void BRepOffsetAPI_MakeOffsetFix::MakeWire(TopoDS_Shape& wire)
{
// get the edges of the wire and check which of the stored edges
// serve as input of the wire
TopTools_MapOfShape aMap;
TopExp_Explorer xp(wire, TopAbs_EDGE);
while (xp.More()) {
aMap.Add(xp.Current());
xp.Next();
}
std::list<TopoDS_Edge> edgeList;
for (auto itLoc : myLocations) {
const TopTools_ListOfShape& newShapes = mkOffset.Generated(itLoc.first);
for (TopTools_ListIteratorOfListOfShape it(newShapes); it.More(); it.Next()) {
TopoDS_Shape newShape = it.Value();
if (aMap.Contains(newShape)) {
newShape.Move(itLoc.second);
edgeList.push_back(TopoDS::Edge(newShape));
}
}
}
if (!edgeList.empty()) {
BRepBuilderAPI_MakeWire mkWire;
mkWire.Add(edgeList.front());
edgeList.pop_front();
wire = mkWire.Wire();
bool found = false;
do {
found = false;
for (std::list<TopoDS_Edge>::iterator pE = edgeList.begin(); pE != edgeList.end(); ++pE) {
mkWire.Add(*pE);
if (mkWire.Error() != BRepBuilderAPI_DisconnectedWire) {
// edge added ==> remove it from list
found = true;
edgeList.erase(pE);
wire = mkWire.Wire();
break;
}
}
}
while (found);
}
}
//=======================================================================
// function: FillSameDomainFaces
// purpose:
//=======================================================================
void GEOMAlgo_Builder::FillSameDomainFaces()
{
Standard_Boolean bIsSDF, bHasImage1, bHasImage2, bForward;
Standard_Integer i, j, aNbFF, nF1, nF2, aNbPBInOn, aNbC, aNbSE;
Standard_Integer aNbF1, aNbF2, i2s, aNbSD;
TopTools_MapOfShape aMFence;
TopTools_ListOfShape aLX1, aLX2;
TopTools_ListIteratorOfListOfShape aItF1, aItF2;
NMTTools_ListOfCoupleOfShape aLCS;
//
const NMTDS_ShapesDataStructure& aDS=*myPaveFiller->DS();
NMTTools_PaveFiller* pPF=myPaveFiller;
NMTDS_InterfPool* pIP=pPF->IP();
BOPTools_CArray1OfSSInterference& aFFs=pIP->SSInterferences();
const Handle(IntTools_Context)& aCtx= pPF->Context();
//
//
//mySameDomainShapes.Clear();
//
// 1. For each FF find among images of faces
// all pairs of same domain faces (SDF) [=> aLCS]
aNbFF=aFFs.Extent();
for (i=1; i<=aNbFF; ++i) {
BOPTools_SSInterference& aFF=aFFs(i);
aFF.Indices(nF1, nF2);
//
const TopoDS_Face& aF1=TopoDS::Face(aDS.Shape(nF1));
const TopoDS_Face& aF2=TopoDS::Face(aDS.Shape(nF2));
//
// if there are no in/on 2D split parts the faces nF1, nF2
// can not be SDF
const BOPTools_ListOfPaveBlock& aLPBInOn=aFF.PaveBlocks();
aNbPBInOn=aLPBInOn.Extent();
//
//===
const TColStd_ListOfInteger& aLSE=aFF.SharedEdges();
aNbSE=aLSE.Extent();
if (!aNbPBInOn && !aNbSE) {
continue;
}
//===
//
// if there is at least one section edge between faces nF1, nF2
// they can not be SDF
BOPTools_SequenceOfCurves& aSC=aFF.Curves();
aNbC=aSC.Length();
if (aNbC) {
continue;
}
//
// the faces are suspected to be SDF.
// Try to find SDF among images of nF1, nF2
aMFence.Clear();
//
//--------------------------------------------------------
bHasImage1=mySplitFaces.HasImage(aF1);
bHasImage2=mySplitFaces.HasImage(aF2);
//
aLX1.Clear();
if (!bHasImage1) {
aLX1.Append(aF1);
}
//
aLX2.Clear();
if (!bHasImage2) {
aLX2.Append(aF2);
}
//
const TopTools_ListOfShape& aLF1r=(bHasImage1)? mySplitFaces.Image(aF1) : aLX1;
const TopTools_ListOfShape& aLF2r=(bHasImage2)? mySplitFaces.Image(aF2) : aLX2;
//
TopTools_DataMapOfIntegerShape aMIS;
TColStd_ListIteratorOfListOfInteger aItLI;
NMTDS_BoxBndTreeSelector aSelector;
NMTDS_BoxBndTree aBBTree;
NCollection_UBTreeFiller <Standard_Integer, Bnd_Box> aTreeFiller(aBBTree);
//
aNbF1=aLF1r.Extent();
aNbF2=aLF2r.Extent();
bForward=(aNbF1<aNbF2);
//
const TopTools_ListOfShape& aLF1=bForward ? aLF1r : aLF2r;
const TopTools_ListOfShape& aLF2=bForward ? aLF2r : aLF1r;
//
// 1. aTreeFiller
aItF2.Initialize(aLF2);
for (i2s=1; aItF2.More(); aItF2.Next(), ++i2s) {
Bnd_Box aBoxF2s;
//
const TopoDS_Face& aF2s=*((TopoDS_Face*)(&aItF2.Value()));
//
BRepBndLib::Add(aF2s, aBoxF2s);
//
aMIS.Bind(i2s, aF2s);
//
aTreeFiller.Add(i2s, aBoxF2s);
}//for (i2s=1; aItF2.More(); aItF2.Next(), ++i2s) {
//
aTreeFiller.Fill();
//
// 2.
aItF1.Initialize(aLF1);
for (j=1; aItF1.More(); aItF1.Next(), ++j) {
Bnd_Box aBoxF1x;
//
const TopoDS_Face& aF1x=*((TopoDS_Face*)(&aItF1.Value()));
//
BRepBndLib::Add(aF1x, aBoxF1x);
//
aSelector.Clear();
aSelector.SetBox(aBoxF1x);
aNbSD=aBBTree.Select(aSelector);
if (!aNbSD) {
continue;
}
//
const TColStd_ListOfInteger& aLI=aSelector.Indices();
aItLI.Initialize(aLI);
for (; aItLI.More(); aItLI.Next()) {
i2s=aItLI.Value();
const TopoDS_Face& aF2y=*((TopoDS_Face*)(&aMIS.Find(i2s)));
//
bIsSDF=NMTTools_Tools::AreFacesSameDomain(aF1x, aF2y, aCtx);
if (bIsSDF) {
if (aMFence.Contains(aF1x) || aMFence.Contains(aF2y)) {
continue;
}
aMFence.Add(aF1x);
aMFence.Add(aF2y);
//
NMTTools_CoupleOfShape aCS;
//
aCS.SetShape1(aF1x);
aCS.SetShape2(aF2y);
aLCS.Append(aCS);
//
if (bForward) {
if (aF1x==aF1) {
if (!mySplitFaces.HasImage(aF1)) {
mySplitFaces.Bind(aF1, aF1);
}
}
if (aF2y==aF2) {
if (!mySplitFaces.HasImage(aF2)) {
mySplitFaces.Bind(aF2, aF2);
}
}
}
else {
if (aF1x==aF2) {
if (!mySplitFaces.HasImage(aF2)) {
mySplitFaces.Bind(aF2, aF2);
}
}
if (aF2y==aF1) {
if (!mySplitFaces.HasImage(aF1)) {
mySplitFaces.Bind(aF1, aF1);
}
}
}
//
break;
}//if (bIsSDF) {
}//for (; aItLI.More(); aItLI.Next()) {
}//for (; aItF1.More(); aItF1.Next()) {
}//for (i=1; i<=aNbFF; ++i)
//-------------------------------------------------------------
aNbC=aLCS.Extent();
if (!aNbC) {
return;
}
//
// 2. Find Chains
NMTTools_IndexedDataMapOfShapeIndexedMapOfShape aMC;
//
NMTTools_Tools::FindChains(aLCS, aMC);
//
Standard_Boolean bIsImage;
Standard_Integer aIx, aIxMin, aNbMSDF, k, aNbMFj;
TopoDS_Shape aFOld, aFSDmin;
TopTools_IndexedMapOfShape aMFj;
TopTools_DataMapOfShapeInteger aDMSI;
//
aItF1.Initialize(myShapes);
for (j=1; aItF1.More(); aItF1.Next(), ++j) {
const TopoDS_Shape& aSj=aItF1.Value();
aMFj.Clear();
TopExp::MapShapes(aSj, TopAbs_FACE, aMFj);
aNbMFj=aMFj.Extent();
for (k=1; k<=aNbMFj; ++k) {
const TopoDS_Shape& aFk=aMFj(k);
if (!aDMSI.IsBound(aFk)) {
aDMSI.Bind(aFk, j);
}
}
}
//
// 3. Fill the map of SDF mySameDomainFaces
aNbC=aMC.Extent();
for (i=1; i<=aNbC; ++i) {
// const TopoDS_Shape& aF=aMC.FindKey(i);
const TopTools_IndexedMapOfShape& aMSDF=aMC(i);
//
aNbMSDF=aMSDF.Extent();
for (j=1; j<=aNbMSDF; ++j) {
const TopoDS_Shape& aFSD=aMSDF(j);
bIsImage=mySplitFaces.IsImage(aFSD);
aFOld=aFSD;
if (bIsImage) {
aFOld=mySplitFaces.ImageFrom(aFSD);
}
//
aIx=aDMSI.Find(aFOld);
if (j==1) {
aIxMin=aIx;
aFSDmin=aFSD;
continue;
}
else {
if (aIx<aIxMin) {
aIxMin=aIx;
aFSDmin=aFSD;
}
}
}
//
for (j=1; j<=aNbMSDF; ++j) {
const TopoDS_Shape& aFSD=aMSDF(j);
mySameDomainShapes.Add(aFSD, aFSDmin);
}
}
//
}
bool NETGENPlugin_NETGEN_3D::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
int nbtri = 0, nbqua = 0;
double fullArea = 0.0;
for (TopExp_Explorer exp(aShape, TopAbs_FACE); exp.More(); exp.Next()) {
TopoDS_Face F = TopoDS::Face( exp.Current() );
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
MapShapeNbElemsItr anIt = aResMap.find(sm);
if( anIt==aResMap.end() ) {
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nbtri += Max(aVec[SMDSEntity_Triangle],aVec[SMDSEntity_Quad_Triangle]);
nbqua += Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
fullArea += anArea;
}
// collect info from edges
int nb0d_e = 0, nb1d_e = 0;
bool IsQuadratic = false;
bool IsFirst = true;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(aShape, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge(exp.Current());
if( tmpMap.Contains(E) )
continue;
tmpMap.Add(E);
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
if( anIt==aResMap.end() ) {
SMESH_ComputeErrorPtr& smError = aSubMesh->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,
"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nb0d_e += aVec[SMDSEntity_Node];
nb1d_e += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
double ELen_face = sqrt(2.* ( fullArea/(nbtri+nbqua*2) ) / sqrt(3.0) );
double ELen_vol = pow( 72, 1/6. ) * pow( _maxElementVolume, 1/3. );
double ELen = Min(ELen_vol,ELen_face*2);
GProp_GProps G;
BRepGProp::VolumeProperties(aShape,G);
double aVolume = G.Mass();
double tetrVol = 0.1179*ELen*ELen*ELen;
double CoeffQuality = 0.9;
int nbVols = (int)aVolume/tetrVol/CoeffQuality;
int nb1d_f = (nbtri*3 + nbqua*4 - nb1d_e) / 2;
int nb1d_in = (int) ( nbVols*6 - nb1d_e - nb1d_f ) / 5;
std::vector<int> aVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
if( IsQuadratic ) {
aVec[SMDSEntity_Node] = nb1d_in/6 + 1 + nb1d_in;
aVec[SMDSEntity_Quad_Tetra] = nbVols - nbqua*2;
aVec[SMDSEntity_Quad_Pyramid] = nbqua;
}
else {
aVec[SMDSEntity_Node] = nb1d_in/6 + 1;
aVec[SMDSEntity_Tetra] = nbVols - nbqua*2;
aVec[SMDSEntity_Pyramid] = nbqua;
}
SMESH_subMesh *sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aVec));
return true;
}
//=======================================================================
//function : Execute
//purpose :
//=======================================================================
Standard_Integer GEOMImpl_ChamferDriver::Execute(TFunction_Logbook& log) const
{
if (Label().IsNull()) return 0;
Handle(GEOM_Function) aFunction = GEOM_Function::GetFunction(Label());
GEOMImpl_IChamfer aCI (aFunction);
Standard_Integer aType = aFunction->GetType();
TopoDS_Shape aShape;
Handle(GEOM_Function) aRefShape = aCI.GetShape();
TopoDS_Shape aShapeBase = aRefShape->GetValue();
// Check the shape type. It have to be shell
// or solid, or compsolid, or compound of these shapes.
if (!isGoodForChamfer(aShapeBase)) {
StdFail_NotDone::Raise
("Wrong shape. Must be shell or solid, or compsolid or compound of these shapes");
}
BRepFilletAPI_MakeChamfer fill (aShapeBase);
if (aType == CHAMFER_SHAPE_ALL) {
// symmetric chamfer on all edges
double aD = aCI.GetD();
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (int i = 1; i <= M.Extent(); i++) {
TopoDS_Edge E = TopoDS::Edge(M.FindKey(i));
TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First());
if (!BRepTools::IsReallyClosed(E, F) &&
!BRep_Tool::Degenerated(E) &&
M.FindFromIndex(i).Extent() == 2)
fill.Add(aD, E, F);
}
}
else if (aType == CHAMFER_SHAPE_EDGE || aType == CHAMFER_SHAPE_EDGE_AD) {
// chamfer on edges, common to two faces, with D1 on the first face
TopoDS_Shape aFace1, aFace2;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace1(), aFace1) &&
GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace2(), aFace2))
{
TopoDS_Face F = TopoDS::Face(aFace1);
// fill map of edges of the second face
TopTools_MapOfShape aMap;
TopExp_Explorer Exp2 (aFace2, TopAbs_EDGE);
for (; Exp2.More(); Exp2.Next()) {
aMap.Add(Exp2.Current());
}
// find edges of the first face, common with the second face
TopExp_Explorer Exp (aFace1, TopAbs_EDGE);
for (; Exp.More(); Exp.Next()) {
if (aMap.Contains(Exp.Current())) {
TopoDS_Edge E = TopoDS::Edge(Exp.Current());
if (!BRepTools::IsReallyClosed(E, F) && !BRep_Tool::Degenerated(E))
{
if ( aType == CHAMFER_SHAPE_EDGE )
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (M_PI/2.)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
}
}
else if (aType == CHAMFER_SHAPE_FACES || aType == CHAMFER_SHAPE_FACES_AD) {
// chamfer on all edges of the selected faces, with D1 on the selected face
// (on first selected face, if the edge belongs to two selected faces)
int aLen = aCI.GetLength();
int ind = 1;
TopTools_MapOfShape aMap;
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (; ind <= aLen; ind++)
{
TopoDS_Shape aShapeFace;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace(ind), aShapeFace))
{
TopoDS_Face F = TopoDS::Face(aShapeFace);
TopExp_Explorer Exp (F, TopAbs_EDGE);
for (; Exp.More(); Exp.Next()) {
if (!aMap.Contains(Exp.Current()))
{
TopoDS_Edge E = TopoDS::Edge(Exp.Current());
if (!BRepTools::IsReallyClosed(E, F) &&
!BRep_Tool::Degenerated(E) &&
M.FindFromKey(E).Extent() == 2)
{
if (aType == CHAMFER_SHAPE_FACES)
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (M_PI/2.)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
}
}
}
else if (aType == CHAMFER_SHAPE_EDGES || aType == CHAMFER_SHAPE_EDGES_AD)
{
// chamfer on selected edges with lenght param D1 & D2.
int aLen = aCI.GetLength();
int ind = 1;
TopTools_MapOfShape aMap;
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (; ind <= aLen; ind++)
{
TopoDS_Shape aShapeEdge;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetEdge(ind), aShapeEdge))
{
TopoDS_Edge E = TopoDS::Edge(aShapeEdge);
const TopTools_ListOfShape& aFacesList = M.FindFromKey(E);
TopoDS_Face F = TopoDS::Face( aFacesList.First() );
if (aType == CHAMFER_SHAPE_EDGES)
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (M_PI/2.)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
else {
}
fill.Build();
if (!fill.IsDone()) {
StdFail_NotDone::Raise("Chamfer can not be computed on the given shape with the given parameters");
}
aShape = fill.Shape();
if (aShape.IsNull()) return 0;
// reduce tolerances
ShapeFix_ShapeTolerance aSFT;
aSFT.LimitTolerance(aShape, Precision::Confusion(),
Precision::Confusion(), TopAbs_SHAPE);
Handle(ShapeFix_Shape) aSfs = new ShapeFix_Shape(aShape);
aSfs->Perform();
aShape = aSfs->Shape();
// fix SameParameter flag
BRepLib::SameParameter(aShape, 1.E-5, Standard_True);
aFunction->SetValue(aShape);
log.SetTouched(Label());
return 1;
}
//=======================================================================
//function : FillIn3DParts
//purpose :
//=======================================================================
void GEOMAlgo_Builder::FillIn3DParts()
{
myErrorStatus=0;
//
const NMTDS_ShapesDataStructure& aDS=*myPaveFiller->DS();
NMTTools_PaveFiller* pPF=myPaveFiller;
const Handle(IntTools_Context)& aCtx= pPF->Context();
//
Standard_Boolean bIsIN, bHasImage;
Standard_Integer aNbS, aNbSolids, i, j, aNbFaces, aNbFP, aNbFPx, aNbFIN, aNbLIF;
TopAbs_ShapeEnum aType;
TopAbs_State aState;
TopTools_IndexedMapOfShape aMSolids, aMS, aMFaces, aMFIN;
TopTools_MapOfShape aMFDone;
TopTools_IndexedDataMapOfShapeListOfShape aMEF;
TopTools_ListIteratorOfListOfShape aItS;
TopoDS_Iterator aIt, aItF;
BRep_Builder aBB;
TopoDS_Solid aSolidSp;
TopoDS_Face aFP;
//
myDraftSolids.Clear();
//
aNbS=aDS.NumberOfShapesOfTheObject();
for (i=1; i<=aNbS; ++i) {
const TopoDS_Shape& aS=aDS.Shape(i);
//
aType=aS.ShapeType();
if (aType==TopAbs_SOLID) {
// all solids from DS
aMSolids.Add(aS);
}
else if (aType==TopAbs_FACE) {
// all faces (originals from DS or theirs images)
if (myImages.HasImage(aS)) {
const TopTools_ListOfShape& aLS=myImages.Image(aS);
aItS.Initialize(aLS);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aFx=aItS.Value();
//
if (mySameDomainShapes.Contains(aFx)) {
const TopoDS_Shape& aFSDx=mySameDomainShapes.FindFromKey(aFx);
aMFaces.Add(aFSDx);
}
else {
aMFaces.Add(aFx);
}
}
}
else {
if (mySameDomainShapes.Contains(aS)) {
const TopoDS_Shape& aFSDx=mySameDomainShapes.FindFromKey(aS);
aMFaces.Add(aFSDx);
}
else {
aMFaces.Add(aS);
}
}
}
}
//
aNbFaces=aMFaces.Extent();
aNbSolids=aMSolids.Extent();
//
for (i=1; i<=aNbSolids; ++i) {
const TopoDS_Solid& aSolid=TopoDS::Solid(aMSolids(i));
aMFDone.Clear();
aMFIN.Clear();
aMEF.Clear();
//
aBB.MakeSolid(aSolidSp);
//
TopTools_ListOfShape aLIF;
//
BuildDraftSolid(aSolid, aSolidSp, aLIF);
aNbLIF=aLIF.Extent();
//
// 1 all faces/edges from aSolid [ aMS ]
bHasImage=Standard_False;
aMS.Clear();
aIt.Initialize(aSolid);
for (; aIt.More(); aIt.Next()) {
const TopoDS_Shape& aShell=aIt.Value();
//
if (myImages.HasImage(aShell)) {
bHasImage=Standard_True;
//
const TopTools_ListOfShape& aLS=myImages.Image(aShell);
aItS.Initialize(aLS);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aSx=aItS.Value();
aMS.Add(aSx);
TopExp::MapShapes(aSx, TopAbs_FACE, aMS);
TopExp::MapShapes(aSx, TopAbs_EDGE, aMS);
TopExp::MapShapesAndAncestors(aSx, TopAbs_EDGE, TopAbs_FACE, aMEF);
}
}
else {
//aMS.Add(aShell);
TopExp::MapShapes(aShell, TopAbs_FACE, aMS);
//modified by NIZNHY-PKV Fri Dec 03 11:18:45 2010f
TopExp::MapShapes(aShell, TopAbs_EDGE, aMS);
//modified by NIZNHY-PKV Fri Dec 03 11:18:51 2010t
TopExp::MapShapesAndAncestors(aShell, TopAbs_EDGE, TopAbs_FACE, aMEF);
}
}
//
// 2 all faces that are not from aSolid [ aLFP1 ]
Standard_Integer aNbEFP;
TopTools_IndexedDataMapOfShapeListOfShape aMEFP;
TopTools_ListIteratorOfListOfShape aItFP, aItEx;
TopTools_MapOfShape aMFence;
TopTools_ListOfShape aLFP1, aLFP2, aLFP, aLCBF, aLFIN, aLEx;//*pLFP,
//
// for all non-solid faces build EF map [ aMEFP ]
for (j=1; j<=aNbFaces; ++j) {
const TopoDS_Shape& aFace=aMFaces(j);
if (!aMS.Contains(aFace)) {
TopExp::MapShapesAndAncestors(aFace, TopAbs_EDGE, TopAbs_FACE, aMEFP);
}
}
//
// among all faces from aMEFP select these that have same edges
// with the solid (i.e aMEF). These faces will be treated first
// to prevent the usage of 3D classifier.
// The full list of faces to process is aLFP1.
aNbEFP=aMEFP.Extent();
for (j=1; j<=aNbEFP; ++j) {
const TopoDS_Shape& aE=aMEFP.FindKey(j);
//
if (aMEF.Contains(aE)) { // !!
const TopTools_ListOfShape& aLF=aMEFP(j);
aItFP.Initialize(aLF);
for (; aItFP.More(); aItFP.Next()) {
const TopoDS_Shape& aF=aItFP.Value();
if (aMFence.Add(aF)) {
aLFP1.Append(aF);
}
}
}
else {
aLEx.Append(aE);
}
}
//
aItEx.Initialize(aLEx);
for (; aItEx.More(); aItEx.Next()) {
const TopoDS_Shape& aE=aItEx.Value();
const TopTools_ListOfShape& aLF=aMEFP.FindFromKey(aE);
aItFP.Initialize(aLF);
for (; aItFP.More(); aItFP.Next()) {
const TopoDS_Shape& aF=aItFP.Value();
if (aMFence.Add(aF)) {
aLFP2.Append(aF);
}
}
}
aLFP1.Append(aLFP2);
//==========
//
// 3 Process faces aLFP1
aNbFP=aLFP1.Extent();
aItFP.Initialize(aLFP1);
for (; aItFP.More(); aItFP.Next()) {
const TopoDS_Shape& aSP=aItFP.Value();
if (!aMFDone.Add(aSP)) {
continue;
}
//
// first face to process
aFP=TopoDS::Face(aSP);
bIsIN= GEOMAlgo_Tools3D::IsInternalFace(aFP, aSolidSp, aMEF, 1.e-14, aCtx);
aState=(bIsIN) ? TopAbs_IN : TopAbs_OUT;
//
// collect faces to process [ aFP is the first ]
aLFP.Clear();
aLFP.Append(aFP);
aItS.Initialize(aLFP1);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aSk=aItS.Value();
if (!aMFDone.Contains(aSk)) {
aLFP.Append(aSk);
}
}
//
// Connexity Block that spreads from aFP the Bound
// or till the end of the block itself
aLCBF.Clear();
GEOMAlgo_Tools3D::MakeConnexityBlock(aLFP, aMS, aLCBF);
//
// fill states for the Connexity Block
aItS.Initialize(aLCBF);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aSx=aItS.Value();
aMFDone.Add(aSx);
if (aState==TopAbs_IN) {
aMFIN.Add(aSx);
}
}
//
aNbFPx=aMFDone.Extent();
if (aNbFPx==aNbFP) {
break;
}
}//for (; aItFP.More(); aItFP.Next())
//
// faces Inside aSolid
aLFIN.Clear();
aNbFIN=aMFIN.Extent();
if (aNbFIN || aNbLIF) {
for (j=1; j<=aNbFIN; ++j) {
const TopoDS_Shape& aFIN=aMFIN(j);
aLFIN.Append(aFIN);
}
//
aItS.Initialize(aLIF);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aFIN=aItS.Value();
aLFIN.Append(aFIN);
}
//
myInParts.Add(aSolid, aLFIN);
}
if (aNbFIN || bHasImage) {
myDraftSolids.Add(aSolid, aSolidSp);
}
}//for (i=1; i<=aNbSolids; ++i) { // next solid
}
bool StdMeshers_RadialPrism_3D::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
// get 2 shells
TopoDS_Solid solid = TopoDS::Solid( aShape );
TopoDS_Shell outerShell = BRepClass3d::OuterShell( solid );
TopoDS_Shape innerShell;
int nbShells = 0;
for ( TopoDS_Iterator It (solid); It.More(); It.Next(), ++nbShells )
if ( !outerShell.IsSame( It.Value() ))
innerShell = It.Value();
if ( nbShells != 2 ) {
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
// Associate sub-shapes of the shells
ProjectionUtils::TShapeShapeMap shape2ShapeMap;
if ( !ProjectionUtils::FindSubShapeAssociation( outerShell, &aMesh,
innerShell, &aMesh,
shape2ShapeMap) ) {
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
// get info for outer shell
int nb0d_Out=0, nb2d_3_Out=0, nb2d_4_Out=0;
//TopTools_SequenceOfShape FacesOut;
for (TopExp_Explorer exp(outerShell, TopAbs_FACE); exp.More(); exp.Next()) {
//FacesOut.Append(exp.Current());
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
std::vector<int> aVec = (*anIt).second;
nb0d_Out += aVec[SMDSEntity_Node];
nb2d_3_Out += Max(aVec[SMDSEntity_Triangle],aVec[SMDSEntity_Quad_Triangle]);
nb2d_4_Out += Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
}
int nb1d_Out = 0;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(outerShell, TopAbs_EDGE); exp.More(); exp.Next()) {
if( tmpMap.Contains( exp.Current() ) )
continue;
tmpMap.Add( exp.Current() );
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
std::vector<int> aVec = (*anIt).second;
nb0d_Out += aVec[SMDSEntity_Node];
nb1d_Out += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
}
tmpMap.Clear();
for (TopExp_Explorer exp(outerShell, TopAbs_VERTEX); exp.More(); exp.Next()) {
if( tmpMap.Contains( exp.Current() ) )
continue;
tmpMap.Add( exp.Current() );
nb0d_Out++;
}
// get info for inner shell
int nb0d_In=0, nb2d_3_In=0, nb2d_4_In=0;
//TopTools_SequenceOfShape FacesIn;
for (TopExp_Explorer exp(innerShell, TopAbs_FACE); exp.More(); exp.Next()) {
//FacesIn.Append(exp.Current());
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
std::vector<int> aVec = (*anIt).second;
nb0d_In += aVec[SMDSEntity_Node];
nb2d_3_In += Max(aVec[SMDSEntity_Triangle],aVec[SMDSEntity_Quad_Triangle]);
nb2d_4_In += Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
}
int nb1d_In = 0;
tmpMap.Clear();
bool IsQuadratic = false;
bool IsFirst = true;
for (TopExp_Explorer exp(innerShell, TopAbs_EDGE); exp.More(); exp.Next()) {
if( tmpMap.Contains( exp.Current() ) )
continue;
tmpMap.Add( exp.Current() );
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
std::vector<int> aVec = (*anIt).second;
nb0d_In += aVec[SMDSEntity_Node];
nb1d_In += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
for (TopExp_Explorer exp(innerShell, TopAbs_VERTEX); exp.More(); exp.Next()) {
if( tmpMap.Contains( exp.Current() ) )
continue;
tmpMap.Add( exp.Current() );
nb0d_In++;
}
bool IsOK = (nb0d_Out==nb0d_In) && (nb1d_Out==nb1d_In) &&
(nb2d_3_Out==nb2d_3_In) && (nb2d_4_Out==nb2d_4_In);
if(!IsOK) {
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
int nbLayers = 0;
if( myNbLayerHypo ) {
nbLayers = myNbLayerHypo->GetNumberOfLayers();
}
if ( myDistributionHypo ) {
if ( !myDistributionHypo->GetLayerDistribution() ) {
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
TopExp_Explorer exp(outerShell, TopAbs_VERTEX);
TopoDS_Vertex Vout = TopoDS::Vertex(exp.Current());
TopoDS_Vertex Vin = TopoDS::Vertex( shape2ShapeMap(Vout) );
if ( myLayerPositions.empty() ) {
gp_Pnt pIn = BRep_Tool::Pnt(Vin);
gp_Pnt pOut = BRep_Tool::Pnt(Vout);
computeLayerPositions( pIn, pOut );
}
nbLayers = myLayerPositions.size() + 1;
}
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
if(IsQuadratic) {
aResVec[SMDSEntity_Quad_Penta] = nb2d_3_Out * nbLayers;
aResVec[SMDSEntity_Quad_Hexa] = nb2d_4_Out * nbLayers;
int nb1d = ( nb2d_3_Out*3 + nb2d_4_Out*4 ) / 2;
aResVec[SMDSEntity_Node] = nb0d_Out * ( 2*nbLayers - 1 ) - nb1d * nbLayers;
}
else {
aResVec[SMDSEntity_Node] = nb0d_Out * ( nbLayers - 1 );
aResVec[SMDSEntity_Penta] = nb2d_3_Out * nbLayers;
aResVec[SMDSEntity_Hexa] = nb2d_4_Out * nbLayers;
}
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
return true;
}
bool NETGENPlugin_NETGEN_2D_ONLY::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
TopoDS_Face F = TopoDS::Face(aShape);
if(F.IsNull())
return false;
// collect info from edges
int nb0d = 0, nb1d = 0;
bool IsQuadratic = false;
bool IsFirst = true;
double fullLen = 0.0;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(F, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge(exp.Current());
if( tmpMap.Contains(E) )
continue;
tmpMap.Add(E);
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
if( anIt==aResMap.end() ) {
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nb0d += aVec[SMDSEntity_Node];
nb1d += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
double aLen = SMESH_Algo::EdgeLength(E);
fullLen += aLen;
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
// compute edge length
double ELen = 0;
if (_hypLengthFromEdges || (!_hypLengthFromEdges && !_hypMaxElementArea)) {
if ( nb1d > 0 )
ELen = fullLen / nb1d;
}
if ( _hypMaxElementArea ) {
double maxArea = _hypMaxElementArea->GetMaxArea();
ELen = sqrt(2. * maxArea/sqrt(3.0));
}
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
const int hugeNb = numeric_limits<int>::max()/10;
if ( anArea / hugeNb > ELen*ELen )
{
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated.\nToo small element length",this));
return false;
}
int nbFaces = (int) ( anArea / ( ELen*ELen*sqrt(3.) / 4 ) );
int nbNodes = (int) ( ( nbFaces*3 - (nb1d-1)*2 ) / 6 + 1 );
std::vector<int> aVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
if( IsQuadratic ) {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Quad_Triangle] = nbFaces;
}
else {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Triangle] = nbFaces;
}
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
aResMap.insert(std::make_pair(sm,aVec));
return true;
}
//=======================================================================
//function : FindFacePairs
//purpose :
//=======================================================================
Standard_Boolean FindFacePairs (const TopoDS_Edge& theE,
const TopTools_ListOfShape& thLF,
NMTTools_ListOfCoupleOfShape& theLCFF)
{
Standard_Boolean bFound;
Standard_Integer i, aNbCEF;
TopAbs_Orientation aOr, aOrC;
TopTools_MapOfShape aMFP;
TopoDS_Face aF1, aF2;
TopoDS_Edge aEL, aE1;
TopTools_ListIteratorOfListOfShape aItLF;
NMTTools_CoupleOfShape aCEF, aCFF;
NMTTools_ListOfCoupleOfShape aLCEF, aLCEFx;
NMTTools_ListIteratorOfListOfCoupleOfShape aIt;
//
bFound=Standard_True;
//
// Preface aLCEF
aItLF.Initialize(thLF);
for (; aItLF.More(); aItLF.Next()) {
const TopoDS_Face& aFL=TopoDS::Face(aItLF.Value());
//
bFound=GEOMAlgo_Tools3D::GetEdgeOnFace(theE, aFL, aEL);
if (!bFound) {
return bFound; // it can not be so
}
//
aCEF.SetShape1(aEL);
aCEF.SetShape2(aFL);
aLCEF.Append(aCEF);
}
//
aNbCEF=aLCEF.Extent();
while(aNbCEF) {
//
// aLCEFx
aLCEFx.Clear();
aIt.Initialize(aLCEF);
for (i=0; aIt.More(); aIt.Next(), ++i) {
const NMTTools_CoupleOfShape& aCSx=aIt.Value();
const TopoDS_Shape& aEx=aCSx.Shape1();
const TopoDS_Shape& aFx=aCSx.Shape2();
//
aOr=aEx.Orientation();
//
if (!i) {
aOrC=TopAbs::Reverse(aOr);
aE1=TopoDS::Edge(aEx);
aF1=TopoDS::Face(aFx);
aMFP.Add(aFx);
continue;
}
//
if (aOr==aOrC) {
aLCEFx.Append(aCSx);
aMFP.Add(aFx);
}
}
//
// F2
GEOMAlgo_Tools3D::GetFaceOff(aE1, aF1, aLCEFx, aF2);
//
aCFF.SetShape1(aF1);
aCFF.SetShape2(aF2);
theLCFF.Append(aCFF);
//
aMFP.Add(aF1);
aMFP.Add(aF2);
//
// refine aLCEF
aLCEFx.Clear();
aLCEFx=aLCEF;
aLCEF.Clear();
aIt.Initialize(aLCEFx);
for (; aIt.More(); aIt.Next()) {
const NMTTools_CoupleOfShape& aCSx=aIt.Value();
const TopoDS_Shape& aFx=aCSx.Shape2();
if (!aMFP.Contains(aFx)) {
aLCEF.Append(aCSx);
}
}
//
aNbCEF=aLCEF.Extent();
}//while(aNbCEF) {
//
return bFound;
}
//=======================================================================
//function : DetectVertices
//purpose :
//=======================================================================
void GEOMAlgo_GlueDetector::DetectVertices()
{
Standard_Integer j, i, aNbV, aNbVSD;
Standard_Real aTolV;
gp_Pnt aPV;
TColStd_ListIteratorOfListOfInteger aIt;
TopoDS_Shape aVF;
TopTools_IndexedMapOfShape aMV;
TopTools_MapOfShape aMVProcessed;
TopTools_ListIteratorOfListOfShape aItS;
TopTools_DataMapIteratorOfDataMapOfShapeListOfShape aItIm;
TopTools_DataMapOfShapeListOfShape aMVV;
GEOMAlgo_IndexedDataMapOfIntegerShape aMIS;
NMTDS_IndexedDataMapOfShapeBndSphere aMSB;
//
NMTDS_BndSphereTreeSelector aSelector;
NMTDS_BndSphereTree aBBTree;
NCollection_UBTreeFiller <Standard_Integer, NMTDS_BndSphere> aTreeFiller(aBBTree);
//
myErrorStatus=0;
//
TopExp::MapShapes(myArgument, TopAbs_VERTEX, aMV);
aNbV=aMV.Extent();
if (!aNbV) {
myErrorStatus=2; // no vertices in source shape
return;
}
//
for (i=1; i<=aNbV; ++i) {
NMTDS_BndSphere aBox;
//
const TopoDS_Vertex& aV=*((TopoDS_Vertex*)&aMV(i));
aPV=BRep_Tool::Pnt(aV);
aTolV=BRep_Tool::Tolerance(aV);
//
aBox.SetGap(myTolerance);
aBox.SetCenter(aPV);
aBox.SetRadius(aTolV);
//
aTreeFiller.Add(i, aBox);
//
aMIS.Add(i, aV);
aMSB.Add(aV, aBox);
}
//
aTreeFiller.Fill();
//
//---------------------------------------------------
// Chains
for (i=1; i<=aNbV; ++i) {
const TopoDS_Shape& aV=aMV(i);
//
if (aMVProcessed.Contains(aV)) {
continue;
}
//
Standard_Integer aNbIP, aIP, aNbIP1, aIP1;
TopTools_ListOfShape aLVSD;
TColStd_MapOfInteger aMIP, aMIP1, aMIPC;
TColStd_MapIteratorOfMapOfInteger aIt1;
//
aMIP.Add(i);
while(1) {
aNbIP=aMIP.Extent();
aIt1.Initialize(aMIP);
for(; aIt1.More(); aIt1.Next()) {
aIP=aIt1.Key();
if (aMIPC.Contains(aIP)) {
continue;
}
//
const TopoDS_Shape& aVP=aMIS.FindFromKey(aIP);
const NMTDS_BndSphere& aBoxVP=aMSB.FindFromKey(aVP);
//
aSelector.Clear();
aSelector.SetBox(aBoxVP);
//
aNbVSD=aBBTree.Select(aSelector);
if (!aNbVSD) {
continue; // it shoild not be so [at least IP itself]
}
//
const TColStd_ListOfInteger& aLI=aSelector.Indices();
aIt.Initialize(aLI);
for (; aIt.More(); aIt.Next()) {
aIP1=aIt.Value();
if (aMIP.Contains(aIP1)) {
continue;
}
aMIP1.Add(aIP1);
} //for (; aIt.More(); aIt.Next()) {
}//for(; aIt1.More(); aIt1.Next()) {
//
aNbIP1=aMIP1.Extent();
if (!aNbIP1) {
break;
}
//
aIt1.Initialize(aMIP);
for(; aIt1.More(); aIt1.Next()) {
aIP=aIt1.Key();
aMIPC.Add(aIP);
}
//
aMIP.Clear();
aIt1.Initialize(aMIP1);
for(; aIt1.More(); aIt1.Next()) {
aIP=aIt1.Key();
aMIP.Add(aIP);
}
aMIP1.Clear();
}// while(1)
//
// Fill myImages
aNbIP=aMIPC.Extent();
//
if (!aNbIP) {// no SD vertices is found
aMVProcessed.Add(aV);
continue;
}
//else { // SD vertices founded [ aMIPC ]
aIt1.Initialize(aMIPC);
for(j=0; aIt1.More(); aIt1.Next(), ++j) {
aIP=aIt1.Key();
const TopoDS_Shape& aVP=aMIS.FindFromKey(aIP);
if (!j) {
aVF=aVP;
}
aLVSD.Append(aVP);
aMVProcessed.Add(aVP);
}
//}
myImages.Bind(aVF, aLVSD);
}// for (i=1; i<=aNbV; ++i) {
//------------------------------
// Origins
aItIm.Initialize(myImages);
for (; aItIm.More(); aItIm.Next()) {
const TopoDS_Shape& aV=aItIm.Key();
const TopTools_ListOfShape& aLVSD=aItIm.Value();
aItS.Initialize(aLVSD);
for (; aItS.More(); aItS.Next()) {
const TopoDS_Shape& aVSD=aItS.Value();
if (!myOrigins.IsBound(aVSD)) {
myOrigins.Bind(aVSD, aV);
}
}
}
}
//=======================================================================
//function : Execute
//purpose :
//=======================================================================
Standard_Integer GEOMImpl_ChamferDriver::Execute(TFunction_Logbook& log) const
{
if (Label().IsNull()) return 0;
Handle(GEOM_Function) aFunction = GEOM_Function::GetFunction(Label());
GEOMImpl_IChamfer aCI (aFunction);
Standard_Integer aType = aFunction->GetType();
TopoDS_Shape aShape;
Handle(GEOM_Function) aRefShape = aCI.GetShape();
TopoDS_Shape aShapeBase = aRefShape->GetValue();
if (aType == CHAMFER_SHAPE_EDGES_2D)
{
BRepFilletAPI_MakeFillet2d fill;
TopoDS_Face aFace;
Standard_Boolean aWireFlag = Standard_False;
if (aShapeBase.ShapeType() == TopAbs_FACE)
aFace = TopoDS::Face(aShapeBase);
else if (aShapeBase.ShapeType() == TopAbs_WIRE)
{
TopoDS_Wire aWire = TopoDS::Wire(aShapeBase);
BRepBuilderAPI_MakeFace aMF(aWire);
aMF.Build();
if (!aMF.IsDone()) {
StdFail_NotDone::Raise("Cannot build initial face from given wire");
}
aFace = aMF.Face();
aWireFlag = Standard_True;
}
else
StdFail_NotDone::Raise("Base shape is neither a face or a wire !");
fill.Init(aFace);
double aD1_2D = aCI.GetD1();
double aD2_2D = aCI.GetD2();
TopoDS_Shape aShapeFace1, aShapeFace2;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.Get2DEdge1(), aShapeFace1) &&
GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.Get2DEdge2(), aShapeFace2))
{
fill.AddChamfer(TopoDS::Edge(aShapeFace1), TopoDS::Edge(aShapeFace2), aD1_2D, aD2_2D);
}
else
StdFail_NotDone::Raise("Cannot get 2d egde from sub-shape index!");
fill.Build();
if (!fill.IsDone()) {
StdFail_NotDone::Raise("Chamfer can not be computed on the given shape with the given parameters");
}
if (aWireFlag)
{
BRepBuilderAPI_MakeWire MW;
TopExp_Explorer exp (fill.Shape(), TopAbs_EDGE);
for (; exp.More(); exp.Next())
MW.Add(TopoDS::Edge(exp.Current()));
MW.Build();
if (!MW.IsDone())
StdFail_NotDone::Raise("Resulting wire cannot be built");
aShape = MW.Shape();
}
else
aShape = fill.Shape();
}
else
{
// Check the shape type. It have to be shell
// or solid, or compsolid, or compound of these shapes.
if (!isGoodForChamfer(aShapeBase)) {
StdFail_NotDone::Raise
("Wrong shape. Must be shell or solid, or compsolid or compound of these shapes");
}
BRepFilletAPI_MakeChamfer fill (aShapeBase);
if (aType == CHAMFER_SHAPE_ALL) {
// symmetric chamfer on all edges
double aD = aCI.GetD();
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (int i = 1; i <= M.Extent(); i++) {
TopoDS_Edge E = TopoDS::Edge(M.FindKey(i));
TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First());
if (!BRepTools::IsReallyClosed(E, F) &&
!BRep_Tool::Degenerated(E) &&
M.FindFromIndex(i).Extent() == 2)
fill.Add(aD, E, F);
}
}else if (aType == CHAMFER_SHAPE_EDGE || aType == CHAMFER_SHAPE_EDGE_AD) {
// chamfer on edges, common to two faces, with D1 on the first face
TopoDS_Shape aFace1, aFace2;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace1(), aFace1) &&
GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace2(), aFace2))
{
TopoDS_Face F = TopoDS::Face(aFace1);
// fill map of edges of the second face
TopTools_MapOfShape aMap;
TopExp_Explorer Exp2 (aFace2, TopAbs_EDGE);
for (; Exp2.More(); Exp2.Next()) {
aMap.Add(Exp2.Current());
}
// find edges of the first face, common with the second face
TopExp_Explorer Exp (aFace1, TopAbs_EDGE);
for (; Exp.More(); Exp.Next()) {
if (aMap.Contains(Exp.Current())) {
TopoDS_Edge E = TopoDS::Edge(Exp.Current());
if (!BRepTools::IsReallyClosed(E, F) && !BRep_Tool::Degenerated(E))
{
if ( aType == CHAMFER_SHAPE_EDGE )
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (Standard_PI/2)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
}
}
else if (aType == CHAMFER_SHAPE_FACES || aType == CHAMFER_SHAPE_FACES_AD) {
// chamfer on all edges of the selected faces, with D1 on the selected face
// (on first selected face, if the edge belongs to two selected faces)
int aLen = aCI.GetLength();
int ind = 1;
TopTools_MapOfShape aMap;
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (; ind <= aLen; ind++)
{
TopoDS_Shape aShapeFace;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetFace(ind), aShapeFace))
{
TopoDS_Face F = TopoDS::Face(aShapeFace);
TopExp_Explorer Exp (F, TopAbs_EDGE);
for (; Exp.More(); Exp.Next()) {
if (!aMap.Contains(Exp.Current()))
{
TopoDS_Edge E = TopoDS::Edge(Exp.Current());
if (!BRepTools::IsReallyClosed(E, F) &&
!BRep_Tool::Degenerated(E) &&
M.FindFromKey(E).Extent() == 2)
if (aType == CHAMFER_SHAPE_FACES)
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (Standard_PI/2)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
}
}
else if (aType == CHAMFER_SHAPE_EDGES || aType == CHAMFER_SHAPE_EDGES_AD)
{
// chamfer on selected edges with lenght param D1 & D2.
int aLen = aCI.GetLength();
int ind = 1;
TopTools_MapOfShape aMap;
TopTools_IndexedDataMapOfShapeListOfShape M;
GEOMImpl_Block6Explorer::MapShapesAndAncestors(aShapeBase, TopAbs_EDGE, TopAbs_FACE, M);
for (; ind <= aLen; ind++)
{
TopoDS_Shape aShapeEdge;
if (GEOMImpl_ILocalOperations::GetSubShape(aShapeBase, aCI.GetEdge(ind), aShapeEdge))
{
TopoDS_Edge E = TopoDS::Edge(aShapeEdge);
const TopTools_ListOfShape& aFacesList = M.FindFromKey(E);
TopoDS_Face F = TopoDS::Face( aFacesList.First() );
if (aType == CHAMFER_SHAPE_EDGES)
{
double aD1 = aCI.GetD1();
double aD2 = aCI.GetD2();
fill.Add(aD1, aD2, E, F);
}
else
{
double aD = aCI.GetD();
double anAngle = aCI.GetAngle();
if ( (anAngle > 0) && (anAngle < (Standard_PI/2)) )
fill.AddDA(aD, anAngle, E, F);
}
}
}
}
else {
}
fill.Build();
if (!fill.IsDone()) {
StdFail_NotDone::Raise("Chamfer can not be computed on the given shape with the given parameters");
}
aShape = fill.Shape();
}
if (aShape.IsNull()) return 0;
// Check shape validity
BRepCheck_Analyzer ana (aShape, false);
if (!ana.IsValid()) {
// 08.07.2008 added by skl during fixing bug 19761 from Mantis
ShapeFix_ShapeTolerance aSFT;
aSFT.LimitTolerance(aShape, Precision::Confusion(),
Precision::Confusion(), TopAbs_SHAPE);
Handle(ShapeFix_Shape) aSfs = new ShapeFix_Shape(aShape);
aSfs->Perform();
aShape = aSfs->Shape();
// fix SameParameter flag
BRepLib::SameParameter(aShape, 1.E-5, Standard_True);
ana.Init(aShape);
if (!ana.IsValid()) {
Standard_CString anErrStr("Chamfer algorithm has produced an invalid shape result");
#ifdef THROW_ON_INVALID_SH
Standard_ConstructionError::Raise(anErrStr);
#else
MESSAGE(anErrStr);
//further processing can be performed here
//...
//in case of failure of automatic treatment
//mark the corresponding GEOM_Object as problematic
TDF_Label aLabel = aFunction->GetOwnerEntry();
if (!aLabel.IsRoot()) {
Handle(GEOM_Object) aMainObj = GEOM_Object::GetObject(aLabel);
if (!aMainObj.IsNull())
aMainObj->SetDirty(Standard_True);
}
#endif
}
}
aFunction->SetValue(aShape);
log.SetTouched(Label());
return 1;
}