/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization */
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LCD : Only one layer is used */
LCD_Config();
/* Our main starts here */
uint16_t ypos = 0, ymax = 0;
int8_t yincr = 1;
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLACK);
while(1) {
if(ypos == 0) {
yincr = 1;
ymax = BSP_LCD_GetYSize();
} else {
yincr = -1;
ymax = 0;
}
for(;yincr == 1 ? ypos < BSP_LCD_GetYSize() - Font24.Height : ypos > 0; ypos+=yincr) {
BSP_LCD_DisplayStringAt(0, ypos, (uint8_t*)"Hello to everyone!", CENTER_MODE);
}
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* This project template calls firstly two functions in order to configure MPU feature
and to enable the CPU Cache, respectively MPU_Config() and CPU_CACHE_Enable().
These functions are provided as template implementation that User may integrate
in his application, to enhance the performance in case of use of AXI interface
with several masters. */
/* Configure the MPU attributes as Write Through */
MPU_Config();
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 216 MHz */
SystemClock_Config();
/* Add your application code here
*/
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 200 MHz */
SystemClock_Config();
/* Init task */
osThreadDef(Start, StartThread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE *2);
osThreadCreate (osThread(Start), NULL);
/* Start the scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for( ;; );
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
if (HAL_Init() != HAL_OK)
{
Error_Handler();
}
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* -1- Initialize LEDs mounted on STM32756G-EVAL board */
BSP_LED_Init(LED1);
/* -2- Configure EXTI15_10 (connected to PC.13 pin) in interrupt mode */
EXTI15_10_IRQHandler_Config();
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 200 Mhz */
SystemClock_Config();
/* Initialize IO expander */
BSP_IO_Init();
/* Start task */
osThreadDef(USER_Thread, StartThread, osPriorityNormal, 0, 8 * configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(USER_Thread), NULL);
/* Create Application Queue */
osMessageQDef(osqueue, 1, uint16_t);
AppliEvent = osMessageCreate(osMessageQ(osqueue), NULL);
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for( ;; );
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 Mhz */
SystemClock_Config();
/* Initialize LEDs */
BSP_LED_Init(LED1);
/* Thread 1 definition */
osThreadDef(LED1, LED_Thread1, osPriorityNormal, 0, configMINIMAL_STACK_SIZE);
/* Start thread 1 */
LED1_ThreadId = osThreadCreate(osThread(LED1), NULL);
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for(;;);
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
uint32_t i;
uint32_t *ptrLcd;
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 200 MHz */
SystemClock_Config();
/*##-1- Initialise the LCD #################################################*/
BSP_LCD_Init();
/* Init LCD screen buffer */
ptrLcd = (uint32_t*)(LCD_FRAME_BUFFER);
for (i=0; i<(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()); i++)
{
ptrLcd[i]=0;
}
BSP_LCD_LayerDefaultInit(1, LCD_FRAME_BUFFER);
/* Enable the LCD */
BSP_LCD_DisplayOn();
/* Select the LCD Foreground layer */
BSP_LCD_SelectLayer(1);
/* Set active window */
BSP_LCD_SetLayerWindow(1, xoffset, yoffset, xsize, ysize);
/*##-2- Camera Initialisation and start capture ############################*/
/* Initialize the Camera */
BSP_CAMERA_Init(resolution);
/* Wait 1s before Camera snapshot */
HAL_Delay(1000);
/* Start the Camera Capture */
BSP_CAMERA_SnapshotStart((uint8_t *)CAMERA_FRAME_BUFFER);
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure the MPU attributes as Write Through */
MPU_Config();
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure LED1 and LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/* Configure the system clock to 200 MHz */
/* This function will be executed from SDRAM */
SystemClock_Config();
/*##-1- Fill the buffer in the SDRAM device ##########################################*/
Fill_Buffer(aTable, 1024, 0);
/*##-2- Read address of the buffer and stack pointer address ########################*/
uwTabAddr = (uint32_t)aTable; /* should be above 0x60000000 */
/* Get main stack pointer value */
MSPValue = __get_MSP(); /* should be above 0x60000000 */
/*##-3- Activate LEDs pending on read values ########################################*/
if ((uwTabAddr >= SDRAM_ADDRESS) && (MSPValue >= SDRAM_ADDRESS))
{
BSP_LED_On(LED1);
}
else
{ /* Toggle LED3 in an infinite loop */
while (1)
{
BSP_LED_Toggle(LED3);
/* Insert delay 100 ms */
HAL_Delay(100);
}
}
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Initialize BSP Led for N/A */
BSP_LED_Init(LED1);
/*##-1- Configure the UART peripheral ######################################*/
/* Put the USART peripheral in the Asynchronous mode (UART Mode) */
/* UART configured as follows:
- Word Length = 8 Bits (7 data bit + 1 parity bit) :
BE CAREFUL : Program 7 data bits + 1 parity bit in PC HyperTerminal
- Stop Bit = One Stop bit
- Parity = ODD parity
- BaudRate = 9600 baud
- Hardware flow control disabled (RTS and CTS signals) */
UartHandle.Instance = USARTx;
UartHandle.Init.BaudRate = 9600;
UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
UartHandle.Init.StopBits = UART_STOPBITS_1;
UartHandle.Init.Parity = UART_PARITY_ODD;
UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
UartHandle.Init.Mode = UART_MODE_TX_RX;
UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&UartHandle) != HAL_OK)
{
/* Initialization Error */
Error_Handler();
}
/* Output a message on Hyperterminal using printf function */
printf("\n\r UART Printf Example: retarget the C library printf function to the UART\n\r");
// printf("** Test finished successfully. ** \n\r");
sprintf
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED1 and LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/*##-1- Configure ADC1, ADC2 and ADC3 peripherals ################################*/
ADC_Config();
/*##-2- Enable ADC3 ########################################################*/
if(HAL_ADC_Start(&AdcHandle3) != HAL_OK)
{
/* Start Error */
Error_Handler();
}
/*##-3- Enable ADC2 ########################################################*/
if (HAL_ADC_Start(&AdcHandle2) != HAL_OK)
{
/* Start Error */
Error_Handler();
}
/*##-4- Start ADC1 and ADC2 multimode conversion process and enable DMA ####*/
if (HAL_ADCEx_MultiModeStart_DMA(&AdcHandle1, (uint32_t *)aADCTripleConvertedValue, 3) != HAL_OK)
{
/* Start Error */
Error_Handler();
}
/* Infinite loop */
while (1)
{
}
}
int main (void) {
MPU_Config(); /* Configure the MPU */
CPU_CACHE_Enable(); /* Enable the CPU Cache */
HAL_Init(); /* Initialize the HAL Library */
BSP_SDRAM_Init(); /* Initialize BSP SDRAM */
SystemClock_Config(); /* Configure the System Clock */
init_filesystem(); /* Inital rl-flash Librart */
MainTask();
for (;;);
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 216 MHz */
SystemClock_Config();
/* Configure Key Button */
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/* Check if the KEY Button is pressed */
if(BSP_PB_GetState(BUTTON_KEY) == 0x00)
{
/* Test if user code is programmed starting from USBD_DFU_APP_DEFAULT_ADD address */
if(((*(__IO uint32_t*)USBD_DFU_APP_DEFAULT_ADD) & 0x2FFE0000 ) == 0x20000000)
{
/* Jump to user application */
JumpAddress = *(__IO uint32_t*) (USBD_DFU_APP_DEFAULT_ADD + 4);
JumpToApplication = (pFunction) JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t*) USBD_DFU_APP_DEFAULT_ADD);
JumpToApplication();
}
}
/* Otherwise enters DFU mode to allow user programming his application */
/* Init Device Library */
USBD_Init(&USBD_Device, &DFU_Desc, 0);
/* Add Supported Class */
USBD_RegisterClass(&USBD_Device, USBD_DFU_CLASS);
/* Add DFU Media interface */
USBD_DFU_RegisterMedia(&USBD_Device, &USBD_DFU_Flash_fops);
/* Start Device Process */
USBD_Start(&USBD_Device);
/* Run Application (Interrupt mode) */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure the MPU attributes as Write Through */
MPU_Config();
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash prefetch
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Initialize LED */
BSP_LED_Init(LED1);
/* Set to 1 if an transfer error is detected */
transferErrorDetected = 0;
transferCompleteDetected = 0;
/* Configure and enable the DMA stream for Memory to Memory transfer */
DMA_Config();
/* Infinite loop */
while (1)
{
if (transferErrorDetected == 1)
{
/* Toggle LED1 with a period of 200 ms */
BSP_LED_Toggle(LED1);
HAL_Delay(200);
transferErrorDetected = 0;
}
if (transferCompleteDetected == 1)
{
/* Turn LED1 on*/
BSP_LED_On(LED1);
transferCompleteDetected = 0;
}
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Initialize Tamper push-button, will be used to trigger an interrupt each time it's pressed.
In the ISR the PLL source will be changed from HSI to HSE circularly */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
/* Enable the PWR Clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Enable HSE oscillator and configure the PLL to reach the max system frequency (216 MHz)
when using HSE oscillator as PLL clock source. */
SystemClock_Config();
/* Output SYSCLK / 2 on MCO2 pin(PC.09) */
HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_2);
/* Since MFX is used, LED init is done after clock config */
/* Configure LED1 and LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/* Toggle some leds in an infinite loop */
while (1)
{
/* check if user button has been pressed to switch clock config */
if(SwitchClock != RESET)
{
SwitchSystemClock();
}
/* Toggle LED1 */
BSP_LED_Toggle(LED1);
HAL_Delay(100);
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 200 MHz */
SystemClock_Config();
/* Init Audio Application */
AUDIO_InitApplication();
/* Init Host Library */
USBH_Init(&hUSBHost, USBH_UserProcess, 0);
/* Add Supported Class */
USBH_RegisterClass(&hUSBHost, USBH_MSC_CLASS);
/* Start Host Process */
USBH_Start(&hUSBHost);
/* Run Application (Blocking mode) */
while (1)
{
/* USB Host Background task */
USBH_Process(&hUSBHost);
/* AUDIO Menu Process */
AUDIO_MenuProcess();
if ( MfxToggleLed == 1)
{
#if defined(USE_STM32756G_EVAL_REVA)
/* On RevA board, as LED1 is connected to MFX, the toggle is performed in main loop */
BSP_LED_Toggle(LED1);
#else
/* On RevB board, as LED1 is connected to GPIO, it is toggled in ISR,
* the LED4 is toggled in main loop as it is connected to MFX */
BSP_LED_Toggle(LED4);
#endif
MfxToggleLed = 0;
}
}
}
int main(void){
uint8_t lcd_status = LCD_OK;
CPU_CACHE_Enable();
HAL_Init();
/* Configura el reloj del sistema en 200 Mhz */
SystemClock_Config();
BSP_LED_Init(LED1);
/*Configura el botón de usuario en modo GPIO*/
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/*Inicializar LCD*/
lcd_status = BSP_LCD_Init();
if(lcd_status != LCD_OK)
while(1);
/*Inicializa LCD Layers*/
BSP_LCD_LayerDefaultInit(LTDC_ACTIVE_LAYER, SDRAM_DEVICE_ADDR);
Display_Description();
uint8_t detectSD = 0;
uint8_t SD_state = MSD_OK;
while(1){
if(BSP_PB_GetState(BUTTON_KEY) != 0){
HAL_Delay(500);
Display_Description();
detectSD = 1;
}
if(detectSD){
detectSD = 0;
SD_state = BSP_SD_Init();
if(SD_state != MSD_OK){
BSP_LCD_ClearStringLine(11);
BSP_LCD_ClearStringLine(12);
BSP_LCD_DisplayStringAt(0, (BSP_LCD_GetYSize()/2.5)+25, (uint8_t *)"Tarjeta SD no encontrada", CENTER_MODE);
}
else{
BSP_LCD_ClearStringLine(11);
BSP_LCD_ClearStringLine(12);
BSP_LCD_DisplayStringAt(0, (BSP_LCD_GetYSize()/2.5)+25, (uint8_t *)"Tarjeta SD encontrada", CENTER_MODE);
}
}
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED3 */
BSP_LED_Init(LED3);
/*##-1- TIM Peripheral Configuration ######################################*/
TIM_Config();
/*##-2- Configure the ADC peripheral ######################################*/
ADC_Config();
/*##-4- Start the conversion process and enable interrupt ##################*/
if (HAL_ADC_Start_IT(&AdcHandle) != HAL_OK)
{
/* Start Conversation Error */
Error_Handler();
}
__HAL_RCC_DAC_CLK_ENABLE();
/*##-3- TIM counter enable ################################################*/
if (HAL_TIM_Base_Start(&htim) != HAL_OK)
{
/* Counter Enable Error */
Error_Handler();
}
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
uint8_t lcd_status = LCD_OK;
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 200 Mhz */
SystemClock_Config();
BSP_LED_Init(LED1);
/* Configure the User Button in GPIO Mode */
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/*##-1- Initialize the LCD #################################################*/
/* Initialize the LCD */
lcd_status = BSP_LCD_Init();
ASSERT(lcd_status != LCD_OK);
/* Initialize the LCD Layers */
BSP_LCD_LayerDefaultInit(LTDC_ACTIVE_LAYER, LCD_FRAME_BUFFER);
Display_DemoDescription();
/* Wait For User inputs */
while (1)
{
if (BSP_PB_GetState(BUTTON_KEY) != RESET)
{
HAL_Delay(10);
while (BSP_PB_GetState(BUTTON_KEY) != RESET);
BSP_examples[DemoIndex++].DemoFunc();
if (DemoIndex >= COUNT_OF_EXAMPLE(BSP_examples))
{
/* Increment number of loops which be used by EEPROM example */
NbLoop++;
DemoIndex = 0;
}
Display_DemoDescription();
}
} /* of while (1) */
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 200 Mhz */
SystemClock_Config();
/* Init Dual Core Application */
DUAL_InitApplication();
/* Init HS Core */
USBH_Init(&hUSBHost_HS, USBH_HS_UserProcess, 1);
/* Init FS Core */
USBH_Init(&hUSBHost_FS, USBH_FS_UserProcess, 0);
/* Add Supported Classes */
USBH_RegisterClass(&hUSBHost_HS, USBH_MSC_CLASS);
USBH_RegisterClass(&hUSBHost_FS, USBH_HID_CLASS);
/* Start Host Process */
USBH_Start(&hUSBHost_FS);
USBH_Start(&hUSBHost_HS);
/* Register the file system object to the FatFs module */
if(f_mount(&USBH_fatfs, "", 0) != FR_OK)
{
LCD_ErrLog("ERROR : Cannot Initialize FatFs! \n");
}
/* Run Application (Blocking mode)*/
while (1)
{
/* USB Host Background tasks */
USBH_Process(&hUSBHost_FS);
USBH_Process(&hUSBHost_HS);
/* DUAL Menu Process */
DUAL_MenuProcess();
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* This project template calls firstly two functions in order to configure MPU feature
and to enable the CPU Cache, respectively MPU_Config() and CPU_CACHE_Enable().
These functions are provided as template implementation that User may integrate
in his application, to enhance the performance in case of use of AXI interface
with several masters. */
/* Configure the MPU attributes as Write Through */
MPU_Config();
/* Enable the CPU Cache */
CPU_CACHE_Enable();
#ifdef RTE_CMSIS_RTOS // when using CMSIS RTOS
osKernelInitialize(); // initialize CMSIS-RTOS
#endif
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 216 MHz */
SystemClock_Config();
/* Add your application code here
*/
BSP_SDRAM_Init();
Touch_Initialize();
#ifdef RTE_CMSIS_RTOS // when using CMSIS RTOS
Init_Thread1();
Init_Thread2();
osKernelStart(); // start thread execution
#endif
Analyzer_Init();
GUI_Init();
osMutexWait(mid_Thread_Mutex,osWaitForever);
Hello_MSG();
osMutexRelease(mid_Thread_Mutex);
osThreadTerminate(osThreadGetId());
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* This sample code shows how to use GPIO HAL API to toggle GPIOA-GPIO_PIN_0 IO
in an infinite loop. It is possible to connect a LED between GPIOA-GPIO_PIN_0
output and ground via a 330ohm resistor to see this external LED blink.
Otherwise an oscilloscope can be used to see the output GPIO signal */
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
if (HAL_Init() != HAL_OK)
{
Error_Handler();
}
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* -1- Enable each GPIO Clock (to be able to program the configuration registers) */
__HAL_RCC_GPIOF_CLK_ENABLE();
/* -2- Configure IOs in output push-pull mode to drive external LEDs */
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
GPIO_InitStruct.Pin = GPIO_PIN_10;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/* -3- Toggle IOs in an infinite loop */
while (1)
{
HAL_GPIO_TogglePin(GPIOF, GPIO_PIN_10);
/* Insert delay 100 ms */
HAL_Delay(100);
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED1, LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/* Enable Power Clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Check if the system was resumed from StandBy mode */
if (__HAL_PWR_GET_FLAG(PWR_FLAG_SB) != RESET)
{
/* Wait that user release the Tamper push-button */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
while(BSP_PB_GetState(BUTTON_TAMPER) == GPIO_PIN_SET){}
}
/* Initialize the Tamper push-button to generate external interrupts */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
/* RTC configuration */
RTC_Config();
/* Turn on LED1 */
BSP_LED_On(LED1);
while (1)
{
}
}
int main(void) {
CPU_CACHE_Enable();
HAL_Init();
SystemClock_Config();
BSP_LED_Init(LED_GREEN);
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);
// Start timer w/ 2sec interval
initTimer(20000);
// Infinite Loop
while (1) {
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED1, LED2, LED3 and LED4 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED2);
BSP_LED_Init(LED3);
BSP_LED_Init(LED4);
/* Creates the mutex */
osMutexDef(osMutex);
osMutex = osMutexCreate(osMutex(osMutex));
if(osMutex != NULL)
{
/* Define and create the high priority thread */
osThreadDef(MutHigh, MutexHighPriorityThread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE);
osHighPriorityThreadHandle = osThreadCreate(osThread(MutHigh), NULL);
/* Define and create the medium priority thread */
osThreadDef(MutMedium, MutexMeduimPriorityThread, osPriorityLow, 0, configMINIMAL_STACK_SIZE);
osMediumPriorityThreadHandle = osThreadCreate(osThread(MutMedium), NULL);
/* Define and create the low priority thread */
osThreadDef(MutLow, MutexLowPriorityThread, osPriorityIdle, 0, configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(MutLow), NULL);
}
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for(;;);
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 200 MHz */
SystemClock_Config();
/* Configure the BSP */
BSP_Config();
/* Initialize the LwIP stack */
lwip_init();
/* Configure the Network interface */
Netif_Config();
/* Http webserver Init */
httpd_init();
/* Notify user about the network interface config */
User_notification(&gnetif);
/* Infinite loop */
while (1)
{
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
/* Handle timeouts */
sys_check_timeouts();
#ifdef USE_DHCP
/* handle periodic timers for DHCP */
DHCP_Periodic_Handle(&gnetif);
#endif
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED1 and LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
if(CAN_Polling() == HAL_OK)
{
/* OK: Turn on LED1 */
BSP_LED_On(LED1);
}
else
{
/* KO */
/* Toggle LED3 */
while(1)
{
BSP_LED_Toggle(LED3);
}
}
/* Infinite loop */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 216 MHz */
SystemClock_Config();
/* Configure LED1 and LED3 */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/* Initialize Joystick */
if (BSP_JOY_Init(JOY_MODE_GPIO) == 0)
{
JoyButtonInitialized = 1;
}
/* Configure Key button for remote wakeup */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
/* Init Device Library */
USBD_Init(&USBD_Device, &HID_Desc, 0);
/* Add Supported Class */
USBD_RegisterClass(&USBD_Device, USBD_HID_CLASS);
/* Start Device Process */
USBD_Start(&USBD_Device);
/* Run Application (Interrupt mode) */
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* This sample code shows how to configure The HAL time base source base with a
dedicated Tick interrupt priority.
A general purpose timer(TIM6) is used instead of Systick as source of time base.
Time base duration is fixed to 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
*/
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 MHz */
SystemClock_Config();
/* Configure LED1 */
BSP_LED_Init(LED1);
/* Configure Tamper push-button */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
/* Insert a Delay of 1000 ms and toggle LED1, in an infinite loop */
while (1)
{
/* Insert a 1s delay */
HAL_Delay(1000);
/* Toggle LED1 */
BSP_LED_Toggle(LED1);
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the System clock to have a frequency of 200 Mhz */
SystemClock_Config();
/* Initialize IO expander */
BSP_IO_Init();
/* Init CDC Application */
CDC_InitApplication();
/* Init Host Library */
USBH_Init(&hUSBHost, USBH_UserProcess, 0);
/* Add Supported Class */
USBH_RegisterClass(&hUSBHost, USBH_CDC_CLASS);
/* Start Host Process */
USBH_Start(&hUSBHost);
/* Run Application (Blocking mode) */
while (1)
{
/* USB Host Background task */
USBH_Process(&hUSBHost);
/* CDC Menu Process */
CDC_MenuProcess();
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 216 Mhz */
SystemClock_Config();
/* Configure GPIO's to AN to reduce power consumption */
GPIO_ConfigAN();
/* Configure LED1 */
BSP_LED_Init(LED1);
/* Create the queue used by the two threads */
osMessageQDef(osqueue, QUEUE_LENGTH, uint16_t);
osQueue = osMessageCreate (osMessageQ(osqueue), NULL);
/* Note the Tx has a lower priority than the Rx when the threads are
spawned. */
osThreadDef(RxThread, QueueReceiveThread, osPriorityNormal, 0, configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(RxThread), NULL);
osThreadDef(TxThread, QueueSendThread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(TxThread), NULL);
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for(;;);
}
