Static void
url_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct url_chain *c = priv;
struct url_softc *sc = c->url_sc;
struct ifnet *ifp = GET_IFP(sc);
struct mbuf *m;
u_int32_t total_len;
url_rxhdr_t rxhdr;
int s;
DPRINTF(("%s: %s: enter\n", device_xname(sc->sc_dev),__func__));
if (sc->sc_dying)
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
sc->sc_rx_errs++;
if (usbd_ratecheck(&sc->sc_rx_notice)) {
printf("%s: %u usb errors on rx: %s\n",
device_xname(sc->sc_dev), sc->sc_rx_errs,
usbd_errstr(status));
sc->sc_rx_errs = 0;
}
if (status == USBD_STALLED) {
sc->sc_refcnt++;
usbd_clear_endpoint_stall_async(sc->sc_pipe_rx);
if (--sc->sc_refcnt < 0)
usb_detach_wakeupold(sc->sc_dev);
}
goto done;
}
usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
memcpy(mtod(c->url_mbuf, char *), c->url_buf, total_len);
if (total_len <= ETHER_CRC_LEN) {
ifp->if_ierrors++;
goto done;
}
memcpy(&rxhdr, c->url_buf + total_len - ETHER_CRC_LEN, sizeof(rxhdr));
DPRINTF(("%s: RX Status: %dbytes%s%s%s%s packets\n",
device_xname(sc->sc_dev),
UGETW(rxhdr) & URL_RXHDR_BYTEC_MASK,
UGETW(rxhdr) & URL_RXHDR_VALID_MASK ? ", Valid" : "",
UGETW(rxhdr) & URL_RXHDR_RUNTPKT_MASK ? ", Runt" : "",
UGETW(rxhdr) & URL_RXHDR_PHYPKT_MASK ? ", Physical match" : "",
UGETW(rxhdr) & URL_RXHDR_MCASTPKT_MASK ? ", Multicast" : ""));
if ((UGETW(rxhdr) & URL_RXHDR_VALID_MASK) == 0) {
ifp->if_ierrors++;
goto done;
}
ifp->if_ipackets++;
total_len -= ETHER_CRC_LEN;
m = c->url_mbuf;
m->m_pkthdr.len = m->m_len = total_len;
m->m_pkthdr.rcvif = ifp;
s = splnet();
if (url_newbuf(sc, c, NULL) == ENOBUFS) {
ifp->if_ierrors++;
goto done1;
}
bpf_mtap(ifp, m);
DPRINTF(("%s: %s: deliver %d\n", device_xname(sc->sc_dev),
__func__, m->m_len));
(*(ifp)->if_input)((ifp), (m));
done1:
splx(s);
done:
/* Setup new transfer */
usbd_setup_xfer(xfer, sc->sc_pipe_rx, c, c->url_buf, URL_BUFSZ,
USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, url_rxeof);
sc->sc_refcnt++;
usbd_transfer(xfer);
if (--sc->sc_refcnt < 0)
usb_detach_wakeupold(sc->sc_dev);
DPRINTF(("%s: %s: start rx\n", device_xname(sc->sc_dev), __func__));
}
static void
cy693_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa)
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
if (pciide_chipen(sc, pa) == 0)
return;
/*
* this chip has 2 PCI IDE functions, one for primary and one for
* secondary. So we need to call pciide_mapregs_compat() with
* the real channel
*/
if (pa->pa_function == 1) {
sc->sc_cy_compatchan = 0;
} else if (pa->pa_function == 2) {
sc->sc_cy_compatchan = 1;
} else {
aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"unexpected PCI function %d\n", pa->pa_function);
return;
}
if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"bus-master DMA support present\n");
pciide_mapreg_dma(sc, pa);
} else {
aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"hardware does not support DMA\n");
sc->sc_dma_ok = 0;
}
sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
if (sc->sc_cy_handle == NULL) {
aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"unable to map hyperCache control registers\n");
sc->sc_dma_ok = 0;
}
sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
sc->sc_wdcdev.sc_atac.atac_set_modes = cy693_setup_channel;
sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
sc->sc_wdcdev.sc_atac.atac_nchannels = 1;
sc->sc_wdcdev.wdc_maxdrives = 2;
wdc_allocate_regs(&sc->sc_wdcdev);
/* Only one channel for this chip; if we are here it's enabled */
cp = &sc->pciide_channels[0];
sc->wdc_chanarray[0] = &cp->ata_channel;
cp->name = PCIIDE_CHANNEL_NAME(0);
cp->ata_channel.ch_channel = 0;
cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
cp->ata_channel.ch_queue =
malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT);
if (cp->ata_channel.ch_queue == NULL) {
aprint_error("%s primary channel: "
"can't allocate memory for command queue",
device_xname(sc->sc_wdcdev.sc_atac.atac_dev));
return;
}
aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"primary channel %s to ",
(interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
"configured" : "wired");
if (interface & PCIIDE_INTERFACE_PCI(0)) {
aprint_normal("native-PCI mode\n");
pciide_mapregs_native(pa, cp, pciide_pci_intr);
} else {
aprint_normal("compatibility mode\n");
pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan);
if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0)
pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan);
}
wdcattach(&cp->ata_channel);
}
static void
ahc_eisa_attach(device_t parent, device_t self, void *aux)
{
struct ahc_softc *ahc = device_private(self);
struct eisa_attach_args *ea = aux;
eisa_chipset_tag_t ec = ea->ea_ec;
eisa_intr_handle_t ih;
bus_space_tag_t iot = ea->ea_iot;
bus_space_handle_t ioh;
int irq, intrtype;
const char *intrstr, *intrtypestr;
u_int biosctrl;
u_int scsiconf;
u_int scsiconf1;
u_char intdef;
#ifdef AHC_DEBUG
int i;
#endif
char intrbuf[EISA_INTRSTR_LEN];
ahc->sc_dev = self;
if (bus_space_map(iot, EISA_SLOT_ADDR(ea->ea_slot) +
AHC_EISA_SLOT_OFFSET, AHC_EISA_IOSIZE, 0, &ioh)) {
aprint_error_dev(ahc->sc_dev, "could not map I/O addresses");
return;
}
if ((irq = ahc_aic77xx_irq(iot, ioh)) < 0) {
aprint_error_dev(ahc->sc_dev, "ahc_aic77xx_irq failed!");
goto free_io;
}
if (strcmp(ea->ea_idstring, "ADP7770") == 0) {
printf(": %s\n", EISA_PRODUCT_ADP7770);
} else if (strcmp(ea->ea_idstring, "ADP7771") == 0) {
printf(": %s\n", EISA_PRODUCT_ADP7771);
} else {
printf(": Unknown device type %s", ea->ea_idstring);
goto free_io;
}
ahc_set_name(ahc, device_xname(ahc->sc_dev));
ahc->parent_dmat = ea->ea_dmat;
ahc->chip = AHC_AIC7770|AHC_EISA;
ahc->features = AHC_AIC7770_FE;
ahc->flags = AHC_PAGESCBS;
ahc->bugs = AHC_TMODE_WIDEODD_BUG;
ahc->tag = iot;
ahc->bsh = ioh;
ahc->channel = 'A';
if (ahc_softc_init(ahc) != 0)
goto free_io;
ahc_intr_enable(ahc, FALSE);
if (ahc_reset(ahc) != 0)
goto free_io;
if (eisa_intr_map(ec, irq, &ih)) {
aprint_error_dev(ahc->sc_dev, "couldn't map interrupt (%d)\n",
irq);
goto free_io;
}
intdef = bus_space_read_1(iot, ioh, INTDEF);
if (intdef & EDGE_TRIG) {
intrtype = IST_EDGE;
intrtypestr = "edge triggered";
} else {
intrtype = IST_LEVEL;
intrtypestr = "level sensitive";
}
intrstr = eisa_intr_string(ec, ih, intrbuf, sizeof(intrbuf));
ahc->ih = eisa_intr_establish(ec, ih,
intrtype, IPL_BIO, ahc_intr, ahc);
if (ahc->ih == NULL) {
aprint_error_dev(ahc->sc_dev, "couldn't establish %s interrupt",
intrtypestr);
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
goto free_io;
}
if (intrstr != NULL)
aprint_normal_dev(ahc->sc_dev, "%s interrupting at %s\n",
intrtypestr, intrstr);
/*
* Now that we know we own the resources we need, do the
* card initialization.
*
* First, the aic7770 card specific setup.
*/
biosctrl = ahc_inb(ahc, HA_274_BIOSCTRL);
scsiconf = ahc_inb(ahc, SCSICONF);
scsiconf1 = ahc_inb(ahc, SCSICONF + 1);
#ifdef AHC_DEBUG
for (i = TARG_SCSIRATE; i <= HA_274_BIOSCTRL; i+=8) {
printf("0x%x, 0x%x, 0x%x, 0x%x, "
"0x%x, 0x%x, 0x%x, 0x%x\n",
ahc_inb(ahc, i),
ahc_inb(ahc, i+1),
ahc_inb(ahc, i+2),
ahc_inb(ahc, i+3),
ahc_inb(ahc, i+4),
ahc_inb(ahc, i+5),
ahc_inb(ahc, i+6),
ahc_inb(ahc, i+7));
}
#endif
/* Get the primary channel information */
if ((biosctrl & CHANNEL_B_PRIMARY) != 0)
ahc->flags |= AHC_PRIMARY_CHANNEL;
if ((biosctrl & BIOSMODE) == BIOSDISABLED) {
ahc->flags |= AHC_USEDEFAULTS;
} else if ((ahc->features & AHC_WIDE) != 0) {
ahc->our_id = scsiconf1 & HWSCSIID;
if (scsiconf & TERM_ENB)
ahc->flags |= AHC_TERM_ENB_A;
} else {
ahc->our_id = scsiconf & HSCSIID;
ahc->our_id_b = scsiconf1 & HSCSIID;
if (scsiconf & TERM_ENB)
ahc->flags |= AHC_TERM_ENB_A;
if (scsiconf1 & TERM_ENB)
ahc->flags |= AHC_TERM_ENB_B;
}
if ((ahc_inb(ahc, HA_274_BIOSGLOBAL) & HA_274_EXTENDED_TRANS))
ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B;
/* Attach sub-devices */
if (ahc_aic77xx_attach(ahc) == 0)
return; /* succeed */
/* failed */
eisa_intr_disestablish(ec, ahc->ih);
free_io:
bus_space_unmap(iot, ioh, AHC_EISA_IOSIZE);
}
static int
cuda_intr(void *arg)
{
struct cuda_softc *sc = arg;
int i, ending, type;
uint8_t reg;
reg = cuda_read_reg(sc, vIFR); /* Read the interrupts */
DPRINTF("[");
if ((reg & 0x80) == 0) {
DPRINTF("irq %02x]", reg);
return 0; /* No interrupts to process */
}
DPRINTF(":");
cuda_write_reg(sc, vIFR, 0x7f); /* Clear 'em */
switch_start:
switch (sc->sc_state) {
case CUDA_IDLE:
/*
* This is an unexpected packet, so grab the first (dummy)
* byte, set up the proper vars, and tell the chip we are
* starting to receive the packet by setting the TIP bit.
*/
sc->sc_in[1] = cuda_read_reg(sc, vSR);
DPRINTF("start: %02x", sc->sc_in[1]);
if (cuda_intr_state(sc) == 0) {
/* must have been a fake start */
DPRINTF(" ... fake start\n");
if (sc->sc_waiting) {
/* start over */
delay(150);
sc->sc_state = CUDA_OUT;
sc->sc_sent = 0;
cuda_out(sc);
cuda_write_reg(sc, vSR, sc->sc_out[1]);
cuda_ack_off(sc);
cuda_tip(sc);
}
break;
}
cuda_in(sc);
cuda_tip(sc);
sc->sc_received = 1;
sc->sc_state = CUDA_IN;
DPRINTF(" CUDA_IN");
break;
case CUDA_IN:
sc->sc_in[sc->sc_received] = cuda_read_reg(sc, vSR);
DPRINTF(" %02x", sc->sc_in[sc->sc_received]);
ending = 0;
if (sc->sc_received > 255) {
/* bitch only once */
if (sc->sc_received == 256) {
printf("%s: input overflow\n",
device_xname(sc->sc_dev));
ending = 1;
}
} else
sc->sc_received++;
if (sc->sc_received > 3) {
if ((sc->sc_in[3] == CMD_IIC) &&
(sc->sc_received > (sc->sc_i2c_read_len + 4))) {
ending = 1;
}
}
/* intr off means this is the last byte (end of frame) */
if (cuda_intr_state(sc) == 0) {
ending = 1;
DPRINTF(".\n");
} else {
cuda_toggle_ack(sc);
}
if (ending == 1) { /* end of message? */
sc->sc_in[0] = sc->sc_received - 1;
/* reset vars and signal the end of this frame */
cuda_idle(sc);
/* check if we have a handler for this message */
type = sc->sc_in[1];
if ((type >= 0) && (type < 16)) {
CudaHandler *me = &sc->sc_handlers[type];
if (me->handler != NULL) {
me->handler(me->cookie,
sc->sc_received - 1, &sc->sc_in[1]);
} else {
printf("no handler for type %02x\n", type);
panic("barf");
}
}
DPRINTF("CUDA_IDLE");
sc->sc_state = CUDA_IDLE;
sc->sc_received = 0;
/*
* If there is something waiting to be sent out,
* set everything up and send the first byte.
*/
if (sc->sc_waiting == 1) {
DPRINTF("pending write\n");
delay(1500); /* required */
sc->sc_sent = 0;
sc->sc_state = CUDA_OUT;
/*
* If the interrupt is on, we were too slow
* and the chip has already started to send
* something to us, so back out of the write
* and start a read cycle.
*/
if (cuda_intr_state(sc)) {
cuda_in(sc);
cuda_idle(sc);
sc->sc_sent = 0;
sc->sc_state = CUDA_IDLE;
sc->sc_received = 0;
delay(150);
DPRINTF("too slow - incoming message\n");
goto switch_start;
}
/*
* If we got here, it's ok to start sending
* so load the first byte and tell the chip
* we want to send.
*/
DPRINTF("sending ");
cuda_out(sc);
cuda_write_reg(sc, vSR,
sc->sc_out[sc->sc_sent]);
cuda_ack_off(sc);
cuda_tip(sc);
}
}
break;
case CUDA_OUT:
i = cuda_read_reg(sc, vSR); /* reset SR-intr in IFR */
sc->sc_sent++;
if (cuda_intr_state(sc)) { /* ADB intr low during write */
DPRINTF("incoming msg during send\n");
cuda_in(sc); /* make sure SR is set to IN */
cuda_idle(sc);
sc->sc_sent = 0; /* must start all over */
sc->sc_state = CUDA_IDLE; /* new state */
sc->sc_received = 0;
sc->sc_waiting = 1; /* must retry when done with
* read */
delay(150);
goto switch_start; /* process next state right
* now */
break;
}
if (sc->sc_out_length == sc->sc_sent) { /* check for done */
sc->sc_waiting = 0; /* done writing */
sc->sc_state = CUDA_IDLE; /* signal bus is idle */
cuda_in(sc);
cuda_idle(sc);
DPRINTF("done sending\n");
} else {
/* send next byte */
cuda_write_reg(sc, vSR, sc->sc_out[sc->sc_sent]);
cuda_toggle_ack(sc); /* signal byte ready to
* shift */
}
break;
case CUDA_NOTREADY:
DPRINTF("adb: not yet initialized\n");
break;
default:
DPRINTF("intr: unknown ADB state\n");
break;
}
DPRINTF("]");
return 1;
}
int
mtopen(dev_t dev, int flag, int mode, struct lwp *l)
{
struct mt_softc *sc;
int req_den;
int error;
sc = device_lookup_private(&mt_cd, MTUNIT(dev));
if (sc == NULL || (sc->sc_flags & MTF_EXISTS) == 0)
return (ENXIO);
if (sc->sc_flags & MTF_OPEN)
return (EBUSY);
DPRINTF(MDB_ANY, ("%s open: flags 0x%x", device_xname(sc->sc_dev),
sc->sc_flags));
sc->sc_flags |= MTF_OPEN;
sc->sc_ttyp = tprintf_open(l->l_proc);
if ((sc->sc_flags & MTF_ALIVE) == 0) {
error = mtcommand(dev, MTRESET, 0);
if (error != 0 || (sc->sc_flags & MTF_ALIVE) == 0)
goto errout;
if ((sc->sc_stat1 & (SR1_BOT | SR1_ONLINE)) == SR1_ONLINE)
(void) mtcommand(dev, MTREW, 0);
}
for (;;) {
if ((error = mtcommand(dev, MTNOP, 0)) != 0)
goto errout;
if (!(sc->sc_flags & MTF_REW))
break;
error = kpause("mt", true, hz, NULL);
if (error != 0 && error != EWOULDBLOCK) {
error = EINTR;
goto errout;
}
}
if ((flag & FWRITE) && (sc->sc_stat1 & SR1_RO)) {
error = EROFS;
goto errout;
}
if (!(sc->sc_stat1 & SR1_ONLINE)) {
uprintf("%s: not online\n", device_xname(sc->sc_dev));
error = EIO;
goto errout;
}
/*
* Select density:
* - find out what density the drive is set to
* (i.e. the density of the current tape)
* - if we are going to write
* - if we're not at the beginning of the tape
* - complain if we want to change densities
* - otherwise, select the mtcommand to set the density
*
* If the drive doesn't support it then don't change the recorded
* density.
*
* The original MOREbsd code had these additional conditions
* for the mid-tape change
*
* req_den != T_BADBPI &&
* sc->sc_density != T_6250BPI
*
* which suggests that it would be possible to write multiple
* densities if req_den == T_BAD_BPI or the current tape
* density was 6250. Testing of our 7980 suggests that the
* device cannot change densities mid-tape.
*
* [email protected]
*/
sc->sc_density = (sc->sc_stat2 & SR2_6250) ? T_6250BPI : (
(sc->sc_stat3 & SR3_1600) ? T_1600BPI : (
(sc->sc_stat3 & SR3_800) ? T_800BPI : -1));
req_den = (dev & T_DENSEL);
if (flag & FWRITE) {
if (!(sc->sc_stat1 & SR1_BOT)) {
if (sc->sc_density != req_den) {
uprintf("%s: can't change density mid-tape\n",
device_xname(sc->sc_dev));
error = EIO;
goto errout;
}
}
else {
int mtset_density =
(req_den == T_800BPI ? MTSET800BPI : (
req_den == T_1600BPI ? MTSET1600BPI : (
req_den == T_6250BPI ? MTSET6250BPI : (
sc->sc_type == MT7980ID
? MTSET6250DC
: MTSET6250BPI))));
if (mtcommand(dev, mtset_density, 0) == 0)
sc->sc_density = req_den;
}
}
return (0);
errout:
sc->sc_flags &= ~MTF_OPEN;
return (error);
}
/* sun4m vmebus */
static void
vmeattach_iommu(device_t parent, device_t self, void *aux)
{
#if defined(SUN4M)
struct sparcvme_softc *sc = device_private(self);
struct iommu_attach_args *ia = aux;
struct vmebus_attach_args vba;
bus_space_handle_t bh;
int node;
int cline;
sc->sc_bustag = ia->iom_bustag;
sc->sc_dmatag = ia->iom_dmatag;
/* VME interrupt entry point */
sc->sc_vmeintr = vmeintr4m;
/*XXX*/ sparc_vme_chipset_tag.cookie = sc;
/*XXX*/ sparc_vme_chipset_tag.vct_dmamap_create = sparc_vct_iommu_dmamap_create;
/*XXX*/ sparc_vme_chipset_tag.vct_dmamap_destroy = sparc_vct_dmamap_destroy;
/*XXX*/ sparc_vme_iommu_dma_tag._cookie = sc;
vba.va_vct = &sparc_vme_chipset_tag;
vba.va_bdt = &sparc_vme_iommu_dma_tag;
vba.va_slaveconfig = 0;
node = ia->iom_node;
/*
* Map VME control space
*/
if (ia->iom_nreg < 2) {
printf("%s: only %d register sets\n", device_xname(self),
ia->iom_nreg);
return;
}
if (bus_space_map(ia->iom_bustag,
(bus_addr_t) BUS_ADDR(ia->iom_reg[0].oa_space,
ia->iom_reg[0].oa_base),
(bus_size_t)ia->iom_reg[0].oa_size,
BUS_SPACE_MAP_LINEAR,
&bh) != 0) {
panic("%s: can't map vmebusreg", device_xname(self));
}
sc->sc_reg = (struct vmebusreg *)bh;
if (bus_space_map(ia->iom_bustag,
(bus_addr_t) BUS_ADDR(ia->iom_reg[1].oa_space,
ia->iom_reg[1].oa_base),
(bus_size_t)ia->iom_reg[1].oa_size,
BUS_SPACE_MAP_LINEAR,
&bh) != 0) {
panic("%s: can't map vmebusvec", device_xname(self));
}
sc->sc_vec = (struct vmebusvec *)bh;
/*
* Map VME IO cache tags and flush control.
*/
if (bus_space_map(ia->iom_bustag,
(bus_addr_t) BUS_ADDR(
ia->iom_reg[1].oa_space,
ia->iom_reg[1].oa_base + VME_IOC_TAGOFFSET),
VME_IOC_SIZE,
BUS_SPACE_MAP_LINEAR,
&bh) != 0) {
panic("%s: can't map IOC tags", device_xname(self));
}
sc->sc_ioctags = (uint32_t *)bh;
if (bus_space_map(ia->iom_bustag,
(bus_addr_t) BUS_ADDR(
ia->iom_reg[1].oa_space,
ia->iom_reg[1].oa_base + VME_IOC_FLUSHOFFSET),
VME_IOC_SIZE,
BUS_SPACE_MAP_LINEAR,
&bh) != 0) {
panic("%s: can't map IOC flush registers", device_xname(self));
}
sc->sc_iocflush = (uint32_t *)bh;
/*
* Get "range" property.
*/
if (prom_getprop(node, "ranges", sizeof(struct rom_range),
&sc->sc_nrange, &sc->sc_range) != 0) {
panic("%s: can't get ranges property", device_xname(self));
}
sparcvme_sc = sc;
vmeerr_handler = sparc_vme_error;
/*
* Invalidate all IO-cache entries.
*/
for (cline = VME_IOC_SIZE/VME_IOC_LINESZ; cline > 0;) {
sc->sc_ioctags[--cline] = 0;
}
/* Enable IO-cache */
sc->sc_reg->vmebus_cr |= VMEBUS_CR_C;
printf(": version 0x%x\n",
sc->sc_reg->vmebus_cr & VMEBUS_CR_IMPL);
(void)config_found(self, &vba, 0);
#endif /* SUN4M */
}
void
tap_attach(device_t parent, device_t self, void *aux)
{
struct tap_softc *sc = device_private(self);
struct ifnet *ifp;
const struct sysctlnode *node;
int error;
uint8_t enaddr[ETHER_ADDR_LEN] =
{ 0xf2, 0x0b, 0xa4, 0xff, 0xff, 0xff };
char enaddrstr[3 * ETHER_ADDR_LEN];
sc->sc_dev = self;
sc->sc_sih = NULL;
getnanotime(&sc->sc_btime);
sc->sc_atime = sc->sc_mtime = sc->sc_btime;
sc->sc_flags = 0;
selinit(&sc->sc_rsel);
/*
* Initialize the two locks for the device.
*
* We need a lock here because even though the tap device can be
* opened only once, the file descriptor might be passed to another
* process, say a fork(2)ed child.
*
* The Giant saves us from most of the hassle, but since the read
* operation can sleep, we don't want two processes to wake up at
* the same moment and both try and dequeue a single packet.
*
* The queue for event listeners (used by kqueue(9), see below) has
* to be protected too, so use a spin lock.
*/
mutex_init(&sc->sc_rdlock, MUTEX_DEFAULT, IPL_NONE);
mutex_init(&sc->sc_kqlock, MUTEX_DEFAULT, IPL_VM);
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self, "couldn't establish power handler\n");
/*
* In order to obtain unique initial Ethernet address on a host,
* do some randomisation. It's not meant for anything but avoiding
* hard-coding an address.
*/
cprng_fast(&enaddr[3], 3);
aprint_verbose_dev(self, "Ethernet address %s\n",
ether_snprintf(enaddrstr, sizeof(enaddrstr), enaddr));
/*
* Why 1000baseT? Why not? You can add more.
*
* Note that there are 3 steps: init, one or several additions to
* list of supported media, and in the end, the selection of one
* of them.
*/
ifmedia_init(&sc->sc_im, 0, tap_mediachange, tap_mediastatus);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_1000_T, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_1000_T|IFM_FDX, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_100_TX, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_10_T, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
ifmedia_add(&sc->sc_im, IFM_ETHER|IFM_AUTO, 0, NULL);
ifmedia_set(&sc->sc_im, IFM_ETHER|IFM_AUTO);
/*
* One should note that an interface must do multicast in order
* to support IPv6.
*/
ifp = &sc->sc_ec.ec_if;
strcpy(ifp->if_xname, device_xname(self));
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = tap_ioctl;
ifp->if_start = tap_start;
ifp->if_stop = tap_stop;
ifp->if_init = tap_init;
IFQ_SET_READY(&ifp->if_snd);
sc->sc_ec.ec_capabilities = ETHERCAP_VLAN_MTU | ETHERCAP_JUMBO_MTU;
/* Those steps are mandatory for an Ethernet driver. */
if_initialize(ifp);
ether_ifattach(ifp, enaddr);
if_register(ifp);
/*
* Add a sysctl node for that interface.
*
* The pointer transmitted is not a string, but instead a pointer to
* the softc structure, which we can use to build the string value on
* the fly in the helper function of the node. See the comments for
* tap_sysctl_handler for details.
*
* Usually sysctl_createv is called with CTL_CREATE as the before-last
* component. However, we can allocate a number ourselves, as we are
* the only consumer of the net.link.<iface> node. In this case, the
* unit number is conveniently used to number the node. CTL_CREATE
* would just work, too.
*/
if ((error = sysctl_createv(NULL, 0, NULL,
&node, CTLFLAG_READWRITE,
CTLTYPE_STRING, device_xname(self), NULL,
tap_sysctl_handler, 0, (void *)sc, 18,
CTL_NET, AF_LINK, tap_node, device_unit(sc->sc_dev),
CTL_EOL)) != 0)
aprint_error_dev(self, "sysctl_createv returned %d, ignoring\n",
error);
}
/*
* Stop the adapter and free any mbufs allocated to the
* RX and TX lists.
*/
static void
kue_stop(struct kue_softc *sc)
{
usbd_status err;
struct ifnet *ifp;
int i;
DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__));
ifp = GET_IFP(sc);
ifp->if_timer = 0;
/* Stop transfers. */
if (sc->kue_ep[KUE_ENDPT_RX] != NULL) {
err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_RX]);
if (err) {
printf("%s: abort rx pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_RX]);
if (err) {
printf("%s: close rx pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
sc->kue_ep[KUE_ENDPT_RX] = NULL;
}
if (sc->kue_ep[KUE_ENDPT_TX] != NULL) {
err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_TX]);
if (err) {
printf("%s: abort tx pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_TX]);
if (err) {
printf("%s: close tx pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
sc->kue_ep[KUE_ENDPT_TX] = NULL;
}
if (sc->kue_ep[KUE_ENDPT_INTR] != NULL) {
err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_INTR]);
if (err) {
printf("%s: abort intr pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_INTR]);
if (err) {
printf("%s: close intr pipe failed: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
}
sc->kue_ep[KUE_ENDPT_INTR] = NULL;
}
/* Free RX resources. */
for (i = 0; i < KUE_RX_LIST_CNT; i++) {
if (sc->kue_cdata.kue_rx_chain[i].kue_xfer != NULL) {
usbd_free_xfer(sc->kue_cdata.kue_rx_chain[i].kue_xfer);
sc->kue_cdata.kue_rx_chain[i].kue_xfer = NULL;
}
}
/* Free TX resources. */
for (i = 0; i < KUE_TX_LIST_CNT; i++) {
if (sc->kue_cdata.kue_tx_chain[i].kue_xfer != NULL) {
usbd_free_xfer(sc->kue_cdata.kue_tx_chain[i].kue_xfer);
sc->kue_cdata.kue_tx_chain[i].kue_xfer = NULL;
}
}
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
}
static int
kue_load_fw(struct kue_softc *sc)
{
usb_device_descriptor_t dd;
usbd_status err;
DPRINTFN(1,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__));
/*
* First, check if we even need to load the firmware.
* If the device was still attached when the system was
* rebooted, it may already have firmware loaded in it.
* If this is the case, we don't need to do it again.
* And in fact, if we try to load it again, we'll hang,
* so we have to avoid this condition if we don't want
* to look stupid.
*
* We can test this quickly by checking the bcdRevision
* code. The NIC will return a different revision code if
* it's probed while the firmware is still loaded and
* running.
*/
if (usbd_get_device_desc(sc->kue_udev, &dd))
return (EIO);
if (UGETW(dd.bcdDevice) == KUE_WARM_REV) {
printf("%s: warm boot, no firmware download\n",
device_xname(sc->kue_dev));
return (0);
}
printf("%s: cold boot, downloading firmware\n",
device_xname(sc->kue_dev));
/* Load code segment */
DPRINTFN(1,("%s: kue_load_fw: download code_seg\n",
device_xname(sc->kue_dev)));
/*XXXUNCONST*/
err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_code_seg), sizeof(kue_code_seg));
if (err) {
printf("%s: failed to load code segment: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
return (EIO);
}
/* Load fixup segment */
DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n",
device_xname(sc->kue_dev)));
/*XXXUNCONST*/
err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_fix_seg), sizeof(kue_fix_seg));
if (err) {
printf("%s: failed to load fixup segment: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
return (EIO);
}
/* Send trigger command. */
DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n",
device_xname(sc->kue_dev)));
/*XXXUNCONST*/
err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_trig_seg), sizeof(kue_trig_seg));
if (err) {
printf("%s: failed to load trigger segment: %s\n",
device_xname(sc->kue_dev), usbd_errstr(err));
return (EIO);
}
usbd_delay_ms(sc->kue_udev, 10);
/*
* Reload device descriptor.
* Why? The chip without the firmware loaded returns
* one revision code. The chip with the firmware
* loaded and running returns a *different* revision
* code. This confuses the quirk mechanism, which is
* dependent on the revision data.
*/
(void)usbd_reload_device_desc(sc->kue_udev);
DPRINTFN(1,("%s: %s: done\n", device_xname(sc->kue_dev), __func__));
/* Reset the adapter. */
kue_reset(sc);
return (0);
}
Static void
umass_scsipi_cb(struct umass_softc *sc, void *priv, int residue, int status)
{
struct umass_scsipi_softc *scbus = (struct umass_scsipi_softc *)sc->bus;
struct scsipi_xfer *xs = priv;
struct scsipi_periph *periph = xs->xs_periph;
int cmdlen, senselen;
int s;
#ifdef UMASS_DEBUG
struct timeval tv;
u_int delta;
microtime(&tv);
delta = (tv.tv_sec - sc->tv.tv_sec) * 1000000 + tv.tv_usec - sc->tv.tv_usec;
#endif
DPRINTF(UDMASS_CMD,("umass_scsipi_cb: at %"PRIu64".%06"PRIu64", delta=%u: xs=%p residue=%d"
" status=%d\n", tv.tv_sec, (uint64_t)tv.tv_usec, delta, xs, residue, status));
xs->resid = residue;
switch (status) {
case STATUS_CMD_OK:
xs->error = XS_NOERROR;
break;
case STATUS_CMD_UNKNOWN:
/* FALLTHROUGH */
case STATUS_CMD_FAILED:
/* fetch sense data */
sc->sc_sense = 1;
memset(&scbus->sc_sense_cmd, 0, sizeof(scbus->sc_sense_cmd));
scbus->sc_sense_cmd.opcode = SCSI_REQUEST_SENSE;
scbus->sc_sense_cmd.byte2 = periph->periph_lun <<
SCSI_CMD_LUN_SHIFT;
if (sc->sc_cmd == UMASS_CPROTO_UFI ||
sc->sc_cmd == UMASS_CPROTO_ATAPI)
cmdlen = UFI_COMMAND_LENGTH; /* XXX */
else
cmdlen = sizeof(scbus->sc_sense_cmd);
if (periph->periph_version < 0x05) /* SPC-3 */
senselen = 18;
else
senselen = sizeof(xs->sense);
scbus->sc_sense_cmd.length = senselen;
sc->sc_methods->wire_xfer(sc, periph->periph_lun,
&scbus->sc_sense_cmd, cmdlen,
&xs->sense, senselen,
DIR_IN, xs->timeout, 0,
umass_scsipi_sense_cb, xs);
return;
case STATUS_WIRE_FAILED:
xs->error = XS_RESET;
break;
default:
panic("%s: Unknown status %d in umass_scsipi_cb",
device_xname(sc->sc_dev), status);
}
DPRINTF(UDMASS_CMD,("umass_scsipi_cb: at %"PRIu64".%06"PRIu64": return xs->error="
"%d, xs->xs_status=0x%x xs->resid=%d\n",
tv.tv_sec, (uint64_t)tv.tv_usec,
xs->error, xs->xs_status, xs->resid));
s = splbio();
KERNEL_LOCK(1, curlwp);
scsipi_done(xs);
KERNEL_UNLOCK_ONE(curlwp);
splx(s);
}
static void
sackbc_attach(device_t parent, device_t self, void *aux)
{
struct sackbc_softc *sc = device_private(self);
struct sacc_softc *psc = device_private(parent);
struct sa1111_attach_args *aa = (struct sa1111_attach_args *)aux;
device_t child;
uint32_t tmp, clock_bit;
int intr, slot;
switch (aa->sa_addr) {
case SACC_KBD0: clock_bit = (1<<6); intr = 21; break;
case SACC_KBD1: clock_bit = (1<<5); intr = 18; break;
default:
return;
}
if (aa->sa_size <= 0)
aa->sa_size = SACCKBD_SIZE;
if (aa->sa_intr == SACCCF_INTR_DEFAULT)
aa->sa_intr = intr;
sc->dev = self;
sc->iot = psc->sc_iot;
if (bus_space_subregion(psc->sc_iot, psc->sc_ioh,
aa->sa_addr, aa->sa_size, &sc->ioh)) {
aprint_normal(": can't map subregion\n");
return;
}
/* enable clock for PS/2 kbd or mouse */
tmp = bus_space_read_4(psc->sc_iot, psc->sc_ioh, SACCSC_SKPCR);
bus_space_write_4(psc->sc_iot, psc->sc_ioh, SACCSC_SKPCR,
tmp | clock_bit);
sc->ih_rx = NULL;
sc->intr = aa->sa_intr;
sc->polling = 0;
tmp = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_CR);
bus_space_write_4(sc->iot, sc->ioh, SACCKBD_CR, tmp | KBDCR_ENA);
/* XXX: this is necessary to get keyboard working. but I don't know why */
bus_space_write_4(sc->iot, sc->ioh, SACCKBD_CLKDIV, 2);
tmp = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT);
if ((tmp & KBDSTAT_ENA) == 0) {
printf("??? can't enable KBD controller\n");
return;
}
printf("\n");
sc->pt = pckbport_attach(sc, &sackbc_ops);
/*
* Although there is no such thing as SLOT for SA-1111 kbd
* controller, pckbd and pms drivers require it.
*/
for (slot = PCKBPORT_KBD_SLOT; slot <= PCKBPORT_AUX_SLOT; ++slot) {
child = pckbport_attach_slot(self, sc->pt, slot);
if (child == NULL)
continue;
sc->slot = slot;
rnd_attach_source(&sc->rnd_source, device_xname(child),
RND_TYPE_TTY, 0);
/* only one of KBD_SLOT or AUX_SLOT is used. */
break;
}
}
Static void
umass_scsipi_request(struct scsipi_channel *chan,
scsipi_adapter_req_t req, void *arg)
{
struct scsipi_adapter *adapt = chan->chan_adapter;
struct scsipi_periph *periph;
struct scsipi_xfer *xs;
struct umass_softc *sc = device_private(adapt->adapt_dev);
struct umass_scsipi_softc *scbus = (struct umass_scsipi_softc *)sc->bus;
struct scsipi_generic *cmd;
int cmdlen;
int dir;
#ifdef UMASS_DEBUG
microtime(&sc->tv);
#endif
switch(req) {
case ADAPTER_REQ_RUN_XFER:
xs = arg;
periph = xs->xs_periph;
DIF(UDMASS_UPPER, periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS);
DPRINTF(UDMASS_CMD, ("%s: umass_scsi_cmd: at %"PRIu64".%06"PRIu64": %d:%d "
"xs=%p cmd=0x%02x datalen=%d (quirks=0x%x, poll=%d)\n",
device_xname(sc->sc_dev), sc->tv.tv_sec, (uint64_t)sc->tv.tv_usec,
periph->periph_target, periph->periph_lun,
xs, xs->cmd->opcode, xs->datalen,
periph->periph_quirks, xs->xs_control & XS_CTL_POLL));
#if defined(UMASS_DEBUG) && defined(SCSIPI_DEBUG)
if (umassdebug & UDMASS_SCSI)
show_scsipi_xs(xs);
else if (umassdebug & ~UDMASS_CMD)
show_scsipi_cmd(xs);
#endif
if (sc->sc_dying) {
xs->error = XS_DRIVER_STUFFUP;
goto done;
}
#ifdef UMASS_DEBUG
if (SCSIPI_BUSTYPE_TYPE(chan->chan_bustype->bustype_type) ==
SCSIPI_BUSTYPE_ATAPI ?
periph->periph_target != UMASS_ATAPI_DRIVE :
periph->periph_target == chan->chan_id) {
DPRINTF(UDMASS_SCSI, ("%s: wrong SCSI ID %d\n",
device_xname(sc->sc_dev),
periph->periph_target));
xs->error = XS_DRIVER_STUFFUP;
goto done;
}
#endif
cmd = xs->cmd;
cmdlen = xs->cmdlen;
dir = DIR_NONE;
if (xs->datalen) {
switch (xs->xs_control &
(XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
case XS_CTL_DATA_IN:
dir = DIR_IN;
break;
case XS_CTL_DATA_OUT:
dir = DIR_OUT;
break;
}
}
if (xs->datalen > UMASS_MAX_TRANSFER_SIZE) {
printf("umass_cmd: large datalen, %d\n", xs->datalen);
xs->error = XS_DRIVER_STUFFUP;
goto done;
}
if (xs->xs_control & XS_CTL_POLL) {
/* Use sync transfer. XXX Broken! */
DPRINTF(UDMASS_SCSI,
("umass_scsi_cmd: sync dir=%d\n", dir));
scbus->sc_sync_status = USBD_INVAL;
sc->sc_methods->wire_xfer(sc, periph->periph_lun, cmd,
cmdlen, xs->data,
xs->datalen, dir,
xs->timeout, USBD_SYNCHRONOUS,
0, xs);
DPRINTF(UDMASS_SCSI, ("umass_scsi_cmd: done err=%d\n",
scbus->sc_sync_status));
switch (scbus->sc_sync_status) {
case USBD_NORMAL_COMPLETION:
xs->error = XS_NOERROR;
break;
case USBD_TIMEOUT:
xs->error = XS_TIMEOUT;
break;
default:
xs->error = XS_DRIVER_STUFFUP;
break;
}
goto done;
} else {
DPRINTF(UDMASS_SCSI,
("umass_scsi_cmd: async dir=%d, cmdlen=%d"
" datalen=%d\n",
dir, cmdlen, xs->datalen));
sc->sc_methods->wire_xfer(sc, periph->periph_lun, cmd,
cmdlen, xs->data,
xs->datalen, dir,
xs->timeout, 0,
umass_scsipi_cb, xs);
return;
}
/* Return if command finishes early. */
done:
KERNEL_LOCK(1, curlwp);
scsipi_done(xs);
KERNEL_UNLOCK_ONE(curlwp);
return;
default:
/* Not supported, nothing to do. */
;
}
}
void
apm_attach(struct apm_softc *sc)
{
u_int numbatts, capflags;
aprint_normal(": ");
switch ((APM_MAJOR_VERS(sc->sc_vers) << 8) + APM_MINOR_VERS(sc->sc_vers)) {
case 0x0100:
apm_v11_enabled = 0;
apm_v12_enabled = 0;
break;
case 0x0101:
apm_v12_enabled = 0;
/* fall through */
case 0x0102:
default:
break;
}
apm_set_ver(sc); /* prints version info */
aprint_normal("\n");
if (apm_minver >= 2)
(*sc->sc_ops->aa_get_capabilities)(sc->sc_cookie, &numbatts,
&capflags);
/*
* enable power management
*/
(*sc->sc_ops->aa_enable)(sc->sc_cookie, 1);
if (sc->sc_ops->aa_cpu_busy)
(*sc->sc_ops->aa_cpu_busy)(sc->sc_cookie);
mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE);
/* Initial state is `resumed'. */
sc->sc_power_state = PWR_RESUME;
selinit(&sc->sc_rsel);
selinit(&sc->sc_xsel);
/* Do an initial check. */
apm_periodic_check(sc);
/*
* Create a kernel thread to periodically check for APM events,
* and notify other subsystems when they occur.
*/
if (kthread_create(PRI_NONE, 0, NULL, apm_thread, sc,
&sc->sc_thread, "%s", device_xname(sc->sc_dev)) != 0) {
/*
* We were unable to create the APM thread; bail out.
*/
if (sc->sc_ops->aa_disconnect)
(*sc->sc_ops->aa_disconnect)(sc->sc_cookie);
aprint_error_dev(sc->sc_dev, "unable to create thread, "
"kernel APM support disabled\n");
}
if (!pmf_device_register(sc->sc_dev, NULL, NULL))
aprint_error_dev(sc->sc_dev, "couldn't establish power handler\n");
}
/*
* aha_cmd(iot, ioh, sc, icnt, ibuf, ocnt, obuf)
*
* Activate Adapter command
* icnt: number of args (outbound bytes including opcode)
* ibuf: argument buffer
* ocnt: number of expected returned bytes
* obuf: result buffer
* wait: number of seconds to wait for response
*
* Performs an adapter command through the ports. Not to be confused with a
* scsi command, which is read in via the DMA; one of the adapter commands
* tells it to read in a scsi command.
*/
static int
aha_cmd(bus_space_tag_t iot, bus_space_handle_t ioh, struct aha_softc *sc,
int icnt, u_char *ibuf, int ocnt, u_char *obuf)
{
const char *name;
int i;
int wait;
u_char sts;
u_char opcode = ibuf[0];
if (sc != NULL)
name = device_xname(&sc->sc_dev);
else
name = "(aha probe)";
/*
* Calculate a reasonable timeout for the command.
*/
switch (opcode) {
case AHA_INQUIRE_DEVICES:
wait = 90 * 20000;
break;
default:
wait = 1 * 20000;
break;
}
/*
* Wait for the adapter to go idle, unless it's one of
* the commands which don't need this
*/
if (opcode != AHA_MBO_INTR_EN) {
for (i = 20000; i; i--) { /* 1 sec? */
sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT);
if (sts & AHA_STAT_IDLE)
break;
delay(50);
}
if (!i) {
printf("%s: aha_cmd, host not idle(0x%x)\n",
name, sts);
return (1);
}
}
/*
* Now that it is idle, if we expect output, preflush the
* queue feeding to us.
*/
if (ocnt) {
while ((bus_space_read_1(iot, ioh, AHA_STAT_PORT)) & AHA_STAT_DF)
bus_space_read_1(iot, ioh, AHA_DATA_PORT);
}
/*
* Output the command and the number of arguments given
* for each byte, first check the port is empty.
*/
while (icnt--) {
for (i = wait; i; i--) {
sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT);
if (!(sts & AHA_STAT_CDF))
break;
delay(50);
}
if (!i) {
if (opcode != AHA_INQUIRE_REVISION)
printf("%s: aha_cmd, cmd/data port full\n", name);
bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_SRST);
return (1);
}
bus_space_write_1(iot, ioh, AHA_CMD_PORT, *ibuf++);
}
/*
* If we expect input, loop that many times, each time,
* looking for the data register to have valid data
*/
while (ocnt--) {
for (i = wait; i; i--) {
sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT);
if (sts & AHA_STAT_DF)
break;
delay(50);
}
if (!i) {
if (opcode != AHA_INQUIRE_REVISION)
printf("%s: aha_cmd, cmd/data port empty %d\n",
name, ocnt);
bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_SRST);
return (1);
}
*obuf++ = bus_space_read_1(iot, ioh, AHA_DATA_PORT);
}
/*
* Wait for the board to report a finished instruction.
* We may get an extra interrupt for the HACC signal, but this is
* unimportant.
*/
if (opcode != AHA_MBO_INTR_EN) {
for (i = 20000; i; i--) { /* 1 sec? */
sts = bus_space_read_1(iot, ioh, AHA_INTR_PORT);
/* XXX Need to save this in the interrupt handler? */
if (sts & AHA_INTR_HACC)
break;
delay(50);
}
if (!i) {
printf("%s: aha_cmd, host not finished(0x%x)\n",
name, sts);
return (1);
}
}
bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_IRST);
return (0);
}
static void
wi_pci_attach(struct device *parent, struct device *self, void *aux)
{
struct wi_pci_softc *psc = (struct wi_pci_softc *)self;
struct wi_softc *sc = &psc->psc_wi;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
const char *intrstr;
const struct wi_pci_product *wpp;
pci_intr_handle_t ih;
bus_space_tag_t memt, iot, plxt, tmdt;
bus_space_handle_t memh, ioh, plxh, tmdh;
psc->psc_pc = pc;
psc->psc_pcitag = pa->pa_tag;
wpp = wi_pci_lookup(pa);
#ifdef DIAGNOSTIC
if (wpp == NULL) {
printf("\n");
panic("wi_pci_attach: impossible");
}
#endif
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/* Map memory and I/O registers. */
if (pci_mapreg_map(pa, WI_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
&memt, &memh, NULL, NULL) != 0) {
printf(": can't map mem space\n");
return;
}
if (pci_mapreg_map(pa, WI_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
printf(": can't map I/O space\n");
return;
}
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
/* The PLX 9052 doesn't have IO at 0x14. Perhaps
other chips have, so we'll make this conditional. */
if (pci_mapreg_map(pa, WI_PCI_PLX_LOIO,
PCI_MAPREG_TYPE_IO, 0, &plxt,
&plxh, NULL, NULL) != 0) {
printf(": can't map PLX\n");
return;
}
}
break;
case CHIP_TMD_7160:
/* Used instead of PLX on at least one revision of
* the National Datacomm Corporation NCP130. Values
* for registers acquired from OpenBSD, which in
* turn got them from a Linux driver.
*/
/* Map COR and I/O registers. */
if (pci_mapreg_map(pa, WI_TMD_COR, PCI_MAPREG_TYPE_IO, 0,
&tmdt, &tmdh, NULL, NULL) != 0) {
printf(": can't map TMD\n");
return;
}
if (pci_mapreg_map(pa, WI_TMD_IO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
printf(": can't map I/O space\n");
return;
}
break;
default:
if (pci_mapreg_map(pa, WI_PCI_CBMA,
PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT,
0, &iot, &ioh, NULL, NULL) != 0) {
printf(": can't map mem space\n");
return;
}
memt = iot;
memh = ioh;
sc->sc_pci = 1;
break;
}
{
char devinfo[256];
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo));
printf(": %s (rev. 0x%02x)\n", devinfo,
PCI_REVISION(pa->pa_class));
}
sc->sc_enabled = 1;
sc->sc_enable = wi_pci_enable;
sc->sc_disable = wi_pci_disable;
sc->sc_iot = iot;
sc->sc_ioh = ioh;
/* Make sure interrupts are disabled. */
CSR_WRITE_2(sc, WI_INT_EN, 0);
CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
uint32_t command;
#define WI_LOCAL_INTCSR 0x4c
#define WI_LOCAL_INTEN 0x40 /* poke this into INTCSR */
command = bus_space_read_4(plxt, plxh, WI_LOCAL_INTCSR);
command |= WI_LOCAL_INTEN;
bus_space_write_4(plxt, plxh, WI_LOCAL_INTCSR, command);
}
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih);
psc->psc_ih = ih;
sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(self, "couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", device_xname(self), intrstr);
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/*
* Setup the PLX chip for level interrupts and config index 1
* XXX - should really reset the PLX chip too.
*/
bus_space_write_1(memt, memh,
WI_PLX_COR_OFFSET, WI_PLX_COR_VALUE);
break;
case CHIP_TMD_7160:
/* Enable I/O mode and level interrupts on the embedded
* card. The card's COR is the first byte of BAR 0.
*/
bus_space_write_1(tmdt, tmdh, 0, WI_COR_IOMODE);
break;
default:
/* reset HFA3842 MAC core */
wi_pci_reset(sc);
break;
}
printf("%s:", device_xname(self));
if (wi_attach(sc, 0) != 0) {
aprint_error_dev(self, "failed to attach controller\n");
pci_intr_disestablish(pa->pa_pc, sc->sc_ih);
return;
}
if (!wpp->wpp_chip)
sc->sc_reset = wi_pci_reset;
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self, "couldn't establish power handler\n");
else
pmf_class_network_register(self, &sc->sc_if);
}
/*
* Attach the interface. Allocate softc structures, do
* setup and ethernet/BPF attach.
*/
void
kue_attach(device_t parent, device_t self, void *aux)
{
struct kue_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
char *devinfop;
int s;
struct ifnet *ifp;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev));
sc->kue_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, KUE_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
sc->kue_udev = dev;
sc->kue_product = uaa->product;
sc->kue_vendor = uaa->vendor;
/* Load the firmware into the NIC. */
if (kue_load_fw(sc)) {
aprint_error_dev(self, "loading firmware failed\n");
return;
}
err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
sc->kue_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) {
aprint_error_dev(self, "missing endpoint\n");
return;
}
/* Read ethernet descriptor */
err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR,
0, &sc->kue_desc, sizeof(sc->kue_desc));
if (err) {
aprint_error_dev(self, "could not read Ethernet descriptor\n");
return;
}
sc->kue_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN,
M_USBDEV, M_NOWAIT);
if (sc->kue_mcfilters == NULL) {
aprint_error_dev(self,
"no memory for multicast filter buffer\n");
return;
}
s = splnet();
/*
* A KLSI chip was detected. Inform the world.
*/
aprint_normal_dev(self, "Ethernet address %s\n",
ether_sprintf(sc->kue_desc.kue_macaddr));
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = kue_ioctl;
ifp->if_start = kue_start;
ifp->if_watchdog = kue_watchdog;
strncpy(ifp->if_xname, device_xname(sc->kue_dev), IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, sc->kue_desc.kue_macaddr);
rnd_attach_source(&sc->rnd_source, device_xname(sc->kue_dev),
RND_TYPE_NET, RND_FLAG_DEFAULT);
sc->kue_attached = true;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->kue_udev,
sc->kue_dev);
return;
}
void
omapmputmr_attach(device_t parent, device_t self, void *aux)
{
struct omapmputmr_softc *sc = device_private(self);
struct tipb_attach_args *tipb = aux;
int ints_per_sec;
sc->sc_iot = tipb->tipb_iot;
sc->sc_intr = tipb->tipb_intr;
if (bus_space_map(tipb->tipb_iot, tipb->tipb_addr, tipb->tipb_size, 0,
&sc->sc_ioh))
panic("%s: Cannot map registers", device_xname(self));
switch (device_unit(self)) {
case 0:
clock_sc = sc;
ints_per_sec = hz;
break;
case 1:
stat_sc = sc;
ints_per_sec = profhz = stathz = STATHZ;
break;
case 2:
ref_sc = sc;
ints_per_sec = hz; /* Same rate as clock */
break;
default:
ints_per_sec = hz; /* Better value? */
break;
}
aprint_normal(": OMAP MPU Timer\n");
aprint_naive("\n");
/* Stop the timer from counting, but keep the timer module working. */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, MPU_CNTL_TIMER,
MPU_CLOCK_ENABLE);
timer_factors tf;
calc_timer_factors(ints_per_sec, &tf);
switch (device_unit(self)) {
case 0:
counts_per_hz = tf.reload + 1;
counts_per_usec = tf.counts_per_usec;
break;
case 2:
/*
* The microtime reference clock for all practical purposes
* just wraps around as an unsigned int.
*/
tf.reload = 0xffffffff;
break;
default:
break;
}
/* Set the reload value. */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, MPU_LOAD_TIMER, tf.reload);
/* Set the PTV and the other required bits and pieces. */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, MPU_CNTL_TIMER,
( MPU_CLOCK_ENABLE
| (tf.ptv << MPU_PTV_SHIFT)
| MPU_AR
| MPU_ST));
/* The clock is now running, but is not generating interrupts. */
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*/
static void
kue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct kue_chain *c = priv;
struct kue_softc *sc = c->kue_sc;
struct ifnet *ifp = GET_IFP(sc);
struct mbuf *m;
int total_len, pktlen;
int s;
DPRINTFN(10,("%s: %s: enter status=%d\n", device_xname(sc->kue_dev),
__func__, status));
if (sc->kue_dying)
return;
if (!(ifp->if_flags & IFF_RUNNING))
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
sc->kue_rx_errs++;
if (usbd_ratecheck(&sc->kue_rx_notice)) {
printf("%s: %u usb errors on rx: %s\n",
device_xname(sc->kue_dev), sc->kue_rx_errs,
usbd_errstr(status));
sc->kue_rx_errs = 0;
}
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->kue_ep[KUE_ENDPT_RX]);
goto done;
}
usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
DPRINTFN(10,("%s: %s: total_len=%d len=%d\n", device_xname(sc->kue_dev),
__func__, total_len,
le16dec(c->kue_buf)));
if (total_len <= 1)
goto done;
pktlen = le16dec(c->kue_buf);
if (pktlen > total_len - 2)
pktlen = total_len - 2;
if (pktlen < ETHER_MIN_LEN - ETHER_CRC_LEN ||
pktlen > MCLBYTES - ETHER_ALIGN) {
ifp->if_ierrors++;
goto done;
}
/* No errors; receive the packet. */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
ifp->if_ierrors++;
goto done;
}
if (pktlen > MHLEN - ETHER_ALIGN) {
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
ifp->if_ierrors++;
goto done;
}
}
m->m_data += ETHER_ALIGN;
/* copy data to mbuf */
memcpy(mtod(m, uint8_t *), c->kue_buf + 2, pktlen);
ifp->if_ipackets++;
m->m_pkthdr.len = m->m_len = pktlen;
m->m_pkthdr.rcvif = ifp;
s = splnet();
/*
* Handle BPF listeners. Let the BPF user see the packet, but
* don't pass it up to the ether_input() layer unless it's
* a broadcast packet, multicast packet, matches our ethernet
* address or the interface is in promiscuous mode.
*/
bpf_mtap(ifp, m);
DPRINTFN(10,("%s: %s: deliver %d\n", device_xname(sc->kue_dev),
__func__, m->m_len));
(*ifp->if_input)(ifp, m);
splx(s);
done:
/* Setup new transfer. */
usbd_setup_xfer(c->kue_xfer, sc->kue_ep[KUE_ENDPT_RX],
c, c->kue_buf, KUE_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, kue_rxeof);
usbd_transfer(c->kue_xfer);
DPRINTFN(10,("%s: %s: start rx\n", device_xname(sc->kue_dev),
__func__));
}
static void
igma_attach(device_t parent, device_t self, void *aux)
{
struct igma_softc *sc = device_private(self);
const struct pci_attach_args *pa = (struct pci_attach_args *)aux;
struct igma_attach_args iaa;
bus_space_tag_t gttmmt, gmt, regt;
bus_space_handle_t gttmmh, gmh, regh;
bus_addr_t gttmmb, gmb;
pci_aprint_devinfo(pa, NULL);
sc->sc_dev = self;
/* Initialize according to chip type */
igma_product_to_chip(pa, &sc->sc_chip);
if (pci_mapreg_map(pa, PCI_BAR0, PCI_MAPREG_TYPE_MEM,
BUS_SPACE_MAP_LINEAR,
>tmmt, >tmmh, >tmmb, NULL)) {
aprint_error_dev(sc->sc_dev, "unable to map GTTMM\n");
return;
}
sc->sc_chip.mmiot = gttmmt;
if (bus_space_subregion(gttmmt, gttmmh, 0, 2*1024*1024,
&sc->sc_chip.mmioh)) {
aprint_error_dev(sc->sc_dev, "unable to submap MMIO\n");
return;
}
sc->sc_chip.gttt = gttmmt;
if (bus_space_subregion(gttmmt, gttmmh, 2*1024*1024, 2*1024*1024,
&sc->sc_chip.gtth)) {
aprint_error_dev(sc->sc_dev, "unable to submap GTT\n");
return;
}
if (pci_mapreg_map(pa, PCI_BAR2, PCI_MAPREG_TYPE_MEM,
BUS_SPACE_MAP_LINEAR | BUS_SPACE_MAP_PREFETCHABLE,
&gmt, &gmh, &gmb, NULL)) {
aprint_error_dev(sc->sc_dev, "unable to map aperture\n");
return;
}
sc->sc_chip.gmt = gmt;
sc->sc_chip.gmh = gmh;
sc->sc_chip.gmb = gmb;
if (pci_mapreg_map(pa, PCI_BAR4, PCI_MAPREG_TYPE_IO, 0,
®t, ®h, NULL, NULL)) {
aprint_error_dev(sc->sc_dev, "unable to map IO registers\n");
return;
}
#if NVGA > 0
iaa.iaa_console = vga_cndetach() ? true : false;
#else
iaa.iaa_console = 0;
#endif
sc->sc_chip.vgat = regt;
if (bus_space_map(regt, 0x3c0, 0x10, 0, &sc->sc_chip.vgah)) {
aprint_error_dev(sc->sc_dev, "unable to map VGA registers\n");
return;
}
/* Check hardware for more information */
igma_adjust_chip(sc, &sc->sc_chip);
aprint_normal("%s: VGA_CNTRL: 0x%x\n",device_xname(sc->sc_dev),
sc->sc_chip.vga_cntrl);
aprint_normal("%s: GPIO_OFFSET: 0x%x\n",device_xname(sc->sc_dev),
sc->sc_chip.gpio_offset);
aprint_normal("%s: BACKLIGHT_CTRL: 0x%x\n",device_xname(sc->sc_dev),
sc->sc_chip.backlight_cntrl);
aprint_normal("%s: BACKLIGHT_CTRL2: 0x%x\n",device_xname(sc->sc_dev),
sc->sc_chip.backlight_cntrl2);
#if NIGMAFB > 0
strcpy(iaa.iaa_name, "igmafb");
iaa.iaa_chip = sc->sc_chip;
config_found_ia(sc->sc_dev, "igmabus", &iaa, igma_print);
#endif
igma_i2c_attach(sc);
}
static void
kue_init(void *xsc)
{
struct kue_softc *sc = xsc;
struct ifnet *ifp = GET_IFP(sc);
int s;
uint8_t eaddr[ETHER_ADDR_LEN];
DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__));
if (ifp->if_flags & IFF_RUNNING)
return;
s = splnet();
memcpy(eaddr, CLLADDR(ifp->if_sadl), sizeof(eaddr));
/* Set MAC address */
kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MAC, 0, eaddr, ETHER_ADDR_LEN);
sc->kue_rxfilt = KUE_RXFILT_UNICAST | KUE_RXFILT_BROADCAST;
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC)
sc->kue_rxfilt |= KUE_RXFILT_PROMISC;
kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt);
/* I'm not sure how to tune these. */
#if 0
/*
* Leave this one alone for now; setting it
* wrong causes lockups on some machines/controllers.
*/
kue_setword(sc, KUE_CMD_SET_SOFS, 1);
#endif
kue_setword(sc, KUE_CMD_SET_URB_SIZE, 64);
/* Init TX ring. */
if (kue_tx_list_init(sc) == ENOBUFS) {
printf("%s: tx list init failed\n", device_xname(sc->kue_dev));
splx(s);
return;
}
/* Init RX ring. */
if (kue_rx_list_init(sc) == ENOBUFS) {
printf("%s: rx list init failed\n", device_xname(sc->kue_dev));
splx(s);
return;
}
/* Load the multicast filter. */
kue_setmulti(sc);
if (sc->kue_ep[KUE_ENDPT_RX] == NULL) {
if (kue_open_pipes(sc)) {
splx(s);
return;
}
}
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
splx(s);
}
static void
ahd_pci_attach(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa = aux;
struct ahd_softc *ahd = device_private(self);
const struct ahd_pci_identity *entry;
uint32_t devconfig;
pcireg_t command;
int error;
pcireg_t subid;
uint16_t subvendor;
pcireg_t reg;
int ioh_valid, ioh2_valid, memh_valid;
pcireg_t memtype;
pci_intr_handle_t ih;
const char *intrstr;
struct ahd_pci_busdata *bd;
ahd->sc_dev = self;
ahd_set_name(ahd, device_xname(self));
ahd->parent_dmat = pa->pa_dmat;
command = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
subid = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
entry = ahd_find_pci_device(pa->pa_id, subid);
if (entry == NULL)
return;
/* Keep information about the PCI bus */
bd = malloc(sizeof (struct ahd_pci_busdata), M_DEVBUF, M_NOWAIT);
if (bd == NULL) {
aprint_error("%s: unable to allocate bus-specific data\n",
ahd_name(ahd));
return;
}
memset(bd, 0, sizeof(struct ahd_pci_busdata));
bd->pc = pa->pa_pc;
bd->tag = pa->pa_tag;
bd->func = pa->pa_function;
bd->dev = pa->pa_device;
ahd->bus_data = bd;
ahd->description = entry->name;
ahd->seep_config = malloc(sizeof(*ahd->seep_config),
M_DEVBUF, M_NOWAIT);
if (ahd->seep_config == NULL) {
aprint_error("%s: cannot malloc seep_config!\n", ahd_name(ahd));
return;
}
memset(ahd->seep_config, 0, sizeof(*ahd->seep_config));
LIST_INIT(&ahd->pending_scbs);
ahd_timer_init(&ahd->reset_timer);
ahd_timer_init(&ahd->stat_timer);
ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A
| AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A;
ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT;
ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT;
ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT;
ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT;
ahd->int_coalescing_stop_threshold =
AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT;
if (ahd_platform_alloc(ahd, NULL) != 0) {
ahd_free(ahd);
return;
}
/*
* Record if this is an HP board.
*/
subvendor = PCI_VENDOR(subid);
if (subvendor == SUBID_HP)
ahd->flags |= AHD_HP_BOARD;
error = entry->setup(ahd, pa);
if (error != 0)
return;
devconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG);
if ((devconfig & PCIXINITPAT) == PCIXINIT_PCI33_66) {
ahd->chip |= AHD_PCI;
/* Disable PCIX workarounds when running in PCI mode. */
ahd->bugs &= ~AHD_PCIX_BUG_MASK;
} else {
ahd->chip |= AHD_PCIX;
}
ahd->bus_description = pci_bus_modes[PCI_BUS_MODES_INDEX(devconfig)];
memh_valid = ioh_valid = ioh2_valid = 0;
if (!pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PCIX,
&bd->pcix_off, NULL)) {
if (ahd->chip & AHD_PCIX)
aprint_error_dev(self,
"warning: can't find PCI-X capability\n");
ahd->chip &= ~AHD_PCIX;
ahd->chip |= AHD_PCI;
ahd->bugs &= ~AHD_PCIX_BUG_MASK;
}
/*
* Map PCI Registers
*/
if ((ahd->bugs & AHD_PCIX_MMAPIO_BUG) == 0) {
memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
AHD_PCI_MEMADDR);
switch (memtype) {
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
memh_valid = (pci_mapreg_map(pa, AHD_PCI_MEMADDR,
memtype, 0, &ahd->tags[0],
&ahd->bshs[0],
NULL, NULL) == 0);
if (memh_valid) {
ahd->tags[1] = ahd->tags[0];
bus_space_subregion(ahd->tags[0], ahd->bshs[0],
/*offset*/0x100,
/*size*/0x100,
&ahd->bshs[1]);
if (ahd_pci_test_register_access(ahd) != 0)
memh_valid = 0;
}
break;
default:
memh_valid = 0;
aprint_error("%s: unknown memory type: 0x%x\n",
ahd_name(ahd), memtype);
break;
}
if (memh_valid) {
command &= ~PCI_COMMAND_IO_ENABLE;
pci_conf_write(pa->pa_pc, pa->pa_tag,
PCI_COMMAND_STATUS_REG, command);
}
#ifdef AHD_DEBUG
printf("%s: doing memory mapping shs0 0x%lx, shs1 0x%lx\n",
ahd_name(ahd), ahd->bshs[0], ahd->bshs[1]);
#endif
}
if (command & PCI_COMMAND_IO_ENABLE) {
/* First BAR */
ioh_valid = (pci_mapreg_map(pa, AHD_PCI_IOADDR,
PCI_MAPREG_TYPE_IO, 0,
&ahd->tags[0], &ahd->bshs[0],
NULL, NULL) == 0);
/* 2nd BAR */
ioh2_valid = (pci_mapreg_map(pa, AHD_PCI_IOADDR1,
PCI_MAPREG_TYPE_IO, 0,
&ahd->tags[1], &ahd->bshs[1],
NULL, NULL) == 0);
if (ioh_valid && ioh2_valid) {
KASSERT(memh_valid == 0);
command &= ~PCI_COMMAND_MEM_ENABLE;
pci_conf_write(pa->pa_pc, pa->pa_tag,
PCI_COMMAND_STATUS_REG, command);
}
#ifdef AHD_DEBUG
printf("%s: doing io mapping shs0 0x%lx, shs1 0x%lx\n",
ahd_name(ahd), ahd->bshs[0], ahd->bshs[1]);
#endif
}
if (memh_valid == 0 && (ioh_valid == 0 || ioh2_valid == 0)) {
aprint_error("%s: unable to map registers\n", ahd_name(ahd));
return;
}
aprint_normal("\n");
aprint_naive("\n");
/* power up chip */
if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
pci_activate_null)) && error != EOPNOTSUPP) {
aprint_error_dev(self, "cannot activate %d\n", error);
return;
}
/*
* Should we bother disabling 39Bit addressing
* based on installed memory?
*/
if (sizeof(bus_addr_t) > 4)
ahd->flags |= AHD_39BIT_ADDRESSING;
/*
* If we need to support high memory, enable dual
* address cycles. This bit must be set to enable
* high address bit generation even if we are on a
* 64bit bus (PCI64BIT set in devconfig).
*/
if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
uint32_t dvconfig;
aprint_normal("%s: Enabling 39Bit Addressing\n", ahd_name(ahd));
dvconfig = pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG);
dvconfig |= DACEN;
pci_conf_write(pa->pa_pc, pa->pa_tag, DEVCONFIG, dvconfig);
}
/* Ensure busmastering is enabled */
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
reg | PCI_COMMAND_MASTER_ENABLE);
ahd_softc_init(ahd);
/*
* Map the interrupt routines
*/
ahd->bus_intr = ahd_pci_intr;
error = ahd_reset(ahd, /*reinit*/FALSE);
if (error != 0) {
ahd_free(ahd);
return;
}
if (pci_intr_map(pa, &ih)) {
aprint_error("%s: couldn't map interrupt\n", ahd_name(ahd));
ahd_free(ahd);
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
ahd->ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahd_intr, ahd);
if (ahd->ih == NULL) {
aprint_error("%s: couldn't establish interrupt",
ahd_name(ahd));
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
ahd_free(ahd);
return;
}
if (intrstr != NULL)
aprint_normal("%s: interrupting at %s\n", ahd_name(ahd),
intrstr);
/* Get the size of the cache */
ahd->pci_cachesize = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
ahd->pci_cachesize *= 4;
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
/* See if we have a SEEPROM and perform auto-term */
error = ahd_check_extport(ahd);
if (error != 0)
return;
/* Core initialization */
error = ahd_init(ahd);
if (error != 0)
return;
/*
* Link this softc in with all other ahd instances.
*/
ahd_attach(ahd);
}
static int
kue_ioctl(struct ifnet *ifp, u_long command, void *data)
{
struct kue_softc *sc = ifp->if_softc;
struct ifaddr *ifa = (struct ifaddr *)data;
struct ifreq *ifr = (struct ifreq *)data;
int s, error = 0;
DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__));
if (sc->kue_dying)
return (EIO);
s = splnet();
switch(command) {
case SIOCINITIFADDR:
ifp->if_flags |= IFF_UP;
kue_init(sc);
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
arp_ifinit(ifp, ifa);
break;
#endif /* INET */
}
break;
case SIOCSIFMTU:
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU)
error = EINVAL;
else if ((error = ifioctl_common(ifp, command, data)) == ENETRESET)
error = 0;
break;
case SIOCSIFFLAGS:
if ((error = ifioctl_common(ifp, command, data)) != 0)
break;
if (ifp->if_flags & IFF_UP) {
if (ifp->if_flags & IFF_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->kue_if_flags & IFF_PROMISC)) {
sc->kue_rxfilt |= KUE_RXFILT_PROMISC;
kue_setword(sc, KUE_CMD_SET_PKT_FILTER,
sc->kue_rxfilt);
} else if (ifp->if_flags & IFF_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->kue_if_flags & IFF_PROMISC) {
sc->kue_rxfilt &= ~KUE_RXFILT_PROMISC;
kue_setword(sc, KUE_CMD_SET_PKT_FILTER,
sc->kue_rxfilt);
} else if (!(ifp->if_flags & IFF_RUNNING))
kue_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
kue_stop(sc);
}
sc->kue_if_flags = ifp->if_flags;
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
error = ether_ioctl(ifp, command, data);
if (error == ENETRESET) {
if (ifp->if_flags & IFF_RUNNING)
kue_setmulti(sc);
error = 0;
}
break;
default:
error = ether_ioctl(ifp, command, data);
break;
}
splx(s);
return (error);
}
/*
* Perform a read of "Device Status Jump" register and update the
* status if necessary. If status is read, the given "ecmd" is also
* performed, unless "ecmd" is zero. Returns DSJ value, -1 on failure
* and -2 on "temporary" failure.
*/
int
mtreaddsj(struct mt_softc *sc, int ecmd)
{
int retval;
if (sc->sc_flags & MTF_STATTIMEO)
goto getstats;
retval = gpibrecv(sc->sc_ic,
(sc->sc_flags & MTF_DSJTIMEO) ? -1 : sc->sc_slave,
MTT_DSJ, &(sc->sc_lastdsj), 1);
sc->sc_flags &= ~MTF_DSJTIMEO;
if (retval != 1) {
DPRINTF(MDB_ANY, ("%s can't gpibrecv DSJ",
device_xname(sc->sc_dev)));
if (sc->sc_recvtimeo == 0)
sc->sc_recvtimeo = hz;
if (--sc->sc_recvtimeo == 0)
return (-1);
if (retval == 0)
sc->sc_flags |= MTF_DSJTIMEO;
return (-2);
}
sc->sc_recvtimeo = 0;
sc->sc_statindex = 0;
DPRINTF(MDB_ANY, ("%s readdsj: 0x%x", device_xname(sc->sc_dev),
sc->sc_lastdsj));
sc->sc_lastecmd = ecmd;
switch (sc->sc_lastdsj) {
case 0:
if (ecmd & MTE_DSJ_FORCE)
break;
return (0);
case 2:
sc->sc_lastecmd = MTE_COMPLETE;
case 1:
break;
default:
printf("%s readdsj: DSJ 0x%x\n", device_xname(sc->sc_dev),
sc->sc_lastdsj);
return (-1);
}
getstats:
retval = gpibrecv(sc->sc_ic,
(sc->sc_flags & MTF_STATCONT) ? -1 : sc->sc_slave, MTT_STAT,
((char *)&(sc->sc_stat)) + sc->sc_statindex,
sizeof(sc->sc_stat) - sc->sc_statindex);
sc->sc_flags &= ~(MTF_STATTIMEO | MTF_STATCONT);
if (retval != sizeof(sc->sc_stat) - sc->sc_statindex) {
if (sc->sc_recvtimeo == 0)
sc->sc_recvtimeo = hz;
if (--sc->sc_recvtimeo != 0) {
if (retval >= 0) {
sc->sc_statindex += retval;
sc->sc_flags |= MTF_STATCONT;
}
sc->sc_flags |= MTF_STATTIMEO;
return (-2);
}
printf("%s readdsj: can't read status", device_xname(sc->sc_dev));
return (-1);
}
sc->sc_recvtimeo = 0;
sc->sc_statindex = 0;
DPRINTF(MDB_ANY, ("%s readdsj: status is %x %x %x %x %x %x",
device_xname(sc->sc_dev),
sc->sc_stat1, sc->sc_stat2, sc->sc_stat3,
sc->sc_stat4, sc->sc_stat5, sc->sc_stat6));
if (sc->sc_lastecmd)
(void) gpibsend(sc->sc_ic, sc->sc_slave,
MTL_ECMD, &(sc->sc_lastecmd), 1);
return ((int) sc->sc_lastdsj);
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*/
static void
vr_rxeof(struct vr_softc *sc)
{
struct mbuf *m;
struct ifnet *ifp;
struct vr_desc *d;
struct vr_descsoft *ds;
int i, total_len;
uint32_t rxstat;
ifp = &sc->vr_ec.ec_if;
for (i = sc->vr_rxptr;; i = VR_NEXTRX(i)) {
d = VR_CDRX(sc, i);
ds = VR_DSRX(sc, i);
VR_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
rxstat = le32toh(d->vr_status);
if (rxstat & VR_RXSTAT_OWN) {
/*
* We have processed all of the receive buffers.
*/
break;
}
/*
* If an error occurs, update stats, clear the
* status word and leave the mbuf cluster in place:
* it should simply get re-used next time this descriptor
* comes up in the ring.
*/
if (rxstat & VR_RXSTAT_RXERR) {
const char *errstr;
ifp->if_ierrors++;
switch (rxstat & 0x000000FF) {
case VR_RXSTAT_CRCERR:
errstr = "crc error";
break;
case VR_RXSTAT_FRAMEALIGNERR:
errstr = "frame alignment error";
break;
case VR_RXSTAT_FIFOOFLOW:
errstr = "FIFO overflow";
break;
case VR_RXSTAT_GIANT:
errstr = "received giant packet";
break;
case VR_RXSTAT_RUNT:
errstr = "received runt packet";
break;
case VR_RXSTAT_BUSERR:
errstr = "system bus error";
break;
case VR_RXSTAT_BUFFERR:
errstr = "rx buffer error";
break;
default:
errstr = "unknown rx error";
break;
}
printf("%s: receive error: %s\n", device_xname(sc->vr_dev),
errstr);
VR_INIT_RXDESC(sc, i);
continue;
} else if (!(rxstat & VR_RXSTAT_FIRSTFRAG) ||
!(rxstat & VR_RXSTAT_LASTFRAG)) {
/*
* This driver expects to receive whole packets every
* time. In case we receive a fragment that is not
* a complete packet, we discard it.
*/
ifp->if_ierrors++;
printf("%s: receive error: incomplete frame; "
"size = %d, status = 0x%x\n",
device_xname(sc->vr_dev),
VR_RXBYTES(le32toh(d->vr_status)), rxstat);
VR_INIT_RXDESC(sc, i);
continue;
}
bus_dmamap_sync(sc->vr_dmat, ds->ds_dmamap, 0,
ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
/* No errors; receive the packet. */
total_len = VR_RXBYTES(le32toh(d->vr_status));
#ifdef DIAGNOSTIC
if (total_len == 0) {
/*
* If we receive a zero-length packet, we probably
* missed to handle an error condition above.
* Discard it to avoid a later crash.
*/
ifp->if_ierrors++;
printf("%s: receive error: zero-length packet; "
"status = 0x%x\n",
device_xname(sc->vr_dev), rxstat);
VR_INIT_RXDESC(sc, i);
continue;
}
#endif
/*
* The Rhine chip includes the CRC with every packet.
* Trim it off here.
*/
total_len -= ETHER_CRC_LEN;
#ifdef __NO_STRICT_ALIGNMENT
/*
* If the packet is small enough to fit in a
* single header mbuf, allocate one and copy
* the data into it. This greatly reduces
* memory consumption when we receive lots
* of small packets.
*
* Otherwise, we add a new buffer to the receive
* chain. If this fails, we drop the packet and
* recycle the old buffer.
*/
if (vr_copy_small != 0 && total_len <= MHLEN) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
goto dropit;
memcpy(mtod(m, void *),
mtod(ds->ds_mbuf, void *), total_len);
VR_INIT_RXDESC(sc, i);
bus_dmamap_sync(sc->vr_dmat, ds->ds_dmamap, 0,
ds->ds_dmamap->dm_mapsize,
BUS_DMASYNC_PREREAD);
} else {
static void
dec_3000_300_device_register(device_t dev, void *aux)
{
static int found, initted, scsiboot, netboot;
static device_t scsidev;
static device_t tcdsdev;
struct bootdev_data *b = bootdev_data;
device_t parent = device_parent(dev);
if (found)
return;
if (!initted) {
scsiboot = (strcmp(b->protocol, "SCSI") == 0);
netboot = (strcmp(b->protocol, "BOOTP") == 0) ||
(strcmp(b->protocol, "MOP") == 0);
#if 0
printf("scsiboot = %d, netboot = %d\n", scsiboot, netboot);
#endif
initted = 1;
}
/*
* for scsi boot, we look for "tcds", make sure it has the
* right slot number, then find the "asc" on this tcds that
* as the right channel. then we find the actual scsi
* device we came from. note: no SCSI LUN support (yet).
*/
if (scsiboot && device_is_a(dev, "tcds")) {
struct tc_attach_args *tcargs = aux;
if (b->slot != tcargs->ta_slot)
return;
tcdsdev = dev;
#if 0
printf("\ntcdsdev = %s\n", device_xname(dev));
#endif
}
if (scsiboot && tcdsdev &&
device_is_a(dev, "asc")) {
struct tcdsdev_attach_args *ta = aux;
if (parent != tcdsdev)
return;
if (ta->tcdsda_chip != b->channel)
return;
scsidev = dev;
#if 0
printf("\nscsidev = %s\n", device_xname(dev));
#endif
}
if (scsiboot && scsidev &&
(device_is_a(dev, "sd") ||
device_is_a(dev, "st") ||
device_is_a(dev, "cd"))) {
struct scsipibus_attach_args *sa = aux;
if (device_parent(parent) != scsidev)
return;
if (b->unit / 100 != sa->sa_periph->periph_target)
return;
/* XXX LUN! */
switch (b->boot_dev_type) {
case 0:
if (!device_is_a(dev, "sd") &&
!device_is_a(dev, "cd"))
return;
break;
case 1:
if (!device_is_a(dev, "st"))
return;
break;
default:
return;
}
/* we've found it! */
booted_device = dev;
#if 0
printf("\nbooted_device = %s\n", device_xname(booted_device));
#endif
found = 1;
}
if (netboot) {
if (b->slot == 5 && device_is_a(dev, "le") &&
device_is_a(parent, "ioasic")) {
/*
* no need to check ioasic_attach_args, since only
* one le on ioasic.
*/
booted_device = dev;
#if 0
printf("\nbooted_device = %s\n", device_xname(booted_device));
#endif
found = 1;
return;
}
/*
* XXX GENERIC SUPPORT FOR TC NETWORK BOARDS
*/
}
}
static int
maxrtc_clock_write(struct maxrtc_softc *sc, struct clock_ymdhms *dt)
{
uint8_t bcd[MAX6900_BURST_LEN], cmdbuf[2];
uint8_t init_seconds, final_seconds;
int i;
/*
* Convert our time representation into something the MAX6900
* can understand.
*/
bcd[MAX6900_BURST_SECOND] = TOBCD(dt->dt_sec);
bcd[MAX6900_BURST_MINUTE] = TOBCD(dt->dt_min);
bcd[MAX6900_BURST_HOUR] = TOBCD(dt->dt_hour) & MAX6900_HOUR_24MASK;
bcd[MAX6900_BURST_DATE] = TOBCD(dt->dt_day);
bcd[MAX6900_BURST_WDAY] = TOBCD(dt->dt_wday);
bcd[MAX6900_BURST_MONTH] = TOBCD(dt->dt_mon);
bcd[MAX6900_BURST_YEAR] = TOBCD(dt->dt_year % 100);
/* century in control slot */
bcd[MAX6900_BURST_CONTROL] = TOBCD(dt->dt_year / 100);
if (iic_acquire_bus(sc->sc_tag, I2C_F_POLL)) {
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to acquire I2C bus\n");
return (0);
}
/* Start by clearing the control register's write-protect bit. */
cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE;
cmdbuf[1] = 0;
if (iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address,
cmdbuf, 1, &cmdbuf[1], 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to clear WP bit\n");
return (0);
}
/*
* The MAX6900 RTC manual recommends ensuring "atomicity" of
* a non-burst write by:
*
* - writing SECONDS
* - reading back SECONDS, remembering it as "initial seconds"
* - write the remaing RTC registers
* - read back SECONDS as "final seconds"
* - if "initial seconds" == 59, ensure "final seconds" == 59
* - else, ensure "final seconds" is no more than one second
* beyond "initial seconds".
*/
again:
cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_WRITE;
if (iic_exec(sc->sc_tag, I2C_OP_WRITE, sc->sc_address,
cmdbuf, 1, &bcd[MAX6900_BURST_SECOND], 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to write SECONDS\n");
return (0);
}
cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_READ;
if (iic_exec(sc->sc_tag, I2C_OP_READ, sc->sc_address,
cmdbuf, 1, &init_seconds, 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to read "
"INITIAL SECONDS\n");
return (0);
}
for (i = 1; i < MAX6900_BURST_LEN; i++) {
cmdbuf[0] = max6900_rtc_offset[i] | MAX6900_CMD_WRITE;
if (iic_exec(sc->sc_tag,
i != MAX6900_BURST_LEN - 1 ? I2C_OP_WRITE :
I2C_OP_WRITE_WITH_STOP, sc->sc_address,
cmdbuf, 1, &bcd[i], 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to write rtc "
" at 0x%x\n",
max6900_rtc_offset[i]);
return (0);
}
}
cmdbuf[0] = MAX6900_REG_SECOND | MAX6900_CMD_READ;
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_address,
cmdbuf, 1, &final_seconds, 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to read "
"FINAL SECONDS\n");
return (0);
}
if ((init_seconds == 59 && final_seconds != 59) ||
(init_seconds != 59 && final_seconds != init_seconds + 1)) {
#if 1
printf("%s: maxrtc_clock_write: init %d, final %d, try again\n",
device_xname(sc->sc_dev), init_seconds, final_seconds);
#endif
goto again;
}
/* Finish by setting the control register's write-protect bit. */
cmdbuf[0] = MAX6900_REG_CONTROL | MAX6900_CMD_WRITE;
cmdbuf[1] = MAX6900_CONTROL_WP;
if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_address,
cmdbuf, 1, &cmdbuf[1], 1, I2C_F_POLL)) {
iic_release_bus(sc->sc_tag, I2C_F_POLL);
aprint_error_dev(sc->sc_dev,
"maxrtc_clock_write: failed to set WP bit\n");
return (0);
}
iic_release_bus(sc->sc_tag, I2C_F_POLL);
return (1);
}
void
spif_softintr(void *vsc)
{
struct spif_softc *sc = (struct spif_softc *)vsc;
struct stty_softc *stc = sc->sc_ttys;
int i, data, s, flags;
uint8_t stat, msvr;
struct stty_port *sp;
struct tty *tp;
if (stc != NULL) {
for (i = 0; i < stc->sc_nports; i++) {
sp = &stc->sc_port[i];
tp = sp->sp_tty;
if (!ISSET(tp->t_state, TS_ISOPEN))
continue;
while (sp->sp_rget != sp->sp_rput) {
stat = sp->sp_rget[0];
data = sp->sp_rget[1];
sp->sp_rget += 2;
if (sp->sp_rget == sp->sp_rend)
sp->sp_rget = sp->sp_rbuf;
if (stat & (CD180_RCSR_BE | CD180_RCSR_FE))
data |= TTY_FE;
if (stat & CD180_RCSR_PE)
data |= TTY_PE;
(*tp->t_linesw->l_rint)(data, tp);
}
s = splhigh();
flags = sp->sp_flags;
CLR(sp->sp_flags, STTYF_DONE | STTYF_CDCHG |
STTYF_RING_OVERFLOW);
splx(s);
if (ISSET(flags, STTYF_CDCHG)) {
s = spltty();
STC_WRITE(sc, STC_CAR, i);
msvr = STC_READ(sc, STC_MSVR);
splx(s);
sp->sp_carrier = msvr & CD180_MSVR_CD;
(*tp->t_linesw->l_modem)(tp,
sp->sp_carrier);
}
if (ISSET(flags, STTYF_RING_OVERFLOW)) {
log(LOG_WARNING, "%s-%x: ring overflow\n",
device_xname(stc->sc_dev), i);
}
if (ISSET(flags, STTYF_DONE)) {
ndflush(&tp->t_outq,
sp->sp_txp - tp->t_outq.c_cf);
CLR(tp->t_state, TS_BUSY);
(*tp->t_linesw->l_start)(tp);
}
}
}
}
/* ARGSUSED */
void
ie_pcctwo_attach(device_t parent, device_t self, void *aux)
{
struct pcctwo_attach_args *pa;
struct ie_pcctwo_softc *ps;
struct ie_softc *sc;
bus_dma_segment_t seg;
int rseg;
pa = aux;
ps = device_private(self);
sc = &ps->ps_ie;
sc->sc_dev = self;
/* Map the MPU controller registers in PCCTWO space */
ps->ps_bust = pa->pa_bust;
bus_space_map(pa->pa_bust, pa->pa_offset, IE_MPUREG_SIZE,
0, &ps->ps_bush);
/* Get contiguous DMA-able memory for the IE chip */
if (bus_dmamem_alloc(pa->pa_dmat, ether_data_buff_size, PAGE_SIZE, 0,
&seg, 1, &rseg,
BUS_DMA_NOWAIT | BUS_DMA_ONBOARD_RAM | BUS_DMA_24BIT) != 0) {
aprint_error_dev(self, "Failed to allocate ether buffer\n");
return;
}
if (bus_dmamem_map(pa->pa_dmat, &seg, rseg, ether_data_buff_size,
(void **) & sc->sc_maddr, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) {
aprint_error_dev(self, "Failed to map ether buffer\n");
bus_dmamem_free(pa->pa_dmat, &seg, rseg);
return;
}
sc->bt = pa->pa_bust;
sc->bh = (bus_space_handle_t) sc->sc_maddr; /* XXXSCW Better way? */
sc->sc_iobase = (void *) seg.ds_addr;
sc->sc_msize = ether_data_buff_size;
memset(sc->sc_maddr, 0, ether_data_buff_size);
sc->hwreset = ie_reset;
sc->hwinit = ie_hwinit;
sc->chan_attn = ie_atten;
sc->intrhook = ie_intrhook;
sc->memcopyin = ie_copyin;
sc->memcopyout = ie_copyout;
sc->ie_bus_barrier = NULL;
sc->ie_bus_read16 = ie_read_16;
sc->ie_bus_write16 = ie_write_16;
sc->ie_bus_write24 = ie_write_24;
sc->sc_mediachange = NULL;
sc->sc_mediastatus = NULL;
sc->scp = 0;
sc->iscp = sc->scp + ((IE_SCP_SZ + 15) & ~15);
sc->scb = sc->iscp + IE_ISCP_SZ;
sc->buf_area = sc->scb + IE_SCB_SZ;
sc->buf_area_sz = sc->sc_msize - (sc->buf_area - sc->scp);
/*
* BUS_USE -> Interrupt Active High (edge-triggered),
* Lock function enabled,
* Internal bus throttle timer triggering,
* 82586 operating mode.
*/
ie_write_16(sc, IE_SCP_BUS_USE(sc->scp), IE_BUS_USE);
ie_write_24(sc, IE_SCP_ISCP(sc->scp), sc->iscp);
ie_write_16(sc, IE_ISCP_SCB(sc->iscp), sc->scb);
ie_write_24(sc, IE_ISCP_BASE(sc->iscp), sc->scp);
/* This has the side-effect of resetting the chip */
i82586_proberam(sc);
/* Attach the MI back-end */
i82586_attach(sc, "onboard", mvme_ea, NULL, 0, 0);
/* Register the event counter */
evcnt_attach_dynamic(&ps->ps_evcnt, EVCNT_TYPE_INTR,
pcctwointr_evcnt(pa->pa_ipl), "ether", device_xname(self));
/* Finally, hook the hardware interrupt */
pcctwointr_establish(PCCTWOV_LANC_IRQ, i82586_intr, pa->pa_ipl, sc,
&ps->ps_evcnt);
}
/*---------------------------------------------------------------------------*
* HSCX IRQ Handler
*---------------------------------------------------------------------------*/
void
isic_hscx_irq(register struct isic_softc *sc, u_char ista, int h_chan, u_char ex_irq)
{
register l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
u_char exir = 0;
int activity = -1;
u_char cmd = 0;
NDBGL1(L1_H_IRQ, "%#x", ista);
if(ex_irq)
{
/* get channel extended irq reg */
exir = HSCX_READ(h_chan, H_EXIR);
if(exir & HSCX_EXIR_RFO)
{
chan->stat_RFO++;
NDBGL1(L1_H_XFRERR, "ex_irq: receive data overflow");
}
if((exir & HSCX_EXIR_XDU) && (chan->bprot != BPROT_NONE))/* xmit data underrun */
{
chan->stat_XDU++;
NDBGL1(L1_H_XFRERR, "ex_irq: xmit data underrun");
isic_hscx_cmd(sc, h_chan, HSCX_CMDR_XRES);
if (chan->out_mbuf_head != NULL) /* don't continue to transmit this buffer */
{
i4b_Bfreembuf(chan->out_mbuf_head);
chan->out_mbuf_cur = chan->out_mbuf_head = NULL;
}
}
}
/* rx message end, end of frame */
if(ista & HSCX_ISTA_RME)
{
register int fifo_data_len;
u_char rsta;
int error = 0;
rsta = HSCX_READ(h_chan, H_RSTA);
if((rsta & 0xf0) != 0xa0)
{
if((rsta & HSCX_RSTA_VFR) == 0)
{
chan->stat_VFR++;
cmd |= (HSCX_CMDR_RHR);
NDBGL1(L1_H_XFRERR, "received invalid Frame");
error++;
}
if(rsta & HSCX_RSTA_RDO)
{
chan->stat_RDO++;
NDBGL1(L1_H_XFRERR, "receive data overflow");
error++;
}
if((rsta & HSCX_RSTA_CRC) == 0)
{
chan->stat_CRC++;
cmd |= (HSCX_CMDR_RHR);
NDBGL1(L1_H_XFRERR, "CRC check failed");
error++;
}
if(rsta & HSCX_RSTA_RAB)
{
chan->stat_RAB++;
NDBGL1(L1_H_XFRERR, "Receive message aborted");
error++;
}
}
fifo_data_len = ((HSCX_READ(h_chan, H_RBCL)) &
((sc->sc_bfifolen)-1));
if(fifo_data_len == 0)
fifo_data_len = sc->sc_bfifolen;
/* all error conditions checked, now decide and take action */
if(error == 0)
{
if(chan->in_mbuf == NULL)
{
if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
panic("L1 isic_hscx_irq: RME, cannot allocate mbuf!");
chan->in_cbptr = chan->in_mbuf->m_data;
chan->in_len = 0;
}
fifo_data_len -= 1; /* last byte in fifo is RSTA ! */
if((chan->in_len + fifo_data_len) <= BCH_MAX_DATALEN)
{
/* read data from HSCX fifo */
HSCX_RDFIFO(h_chan, chan->in_cbptr, fifo_data_len);
cmd |= (HSCX_CMDR_RMC);
isic_hscx_cmd(sc, h_chan, cmd);
cmd = 0;
chan->in_len += fifo_data_len;
chan->rxcount += fifo_data_len;
/* setup mbuf data length */
chan->in_mbuf->m_len = chan->in_len;
chan->in_mbuf->m_pkthdr.len = chan->in_len;
if(sc->sc_trace & TRACE_B_RX)
{
i4b_trace_hdr hdr;
hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_NT;
hdr.count = ++sc->sc_trace_bcount;
isdn_layer2_trace_ind(&sc->sc_l2, sc->sc_l3token, &hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data);
}
(*chan->l4_driver->bch_rx_data_ready)(chan->l4_driver_softc);
activity = ACT_RX;
/* mark buffer ptr as unused */
chan->in_mbuf = NULL;
chan->in_cbptr = NULL;
chan->in_len = 0;
}
else
{
NDBGL1(L1_H_XFRERR, "RAWHDLC rx buffer overflow in RME, in_len=%d, fifolen=%d", chan->in_len, fifo_data_len);
chan->in_cbptr = chan->in_mbuf->m_data;
chan->in_len = 0;
cmd |= (HSCX_CMDR_RHR | HSCX_CMDR_RMC);
}
}
else
{
if (chan->in_mbuf != NULL)
{
i4b_Bfreembuf(chan->in_mbuf);
chan->in_mbuf = NULL;
chan->in_cbptr = NULL;
chan->in_len = 0;
}
cmd |= (HSCX_CMDR_RMC);
}
}
/* rx fifo full */
if(ista & HSCX_ISTA_RPF)
{
if(chan->in_mbuf == NULL)
{
if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
panic("L1 isic_hscx_irq: RPF, cannot allocate mbuf!");
chan->in_cbptr = chan->in_mbuf->m_data;
chan->in_len = 0;
}
chan->rxcount += sc->sc_bfifolen;
if((chan->in_len + sc->sc_bfifolen) <= BCH_MAX_DATALEN)
{
/* read data from HSCX fifo */
HSCX_RDFIFO(h_chan, chan->in_cbptr, sc->sc_bfifolen);
chan->in_cbptr += sc->sc_bfifolen;
chan->in_len += sc->sc_bfifolen;
}
else
{
if(chan->bprot == BPROT_NONE)
{
/* setup mbuf data length */
chan->in_mbuf->m_len = chan->in_len;
chan->in_mbuf->m_pkthdr.len = chan->in_len;
if(sc->sc_trace & TRACE_B_RX)
{
i4b_trace_hdr hdr;
hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_NT;
hdr.count = ++sc->sc_trace_bcount;
isdn_layer2_trace_ind(&sc->sc_l2, sc->sc_l3token, &hdr,chan->in_mbuf->m_len, chan->in_mbuf->m_data);
}
/* silence detection */
if(!(isdn_bchan_silence(chan->in_mbuf->m_data, chan->in_mbuf->m_len)))
activity = ACT_RX;
if(!(IF_QFULL(&chan->rx_queue)))
{
IF_ENQUEUE(&chan->rx_queue, chan->in_mbuf);
}
else
{
i4b_Bfreembuf(chan->in_mbuf);
}
/* signal upper driver that data is available */
(*chan->l4_driver->bch_rx_data_ready)(chan->l4_driver_softc);
/* alloc new buffer */
if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
panic("L1 isic_hscx_irq: RPF, cannot allocate new mbuf!");
/* setup new data ptr */
chan->in_cbptr = chan->in_mbuf->m_data;
/* read data from HSCX fifo */
HSCX_RDFIFO(h_chan, chan->in_cbptr, sc->sc_bfifolen);
chan->in_cbptr += sc->sc_bfifolen;
chan->in_len = sc->sc_bfifolen;
chan->rxcount += sc->sc_bfifolen;
}
else
{
NDBGL1(L1_H_XFRERR, "RAWHDLC rx buffer overflow in RPF, in_len=%d", chan->in_len);
chan->in_cbptr = chan->in_mbuf->m_data;
chan->in_len = 0;
cmd |= (HSCX_CMDR_RHR);
}
}
/* command to release fifo space */
cmd |= HSCX_CMDR_RMC;
}
/* transmit fifo empty, new data can be written to fifo */
if(ista & HSCX_ISTA_XPR)
{
/*
* for a description what is going on here, please have
* a look at isic_bchannel_start() in i4b_bchan.c !
*/
int len;
int nextlen;
NDBGL1(L1_H_IRQ, "%s, chan %d - XPR, Tx Fifo Empty!", device_xname(sc->sc_dev), h_chan);
if(chan->out_mbuf_cur == NULL) /* last frame is transmitted */
{
IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head);
if(chan->out_mbuf_head == NULL)
{
chan->state &= ~HSCX_TX_ACTIVE;
(*chan->l4_driver->bch_tx_queue_empty)(chan->l4_driver_softc);
}
else
{
chan->state |= HSCX_TX_ACTIVE;
chan->out_mbuf_cur = chan->out_mbuf_head;
chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data;
chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len;
if(sc->sc_trace & TRACE_B_TX)
{
i4b_trace_hdr hdr;
hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_TE;
hdr.count = ++sc->sc_trace_bcount;
isdn_layer2_trace_ind(&sc->sc_l2, sc->sc_l3token, &hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data);
}
if(chan->bprot == BPROT_NONE)
{
if(!(isdn_bchan_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len)))
activity = ACT_TX;
}
else
{
activity = ACT_TX;
}
}
}
len = 0;
while(chan->out_mbuf_cur && len != sc->sc_bfifolen)
{
nextlen = min(chan->out_mbuf_cur_len, sc->sc_bfifolen - len);
#ifdef NOTDEF
printf("i:mh=%x, mc=%x, mcp=%x, mcl=%d l=%d nl=%d # ",
chan->out_mbuf_head,
chan->out_mbuf_cur,
chan->out_mbuf_cur_ptr,
chan->out_mbuf_cur_len,
len,
next_len);
#endif
isic_hscx_waitxfw(sc, h_chan); /* necessary !!! */
HSCX_WRFIFO(h_chan, chan->out_mbuf_cur_ptr, nextlen);
cmd |= HSCX_CMDR_XTF;
len += nextlen;
chan->txcount += nextlen;
chan->out_mbuf_cur_ptr += nextlen;
chan->out_mbuf_cur_len -= nextlen;
if(chan->out_mbuf_cur_len == 0)
{
if((chan->out_mbuf_cur = chan->out_mbuf_cur->m_next) != NULL)
{
chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data;
chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len;
if(sc->sc_trace & TRACE_B_TX)
{
i4b_trace_hdr hdr;
hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_TE;
hdr.count = ++sc->sc_trace_bcount;
isdn_layer2_trace_ind(&sc->sc_l2, sc->sc_l3token, &hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data);
}
}
else
{
if (chan->bprot != BPROT_NONE)
cmd |= HSCX_CMDR_XME;
i4b_Bfreembuf(chan->out_mbuf_head);
chan->out_mbuf_head = NULL;
}
}
}
}
if(cmd) /* is there a command for the HSCX ? */
{
isic_hscx_cmd(sc, h_chan, cmd); /* yes, to HSCX */
}
/* call timeout handling routine */
if(activity == ACT_RX || activity == ACT_TX)
(*chan->l4_driver->bch_activity)(chan->l4_driver_softc, activity);
}
Static int
url_openpipes(struct url_softc *sc)
{
struct url_chain *c;
usbd_status err;
int i;
int error = 0;
if (sc->sc_dying)
return (EIO);
sc->sc_refcnt++;
/* Open RX pipe */
err = usbd_open_pipe(sc->sc_ctl_iface, sc->sc_bulkin_no,
USBD_EXCLUSIVE_USE, &sc->sc_pipe_rx);
if (err) {
printf("%s: open rx pipe failed: %s\n",
device_xname(sc->sc_dev), usbd_errstr(err));
error = EIO;
goto done;
}
/* Open TX pipe */
err = usbd_open_pipe(sc->sc_ctl_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_pipe_tx);
if (err) {
printf("%s: open tx pipe failed: %s\n",
device_xname(sc->sc_dev), usbd_errstr(err));
error = EIO;
goto done;
}
#if 0
/* XXX: interrupt endpoint is not yet supported */
/* Open Interrupt pipe */
err = usbd_open_pipe_intr(sc->sc_ctl_iface, sc->sc_intrin_no,
USBD_EXCLUSIVE_USE, &sc->sc_pipe_intr, sc,
&sc->sc_cdata.url_ibuf, URL_INTR_PKGLEN,
url_intr, USBD_DEFAULT_INTERVAL);
if (err) {
printf("%s: open intr pipe failed: %s\n",
device_xname(sc->sc_dev), usbd_errstr(err));
error = EIO;
goto done;
}
#endif
/* Start up the receive pipe. */
for (i = 0; i < URL_RX_LIST_CNT; i++) {
c = &sc->sc_cdata.url_rx_chain[i];
usbd_setup_xfer(c->url_xfer, sc->sc_pipe_rx,
c, c->url_buf, URL_BUFSZ,
USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, url_rxeof);
(void)usbd_transfer(c->url_xfer);
DPRINTF(("%s: %s: start read\n", device_xname(sc->sc_dev),
__func__));
}
done:
if (--sc->sc_refcnt < 0)
usb_detach_wakeupold(sc->sc_dev);
return (error);
}
