BOOL BfxPixelOp::SetBitmap(KernelBitmap * pKB, DWORD theCacheStateMask, DWORD theCacheValueMask,
BOOL theDefaultValue)
{
Base = NULL;
ERROR2IF( ((!pKB) || (pKB->ActualBitmap==NULL)) ,FALSE,"BfxALU can't find OIL bitmap");
ERROR3IF( (!(pKB->ActualBitmap->IsKindOf(CC_RUNTIME_CLASS(CWxBitmap)) )),"BfxALU Oil layer inconsistency");
BITMAPINFOHEADER * pBMI=&(((CWxBitmap *)(pKB->ActualBitmap))->BMInfo->bmiHeader);
ERROR2IF( (BPP && pBMI->biBitCount != BPP), FALSE, "BfxPixelOp called with incorrect BPP");
Base = (DWORD *)(void *)(((CWxBitmap *)(pKB->ActualBitmap))->BMBytes);
Width = pBMI->biWidth;
INT32 Bits = pBMI->biBitCount;
switch (Bits)
{
case 1 : WidthRounded = (Width+31) &~31; break;
case 2 : WidthRounded = (Width+15) &~15; break;
case 4 : WidthRounded = (Width+7) &~7; break;
case 8 : WidthRounded = (Width+3) &~3; break;
case 16: WidthRounded = (Width+1) &~1; break;
case 32:
default:
WidthRounded = Width; break;
}
Height = pBMI->biHeight;
Size = (pBMI->biSizeImage)>>2;
return TRUE;
}
BOOL PointersTab::CommitSection()
{
TRACEUSER( "Neville", _T("commit PointersTab section\n"));
ERROR2IF(pPrefsDlg == NULL,FALSE,"PointersTab::CommitSection called with no dialog pointer");
BOOL ok = pPrefsDlg->TalkToPage(_R(IDD_OPTSTAB_POINTERS)); // The pointers page identifier
if (!ok)
return TRUE; // Talk to page failed to return now
// Section = Pointers
// Ok has been pressed so take the values from this section of the dialog box
BOOL Valid=FALSE; // Flag for validity of value
// BOOL State=FALSE; // Flag for state of button/switch
BOOL SetOk=TRUE; // Preference value set ok
// Middle button removed for now as nothing seems to use it.
// 0, 1 or 2 indicating Left Middle or Right mouse button
ButtonFunction LeftButton = (ButtonFunction)pPrefsDlg->GetSelectedValueIndex(_R(IDC_OPTS_LEFTBUTTON));
// ButtonFunction MiddleButton = (ButtonFunction)pPrefsDlg->GetSelectedValueIndex(_R(IDC_OPTS_MIDDLEBUTTON));
ButtonFunction RightButton = (ButtonFunction)pPrefsDlg->GetSelectedValueIndex(_R(IDC_OPTS_RIGHTBUTTON));
ClickModifiers::SetButtonFunc(0, LeftButton);
// ClickModifiers::SetButtonFunc(1, MiddleButton);
ClickModifiers::SetButtonFunc(2, RightButton);
// All units work off the selected document and so we must do nothing if there is no
// selected document. Check our clas variable to see if this is true or not.
// Units should have been set up by the caller.
if (pDocument == NULL || pSpread == NULL)
return (TRUE);
// Now the magnetic radii
INT32 LineRadius = 0;
INT32 PointRadius = 0;
LineRadius = pPrefsDlg->GetUnitGadgetValue(_R(IDC_OPTS_LINERADIUS), CurrentPageUnits,
0, INT_MAX, _R(IDE_OPTS_INVALIDLINERAD), &Valid);
TRACEUSER( "Neville", _T("commit LineRadius distance='%d' Valid ='%d'\n"),LineRadius, Valid);
if (Valid)
{
SetOk = Camelot.SetPrefValue(TEXT("Magnetic Options"), TEXT("Line Radius"), &LineRadius);
ERROR2IF(!SetOk,2,_R(IDE_OPTS_SETPREF_EDIT));
}
else
return FALSE; // Magnetic line radius incorrect, user has been warned already
PointRadius = pPrefsDlg->GetUnitGadgetValue(_R(IDC_OPTS_POINTRADIUS), CurrentPageUnits,
0, INT_MAX, _R(IDE_OPTS_INVALIDPOINTRAD), &Valid);
TRACEUSER( "Neville", _T("commit PointRadius distance='%d' Valid ='%d'\n"),PointRadius, Valid);
if (Valid)
{
SetOk = Camelot.SetPrefValue(TEXT("Magnetic Options"), TEXT("Point Radius"), &PointRadius);
ERROR2IF(!SetOk,2,_R(IDE_OPTS_SETPREF_EDIT));
}
else
return FALSE; // Magnetic point radius incorrect, user has been warned already
return TRUE;
}
/********************************************************************************************
> BOOL EllipseTool::Init()
Author: Peter_Arnold (Xara Group Ltd) <*****@*****.**>
Created: 18/03/95
Inputs: -
Outputs: -
Returns: TRUE/FALSE for success/failure
Purpose: Called to initialise the ellipse tool.
Errors: -
SeeAlso: QuickShapeBase::Init
********************************************************************************************/
BOOL EllipseTool::Init()
{
BOOL ok = TRUE;
pQuickShapeBaseInfoBarOp = new QuickShapeBaseInfoBarOp(this, _R(IDD_ELLIPSETOOLBAR));
return pQuickShapeBaseInfoBarOp != NULL;
PORTNOTE("dialog", "Removed Bar reading")
#if 0
CCResTextFile file; // Resource File
QuickShapeBaseInfoBarOpCreate BarCreate; // Object that creates QuickShapeBaseInfoBarOp objects
ok = file.open(_R(IDM_ELLIPSE_BAR), _R(IDT_INFO_BAR_RES)); // Open resource
if (ok) ok = DialogBarOp::ReadBarsFromFile(file,BarCreate); // Read and create info bar
if (ok) file.close(); // Close resource
ERROR2IF(!ok,FALSE,"Unable to load EllipseTool.ini from resource");
// Info bar now exists. Now get a pointer to it
String_32 str = String_32(_R(IDS_ELIPTOOL_INFOBARNAME));
DialogBarOp* pDialogBarOp = DialogBarOp::FindDialogBarOp(str);
ERROR2IF(pDialogBarOp==NULL, FALSE, "Ellipse infobar not found\n");
ok = pDialogBarOp->IsKindOf(CC_RUNTIME_CLASS(QuickShapeBaseInfoBarOp));
if (ok)
{
pQuickShapeBaseInfoBarOp = (QuickShapeBaseInfoBarOp*)pDialogBarOp;
pQuickShapeBaseInfoBarOp->pQuickShapeBase = this;
}
#endif
ERROR2IF(!ok,FALSE,"Error finding the Ellipse tool info bar");
return (ok);
}
BOOL FreeHandEPSFilter::ValidateGroup(Node *pGroup)
{
ERROR2IF(pGroup == 0, FALSE, "Group passed to validateGroup is null");
Node *pFirstChild = pGroup->FindFirstChild();
ERROR2IF(pFirstChild == 0, FALSE, "Group without children passed to ValidateGroup - should have been deleted by EndGroup");
if(pFirstChild->FindNext() == 0)
{
// there was only one object - delete this group.
// if pFirstNodeInRange is this node, set it to the child
if(pFirstNodeInRange == pGroup)
pFirstNodeInRange = pFirstChild;
// move the child to the parent of the group
if (!ImportInfo.pOp->DoMoveNode(pFirstChild, pNode, LASTCHILD))
return FALSE;
// see EPSFilter::EndGroup for the reason why it's hidden rather than deleted
if (!ImportInfo.pOp->DoHideNode(pGroup, TRUE))
return FALSE;
}
return TRUE;
}
/********************************************************************************************
> virtual BOOL WizOpStyleRefRecordHandler::HandleRecord(CXaraFileRecord* pRecord)
Author: Colin_Barfoot (Xara Group Ltd) <*****@*****.**>
Created: 27/06/97
Purpose: Handles the given TAG_WIZOP record.
Inputs: pCXaraFileRecord = ptr to record to handle
Returns: TRUE if handled successfuly
FALSE otherwise
Errors: If pCXaraFileRecord isn't a TAG_WIZOP record
********************************************************************************************/
BOOL WizOpStyleRefRecordHandler::HandleRecord(CXaraFileRecord* pRecord)
{
ERROR2IF(pRecord == NULL,FALSE,"pCXaraFileRecord is NULL");
ERROR2IF(pRecord->GetTag() != TAG_WIZOP_STYLEREF, FALSE, "I don't handle this tag type");
XFileRef StyleRecordRef;
BOOL Ok = pRecord->ReadINT32(&StyleRecordRef);
if (Ok)
{
WizOpStyle* const pStyle = GetImportedStyles().FindStyleFromRecordReference(StyleRecordRef);
if (pStyle != NULL)
{
// We managed to read it all OK so add a new StyleRefAttribute to the tree
StyleReferenceAttribute* const pNewAttribute = new StyleReferenceAttribute(*pStyle);
if (pNewAttribute != NULL)
{
Ok = InsertNode(pNewAttribute);
}
else
{
Ok = FALSE;
}
}
else
{
BaseCamelotFilter* const pFilter = GetBaseCamelotFilter();
ENSURE_NOT_NULL(pFilter);
pFilter->AppendWarning(_R(IDS_STYLE_NOT_FOUND));
}
}
return Ok;
}
BOOL PushTool::GetStatusLineText(String_256* pText, Spread*, DocCoord, ClickModifiers)
{
ERROR2IF(this==NULL, FALSE,"PushTool::GetStatusLineText() - this==NULL");
ERROR2IF(pText==NULL,FALSE,"PushTool::GetStatusLineText() - pText==NULL");
return pText->Load(_R(IDS_PUSHTOOL_STATUSHELP));
}
/********************************************************************************************
> BOOL OpMakeSegmentsLines::ProcessSegment(NodePath* pPath, INT32* Index, INT32 PrevIndex)
Author: Peter_Arnold (Xara Group Ltd) <*****@*****.**>
Created: 16/8/95
Inputs: pPath - points to the path to process
Index - index of the PT_BEZIERTO segment to change into lines
PrevIndex - index of the previois endpoint (other end of the segment to process)
Outputs: Index is changed to point to the new index of the end of the segment
Returns: TRUE/FALSE for success/failure
Purpose: Performs the make selected segments into lines operation.
Errors: -
SeeAlso: OpBaseConvertPathSegment::Do
********************************************************************************************/
BOOL OpMakeSegmentsLines::ProcessSegment(NodePath* pPath, INT32* Index, INT32 PrevIndex)
{
// Get the path pointers
PathVerb* Verbs;
PathFlags* Flags;
DocCoord* Coords;
pPath->InkPath.GetPathArrays(&Verbs, &Coords, &Flags);
// Quick check
ERROR2IF(((Verbs[*Index] & ~PT_CLOSEFIGURE) != PT_BEZIERTO), FALSE, "Unknown segment encountered");
ERROR2IF(((PrevIndex+3) != *Index), FALSE, "Not two points between segment start and end");
// BOOL ok = TRUE;
DocCoord EndCoord = Coords[*Index];
PathFlags EndFlags = Flags[*Index];
PathVerb NewEndVerb = Verbs[*Index];
NewEndVerb = (NewEndVerb == PT_BEZIERTO) ? PT_LINETO : PT_LINETO | PT_CLOSEFIGURE;
BOOL DoneOK = TRUE;
// Insert a line segment
if (DoneOK)
DoneOK = DoInsertPathElement(pPath, PrevIndex, EndCoord, EndFlags, NewEndVerb, FALSE);
// Remove the curve segment
if (DoneOK)
DoneOK = DoDeletePathSection(pPath, PrevIndex+2, 3, FALSE);
*Index = PrevIndex+1;
return DoneOK;
}
BOOL BfxPixelOpPseudo::SetBitmap(KernelBitmap * pKB, DWORD theCacheStateMask, DWORD theCacheValueMask,
BOOL theDefaultValue)
{
Base = NULL;
ERROR2IF( ((!pKB) || (pKB->ActualBitmap==NULL)) ,FALSE,"BfxALU can't find OIL bitmap");
ERROR3IF( (!(pKB->ActualBitmap->IsKindOf(CC_RUNTIME_CLASS(CWxBitmap)) )),"BfxALU Oil layer inconsistency");
BITMAPINFOHEADER * pBMI=&(((CWxBitmap *)(pKB->ActualBitmap))->BMInfo->bmiHeader);
BPP=pBMI->biBitCount;
ERROR2IF(BPP>8, FALSE,"Pseudo colour BMP not pseudo colour");
switch (BPP)
{
case 1 : Log2BPP=0; break;
case 2 : Log2BPP=1; break;
case 4 : Log2BPP=2; break;
case 8 : Log2BPP=3; break;
default:
ERROR2(FALSE, "Invalid BPP field");
}
if (!BfxPixelOp::SetBitmap(pKB, theCacheStateMask,theCacheValueMask, theDefaultValue)) return FALSE;
BPPMask = (BPP==32)?0xFFFFFFFF:(1<<BPP)-1;
XShift = 3-Log2BPP;
XMask = (1<<XShift)-1;
Size = (pBMI->biSizeImage<<3)>>Log2BPP;
return TRUE;
}
BOOL CXaraFileNodeBitmap::WritePreChildrenNative(BaseCamelotFilter *pFilter, NodeBitmap *pNodeBitmap)
{
ERROR2IF(pFilter==NULL, FALSE, "parameter pFilter==NULL");
ERROR2IF(pNodeBitmap==NULL, FALSE, "parameter pNodeBitmap==NULL");
return WriteNodeBitmap(pFilter, pNodeBitmap);
}
/********************************************************************************************
> BOOL PNGFilter::ReadFromFile(OILBitmap* pOilBitmap)
Author: Neville_Humphrys (Xara Group Ltd) <*****@*****.**>
Created: 26/4/96
Inputs: pOilBitmap pointer to the oil bitmap data to be filled in
Outputs: Will have filled in BMInfo pointer to the bitmap header to fill in
BMBytes pointer to the bitmap data to fill in
Purpose: Actually does the process of reading a bitmap from a file.
Inherited classes override this to read in different file formats.
Returns: TRUE if worked, FALSE if failed.
********************************************************************************************/
BOOL PNGFilter::ReadFromFile(OILBitmap* pOilBitmap)
{
ERROR2IF(pOilBitmap == NULL,FALSE,"PNGFilter::ReadFromFile null OilBitmap pointer");
// Try to import the bitmap as a PNG file.
CCLexFile *pImportFile = GetImportFile();
ERROR2IF(pImportFile==NULL,FALSE,"PNGFilter::ReadFromFile - No import file");
UINT32 ImportMsgId = GetImportMsgID();
String_64 ProgressString(ImportMsgId);
ProgressString = GetImportProgressString(pImportFile, ImportMsgId);
CWxBitmap* pWBitmap = (CWxBitmap*)pOilBitmap;
LPBITMAPINFO *pInfo = &(pWBitmap->BMInfo);
LPBYTE *pBytes = &(pWBitmap->BMBytes);
INT32 TransColour = -1;
// The PNG filter liked it very much and so use it, showing progress bar
if (!PNGUtil::ReadFromFile(pImportFile, pInfo, pBytes, &TransColour, &ProgressString))
return FALSE;
SetTransColour(TransColour);
UINT32 Bpp = pWBitmap->GetBPP();
if (TransColour != -1 && Bpp <= 8)
pOilBitmap->SetTransparencyIndex(TransColour);
SetLastBitmap(); // can only import one bitmap at the moment
return TRUE;
}
BOOL MouldTransform::TransformPath(Path* const pSource, Path* pDestin)
{
ERROR2IF(pSource==NULL,FALSE,"MouldTransform::TransformPath() called with a null source path");
ERROR2IF(pDestin==NULL,FALSE,"MouldTransform::TransformPath() called with a null source path");
return pMouldGeom->MouldPathToPath(pSource,pDestin);
}
BOOL EditTab::HandleMsg(DialogMsg* Msg)
{
TRACEUSER( "Neville", _T("HandleEditMsg\n"));
ERROR2IF(Msg == NULL,FALSE,"EditTab::Message null message received");
ERROR2IF(pPrefsDlg == NULL,FALSE,"EditTab::HandleMsg called with no dialog pointer");
BOOL ok = pPrefsDlg->TalkToPage(_R(IDD_OPTSTAB_EDIT)); // The edit page identifier
if (!ok)
return TRUE; // no page present = handled message
switch(Msg->DlgMsg)
{
case DIM_CREATE: // Initialise controls
GreyStatus = FALSE; // we are ungreyed by default
ok = InitSection();
if (!ok)
InformError();
break;
case DIM_SELECTION_CHANGED:
case DIM_LFT_BN_CLICKED:
case DIM_TEXT_CHANGED:
OptionsTabs::SetApplyNowState(TRUE);
break;
default:
break;
}
return TRUE;
}
BOOL UnitListComponent::ExportUserUnits(BaseCamelotFilter *pFilter)
{
#ifdef DO_EXPORT
ERROR2IF(pFilter == NULL,FALSE,"UnitListComponent::ExportUserUnits null pFilter");
ERROR2IF(pDocUnitList == NULL,FALSE,"UnitListComponent::ExportUserUnits called with no doc unit list pointer");
// Export any user defined units
Unit* pUnit = NULL;
BOOL ok = TRUE;
INT32 RecNum = 0;
pUnit = pDocUnitList->FindFirstUserUnit();
while (pUnit != NULL)
{
RecNum = ExportUnitDefinition(pFilter, pUnit);
if (RecNum == 0)
break;
pUnit = pDocUnitList->FindNextUserUnit(pUnit);
}
return ok;
#else
return TRUE;
#endif
}
INT32 UnitListComponent::GetWriteUnitReference(UnitType type, BaseCamelotFilter *pFilter)
{
#ifdef DO_EXPORT
ERROR2IF(pFilter == NULL,0L,"UnitListComponent::GetWriteUnitReference null pFilter");
ERROR2IF(pDocUnitList == NULL,FALSE,"UnitListComponent::GetWriteUnitReference called with no doc unit list pointer");
INT32 RecordNumber = 0L;
// Get a pointer to the unit
Unit* pUnit = NULL;
pUnit = pDocUnitList->FindUnit(type);
// Is the unit a user defined unit or one of the defaults?
if (pUnit->IsDefault())
{
// Its a default unit so convert the type into the default reference
RecordNumber = GetExportUnitType(type);
}
else
{
// See if we have saved the unit definition out by checking our has table
// Try and find the specified record number in our loaded user unit list
if (pExpUserUnitMap->find(pUnit)==pExpUserUnitMap->end())
{
// We have not seen this unit before so save out the definition
/*BOOL ok =*/ ExportUnitDefinition(pFilter, pUnit);
}
}
return RecordNumber;
#else
return 0;
#endif
}
BOOL OILPanose::Init(CDC *ptr)
{
ERROR2IF(ptr==NULL, FALSE, "Parameter ptr == NULL");
ERROR2IF(IsInitialised==TRUE, FALSE, "OILPanose::Init called when IsInitialised==TRUE.");
pMyCDC = ptr;
IsInitialised=TRUE;
return TRUE;
}
BOOL NativePrefsDlg::InitDialog ()
{
ERROR2IF ( mpParams == NULL, FALSE,
"NativePrefsDlg::InitDialog called after duff initialisation?!" );
//First, do we have a selection?
Application *pApp = GetApplication();
ERROR2IF(pApp == NULL, FALSE,"NativePrefsDlg::InitDialog - no application!");
SelRange *pRange = pApp->FindSelection();
ERROR2IF(pRange == NULL, FALSE,"NativePrefsDlg::InitDialog - no selection range!");
DocRect ClipRect = pRange->GetBoundingRect();
BOOL fThereIsASelection=!ClipRect.IsEmpty();
//Now, is there a selection?
if (fThereIsASelection)
{
// Yes. So ungrey both the buttons for selecting the nodes to export.
EnableGadget(_R(IDC_NATIVEOPTS_SELECT), TRUE);
EnableGadget(_R(IDC_NATIVEOPTS_DRAWING), TRUE);
//Now, which of those buttons should be selected?
switch ( mpParams->GetExportSel () )
{
case SELECTION:
// Choose the export pair of buttons.
SetLongGadgetValue(_R(IDC_NATIVEOPTS_SELECT), FALSE);
SetLongGadgetValue(_R(IDC_NATIVEOPTS_DRAWING), TRUE);
break;
default:
case DRAWING:
// Choose the export pair of buttons.
SetLongGadgetValue(_R(IDC_NATIVEOPTS_SELECT), TRUE);
SetLongGadgetValue(_R(IDC_NATIVEOPTS_DRAWING), FALSE);
break;
}
}
else
{
//No. So grey the SELECTION button and ungrey
//the DRAWING button
EnableGadget(_R(IDC_NATIVEOPTS_SELECT), FALSE);
EnableGadget(_R(IDC_NATIVEOPTS_DRAWING), TRUE);
// And we must select the DRAWING button for the export area controls.
SetLongGadgetValue(_R(IDC_NATIVEOPTS_SELECT), TRUE);
SetLongGadgetValue(_R(IDC_NATIVEOPTS_DRAWING), FALSE);
}
return TRUE;
}
Unit* UnitListComponent::GetReadUnitReference(INT32 UnitRef)
{
ERROR2IF(pDocUnitList == NULL,FALSE,"UnitListComponent::GetReadUnitReference called with no doc unit list pointer");
TRACEUSER( "Neville", _T("GetReadUnitReference for ref %d\n"), UnitRef);
// First check to see if the unit refers to any of the built in units.
// These will have negative record numbers
Unit *pUnit = NULL;
if (UnitRef <= 0)
{
UnitType type = GetUnitType(UnitRef);
// If we succesfully converted the unit into a type then find the unit
if (type != NOTYPE)
{
// Find this unit type in the current document list
pUnit = pDocUnitList->FindUnit(type);
}
else
ERROR2(NULL,"BitmapListComponent::GetReadBitmapReference negative UnitRef is unknown");
}
else
{
// Try and find the specified record number in our loaded user unit list
CMapLongToPtr::const_iterator iter = pImpUserUnitMap->find( UnitRef );
/*BOOL ok =*/ pImpUserUnitMap->end();/* != iter;*/
pUnit = (Unit *)iter->second;
// if ok then pUnit will be the pointer to the required unit
// so return this.
// if not ok then pUnit will still be null.
// If not found then this is a problem as a bitmap must have been defined before its being
// referenced
if (pUnit == NULL)
{
// If we have a pFilter then ask the default warning handle to append our message
if (pCamFilter)
{
if (!WarnedBefore)
{
pCamFilter->AppendWarning(_R(IDS_NATIVE_UNITSWARNING));
WarnedBefore = TRUE;
}
// Now use a default unit instead, we will use the default page display units
UnitType PageUnits = pDocUnitList->GetPageUnits(); // The units used to display page measurements
pUnit = pDocUnitList->FindUnit(PageUnits);
}
else
ERROR2IF(pUnit == NULL,NULL,"BitmapListComponent::GetReadUnitReference UnitRef cannot be found");
}
}
return pUnit;
}
// FIXED16 version
BOOL PrintComponent::OutputValue(UINT32 Token,FIXED16 Value)
{
ERROR2IF(pExportDC == NULL,FALSE,"NULL export DC in PrintComponent::OutputValue()");
ERROR2IF(Token >= PCTOKEN_UNKNOWN,FALSE,"Token out of range");
BOOL ok = TRUE;
if (ok) ok = pExportDC->OutputToken(PCTokenStr[Token]);
if (ok) ok = pExportDC->OutputReal(Value.MakeDouble());
if (ok) ok = pExportDC->OutputNewLine();
return ok;
}
KernelBitmap* NodeAnimatingBitmap::GetBitmap()
{
KernelBitmap* pBitmap = m_pBmpRefs[m_nCurrentBmp].GetBitmap();
if (pBitmap && pBitmap->HasBeenDeleted())
{
// If necessary (due to the crud that is the bitmap system) use the default bitmap instead.
ERROR2IF(pBitmap->GetParentBitmapList() == NULL, NULL, "Deleted bitmap has no parent list");
pBitmap = pBitmap->GetParentBitmapList()->FindDefaultBitmap();
// There should always be a default bitmap in the list
ERROR2IF(pBitmap == NULL, 0L, "Couldn't find the default bitmap");
}
return pBitmap;
}
BOOL OpBackground::GetPageColour(Spread *pSpread, KernelBitmap **ppOutBitmap,
DocColour **ppOutColour)
{
ERROR2IF(pSpread == NULL,FALSE,"OpBackground::GetPageColour Bad params error!");
ERROR2IF(ppOutBitmap == NULL || ppOutColour == NULL,FALSE,"OpBackground::GetPageColour Bad params error!");
// Search for our special page background layer
Layer* pFoundLayer = pSpread->FindFirstPageBackgroundLayer();
if (pFoundLayer == NULL)
return FALSE;
// search for our page node
NodeRegularShape *pNode = DoFindPageRectangle(pSpread, pFoundLayer);
if (!pNode)
return FALSE;
// find the fill attribute applied to the page
NodeAttribute *pAppliedAttr = NULL;
pNode->FindAppliedAttribute(CC_RUNTIME_CLASS(AttrFillGeometry),&pAppliedAttr);
if (pAppliedAttr != NULL)
{
if (IS_A(pAppliedAttr, AttrFlatColourFill)) // flat colour fill?
{
// get the colour attribute
ColourFillAttribute *pColAttr = (ColourFillAttribute *)(pAppliedAttr->GetAttributeValue());
// set the colour pointer to the doc colour, and the bitmap pointer to NULL
*ppOutBitmap = NULL;
*ppOutColour = pColAttr->GetStartColour();
}
else if (IS_A(pAppliedAttr, AttrBitmapColourFill)) // bitmap fill
{
// set the colour pointer to NULL, and the bitmap pointer to the kernel bitmap
*ppOutBitmap = ((AttrFillGeometry *)pAppliedAttr)->GetBitmap();
*ppOutColour = NULL;
}
else
return FALSE;
}
else
return FALSE;
return TRUE;
}
BOOL RegularShapeRecordHandler::SetSecondaryCurvature(NodeRegularShape *pShape, const double & SecondaryCurvature)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetStellCurveToStell(SecondaryCurvature);
return TRUE;
}
BOOL PlugInsContextMenu::BuildMenu(KernelBitmap * pBitmap, Document * pDocument,
ContextMenu * pContextMenu, MenuItem * pMainRoot,
BOOL AddSeparator, BOOL UseUndoable)
{
ERROR2IF(pContextMenu == NULL,FALSE,"PlugInsContextMenu::BuildMenu null ContextMenu to add to");
BOOL ok = TRUE;
// As we are just about to invoke UI, check that the plug-in manager has its list
// of available plug-ins otherwise, go and get it now as we are just about to need it.
// PlugInManager* pManager = GetApplication()->GetPlugInManager();
// if (pManager)
// pManager->CheckHaveDetailsOnPlugIns();
//#ifndef WEBSTER
//#ifndef EXCLUDE_BFX
// ok = ok && BfxPlugInContextMenu::BuildMenu(pBitmap, pDocument, pContextMenu, pMainRoot, TRUE, UseUndoable);
//#endif
//#endif // WEBSTER
// ok = ok && PhotoShopContextMenu::BuildMenu(pBitmap, pDocument, pContextMenu, pMainRoot, FALSE, UseUndoable);
ok = ok && BfxPlugInContextMenu::BuildMenu(pBitmap, pDocument, pContextMenu, pMainRoot, TRUE, UseUndoable);
return ok;
}
BOOL GuidesPropertiesTab::BuildGuidelineList(Layer* pLayer)
{
GuidelineList.DeleteAll();
pPropertiesDlg->DeleteAllValues(_R(IDC_GUIDETAB_GUIDELINELIST));
ERROR2IF(pLayer == NULL, FALSE,"pLayer is NULL");
Node* pNode = pLayer->FindFirstChild(CC_RUNTIME_CLASS(NodeGuideline));
while (pNode != NULL)
{
NodeGuideline* pGuideline = (NodeGuideline*) pNode;
if (pGuideline->GetType() == GuideType)
{
GuidelineListItem* pItem = (GuidelineListItem*)GuidelineList.GetHead();
while (pItem != NULL && (pItem->pGuideline->GetOrdinate() < pGuideline->GetOrdinate()))
pItem = (GuidelineListItem*)GuidelineList.GetNext(pItem);
GuidelineListItem* pNewItem = new GuidelineListItem(pGuideline);
if (pNewItem != NULL)
{
if (pItem == NULL)
GuidelineList.AddTail(pNewItem);
else
GuidelineList.InsertBefore(pItem,pNewItem);
}
}
pNode = pNode->FindNext(CC_RUNTIME_CLASS(NodeGuideline));
}
return TRUE;
}
BOOL PluginOILFilter::GetExportFile(PathName* pPath, CCLexFile** ppNewFile)
{
ERROR2IF(ppNewFile == NULL, FALSE,"PluginOILFilter::GetExportFile no newfile pointer");
*ppNewFile = NULL;
// Here we should run the plugin asynchronously with the following options
// -e -g -f <filename> -x <xmlfilename>
// The xmlfilename is a path to a user and filter specific file
// e.g. ~/.XaraLX/filtername.xml
// Create a CCLexFile derived object that sends its data to stdin
// Check stderr during the Xar export and abort if an error is reported
// However, this will not be trivial so intsead we will just create a
// CCDiskFile attached to a temporary filename and run the export process
// in DoExport instead
// Generate a temporary file name
m_TempXarFile.SetPathName(_T("/tmp/xpftemp.xar"));
CCDiskFile* pFile = new CCDiskFile();
if (pFile)
{
if (pFile->open(m_TempXarFile, ios::out | ios::binary | ios::trunc))
{
*ppNewFile = pFile;
return(TRUE);
}
delete pFile;
}
return(FALSE);
}
BOOL RegularShapeRecordHandler::SetNumberOfSides(NodeRegularShape *pShape, const INT32 & NumberOfSides)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetNumSides(NumberOfSides);
return TRUE;
}
BOOL RegularShapeRecordHandler::SetPrimaryCurvature(NodeRegularShape *pShape, const double & PrimaryCurvature)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetPrimaryCurveToPrimary(PrimaryCurvature);
return TRUE;
}
BOOL RegularShapeRecordHandler::SetIsStellated(NodeRegularShape *pShape, const BOOL & IsStellated)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetStellated(IsStellated);
return TRUE;
}
BOOL RegularShapeRecordHandler::SetIsCircular(NodeRegularShape *pShape, const BOOL & IsCircular)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetCircular(IsCircular);
return TRUE;
}
BOOL RegularShapeRecordHandler::SetStellationOffset(NodeRegularShape *pShape, const double & StellationOffset)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetStellationRatio(StellationOffset);
return TRUE;
}
BOOL RegularShapeRecordHandler::SetStellationRadius(NodeRegularShape *pShape, const double & StellationRadius)
{
ERROR2IF(pShape==NULL, FALSE, "parameter pShape == NULL");
pShape->SetStellRadiusToPrimary(StellationRadius);
return TRUE;
}
