/**
 * int main()
 * 
 * Descricao:
 * 	Funcao principal do programa que contem um loop (do-while) contendo a chamada
 * 	das funcoes que calculam as variaveis utilizadas pelo algoritmo Gauss-Legendre
 * 	a cada iteracao. 
 * 
 * Parametros de entrada:
 * 	-
 * 
 * Parametros de retorno:
 *	-
 *	
 */
int main(){
  
  /* Variaveis utilizadas para calcular o tempo de execucao do programa */
  time_t begin, end;
  double time_spent;
  time(&begin);

  /* Inicialicazao das variaveis globais utilizadas no algoritmo */
  initAttributes();  
  
  /* Loop principal que calcula o valor do "pi" */
  do{    
    //printf("Iteracao: %ld\n", n_count);    
    
    calculate_a();
    calculate_b();
    calculate_t();
    calculate_p();
    calculate_pi();    
    filePrint();
    
    n_count++;  
  } while(mpf_cmp(pi[n_count-2], pi[n_count-1])!=0); /* Condicao de parada: o "pi" recem calculado deve 
							 ser igual ao seu antecessor, garantindo assim a sua 
							 convergencia com 10 milhoes de casas decimais */

  
  time(&end);
  time_spent = difftime(end, begin);	

  printf("Tempo de execucao: %lf segundos\nIteracoes: %ld\n", time_spent, n_count);
  
  return 0;
}
void TextEdit::setupFileActions()
{
    QToolBar *tb = new QToolBar( this );
    QPopupMenu *menu = new QPopupMenu( this );
    menuBar()->insertItem( tr( "&File" ), menu );

    QAction *a;
    a = new QAction( tr( "New" ), QPixmap( "textdrawing/filenew.png" ), tr( "&New..." ), CTRL + Key_N, this, "fileNew" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileNew() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( tr( "Open" ), QPixmap( "textdrawing/fileopen.png" ), tr( "&Open..." ), CTRL + Key_O, this, "fileOpen" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileOpen() ) );
    a->addTo( tb );
    a->addTo( menu );
    menu->insertSeparator();
    a = new QAction( tr( "Save" ), QPixmap( "textdrawing/filesave.png" ), tr( "&Save..." ), CTRL + Key_S, this, "fileSave" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileSave() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( tr( "Save As" ), QPixmap(), tr( "Save &As..." ), 0, this, "fileSaveAs" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileSaveAs() ) );
    a->addTo( menu );
    menu->insertSeparator();
    a = new QAction( tr( "Print" ), QPixmap( "textdrawing/print.png" ), tr( "&Print..." ), CTRL + Key_P, this, "filePrint" );
    connect( a, SIGNAL( activated() ), this, SLOT( filePrint() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( tr( "Close" ), QPixmap(), tr( "&Close" ), 0, this, "fileClose" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileClose() ) );
    a->addTo( menu );
}
Example #3
0
bool TextEdit::qt_invoke( int _id, QUObject* _o )
{
    switch ( _id - staticMetaObject()->slotOffset() ) {
    case 0: fileNew(); break;
    case 1: fileOpen(); break;
    case 2: fileSave(); break;
    case 3: fileSaveAs(); break;
    case 4: filePrint(); break;
    case 5: fileClose(); break;
    case 6: fileExit(); break;
    case 7: editUndo(); break;
    case 8: editRedo(); break;
    case 9: editCut(); break;
    case 10: editCopy(); break;
    case 11: editPaste(); break;
    case 12: textBold(); break;
    case 13: textUnderline(); break;
    case 14: textItalic(); break;
    case 15: textFamily((const QString&)static_QUType_QString.get(_o+1)); break;
    case 16: textSize((const QString&)static_QUType_QString.get(_o+1)); break;
    case 17: textColor(); break;
    case 18: textAlign((QAction*)static_QUType_ptr.get(_o+1)); break;
    case 19: fontChanged((const QFont&)*((const QFont*)static_QUType_ptr.get(_o+1))); break;
    case 20: colorChanged((const QColor&)*((const QColor*)static_QUType_ptr.get(_o+1))); break;
    case 21: alignmentChanged((int)static_QUType_int.get(_o+1)); break;
    case 22: editorChanged((QWidget*)static_QUType_ptr.get(_o+1)); break;
    default:
	return QMainWindow::qt_invoke( _id, _o );
    }
    return TRUE;
}
Example #4
0
void kerp::setupActions()
{
    KStdAction::openNew(this, SLOT(fileNew()), actionCollection());
    KStdAction::open(this, SLOT(fileOpen()), actionCollection());
    KStdAction::save(this, SLOT(fileSave()), actionCollection());
    KStdAction::saveAs(this, SLOT(fileSaveAs()), actionCollection());
    KStdAction::print(this, SLOT(filePrint()), actionCollection());
    KStdAction::quit(kapp, SLOT(quit()), actionCollection());

    m_toolbarAction = KStdAction::showToolbar(this, SLOT(optionsShowToolbar()), actionCollection());
    m_statusbarAction = KStdAction::showStatusbar(this, SLOT(optionsShowStatusbar()), actionCollection());

    KStdAction::keyBindings(this, SLOT(optionsConfigureKeys()), actionCollection());
    KStdAction::configureToolbars(this, SLOT(optionsConfigureToolbars()), actionCollection());
    KStdAction::preferences(this, SLOT(optionsPreferences()), actionCollection());

    // this doesn't do anything useful.  it's just here to illustrate
    // how to insert a custom menu and menu item
    KAction *city_action = new KAction(i18n("&City/province"), 0,
                                  this, SLOT(city_action()),
                                  actionCollection(), "city_action");
    KAction *invoice_action=new KAction(i18n("&Invoice"),0,
    					this,SLOT(invoice_action()),
					actionCollection(),"invoice_action");

    KAction * partner_action = new KAction(i18n("&Partner"),0,
    									this,SLOT( partner_action()),
    									actionCollection(),"partner_action");

    createGUI();
}
int main( )
{
	char answer;
	char result;

	Menu( );

	// ***********Answer to playing*************
	while( answer = playAgain( ) )
	{
		switch( answer ) // The user decides to play the game
		{
			case 'y':
					printf( "Alright! Lets Play!\n\n" );

					Instructions( ); // Will jump to the Instuctions Function
					result = playGame( ); // Will jump to rhe playGame Function

				// ****************RESULT OF GAME*************************


					if( result == 'w' ) // After the function playGame returns 'w', the user then won the game.
					{
						printf( "\n\nHurray! You Win!\n\n\n" );	
					}

					if( result == 'l' ) // Vise versa with the function playGame if it returns 'l'.
					{
						printf( "Awwww. I'm sorry but you Lose!\n\n\n" );
					}

					break;
			case 'n':
					printf( "Too Bad! Maybe next time!\n" ); //The user decides to not play the game thus the program terminates
					
					return 0;

			case 'v':
					filePrint( );
				
					break;

			default:
					printf( "That was not one of the choices. Please try again.\n\n" );

					break;
				
		}

		Menu( );
	}
}
void CreateBlogMsg::setupFileActions()
{
    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    a = new QAction(QIcon(":/images/textedit/filenew.png"), tr("&New"), this);
    a->setShortcut(QKeySequence::New);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    menu->addAction(a);

    a = new QAction(QIcon(":/images/textedit/fileopen.png"), tr("&Open..."), this);
    a->setShortcut(QKeySequence::Open);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon(":/images/textedit/filesave.png"), tr("&Save"), this);
    a->setShortcut(QKeySequence::Save);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    menu->addAction(a);

    a = new QAction(tr("Save &As..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    menu->addAction(a);
    menu->addSeparator();

    a = new QAction(QIcon(":/images/textedit/fileprint.png"), tr("&Print..."), this);
    a->setShortcut(QKeySequence::Print);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    menu->addAction(a);

    a = new QAction(QIcon(":/images/textedit/fileprint.png"), tr("Print Preview..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPreview()));
    menu->addAction(a);

    a = new QAction(QIcon(":/images/textedit/exportpdf.png"), tr("&Export PDF..."), this);
    a->setShortcut(Qt::CTRL + Qt::Key_D);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPdf()));
    menu->addAction(a);

    menu->addSeparator();

    a = new QAction(tr("&Quit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    connect(a, SIGNAL(triggered()), this, SLOT(cancelMsg()));
    menu->addAction(a);
}
Example #7
0
void Help::setupFileActions()
{
    QPopupMenu* menu = new QPopupMenu( this );
    menuBar()->insertItem( tr( "&File" ), menu );
    QAction *a;

    a = new QAction( tr( "Print" ), createIconSet( "print.xpm" ), tr( "&Print" ), CTRL + Key_P, this );
    a->addTo( menu );
    a->addTo( toolbar );
    connect( a, SIGNAL( activated() ), this, SLOT( filePrint() ) );

    a = new QAction( tr( "Close" ), tr( "&Close" ), 0, this );
    a->addTo( menu );
    connect( a, SIGNAL( activated() ), this, SLOT( close() ) );
}
Example #8
0
void MainWindow::createConnections()
{
    connect(fileNewAction, SIGNAL(triggered()),
            this, SLOT(fileNew()));
    connect(fileOpenAction, SIGNAL(triggered()),
            this, SLOT(fileOpen()));
    connect(fileSaveAction, SIGNAL(triggered()),
            this, SLOT(fileSave()));
    connect(fileSaveAsAction, SIGNAL(triggered()),
            this, SLOT(fileSaveAs()));
    connect(fileExportAction, SIGNAL(triggered()),
            this, SLOT(fileExport()));
    connect(filePrintAction, SIGNAL(triggered()),
            this, SLOT(filePrint()));
    connect(fileQuitAction, SIGNAL(triggered()),
            this, SLOT(close()));
    connect(editSelectedItemAction, SIGNAL(triggered()),
            this, SLOT(editSelectedItem()));
    connect(editAddTextAction, SIGNAL(triggered()),
            this, SLOT(editAddItem()));
    connect(editAddBoxAction, SIGNAL(triggered()),
            this, SLOT(editAddItem()));
    connect(editAddSmileyAction, SIGNAL(triggered()),
            this, SLOT(editAddItem()));
    connect(editCopyAction, SIGNAL(triggered()),
            this, SLOT(editCopy()));
    connect(editCutAction, SIGNAL(triggered()),
            this, SLOT(editCut()));
    connect(editPasteAction, SIGNAL(triggered()),
            this, SLOT(editPaste()));
    connect(QApplication::clipboard(), SIGNAL(dataChanged()),
            this, SLOT(updateUi()));
    foreach (QAction *action, QList<QAction*>()
             << editAlignmentAction << editAlignLeftAction
             << editAlignRightAction << editAlignTopAction
             << editAlignBottomAction)
        connect(action, SIGNAL(triggered()), this, SLOT(editAlign()));
    connect(editClearTransformsAction, SIGNAL(triggered()),
            this, SLOT(editClearTransforms()));
    connect(scene, SIGNAL(selectionChanged()),
            this, SLOT(selectionChanged()));
    connect(viewShowGridAction, SIGNAL(toggled(bool)),
            this, SLOT(viewShowGrid(bool)));
    connect(viewZoomInAction, SIGNAL(triggered()),
            view, SLOT(zoomIn()));
    connect(viewZoomOutAction, SIGNAL(triggered()),
            view, SLOT(zoomOut()));
}
Example #9
0
void ABMainWindow::setupMenuBar()
{
    QPopupMenu *file = new QPopupMenu( this );
    menuBar()->insertItem( "&File", file );

    file->insertItem( "New", this, SLOT( fileNew() ), CTRL + Key_N );
    file->insertItem( QPixmap( "fileopen.xpm" ), "Open", this, SLOT( fileOpen() ), CTRL + Key_O );
    file->insertSeparator();
    file->insertItem( QPixmap( "filesave.xpm" ), "Save", this, SLOT( fileSave() ), CTRL + Key_S );
    file->insertItem( "Save As...", this, SLOT( fileSaveAs() ) );
    file->insertSeparator();
    file->insertItem( QPixmap( "fileprint.xpm" ), "Print...", this, SLOT( filePrint() ), CTRL + Key_P );
    file->insertSeparator();
    file->insertItem( "Close", this, SLOT( closeWindow() ), CTRL + Key_W );
    file->insertItem( "Quit", qApp, SLOT( quit() ), CTRL + Key_Q );
}
Example #10
0
void Korrent::setupActions()
{
    KStdAction::openNew(this, SLOT(fileNew()), actionCollection());
    KStdAction::open(this, SLOT(fileOpen()), actionCollection());
    KStdAction::save(this, SLOT(fileSave()), actionCollection());
    KStdAction::saveAs(this, SLOT(fileSaveAs()), actionCollection());
    KStdAction::print(this, SLOT(filePrint()), actionCollection());
    KStdAction::quit(kapp, SLOT(quit()), actionCollection());

    KStdAction::preferences(this, SLOT(optionsPreferences()), actionCollection());

    // this doesn't do anything useful.  it's just here to illustrate
    // how to insert a custom menu and menu item
    KAction *custom = new KAction(i18n("Cus&tom Menuitem"), 0,
                                  this, SLOT(optionsPreferences()),
                                  actionCollection(), "custom_action");
}
Example #11
0
MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent)
{
    setupUi(this);
    setWindowTitle(tr("GD CAD"));
    newFile();

    qApp->installEventFilter(this);
//    scene =  new QGraphicsScene;

    /*or(int x = 0; x <= ui->graphicsView->width(); x += 10){
        scene->addLine(x,0,x,ui->graphicsView->height(),QPen(Qt::green));
    }
    for(int y = 0; y <= ui->graphicsView->height(); y += 10){
        scene->addLine(0,y,ui->graphicsView->width(),y,QPen(Qt::green));
    }

    for(int x = 10; x <= ui->graphicsView->width(); x += 100){
        scene->addLine(x,0,x,ui->graphicsView->height(),QPen(Qt::darkGreen));
    }

    for(int y = 10; y <= ui->graphicsView->height(); y += 100){
        scene->addLine(0,y,ui->graphicsView->width(),y,QPen(Qt::darkGreen));
    }

    ui->graphicsView->setScene(scene);*/

    connect(ui->pointButton, SIGNAL(clicked()), this, SLOT(drawPoint()));
    connect(ui->lineButton, SIGNAL(clicked()), this, SLOT(drawLine()));
    connect(ui->circleButton, SIGNAL(clicked()), this, SLOT(drawCircle()));
    connect(ui->ellipseButton, SIGNAL(clicked()), this, SLOT(drawEllipse()));

    connect(ui->actionPoints, SIGNAL(triggered()), this, SLOT(drawPoint()));
    connect(ui->actionLine, SIGNAL(triggered()), this, SLOT(drawLine()));
    connect(ui->actionCircle, SIGNAL(triggered()), this, SLOT(drawCircle()));
    connect(ui->actionEllipse, SIGNAL(triggered()), this, SLOT(drawEllipse()));

    connect(actionNew, SIGNAL(triggered()), this, SLOT(newFile()));
    connect(actionQuit, SIGNAL(triggered()), this, SLOT(close()));
    connect(actionNew, SIGNAL(triggered()), this, SLOT(newFile()));
    connect(actionQuit, SIGNAL(triggered()), this, SLOT(close()));
    connect(actionPrint, SIGNAL(triggered()), this, SLOT(filePrint()));
    connect(actionPrintPreview, SIGNAL(triggered()), this, SLOT(filePrintPreview()));

}
void Krecipes::setupActions()
{

    printAction =  KStandardAction::print( this, SLOT( filePrint() ), actionCollection() );

    reloadAction = new KAction( this );
    reloadAction->setText( i18nc("@action:inmenu Reload Recipe", "Reloa&d" ) );
    reloadAction->setIcon( KIcon( "view-refresh" ) );
    reloadAction->setShortcut( Qt::Key_F5 );
    actionCollection()->addAction( "reload_action" , reloadAction );
    connect( reloadAction, SIGNAL(triggered(bool)), m_view, SLOT( reloadDisplay() ) );

    editAction = new KAction( this );
    editAction->setText( i18n( "&Edit Recipe" ) );
    editAction->setIcon( KIcon( "document-edit" ) );
    editAction->setShortcut( Qt::CTRL + Qt::Key_E );
    actionCollection()->addAction( "edit_action" , editAction );
    connect( editAction, SIGNAL(triggered(bool)), m_view, SLOT( editRecipe() ) );

    converterAction = new KAction( this );
    converterAction->setText( i18n( "&Measurement Converter" ) );
    converterAction->setShortcut( Qt::CTRL + Qt::Key_M );
    actionCollection()->addAction( "converter_action" , converterAction );
    connect( converterAction, SIGNAL(triggered(bool)), this , SLOT( conversionToolSlot() ) );

    KConfigGroup grp(KGlobal::config(),"Advanced");

    if ( grp.readEntry("UnhideMergeTools",false) ) { //FIXME: Please review it, not used yet

        mergeCategoriesAction = new KAction( this );
        mergeCategoriesAction->setIcon( KIcon( "folder-yellow" ) );
        mergeCategoriesAction->setText( i18n( "&Merge Similar Categories..." ) );
        //mergeCategoriesAction->setShortcut( Qt::CTRL + Qt::Key_M );
        actionCollection()->addAction( "merge_categories_action", mergeCategoriesAction );
        connect( mergeCategoriesAction, SIGNAL(triggered(bool)), this, SLOT( mergeSimilarCategories() ) );

        mergeIngredientsAction = new KAction( this );
        mergeIngredientsAction->setIcon( KIcon( "ingredients" ) );
        mergeIngredientsAction->setText( i18n( "&Merge Similar Ingredients..." ) );
        //┬║mergeIngredientsAction->setShortcut( Qt::CTRL + Qt::Key_M );
        actionCollection()->addAction( "merge_ingredients_action", mergeIngredientsAction );
        connect( mergeIngredientsAction, SIGNAL(triggered(bool)), this, SLOT( mergeSimilarIngredients() ) );

    }
Example #13
0
/*
 *  Constructs a RenderWindow as a child of 'parent', with the
 *  name 'name' and widget flags set to 'f'.
 *
 */
RenderWindow::RenderWindow(QWidget* parent, const char* name, Qt::WFlags fl)
    : QMainWindow(parent, name, fl)
{
    setupUi(this);

    (void)statusBar();

    // signals and slots connections
    connect(fileOpenAction, SIGNAL(activated()), this, SLOT(fileOpen()));
    connect(filePrintAction, SIGNAL(activated()), this, SLOT(filePrint()));
    connect(filePrintToPDFAction, SIGNAL(activated()), this, SLOT(filePrintToPDF()));
    connect(fileExitAction, SIGNAL(activated()), this, SLOT(fileExit()));
    connect(helpAboutAction, SIGNAL(activated()), this, SLOT(helpAbout()));
    connect(_delete, SIGNAL(clicked()), this, SLOT(sDelete()));
    connect(_edit, SIGNAL(clicked()), this, SLOT(sEdit()));
    connect(_add, SIGNAL(clicked()), this, SLOT(sAdd()));
    connect(_table, SIGNAL(selectionChanged()), this, SLOT(sSelectionChanged()));
    connect(_list, SIGNAL(clicked()), this, SLOT(sList()));
}
Example #14
0
MQLEdit::MQLEdit(QWidget* parent, Qt::WindowFlags fl)
    : QMainWindow(parent, fl)
{
    setupUi(this);

    (void)statusBar();

    // signals and slots connections
    connect(fileNewAction, SIGNAL(activated()), this, SLOT(fileNew()));
    connect(fileOpenAction, SIGNAL(activated()), this, SLOT(fileOpen()));
    connect(fileSaveAction, SIGNAL(activated()), this, SLOT(fileSave()));
    connect(fileSaveAsAction, SIGNAL(activated()), this, SLOT(fileSaveAs()));
    connect(filePrintAction, SIGNAL(activated()), this, SLOT(filePrint()));
    connect(fileExitAction, SIGNAL(activated()), this, SLOT(fileExit()));
    connect(editFindAction, SIGNAL(activated()), this, SLOT(editFind()));
    connect(helpIndexAction, SIGNAL(activated()), this, SLOT(helpIndex()));
    connect(helpContentsAction, SIGNAL(activated()), this, SLOT(helpContents()));
    connect(helpAboutAction, SIGNAL(activated()), this, SLOT(helpAbout()));
    connect(fileDatabaseConnectAction, SIGNAL(activated()), this, SLOT(fileDatabaseConnect()));
    connect(fileDatabaseDisconnectAction, SIGNAL(activated()), this, SLOT(fileDatabaseDisconnect()));
    connect(viewParameter_ListAction, SIGNAL(activated()), this, SLOT(showParamList()));
    connect(toolsParse_QueryAction, SIGNAL(activated()), this, SLOT(parseQuery()));
    connect(toolsExecute_QueryAction, SIGNAL(activated()), this, SLOT(execQuery()));
    connect(viewLog_OutputAction, SIGNAL(activated()), this, SLOT(showLog()));
    connect(viewResultsAction, SIGNAL(activated()), this, SLOT(showResults()));
    connect(viewExecuted_SQLAction, SIGNAL(activated()), this, SLOT(showExecutedSQL()));

    QSqlDatabase db = QSqlDatabase();
    if(_loggedIn && db.isValid() && db.isOpen()) {
	_loggedIn = true;
    } else {
	_loggedIn = false;
    }
    
    fileDatabaseConnectAction->setEnabled(!_loggedIn);
    fileDatabaseDisconnectAction->setEnabled(_loggedIn);
    
    _pEdit = new ParameterEdit(this);
    _log = new LogOutput(this);
    _sql = new LogOutput(this);
    _results = new ResultsOutput(this);
}
Example #15
0
void TextEdit::setupFileActions()
{
    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    a = new QAction(QIcon(rsrcPath + "/filenew.png"), tr("&New"), this);
    a->setShortcut(QKeySequence::New);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    menu->addAction(a);

    a = new QAction(QIcon(rsrcPath + "/fileopen.png"), tr("&Open..."), this);
    a->setShortcut(QKeySequence::Open);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon(rsrcPath + "/filesave.png"), tr("&Save"), this);
    a->setShortcut(QKeySequence::Save);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    menu->addAction(a);

    a = new QAction(tr("Save &As..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    menu->addAction(a);
    menu->addSeparator();

    a = new QAction(QIcon(rsrcPath + "/fileprint.png"), tr("&Print..."), this);
    a->setShortcut(QKeySequence::Print);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    menu->addAction(a);

    menu->addSeparator();

    a = new QAction(tr("&Quit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    connect(a, SIGNAL(triggered()), this, SLOT(close()));
    menu->addAction(a);
}
Example #16
0
void k2send::setupActions()
{



    KAction *action;
    KShortcut cut;
    setXMLFile( "k2sendui.rc" );
    KStdAction::openNew(this, SLOT(fileNew()), actionCollection(),"file_new");

    KStdAction::open(this, SLOT(fileOpen()), actionCollection(),"file_open");

    action = new KAction(i18n("Import Playlist"), cut, this, SLOT(importPlaylist()), actionCollection(), "file_import");

    KStdAction::print(this, SLOT(filePrint()), actionCollection(),"file_print");
    KStdAction::quit(kapp, SLOT(quit()), actionCollection(),"file_quit");

    m_toolbarAction = KStdAction::showToolbar(this, SLOT(optionsShowToolbar()), actionCollection());
    m_statusbarAction = KStdAction::showStatusbar(this, SLOT(optionsShowStatusbar()), actionCollection());

    KStdAction::keyBindings(this, SLOT(optionsConfigureKeys()), actionCollection());
    KStdAction::configureToolbars(this, SLOT(optionsConfigureToolbars()), actionCollection());
    KStdAction::preferences(this, SLOT(optionsPreferences()), actionCollection(),"preferences");

    action = new KAction(i18n("Remove"), "editdelete", cut, m_view, SLOT(slotRemoveBranch()), actionCollection(), "file_remove");

    action = new KAction(i18n("Play"), "player_play", cut, m_view, SLOT(slotPlay()), actionCollection(), "player_play");
    action = new KAction(i18n("Stop"), "player_stop", cut,m_view, SLOT(slotStop()), actionCollection(), "player_stop");
    action = new KAction(i18n("Next"), "player_fwd", cut,m_view, SLOT(slotSkip()), actionCollection(), "player_next");
    action = new KAction(i18n("Loudness"), 0, cut,m_view, SLOT(slotLoudness()), actionCollection(), "player_loudness");

    action = new KAction(i18n("Clear"), "reload", cut,m_view, SLOT(slotPlaylistClear()), actionCollection(), "playlist_clear");

    action = new KAction(i18n("Play"), "player_play", cut,m_view, SLOT(slotConsolePlay()), actionCollection(), "console_play");
    action = new KAction(i18n("Stop"), "player_stop", cut,m_view, SLOT(slotConsoleStop()), actionCollection(), "console_stop");
    action = new KAction(i18n("Clear"), "reload", cut,m_view, SLOT(slotConsoleClear()), actionCollection(), "console_clear");
    createGUI();



}
Example #17
0
RenderWindow::RenderWindow(QWidget* parent, Qt::WindowFlags fl)
    : QMainWindow(parent, fl)
{
  setupUi(this);

  (void)statusBar();

  // signals and slots connections
  connect(fileOpenAction, SIGNAL(activated()), this, SLOT(fileOpen()));
  connect(fileLoadFromDB, SIGNAL(activated()), this, SLOT(fileLoad()));
  connect(filePrintPreviewAction, SIGNAL(activated()), this, SLOT(filePreview()));
  connect(filePrintAction, SIGNAL(activated()), this, SLOT(filePrint()));
  connect(filePrintToPDFAction, SIGNAL(activated()), this, SLOT(filePrintToPDF()));
  connect(fileExitAction, SIGNAL(activated()), this, SLOT(fileExit()));
  connect(helpAboutAction, SIGNAL(activated()), this, SLOT(helpAbout()));
  connect(_delete, SIGNAL(clicked()), this, SLOT(sDelete()));
  connect(_edit, SIGNAL(clicked()), this, SLOT(sEdit()));
  connect(_add, SIGNAL(clicked()), this, SLOT(sAdd()));
  connect(_table, SIGNAL(itemSelectionChanged()), this, SLOT(sSelectionChanged()));
  connect(_list, SIGNAL(clicked()), this, SLOT(sList()));
  _autoPrint = false;                    //AUTOPRINT
}
Example #18
0
void TextEdit::setupFileActions()
{
    QToolBar *tb = new QToolBar( this );
    tb->setLabel( "File Actions" );
    QPopupMenu *menu = new QPopupMenu( this );
    menuBar()->insertItem( tr( "&File" ), menu );

    QAction *a;
    a = new QAction( QPixmap::fromMimeSource( "filenew.xpm" ), tr( "&New..." ), CTRL + Key_N, this, "fileNew" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileNew() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( QPixmap::fromMimeSource( "fileopen.xpm" ), tr( "&Open..." ), CTRL + Key_O, this, "fileOpen" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileOpen() ) );
    a->addTo( tb );
    a->addTo( menu );
    menu->insertSeparator();
    a = new QAction( QPixmap::fromMimeSource( "filesave.xpm" ), tr( "&Save..." ), CTRL + Key_S, this, "fileSave" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileSave() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( tr( "Save &As..." ), 0, this, "fileSaveAs" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileSaveAs() ) );
    a->addTo( menu );
    menu->insertSeparator();
    a = new QAction( QPixmap::fromMimeSource( "fileprint.xpm" ), tr( "&Print..." ), CTRL + Key_P, this, "filePrint" );
    connect( a, SIGNAL( activated() ), this, SLOT( filePrint() ) );
    a->addTo( tb );
    a->addTo( menu );
    a = new QAction( tr( "&Close" ), 0, this, "fileClose" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileClose() ) );
    a->addTo( menu );
    a = new QAction( tr( "E&xit" ), 0, this, "fileExit" );
    connect( a, SIGNAL( activated() ), this, SLOT( fileExit() ) );
    a->addTo( menu );
}
Example #19
0
void Kooka::setupActions()
{

    KStdAction::print(this, SLOT(filePrint()), actionCollection());
    KStdAction::quit(this , SLOT(close()), actionCollection());

    KStdAction::keyBindings(guiFactory(), SLOT(configureShortcuts()), 
actionCollection());
    KStdAction::configureToolbars(this, SLOT(optionsConfigureToolbars()),
				  actionCollection());
    KStdAction::preferences(this, SLOT(optionsPreferences()), actionCollection());

    m_view->createDockMenu(actionCollection(), this, "settings_show_docks" );

    /* Image Viewer action Toolbar - OCR, Scaling etc. */
    (void) new KAction(i18n("&OCR Image..."), "ocr", CTRL+Key_O,
		       m_view, SLOT(doOCR()),
		       actionCollection(), "ocrImage" );

    (void) new KAction(i18n("O&CR on Selection..."), "ocr-select", CTRL+Key_C,
		       m_view, SLOT(doOCRonSelection()),
		       actionCollection(), "ocrImageSelect" );

    KAction *act;
    act =  new KAction(i18n("Scale to W&idth"), "scaletowidth", CTRL+Key_I,
		       m_view, SLOT( slIVScaleToWidth()),
		       actionCollection(), "scaleToWidth" );
    m_view->connectViewerAction( act );

    act = new KAction(i18n("Scale to &Height"), "scaletoheight", CTRL+Key_H,
		       m_view, SLOT( slIVScaleToHeight()),
		       actionCollection(), "scaleToHeight" );
    m_view->connectViewerAction( act );

    act = new KAction(i18n("Original &Size"), "scaleorig", CTRL+Key_S,
                      m_view, SLOT( slIVScaleOriginal()),
                      actionCollection(), "scaleOriginal" );
    m_view->connectViewerAction( act );

#ifdef QICONSET_HONOUR_ON_OFF
    /* The Toggleaction does not seem to handle the on/off icon from QIconSet */
    QIconSet lockSet;
    lockSet.setPixmap(BarIcon("lock")  , QIconSet::Automatic, QIconSet::Normal, QIconSet::On );
    lockSet.setPixmap(BarIcon("unlock"), QIconSet::Automatic, QIconSet::Normal, QIconSet::Off);
    act = new KToggleAction ( i18n("Keep &Zoom Setting"), lockSet, CTRL+Key_Z,
                              actionCollection(), "keepZoom" );
#else
    act = new KToggleAction( i18n("Keep &Zoom Setting"), BarIcon("lockzoom"), CTRL+Key_Z,
                             actionCollection(), "keepZoom" );
#endif

    connect( act, SIGNAL( toggled( bool ) ), m_view->getImageViewer(),
             SLOT(setKeepZoom(bool)));

    m_view->connectViewerAction( act );

    /* thumbview and gallery actions */
    act = new KAction(i18n("Set Zoom..."), "viewmag", 0,
		       m_view, SLOT( slIVShowZoomDialog()),
		       actionCollection(), "showZoomDialog" );
    m_view->connectViewerAction( act );

    (void) new KAction(i18n("Create From Selectio&n"), "crop", CTRL+Key_N,
		       m_view, SLOT( slCreateNewImgFromSelection() ),
		       actionCollection(), "createFromSelection" );

    (void) new KAction(i18n("Mirror Image &Vertically"), "mirror-vert", CTRL+Key_V,
		       this, SLOT( slMirrorVertical() ),
		       actionCollection(), "mirrorVertical" );

    (void) new KAction(i18n("&Mirror Image Horizontally"), "mirror-horiz", CTRL+Key_M,
		       this, SLOT( slMirrorHorizontal() ),
		       actionCollection(), "mirrorHorizontal" );

    (void) new KAction(i18n("Mirror Image &Both Directions"), "mirror-both", CTRL+Key_B,
		       this, SLOT( slMirrorBoth() ),
		       actionCollection(), "mirrorBoth" );

    (void) new KAction(i18n("Open Image in &Graphic Application..."), "fileopen", CTRL+Key_G,
		       m_view, SLOT( slOpenCurrInGraphApp() ),
		       actionCollection(), "openInGraphApp" );

    act = new KAction(i18n("&Rotate Image Clockwise"), "rotate_cw", CTRL+Key_R,
		      this, SLOT( slRotateClockWise() ),
		       actionCollection(), "rotateClockwise" );
    m_view->connectViewerAction( act );

    act = new KAction(i18n("Rotate Image Counter-Clock&wise"), "rotate_ccw", CTRL+Key_W,
		       this, SLOT( slRotateCounterClockWise() ),
		       actionCollection(), "rotateCounterClockwise" );
    m_view->connectViewerAction( act );

    act = new KAction(i18n("Rotate Image 180 &Degrees"), "rotate", CTRL+Key_D,
		       this, SLOT( slRotate180() ),
		       actionCollection(), "upsitedown" );
    m_view->connectViewerAction( act );

    /* Gallery actions */
    act = new KAction(i18n("&Create Folder..."), "folder_new", 0,
		      m_view->gallery(), SLOT( slotCreateFolder() ),
		       actionCollection(), "foldernew" );
    m_view->connectGalleryAction( act );

    act = new KAction(i18n("&Save Image..."), "filesave", 0,
		      m_view->gallery(), SLOT( slotExportFile() ),
		       actionCollection(), "saveImage" );
    m_view->connectGalleryAction( act );

    act = new KAction(i18n("&Import Image..."), "inline_image", 0,
		      m_view->gallery(), SLOT( slotImportFile() ),
		       actionCollection(), "importImage" );
    m_view->connectGalleryAction( act );

    act = new KAction(i18n("&Delete Image"), "edittrash", 0,
		      m_view->gallery(), SLOT( slotDeleteItems() ),
		       actionCollection(), "deleteImage" );
    m_view->connectGalleryAction( act );

    act = new KAction(i18n("&Unload Image"), "fileclose", 0,
		      m_view->gallery(), SLOT( slotUnloadItems() ),
		       actionCollection(), "unloadImage" );
    m_view->connectGalleryAction( act );

#if 0
    /* not yet supported actions - coming post 3.1 */
    (void) new KAction(i18n("&Load Scan Parameters"), "bookmark_add", CTRL+Key_L,
                       m_view, SLOT(slLoadScanParams()),
                       actionCollection(), "loadscanparam" );

    (void) new KAction(i18n("Save &Scan Parameters"), "bookmark_add", CTRL+Key_S,
		       m_view, SLOT(slSaveScanParams()),
		       actionCollection(), "savescanparam" );
#endif

    (void) new KAction(i18n("Select Scan Device"), "scanner", 0,
		       m_view, SLOT( slSelectDevice()),
		       actionCollection(), "selectsource" );

    (void) new KAction( i18n("Enable All Warnings && Messages"), 0,
			this,  SLOT(slEnableWarnings()),
			actionCollection(), "enable_msgs");


    m_saveOCRTextAction = new KAction( i18n("Save OCR Res&ult Text"), "filesaveas", CTRL+Key_U,
                                       m_view, SLOT(slSaveOCRResult()),
                                       actionCollection(), "saveOCRResult");
}
Example #20
0
MQLEdit::MQLEdit(QWidget* parent, Qt::WindowFlags fl)
    : QWidget(parent, fl)
{
  setupUi(this);

  if (OpenRPT::name.isEmpty())
    OpenRPT::name = tr("MetaSQL Editor");

  _mqlSelector = 0;
  _document = _text->document();
  _document->setDefaultFont(QFont("Courier"));

  connect(_document,     SIGNAL(modificationChanged(bool)), this, SLOT(setWindowModified(bool)));
  connect(editFindAction,              SIGNAL(triggered()), this, SLOT(editFind()));
  connect(fileDatabaseConnectAction,   SIGNAL(triggered()), this, SLOT(fileDatabaseConnect()));
  connect(fileDatabaseDisconnectAction,SIGNAL(triggered()), this, SLOT(fileDatabaseDisconnect()));
  connect(fileDatabaseOpenAction,      SIGNAL(triggered()), this, SLOT(fileDatabaseOpen()));
  connect(fileDatabaseSaveAsAction,    SIGNAL(triggered()), this, SLOT(fileDatabaseSaveAs()));
  connect(fileExitAction,              SIGNAL(triggered()), this, SLOT(fileExit()));
  connect(fileNewAction,               SIGNAL(triggered()), this, SLOT(fileNew()));
  connect(fileOpenAction,              SIGNAL(triggered()), this, SLOT(fileOpen()));
  connect(filePrintAction,             SIGNAL(triggered()), this, SLOT(filePrint()));
  connect(fileSaveAction,              SIGNAL(triggered()), this, SLOT(fileSave()));
  connect(fileSaveAsAction,            SIGNAL(triggered()), this, SLOT(fileSaveAs()));
  connect(helpAboutAction,             SIGNAL(triggered()), this, SLOT(helpAbout()));
  connect(helpContentsAction,          SIGNAL(triggered()), this, SLOT(helpContents()));
  connect(helpIndexAction,             SIGNAL(triggered()), this, SLOT(helpIndex()));
  connect(searchForParametersAction,   SIGNAL(triggered()), this, SLOT(populateParameterEdit()));
  connect(toolsExecute_QueryAction,    SIGNAL(triggered()), this, SLOT(execQuery()));
  connect(toolsParse_QueryAction,      SIGNAL(triggered()), this, SLOT(parseQuery()));
  connect(viewExecuted_SQLAction,      SIGNAL(triggered()), this, SLOT(showExecutedSQL()));
  connect(viewLog_OutputAction,        SIGNAL(triggered()), this, SLOT(showLog()));
  connect(viewParameter_ListAction,    SIGNAL(triggered()), this, SLOT(showParamList()));
  connect(viewResultsAction,           SIGNAL(triggered()), this, SLOT(showResults()));

  QSqlDatabase db = QSqlDatabase().database();
  if(db.isValid() && db.isOpen())
    OpenRPT::loggedIn = true;
  else
  {
    OpenRPT::loggedIn = false;
    db = QSqlDatabase();
  }

  if (parent) // then must be embedded
  {
    if (DEBUG)
      qDebug("MQLEdit::MQLEdit(%p) OpenRPT::loggedIn = %d",
             parent, OpenRPT::loggedIn);
    fileDatabaseConnectAction->setVisible(! OpenRPT::loggedIn);
    fileDatabaseDisconnectAction->setVisible(! OpenRPT::loggedIn);

    fileExitAction->setText(tr("Close"));

    QToolBar *menuproxy = new QToolBar(this);
    menuproxy->setObjectName("menuproxy");
    menuproxy->setOrientation(Qt::Horizontal);
    verticalLayout->insertWidget(0, menuproxy);

    menuproxy->addAction(fileMenu->menuAction());
    menuproxy->addAction(editMenu->menuAction());
    menuproxy->addAction(ViewMenu->menuAction());
    menuproxy->addAction(ToolsMenu->menuAction());
    menuproxy->addAction(helpMenu->menuAction());
  }
  
  fileDatabaseConnectAction->setEnabled(!OpenRPT::loggedIn);
  fileDatabaseDisconnectAction->setEnabled(OpenRPT::loggedIn);
  fileDatabaseOpenAction->setEnabled(OpenRPT::loggedIn);
  fileDatabaseSaveAsAction->setEnabled(OpenRPT::loggedIn);
  
  _pEdit   = new ParameterEdit(this, Qt::Window);
  _log     = new LogOutput(this);
  _sql     = new LogOutput(this);
  _results = new ResultsOutput(this);

  _highlighter = new MetaSQLHighlighter(_document);

  clear();

  setDestType(MQLUnknown);
}
Example #21
0
void TaskJuggler::setupActions()
{
    // "File" menu
    KStdAction::openNew(this, SLOT(fileNew()), actionCollection());
    new KAction(i18n("New &Include File" ), "file_temporary", KShortcut(),
                this, SLOT(fileNewInclude()),
                actionCollection(), "new_include");
    KStdAction::open(this, SLOT(fileOpen()), actionCollection());
    KStdAction::close(this, SLOT(fileClose()), actionCollection());
    KStdAction::print(this, SLOT(filePrint()), actionCollection());
    KStdAction::quit(kapp, SLOT(closeAllWindows()), actionCollection());

    // Setup "Open Recent" menu and load old recent files.
    m_recentAction = KStdAction::openRecent(this, SLOT(load(const KURL&)),
                                            actionCollection());


    // "Goto" menu
    new KAction(i18n("Tas&ks"), "tj_task_group", KShortcut(KKey("ALT+k")),
                m_view, SLOT(setFocusToTaskList()),
                actionCollection(), "tasks");
    new KAction(i18n("&Resources"), "tj_resource_group",
                KShortcut(KKey("ALT+r")),
                m_view, SLOT(setFocusToResourceList()),
                actionCollection(), "resources");
    new KAction(i18n("&Accounts"), "tj_account_group",
                KShortcut(KKey("ALT+a")),
                m_view, SLOT(setFocusToAccountList()),
                actionCollection(), "accounts");
    new KAction(i18n("Re&ports"), "tj_report_list", KShortcut(KKey("ALT+p")),
                m_view, SLOT(setFocusToReportList()),
                actionCollection(), "reports");
    new KAction(i18n("F&iles"), "tj_file_list", KShortcut(KKey("ALT+i")),
                m_view, SLOT(setFocusToFileList()),
                actionCollection(), "files");
    new KAction(i18n("E&ditor"), "tj_editor", KShortcut("ALT+d"),
                m_view, SLOT(setFocusToEditor()),
                actionCollection(), "editor");
    new KAction(i18n("Rep&ort"), "tj_report", KShortcut("ALT+o"),
                m_view, SLOT(setFocusToReport()),
                actionCollection(), "report");

    // "Tools" menu
    new KAction(i18n("&Schedule"), "tj_schedule", KShortcut(KKey("F9")),
                m_view, SLOT(schedule()),
                actionCollection(), "schedule");
    new KAction(i18n("Stop scheduling"), "stop", 0,
                m_view, SLOT(stop()),
                actionCollection(), "stop");
    new KAction(i18n("&Generate all Reports"), 0, 0,
                m_view, SLOT(generate()),
                actionCollection(), "generate");
    new KAction(i18n("Goto &previous Problem"), "tj_previous_problem",
                KShortcut(KKey("F10")),
                m_view, SLOT(previousProblem()),
                actionCollection(), "previous_problem");
    new KAction(i18n("Goto &next Problem"), "tj_next_problem",
                KShortcut(KKey("F11")),
                m_view, SLOT(nextProblem()),
                actionCollection(), "next_problem");

    new KAction(i18n("Zoom &In"), "viewmag+", KShortcut(KKey("F7")),
                m_view, SLOT(zoomIn()),
                actionCollection(), "zoom_in");
    new KAction(i18n("Zoom &Out"), "viewmag-", KShortcut(KKey("F8")),
                m_view, SLOT(zoomOut()),
                actionCollection(), "zoom_out");

    // "Help" menu
    new KAction(i18n("Tip of the day"), "idea", 0, this,
                SLOT(showTip()), actionCollection(), "tip");
    new KAction(i18n("Explain Keyword"), "tj_keyword_help",
                KShortcut(KKey("F2")),
                m_view, SLOT(keywordHelp()),
                actionCollection(), "keyword_help");
    new KAction(i18n("Tutorial"), "tj_tutorial", 0,
                m_view, SLOT(tutorial()),
                actionCollection(), "tutorial");

    setupGUI(ToolBar | Keys | StatusBar | Save | Create);
}
Example #22
0
void TextEdit::setupFileActions()
{
    QToolBar *tb = new QToolBar(this);
    tb->setWindowTitle(tr("File Actions"));
    addToolBar(tb);

    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    a = new QAction(QIcon(rsrcPath + "/filenew.png"), tr("&New"), this);
    a->setShortcut(QKeySequence::New);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon(rsrcPath + "/fileopen.png"), tr("&Open..."), this);
    a->setShortcut(QKeySequence::Open);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon(rsrcPath + "/filesave.png"), tr("&Save"), this);
    a->setShortcut(QKeySequence::Save);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(tr("Save &As..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    menu->addAction(a);
    menu->addSeparator();

#ifndef QT_NO_PRINTER
    a = new QAction(QIcon(rsrcPath + "/fileprint.png"), tr("&Print..."), this);
    a->setShortcut(QKeySequence::Print);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon(rsrcPath + "/fileprint.png"), tr("Print Preview..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPreview()));
    menu->addAction(a);

    a = new QAction(QIcon(rsrcPath + "/exportpdf.png"), tr("&Export PDF..."), this);
    a->setShortcut(Qt::CTRL + Qt::Key_D);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPdf()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();
#endif

    a = new QAction(tr("&Quit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    connect(a, SIGNAL(triggered()), this, SLOT(close()));
    menu->addAction(a);
}
LDViewMainWindow::LDViewMainWindow(QApplication *a)
	:QMainWindow(),Ui::LDView(),
	fileSeparatorIndex(-1),
	toolbarMaxStep(new QLabel),
	toolbarCurrentStep(new QLabel),
	toolbarStepLabel(new QLabel("Step :")),
	toolbarViewAngle(NULL),
	toolbarWireframeMenu(new QMenu(this)),
	edgeMenu(new QMenu(this)),
	bfcMenu(new QMenu(this)),
	primitiveMenu(new QMenu(this))
{
    setupUi(this);
	toolbar->insertWidget(toolbarFirstStep,toolbarStepLabel);
	toolbar->insertWidget(toolbarFirstStep,toolbarCurrentStep);
	toolbar->insertWidget(toolbarFirstStep,toolbarMaxStep);
    if (modelViewer) modelViewer->setMainWindow(this);
    connect( fileOpenAction, SIGNAL( triggered() ), this, SLOT( fileOpen() ) );
    connect( fileSaveSettingsAction, SIGNAL( triggered() ), this, SLOT( fileSaveSettings() ) );
    connect( fileExportAction, SIGNAL( triggered() ), this, SLOT( fileExport() ) );
    connect( fileExportOptionAction, SIGNAL( triggered() ), this, SLOT( fileExportOption() ) );
	connect( file3DSExportOptionAction, SIGNAL( triggered() ), this, SLOT( file3DSExportOption() ) );
    connect( fileJPEGOptionsAction, SIGNAL( triggered() ), this, SLOT( fileJPEGOptions() ) );
    connect( fileSaveAction, SIGNAL( triggered() ), this, SLOT( fileSave() ) );
    connect( filePrintAction, SIGNAL( triggered() ), this, SLOT( filePrint() ) );
    connect( fileExitAction, SIGNAL( triggered() ), this, SLOT( fileExit() ) );
    connect( helpContentsAction, SIGNAL( triggered() ), this, SLOT( helpContents() ) );
    connect( helpAboutAction, SIGNAL( triggered() ), this, SLOT( helpAbout() ) );
    connect( helpAboutQtAction, SIGNAL( triggered() ), this, SLOT( helpAboutQt() ) );
    connect( editPreferencesAction, SIGNAL( triggered() ), this, SLOT( editPreferences() ) );
    connect( viewToolBarAction, SIGNAL( toggled(bool) ), this, SLOT( viewToolBar(bool) ) );
    connect( toolbarWireframeAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarWireframe(bool) ) );
    connect( toolbarEdgeAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarEdge(bool) ) );
    connect( toolbarPrimitiveSubstitutionAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarPrimitiveSubstitution(bool) ) );
    connect( toolbarLightingAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarLighting(bool) ) );
    connect( toolbarBFCAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarBFC(bool) ) );
    connect( toolbarAxesAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarAxes(bool) ) );
    connect( toolbarSeamsAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarSeams(bool) ) );
    connect( viewStatusBarAction, SIGNAL( toggled(bool) ), this, SLOT( viewStatusBar(bool) ) );
    connect( viewLatitudeRotationAction, SIGNAL( toggled(bool) ), this, SLOT( latitudeRotation(bool) ) );
    connect( viewKeepRightSideUpAction, SIGNAL( toggled(bool) ), this, SLOT( keepRightSideUp(bool) ) );
    connect( viewFullScreenAction, SIGNAL( triggered() ), this, SLOT( viewFullScreen() ) );
    connect( viewResetViewAction, SIGNAL( triggered() ), this, SLOT( viewResetView() ) );
    connect( helpOpenGLDriverInfoAction, SIGNAL( triggered() ), this, SLOT( helpOpenGLDriverInfo() ) );
    connect( fileLDrawDirAction, SIGNAL( triggered() ), this, SLOT( fileLDrawDir() ) );
    connect( fileExtraDirAction, SIGNAL( triggered() ), this, SLOT( fileExtraDir() ) );
    connect( fileCheckForUpdatesAction, SIGNAL( triggered() ), this, SLOT( fileCheckForUpdates() ) );
    connect( fileReloadAction, SIGNAL( triggered() ), this, SLOT( fileReload() ) );
    connect( viewShowErrorsAction, SIGNAL( triggered() ), this, SLOT( viewShowErrors() ) );
    connect( pollActionGroup, SIGNAL( triggered(QAction*) ), this, SLOT( pollChanged(QAction*) ) );
    connect( viewZoomToFitAction, SIGNAL( triggered() ), this, SLOT( viewZoomToFit() ) );
	connect( viewRightSideUpAction, SIGNAL( triggered() ), this, SLOT( viewRightSideUp() ) );
    connect( viewModeActionGroup, SIGNAL( triggered(QAction*) ), this, SLOT( viewModeChanged(QAction*) ) );
    connect( frontViewAngleAction, SIGNAL( triggered() ), this, SLOT( frontViewAngle() ) );
    connect( backViewAngleAction, SIGNAL( triggered() ), this, SLOT( backViewAngle() ) );
    connect( leftViewAngleAction, SIGNAL( triggered() ), this, SLOT( leftViewAngle() ) );
    connect( rightViewAngleAction, SIGNAL( triggered() ), this, SLOT( rightViewAngle() ) );
    connect( topViewAngleAction, SIGNAL( triggered() ), this, SLOT( topViewAngle() ) );
    connect( bottomViewAngleAction, SIGNAL( triggered() ), this, SLOT( bottomViewAngle() ) );
    connect( latLongViewAngleAction, SIGNAL( triggered() ), this, SLOT( latLongViewAngle() ) );
    connect( isoViewAngleAction, SIGNAL( triggered() ), this, SLOT( isoViewAngle() ) );
    connect( saveDefaultViewAngleAction, SIGNAL( triggered() ), this, SLOT( saveDefaultViewAngle() ) );
    connect( fileCancelLoadAction, SIGNAL( triggered() ), this, SLOT( fileCancelLoad() ) );
    connect( showViewInfoAction, SIGNAL( triggered() ), this, SLOT( showViewInfo() ) );
    connect( showPovCameraAction, SIGNAL( triggered() ), this, SLOT( showPovCamera() ) );
    connect( showPovAspectRatioAction, SIGNAL( toggled(bool) ), this, SLOT( showPovAspectRatio(bool) ) );
    connect( toolsPartListAction, SIGNAL( triggered() ), this, SLOT( toolsPartList() ) );
    connect( toolbarPrevStep, SIGNAL( triggered() ), this, SLOT( prevStep() ) );
    connect( toolbarNextStep, SIGNAL( triggered() ), this, SLOT( nextStep() ) );
    connect( toolbarFirstStep, SIGNAL( triggered() ), this, SLOT( firstStep() ) );
    connect( toolbarLastStep, SIGNAL( triggered() ), this, SLOT( lastStep() ) );
    connect( stepGoto, SIGNAL( triggered() ), this, SLOT( gotoStep() ) );
    connect( toolsModelTreeAction, SIGNAL( triggered() ), this, SLOT( toolsModelTree() ) );
    connect( toolsBoundingBoxAction, SIGNAL( triggered() ), this, SLOT( toolsBoundingBox() ) );
    connect( toolsMpdModelSelectionAction, SIGNAL( triggered() ), this, SLOT( toolsMpdModelSelection() ) );

    connect(fileMenu, SIGNAL(aboutToShow()), this, SLOT(doFileMenuAboutToShow()));
    connect(editMenu, SIGNAL(aboutToShow()), this, SLOT(doEditMenuAboutToShow()));
    connect(viewMenu, SIGNAL(aboutToShow()), this, SLOT(doViewMenuAboutToShow()));
    connect(toolsMenu,SIGNAL(aboutToShow()), this, SLOT(doToolsMenuAboutToShow()));
    connect(helpMenu, SIGNAL(aboutToShow()), this, SLOT(doHelpMenuAboutToShow()));

	int cnt,i;
	QAction *item;
    for ( cnt = i = 0; ; i++)
    {
        item = fileMenu->actions()[i];
        if (item->isSeparator())
        {
            if (++cnt == 2)
                break;
        }
    }
    fileSeparatorIndex = i;
#ifdef __APPLE__
    fileMenu->removeItemAt(fileSeparatorIndex);
    fileSeparatorIndex = -1;
    openRecentMenu = new QMenu(this, "openRecentMenu");
    fileMenu->insertItem("Open Recent", openRecentMenu, -1, 1);
#endif // __APPLE__
    if (!recentFiles)
    {
        recentFiles = new TCStringArray(10);
        populateRecentFiles();
    }
    populateRecentFileMenuItems();
	setupStandardSizes();
#ifdef __APPLE__
        // Since Preferences is the only item in the edit menu, we need to
        // delete the edit menu on the Mac, since the item is going to get
        // magically moved to the LDView menu.  The problem is, if we delete
        // the edit menu, the magic stops working, since it's apparently all
        // done on the fly.  So, we're going to create a new fully-functional
        // Preferences menu item at the top of the File menu, and THEN delete
        // the edit menu.  This newly created menu item won't be visible to the
        // user, but it will make the other one continue to function after the
        // deletion of the edit menu.
        fileMenu->insertItem("Preferences", this, SLOT(doPreferences()),
            0, -1, 0);
        // Remove the (empty without Preferences) edit menu.
        menuBar->removeItem(menuBar->idAt(1));
#endif //__APPLE__
	toolbarViewAngle = new QToolButton(toolbar);
	toolbarViewAngle->setMenu(viewingAnglePopupMenu);
	toolbarViewAngle->setPopupMode(QToolButton::InstantPopup);
	toolbarViewAngle->setIcon(QPixmap( ":/images/images/toolbar_view.png"));
	toolbarViewAngle->setEnabled(false);
	toolbar->insertWidget(editPreferencesAction,toolbarViewAngle);
	connect( wireframeFogAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarWireframeFog(bool) ) );
	connect( wireframeRemoveHiddenLinesAction, SIGNAL( toggled(bool) ), this, SLOT( toolbarWireframeRemoveHiddenLines(bool) ) );
	toolbarWireframeMenu->addAction(wireframeFogAction);
	toolbarWireframeMenu->addAction(wireframeRemoveHiddenLinesAction);
	QToolButton *toolbarWireframe =
		(QToolButton *)toolbar->widgetForAction(toolbarWireframeAction);	
	if (toolbarWireframe != NULL)
	{
		toolbarWireframe->setMenu(toolbarWireframeMenu);
		toolbarWireframe->setPopupMode(QToolButton::MenuButtonPopup);
	}
	connect( textureStudAction, SIGNAL( toggled(bool) ), this, SLOT( textureStud(bool) ) );
	primitiveMenu->addAction(textureStudAction);
	QToolButton *toolbarPrimitives =
		(QToolButton *)toolbar->widgetForAction(toolbarPrimitiveSubstitutionAction);
	if (toolbarPrimitives)
	{
		toolbarPrimitives->setMenu(primitiveMenu);
		toolbarPrimitives->setPopupMode(QToolButton::MenuButtonPopup);
	}
	connect( edgeShowEdgeOnlyAction, SIGNAL( toggled(bool) ), this, SLOT( edgeShowEdgeOnly(bool) ) );
	connect( edgeConditionalLineAction, SIGNAL( toggled(bool) ), this, SLOT( edgeConditionalLine(bool) ) );
	connect( edgeHighQualityAction, SIGNAL( toggled(bool) ), this, SLOT( edgeHighQuality(bool) ) );
	connect( edgeAlwaysBlackAction, SIGNAL( toggled(bool) ), this, SLOT( edgeAlwaysBlack(bool) ) );
	edgeMenu->addAction(edgeShowEdgeOnlyAction);
	edgeMenu->addAction(edgeConditionalLineAction);
	edgeMenu->addAction(edgeHighQualityAction);
	edgeMenu->addAction(edgeAlwaysBlackAction);
	QToolButton *toolbarEdge =
		(QToolButton *)toolbar->widgetForAction(toolbarEdgeAction);
	if (toolbarEdge)
	{
		toolbarEdge->setMenu(edgeMenu);
		toolbarEdge->setPopupMode(QToolButton::MenuButtonPopup);
	}
	connect( bfcRedBackFacesAction, SIGNAL( toggled(bool) ), this, SLOT( bfcRedBackFaces(bool) ) );
	connect( bfcGreenFrontFacesAction, SIGNAL( toggled(bool) ), this, SLOT( bfcGreenFrontFaces(bool) ) );
	connect( bfcBlueNeutralFacesAction, SIGNAL( toggled(bool) ), this, SLOT( bfcBlueNeutralFaces(bool) ) );
	bfcMenu->addAction(bfcRedBackFacesAction);
	bfcMenu->addAction(bfcGreenFrontFacesAction);
	bfcMenu->addAction(bfcBlueNeutralFacesAction);
	QToolButton *toolbarBfc =
		(QToolButton *)toolbar->widgetForAction(toolbarBFCAction);
	if (toolbarBfc)
	{
		toolbarBfc->setMenu(bfcMenu);
		toolbarBfc->setPopupMode(QToolButton::MenuButtonPopup);
	}
    modelViewer->setApplication(a);
}
Example #24
0
void
MainWindow::setupFileActions()
{
    QToolBar *tb = new QToolBar(this);
    tb->setWindowTitle(tr("File Actions"));
    addToolBar(tb);

    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    QIcon newIcon = QIcon::fromTheme("document-new", QIcon(rsrcPath + "/filenew.png"));
    a = new QAction( newIcon, tr("&New"), this);
    a->setPriority(QAction::LowPriority);
    a->setShortcut(QKeySequence::New);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon::fromTheme("document-open", QIcon(rsrcPath + "/fileopen.png")), tr("&Open..."), this);
    a->setShortcut(QKeySequence::Open);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon::fromTheme("document-save", QIcon(rsrcPath + "/filesave.png")), tr("&Save"), this);
    a->setShortcut(QKeySequence::Save);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(tr("Save &As..."), this);
    a->setPriority(QAction::LowPriority);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    menu->addAction(a);
    menu->addSeparator();

#ifndef QT_NO_PRINTER
    a = new QAction(QIcon::fromTheme("document-print", QIcon(rsrcPath + "/fileprint.png")), tr("&Print..."), this);
    a->setPriority(QAction::LowPriority);
    a->setShortcut(QKeySequence::Print);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon::fromTheme("fileprint", QIcon(rsrcPath + "/fileprint.png")),
                    tr("Print Preview..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPreview()));
    menu->addAction(a);

    a = new QAction(QIcon::fromTheme("exportpdf", QIcon(rsrcPath + "/exportpdf.png")),
                    tr("&Export PDF..."), this);
    a->setPriority(QAction::LowPriority);
    a->setShortcut(Qt::CTRL + Qt::Key_D);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPdf()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();
#endif

    a = new QAction(tr("&Quit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    //connect(a, SIGNAL(triggered()), this, SLOT(close()));
    connect(a, &QAction::triggered, this, [&](){
            ADDEBUG() << "close...";
            close();
        });
    menu->addAction(a);
}
Example #25
0
void TextEdit::setupFileActions()
{
    standardToolBar = new QToolBar(this);
    standardToolBar->setWindowTitle(tr("File Actions"));
    addToolBar(standardToolBar);

    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    a = new QAction( QIcon(":/res/smallNew.png"), tr("&New"), this);
    a->setPriority(QAction::LowPriority);
    a->setShortcut(QKeySequence::New);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    standardToolBar->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon(":/res/smallOpen.png"), tr("&Open..."), this);
    a->setShortcut(QKeySequence::Open);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    standardToolBar->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon(":/res/smallSave.png"),tr("&Save"), this);
    a->setShortcut(QKeySequence::Save);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    standardToolBar->addAction(a);
    menu->addAction(a);

    a = new QAction(tr("Save &As..."), this);
    a->setPriority(QAction::LowPriority);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    menu->addAction(a);
    menu->addSeparator();

#ifndef QT_NO_PRINTER
    a = new QAction(QIcon(":/res/smallPrint.png"),tr("&Print..."), this);
    a->setPriority(QAction::LowPriority);    
    a->setShortcut(QKeySequence::Print);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    standardToolBar->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon(":/res/smallPrintPreview.png"),tr("Print Preview..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPreview()));
    menu->addAction(a);

    a = new QAction(QIcon(":/res/smallSavePDF.png"),tr("&Export PDF..."), this);
    a->setPriority(QAction::LowPriority);
    a->setShortcut(Qt::CTRL + Qt::Key_D);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrintPdf()));
    standardToolBar->addAction(a);
    menu->addAction(a);

    menu->addSeparator();
#endif

    a = new QAction(tr("&Quit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    connect(a, SIGNAL(triggered()), this, SLOT(close()));
    menu->addAction(a);
}
Example #26
0
void LiteEditor::createActions()
{
    LiteApi::IActionContext *actionContext = m_liteApp->actionManager()->getActionContext(this,"Editor");

    m_undoAct = new QAction(QIcon("icon:liteeditor/images/undo.png"),tr("Undo"),this);
    actionContext->regAction(m_undoAct,"Undo",QKeySequence::Undo);

    m_redoAct = new QAction(QIcon("icon:liteeditor/images/redo.png"),tr("Redo"),this);
    actionContext->regAction(m_redoAct,"Redo","Ctrl+Shift+Z; Ctrl+Y");

    m_cutAct = new QAction(QIcon("icon:liteeditor/images/cut.png"),tr("Cut"),this);
    actionContext->regAction(m_cutAct,"Cut",QKeySequence::Cut);

    m_copyAct = new QAction(QIcon("icon:liteeditor/images/copy.png"),tr("Copy"),this);
    actionContext->regAction(m_copyAct,"Copy",QKeySequence::Copy);

    m_pasteAct = new QAction(QIcon("icon:liteeditor/images/paste.png"),tr("Paste"),this);
    actionContext->regAction(m_pasteAct,"Paste",QKeySequence::Paste);

    m_selectAllAct = new QAction(tr("Select All"),this);
    actionContext->regAction(m_selectAllAct,"SelectAll",QKeySequence::SelectAll);

    m_exportHtmlAct = new QAction(QIcon("icon:liteeditor/images/exporthtml.png"),tr("Export HTML..."),this);
#ifndef QT_NO_PRINTER
    m_exportPdfAct = new QAction(QIcon("icon:liteeditor/images/exportpdf.png"),tr("Export PDF..."),this);
    m_filePrintAct = new QAction(QIcon("icon:liteeditor/images/fileprint.png"),tr("Print..."),this);
    m_filePrintPreviewAct = new QAction(QIcon("icon:liteeditor/images/fileprintpreview.png"),tr("Print Preview..."),this);
#endif
    m_gotoPrevBlockAct = new QAction(tr("Go To Previous Block"),this);
    actionContext->regAction(m_gotoPrevBlockAct,"GotoPreviousBlock","Ctrl+[");

    m_gotoNextBlockAct = new QAction(tr("Go To Next Block"),this);
    actionContext->regAction(m_gotoNextBlockAct,"GotoNextBlock","Ctrl+]");


    m_selectBlockAct = new QAction(tr("Select Block"),this);
    actionContext->regAction(m_selectBlockAct,"SelectBlock","Ctrl+U");

    m_gotoMatchBraceAct = new QAction(tr("Go To Matching Brace"),this);
    actionContext->regAction(m_gotoMatchBraceAct,"GotoMatchBrace","Ctrl+E");

    m_foldAct = new QAction(tr("Fold"),this);   
    actionContext->regAction(m_foldAct,"Fold","Ctrl+<");

    m_unfoldAct = new QAction(tr("Unfold"),this);
    actionContext->regAction(m_unfoldAct,"Unfold","Ctrl+>");

    m_foldAllAct = new QAction(tr("Fold All"),this);
    actionContext->regAction(m_foldAllAct,"FoldAll","");

    m_unfoldAllAct = new QAction(tr("Unfold All"),this);
    actionContext->regAction(m_unfoldAllAct,"UnfoldAll","");

    connect(m_foldAct,SIGNAL(triggered()),m_editorWidget,SLOT(fold()));
    connect(m_unfoldAct,SIGNAL(triggered()),m_editorWidget,SLOT(unfold()));
    connect(m_foldAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(foldAll()));
    connect(m_unfoldAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(unfoldAll()));

    m_gotoLineAct = new QAction(tr("Go To Line"),this);
    actionContext->regAction(m_gotoLineAct,"GotoLine","Ctrl+L");

    m_lockAct = new QAction(QIcon("icon:liteeditor/images/lock.png"),tr("Locked"),this);
    m_lockAct->setEnabled(false);

    m_duplicateAct = new QAction(tr("Duplicate"),this);
    actionContext->regAction(m_duplicateAct,"Duplicate","Ctrl+D");

    connect(m_duplicateAct,SIGNAL(triggered()),m_editorWidget,SLOT(duplicate()));

    m_deleteLineAct = new QAction(tr("Delete Line"),this);
    actionContext->regAction(m_deleteLineAct,"DeleteLine","Ctrl+Shift+K");

    connect(m_deleteLineAct,SIGNAL(triggered()),m_editorWidget,SLOT(deleteLine()));

    m_insertLineBeforeAct = new QAction(tr("Insert Line Before"),this);
    actionContext->regAction(m_insertLineBeforeAct,"InsertLineBefore","Ctrl+Shift+Return");
    connect(m_insertLineBeforeAct,SIGNAL(triggered()),m_editorWidget,SLOT(insertLineBefore()));

    m_insertLineAfterAct = new QAction(tr("Insert Line After"),this);
    actionContext->regAction(m_insertLineAfterAct,"InsertLineAfter","Ctrl+Return");
    connect(m_insertLineAfterAct,SIGNAL(triggered()),m_editorWidget,SLOT(insertLineAfter()));

    m_increaseFontSizeAct = new QAction(tr("Increase Font Size"),this);
    actionContext->regAction(m_increaseFontSizeAct,"IncreaseFontSize","Ctrl++;Ctrl+=");

    m_decreaseFontSizeAct = new QAction(tr("Decrease Font Size"),this);
    actionContext->regAction(m_decreaseFontSizeAct,"DecreaseFontSize","Ctrl+-");

    m_resetFontSizeAct = new QAction(tr("Reset Font Size"),this);
    actionContext->regAction(m_resetFontSizeAct,"ResetFontSize","Ctrl+0");

    m_cleanWhitespaceAct = new QAction(tr("Clean Whitespace"),this);
    actionContext->regAction(m_cleanWhitespaceAct,"CleanWhitespace","");

    m_wordWrapAct = new QAction(tr("Word Wrap"),this);
    m_wordWrapAct->setCheckable(true);
    actionContext->regAction(m_wordWrapAct,"WordWrap","");

//    m_widget->addAction(m_foldAct);
//    m_widget->addAction(m_unfoldAct);
//    m_widget->addAction(m_gotoLineAct);

//    m_widget->addAction(m_gotoPrevBlockAct);
//    m_widget->addAction(m_gotoNextBlockAct);
//    m_widget->addAction(m_selectBlockAct);
//    m_widget->addAction(m_gotoMatchBraceAct);

    connect(m_editorWidget,SIGNAL(undoAvailable(bool)),m_undoAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(redoAvailable(bool)),m_redoAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(copyAvailable(bool)),m_cutAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(copyAvailable(bool)),m_copyAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(wordWrapChanged(bool)),m_wordWrapAct,SLOT(setChecked(bool)));

    connect(m_undoAct,SIGNAL(triggered()),m_editorWidget,SLOT(undo()));
    connect(m_redoAct,SIGNAL(triggered()),m_editorWidget,SLOT(redo()));
    connect(m_cutAct,SIGNAL(triggered()),m_editorWidget,SLOT(cut()));
    connect(m_copyAct,SIGNAL(triggered()),m_editorWidget,SLOT(copy()));
    connect(m_pasteAct,SIGNAL(triggered()),m_editorWidget,SLOT(paste()));
    connect(m_selectAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(selectAll()));
    connect(m_selectBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(selectBlock()));

    connect(m_exportHtmlAct,SIGNAL(triggered()),this,SLOT(exportHtml()));
#ifndef QT_NO_PRINTER
    connect(m_exportPdfAct,SIGNAL(triggered()),this,SLOT(exportPdf()));
    connect(m_filePrintAct,SIGNAL(triggered()),this,SLOT(filePrint()));
    connect(m_filePrintPreviewAct,SIGNAL(triggered()),this,SLOT(filePrintPreview()));
#endif
    connect(m_gotoPrevBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoPrevBlock()));
    connect(m_gotoNextBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoNextBlock()));
    connect(m_gotoMatchBraceAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoMatchBrace()));
    connect(m_gotoLineAct,SIGNAL(triggered()),this,SLOT(gotoLine()));
    connect(m_increaseFontSizeAct,SIGNAL(triggered()),this,SLOT(increaseFontSize()));
    connect(m_decreaseFontSizeAct,SIGNAL(triggered()),this,SLOT(decreaseFontSize()));
    connect(m_resetFontSizeAct,SIGNAL(triggered()),this,SLOT(resetFontSize()));
    connect(m_cleanWhitespaceAct,SIGNAL(triggered()),m_editorWidget,SLOT(cleanWhitespace()));
    connect(m_wordWrapAct,SIGNAL(triggered(bool)),m_editorWidget,SLOT(setWordWrapOverride(bool)));

    QClipboard *clipboard = QApplication::clipboard();
    connect(clipboard,SIGNAL(dataChanged()),this,SLOT(clipbordDataChanged()));
    clipbordDataChanged();
}
Example #27
0
void LiteEditor::createActions()
{
    LiteApi::IActionContext *actionContext = m_liteApp->actionManager()->getActionContext(this,"Editor");

    m_undoAct = new QAction(QIcon("icon:liteeditor/images/undo.png"),tr("Undo"),this);
    actionContext->regAction(m_undoAct,"Undo",QKeySequence::Undo);

    m_redoAct = new QAction(QIcon("icon:liteeditor/images/redo.png"),tr("Redo"),this);
    actionContext->regAction(m_redoAct,"Redo","Ctrl+Shift+Z; Ctrl+Y");

    m_cutAct = new QAction(QIcon("icon:liteeditor/images/cut.png"),tr("Cut"),this);
    actionContext->regAction(m_cutAct,"Cut",QKeySequence::Cut);

    m_copyAct = new QAction(QIcon("icon:liteeditor/images/copy.png"),tr("Copy"),this);
    actionContext->regAction(m_copyAct,"Copy",QKeySequence::Copy);

    m_pasteAct = new QAction(QIcon("icon:liteeditor/images/paste.png"),tr("Paste"),this);
    actionContext->regAction(m_pasteAct,"Paste",QKeySequence::Paste);

    m_selectAllAct = new QAction(tr("Select All"),this);
    actionContext->regAction(m_selectAllAct,"SelectAll",QKeySequence::SelectAll);

    m_exportHtmlAct = new QAction(QIcon("icon:liteeditor/images/exporthtml.png"),tr("Export HTML..."),this);
#ifndef QT_NO_PRINTER
    m_exportPdfAct = new QAction(QIcon("icon:liteeditor/images/exportpdf.png"),tr("Export PDF..."),this);
    m_filePrintAct = new QAction(QIcon("icon:liteeditor/images/fileprint.png"),tr("Print..."),this);
    m_filePrintPreviewAct = new QAction(QIcon("icon:liteeditor/images/fileprintpreview.png"),tr("Print Preview..."),this);
#endif
    m_gotoPrevBlockAct = new QAction(tr("Go To Previous Block"),this);
    actionContext->regAction(m_gotoPrevBlockAct,"GotoPreviousBlock","Ctrl+[");

    m_gotoNextBlockAct = new QAction(tr("Go To Next Block"),this);
    actionContext->regAction(m_gotoNextBlockAct,"GotoNextBlock","Ctrl+]");


    m_selectBlockAct = new QAction(tr("Select Block"),this);
    actionContext->regAction(m_selectBlockAct,"SelectBlock","Ctrl+U");

    m_gotoMatchBraceAct = new QAction(tr("Go To Matching Brace"),this);
    actionContext->regAction(m_gotoMatchBraceAct,"GotoMatchBrace","Ctrl+E");

    m_foldAct = new QAction(tr("Fold"),this);   
    actionContext->regAction(m_foldAct,"Fold","Ctrl+<");

    m_unfoldAct = new QAction(tr("Unfold"),this);
    actionContext->regAction(m_unfoldAct,"Unfold","Ctrl+>");

    m_foldAllAct = new QAction(tr("Fold All"),this);
    actionContext->regAction(m_foldAllAct,"FoldAll","");

    m_unfoldAllAct = new QAction(tr("Unfold All"),this);
    actionContext->regAction(m_unfoldAllAct,"UnfoldAll","");

    connect(m_foldAct,SIGNAL(triggered()),m_editorWidget,SLOT(fold()));
    connect(m_unfoldAct,SIGNAL(triggered()),m_editorWidget,SLOT(unfold()));
    connect(m_foldAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(foldAll()));
    connect(m_unfoldAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(unfoldAll()));

    m_gotoLineAct = new QAction(tr("Go To Line"),this);
    actionContext->regAction(m_gotoLineAct,"GotoLine","Ctrl+L");

    m_lockAct = new QAction(QIcon("icon:liteeditor/images/lock.png"),tr("Locked"),this);
    m_lockAct->setEnabled(false);

    m_duplicateAct = new QAction(tr("Duplicate"),this);
    actionContext->regAction(m_duplicateAct,"Duplicate","Ctrl+Shift+D");
    connect(m_duplicateAct,SIGNAL(triggered()),m_editorWidget,SLOT(duplicate()));

    m_deleteLineAct = new QAction(tr("Delete Line"),this);
    actionContext->regAction(m_deleteLineAct,"DeleteLine","Ctrl+Shift+K");
    connect(m_deleteLineAct,SIGNAL(triggered()),m_editorWidget,SLOT(deleteLine()));

    m_copyLineAct = new QAction(tr("Copy Line"),this);
    actionContext->regAction(m_copyLineAct,"CopyLine","Ctrl+Ins");
    connect(m_copyLineAct,SIGNAL(triggered()),m_editorWidget,SLOT(copyLine()));

    m_cutLineAct = new QAction(tr("Cut Line"),this);
    actionContext->regAction(m_cutLineAct,"CutLine","Shift+Del");
    connect(m_cutLineAct,SIGNAL(triggered()),m_editorWidget,SLOT(cutLine()));

    m_insertLineBeforeAct = new QAction(tr("Insert Line Before"),this);
    actionContext->regAction(m_insertLineBeforeAct,"InsertLineBefore","Ctrl+Shift+Return");
    connect(m_insertLineBeforeAct,SIGNAL(triggered()),m_editorWidget,SLOT(insertLineBefore()));

    m_insertLineAfterAct = new QAction(tr("Insert Line After"),this);
    actionContext->regAction(m_insertLineAfterAct,"InsertLineAfter","Ctrl+Return");
    connect(m_insertLineAfterAct,SIGNAL(triggered()),m_editorWidget,SLOT(insertLineAfter()));

    m_increaseFontSizeAct = new QAction(tr("Increase Font Size"),this);
    actionContext->regAction(m_increaseFontSizeAct,"IncreaseFontSize","Ctrl++");

    m_decreaseFontSizeAct = new QAction(tr("Decrease Font Size"),this);
    actionContext->regAction(m_decreaseFontSizeAct,"DecreaseFontSize","Ctrl+-");

    m_resetFontSizeAct = new QAction(tr("Reset Font Size"),this);
    actionContext->regAction(m_resetFontSizeAct,"ResetFontSize","Ctrl+0");

    m_cleanWhitespaceAct = new QAction(tr("Clean Whitespace"),this);
    actionContext->regAction(m_cleanWhitespaceAct,"CleanWhitespace","");

    m_wordWrapAct = new QAction(tr("Word Wrap (MimeType)"),this);
    m_wordWrapAct->setCheckable(true);
    actionContext->regAction(m_wordWrapAct,"WordWrap","");

    m_codeCompleteAct = new QAction(tr("Code Complete"),this);
#ifdef Q_OS_MAC
    actionContext->regAction(m_codeCompleteAct,"CodeComplete","Meta+Space");
#else
    actionContext->regAction(m_codeCompleteAct,"CodeComplete","Ctrl+Space");
#endif

    m_commentAct = new QAction(tr("Toggle Comment"),this);
    actionContext->regAction(m_commentAct,"Comment","Ctrl+/");

    m_blockCommentAct = new QAction(tr("Toggle Block Commnet"),this);
    actionContext->regAction(m_blockCommentAct,"BlockComment","Ctrl+Shift+/");

    m_autoIndentAct = new QAction(tr("Auto-indent Selection"),this);
    actionContext->regAction(m_autoIndentAct,"AutoIndent","Ctrl+I");
    m_autoIndentAct->setVisible(false);

    m_tabToSpacesAct = new QAction(tr("Tab To Spaces (MimeType)"),this);
    actionContext->regAction(m_tabToSpacesAct,"TabToSpaces","");
    m_tabToSpacesAct->setCheckable(true);

    m_lineEndingWindowAct = new QAction(tr("Line End Windows (\\r\\n)"),this);
    actionContext->regAction(m_lineEndingWindowAct,"LineEndingWindow","");
    m_lineEndingWindowAct->setCheckable(true);

    m_lineEndingUnixAct = new QAction(tr("Line End Unix (\\n)"),this);
    actionContext->regAction(m_lineEndingUnixAct,"LineEndingUnix","");
    m_lineEndingUnixAct->setCheckable(true);

    m_visualizeWhitespaceAct = new QAction(tr("Visualize Whitespace (Global)"),this);
    actionContext->regAction(m_visualizeWhitespaceAct,"VisualizeWhitespace","");
    m_visualizeWhitespaceAct->setCheckable(true);

    m_commentAct->setVisible(false);
    m_blockCommentAct->setVisible(false);

    m_moveLineUpAction = new QAction(tr("Move Line Up"),this);
    actionContext->regAction(m_moveLineUpAction,"MoveLineUp","Ctrl+Shift+Up");

    m_moveLineDownAction = new QAction(tr("Move Line Down"),this);
    actionContext->regAction(m_moveLineDownAction,"MoveLineDown","Ctrl+Shift+Down");

    m_copyLineUpAction = new QAction(tr("Copy Line Up"),this);
    actionContext->regAction(m_copyLineUpAction,"CopyLineUp","Ctrl+Alt+Up");

    m_copyLineDownAction = new QAction(tr("Copy Line Down"),this);
    actionContext->regAction(m_copyLineDownAction,"CopyLineDown","Ctrl+Alt+Down");

    m_joinLinesAction = new QAction(tr("Join Lines"),this);
    actionContext->regAction(m_joinLinesAction,"JoinLines","Ctrl+J");

    connect(m_codeCompleteAct,SIGNAL(triggered()),m_editorWidget,SLOT(codeCompleter()));
//    m_widget->addAction(m_foldAct);
//    m_widget->addAction(m_unfoldAct);
//    m_widget->addAction(m_gotoLineAct);

//    m_widget->addAction(m_gotoPrevBlockAct);
//    m_widget->addAction(m_gotoNextBlockAct);
//    m_widget->addAction(m_selectBlockAct);
//    m_widget->addAction(m_gotoMatchBraceAct);

    connect(m_editorWidget,SIGNAL(undoAvailable(bool)),m_undoAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(redoAvailable(bool)),m_redoAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(copyAvailable(bool)),m_cutAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(copyAvailable(bool)),m_copyAct,SLOT(setEnabled(bool)));
    connect(m_editorWidget,SIGNAL(wordWrapChanged(bool)),m_wordWrapAct,SLOT(setChecked(bool)));

    connect(m_undoAct,SIGNAL(triggered()),m_editorWidget,SLOT(undo()));
    connect(m_redoAct,SIGNAL(triggered()),m_editorWidget,SLOT(redo()));
    connect(m_cutAct,SIGNAL(triggered()),m_editorWidget,SLOT(cut()));
    connect(m_copyAct,SIGNAL(triggered()),m_editorWidget,SLOT(copy()));
    connect(m_pasteAct,SIGNAL(triggered()),m_editorWidget,SLOT(paste()));
    connect(m_selectAllAct,SIGNAL(triggered()),m_editorWidget,SLOT(selectAll()));
    connect(m_selectBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(selectBlock()));

    connect(m_exportHtmlAct,SIGNAL(triggered()),this,SLOT(exportHtml()));
#ifndef QT_NO_PRINTER
    connect(m_exportPdfAct,SIGNAL(triggered()),this,SLOT(exportPdf()));
    connect(m_filePrintAct,SIGNAL(triggered()),this,SLOT(filePrint()));
    connect(m_filePrintPreviewAct,SIGNAL(triggered()),this,SLOT(filePrintPreview()));
#endif
    connect(m_gotoPrevBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoPrevBlock()));
    connect(m_gotoNextBlockAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoNextBlock()));
    connect(m_gotoMatchBraceAct,SIGNAL(triggered()),m_editorWidget,SLOT(gotoMatchBrace()));
    connect(m_gotoLineAct,SIGNAL(triggered()),this,SLOT(gotoLine()));
    connect(m_increaseFontSizeAct,SIGNAL(triggered()),this,SLOT(increaseFontSize()));
    connect(m_decreaseFontSizeAct,SIGNAL(triggered()),this,SLOT(decreaseFontSize()));
    connect(m_resetFontSizeAct,SIGNAL(triggered()),this,SLOT(resetFontSize()));
    connect(m_cleanWhitespaceAct,SIGNAL(triggered()),m_editorWidget,SLOT(cleanWhitespace()));
    connect(m_wordWrapAct,SIGNAL(triggered(bool)),m_editorWidget,SLOT(setWordWrapOverride(bool)));
    connect(m_commentAct,SIGNAL(triggered()),this,SLOT(comment()));
    connect(m_blockCommentAct,SIGNAL(triggered()),this,SLOT(blockComment()));
    connect(m_autoIndentAct,SIGNAL(triggered()),this,SLOT(autoIndent()));
    connect(m_tabToSpacesAct,SIGNAL(toggled(bool)),this,SLOT(tabToSpacesToggled(bool)));
    connect(m_visualizeWhitespaceAct,SIGNAL(toggled(bool)),this,SLOT(toggledVisualizeWhitespace(bool)));
    connect(m_moveLineUpAction,SIGNAL(triggered()),m_editorWidget,SLOT(moveLineUp()));
    connect(m_moveLineDownAction,SIGNAL(triggered()),m_editorWidget,SLOT(moveLineDown()));
    connect(m_copyLineUpAction,SIGNAL(triggered()),m_editorWidget,SLOT(copyLineUp()));
    connect(m_copyLineDownAction,SIGNAL(triggered()),m_editorWidget,SLOT(copyLineDown()));
    connect(m_joinLinesAction,SIGNAL(triggered()),m_editorWidget,SLOT(joinLines()));
    //connect(m_lineEndingWindowAct,SIGNAL(triggered()),this,SLOT(lineEndingWindow()));
    //connect(m_lineEndingUnixAct,SIGNAL(triggered()),this,SLOT(lineEndingUnixAct()));
    QActionGroup *group = new QActionGroup(this);
    group->addAction(m_lineEndingWindowAct);
    group->addAction(m_lineEndingUnixAct);
    connect(group,SIGNAL(triggered(QAction*)),this,SLOT(triggeredLineEnding(QAction*)));

#ifdef Q_OS_WIN
    QClipboard *clipboard = QApplication::clipboard();
    connect(clipboard,SIGNAL(dataChanged()),this,SLOT(clipbordDataChanged()));
    clipbordDataChanged();
#endif
}
/*
 *  Constructs a TestWindow as a child of 'parent', with the
 *  name 'name' and widget flags set to 'f'.
 *
 */
TestWindow::TestWindow( QWidget* parent, const char* name, WFlags fl )
    : QMainWindow( parent, name, fl )
{
    (void)statusBar();
    QImage img;
    img.loadFromData( image0_data, sizeof( image0_data ), "PNG" );
    image0 = img;
    img.loadFromData( image1_data, sizeof( image1_data ), "PNG" );
    image1 = img;
    img.loadFromData( image2_data, sizeof( image2_data ), "PNG" );
    image2 = img;
    img.loadFromData( image3_data, sizeof( image3_data ), "PNG" );
    image3 = img;
    img.loadFromData( image4_data, sizeof( image4_data ), "PNG" );
    image4 = img;
    img.loadFromData( image5_data, sizeof( image5_data ), "PNG" );
    image5 = img;
    img.loadFromData( image6_data, sizeof( image6_data ), "PNG" );
    image6 = img;
    img.loadFromData( image7_data, sizeof( image7_data ), "PNG" );
    image7 = img;
    img.loadFromData( image8_data, sizeof( image8_data ), "PNG" );
    image8 = img;
    img.loadFromData( image9_data, sizeof( image9_data ), "PNG" );
    image9 = img;
    if ( !name )
	setName( "TestWindow" );
    setCentralWidget( new QWidget( this, "qt_central_widget" ) );
    TestWindowLayout = new QVBoxLayout( centralWidget(), 11, 6, "TestWindowLayout"); 

    mainPanel = new QGroupBox( centralWidget(), "mainPanel" );
    mainPanel->setPaletteForegroundColor( QColor( 255, 255, 255 ) );
    mainPanel->setPaletteBackgroundColor( QColor( 0, 0, 0 ) );
    mainPanel->setFrameShadow( QGroupBox::Sunken );
    mainPanel->setFlat( FALSE );

    grpbuffer = new QGroupBox( mainPanel, "grpbuffer" );
    grpbuffer->setGeometry( QRect( 10, 20, 320, 60 ) );
    grpbuffer->setPaletteForegroundColor( QColor( 255, 255, 255 ) );
    grpbuffer->setFlat( FALSE );
    TestWindowLayout->addWidget( mainPanel );

    layout1 = new QHBoxLayout( 0, 0, 6, "layout1"); 

    btnStart = new QPushButton( centralWidget(), "btnStart" );
    layout1->addWidget( btnStart );

    btnStop = new QPushButton( centralWidget(), "btnStop" );
    layout1->addWidget( btnStop );
    TestWindowLayout->addLayout( layout1 );

    // actions
    fileNewAction = new QAction( this, "fileNewAction" );
    fileNewAction->setIconSet( QIconSet( image0 ) );
    fileOpenAction = new QAction( this, "fileOpenAction" );
    fileOpenAction->setIconSet( QIconSet( image1 ) );
    fileSaveAction = new QAction( this, "fileSaveAction" );
    fileSaveAction->setIconSet( QIconSet( image2 ) );
    fileSaveAsAction = new QAction( this, "fileSaveAsAction" );
    filePrintAction = new QAction( this, "filePrintAction" );
    filePrintAction->setIconSet( QIconSet( image3 ) );
    fileExitAction = new QAction( this, "fileExitAction" );
    editUndoAction = new QAction( this, "editUndoAction" );
    editUndoAction->setIconSet( QIconSet( image4 ) );
    editRedoAction = new QAction( this, "editRedoAction" );
    editRedoAction->setIconSet( QIconSet( image5 ) );
    editCutAction = new QAction( this, "editCutAction" );
    editCutAction->setIconSet( QIconSet( image6 ) );
    editCopyAction = new QAction( this, "editCopyAction" );
    editCopyAction->setIconSet( QIconSet( image7 ) );
    editPasteAction = new QAction( this, "editPasteAction" );
    editPasteAction->setIconSet( QIconSet( image8 ) );
    editFindAction = new QAction( this, "editFindAction" );
    editFindAction->setIconSet( QIconSet( image9 ) );
    helpContentsAction = new QAction( this, "helpContentsAction" );
    helpIndexAction = new QAction( this, "helpIndexAction" );
    helpAboutAction = new QAction( this, "helpAboutAction" );


    // toolbars


    // menubar
    menubar = new QMenuBar( this, "menubar" );

    menubar->setEnabled( FALSE );
    menubar->setPaletteBackgroundColor( QColor( 239, 239, 239 ) );

    fileMenu = new QPopupMenu( this );
    fileNewAction->addTo( fileMenu );
    fileOpenAction->addTo( fileMenu );
    fileSaveAction->addTo( fileMenu );
    fileSaveAsAction->addTo( fileMenu );
    fileMenu->insertSeparator();
    filePrintAction->addTo( fileMenu );
    fileMenu->insertSeparator();
    fileExitAction->addTo( fileMenu );
    menubar->insertItem( QString(""), fileMenu, 3 );

    editMenu = new QPopupMenu( this );
    editUndoAction->addTo( editMenu );
    editRedoAction->addTo( editMenu );
    editMenu->insertSeparator();
    editCutAction->addTo( editMenu );
    editCopyAction->addTo( editMenu );
    editPasteAction->addTo( editMenu );
    editMenu->insertSeparator();
    editFindAction->addTo( editMenu );
    menubar->insertItem( QString(""), editMenu, 4 );

    Help = new QPopupMenu( this );
    helpContentsAction->addTo( Help );
    helpIndexAction->addTo( Help );
    Help->insertSeparator();
    helpAboutAction->addTo( Help );
    menubar->insertItem( QString(""), Help, 5 );

    languageChange();
    resize( QSize(373, 363).expandedTo(minimumSizeHint()) );
    clearWState( WState_Polished );

    // signals and slots connections
    connect( fileNewAction, SIGNAL( activated() ), this, SLOT( fileNew() ) );
    connect( fileOpenAction, SIGNAL( activated() ), this, SLOT( fileOpen() ) );
    connect( fileSaveAction, SIGNAL( activated() ), this, SLOT( fileSave() ) );
    connect( fileSaveAsAction, SIGNAL( activated() ), this, SLOT( fileSaveAs() ) );
    connect( filePrintAction, SIGNAL( activated() ), this, SLOT( filePrint() ) );
    connect( fileExitAction, SIGNAL( activated() ), this, SLOT( fileExit() ) );
    connect( editUndoAction, SIGNAL( activated() ), this, SLOT( editUndo() ) );
    connect( editRedoAction, SIGNAL( activated() ), this, SLOT( editRedo() ) );
    connect( editCutAction, SIGNAL( activated() ), this, SLOT( editCut() ) );
    connect( editCopyAction, SIGNAL( activated() ), this, SLOT( editFind() ) );
    connect( editPasteAction, SIGNAL( activated() ), this, SLOT( editPaste() ) );
    connect( editFindAction, SIGNAL( activated() ), this, SLOT( editFind() ) );
    connect( helpIndexAction, SIGNAL( activated() ), this, SLOT( helpIndex() ) );
    connect( helpContentsAction, SIGNAL( activated() ), this, SLOT( helpContents() ) );
    connect( helpAboutAction, SIGNAL( activated() ), this, SLOT( helpAbout() ) );
    connect( btnStart, SIGNAL( released() ), this, SLOT( add() ) );
    connect( btnStop, SIGNAL( released() ), this, SLOT( remove() ) );
}
Example #29
0
void DevGUI::setupFileActions()
{
    QToolBar *tb = new QToolBar(this);
    tb->setWindowTitle(tr("File Actions"));
    addToolBar(tb);

    QMenu *menu = new QMenu(tr("&File"), this);
    menuBar()->addMenu(menu);

    QAction *a;

    a = new QAction(QIcon(":/new.png"), tr("&New..."), this);
    a->setShortcut(Qt::CTRL + Qt::Key_N);
    connect(a, SIGNAL(triggered()), this, SLOT(fileNew()));
    tb->addAction(a);
    menu->addAction(a);

    a = new QAction(QIcon(":/open.png"), tr("&Open..."), this);
    a->setShortcut(Qt::CTRL + Qt::Key_O);
    connect(a, SIGNAL(triggered()), this, SLOT(fileOpen()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    actionSave = a = new QAction(QIcon(":/save.png"), tr("&Save"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_S);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSave()));
    a->setEnabled(false);
    tb->addAction(a);
    menu->addAction(a);
    
    a = new QAction(QIcon(":/save.png"), tr("Save &As..."), this);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAs()));
    a->setEnabled(false);
    menu->addAction(a);

    menu->addSeparator();

    actionSaveAll = a = new QAction(QIcon(":/saveall.png"), tr("&Save All"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_A);
    connect(a, SIGNAL(triggered()), this, SLOT(fileSaveAll()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    a = new QAction(QIcon(":/print.png"), tr("&Print..."), this);
    a->setShortcut(Qt::CTRL + Qt::Key_P);
    connect(a, SIGNAL(triggered()), this, SLOT(filePrint()));
    tb->addAction(a);
    menu->addAction(a);

    actionClose = a = new QAction(QIcon(":/close.png"), tr("&Close"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_W);
	a->setEnabled(false);
    connect(a, SIGNAL(triggered()), this, SLOT(fileClose()));
    tb->addAction(a);
    menu->addAction(a);

    menu->addSeparator();

    a = new QAction(QIcon(":/exit.png"), tr("E&xit"), this);
    a->setShortcut(Qt::CTRL + Qt::Key_Q);
    connect( a, SIGNAL(triggered()), qApp, SLOT( quit() ) );
    menu->addAction(a);
}
/*
 *  Constructs a MainWindow as a child of 'parent', with the
 *  name 'name' and widget flags set to 'f'.
 *
 */
MainWindow::MainWindow( QWidget* parent, const char* name, WFlags fl )
    : QMainWindow( parent, name, fl )
{
    (void)statusBar();
    QImage img;
    img.loadFromData( image0_data, sizeof( image0_data ), "PNG" );
    image0 = img;
    img.loadFromData( image1_data, sizeof( image1_data ), "PNG" );
    image1 = img;
    img.loadFromData( image2_data, sizeof( image2_data ), "PNG" );
    image2 = img;
    img.loadFromData( image3_data, sizeof( image3_data ), "PNG" );
    image3 = img;
    img.loadFromData( image4_data, sizeof( image4_data ), "PNG" );
    image4 = img;
    img.loadFromData( image5_data, sizeof( image5_data ), "PNG" );
    image5 = img;
    img.loadFromData( image6_data, sizeof( image6_data ), "PNG" );
    image6 = img;
    img.loadFromData( image7_data, sizeof( image7_data ), "PNG" );
    image7 = img;
    img.loadFromData( image8_data, sizeof( image8_data ), "PNG" );
    image8 = img;
    img.loadFromData( image9_data, sizeof( image9_data ), "PNG" );
    image9 = img;
    if ( !name )
	setName( "MainWindow" );
    setCentralWidget( new QWidget( this, "qt_central_widget" ) );

    QWidget* privateLayoutWidget = new QWidget( centralWidget(), "layout8" );
    privateLayoutWidget->setGeometry( QRect( 1, 11, 340, 300 ) );
    layout8 = new QVBoxLayout( privateLayoutWidget, 11, 6, "layout8"); 

    BotonesLector = new QButtonGroup( privateLayoutWidget, "BotonesLector" );
    BotonesLector->setColumnLayout(0, Qt::Vertical );
    BotonesLector->layout()->setSpacing( 6 );
    BotonesLector->layout()->setMargin( 11 );
    BotonesLectorLayout = new QHBoxLayout( BotonesLector->layout() );
    BotonesLectorLayout->setAlignment( Qt::AlignTop );

    layout9 = new QHBoxLayout( 0, 0, 6, "layout9"); 

    pushButton1 = new QPushButton( BotonesLector, "pushButton1" );
    layout9->addWidget( pushButton1 );

    pushButton2 = new QPushButton( BotonesLector, "pushButton2" );
    layout9->addWidget( pushButton2 );
    BotonesLectorLayout->addLayout( layout9 );
    layout8->addWidget( BotonesLector );

    layout6 = new QHBoxLayout( 0, 0, 6, "layout6"); 

    layout5 = new QVBoxLayout( 0, 0, 6, "layout5"); 

    txtSldrTitleTemp = new QLabel( privateLayoutWidget, "txtSldrTitleTemp" );
    txtSldrTitleTemp->setFrameShape( QLabel::Box );
    txtSldrTitleTemp->setScaledContents( FALSE );
    layout5->addWidget( txtSldrTitleTemp );

    sldrTemp = new QSlider( privateLayoutWidget, "sldrTemp" );
    sldrTemp->setMaxValue( 4 );
    sldrTemp->setOrientation( QSlider::Vertical );
    layout5->addWidget( sldrTemp );

    txtTemp = new QLabel( privateLayoutWidget, "txtTemp" );
    QFont txtTemp_font(  txtTemp->font() );
    txtTemp_font.setPointSize( 8 );
    txtTemp->setFont( txtTemp_font ); 
    layout5->addWidget( txtTemp );
    layout6->addLayout( layout5 );

    Grupo1 = new QGroupBox( privateLayoutWidget, "Grupo1" );
    layout6->addWidget( Grupo1 );

    layout4 = new QVBoxLayout( 0, 0, 6, "layout4"); 

    txtSldrTitleVelocidad = new QLabel( privateLayoutWidget, "txtSldrTitleVelocidad" );
    txtSldrTitleVelocidad->setFrameShape( QLabel::Box );
    txtSldrTitleVelocidad->setScaledContents( FALSE );
    layout4->addWidget( txtSldrTitleVelocidad );

    sldrVelocidad = new QSlider( privateLayoutWidget, "sldrVelocidad" );
    sldrVelocidad->setOrientation( QSlider::Vertical );
    layout4->addWidget( sldrVelocidad );

    txtVelocidad = new QLabel( privateLayoutWidget, "txtVelocidad" );
    QFont txtVelocidad_font(  txtVelocidad->font() );
    txtVelocidad_font.setPointSize( 8 );
    txtVelocidad->setFont( txtVelocidad_font ); 
    layout4->addWidget( txtVelocidad );
    layout6->addLayout( layout4 );
    layout8->addLayout( layout6 );

    BotonActivar = new QButtonGroup( privateLayoutWidget, "BotonActivar" );
    BotonActivar->setColumnLayout(0, Qt::Vertical );
    BotonActivar->layout()->setSpacing( 6 );
    BotonActivar->layout()->setMargin( 11 );
    BotonActivarLayout = new QHBoxLayout( BotonActivar->layout() );
    BotonActivarLayout->setAlignment( Qt::AlignTop );

    btnIniciar = new QPushButton( BotonActivar, "btnIniciar" );
    btnIniciar->setToggleButton( TRUE );
    BotonActivarLayout->addWidget( btnIniciar );
    layout8->addWidget( BotonActivar );

    // actions
    fileNewAction = new QAction( this, "fileNewAction" );
    fileNewAction->setIconSet( QIconSet( image0 ) );
    fileOpenAction = new QAction( this, "fileOpenAction" );
    fileOpenAction->setIconSet( QIconSet( image1 ) );
    fileSaveAction = new QAction( this, "fileSaveAction" );
    fileSaveAction->setIconSet( QIconSet( image2 ) );
    fileSaveAsAction = new QAction( this, "fileSaveAsAction" );
    filePrintAction = new QAction( this, "filePrintAction" );
    filePrintAction->setIconSet( QIconSet( image3 ) );
    fileExitAction = new QAction( this, "fileExitAction" );
    editUndoAction = new QAction( this, "editUndoAction" );
    editUndoAction->setIconSet( QIconSet( image4 ) );
    editRedoAction = new QAction( this, "editRedoAction" );
    editRedoAction->setIconSet( QIconSet( image5 ) );
    editCutAction = new QAction( this, "editCutAction" );
    editCutAction->setIconSet( QIconSet( image6 ) );
    editCopyAction = new QAction( this, "editCopyAction" );
    editCopyAction->setIconSet( QIconSet( image7 ) );
    editPasteAction = new QAction( this, "editPasteAction" );
    editPasteAction->setIconSet( QIconSet( image8 ) );
    editFindAction = new QAction( this, "editFindAction" );
    editFindAction->setIconSet( QIconSet( image9 ) );
    helpContentsAction = new QAction( this, "helpContentsAction" );
    helpIndexAction = new QAction( this, "helpIndexAction" );
    helpAboutAction = new QAction( this, "helpAboutAction" );


    // toolbars


    // menubar
    menubar = new QMenuBar( this, "menubar" );


    fileMenu = new QPopupMenu( this );
    fileOpenAction->addTo( fileMenu );
    fileSaveAction->addTo( fileMenu );
    fileMenu->insertSeparator();
    fileMenu->insertSeparator();
    fileExitAction->addTo( fileMenu );
    menubar->insertItem( QString(""), fileMenu, 1 );

    helpMenu = new QPopupMenu( this );
    helpMenu->insertSeparator();
    helpAboutAction->addTo( helpMenu );
    menubar->insertItem( QString(""), helpMenu, 2 );

    languageChange();
    resize( QSize(351, 352).expandedTo(minimumSizeHint()) );
    clearWState( WState_Polished );

    // signals and slots connections
    connect( fileNewAction, SIGNAL( activated() ), this, SLOT( fileNew() ) );
    connect( fileOpenAction, SIGNAL( activated() ), this, SLOT( fileOpen() ) );
    connect( fileSaveAction, SIGNAL( activated() ), this, SLOT( fileSave() ) );
    connect( fileSaveAsAction, SIGNAL( activated() ), this, SLOT( fileSaveAs() ) );
    connect( filePrintAction, SIGNAL( activated() ), this, SLOT( filePrint() ) );
    connect( fileExitAction, SIGNAL( activated() ), this, SLOT( fileExit() ) );
    connect( editUndoAction, SIGNAL( activated() ), this, SLOT( editUndo() ) );
    connect( editRedoAction, SIGNAL( activated() ), this, SLOT( editRedo() ) );
    connect( editCutAction, SIGNAL( activated() ), this, SLOT( editCut() ) );
    connect( editCopyAction, SIGNAL( activated() ), this, SLOT( editCopy() ) );
    connect( editPasteAction, SIGNAL( activated() ), this, SLOT( editPaste() ) );
    connect( editFindAction, SIGNAL( activated() ), this, SLOT( editFind() ) );
    connect( helpIndexAction, SIGNAL( activated() ), this, SLOT( helpIndex() ) );
    connect( helpContentsAction, SIGNAL( activated() ), this, SLOT( helpContents() ) );
    connect( helpAboutAction, SIGNAL( activated() ), this, SLOT( helpAbout() ) );
    connect( sldrTemp, SIGNAL( valueChanged(int) ), txtTemp, SLOT( setNum(int) ) );
    connect( sldrVelocidad, SIGNAL( valueChanged(int) ), txtVelocidad, SLOT( setNum(int) ) );
    connect( BotonActivar, SIGNAL( toggled(bool) ), this, SLOT( Activar(bool) ) );
}