//----------------------------------------------------------------------------//
Texture* OgreImageCodec::load(const RawDataContainer& data, Texture* result)
{
using namespace Ogre;
// wrap the buffer of the RawDataContainer with an Ogre::MemoryDataStream.
DataStreamPtr stream(
new MemoryDataStream(
const_cast<void*>(static_cast<const void*>(data.getDataPtr())),
data.getSize(), false));
// load the image
Ogre::Image image;
image.load(stream);
// discover the pixel format and number of pixel components
Texture::PixelFormat format;
int components;
switch (image.getFormat())
{
case PF_R8G8B8:
format = Texture::PF_RGB;
components = 3;
break;
case PF_A8R8G8B8:
format = Texture::PF_RGBA;
components = 4;
break;
default:
throw FileIOException("OgreImageCodec::load: File data was of an "
"unsupported format.");
break;
}
// do the old switcharoo on R and B...
// (we could 'fix' this in the CEGUI::OgreTexture, but that would break all
// the other ImageCodecs when used with the Ogre renderer, hence we don't)
uchar* dat = image.getData();
for (uint j = 0; j < image.getHeight(); ++j)
{
for (uint i = 0; i < image.getWidth(); ++i)
{
uchar tmp = dat[i * components + 0];
dat[i * components + 0] = dat[i * components + 2];
dat[i * components + 2] = tmp;
}
dat += image.getRowSpan();
}
// load the resulting image into the texture
result->loadFromMemory(image.getData(),
Size(image.getWidth(),
image.getHeight()),
format);
return result;
}
//-----------------------------------------------------------------------
void AtlasImageTool::correctAlpha (Ogre::Image& image, Ogre::Real alphaCorrection)
{
size_t numPixels = image.getWidth() * image.getHeight();
size_t pointer = 0;
for (size_t i = 0; i < numPixels; ++i)
{
Ogre::ColourValue colour;
Ogre::PixelUtil::unpackColour(&colour, image.getFormat(), (image.getData() + pointer));
colour.a *= alphaCorrection;
Ogre::PixelUtil::packColour(colour, image.getFormat(), (image.getData() + pointer));
pointer += Ogre::PixelUtil::getNumElemBytes(image.getFormat());
}
}
//-----------------------------------------------------------------------
void AtlasImageTool::interpolate (Ogre::Image& interpolatedImage,
Ogre::Image& firstImage,
Ogre::Image& nextImage,
Ogre::Real fraction)
{
size_t numPixels = interpolatedImage.getWidth() * interpolatedImage.getHeight();
size_t pointer = 0;
for (size_t i = 0; i < numPixels; ++i)
{
Ogre::ColourValue firstColour;
Ogre::ColourValue nextColour;
Ogre::ColourValue interpolatedColour;
Ogre::PixelUtil::unpackColour(&firstColour, firstImage.getFormat(), (firstImage.getData() + pointer));
Ogre::PixelUtil::unpackColour(&nextColour, nextImage.getFormat(), (nextImage.getData() + pointer));
interpolatedColour = firstColour + fraction * (nextColour - firstColour);
Ogre::PixelUtil::packColour(interpolatedColour, interpolatedImage.getFormat(), (interpolatedImage.getData() + pointer));
pointer += Ogre::PixelUtil::getNumElemBytes(interpolatedImage.getFormat());
}
}
bool MiniMapMaker::outputTextures(void)
{
// 如果需要（纹理大小改变了或第一次输出文件时），就重建render texture
if (mNeedRecreate)
{
destroy();
init();
}
mTempOutputFileNames.clear();
static const String TEMP_GROUP_NAME = "#TEMP#";
// 创建临时的资源组
Ogre::ResourceGroupManager& rgm = Ogre::ResourceGroupManager::getSingleton();
rgm.addResourceLocation(mPath, "FileSystem", TEMP_GROUP_NAME, false);
// 合并所有物体的包围盒
Ogre::AxisAlignedBox aabb;
Ogre::SceneManager::MovableObjectIterator itm =
mManipulator->getSceneManager()->getMovableObjectIterator(Ogre::EntityFactory::FACTORY_TYPE_NAME);
while (itm.hasMoreElements())
{
Ogre::MovableObject* movable = itm.getNext();
aabb.merge(movable->getWorldBoundingBox(true));
}
mCamera->setFarClipDistance(mCamera->getNearClipDistance() + 2 * (aabb.getMaximum().y - aabb.getMinimum().y ));
mCamera->setNearClipDistance(mTileSize/2);
// 设置摄像机的高度
Real yPos = mCamera->getNearClipDistance() + aabb.getMaximum().y;
TerrainData* terrainData = mManipulator->getTerrainData();
assert (terrainData);
float terrainHeight = terrainData->mMaxZ - terrainData->mMinZ;
float terrainWidth = terrainData->mMaxX - terrainData->mMinX;
// 投影的真正面积
Real projectSize = 0.0f;
// 最终切割成小块纹理的块数
int xIndex = 0;
int zIndex = 0;
Ogre::Vector3 originPoint(Ogre::Vector3::ZERO);
if (mUseRealCameraAngle)
{
float outerSquareWidth = 0.0f;
float outerSquareHeight = 0.0f;
Ogre::Radian alphaAngle = Ogre::Math::ATan( Ogre::Math::Abs(mMoveZDir.z / mMoveZDir.x) );
switch (mCameraDirQuadrant)
{
case WestNorth :
{
float leftWidth = Ogre::Math::Sin(alphaAngle) * terrainHeight;
float rightWidth = Ogre::Math::Cos(alphaAngle) * terrainWidth;
outerSquareWidth = leftWidth + rightWidth;
float topHeight = Ogre::Math::Cos(alphaAngle) * terrainHeight;
float bottomHeight = Ogre::Math::Sin(alphaAngle) * terrainWidth;
outerSquareHeight = topHeight + bottomHeight;
originPoint = Ogre::Vector3(terrainData->mMinX,0,terrainData->mMinZ) +
(-mMoveZDir * leftWidth);
float projectOffset = yPos / Ogre::Math::Tan(mCamDirAngle);
originPoint.x += (mInvertCameraDir * projectOffset ).x;
originPoint.z += (mInvertCameraDir * projectOffset ).z;
break;
}
case EastNorth :
{
float leftWidth = Ogre::Math::Cos(alphaAngle) * terrainWidth;
float rightWidth = Ogre::Math::Sin(alphaAngle) * terrainHeight;
outerSquareWidth = leftWidth + rightWidth;
float topHeight = Ogre::Math::Cos(alphaAngle) * terrainHeight;
float bottomHeight = Ogre::Math::Sin(alphaAngle) * terrainWidth;
outerSquareHeight = topHeight + bottomHeight;
originPoint = Ogre::Vector3(terrainData->mMaxX,0,terrainData->mMinZ) +
(-mMoveZDir * leftWidth);
float projectOffset = yPos / Ogre::Math::Tan(mCamDirAngle);
originPoint.x += (mInvertCameraDir * projectOffset ).x;
originPoint.z += (mInvertCameraDir * projectOffset ).z;
break;
}
case EastSouth :
{
float leftWidth = Ogre::Math::Sin(alphaAngle) * terrainHeight;
float rightWidth = Ogre::Math::Cos(alphaAngle) * terrainWidth;
outerSquareWidth = leftWidth + rightWidth;
float topHeight = Ogre::Math::Sin(alphaAngle) * terrainWidth;
float bottomHeight = Ogre::Math::Cos(alphaAngle) * terrainHeight;
outerSquareHeight = topHeight + bottomHeight;
originPoint = Ogre::Vector3(terrainData->mMaxX,0,terrainData->mMaxZ) +
(-mMoveZDir * topHeight);
float projectOffset = yPos / Ogre::Math::Tan(mCamDirAngle);
originPoint.x += (mInvertCameraDir * projectOffset ).x;
originPoint.z += (mInvertCameraDir * projectOffset ).z;
break;
}
case WestSouth :
{
float leftWidth = Ogre::Math::Sin(alphaAngle) * terrainHeight;
float rightWidth = Ogre::Math::Cos(alphaAngle) * terrainWidth;
outerSquareWidth = leftWidth + rightWidth;
float topHeight = Ogre::Math::Sin(alphaAngle) * terrainWidth;
float bottomHeight = Ogre::Math::Cos(alphaAngle) * terrainHeight;
outerSquareHeight = topHeight + bottomHeight;
originPoint = Ogre::Vector3(terrainData->mMinX,0,terrainData->mMaxZ) +
(-mMoveZDir * rightWidth);
float projectOffset = yPos / Ogre::Math::Tan(mCamDirAngle);
originPoint.x += (mInvertCameraDir * projectOffset ).x;
originPoint.z += (mInvertCameraDir * projectOffset ).z;
break;
}
default:
{
OGRE_EXCEPT(Ogre::Exception::ERR_INTERNAL_ERROR,
" wrong camera dir " + Ogre::StringConverter::toString(mCameraDir),
"MiniMapMaker::outputTextures");
break;
}
}
// 计算投影的长度
Real factor = Ogre::Math::Sin(mCamDirAngle);
if (factor > 0.0f && factor != 1.0f)
projectSize = mTileSize / factor;
// 根据当前场景的大小，计算需要的分块数
xIndex = Ogre::Math::Ceil( (outerSquareWidth) / mTileSize ) + 1;
zIndex = Ogre::Math::Ceil( (outerSquareHeight) / projectSize ) + 1;
}
else
{
xIndex = Ogre::Math::Ceil( (terrainData->mMaxX - terrainData->mMinX) / mTileSize ) + 1;
zIndex = Ogre::Math::Ceil( (terrainData->mMaxZ - terrainData->mMinZ) / mTileSize ) + 1;
originPoint.x = terrainData->mMinX;
originPoint.z = terrainData->mMinZ;
}
// 计算最终的mini map的大小
uint miniMapWidth = xIndex * mTexWidth;
uint miniMapHeight = zIndex * mTexHeight;
if ( miniMapWidth > 10000 || miniMapHeight > 10000 )
{
mLastErrorString = "texture size is out of range!";
return false;
}
// 创建mini map所需的内存空间
uchar* miniMapData = new uchar[miniMapWidth * miniMapHeight * Ogre::PixelUtil::getNumElemBytes(mOutPutFormat)];
//// 初始的摄像机位置
Real xPos = originPoint.x;
Real zPos = originPoint.z;
for ( int i=0; i<xIndex; ++i )
{
for ( int j=0; j<zIndex; ++j )
{
// 设置摄像机位置，并更新render texture的内容
mCamera->setPosition(xPos, yPos, zPos);
mRenderTexture->update();
String fileName = mPath + mSceneBaseName + Ogre::StringConverter::toString(i)
+ "_" + Ogre::StringConverter::toString(j) + "." + mTexExtension;
// 输出小纹理文件
mRenderTexture->writeContentsToFile(fileName);
mTempOutputFileNames.push_back(fileName);
// 读取刚创建的纹理
Ogre::Image* tempImage = new Ogre::Image;
tempImage->load(mSceneBaseName + Ogre::StringConverter::toString(i)
+ "_" + Ogre::StringConverter::toString(j) + "." + mTexExtension, TEMP_GROUP_NAME);
// 获取render texture中的内容
uchar* tempImageData = tempImage->getData();
// 定位在mini map中的左上角
uint miniMapIndex = ( j * mTexHeight * miniMapWidth + i * mTexWidth ) * Ogre::PixelUtil::getNumElemBytes(mOutPutFormat);
uchar* startData = miniMapData + miniMapIndex;
for ( size_t height = 0; height < tempImage->getHeight(); ++height )
{
for ( size_t width = 0; width < tempImage->getWidth(); ++width )
{
memcpy(startData, tempImageData, Ogre::PixelUtil::getNumElemBytes(mOutPutFormat));
startData += Ogre::PixelUtil::getNumElemBytes(mOutPutFormat);
tempImageData += Ogre::PixelUtil::getNumElemBytes( tempImage->getFormat() );
}
startData += (miniMapWidth - tempImage->getWidth()) * Ogre::PixelUtil::getNumElemBytes(mOutPutFormat);
}
delete tempImage;
// 移动摄像机的z坐标
if (mUseRealCameraAngle)
{
zPos += (mInvertCameraDir * (projectSize)).z;
xPos += (mInvertCameraDir * (projectSize)).x;
}
else
zPos += mTileSize;
}
if (mUseRealCameraAngle)
{
xPos = originPoint.x;
zPos = originPoint.z;
xPos += (mMoveZDir * (mTileSize) * (i+1)).x;
zPos += (mMoveZDir * (mTileSize) * (i+1)).z;
}
else
{
// 操作完每一列之后，重置摄像机的z坐标
zPos = terrainData->mMinZ;
// 移动摄像机的x坐标
xPos += mTileSize;
}
}
// 保存mini map并输出
Ogre::Image* miniMapImage = new Ogre::Image;
miniMapImage->loadDynamicImage(miniMapData, miniMapWidth, miniMapHeight, 1, mOutPutFormat, true);
miniMapImage->save(mPath + mOutFileName + "." + mTexExtension);
delete miniMapImage;
rgm.destroyResourceGroup(TEMP_GROUP_NAME);
return true;
}
AssetLoadState TextureAsset::DeserializeFromData(const u8 *data, size_t numBytes)
{
if (!data)
return ASSET_LOAD_FAILED; ///\todo Log out error.
if (numBytes == 0)
return ASSET_LOAD_FAILED; ///\todo Log out error.
// Don't load textures to memory in headless mode
if (assetAPI->IsHeadless())
{
return ASSET_LOAD_FAILED;
}
if (OGRE_THREAD_SUPPORT != 0)
{
// We can only do threaded loading from disk, and not any disk location but only from asset cache.
// local:// refs will return empty string here and those will fall back to the non-threaded loading.
// Do not change this to do DiskCache() as that directory for local:// refs will not be a known resource location for ogre.
QString cacheDiskSource = assetAPI->GetAssetCache()->GetDiskSource(QUrl(Name()));
if (!cacheDiskSource.isEmpty())
{
QFileInfo fileInfo(cacheDiskSource);
std::string sanitatedAssetRef = fileInfo.fileName().toStdString();
loadTicket_ = Ogre::ResourceBackgroundQueue::getSingleton().load(Ogre::TextureManager::getSingleton().getResourceType(),
sanitatedAssetRef, OgreRenderer::OgreRenderingModule::CACHE_RESOURCE_GROUP,
false, 0, 0, this);
return ASSET_LOAD_PROCESSING;
}
}
try
{
// Convert the data into Ogre's own DataStream format.
std::vector<u8> tempData(data, data + numBytes);
#include "DisableMemoryLeakCheck.h"
Ogre::DataStreamPtr stream(new Ogre::MemoryDataStream(&tempData[0], tempData.size(), false));
#include "EnableMemoryLeakCheck.h"
// Load up the image as an Ogre CPU image object.
Ogre::Image image;
image.load(stream);
if (ogreTexture.isNull()) // If we are creating this texture for the first time, create a new Ogre::Texture object.
{
ogreAssetName = OgreRenderer::SanitateAssetIdForOgre(this->Name().toStdString()).c_str();
ogreTexture = Ogre::TextureManager::getSingleton().loadImage(ogreAssetName.toStdString(), Ogre::ResourceGroupManager::DEFAULT_RESOURCE_GROUP_NAME, image);
}
else // If we're loading on top of an Ogre::Texture we've created before, don't lose the old Ogre::Texture object, but reuse the old.
{ // This will allow all existing materials to keep referring to this texture, and they'll get the updated texture image immediately.
ogreTexture->freeInternalResources();
if (image.getWidth() != ogreTexture->getWidth() || image.getHeight() != ogreTexture->getHeight() || image.getFormat() != ogreTexture->getFormat())
{
ogreTexture->setWidth(image.getWidth());
ogreTexture->setHeight(image.getHeight());
ogreTexture->setFormat(image.getFormat());
}
if (ogreTexture->getBuffer().isNull())
{
LogError("DeserializeFromData: Failed to create texture " + this->Name().toStdString() + ": OgreTexture::getBuffer() was null!");
return ASSET_LOAD_FAILED;
}
Ogre::PixelBox pixelBox(Ogre::Box(0,0, image.getWidth(), image.getHeight()), image.getFormat(), (void*)image.getData());
ogreTexture->getBuffer()->blitFromMemory(pixelBox);
ogreTexture->createInternalResources();
}
return ASSET_LOAD_SUCCESFULL;
}
catch (Ogre::Exception &e)
{
LogError("DeserializeFromData: Failed to create texture " + this->Name().toStdString() + ": " + std::string(e.what()));
return ASSET_LOAD_FAILED;
}
}
void
BrushSelector::buildPreviewBitmap( const Fairy::TextureInfo texInfo )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = GetSceneManipulator()->getPreviewImage(texInfo.ownerTextureName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 所选纹理的大小
size_t newImageWidth = texInfo.width*TexTileSize;
size_t newImageHeight = texInfo.height*TexTileSize;
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = newImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[newImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
// 得知起始像素点
size_t startPoint = ( oriImageWidth * texInfo.topCorner + texInfo.leftCorner )
* TexTileSize * oriImage->getBPP()/BytePerPixel;
Ogre::uchar *oriImagedataPointer = oriImageData + startPoint;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<newImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,newImageWidth,newImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( texInfo.width > 1 || texInfo.height > 1 )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue + mBlackWhitePreviewImage.GetRed(i,j) * ( 1.0f - alphaValue);
unsigned char g = col.g*255 * alphaValue + mBlackWhitePreviewImage.GetGreen(i,j) * ( 1.0f - alphaValue);
unsigned char b = col.b*255 * alphaValue + mBlackWhitePreviewImage.GetBlue(i,j) * ( 1.0f - alphaValue);
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
// 设置到缩略图控件中
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
}
void
MaterialPreviewDialog::buildPreviewBitmap( const Ogre::String &texName )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = getPreviewImage(texName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = oriImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = new Ogre::uchar[oriImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
Ogre::uchar *oriImagedataPointer = oriImageData;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<oriImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,oriImageWidth,oriImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( oriImageWidth > mPreviewImageWidth || oriImageHeight > mPreviewImageHeight )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::uchar *tempPtr = newImage.getData();
assert (tempPtr);
for ( size_t i=0; i<mPreviewImageHeight; ++i )
for ( size_t j=0; j<mPreviewImageWidth; ++j )
{
// 取出alpha值
float alphaValue = (float)tempPtr[3] / 255.0f;
// 计算出经过alpha混合后的颜色值
unsigned char r = tempPtr[2] * alphaValue;
unsigned char g = tempPtr[1] * alphaValue;
unsigned char b = tempPtr[0] * alphaValue;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
tempPtr += 4;
}
// 要把指针移回到图片数据的
tempPtr -= mPreviewImageHeight * mPreviewImageWidth * 4;
// 设置到缩略图控件中
}
// 没有alpha，就直接拷贝数据
else
{
memcpy ( mCurrentPreviewImage.GetData(), newImage.getData(), newImage.getSize() );
}
}
void
MaterialPreviewDialog::buildPreviewBitmap( const Ogre::String &texName )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = getPreviewImage(texName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = oriImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[oriImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
Ogre::uchar *oriImagedataPointer = oriImageData;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<oriImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,oriImageWidth,oriImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( oriImageWidth > mPreviewImageWidth || oriImageHeight > mPreviewImageHeight )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue;
unsigned char g = col.g*255 * alphaValue;
unsigned char b = col.b*255 * alphaValue;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
}
// ----------------------------------------------------------------------
void FontSerializer::exportFont(const Font *pFont, const Ogre::String &fileName)
{
// Open/create the file
mpfFile = fopen(fileName.c_str(), "wb");
if (!mpfFile)
{
// Throw an error if the file was not found, or was not possible to read
SONETTO_THROW("A file was not found!");
}
fwrite(&Font::mFourCC, sizeof(uint32), 1, mpfFile);
fwrite(&pFont->mVersion, sizeof(uint32), 1, mpfFile);
fwrite(&pFont->mEncode, sizeof(uint32), 1, mpfFile);
fwrite(&pFont->mVerticalOffsetTop, sizeof(float), 1, mpfFile);
fwrite(&pFont->mVerticalOffsetBottom, sizeof(float), 1, mpfFile);
fwrite(&pFont->mHorizontalScale, sizeof(float), 1, mpfFile);
saveString(pFont->mIName);
if(pFont->mMaterial.isNull())
SONETTO_THROW("Material does not exist");
Ogre::Pass * pass = pFont->mMaterial->getTechnique(0)->getPass(0);
bool has_separate_blend = pass->hasSeparateSceneBlending();
uint32 mat_scene_blend_source = (uint32)pass->getSourceBlendFactor();
uint32 mat_scene_blend_dest = (uint32)pass->getDestBlendFactor();
uint32 mat_scene_blend_source_a = (uint32)pass->getSourceBlendFactorAlpha();
uint32 mat_scene_blend_dest_a = (uint32)pass->getDestBlendFactorAlpha();
fwrite(&has_separate_blend, sizeof(bool), 1, mpfFile);
fwrite(&mat_scene_blend_source, sizeof(uint32), 1, mpfFile);
fwrite(&mat_scene_blend_dest, sizeof(uint32), 1, mpfFile);
fwrite(&mat_scene_blend_source_a, sizeof(uint32), 1, mpfFile);
fwrite(&mat_scene_blend_dest_a, sizeof(uint32), 1, mpfFile);
uint32 mat_alpha_reject_func = (uint32)pass->getAlphaRejectFunction();
uint8 mat_alpha_reject_val = (uint8)pass->getAlphaRejectValue();
bool map_alpha_reject_atc = pass->isAlphaToCoverageEnabled();
fwrite(&mat_alpha_reject_func, sizeof(uint32), 1, mpfFile);
fwrite(&mat_alpha_reject_val, sizeof(uint8), 1, mpfFile);
fwrite(&map_alpha_reject_atc, sizeof(bool), 1, mpfFile);
Ogre::TextureUnitState * texunit = pass->getTextureUnitState(0);
Ogre::TextureUnitState::UVWAddressingMode tex_address_mode_uvw = texunit->getTextureAddressingMode();
uint32 tex_address_mode_u = (uint32)tex_address_mode_uvw.u;
uint32 tex_address_mode_v = (uint32)tex_address_mode_uvw.v;
uint32 tex_address_mode_w = (uint32)tex_address_mode_uvw.w;
uint32 tex_filtering_min = (uint32)texunit->getTextureFiltering(Ogre::FT_MIN);
uint32 tex_filtering_mag = (uint32)texunit->getTextureFiltering(Ogre::FT_MAG);
Ogre::ColourValue tex_border_color = texunit->getTextureBorderColour();
fwrite(&tex_address_mode_u,sizeof(uint32), 1, mpfFile);
fwrite(&tex_address_mode_v,sizeof(uint32), 1, mpfFile);
fwrite(&tex_address_mode_w,sizeof(uint32), 1, mpfFile);
fwrite(&tex_filtering_min,sizeof(uint32), 1, mpfFile);
fwrite(&tex_filtering_mag,sizeof(uint32), 1, mpfFile);
fwrite(tex_border_color.ptr(),sizeof(float)*4, 1, mpfFile);
uint32 colsize = (uint32)pFont->mColorList.size();
fwrite(&colsize,sizeof(uint32), 1, mpfFile);
for(uint32 i = 0; i != colsize; ++i)
{
fwrite(pFont->mColorList[i].ptr(),sizeof(float)*4, 1, mpfFile);
}
for(uint32 i = 0; i != 256; ++i)
{
FontGlyph glyph = pFont->mGlyph[i];
fwrite(&glyph, sizeof(FontGlyph), 1,mpfFile);
}
Ogre::Image * tex = pFont->mFontImage;
size_t uWidth = tex->getWidth();
size_t uHeight = tex->getHeight();
size_t uDepth = tex->getDepth();
size_t eFormat = (uint32)tex->getFormat();
size_t numFaces = tex->getNumFaces();
size_t numMipMaps = tex->getNumMipmaps();
fwrite(&uWidth, sizeof(size_t), 1, mpfFile);
fwrite(&uHeight, sizeof(size_t), 1, mpfFile);
fwrite(&uDepth, sizeof(size_t), 1, mpfFile);
fwrite(&eFormat, sizeof(size_t), 1, mpfFile);
fwrite(&numFaces, sizeof(size_t), 1, mpfFile);
fwrite(&numMipMaps, sizeof(size_t), 1, mpfFile);
size_t texdatasize = Ogre::Image::calculateSize(numMipMaps,
numFaces,
uWidth,
uHeight,
uDepth,
(Ogre::PixelFormat)eFormat);
fwrite(tex->getData(),texdatasize, 1,mpfFile);
}
/* -----------------------------------------------------------------------
| build bullet height field shape and generate ogre mesh from grayscale image
|
| @param in :
| @param out: raw data of height field terrain
| ToDo: adjest grid scale, grid height, local scale, max/min height
----------------------------------------------------------------------- */
bool
buildHeightFieldTerrainFromImage(const Ogre::String& filename,
btDynamicsWorld* dynamicsWorld,
btAlignedObjectArray<btCollisionShape*>& collisionShapes,
void* &data)
{
Ogre::Image img;
try
{
img.load(filename, Ogre::ResourceGroupManager::DEFAULT_RESOURCE_GROUP_NAME);
}
catch(Ogre::Exception err)
{
LOG(err.what());
return false;
}
size_t grid_w = 65, grid_h = 65; // must be (2^N) + 1
size_t grid_max_w = 129, grid_max_h = 129; // must be (2^N) + 1
size_t img_w = img.getWidth();
size_t img_h = img.getHeight();
// validate image size is (2^N) + 1
if ((img_w-1) & (img_w-2)) img_w = grid_w;
if ((img_h-1) & (img_h-2)) img_h = grid_h;
//if (img_w > grid_max_w) img_w = grid_max_w;
//if (img_h > grid_max_h) img_h = grid_max_h;
LOG("LoadImage name=%s, width=%d, height=%d, width^2+1=%d, height^2+1=%d",
filename.c_str(), img.getWidth(), img.getHeight(), img_w, img_h);
img.resize(img_w, img_h);
size_t pixelSize = Ogre::PixelUtil::getNumElemBytes(img.getFormat());
size_t bufSize = img.getSize() / pixelSize;
data = new Ogre::Real[ bufSize ];
Ogre::Real* dest = static_cast<Ogre::Real*>(data);
memset(dest, 0, bufSize);
/*
| @ Notice the alignment problem
| - uchar to float alignment
| - pixel format in bytes as rawdata type, also affects alignment
*/
Ogre::uchar* src = img.getData();
for (size_t i=0;i<bufSize;++i)
{
dest[i] = ((Ogre::Real)src[i * pixelSize] - 127.0f)/16.0f;
}
// parameter
int upAxis = 1;
btScalar gridSpacing = 5.0f;
btScalar gridHeightScale = 0.2f;
btScalar minHeight = -10.0f;
btScalar maxHeight = 10.0f;
btScalar defaultContactProcessingThreshold = BT_LARGE_FLOAT;
btHeightfieldTerrainShape *heightfieldShape =
new btHeightfieldTerrainShape(img_w, img_h,
dest,
gridHeightScale,
minHeight, maxHeight,
upAxis, PHY_FLOAT, false);
btAssert(heightfieldShape && "null heightfield");
// shape
btVector3 localScaling(1.0f, 1.0f, 1.0f);
heightfieldShape->setLocalScaling(localScaling);
collisionShapes.push_back(heightfieldShape);
// rigidBody
btDefaultMotionState* motionState = new btDefaultMotionState(btTransform(btQuaternion(0,0,0,1),btVector3(0,0,0)));
btRigidBody::btRigidBodyConstructionInfo cInfo(0, motionState, heightfieldShape, btVector3(0,0,0));
btRigidBody* rigidBody = new btRigidBody(cInfo);
rigidBody->setContactProcessingThreshold(defaultContactProcessingThreshold);
int flags = rigidBody->getCollisionFlags();
rigidBody->setCollisionFlags(flags | btCollisionObject::CF_DISABLE_VISUALIZE_OBJECT);
dynamicsWorld->addRigidBody(rigidBody);
// add ogre height field mesh
Ogre::SceneManager* sceneMgr = Ogre::Root::getSingletonPtr()->getSceneManager("DefaultSceneManager");
btAssert(sceneMgr);
Ogre::ManualObject* obj = sceneMgr->createManualObject("btHeightFieldEntity");
btVector3 aabbMin, aabbMax;
heightfieldShape->getAabb(btTransform(btQuaternion(0,0,0,1),btVector3(0,0,0)), aabbMin, aabbMax);
btHeightFieldProcessor callback(obj, "DefaultPlane");
heightfieldShape->processAllTriangles(&callback, aabbMin, aabbMax);
sceneMgr->getRootSceneNode()->attachObject(obj);
return true;
}