This program has to be compiled under the C++11 spec (the latest compilers should have sufficient support). The following dependencies are required when building StereoRecontruction:

• Qt 5.2.1
• OpenCV 2.2
• gsl 1.14
• Boost 1.46
• Eigen 3
• GLEW 1.5.8

Additionally, some options (see "Tunable Options" below) will require additional libraries:

• OpenEXR 1.6.1 (when hdr option enabled)
• Intel TBB 3.0 (when tbb option enabled)
• Point Grey Research FlyCap 2.x SDK (when pgr option enabled)
• Point Grey Research Digiclops SDK (when pgr option enabled)
• Point Grey Research Triclops SDK (when pgr option enabled)
• Middlebury MRF library (when mrf option enabled)

The recommended environment for building StereoReconstruction is Qt Creator 2.x.

User-specific configuration options should be placed in a file named UserConfig.pri in the same directory as the project file. Various options that can be added to the CONFIG variable:

• hdr: Enables HDR imaging options
• tbb: Use Intel Thread Building Blocks library for parallel computation whenever possible.
• openmp: Use OpenMP for parallel computation whenever possible. If tbb is specified then OpenMP is ignored.
• mrf: Use MRF optimization for stereo, with the TRW-S method. If not enabled, winner-take-all is used.
• splats: Use splats when rendering point clouds. If not enabled, basic point rendering is used.
• pgr: Link against and use the PointGrey FlyCap SDK for image capturing functionality.

Also, be sure to specify any non-standard library/include paths in your user config file. To see which libraries are included for each of the above options, browse down through this file.

The following workflow shows how you can find depth maps for the example project provided in the example/ subdirectory.

1. After starting the program, open example/project.xml.
2. Find the checkboard features. 2.1. Click the Stereo -> Find Features... menu item. 2.2. In the dialog that appears, select all the image sets that contain a checkerboard pattern for calibration. In the example, this is every image set besides bunny. 2.3. Click Find Features. The dialog will close and a background task will start to find the features. You can see this task in the task window. If the task window doesn't open, click the View -> Show Task List menu item.
3. Ensure features are correctly oriented. Sometimes the feature detector will output features in the reverse orientation. You should go through every image set for every camera and make sure the features are oriented correctly. If you find a camera/image pair with features oriented in the wrong direction, you can right-click the image and select the Rotate Features popup menu item.
4. Find feature correspondences. Click the Stereo -> Find Feature Correspondences menu item. Currently, no background task is executed because this task is finishes fairly quickly.
5. Calibrate the cameras. 5.1. Click the Calibrate Cameras... menu item. 5.2. In the dialog that appears, select the image sets that contain checkerboard features. Selecting all image sets is fine as the calibration task ignores images with no features. 5.3. Click Calibrate. The dialog will close and a background task will start calibrating the cameras.
6. After the calibration task completes, you can view the result by clicking the View -> View Camera Layout menu item. If the calibration was successful, you should see a semi-circle containing the eight cameras.

1. In the Refractive Calibration tab, select the bunny image set.
2. Once successfully calibrated, you should be able to click an image and see a green line in the other image. This is the epipolar line.
   • If you cannot see the line, you may need to adjust the min/max depth parameters in the Stereo tab. The example project will likely require a min and max depth of 300 and 800, respectively.
   • Clicking near a feature will snap the point of interest in that image to the feature's location. You can see the feature's reprojection error in the Stereo tab.
3. For the example, try setting the following additional parameters:
   • Cross-check threshold: 5
   • Num-depth levels: 100
   • Scale: 0.5
4. In the Stereo tab, click Compute Depth Maps. 4.1. A background task will start to compute the depth maps for the bunny image set. This is a lengthy process if you compiled the code to use geodesic support weights (the default), so head off and do some other important research while waiting :) 4.2. Once complete, you should see the depth maps below the corresponding images in the preview area. To see depth maps of other cameras, select the camera of interest in the Refractive Calibration tab for either the Left View or Right View.