static void prvSetupHardware( void )
{
taskDISABLE_INTERRUPTS();
/* Disable the watchdog. */
WDTCTL = WDTPW + WDTHOLD;
halBoardInit();
LFXT_Start( XT1DRIVE_0 );
hal430SetSystemClock( configCPU_CLOCK_HZ, configLFXT_CLOCK_HZ );
hal430SetSubSystemMasterClock( );
halButtonsInit( BUTTON_ALL );
halButtonsInterruptEnable( BUTTON_SELECT );
/* Initialise the LCD, but note that the backlight is not used as the
library function uses timer A0 to modulate the backlight, and this file
defines vApplicationSetupTimerInterrupt() to also use timer A0 to generate
the tick interrupt. If the backlight is required, then change either the
halLCD library or vApplicationSetupTimerInterrupt() to use a different
timer. Timer A1 is used for the run time stats time base6. */
halLcdInit();
halLcdSetContrast( 100 );
halLcdClearScreen();
halLcdPrintLine( " www.FreeRTOS.org", 0, OVERWRITE_TEXT );
}
void main( void )
{
unsigned int ucState=0xffff;
unsigned char test[10];
memset(test,'\0',10);
int i=0;
halBoardInit();
hal430SetSystemClock();
halButtonsInit();
Init_Uart(115200);
Init_Lcd();
Msp430_ADC12_Init();
Write_NByte((unsigned char *)eeprom,10,0);
Read_NByte_Randomaddress(test,10,0);
printf("main %s\r\n",test);
while(1)
{
if(flag==1)
{
//WDTCTL = WDTPW + WDTNMI + WDTTMSEL + WDTSSEL + WDTCNTCL; // Start watchdog timer
//IE1 |= WDTIE; // Enable WDT interrupt
printf("we are in active state\r\n");
//这里写自己的程序，把程序做在一个有限的循环里，这样做完之后就可以自动结束并关机。
for(i=0;i<1000;i++){
ucState = halButtonsPressed();
if(ucState!=0xffff)
{
i=0;
send_wave();
hal_buzzer(2);
Get_Power();
//printf("%x is pressed\r\n",ucState);
switch(ucState)
{
case BUTTON_MATL:
printf("matl is pressed\r\n");
break;
case BUTTON_HARD:
printf("hard is pressed\r\n");
break;
case BUTTON_DIREC:
printf("direc is pressed\r\n");
break;
case BUTTON_TIMES:
printf("times is pressed\r\n");
break;
case BUTTON_SAVE:
printf("save is pressed\r\n");
break;
case BUTTON_UP:
printf("up is pressed\r\n");
break;
case BUTTON_DEL:
printf("del is pressed\r\n");
break;
case BUTTON_AVE:
printf("ave is pressed\r\n");
break;
case BUTTON_LEFT:
printf("left is pressed\r\n");
break;
case BUTTON_MENU:
printf("menu is pressed\r\n");
break;
case BUTTON_RIGHT:
printf("right is pressed\r\n");
break;
case BUTTON_BACKLIGHT:
printf("backlight is pressed\r\n");
break;
case BUTTON_ESC:
printf("esc is pressed\r\n");
break;
case BUTTON_DOWN:
printf("down is pressed\r\n");
break;
case BUTTON_ENTER:
printf("enter is pressed\r\n");
break;
default:
break;
}
}
//LPM3;
Delay(100);
}
//如需定时，上边这个LPM3要被包括在那个有循环的循环体中，这样才能实现类似便携式仪表5分钟自动关机的效果。如果不使用定时也可以不要LPM3这句话。
//WDTCTL = WDTPW + WDTHOLD + WDTNMI; // Stop watchdog timer
flag=0;
}
else
{
//如果周边设备在关机时有需要复位的或是关闭的在这里处理
printf("we are in power off state\r\n");
}
hal_buzzer(0);
printf("we going to LPM4\r\n");
LPM4;
}
}