static void __init yl9200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD | ATMEL_UART_RI); /* USART0 on ttyS2. (Rx & Tx only to JP3) */ at91_register_uart(AT91RM9200_ID_US0, 2, 0); /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); /* set serial console to ttyS0 (ie, DBGU) */ at91_set_serial_console(0); }
static void __init cpuat91_map_io(void) { at91rm9200_initialize(18432000, AT91RM9200_PQFP); at91_register_uart(0, 0, 0); at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_register_uart(AT91RM9200_ID_US2, 3, 0); at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_set_serial_console(0); }
static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the serial ports and console */ at91_init_serial(&onearm_uart_config); }
static void __init carmeva_map_io(void) { /* Initialize processor: 20.000 MHz crystal */ at91rm9200_initialize(20000000, AT91RM9200_BGA); /* Setup the serial ports and console */ at91_init_serial(&carmeva_uart_config); }
static void __init onearm_map_io(void) { at91rm9200_initialize(18432000, AT91RM9200_PQFP); at91_init_serial(&onearm_uart_config); }
static void __init csb337_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Setup the serial ports and console */ at91_init_serial(&csb337_uart_config); }
static void __init dk_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); /* Setup the serial ports and console */ at91_init_serial(&dk_uart_config); }
static void __init csb637_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* make console=ttyS0 (ie, DBGU) the default */ at91_set_serial_console(0); }
static void __init kb9202_map_io(void) { /* Initialize processor: 10 MHz crystal */ at91rm9200_initialize(10000000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); /* Setup the serial ports and console */ at91_init_serial(&kb9202_uart_config); }
static void __init yl_9200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ /*Also initialises register clocks & gpio*/ at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/ /* Setup the serial ports and console */ at91_init_serial(&yl_9200_uart_config); /* Setup the LEDs D2=PB17,D3=PB16 */ at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/ }
static void __init csb337_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* DBGU on ttyS0 */ at91_register_uart(0, 0, 0); /* make console=ttyS0 the default */ at91_set_serial_console(0); }
static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD | ATMEL_UART_RI); /* set serial console to ttyS0 (ie, DBGU) */ at91_set_serial_console(0); }
static void __init ecb_at91map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* USART0 on ttyS1. (Rx & Tx only) */ at91_register_uart(AT91RM9200_ID_US0, 1, 0); /* set serial console to ttyS0 (ie, DBGU) */ at91_set_serial_console(0); }
static void __init dk_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD | ATMEL_UART_RI); /* set serial console to ttyS0 (ie, DBGU) */ at91_set_serial_console(0); }
static void __init kb9202_map_io(void) { /* Initialize processor: 10 MHz crystal */ at91rm9200_initialize(10000000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); /* USART0 on ttyS1 (Rx & Tx only) */ at91_register_uart(AT91RM9200_ID_US0, 1, 0); /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ at91_register_uart(AT91RM9200_ID_US1, 2, 0); /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); /* set serial console to ttyS0 (ie, DBGU) */ at91_set_serial_console(0); }