void IRsend::sendVOLTAS(unsigned long address,unsigned long data)
{
enableIROut(38);
mark(VOLTAS_HDR_MARK);
space(VOLTAS_HDR_SPACE);
address <<= 12;
for (int i = 0; i < 20; i++) {
if (address & TOPBIT) {
mark(VOLTAS_BIT_MARK);
space(VOLTAS_ONE_SPACE);
}
else {
mark(VOLTAS_BIT_MARK);
space(VOLTAS_ZERO_SPACE);
}
address <<= 1;
}
for (int i = 0; i < 32; i++) {
if (data & TOPBIT) {
mark(VOLTAS_BIT_MARK);
space(VOLTAS_ONE_SPACE);
}
else {
mark(VOLTAS_BIT_MARK);
space(VOLTAS_ZERO_SPACE);
}
data <<= 1;
}
mark(VOLTAS_BIT_MARK);
space(VOLTAS_HDR_SPACE);
mark(VOLTAS_BIT_MARK);
space(0);
}
/*
* Most of the protocols have a header consisting of a mark/space of a particular length followed by
* a series of variable length mark/space signals. Depending on the protocol they very the lengths of the
* mark or the space to indicate a data bit of "0" or "1". Most also end with a stop bit of "1".
* The basic structure of the sending and decoding these protocols led to lots of redundant code.
* Therefore I have implemented generic sending and decoding routines. You just need to pass a bunch of customized
* parameters and it does the work. This reduces compiled code size with only minor speed degradation.
* You may be able to implement additional protocols by simply passing the proper values to these generic routines.
* The decoding routines do not encode stop bits. So you have to tell this routine whether or not to send one.
*/
void IRsendBase::sendGeneric(unsigned long data, unsigned char Num_Bits, unsigned int Head_Mark, unsigned int Head_Space,
unsigned int Mark_One, unsigned int Mark_Zero, unsigned int Space_One, unsigned int Space_Zero,
unsigned char kHz, bool Use_Stop, unsigned long Max_Extent) {
Extent=0;
data = data << (32 - Num_Bits);
enableIROut(kHz);
//Some protocols do not send a header when sending repeat codes. So we pass a zero value to indicate skipping this.
if(Head_Mark) mark(Head_Mark);
if(Head_Space) space(Head_Space);
for (int i = 0; i <Num_Bits; i++) {
if (data & TOPBIT) {
mark(Mark_One); space(Space_One);
}
else {
mark(Mark_Zero); space(Space_Zero);
}
data <<= 1;
}
if(Use_Stop) mark(Mark_One); //stop bit of "1"
if(Max_Extent) {
#ifdef IRLIB_TRACE
Serial.print("Max_Extent="); Serial.println(Max_Extent);
Serial.print("Extent="); Serial.println(Extent);
Serial.print("Difference="); Serial.println(Max_Extent-Extent);
#endif
space(Max_Extent-Extent);
}
else space(Space_One);
};
void IRsend::sendRC6 (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(36);
// Header
mark(RC6_HDR_MARK);
space(RC6_HDR_SPACE);
// Start bit
mark(RC6_T1);
space(RC6_T1);
// Data
for (unsigned long i = 1, mask = 1UL << (nbits - 1); mask; i++, mask >>= 1) {
// The fourth bit we send is a "double width trailer bit"
int t = (i == 4) ? (RC6_T1 * 2) : (RC6_T1) ;
if (data & mask) {
mark(t);
space(t);
} else {
space(t);
mark(t);
}
}
space(0); // Always end with the LED off
}
void IRsendRC6::send(unsigned long data, unsigned char nbits)
{
enableIROut(36);
data = data << (32 - nbits);
Extent=0;
mark(RC6_HDR_MARK); space(RC6_HDR_SPACE);
mark(RC6_T1); space(RC6_T1);// start bit "1"
int t;
for (int i = 0; i < nbits; i++) {
if (i == 3) {
t = 2 * RC6_T1; // double-wide trailer bit
}
else {
t = RC6_T1;
}
if (data & TOPBIT) {
mark(t); space(t);//"1" is a Mark/space
}
else {
space(t); mark(t);//"0" is a space/Mark
}
data <<= 1;
}
space(107000-Extent); // Turn off at end
}
void setup() {
DDRD |= 0b01000000; // ������� ���������
PORTD &= 0b10111111; // ������� ���������
DDRD |= 0b00100000; // ����� �������
PORTD &= 0b11011111; // ����� �������
DDRD |= 0b00010000; // ��������� ��
PORTD &= 0b11101111; // ��������� ��
DDRD &= 0b11111011; // ������
PORTD |= 0b00000100; // ������
enableIROut(56);
enableIRIn();
//���������� ��� ���� ISCxx
//����������� �� ������������ INT0 �� ������� ������
MCUCR &= ~( (1<<ISC11)|(1<<ISC10)|(1<<ISC01)|(1<<ISC00) );
//��������� ������� ���������� INT0
GICR |= (1<<INT0);
//���������� ���� ����������� ���������� ����������
PT_INIT(&ptIRReceive);
PT_INIT(&ptWaitForTrigger);
PT_INIT(&ptExplode);
PT_INIT(&ptFinder);
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
}
//Modified Samsung TV send code found in comments on http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
void IRsend::sendSamsung(unsigned long data, int nbits)
{
enableIROut(38);
mark(SAMSUNG_HDR_MARK);
space(SAMSUNG_HDR_SPACE);
if (data == REPEAT)
{
mark(SAMSUNG_BIT_MARK);
space(SAMSUNG_ZERO_SPACE);
}
else
{
for (int i = 0; i < nbits; i++)
{
if (data & TOPBIT) {
mark(SAMSUNG_BIT_MARK);
space(SAMSUNG_ONE_SPACE);
}
else {
mark(SAMSUNG_BIT_MARK);
space(SAMSUNG_ZERO_SPACE);
}
data <<= 1;
}
}
mark(SAMSUNG_BIT_MARK);
space(0);
}
void IRsend::sendPanasonic (unsigned int address, unsigned long data)
{
// Set IR carrier frequency
enableIROut(35);
// Header
mark(PANASONIC_HDR_MARK);
space(PANASONIC_HDR_SPACE);
// Address
for (unsigned long mask = 1UL << (16 - 1); mask; mask >>= 1) {
mark(PANASONIC_BIT_MARK);
if (address & mask) space(PANASONIC_ONE_SPACE) ;
else space(PANASONIC_ZERO_SPACE) ;
}
// Data
for (unsigned long mask = 1UL << (32 - 1); mask; mask >>= 1) {
mark(PANASONIC_BIT_MARK);
if (data & mask) space(PANASONIC_ONE_SPACE) ;
else space(PANASONIC_ZERO_SPACE) ;
}
// Footer
mark(PANASONIC_BIT_MARK);
space(0); // Always end with the LED off
}
// Send a Gree Heat Pump message.
//
// Args:
// data: The raw message to be sent.
// nbits: Nr. of bits of data in the message. (Default is GREE_BITS)
// repeat: Nr. of times the message is to be repeated. (Default = 0).
//
// Status: ALPHA / Untested.
//
// Ref:
// https://github.com/ToniA/arduino-heatpumpir/blob/master/GreeHeatpumpIR.cpp
void IRsend::sendGree(uint64_t data, uint16_t nbits, uint16_t repeat) {
if (nbits != GREE_BITS)
return; // Wrong nr. of bits to send a proper message.
// Set IR carrier frequency
enableIROut(38);
for (uint16_t r = 0; r <= repeat; r++) {
// Header
mark(GREE_HDR_MARK);
space(GREE_HDR_SPACE);
// Data
for (int16_t i = 8; i <= nbits; i += 8) {
sendData(GREE_BIT_MARK, GREE_ONE_SPACE, GREE_BIT_MARK, GREE_ZERO_SPACE,
(data >> (nbits - i)) & 0xFF, 8, false);
if (i == nbits / 2) {
// Send the mid-message Footer.
sendData(GREE_BIT_MARK, GREE_ONE_SPACE, GREE_BIT_MARK, GREE_ZERO_SPACE,
0b010, 3);
mark(GREE_BIT_MARK);
space(GREE_MSG_SPACE);
}
}
// Footer
mark(GREE_BIT_MARK);
space(GREE_MSG_SPACE);
}
}
// Calculate & set any offsets to account for execution times.
//
// Args:
// hz: The frequency to calibrate at >= 1000Hz. Default is 38000Hz.
//
// Status: ALPHA / Untested.
//
// NOTE:
// This will generate an 65535us mark() IR LED signal.
// This only needs to be called once, if at all.
void IRsend::calibrate(uint16_t hz) {
if (hz < 1000) // Were we given kHz? Supports the old call usage.
hz *= 1000;
periodOffset = 0; // Turn off any existing offset while we calibrate.
enableIROut(hz);
IRtimer usecTimer = IRtimer(); // Start a timer *just* before we do the call.
uint16_t pulses = mark(UINT16_MAX); // Generate a PWM of 65,535 us. (Max.)
uint32_t timeTaken = usecTimer.elapsed(); // Record the time it took.
// While it shouldn't be neccesary, assume at least 1 pulse, to avoid a
// divide by 0 situation.
pulses = std::max(pulses, (uint16_t) 1U);
uint32_t calcPeriod = calcUSecPeriod(hz); // e.g. @38kHz it should be 26us.
// Assuming 38kHz for the example calculations:
// In a 65535us pulse, we should have 2520.5769 pulses @ 26us periods.
// e.g. 65535.0us / 26us = 2520.5769
// This should have caused approx 2520 loops through the main loop in mark().
// The average over that many interations should give us a reasonable
// approximation at what offset we need to use to account for instruction
// execution times.
//
// Calculate the actual period from the actual time & the actual pulses
// generated.
double_t actualPeriod = (double_t) timeTaken / (double_t) pulses;
// Store the difference between the actual time per period vs. calculated.
periodOffset = (int8_t) ((double_t) calcPeriod - actualPeriod);
}
void IRsend::sendSharp(unsigned long data, int nbits) {
unsigned long invertdata = data ^ SHARP_TOGGLE_MASK;
enableIROut(38);
for (int i = 0; i < nbits; i++) {
if (data & 0x4000) {
mark(SHARP_BIT_MARK);
space(SHARP_ONE_SPACE);
}
else {
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
}
data <<= 1;
}
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
delay(46);
for (int i = 0; i < nbits; i++) {
if (invertdata & 0x4000) {
mark(SHARP_BIT_MARK);
space(SHARP_ONE_SPACE);
}
else {
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
}
invertdata <<= 1;
}
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
delay(46);
}
// Send a Philips RC-MM packet.
//
// Args:
// data: The data we want to send. MSB first.
// nbits: The number of bits of data to send. (Typically 12, 24, or 32[Nokia])
// repeat: The nr. of times the message should be sent.
//
// Status: BETA / Should be working.
//
// Ref:
// http://www.sbprojects.com/knowledge/ir/rcmm.php
void IRsend::sendRCMM(uint64_t data, uint16_t nbits, uint16_t repeat) {
// Set 36kHz IR carrier frequency & a 1/3 (33%) duty cycle.
enableIROut(36, 33);
IRtimer usecs = IRtimer();
for (uint16_t r = 0; r <= repeat; r++) {
usecs.reset();
// Header
mark(RCMM_HDR_MARK);
space(RCMM_HDR_SPACE);
// Data
uint64_t mask = 0b11ULL << (nbits - 2);
// RC-MM sends data 2 bits at a time.
for (int32_t i = nbits; i > 0; i -= 2) {
mark(RCMM_BIT_MARK);
// Grab the next Most Significant Bits to send.
switch ((data & mask) >> (i - 2)) {
case 0b00: space(RCMM_BIT_SPACE_0); break;
case 0b01: space(RCMM_BIT_SPACE_1); break;
case 0b10: space(RCMM_BIT_SPACE_2); break;
case 0b11: space(RCMM_BIT_SPACE_3); break;
}
mask >>= 2;
}
// Footer
mark(RCMM_BIT_MARK);
// Protocol requires us to wait at least RCMM_RPT_LENGTH usecs from the
// start or RCMM_MIN_GAP usecs.
space(std::max(RCMM_RPT_LENGTH - usecs.elapsed(), RCMM_MIN_GAP));
}
}
// Caller needs to take care of flipping the toggle bit
void IRsend::sendRC6(unsigned long data, int nbits)
{
enableIROut(36);
data = data << (32 - nbits);
mark(RC6_HDR_MARK);
space(RC6_HDR_SPACE);
mark(RC6_T1); // start bit
space(RC6_T1);
int t;
for (int i = 0; i < nbits; i++) {
if (i == 3) {
// double-wide trailer bit
t = 2 * RC6_T1;
}
else {
t = RC6_T1;
}
if (data & TOPBIT) {
mark(t);
space(t);
}
else {
space(t);
mark(t);
}
data <<= 1;
}
space(0); // Turn off at end
}
void IRsend::sendSamsung2(unsigned int address, unsigned long data) {
enableIROut(38);
mark(SAMSUNG2_HDR_MARK);
space(SAMSUNG2_HDR_SPACE);
for(int i=0;i<16;i++)
{
mark(SAMSUNG2_BIT_MARK);
if (address & 0x8000) {
space(SAMSUNG2_ONE_SPACE);
} else {
space(SAMSUNG2_ZERO_SPACE);
}
address <<= 1;
}
mark(SAMSUNG2_BIT_MARK);
space(SAMSUNG2_HDR_SPACE);
for (int i=0; i < (20); i++) {
mark(SAMSUNG2_BIT_MARK);
if (data & TOPBIT) {
space(SAMSUNG2_ONE_SPACE);
} else {
space(SAMSUNG2_ZERO_SPACE);
}
data <<= 1;
}
mark(SAMSUNG2_BIT_MARK);
space(0);
}
void IRsend::sendPanasonic(unsigned int address, unsigned long data) {
enableIROut(35);
mark(PANASONIC_HDR_MARK);
space(PANASONIC_HDR_SPACE);
for(int i=0;i<16;i++)
{
mark(PANASONIC_BIT_MARK);
if (address & 0x8000) {
space(PANASONIC_ONE_SPACE);
} else {
space(PANASONIC_ZERO_SPACE);
}
address <<= 1;
}
for (int i=0; i < 32; i++) {
mark(PANASONIC_BIT_MARK);
if (data & TOPBIT) {
space(PANASONIC_ONE_SPACE);
} else {
space(PANASONIC_ZERO_SPACE);
}
data <<= 1;
}
mark(PANASONIC_BIT_MARK);
space(0);
}
void IRsend::sendApple(unsigned long data, int nbits,int repeat){
enableIROut(38);
if (repeat == 0) {
mark(APPLE_HDR_MARK);
space(APPLE_HDR_SPACE);
} else {
mark(APPLE_REPEAT_MARK);
space(APPLE_REPEAT_SPACE);
}
//PRE DATA
unsigned long pre_data = 0x77E1;
pre_data <<= 16;
for (int i = 0; i < 16; i++) {
if (pre_data & TOPBIT) {
mark(APPLE_ONE_MARK);
space(APPLE_ONE_SPACE);
}
else {
mark(APPLE_ONE_MARK);
space(APPLE_ZERO_SPACE);
}
pre_data <<= 1;
}
//BODY
data <<= nbits;
for (int i = 0; i < nbits; i++) {
if (data & TOPBIT) {
mark(APPLE_ONE_MARK);
space(APPLE_ONE_SPACE);
}
else {
mark(APPLE_ONE_MARK);
space(APPLE_ZERO_SPACE);
}
data <<= 1;
}
//POST DATA
unsigned long post_data = 0x49;
post_data <<= 8;
for (int i = 0; i < 8; i++) {
if (post_data & TOPBIT) {
mark(APPLE_ONE_MARK);
space(APPLE_ONE_SPACE);
}
else {
mark(APPLE_ONE_MARK);
space(APPLE_ZERO_SPACE);
}
post_data <<= 1;
}
mark(APPLE_PTRAIL);
space(APPLE_GAP); //gap
}
void IRsendNEC::send(unsigned long data)
{
if (data==REPEAT) {
enableIROut(38);
mark (564* 16); space(564*4); mark(564);space(56*173);
}
else {
sendGeneric(data,32, 564*16, 564*8, 564, 564, 564*3, 564, 38, true);
}
};
void IRsend::sendRaw(unsigned int buf[], int len, int hz){
enableIROut(hz);
for (int i = 0; i < len; i++) {
if (i & 1) {
space(buf[i]);
}
else {
mark(buf[i]);
}
}
space(0); // Just to be sure
}
//+=============================================================================
void IRsend::sendRaw (unsigned int buf[], int len, int hz)
{
// Set IR carrier frequency
enableIROut(hz);
for (int i = 0; i < len; i++) {
if (i & 1) space(buf[i]) ;
else mark (buf[i]) ;
}
space(0); // Always end with the LED off
}
void IRsend::sendRaw(const uint16_t *buf, int len, int hz)
{
enableIROut(hz);
for (int i = 0; i < len; i++) {
if (i & 1) {
space(buf[i]);
}
else {
mark(buf[i]);
}
}
space(0); // Just to be sure
}
/*
* The remaining protocols require special treatment. They were in the original IRremote library.
*/
void IRsendRaw::send(unsigned int buf[], unsigned char len, unsigned char hz)
{
enableIROut(hz);
for (unsigned char i = 0; i < len; i++) {
if (i & 1) {
space(buf[i]);
}
else {
mark(buf[i]);
}
}
space(0); // Just to be sure
}
// Send a Pronto Code formatted message.
//
// Args:
// data: An array of uint16_t containing the pronto codes.
// len: Nr. of entries in the data[] array.
// repeat: Nr. of times to repeat the message.
//
// Status: ALPHA / Not tested in the real world.
//
// Note:
// Pronto codes are typically represented in hexadecimal.
// You will need to convert the code to an array of integers, and calculate
// it's length.
// e.g.
// A Sony 20 bit DVD remote command.
// "0000 0067 0000 0015 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018
// 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018
// 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018
// 0030 0018 0018 03f6"
//
// converts to:
//
// uint16_t prontoCode[46] = {
// 0x0000, 0x0067, 0x0000, 0x0015,
// 0x0060, 0x0018, 0x0018, 0x0018, 0x0030, 0x0018, 0x0030, 0x0018,
// 0x0030, 0x0018, 0x0018, 0x0018, 0x0030, 0x0018, 0x0018, 0x0018,
// 0x0018, 0x0018, 0x0030, 0x0018, 0x0018, 0x0018, 0x0030, 0x0018,
// 0x0030, 0x0018, 0x0030, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
// 0x0030, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0030, 0x0018,
// 0x0018, 0x03f6};
// // Send the Pronto(Sony) code. Repeat twice as Sony's require that.
// sendPronto(prontoCode, 46, SONY_MIN_REPEAT);
//
// Ref:
// http://www.etcwiki.org/wiki/Pronto_Infrared_Format
// http://www.remotecentral.com/features/irdisp2.htm
void IRsend::sendPronto(uint16_t data[], uint16_t len, uint16_t repeat) {
// Check we have enough data to work out what to send.
if (len < PRONTO_MIN_LENGTH) return;
// We only know how to deal with 'raw' pronto codes types. Reject all others.
if (data[PRONTO_TYPE_OFFSET] != 0) return;
// Pronto frequency is in Hz.
uint16_t hz = (uint16_t) (1000000U / (data[PRONTO_FREQ_OFFSET] *
PRONTO_FREQ_FACTOR));
enableIROut(hz);
// Grab the length of the two sequences.
uint16_t seq_1_len = data[PRONTO_SEQ_1_LEN_OFFSET] * 2;
uint16_t seq_2_len = data[PRONTO_SEQ_2_LEN_OFFSET] * 2;
// Calculate where each sequence starts in the buffer.
uint16_t seq_1_start = PRONTO_DATA_OFFSET;
uint16_t seq_2_start = PRONTO_DATA_OFFSET + seq_1_len;
uint32_t periodic_time = calcUSecPeriod(hz, false);
// Normal (1st sequence) case.
// Is there a first (normal) sequence to send?
if (seq_1_len > 0) {
// Check we have enough data to send the complete first sequence.
if (seq_1_len + seq_1_start > len) return;
// Send the contents of the 1st sequence.
for (uint16_t i = seq_1_start; i < seq_1_start + seq_1_len; i += 2) {
mark(data[i] * periodic_time);
space(data[i + 1] * periodic_time);
}
} else {
// There was no first sequence to send, it is implied that we have to send
// the 2nd/repeat sequence an additional time. i.e. At least once.
repeat++;
}
// Repeat (2nd sequence) case.
// Is there a second (repeat) sequence to be sent?
if (seq_2_len > 0) {
// Check we have enough data to send the complete second sequence.
if (seq_2_len + seq_2_start > len) return;
// Send the contents of the 2nd sequence.
for (uint16_t r = 0; r < repeat; r++)
for (uint16_t i = seq_2_start; i < seq_2_start + seq_2_len; i += 2) {
mark(data[i] * periodic_time);
space(data[i + 1] * periodic_time);
}
}
}
// Caller needs to take care of flipping the toggle bit
void IRsend::sendRCMM(unsigned long data, int nbits)
{
enableIROut(36);
data = data << (32 - nbits);
mark(RCMM_HDR_MARK);
space(RCMM_SPACE);
for (int i = 0; i < nbits; i += 2) {
mark(RCMM_MARK);
space(RCMM_SPACE+(data >> 30)*RCMM_INCREMENT);
data <<= 2;
}
mark(RCMM_MARK);
space(0);
}
////////////////////////
//IRsend::sendRaw
////////////////////////
void ICACHE_FLASH_ATTR sendRaw(unsigned int buf[], int len, int hz)
{
int i;
enableIROut(hz);
for (i = 0; i < len; i++) {
if (i & 1) {
space(buf[i]);
}
else {
mark(buf[i]);
}
}
space(1); // Just to be sure
}
void SLifiSender::send(unsigned long data, int nbits)
{
#if 0
enableIROut(38);
mark(SAMSUNG_HDR_MARK); // 5000microSec MARK
space(SAMSUNG_HDR_SPACE); // 5000microSec SPACE
for (int i = 0; i < nbits; i++) {
if (data & TOPBIT) { // 10000000000000000000000000000000 bit
mark(SAMSUNG_BIT_MARK); // 560microSec MARK
space(SAMSUNG_ONE_SPACE); // 1600microSec SPACE
}
else {
mark(SAMSUNG_BIT_MARK); // 560microSec MARK
space(SAMSUNG_ZERO_SPACE); // 560microSec SPACE
}
data <<= 1;
}
mark(SAMSUNG_BIT_MARK);
space(0);
#else
enableIROut(40);
mark(HEADER_MARK);
space(SONY_HDR_SPACE);
data = data << (32 - nbits);
for (int i = 0; i < nbits; i++) {
if (data & TOPBIT) {
mark(SONY_ONE_MARK);
space(SONY_HDR_SPACE);
}
else {
mark(SONY_ZERO_MARK);
space(SONY_HDR_SPACE);
}
data <<= 1;
}
#endif
}
void IRsend::sendDISH(unsigned long data, int nbits) {
enableIROut(56);
mark(DISH_HDR_MARK);
space(DISH_HDR_SPACE);
for (int i = 0; i < nbits; i++) {
if (data & DISH_TOP_BIT) {
mark(DISH_BIT_MARK);
space(DISH_ONE_SPACE);
}
else {
mark(DISH_BIT_MARK);
space(DISH_ZERO_SPACE);
}
data <<= 1;
}
}
// Send a Whynter message.
//
// Args:
// data: message to be sent.
// nbits: Nr. of bits of the message to be sent.
// repeat: Nr. of additional times the message is to be sent.
//
// Status: STABLE
//
// Ref:
// https://github.com/z3t0/Arduino-IRremote/blob/master/ir_Whynter.cpp
void IRsend::sendWhynter(uint64_t data, uint16_t nbits, uint16_t repeat) {
// Set IR carrier frequency
enableIROut(38);
for (uint16_t i = 0; i <= repeat; i++) {
// (Pre-)Header
mark(kWhynterBitMark);
space(kWhynterZeroSpace);
sendGeneric(
kWhynterHdrMark, kWhynterHdrSpace, kWhynterBitMark, kWhynterOneSpace,
kWhynterBitMark, kWhynterZeroSpace, kWhynterBitMark, kWhynterMinGap,
kWhynterMinCommandLength - (kWhynterBitMark + kWhynterZeroSpace), data,
nbits, 38, true, 0, // Repeats are already handled.
50);
}
}
void IRsend::sendMedia(unsigned char *data, int length)
{
enableIROut(38);
mark(4400);
space(4400);
for(int i = 0; i < length; i++){
for(int j = 0; j < 8; j++){
if((*(data+i))&(0x80>>j)){
mark(540);
space(1620);
}
else{
mark(540);
space(540);
}
}
}
void IRsend::sendSony(unsigned long data, int nbits) {
enableIROut(40);
mark(SONY_HDR_MARK);
space(SONY_HDR_SPACE);
data = data << (32 - nbits);
for (int i = 0; i < nbits; i++) {
if (data & TOPBIT) {
mark(SONY_ONE_MARK);
space(SONY_HDR_SPACE);
}
else {
mark(SONY_ZERO_MARK);
space(SONY_HDR_SPACE);
}
data <<= 1;
}
}
void IRsendBase::sendGeneric(unsigned long data, int Num_Bits, int Head_Mark, int Head_Space, int Mark_One, int Mark_Zero, int Space_One, int Space_Zero, int mHz, bool Use_Stop) {
data = data << (32 - Num_Bits);
enableIROut(mHz);
//Some protocols do not send a header when sending repeat codes. So we pass a zero value to indicate skipping this.
if(Head_Mark) mark(Head_Mark);
if(Head_Space) space(Head_Space);
for (int i = 0; i <Num_Bits; i++) {
if (data & TOPBIT) {
mark(Mark_One); space(Space_One);
}
else {
mark(Mark_Zero); space(Space_Zero);
}
data <<= 1;
}
if (Use_Stop) mark(Mark_One); space(0) ; //stop bit of "1"
};
//Used to reduce read time by using 50us ticks so we can use bytes instead of int.
//The calculations are done as we read the ticks array.
void IRsend::sendRawCompact(uint8_t *buf, int len, int hz)
{
unsigned int compCalc;
enableIROut(hz);
for (int i = 0; i < len; i++) {
compCalc = (unsigned int)buf[i] * USECPERTICK;
if (i & 1) {
space(compCalc);
//space(buf[i]);
}
else {
mark(compCalc);
//mark(buf[i]);
}
}
space(0); // Just to be sure
}
