Example #1
0
//
// PCI device probe & initialization function
//
static INT __devinit   rt2860_probe(
    IN  struct pci_dev              *pci_dev, 
    IN  const struct pci_device_id  *pci_id)
{
	PRTMP_ADAPTER 		pAd = (PRTMP_ADAPTER)NULL;
	struct  net_device		*net_dev;
	PVOID				handle;
	PSTRING				print_name;
	ULONG				csr_addr;
	INT rv = 0;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
#ifdef PRE_ASSIGN_MAC_ADDR	
	USHORT  Addr01,Addr23,Addr45 ;
#endif // PRE_ASSIGN_MAC_ADDR //

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));

//PCIDevInit==============================================
	// wake up and enable device
	if ((rv = pci_enable_device(pci_dev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_dev ? pci_name(pci_dev) : "rt2860";
#else
	print_name = pci_dev ? pci_dev->slot_name : "rt2860";
#endif // LINUX_VERSION_CODE //

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	// map physical address to virtual address for accessing register
	csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
	}

	// Set DMA master
	pci_set_master(pci_dev);


//RtmpDevInit==============================================
	// Allocate RTMP_ADAPTER adapter structure
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}

	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pci_dev;
	
	rv = RTMPAllocAdapterBlock(handle, &pAd);	//shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER"
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;
	// Here are the RTMP_ADAPTER structure with pci-bus specific parameters.
	pAd->CSRBaseAddress = (PUCHAR)csr_addr;
	DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, csr_addr));
		
	RTMPInitPCIeDevice(pci_dev, pAd);
	
//NetDevInit==============================================
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	// Here are the net_device structure with pci-bus specific parameters.
	net_dev->irq = pci_dev->irq;		// Interrupt IRQ number
	net_dev->base_addr = csr_addr;		// Save CSR virtual address and irq to device structure
	pci_set_drvdata(pci_dev, net_dev);	// Set driver data
	
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
/* for supporting Network Manager */
	/* Set the sysfs physical device reference for the network logical device
	  * if set prior to registration will cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
#endif
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //

//All done, it's time to register the net device to linux kernel.
	// Register this device
#ifdef RT_CFG80211_SUPPORT
	pAd->pCfgDev = &(pci_dev->dev);
	pAd->CFG80211_Register = CFG80211_Register;
#endif // RT_CFG80211_SUPPORT //

	rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;

#ifdef CONFIG_STA_SUPPORT
	pAd->StaCfg.OriDevType = net_dev->type;
#endif // CONFIG_STA_SUPPORT //

#ifdef KTHREAD_SUPPORT
	init_waitqueue_head(&pAd->cmdQTask.kthread_q);
#endif // KTHREAD_SUPPORT //
	//NICReadEEPROMParameters(pAd, "");

#ifdef CREDENTIAL_STORE
	NdisAllocateSpinLock(&pAd->StaCtIf.Lock);
#endif /* CREDENTIAL_STORE */
	
#ifdef PRE_ASSIGN_MAC_ADDR
	RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
	RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
	RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);

	pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
	pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
	pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
	pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
	pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
	pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8);

		// Set up the Mac address
	RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->PermanentAddress[0]);
#endif // PRE_ASSIGN_MAC_ADDR //

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0; // probe ok


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); 
	
err_out_free_res:
	pci_release_regions(pci_dev);
	
err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV; /* probe fail */
}
Example #2
0
static int rt2870_probe(
    IN struct usb_interface *intf,
    IN struct usb_device *usb_dev,
    IN const USB_DEVICE_ID *dev_id,
    IN RTMP_ADAPTER **ppAd)
{
    struct  net_device		*net_dev = NULL;
    RTMP_ADAPTER       	*pAd = (RTMP_ADAPTER *) NULL;
    INT                 		status, rv;
    PVOID				handle;
    RTMP_OS_NETDEV_OP_HOOK	netDevHook;


    DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));

    // Check chipset vendor/product ID
    //if (RT28XXChipsetCheck(_dev_p) == FALSE)
    //	goto err_out;

//RtmpDevInit=============================================
    // Allocate RTMP_ADAPTER adapter structure
    handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
    if (handle == NULL)
    {
        printk("rt2870_probe(): Allocate memory for os handle failed!\n");
        return -ENOMEM;
    }
    ((POS_COOKIE)handle)->pUsb_Dev = usb_dev;

    rv = RTMPAllocAdapterBlock(handle, &pAd);
    if (rv != NDIS_STATUS_SUCCESS)
    {
        kfree(handle);
        goto err_out;
    }

//USBDevInit==============================================
    if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
        goto err_out_free_radev;

    RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB);

//NetDevInit==============================================
    net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
    if (net_dev == NULL)
        goto err_out_free_radev;

    // Here are the net_device structure with usb specific parameters.
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
    /* for supporting Network Manager.
      * Set the sysfs physical device reference for the network logical device if set prior to registration will
      * cause a symlink during initialization.
     */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
    SET_NETDEV_DEV(net_dev, &(usb_dev->dev));
#endif
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
    pAd->StaCfg.OriDevType = net_dev->type;
#endif // CONFIG_STA_SUPPORT //

//All done, it's time to register the net device to linux kernel.
    // Register this device
    status = RtmpOSNetDevAttach(net_dev, &netDevHook);
    if (status != 0)
        goto err_out_free_netdev;

#ifdef KTHREAD_SUPPORT
    init_waitqueue_head(&pAd->mlmeTask.kthread_q);
    init_waitqueue_head(&pAd->timerTask.kthread_q);
    init_waitqueue_head(&pAd->cmdQTask.kthread_q);
#endif

#ifdef RT_CFG80211_SUPPORT
    pAd->pCfgDev = &(usb_dev->dev);
#endif // RT_CFG80211_SUPPORT //

    *ppAd = pAd;

#ifdef INF_AMAZON_PPA
    pAd->pDirectpathCb = (PPA_DIRECTPATH_CB *) kmalloc (sizeof(PPA_DIRECTPATH_CB), GFP_ATOMIC);
#endif // INF_AMAZON_PPA //

    DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

    return 0;

    /* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
    RtmpOSNetDevFree(net_dev);

err_out_free_radev:
    RTMPFreeAdapter(pAd);

err_out:
    *ppAd = NULL;

    return -1;

}
Example #3
0
/*
	PCI device probe & initialization function
*/
static int DEVINIT rt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
	void *pAd = NULL, *handle;
	struct net_device *net_dev;
	const char *print_name;
	unsigned long csr_addr;
	int rv = 0;
	RTMP_OS_NETDEV_OP_HOOK netDevHook;
	unsigned long OpMode;

	DBGPRINT(RT_DEBUG_TRACE, ("===> %s()\n", __FUNCTION__));

/*PCIDevInit============================================== */
	/* wake up and enable device */
	if ((rv = pci_enable_device(pdev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_name(pdev);
#else
	print_name = pdev->slot_name;
#endif /* LINUX_VERSION_CODE */

	if ((rv = pci_request_regions(pdev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	/* map physical address to virtual address for accessing register */
	csr_addr = (unsigned long) ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pdev, 0), (ULONG)pci_resource_start(pdev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pdev, 0), (ULONG)csr_addr, pdev->irq));
	}

	/* Set DMA master */
	pci_set_master(pdev);

	/* Allocate RTMP_ADAPTER adapter structure */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pdev;

#ifdef OS_ABL_FUNC_SUPPORT
{
	RTMP_PCI_CONFIG PciConfig;
	PciConfig.ConfigVendorID = PCI_VENDOR_ID;
	/* get DRIVER operations */
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, NULL, &PciConfig, NULL);
}
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);	/* we may need the pdev for allocate structure of "RTMP_ADAPTER" */
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;

#ifdef MULTI_INF_SUPPORT
	if (pAdGlobalList[0] == NULL)
		pAdGlobalList[0] = pAd;
	else if (pAdGlobalList[1] == NULL) 	
		pAdGlobalList[1] = pAd;
	else
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): pAdGlobalList assign Error !\n", __FUNCTION__));	
#endif /* MULTI_INF_SUPPORT */

	RTMP_DRIVER_PCI_CSR_SET(pAd, csr_addr);

	RTMP_DRIVER_PCIE_INIT(pAd, pdev);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with pci-bus specific parameters. */
	net_dev->irq = pdev->irq;		/* Interrupt IRQ number */
	net_dev->base_addr = csr_addr;		/* Save CSR virtual address and irq to device structure */
	pci_set_drvdata(pdev, net_dev);	/* Set driver data */
	

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(pdev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, pdev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(pdev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	rv = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;


#ifdef PRE_ASSIGN_MAC_ADDR
{
	UCHAR mac_addr[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &mac_addr[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
				__FUNCTION__, mac_addr[0], mac_addr[1],
				mac_addr[2], mac_addr[3],
				mac_addr[4], mac_addr[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &mac_addr[0], NULL);
}
#endif /* PRE_ASSIGN_MAC_ADDR */

	DBGPRINT(RT_DEBUG_TRACE, ("<=== %s()\n", __FUNCTION__));

	return 0; /* probe ok */


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); 
	
err_out_free_res:
	pci_release_regions(pdev);
	
err_out:
	pci_disable_device(pdev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== %s() failed with rv = %d!\n",
				__FUNCTION__, rv));

	return -ENODEV; /* probe fail */
}
Example #4
0
static int __devinit rt2870_probe(IN struct usb_interface *intf,
				  IN struct usb_device *usb_dev,
				  IN const struct usb_device_id *dev_id,
				  struct rt_rtmp_adapter **ppAd)
{
	struct net_device *net_dev = NULL;
	struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)NULL;
	int status, rv;
	void *handle;
	struct rt_rtmp_os_netdev_op_hook netDevHook;

	DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));

	/* Check chipset vendor/product ID */
	/*if (RT28XXChipsetCheck(_dev_p) == FALSE) */
	/*      goto err_out; */

/*RtmpDevInit============================================= */
	/* Allocate struct rt_rtmp_adapter adapter structure */
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL) {
		printk
		    ("rt2870_probe(): Allocate memory for os handle failed!\n");
		return -ENOMEM;
	}
	((struct os_cookie *)handle)->pUsb_Dev = usb_dev;

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS) {
		kfree(handle);
		goto err_out;
	}
/*USBDevInit============================================== */
	if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
		goto err_out_free_radev;

	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;

	/* Here are the net_device structure with usb specific parameters. */
	/* for supporting Network Manager.
	 * Set the sysfs physical device reference for the network logical device if set prior to registration will
	 * cause a symlink during initialization.
	 */
	SET_NETDEV_DEV(net_dev, &(usb_dev->dev));

	pAd->StaCfg.OriDevType = net_dev->type;

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
	status = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (status != 0)
		goto err_out_free_netdev;

#ifdef KTHREAD_SUPPORT
	init_waitqueue_head(&pAd->mlmeTask.kthread_q);
	init_waitqueue_head(&pAd->timerTask.kthread_q);
	init_waitqueue_head(&pAd->cmdQTask.kthread_q);
#endif

	*ppAd = pAd;

	DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

	return 0;

	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);

err_out_free_radev:
	RTMPFreeAdapter(pAd);

err_out:
	*ppAd = NULL;

	return -1;

}
Example #5
0
int rt2880_module_init(VOID)
{
	struct  net_device		*net_dev = NULL;
	ULONG				csr_addr;
	INT					rv;
	PVOID				*handle = NULL;
	RTMP_ADAPTER			*pAd = NULL;
	unsigned int			dev_irq;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
	

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2880_probe\n"));	


//RtmpRaBusInit============================================
	// map physical address to virtual address for accessing register
	csr_addr = (unsigned long)RTMP_MAC_CSR_ADDR;
	dev_irq = RTMP_MAC_IRQ_NUM;
	

//RtmpDevInit==============================================
	// Allocate RTMP_ADAPTER adapter structure
	handle = kmalloc(sizeof(struct os_cookie) , GFP_KERNEL);
	if (!handle)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Allocate memory for os_cookie failed!\n"));
		goto err_out;
	}

	NdisZeroMemory(handle, sizeof(struct os_cookie));

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT(RT_DEBUG_ERROR, (" RTMPAllocAdapterBlock !=  NDIS_STATUS_SUCCESS\n"));
		kfree(handle);
		
		goto err_out;
	}
	// Here are the RTMP_ADAPTER structure with rbus-bus specific parameters.
	pAd->CSRBaseAddress = (PUCHAR)csr_addr;
	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_RBUS);


//NetDevInit==============================================
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;

	// Here are the net_device structure with pci-bus specific parameters.
	net_dev->irq = dev_irq;			// Interrupt IRQ number
	net_dev->base_addr = csr_addr;		// Save CSR virtual address and irq to device structure
	((POS_COOKIE)handle)->pci_dev = (struct pci_dev *)net_dev;

#ifdef CONFIG_STA_SUPPORT
    pAd->StaCfg.OriDevType = net_dev->type;
#endif // CONFIG_STA_SUPPORT //


	
//All done, it's time to register the net device to kernel.
	// Register this device
	rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (rv)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("failed to call RtmpOSNetDevAttach(), rv=%d!\n", rv));
		goto err_out_free_netdev;
	}

	// due to we didn't have any hook point when do module remove, we use this static as our hook point.
	rt2880_dev = net_dev;

	wl_proc_init();

	DBGPRINT(RT_DEBUG_TRACE, ("%s: at CSR addr 0x%1lx, IRQ %d. \n", net_dev->name, (ULONG)csr_addr, net_dev->irq));

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2880_probe\n"));

	return 0;

err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);

err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);
		
err_out:
	return -ENODEV;
	
}
Example #6
0
static INT __devinit   rt2860_probe(
    IN  struct pci_dev              *pci_dev, 
    IN  const struct pci_device_id  *pci_id)
{
	PRTMP_ADAPTER 		pAd = (PRTMP_ADAPTER)NULL;
	struct  net_device		*net_dev;
	PVOID				handle;
	PSTRING				print_name;
	ULONG				csr_addr;
	INT rv = 0;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
#ifdef RT30xx
	static UCHAR MemReset=0;
#endif // RT3090 //
	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));

//PCIDevInit==============================================
	// wake up and enable device
	if ((rv = pci_enable_device(pci_dev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_dev ? (PSTRING)pci_name(pci_dev) : "rt2860";
#else
	print_name = pci_dev ? pci_dev->slot_name : "rt2860";
#endif // LINUX_VERSION_CODE //

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	// map physical address to virtual address for accessing register
	csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
	}

	// Set DMA master
	pci_set_master(pci_dev);


//RtmpDevInit==============================================
	// Allocate RTMP_ADAPTER adapter structure
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}

	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pci_dev;
	
	rv = RTMPAllocAdapterBlock(handle, &pAd);	//shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER"
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;
	// Here are the RTMP_ADAPTER structure with pci-bus specific parameters.
	pAd->CSRBaseAddress = (PUCHAR)csr_addr;
	DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, csr_addr));
#ifdef RT30xx
	if (MemReset==0)
	{
		UINT32 MacCsr0 = 0;
		UCHAR Index = 0;
		BOOLEAN NeedResetChips=FALSE;
		MemReset=1;
		do 
		{
			RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);

			if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
				break;
		
			RTMPusecDelay(10);
		} while (Index++ < 100);
		if (((MacCsr0&0xFFFF0000)==0x3090) ||((MacCsr0&0xFFFF0000)==0x3390))
		{
			if ((MacCsr0&0x0000FFFF) < 0x3213)
			NeedResetChips=TRUE;
		}
		
		if (((MacCsr0&0xFFFF0000)==0x3071) )
		{
			if ((MacCsr0&0x0000FFFF) < 0x21C)
			NeedResetChips=TRUE;
		}
		
		if (NeedResetChips==TRUE)
		{
	  		struct proc_dir_entry *tsarm_proc;
	  		
			RTMP_IO_READ32(pAd, 0x5C0,&MacCsr0);
			MacCsr0|=0x400000;
			RTMP_IO_WRITE32(pAd, 0x5C0,MacCsr0);
			OS_WAIT(1000);
		
	  		/* Send reset PCI device event */
	  		//RTMPSendWirelessEvent(pAd, IW_RESETPCI_EVENT_FLAG, NULL, BSS0, 0);
	  
	  		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
			tsarm_proc = create_proc_entry("TwoM", 0, NULL);
			if (tsarm_proc) {
				tsarm_proc->read_proc = twoPortM_read_proc;
				tsarm_proc->write_proc = twoPortM_write_proc;
			}
	  		goto err_out_free_radev;
		}
	}
#endif // RT3090 //
	RTMPInitPCIeDevice(pci_dev, pAd);
	
//NetDevInit==============================================
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	// Here are the net_device structure with pci-bus specific parameters.
	net_dev->irq = pci_dev->irq;		// Interrupt IRQ number
	net_dev->base_addr = csr_addr;		// Save CSR virtual address and irq to device structure
	pci_set_drvdata(pci_dev, net_dev);	// Set driver data
	

//All done, it's time to register the net device to linux kernel.
	// Register this device
#ifdef RT_CFG80211_SUPPORT
	pAd->pCfgDev = &(pci_dev->dev);
	pAd->CFG80211_Register = CFG80211_Register;
#endif // RT_CFG80211_SUPPORT //

	rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;


#ifdef KTHREAD_SUPPORT
	init_waitqueue_head(&pAd->cmdQTask.kthread_q);
#ifdef WSC_INCLUDED
	init_waitqueue_head(&pAd->wscTask.kthread_q);
#endif
#endif // KTHREAD_SUPPORT //

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0; // probe ok


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); 
	
err_out_free_res:
	pci_release_regions(pci_dev);
	
err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV; /* probe fail */
}
Example #7
0
static int rt2870_probe(
	IN struct usb_interface *intf,
	IN struct usb_device *usb_dev,
	IN const USB_DEVICE_ID *dev_id,
	IN VOID **ppAd)
{
	struct  net_device		*net_dev = NULL;
	VOID       				*pAd = (VOID *) NULL;
	INT                 	status, rv;
	PVOID					handle;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
	ULONG					OpMode;
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
/*	INT 		pm_usage_cnt; */
	INT		 res =1 ; 
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */	

	

	DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));
	
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND

        res = usb_autopm_get_interface(intf);
	if (res)
	{
			DBGPRINT(RT_DEBUG_ERROR, ("rt2870_probe autopm_resume fail ------\n"));
		     return -EIO;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
	atomic_set(&intf->pm_usage_cnt, 1);
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", atomic_read(&intf->pm_usage_cnt));
#else
         intf->pm_usage_cnt = 1;
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", intf->pm_usage_cnt);
#endif
	

#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */



/*RtmpDevInit============================================= */
	/* Allocate RTMP_ADAPTER adapter structure */
/*	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		printk("rt2870_probe(): Allocate memory for os handle failed!\n");
		return -ENOMEM;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pUsb_Dev = usb_dev;

#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
	((POS_COOKIE)handle)->intf = intf;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */



	/* set/get operators to/from DRIVER module */
#ifdef OS_ABL_FUNC_SUPPORT
	/* get DRIVER operations */
	RtmpNetOpsInit(pRtmpDrvNetOps);
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, pRtmpDrvNetOps, NULL, NULL);
	RtmpNetOpsSet(pRtmpDrvNetOps);
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS) 
	{
/*		kfree(handle); */
		os_free_mem(NULL, handle);
		goto err_out;
	}

/*USBDevInit============================================== */
	if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
		goto err_out_free_radev;

	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB);
	
/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with usb specific parameters. */
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
	/* for supporting Network Manager.
	  * Set the sysfs physical device reference for the network logical device if set prior to registration will 
	  * cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(usb_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
/*    pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#endif /* CONFIG_STA_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(usb_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, usb_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(usb_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	status = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (status != 0)
		goto err_out_free_netdev;

/*#ifdef KTHREAD_SUPPORT */

	*ppAd = pAd;

#ifdef INF_PPA_SUPPORT
/*	pAd->pDirectpathCb = (PPA_DIRECTPATH_CB *) kmalloc (sizeof(PPA_DIRECTPATH_CB), GFP_ATOMIC); */
/*	os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB)); */
	RTMP_DRIVER_INF_PPA_INIT(pAd);
#endif /* INF_PPA_SUPPORT */

#ifdef PRE_ASSIGN_MAC_ADDR
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__, PermanentAddress[0], PermanentAddress[1],PermanentAddress[2],PermanentAddress[3],PermanentAddress[4],PermanentAddress[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
#endif /* PRE_ASSIGN_MAC_ADDR */

#ifdef CONFIG_HAS_EARLYSUSPEND
	RTMP_DRIVER_ADAPTER_REGISTER_EARLYSUSPEND(pAd);
#endif

#ifdef EXT_BUILD_CHANNEL_LIST
	RTMP_DRIVER_SET_PRECONFIG_VALUE(pAd);
#endif /* EXT_BUILD_CHANNEL_LIST */

	DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

	return 0;

	/* --------------------------- ERROR HANDLE --------------------------- */	
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	RTMPFreeAdapter(pAd);
	
err_out:
	*ppAd = NULL;

	return -1;
	
}
static int __devinit rt2860_probe(IN struct pci_dev *pci_dev,
				  IN const struct pci_device_id *pci_id)
{
	struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)NULL;
	struct net_device *net_dev;
	void *handle;
	char *print_name;
	unsigned long csr_addr;
	int rv = 0;
	struct rt_rtmp_os_netdev_op_hook netDevHook;

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));

/*PCIDevInit============================================== */
	/* wake up and enable device */
	if ((rv = pci_enable_device(pci_dev)) != 0) {
		DBGPRINT(RT_DEBUG_ERROR,
			 ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

	print_name = (char *)pci_name(pci_dev);

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0) {
		DBGPRINT(RT_DEBUG_ERROR,
			 ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	/* map physical address to virtual address for accessing register */
	csr_addr =
	    (unsigned long)ioremap(pci_resource_start(pci_dev, 0),
				   pci_resource_len(pci_dev, 0));
	if (!csr_addr) {
		DBGPRINT(RT_DEBUG_ERROR,
			 ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
			  print_name, (unsigned long)pci_resource_len(pci_dev, 0),
			  (unsigned long)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	} else {
		DBGPRINT(RT_DEBUG_TRACE,
			 ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n", print_name,
			  (unsigned long)pci_resource_start(pci_dev, 0),
			  (unsigned long)csr_addr, pci_dev->irq));
	}

	/* Set DMA master */
	pci_set_master(pci_dev);

/*RtmpDevInit============================================== */
	/* Allocate struct rt_rtmp_adapter adapter structure */
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL) {
		DBGPRINT(RT_DEBUG_ERROR,
			 ("%s(): Allocate memory for os handle failed!\n",
			  __func__));
		goto err_out_iounmap;
	}

	((struct os_cookie *)handle)->pci_dev = pci_dev;

	rv = RTMPAllocAdapterBlock(handle, &pAd);	/*shiang: we may need the pci_dev for allocate structure of "struct rt_rtmp_adapter" */
	if (rv != NDIS_STATUS_SUCCESS)
		goto err_out_iounmap;
	/* Here are the struct rt_rtmp_adapter structure with pci-bus specific parameters. */
	pAd->CSRBaseAddress = (u8 *)csr_addr;
	DBGPRINT(RT_DEBUG_ERROR,
		 ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n",
		  (unsigned long)pAd->CSRBaseAddress, csr_addr));
	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_PCI);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;

	/* Here are the net_device structure with pci-bus specific parameters. */
	net_dev->irq = pci_dev->irq;	/* Interrupt IRQ number */
	net_dev->base_addr = csr_addr;	/* Save CSR virtual address and irq to device structure */
	pci_set_drvdata(pci_dev, net_dev);	/* Set driver data */

/* for supporting Network Manager */
	/* Set the sysfs physical device reference for the network logical device
	 * if set prior to registration will cause a symlink during initialization.
	 */
	SET_NETDEV_DEV(net_dev, &(pci_dev->dev));

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
	rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;

	pAd->StaCfg.OriDevType = net_dev->type;
	RTMPInitPCIeDevice(pci_dev, pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0;		/* probe ok */

	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);

err_out_free_radev:
	/* free struct rt_rtmp_adapter strcuture and os_cookie */
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0),
			   pci_resource_len(pci_dev, 0));

err_out_free_res:
	pci_release_regions(pci_dev);

err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR,
		 ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV;		/* probe fail */
}
Example #9
0
INT __devinit   rt28xx_probe(
    IN  void *_dev_p,
    IN  void *_dev_id_p,
	IN  UINT argc,
	OUT PRTMP_ADAPTER *ppAd)
{
    struct  net_device	*net_dev;
    PRTMP_ADAPTER       pAd = (PRTMP_ADAPTER) NULL;
    INT                 status;
	PVOID				handle;
#ifdef RT2860
	struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
#endif
#ifdef RT2870
	struct usb_interface *intf = (struct usb_interface *)_dev_p;
	struct usb_device *dev_p = interface_to_usbdev(intf);

	dev_p = usb_get_dev(dev_p);
#endif 

    DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));

    net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
    if (net_dev == NULL)
    {
        printk("alloc_netdev failed\n");

        goto err_out;
    }

	netif_stop_queue(net_dev);



    SET_NETDEV_DEV(net_dev, &(dev_p->dev));

	
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL)
		goto err_out_free_netdev;;
	RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p);

	status = RTMPAllocAdapterBlock(handle, &pAd);
	if (status != NDIS_STATUS_SUCCESS)
		goto err_out_free_netdev;

	net_dev->ml_priv = (PVOID)pAd;
    pAd->net_dev = net_dev; 

	RT28XXNetDevInit(_dev_p, net_dev, pAd);

    pAd->StaCfg.OriDevType = net_dev->type;

	
	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
		goto err_out_unmap;

	pAd->OpMode = OPMODE_STA;

	
	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
		goto err_out_unmap;

    
    status = register_netdev(net_dev);
    if (status)
        goto err_out_unmap;

    
	RT28XX_DRVDATA_SET(_dev_p);

	*ppAd = pAd;
    return 0; 


	
err_out_unmap:
	RTMPFreeAdapter(pAd);
	RT28XX_UNMAP();

err_out_free_netdev:
	free_netdev(net_dev);

err_out:
	RT28XX_PUT_DEVICE(dev_p);

	return -ENODEV; 
} 
static INT __devinit   rt2860_probe(
    IN  struct pci_dev              *pci_dev, 
    IN  const struct pci_device_id  *pci_id)
{
	VOID 				*pAd = NULL;
	struct  net_device	*net_dev;
	PVOID				handle;
	PSTRING				print_name;
	ULONG				csr_addr;
	INT rv = 0;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
	ULONG					OpMode;

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));

/*PCIDevInit============================================== */
	/* wake up and enable device */
	if ((rv = pci_enable_device(pci_dev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_name(pci_dev);
#else
	print_name = pci_dev->slot_name;
#endif /* LINUX_VERSION_CODE */

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	/* map physical address to virtual address for accessing register */
	csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
	}

	/* Set DMA master */
	pci_set_master(pci_dev);


/*RtmpDevInit============================================== */
	/* Allocate RTMP_ADAPTER adapter structure */
/*	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pci_dev;

#ifdef OS_ABL_FUNC_SUPPORT
{
	RTMP_PCI_CONFIG PciConfig;
	PciConfig.ConfigVendorID = PCI_VENDOR_ID;
	/* get DRIVER operations */
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, NULL, &PciConfig, NULL);
}
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);	/* we may need the pci_dev for allocate structure of "RTMP_ADAPTER" */
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;
	/* Here are the RTMP_ADAPTER structure with pci-bus specific parameters. */
/*	pAd->CSRBaseAddress = (PUCHAR)csr_addr; */
	RTMP_DRIVER_PCI_CSR_SET(pAd, csr_addr);

/*	RTMPInitPCIeDevice(pci_dev, pAd); */
	RTMP_DRIVER_PCIE_INIT(pAd, pci_dev);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with pci-bus specific parameters. */
	net_dev->irq = pci_dev->irq;		/* Interrupt IRQ number */
	net_dev->base_addr = csr_addr;		/* Save CSR virtual address and irq to device structure */
	pci_set_drvdata(pci_dev, net_dev);	/* Set driver data */
	
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
/* for supporting Network Manager */
	/* Set the sysfs physical device reference for the network logical device
	  * if set prior to registration will cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(pci_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, pci_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(pci_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	rv = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;

#ifdef CONFIG_STA_SUPPORT
/*	pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#endif /* CONFIG_STA_SUPPORT */

/*#ifdef KTHREAD_SUPPORT */
#ifdef PRE_ASSIGN_MAC_ADDR
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__, PermanentAddress[0], PermanentAddress[1],PermanentAddress[2],PermanentAddress[3],PermanentAddress[4],PermanentAddress[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
#endif /* PRE_ASSIGN_MAC_ADDR */

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0; /* probe ok */


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); 
	
err_out_free_res:
	pci_release_regions(pci_dev);
	
err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV; /* probe fail */
}
Example #11
0
static int rt2870_probe(
	struct usb_interface *intf,
	struct usb_device *usb_dev,
	const USB_DEVICE_ID *dev_id,
	VOID **ppAd)
{
	struct net_device *net_dev = NULL;
#ifdef RESUME_WITH_USB_RESET_SUPPORT
	VOID *pAd = (VOID *) gpAd;
#else
	VOID *pAd = (VOID *) NULL;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */

	INT status, rv;
	PVOID handle;
	RTMP_OS_NETDEV_OP_HOOK netDevHook;
	ULONG OpMode;
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
/*	INT pm_usage_cnt; */
	INT res =1 ; 
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */	

	DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));
	
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
        res = usb_autopm_get_interface(intf);
	if (res)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("rt2870_probe autopm_resume fail ------\n"));
		return -EIO;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
	atomic_set(&intf->pm_usage_cnt, 1);
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", atomic_read(&intf->pm_usage_cnt));
#else
         intf->pm_usage_cnt = 1;
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", intf->pm_usage_cnt);
#endif
	
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */


	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		printk("rt2870_probe(): Allocate memory for os handle failed!\n");
		return -ENOMEM;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pUsb_Dev = usb_dev;

#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
	((POS_COOKIE)handle)->intf = intf;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */

	/* set/get operators to/from DRIVER module */
#ifdef OS_ABL_FUNC_SUPPORT
	/* get DRIVER operations */
	RtmpNetOpsInit(pRtmpDrvNetOps);
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, pRtmpDrvNetOps, NULL, NULL);
	RtmpNetOpsSet(pRtmpDrvNetOps);
#endif /* OS_ABL_FUNC_SUPPORT */

#ifdef RESUME_WITH_USB_RESET_SUPPORT
	if (rtusb_fast_probe(handle, &pAd, intf) == NDIS_STATUS_SUCCESS)
	{
		*ppAd = pAd;
		goto fast_probe_done;
	}	

#endif /* RESUME_WITH_USB_RESET_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS) 
	{
		os_free_mem(NULL, handle);
		goto err_out;
	}

	if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
		goto err_out_free_radev;

	RTMP_DRIVER_USB_INIT(pAd, usb_dev, dev_id->driver_info);
	
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with usb specific parameters. */
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
	/* for supporting Network Manager.
	  * Set the sysfs physical device reference for the network logical device if set prior to registration will 
	  * cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(usb_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
/*    pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#ifdef PROFILE_PATH_DYNAMIC
	RTMP_DRIVER_STA_PROFILEPATH_SET(pAd, (ULONG)profilePath);
#endif /* PROFILE_PATH_DYNAMIC */
#endif /* CONFIG_STA_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(usb_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, usb_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(usb_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	status = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (status != 0)
		goto err_out_free_netdev;

/*#ifdef KTHREAD_SUPPORT */
#if 0 /* move to RtmpOSTaskInit() */
{
	RT_CMD_WAIT_QUEUE_LIST List, *pList = &List;
	RTMP_DRIVER_TASK_LIST_GET(pAd, &List);

	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pMlmeTask)->kthread_q));
#ifdef RTMP_TIMER_TASK_SUPPORT
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pTimerTask)->kthread_q));
#endif /* RTMP_TIMER_TASK_SUPPORT */
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pCmdQTask)->kthread_q));
#ifdef WSC_INCLUDED
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pWscTask)->kthread_q));
#endif /* WSC_INCLUDED */
}
#endif /* KTHREAD_SUPPORT */

	*ppAd = pAd;
#ifdef RESUME_WITH_USB_RESET_SUPPORT
	gpAd = pAd;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */

#ifdef INF_PPA_SUPPORT
	RTMP_DRIVER_INF_PPA_INIT(pAd);
#endif /* INF_PPA_SUPPORT */

#ifdef PRE_ASSIGN_MAC_ADDR
{
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("%s():MAC Addr - %02x:%02x:%02x:%02x:%02x:%02x\n",
				__FUNCTION__, PermanentAddress[0], PermanentAddress[1],
				PermanentAddress[2],PermanentAddress[3],
				PermanentAddress[4],PermanentAddress[5]));

	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
}
#endif /* PRE_ASSIGN_MAC_ADDR */

#ifdef EXT_BUILD_CHANNEL_LIST
	RTMP_DRIVER_SET_PRECONFIG_VALUE(pAd);
#endif /* EXT_BUILD_CHANNEL_LIST */

	DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

	return 0;

	/* --------------------------- ERROR HANDLE --------------------------- */	
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	RTMPFreeAdapter(pAd);
	
err_out:
	*ppAd = NULL;

	return -1;
	
#ifdef RESUME_WITH_USB_RESET_SUPPORT
fast_probe_done:
	printk("fast probe done\n");
	return 0;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */
}
Example #12
0
static INT __devinit   rt2860_probe(
    IN  struct pci_dev              *pci_dev,
    IN  const struct pci_device_id  *pci_id)
{
	PRTMP_ADAPTER		pAd = (PRTMP_ADAPTER)NULL;
	struct  net_device		*net_dev;
	PVOID				handle;
	PSTRING				print_name;
	ULONG				csr_addr;
	INT rv = 0;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));


	
	if ((rv = pci_enable_device(pci_dev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_dev ? pci_name(pci_dev) : "rt3090";
#else
	print_name = pci_dev ? pci_dev->slot_name : "rt3090";
#endif 

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}

	
	csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name,
					(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
	}

	
	pci_set_master(pci_dev);



	
	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}

	((POS_COOKIE)handle)->pci_dev = pci_dev;

	rv = RTMPAllocAdapterBlock(handle, &pAd);	
	if (rv != NDIS_STATUS_SUCCESS)
		goto err_out_iounmap;
	
	pAd->CSRBaseAddress = (PUCHAR)csr_addr;
	DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, csr_addr));
	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_PCI);



	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;

	
	net_dev->irq = pci_dev->irq;		
	net_dev->base_addr = csr_addr;		
	pci_set_drvdata(pci_dev, net_dev);	

#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT

	
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
#endif
#endif 



	
	rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;

#ifdef CONFIG_STA_SUPPORT
	pAd->StaCfg.OriDevType = net_dev->type;
#endif 
RTMPInitPCIeDevice(pci_dev, pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0; 


	
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);

err_out_free_radev:
	
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));

err_out_free_res:
	pci_release_regions(pci_dev);

err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV; 
}