This is the README for chrony.

What is chrony?
===============

chrony is a versatile implementation of the Network Time Protocol (NTP).
It can synchronize the system clock with NTP servers, reference clocks
(e.g. GPS receiver), and manual input using wristwatch and keyboard.
It can also operate as an NTPv4 (RFC 5905) server and peer to provide
a time service to other computers in the network.

It is designed to perform well in a wide range of conditions, including
intermittent network connections, heavily congested networks, changing
temperatures (ordinary computer clocks are sensitive to temperature),
and systems that do not run continuosly, or run on a virtual machine.

Typical accuracy between two machines on a LAN is in tens, or a few
hundreds, of microseconds; over the Internet, accuracy is typically
within a few milliseconds.  With a good hardware reference clock
sub-microsecond accuracy is possible.

Two programs are included in chrony, chronyd is a daemon that can be
started at boot time and chronyc is a command-line interface program
which can be used to monitor chronyd's performance and to change various
operating parameters whilst it is running.

What will chrony run on?
========================

The software is known to work on Linux, FreeBSD, NetBSD, Mac OS X and
Solaris.  Closely related systems may work too.  Any other system will
likely require a porting exercise.  You would need to start from one
of the existing system-specific drivers and look into the quirks of
certain system calls and the kernel on your target system.

How do I set it up?
===================

The file INSTALL gives instructions.  On supported systems the
compilation process should be automatic.

You will need an ANSI C compiler -- gcc is recommended.

The manual (in texinfo and text formats) describes how to set the
software up for the less straightforward cases.

What documentation is there?
============================

A manual is supplied in Texinfo format (chrony.texi) and
ready-formatted plain text (chrony.txt) in the distribution.

There is also information available on the chrony web pages, accessible
through the URL 

    https://chrony.tuxfamily.org/

Where are new versions announced?
=================================

There is a low volume mailing list where new versions and other
important news relating to chrony is announced.  You can join this list
by sending mail with the subject "subscribe" to

chrony-announce-request@chrony.tuxfamily.org

These messages will be copied to chrony-users (see below).

How can I get support for chrony?
and where can I discuss new features, possible bugs etc?
========================================================

There are 3 mailing lists relating to chrony.  chrony-announce was
mentioned above.  chrony-users is a users' discussion list, e.g. for
general questions and answers about using chrony.  chrony-dev is a more
technical list, e.g. for discussing how new features should be
implemented, exchange of information between developers etc.  To
subscribe to either of these lists, send a message with the subject
"subscribe" to

chrony-users-request@chrony.tuxfamily.org
or
chrony-dev-request@chrony.tuxfamily.org

as applicable.

When you are reporting a bug, please send us all the information you can.
Unfortunately, chrony has proven to be one of those programs where it is very
difficult to reproduce bugs in a different environment. So we may have to
interact with you quite a lot to obtain enough extra logging and tracing to
pin-point the problem in some cases. Please be patient and plan for this!

License
=======

chrony is distributed under the GNU General Public License version 2.


Author
======

Richard P. Curnow <rc@rc0.org.uk>


Maintainers
===========

Miroslav Lichvar <mlichvar@redhat.com>


Acknowledgements
================

In writing the chronyd program, extensive use has been made of RFC 1305
and RFC 5905, written by David Mills. The source code of the NTP reference
implementation has been used to check the details of the protocol.

The following people have provided patches and other major contributions
to the program :

Benny Lyne Amorsen <benny@amorsen.dk>
    Patch to add minstratum option

Andrew Bishop <amb@gedanken.demon.co.uk>
    Fixes for bugs in logging when in daemon mode
    Fixes for compiler warnings
    Robustness improvements for drift file
    Improve installation (directory checking etc)
    Entries in contrib directory
    Improvements to 'sources' and 'sourcestats' output from chronyc
    Improvements to documentation
    Investigation of required dosynctodr behaviour for various Solaris
      versions.

Stephan I. Boettcher <stephan@nevis1.columbia.edu>
    Entries in contrib directory

Erik Bryer <ebryer@spots.ab.ca>
    Entries in contrib directory

Bryan Christianson <bryan@whatroute.net>
    Support for Mac OS X
    Support for privilege separation
    Entries in contrib directory

Juliusz Chroboczek <jch@pps.jussieu.fr>
    Fix install rule in Makefile if chronyd file is in use.

Paul Elliott <pelliott@io.com>
    DNSchrony (in contrib directory), a tool for handling NTP servers
    with variable IP addresses.

Mike Fleetwood <mike@rockover.demon.co.uk>
    Fixes for compiler warnings

Alexander Gretencord <arutha@gmx.de>
    Changes to installation directory system to make it easier for
    package builders.

Andrew Griffiths <agriffit@redhat.com>
    Patch to add support for seccomp filter

Walter Haidinger <walter.haidinger@gmx.at>
    Providing me with login access to a Linux installation where v1.12
    wouldn't compile, so I could develop the fixes for v1.13.  Also, for
    providing the disc space so I can keep an independent backup of the
    sources.

Juergen Hannken-Illjes <hannken@eis.cs.tu-bs.de>
    Port to NetBSD

John Hasler <john@dhh.gt.org>
    Project and website at tuxfamily.org
    Changes to support 64 bit machines (i.e. those where
      sizeof(unsigned long) > 4)
    Bug fix to initstepslew directive
    Fix to remove potential buffer overrun errors.
    Memory locking and real-time scheduler support
    Fix fault where chronyd enters an endless loop

Tjalling Hattink <t.hattink@fugro.nl>
    Fix scheduler to allow stepping clock from timeout handler
    Patch to take leap second in PPS refclock from locked source
    Patch to make reading of RTC for initial trim more reliable

Liam Hatton <me@liamhatton.com>
    Advice on configuring for Linux on PPC

Jachym Holecek <jakym@volny.cz>
    Patch to make Linux real time clock work with devfs

Håkan Johansson <f96hajo@chalmers.se>
    Patch to avoid large values in sources and sourcestats output

Jim Knoble <jmknoble@pobox.com>
    Fixes for compiler warnings

Antti Jrvinen <costello@iki.fi>
    Advice on configuring for BSD/386

Miroslav Lichvar <mlichvar@redhat.com>
    Reference clock support
    IPv6 support
    Linux capabilities support
    Leap second support
    Improved source selection
    Improved sample history trimming
    Improved polling interval adjustment
    Improved stability with temporary asymmetric delays
    Temperature compensation
    Many other bug fixes and improvements

Victor Moroz <vim@prv.adlum.ru>
    Patch to support Linux with HZ!=100

Kalle Olavi Niemitalo  <tosi@stekt.oulu.fi>
    acquisitionport support

Frank Otto <sandwichmacher@web.de>
    Handling arbitrary HZ values

Gautier PHILIPPON <gautier.philippon@ensimag.grenoble-inp.fr>
    Patch to add refresh command to chronyc

Andreas Piesk <apiesk@virbus.de>
    Patch to make chronyc use the readline library if available

Timo Teras <timo.teras@iki.fi>
    Patch to reply correctly on multihomed hosts

Stephen Wadeley <swadeley@redhat.com>
    Improvements to man pages

Wolfgang Weisselberg <weissel@netcologne.de>
    Entries in contrib directory

Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
    Many robustness and security improvements
    
Ulrich Windl <ulrich.windl@rz.uni-regensburg.de> for the
    Providing me with information about the Linux 2.2 kernel
    functionality compared to 2.0.

Doug Woodward <dougw@whistler.com>
    Advice on configuring for Solaris 2.8 on x86

Many other people have contributed bug reports and suggestions.  I'm
sorry I can't identify all of you individually.