int gsmSendMessage(SM_PARAM* pSrc)
{
int nPduLength; // PDU串长度
unsigned char nSmscLength; // SMSC串长度
int nLength; // 串口收到的数据长度
char cmd[16]; // 命令串
char pdu[512]; // PDU串
char ans[128]; // 应答串
nPduLength = gsmEncodePdu(pSrc, pdu); // 根据PDU参数，编码PDU串
strcat(pdu, "\x01a"); // 以Ctrl-Z结束
TRACE("%s", pdu); //zhao
gsmString2Bytes(pdu, &nSmscLength, 2); // 取PDU串中的SMSC信息长度
nSmscLength++; // 加上长度字节本身
// 命令中的长度，不包括SMSC信息长度，以数据字节计
sprintf(cmd, "AT+CMGS=%d\r", nPduLength / 2 - nSmscLength); // 生成命令
TRACE("%s", cmd);
TRACE("%s\n", pdu);
WriteComm(cmd, strlen(cmd)); // 先输出命令串
nLength = ReadComm(ans, 128); // 读应答数据
// 根据能否找到"\r\n> "决定成功与否
if(nLength == 4 && strncmp(ans, "\r\n> ", 4) == 0)
{
return WriteComm(pdu, strlen(pdu)); // 得到肯定回答，继续输出PDU串
}
return 0;
}
int XTTY::WriteComm2(const char * buf, int n)
{
if (m_fLocalEcho)
WriteLog(buf, n);
return WriteComm(m_idComDev, buf, n);
}
void CSocketManager::OnDataReceived(const LPBYTE lpBuffer, DWORD dwCount)
{
LPBYTE lpData = lpBuffer;
SockAddrIn origAddr;
stMessageProxy msgProxy;
if (IsSmartAddressing())
{
dwCount = __min(sizeof(msgProxy), dwCount);
memcpy(&msgProxy, lpBuffer, dwCount);
origAddr = msgProxy.address;
if (IsServer())
{
// broadcast message to all
msgProxy.address.sin_addr.s_addr = htonl(INADDR_BROADCAST);
WriteComm((const LPBYTE)&msgProxy, dwCount, 0L);
}
dwCount -= sizeof(msgProxy.address);
lpData = msgProxy.byData;
}
// Display data to message list
DisplayData( lpData, dwCount, origAddr );
}
int far pascal zWriteComm( int pp1, void far* pp2, int pp3 )
{
int r;
SaveRegs();
/*
** Log IN Parameters (No Create/Destroy Checking Yet!)
*/
LogIn( (LPSTR)"APICALL:WriteComm int+FineString+",
pp1, (LPSTR) pp2, (int) pp3 );
/*
** Call the API!
*/
RestoreRegs();
GrovelDS();
r = WriteComm(pp1,pp2,pp3);
UnGrovelDS();
SaveRegs();
/*
** Log Return Code & OUT Parameters (No Create/Destroy Checking Yet!)
*/
LogOut( (LPSTR)"APIRET:WriteComm int++++",
r, (short)0, (short)0, (short)0 );
RestoreRegs();
return( r );
}
bool CStrainDevice::RequestDataB(long &ad)
{
if (m_hCom == INVALID_HANDLE_VALUE)
{
return false;
}
BYTE cmd = 'M';
WriteComm(&cmd, 1);
::Sleep(20);
BYTE bytesRead[5];
ZeroMemory(bytesRead, 2);
DWORD nCount = ReadComm(bytesRead, 5);
bool ok = (nCount == 5);
if (ok)
{
BYTE *ptr = (BYTE*)&ad;
ptr[0] = bytesRead[3];
ptr[1] = bytesRead[2];
ptr[2] = bytesRead[1];
ptr[3] = bytesRead[0];
}
return ok;
}
int TSerialConnection :: SendData ( char * buffer,
int buffer_size )
{
COMSTAT ComStat ;
register int size = buffer_size ;
if ( DeviceId < 0 )
return ( 0 ) ;
while ( size )
{
SetCommEventMask ( DeviceId, EV_TXEMPTY ) ;
while ( GetCommEventMask ( DeviceId, EV_TXEMPTY ) )
{
SetCommEventMask ( DeviceId, EV_TXEMPTY ) ;
}
GetCommError ( DeviceId, & ComStat ) ;
if ( ComStat. cbOutQue )
continue ;
WriteComm ( DeviceId, buffer, 1 ) ;
buffer ++, size -- ;
}
return ( buffer_size ) ;
}
void BlockWrite(unsigned int Xstart,unsigned int Xend,unsigned int Ystart,unsigned int Yend)
{
WriteComm(0x2a);
WriteData(Xstart>>8);
WriteData(Xstart&0xff);
WriteData(Xend>>8);
WriteData(Xend&0xff);
WriteComm(0x2b);
WriteData(Ystart>>8);
WriteData(Ystart&0xff);
WriteData(Yend>>8);
WriteData(Yend&0xff);
WriteComm(0x2c);
}
/*
LCD块写（大量数据修改，相当于擦除）
*/
void BlockWrite(unsigned int Xstart, unsigned int Xend, unsigned int Ystart, unsigned int Yend)
{
//ILI9163C
WriteComm(0x2A);
WriteData(Xstart >> 8);
WriteData(Xstart);
WriteData(Xend >> 8);
WriteData(Xend);
WriteComm(0x2B);
WriteData(Ystart >> 8);
WriteData(Ystart);
WriteData(Yend >> 8);
WriteData(Yend);
WriteComm(0x2c);
}
int gsmDeleteMessage(int index)
{
char cmd[16]; // 命令串
sprintf(cmd, "AT+CMGD=%d\r", index); // 生成命令
// 输出命令串
return WriteComm(cmd, strlen(cmd));
}
/*定位x0-127 y0-7*/
void set_xy(u8 x,u8 y)
{
if (x>=64)
{
CS1H;
Delay(1);
CS2L;
}
else
{
CS1L;
Delay(1);
CS2H;
}
WriteComm(0x40|x);
WriteComm(0xb8|y);
OutPutData(0xff); //判别是左半屏，还是右半屏
}
// 初始化GSM状态
BOOL gsmInit(const char* pPort)
{
char ans[128]; // 应答串
ZeroMemory(ans,128);
// 测试GSM-MODEM的存在性
WriteComm(pPort,"AT\r\n", 4);
ReadComm(pPort,ans, 128);
if (strstr(ans, "OK") == NULL) return FALSE;
// ECHO OFF
WriteComm(pPort,"ATE0\r", 5);
ReadComm(pPort,ans, 128);
// PDU模式
WriteComm(pPort,"AT+CMGF=0\r", 10);
ReadComm(pPort,ans, 128);
return TRUE;
}
// 初始化GSM状态
BOOL gsmInit()
{
char ans[128]; // 应答串
// 测试GSM-MODEM的存在性
WriteComm("AT\r", 3);
ReadComm(ans, 128);
if (strstr(ans, "OK") == NULL) return FALSE;
// ECHO OFF
WriteComm("ATE0\r", 5);
ReadComm(ans, 128);
// PDU模式
WriteComm("AT+CMGF=0\r", 10);
ReadComm(ans, 128);
return TRUE;
}
void CCommThread::SendTxBuff(){
BOOL bResult;
for(int i=mIndex; i<mTotalcnt; i++ ){
if(WriteComm(TxPktBuff[i].PKT, TxPktBuff[i].LENGTH)){
mCommand = WRITEDATA_CMD;
bResult = TRUE;
}
if(bResult)
createtimeoutThread();
}
mIndex = mTotalcnt;
}
u16 GetPoint( u16 x, u16 y)
{
WriteComm(0x2a);
WriteData(x>>8);
WriteData(x);
WriteData(x>>8);
WriteData(x);
WriteComm(0x2b);
WriteData(y>>8);
WriteData(y);
WriteData(y>>8);
WriteData(y);
WriteComm(0x2e);
x = *(__IO u16 *) (Bank1_LCD_D);x=1;while(--x);
x = *(__IO u16 *) (Bank1_LCD_D);
y = *(__IO u16 *) (Bank1_LCD_D);
// printf("RIN=%04x\r\n",b);
return (x&0xf800)|((x&0x00fc)<<3)|(y>>11);
}
bool CStrainDevice::RequestAddr(BYTE addr /* = 0 */)
{
if (m_hCom == INVALID_HANDLE_VALUE)
{
return false;
}
BYTE cmd[2];
cmd[0] = 'K';
cmd[1] = 0;
WriteComm(cmd, 2);
::Sleep(100);
BYTE to_read[2];
ZeroMemory(to_read, 2);
ReadComm(to_read, 2);
return memcmp(cmd, to_read, 2) == 0;
}
//-------------------------------------------------------------------
// Write an array of bytes to the COM port, verify that it was
// sent out. Assume that baud rate has been set and the buffers have
// been flushed.
//
// portnum - number 0 to MAX_PORTNUM-1. This number is provided to
// indicate the symbolic port number.
// outlen - the length of the data to be written
// outbuf - the output data
//
// Returns TRUE for success and FALSE for failure
//
int WriteCOM(int portnum, int outlen, uchar *outbuf)
{
short result;
COMSTAT ComStat;
ulong m;
// declare and set the default timeout
int timeout = 20 * outlen + 60;
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
#ifdef DODEBUG
short i;
printf("W[");
for (i = 0; i < outlen; i++)
printf("%02X ",outbuf[i]);
#endif
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
// Send data to write buffer
result = WriteComm(ComID[portnum],outbuf,outlen);
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
#ifdef DODEBUG
printf("(%d)]",result);
#endif
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
// loop to wait for the write to complete
if (result == outlen)
{
m = (ulong)msGettick() + (ulong)timeout;
do
{
// yield this process
//Yield();
GetCommError(ComID[portnum],&ComStat);
if ((short)ComStat.cbOutQue == 0)
return result;
}
while ((ulong)msGettick() <= m);
}
else
return FALSE;
}
int gsmReadMessageList(const char* pPort)
{
return WriteComm(pPort,"AT+CMGL=0\r", 10); //zhao
}
int gsmReadMessageList()
{
return WriteComm("AT+CMGL=4\r", 10); //zhao
}
/*
LCD初始化函数
*/
void LCD_Init(void)
{
DELAY_MS(100);
RET_SET;
DELAY_MS(100);
RET_CLEAR;
DELAY_MS(100);
RET_SET;
DELAY_MS(100);
//-------------Start Initial Sequence--------//
WriteComm(0x11); //Exit Sleep
DELAY_MS(10);//20
WriteComm(0x26); //Set Default Gamma
WriteData(0x04);
WriteComm(0xB1);//Set Frame Rate
WriteData(0x0B);
WriteData(0x14);
WriteComm(0xC0); //Set VRH1[4:0] & VC[2:0] for VCI1 & GVDD
WriteData(0x0C);
WriteData(0x05);
WriteComm(0xC1); //Set BT[2:0] for AVDD & VCL & VGH & VGL
WriteData(0x02);
WriteComm(0xC5); //Set VMH[6:0] & VML[6:0] for VOMH & VCOML
WriteData(0x3F);//44
WriteData(0x48);
WriteComm(0xC7);// Set VMF
WriteData(0xC2);
WriteComm(0x2A); //Set Column Address
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteData(0x7F);
WriteComm(0x2B); //Set Page Address
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteData(0x9F);
WriteComm(0x3A); //Set Color Format
WriteData(0x55);
WriteComm(0x36);
WriteData(0xC8);
WriteComm(0xF2); //Enable Gamma bit
WriteData(0x01);
WriteComm(0xE0);
WriteData(0x3F);//p1
WriteData(0x25);//p2
WriteData(0x21);//p3
WriteData(0x24);//p4
WriteData(0x1D);//p5
WriteData(0x0D);//p6
WriteData(0x4C);//p7
WriteData(0xB8);//p8
WriteData(0x38);//p9
WriteData(0x17);//p10
WriteData(0x0F);//p11
WriteData(0x08);//p12
WriteData(0x04);//p13
WriteData(0x02);//p14
WriteData(0x00);//p15
WriteComm(0xE1);
WriteData(0x00);//p1
WriteData(0x1A);//p2
WriteData(0x1E);//p3
WriteData(0x0B);//p4
WriteData(0x12);//p5
WriteData(0x12);//p6
WriteData(0x33);//p7
WriteData(0x47);//p8
WriteData(0x47);//p9
WriteData(0x08);//p10
WriteData(0x20);//p11
WriteData(0x27);//p12
WriteData(0x3C);//p13
WriteData(0x3D);//p14
WriteData(0x3F);//p15
WriteComm(0x36); //MX, MY, RGB mode
WriteData(0xC0);//c8竖屏 68横屏
WriteComm(0x29); // Display On
WriteComm(0x2C);
}
/**********************************************
Lcd初始化函数
***********************************************/
void Lcd_Initialize(void)
{
LCD_GPIO_Config();
LCD_FSMC_Config();
LCD_Rst();
//************* Start Initial Sequence **********//
WriteComm(0xFF); // EXTC Command Set enable register
WriteData(0xFF);
WriteData(0x98);
WriteData(0x06);
WriteComm(0xBA); // SPI Interface Setting
WriteData(0xE0);
WriteComm(0xBC); // GIP 1
WriteData(0x03);
WriteData(0x0F);
WriteData(0x63);
WriteData(0x69);
WriteData(0x01);
WriteData(0x01);
WriteData(0x1B);
WriteData(0x11);
WriteData(0x70);
WriteData(0x73);
WriteData(0xFF);
WriteData(0xFF);
WriteData(0x08);
WriteData(0x09);
WriteData(0x05);
WriteData(0x00);
WriteData(0xEE);
WriteData(0xE2);
WriteData(0x01);
WriteData(0x00);
WriteData(0xC1);
WriteComm(0xBD); // GIP 2
WriteData(0x01);
WriteData(0x23);
WriteData(0x45);
WriteData(0x67);
WriteData(0x01);
WriteData(0x23);
WriteData(0x45);
WriteData(0x67);
WriteComm(0xBE); // GIP 3
WriteData(0x00);
WriteData(0x22);
WriteData(0x27);
WriteData(0x6A);
WriteData(0xBC);
WriteData(0xD8);
WriteData(0x92);
WriteData(0x22);
WriteData(0x22);
WriteComm(0xC7); // Vcom
WriteData(0x1E);
WriteComm(0xED); // EN_volt_reg
WriteData(0x7F);
WriteData(0x0F);
WriteData(0x00);
WriteComm(0xC0); // Power Control 1
WriteData(0xE3);
WriteData(0x0B);
WriteData(0x00);
WriteComm(0xFC);
WriteData(0x08);
WriteComm(0xDF); // Engineering Setting
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteData(0x02);
WriteComm(0xF3); // DVDD Voltage Setting
WriteData(0x74);
WriteComm(0xB4); // Display Inversion Control
WriteData(0x00);
WriteData(0x00);
WriteData(0x00);
WriteComm(0xF7); // 480x854
WriteData(0x81);
WriteComm(0xB1); // Frame Rate
WriteData(0x00);
WriteData(0x10);
WriteData(0x14);
WriteComm(0xF1); // Panel Timing Control
WriteData(0x29);
WriteData(0x8A);
WriteData(0x07);
WriteComm(0xF2); //Panel Timing Control
WriteData(0x40);
WriteData(0xD2);
WriteData(0x50);
WriteData(0x28);
WriteComm(0xC1); // Power Control 2
WriteData(0x17);
WriteData(0X85);
WriteData(0x85);
WriteData(0x20);
WriteComm(0xE0);
WriteData(0x00); //P1
WriteData(0x0C); //P2
WriteData(0x15); //P3
WriteData(0x0D); //P4
WriteData(0x0F); //P5
WriteData(0x0C); //P6
WriteData(0x07); //P7
WriteData(0x05); //P8
WriteData(0x07); //P9
WriteData(0x0B); //P10
WriteData(0x10); //P11
WriteData(0x10); //P12
WriteData(0x0D); //P13
WriteData(0x17); //P14
WriteData(0x0F); //P15
WriteData(0x00); //P16
WriteComm(0xE1);
WriteData(0x00); //P1
WriteData(0x0D); //P2
WriteData(0x15); //P3
WriteData(0x0E); //P4
WriteData(0x10); //P5
WriteData(0x0D); //P6
WriteData(0x08); //P7
WriteData(0x06); //P8
WriteData(0x07); //P9
WriteData(0x0C); //P10
WriteData(0x11); //P11
WriteData(0x11); //P12
WriteData(0x0E); //P13
WriteData(0x17); //P14
WriteData(0x0F); //P15
WriteData(0x00); //P16
WriteComm(0x35); //Tearing Effect ON
WriteData(0x00);
WriteComm(0x36);
WriteData(0x60);
WriteComm(0x3A);
WriteData(0x55);
WriteComm(0x11); //Exit Sleep
LCD_delay(120);
WriteComm(0x29); // Display On
LCD_delay(10);
Lcd_Light_ON;
WriteComm(0x3A); WriteData(0x55);
WriteComm(0x36); WriteData(0xA8);
Lcd_ColorBox(0,0,800,480,YELLOW);
// LCD_Fill_Pic(80,160,320,480, gImage_MM_T035);
// BlockWrite(0,0,799,479);
}
/**********************************************
Lcd初始化函数
Initial condition (DB0-15,RS,CSB,WRD,RDB,RESETB="L")
***********************************************/
void Lcd_Initialize(void)
{
int i;
SPI_CS(1);
WriteComm(0x0001);
Delay(100);
SPI_CS(0);
WriteComm(0x0011);
Delay(20);
WriteComm(0x00D0);
WriteData(0x0007);
WriteData(0x0041);
WriteData(0x001C);
WriteComm(0x00D1);
WriteData(0x0000);
WriteData(0x0036); //30 vcm
WriteData(0x001B); //15 vdv
WriteComm(0x00D2);
WriteData(0x0001); // AP0[2:0]
WriteData(0x0011); // DC10[2:0],DC00[2:0]
WriteComm(0x00C0); //****** *******
WriteData(0x0010); // REV & SM & GS
WriteData(0x003B); // NL[5:0]
WriteData(0x0000); // SCN[6:0]
WriteData(0x0012); //02 NDL , PTS[2:0]
WriteData(0x0001); //11 PTG , ISC[3:0]
WriteComm(0x00C5);
WriteData(0x0003);
WriteComm(0x00C8);
WriteData(0x0000);
WriteData(0x0057);
WriteData(0x0033);
WriteData(0x0000);
WriteData(0x0000);
WriteData(0x0000);
WriteData(0x0044);
WriteData(0x0002);
WriteData(0x0077);
WriteData(0x0000);
WriteData(0x0000);
WriteData(0x0000);
WriteComm(0x00F8);
WriteData(0x0001);
WriteComm(0x00FE);
WriteData(0x0000);
WriteData(0x0002);
WriteComm(0x0036); // Set_address_mode
WriteData(0x000A); // Bit3: RGB/BGR
Delay(20);
WriteComm(0x003a); // Set_address_mode
WriteData(0x0055); //05---16BIT,06---18BIT
Delay(20);
WriteComm(0x0029);
Delay(10);
WriteComm(0x36); //Set_address_mode
WriteData(0x68); //横屏，从左下角开始，从左到右，从下到上
Lcd_Light_ON;
// while(1)
{
WriteComm(0x36);//竖屏
WriteData(0x48);//
// while(!(SPI1->SR&0x0002));
for(i=0;i<320*480;i++)
{
LCD_RS(1);
SPI_I2S_SendData(SPI1, COLOR_BLUE>>8);
LCD_RS(1);
SPI_I2S_SendData(SPI1, COLOR_BLUE);
}
for(i=0;i<320*480;i++)
{
LCD_RS(1);
SPI_I2S_SendData(SPI1, COLOR_YELLOW>>8);
LCD_RS(1);
SPI_I2S_SendData(SPI1, COLOR_YELLOW);
}
WriteComm(0x36);
WriteData(0x28);//
}
}