattern is the
    // origin of the destination rect, which is what WebKit expects. Skia uses
    // the coordinate system origin as the base for the patter. If WebKit wants
    // a shifted image, it will shift it from there using the patternTransform.
    float adjustedX = phase.x() + normSrcRect.x() *
                      narrowPrecisionToFloat(patternTransform.a());
    float adjustedY = phase.y() + normSrcRect.y() *
                      narrowPrecisionToFloat(patternTransform.d());
    matrix.postTranslate(SkFloatToScalar(adjustedX),
                         SkFloatToScalar(adjustedY));
    shader->setLocalMatrix(matrix);

    SkPaint paint;
    paint.setShader(shader)->unref();
    paint.setXfermodeMode(WebCoreCompositeToSkiaComposite(compositeOp));
    paint.setFilterBitmap(resampling == RESAMPLE_LINEAR);

    context->platformContext()->drawRect(destRect, paint);
}
Ejemplo n.º 23
0
bool GrDrawTarget::setupDstReadIfNecessary(const GrPipelineBuilder& pipelineBuilder,
                                           const GrProcOptInfo& colorPOI,
                                           const GrProcOptInfo& coveragePOI,
                                           GrXferProcessor::DstTexture* dstTexture,
                                           const SkRect& batchBounds) {
    SkRect bounds = batchBounds;
    bounds.outset(0.5f, 0.5f);

    if (!pipelineBuilder.willXPNeedDstTexture(*this->caps(), colorPOI, coveragePOI)) {
        return true;
    }

    GrRenderTarget* rt = pipelineBuilder.getRenderTarget();

    if (this->caps()->textureBarrierSupport()) {
        if (GrTexture* rtTex = rt->asTexture()) {
            // The render target is a texture, so we can read from it directly in the shader. The XP
            // will be responsible to detect this situation and request a texture barrier.
            dstTexture->setTexture(rtTex);
            dstTexture->setOffset(0, 0);
            return true;
        }
    }

    SkIRect copyRect;
    pipelineBuilder.clip().getConservativeBounds(rt, &copyRect);

    SkIRect drawIBounds;
    bounds.roundOut(&drawIBounds);
    if (!copyRect.intersect(drawIBounds)) {
#ifdef SK_DEBUG
        GrCapsDebugf(this->caps(), "Missed an early reject. "
                                   "Bailing on draw from setupDstReadIfNecessary.\n");
#endif
        return false;
    }

    // MSAA consideration: When there is support for reading MSAA samples in the shader we could
    // have per-sample dst values by making the copy multisampled.
    GrSurfaceDesc desc;
    if (!fGpu->initCopySurfaceDstDesc(rt, &desc)) {
        desc.fOrigin = kDefault_GrSurfaceOrigin;
        desc.fFlags = kRenderTarget_GrSurfaceFlag;
        desc.fConfig = rt->config();
    }

    desc.fWidth = copyRect.width();
    desc.fHeight = copyRect.height();

    static const uint32_t kFlags = 0;
    SkAutoTUnref<GrTexture> copy(fResourceProvider->createApproxTexture(desc, kFlags));

    if (!copy) {
        SkDebugf("Failed to create temporary copy of destination texture.\n");
        return false;
    }
    SkIPoint dstPoint = {0, 0};
    this->copySurface(copy, rt, copyRect, dstPoint);
    dstTexture->setTexture(copy);
    dstTexture->setOffset(copyRect.fLeft, copyRect.fTop);
    return true;
}
Ejemplo n.º 24
0
static void paintSkBitmap(PlatformContextSkia* platformContext, const NativeImageSkia& bitmap, const SkIRect& srcRect, const SkRect& destRect, const SkXfermode::Mode& compOp)
{
#if PLATFORM(CHROMIUM)
    TRACE_EVENT("paintSkBitmap", platformContext, 0);
#endif
    SkPaint paint;
    paint.setXfermodeMode(compOp);
    paint.setFilterBitmap(true);
    paint.setAlpha(platformContext->getNormalizedAlpha());
    paint.setLooper(platformContext->getDrawLooper());
    // only antialias if we're rotated or skewed
    paint.setAntiAlias(hasNon90rotation(platformContext));

    SkCanvas* canvas = platformContext->canvas();

    ResamplingMode resampling;
    if (platformContext->isAccelerated())
        resampling = RESAMPLE_LINEAR;
    else
        resampling = platformContext->printing() ? RESAMPLE_NONE :
            computeResamplingMode(platformContext, bitmap, srcRect.width(), srcRect.height(), SkScalarToFloat(destRect.width()), SkScalarToFloat(destRect.height()));
    if (resampling == RESAMPLE_AWESOME) {
        drawResampledBitmap(*canvas, paint, bitmap, srcRect, destRect);
    } else {
        // No resampling necessary, we can just draw the bitmap. We want to
        // filter it if we decided to do linear interpolation above, or if there
        // is something interesting going on with the matrix (like a rotation).
        // Note: for serialization, we will want to subset the bitmap first so
        // we don't send extra pixels.
        canvas->drawBitmapRect(bitmap.bitmap(), &srcRect, destRect, &paint);
    }
    platformContext->didDrawRect(destRect, paint, &bitmap.bitmap());
}
Ejemplo n.º 25
0
    virtual void onDraw(SkCanvas* canvas) {
        static const int kBmpSize = 2048;
        if (fLargeBitmap.isNull()) {
            makebm(&fLargeBitmap, kBmpSize, kBmpSize);
        }
        SkRect dstRect = { 0, 0, SkIntToScalar(64), SkIntToScalar(64)};
        static const int kMaxSrcRectSize = 1 << (SkNextLog2(kBmpSize) + 2);

        static const int kPadX = 30;
        static const int kPadY = 40;
        SkPaint paint;
        paint.setAlpha(0x20);
        canvas->drawBitmapRect(fLargeBitmap, NULL,
                               SkRect::MakeWH(gSize * SK_Scalar1,
                                              gSize * SK_Scalar1),
                               &paint);
        canvas->translate(SK_Scalar1 * kPadX / 2,
                          SK_Scalar1 * kPadY / 2);
        SkPaint blackPaint;
        SkScalar titleHeight = SK_Scalar1 * 24;
        blackPaint.setColor(SK_ColorBLACK);
        blackPaint.setTextSize(titleHeight);
        blackPaint.setAntiAlias(true);
        SkString title;
        title.printf("Bitmap size: %d x %d", kBmpSize, kBmpSize);
        canvas->drawText(title.c_str(), title.size(), 0,
                         titleHeight, blackPaint);

        canvas->translate(0, SK_Scalar1 * kPadY / 2  + titleHeight);
        int rowCount = 0;
        canvas->save();
        for (int w = 1; w <= kMaxSrcRectSize; w *= 4) {
            for (int h = 1; h <= kMaxSrcRectSize; h *= 4) {

                SkIRect srcRect = SkIRect::MakeXYWH((kBmpSize - w) / 2,
                                                    (kBmpSize - h) / 2,
                                                    w, h);
                canvas->drawBitmapRect(fLargeBitmap, &srcRect, dstRect);

                SkString label;
                label.appendf("%d x %d", w, h);
                blackPaint.setAntiAlias(true);
                blackPaint.setStyle(SkPaint::kFill_Style);
                blackPaint.setTextSize(SK_Scalar1 * 10);
                SkScalar baseline = dstRect.height() +
                                    blackPaint.getTextSize() + SK_Scalar1 * 3;
                canvas->drawText(label.c_str(), label.size(),
                                    0, baseline,
                                    blackPaint);
                blackPaint.setStyle(SkPaint::kStroke_Style);
                blackPaint.setStrokeWidth(SK_Scalar1);
                blackPaint.setAntiAlias(false);
                canvas->drawRect(dstRect, blackPaint);

                canvas->translate(dstRect.width() + SK_Scalar1 * kPadX, 0);
                ++rowCount;
                if ((dstRect.width() + kPadX) * rowCount > gSize) {
                    canvas->restore();
                    canvas->translate(0, dstRect.height() + SK_Scalar1 * kPadY);
                    canvas->save();
                    rowCount = 0;
                }
            }
        }

        {
            // test the following code path:
            // SkGpuDevice::drawPath() -> SkGpuDevice::drawWithMaskFilter()
            SkIRect srcRect;
            SkPaint paint;
            SkBitmap bm;

            bm = make_chessbm(5, 5);
            paint.setFilterLevel(SkPaint::kLow_FilterLevel);

            srcRect.setXYWH(1, 1, 3, 3);
            SkMaskFilter* mf = SkBlurMaskFilter::Create(
                kNormal_SkBlurStyle,
                SkBlurMask::ConvertRadiusToSigma(SkIntToScalar(5)),
                SkBlurMaskFilter::kHighQuality_BlurFlag |
                SkBlurMaskFilter::kIgnoreTransform_BlurFlag);
            paint.setMaskFilter(mf)->unref();
            canvas->drawBitmapRect(bm, &srcRect, dstRect, &paint);
        }
    }
Ejemplo n.º 26
0
    PathClipView() {
        fOval.set(0, 0, SkIntToScalar(200), SkIntToScalar(50));
        fCenter.set(SkIntToScalar(250), SkIntToScalar(250));

//        test_ats();
    }
Ejemplo n.º 27
0
static void convolve_gaussian(GrDrawContext* drawContext,
                              GrRenderTarget* rt,
                              const GrClip& clip,
                              const SkRect& srcRect,
                              const SkRect& dstRect,
                              GrTexture* texture,
                              Gr1DKernelEffect::Direction direction,
                              int radius,
                              float sigma,
                              bool cropToSrcRect) {
    float bounds[2] = { 0.0f, 1.0f };
    if (!cropToSrcRect) {
        convolve_gaussian_1d(drawContext, rt, clip, srcRect, dstRect, texture,
                             direction, radius, sigma, false, bounds);
        return;
    }
    SkRect lowerSrcRect = srcRect, lowerDstRect = dstRect;
    SkRect middleSrcRect = srcRect, middleDstRect = dstRect;
    SkRect upperSrcRect = srcRect, upperDstRect = dstRect;
    SkScalar size;
    SkScalar rad = SkIntToScalar(radius);
    if (direction == Gr1DKernelEffect::kX_Direction) {
        bounds[0] = SkScalarToFloat(srcRect.left()) / texture->width();
        bounds[1] = SkScalarToFloat(srcRect.right()) / texture->width();
        size = srcRect.width();
        lowerSrcRect.fRight = srcRect.left() + rad;
        lowerDstRect.fRight = dstRect.left() + rad;
        upperSrcRect.fLeft = srcRect.right() - rad;
        upperDstRect.fLeft = dstRect.right() - rad;
        middleSrcRect.inset(rad, 0);
        middleDstRect.inset(rad, 0);
    } else {
        bounds[0] = SkScalarToFloat(srcRect.top()) / texture->height();
        bounds[1] = SkScalarToFloat(srcRect.bottom()) / texture->height();
        size = srcRect.height();
        lowerSrcRect.fBottom = srcRect.top() + rad;
        lowerDstRect.fBottom = dstRect.top() + rad;
        upperSrcRect.fTop = srcRect.bottom() - rad;
        upperDstRect.fTop = dstRect.bottom() - rad;
        middleSrcRect.inset(0, rad);
        middleDstRect.inset(0, rad);
    }
    if (radius >= size * SK_ScalarHalf) {
        // Blur radius covers srcRect; use bounds over entire draw
        convolve_gaussian_1d(drawContext, rt, clip, srcRect, dstRect, texture,
                            direction, radius, sigma, true, bounds);
    } else {
        // Draw upper and lower margins with bounds; middle without.
        convolve_gaussian_1d(drawContext, rt, clip, lowerSrcRect, lowerDstRect, texture,
                             direction, radius, sigma, true, bounds);
        convolve_gaussian_1d(drawContext, rt, clip, upperSrcRect, upperDstRect, texture,
                             direction, radius, sigma, true, bounds);
        convolve_gaussian_1d(drawContext, rt, clip, middleSrcRect, middleDstRect, texture,
                             direction, radius, sigma, false, bounds);
    }
}
Ejemplo n.º 28
0
static void make_path_line(SkPath* path, const SkRect& bounds) {
    path->moveTo(bounds.left(), bounds.top());
    path->lineTo(bounds.right(), bounds.bottom());
}
static void TestDeferredCanvasFreshFrame(skiatest::Reporter* reporter) {
    SkBitmap store;
    SkRect fullRect;
    fullRect.setXYWH(SkIntToScalar(0), SkIntToScalar(0), SkIntToScalar(gWidth),
        SkIntToScalar(gHeight));
    SkRect partialRect;
    partialRect.setXYWH(SkIntToScalar(0), SkIntToScalar(0),
        SkIntToScalar(1), SkIntToScalar(1));
    create(&store, SkBitmap::kARGB_8888_Config, 0xFFFFFFFF);
    SkDevice device(store);
    SkDeferredCanvas canvas(&device);

    // verify that frame is intially fresh
    REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());
    // no clearing op since last call to isFreshFrame -> not fresh
    REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());

    // Verify that clear triggers a fresh frame
    canvas.clear(0x00000000);
    REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());

    // Verify that clear with saved state triggers a fresh frame
    canvas.save(SkCanvas::kMatrixClip_SaveFlag);
    canvas.clear(0x00000000);
    canvas.restore();
    REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());

    // Verify that clear within a layer does NOT trigger a fresh frame
    canvas.saveLayer(NULL, NULL, SkCanvas::kARGB_ClipLayer_SaveFlag);
    canvas.clear(0x00000000);
    canvas.restore();
    REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());

    // Verify that a clear with clipping triggers a fresh frame
    // (clear is not affected by clipping)
    canvas.save(SkCanvas::kMatrixClip_SaveFlag);
    canvas.clipRect(partialRect, SkRegion::kIntersect_Op, false);
    canvas.clear(0x00000000);
    canvas.restore();
    REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());    

    // Verify that full frame rects with different forms of opaque paint
    // trigger frames to be marked as fresh
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kFill_Style );
        paint.setAlpha( 255 );
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());
    }
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kFill_Style );
        SkBitmap bmp;
        create(&bmp, SkBitmap::kARGB_8888_Config, 0xFFFFFFFF);
        bmp.setIsOpaque(true);
        SkShader* shader = SkShader::CreateBitmapShader(bmp, 
            SkShader::kClamp_TileMode, SkShader::kClamp_TileMode);
        paint.setShader(shader)->unref();
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, canvas.getDeferredDevice()->isFreshFrame());        
    }

    // Verify that full frame rects with different forms of non-opaque paint
    // do not trigger frames to be marked as fresh
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kFill_Style );
        paint.setAlpha( 254 );
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());
    }
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kFill_Style );
        SkBitmap bmp;
        create(&bmp, SkBitmap::kARGB_8888_Config, 0xFFFFFFFF);
        bmp.setIsOpaque(false);
        SkShader* shader = SkShader::CreateBitmapShader(bmp, 
            SkShader::kClamp_TileMode, SkShader::kClamp_TileMode);
        paint.setShader(shader)->unref();
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());        
    }

    // Verify that incomplete coverage does not trigger a fresh frame
    {
        SkPaint paint;
        paint.setStyle(SkPaint::kFill_Style);
        paint.setAlpha(255);
        canvas.drawRect(partialRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());
    }

    // Verify that incomplete coverage due to clipping does not trigger a fresh
    // frame
    {
        canvas.save(SkCanvas::kMatrixClip_SaveFlag);
        canvas.clipRect(partialRect, SkRegion::kIntersect_Op, false);
        SkPaint paint;
        paint.setStyle(SkPaint::kFill_Style);
        paint.setAlpha(255);
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());
    }

    // Verify that stroked rect does not trigger a fresh frame
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kStroke_Style );
        paint.setAlpha( 255 );
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());
    }
    
    // Verify kSrcMode triggers a fresh frame even with transparent color
    {
        SkPaint paint;
        paint.setStyle( SkPaint::kFill_Style );
        paint.setAlpha( 100 );
        paint.setXfermodeMode(SkXfermode::kSrc_Mode);
        canvas.drawRect(fullRect, paint);
        REPORTER_ASSERT(reporter, !canvas.getDeferredDevice()->isFreshFrame());
    }
}
Ejemplo n.º 30
0
GrDrawAtlasBatch::GrDrawAtlasBatch(const Geometry& geometry, const SkMatrix& viewMatrix,
                                   int spriteCount, const SkRSXform* xforms, const SkRect* rects,
                                   const SkColor* colors)
    : INHERITED(ClassID()) {
    SkASSERT(xforms);
    SkASSERT(rects);

    fViewMatrix = viewMatrix;
    Geometry& installedGeo = fGeoData.push_back(geometry);

    // Figure out stride and offsets
    // Order within the vertex is: position [color] texCoord
    size_t texOffset = sizeof(SkPoint);
    size_t vertexStride = 2*sizeof(SkPoint);
    fHasColors = SkToBool(colors);
    if (colors) {
        texOffset += sizeof(GrColor);
        vertexStride += sizeof(GrColor);
    }

    // Compute buffer size and alloc buffer
    fQuadCount = spriteCount;
    int allocSize = static_cast<int>(4*vertexStride*spriteCount);
    installedGeo.fVerts.reset(allocSize);
    uint8_t* currVertex = installedGeo.fVerts.begin();

    SkRect bounds;
    bounds.setLargestInverted();
    int paintAlpha = GrColorUnpackA(installedGeo.fColor);
    for (int spriteIndex = 0; spriteIndex < spriteCount; ++spriteIndex) {
        // Transform rect
        SkPoint quad[4];
        const SkRect& currRect = rects[spriteIndex];
        xforms[spriteIndex].toQuad(currRect.width(), currRect.height(), quad);

        // Copy colors if necessary
        if (colors) {
            // convert to GrColor
            SkColor color = colors[spriteIndex];
            if (paintAlpha != 255) {
                color = SkColorSetA(color, SkMulDiv255Round(SkColorGetA(color), paintAlpha));
            }
            GrColor grColor = SkColorToPremulGrColor(color);

            *(reinterpret_cast<GrColor*>(currVertex+sizeof(SkPoint))) = grColor;
            *(reinterpret_cast<GrColor*>(currVertex+vertexStride+sizeof(SkPoint))) = grColor;
            *(reinterpret_cast<GrColor*>(currVertex+2*vertexStride+sizeof(SkPoint))) = grColor;
            *(reinterpret_cast<GrColor*>(currVertex+3*vertexStride+sizeof(SkPoint))) = grColor;
        }

        // Copy position and uv to verts
        *(reinterpret_cast<SkPoint*>(currVertex)) = quad[0];
        *(reinterpret_cast<SkPoint*>(currVertex+texOffset)) = SkPoint::Make(currRect.fLeft,
                                                                            currRect.fTop);
        bounds.growToInclude(quad[0].fX, quad[0].fY);
        currVertex += vertexStride;

        *(reinterpret_cast<SkPoint*>(currVertex)) = quad[1];
        *(reinterpret_cast<SkPoint*>(currVertex+texOffset)) = SkPoint::Make(currRect.fRight,
                                                                            currRect.fTop);
        bounds.growToInclude(quad[1].fX, quad[1].fY);
        currVertex += vertexStride;

        *(reinterpret_cast<SkPoint*>(currVertex)) = quad[2];
        *(reinterpret_cast<SkPoint*>(currVertex+texOffset)) = SkPoint::Make(currRect.fRight,
                                                                            currRect.fBottom);
        bounds.growToInclude(quad[2].fX, quad[2].fY);
        currVertex += vertexStride;

        *(reinterpret_cast<SkPoint*>(currVertex)) = quad[3];
        *(reinterpret_cast<SkPoint*>(currVertex+texOffset)) = SkPoint::Make(currRect.fLeft,
                                                                            currRect.fBottom);
        bounds.growToInclude(quad[3].fX, quad[3].fY);
        currVertex += vertexStride;
    }

    viewMatrix.mapRect(&bounds);
    // Outset for a half pixel in each direction to account for snapping in non-AA case
    bounds.outset(0.5f, 0.5f);
    this->setBounds(bounds);
}