Example #1
0
void LayerModel::setVisible(bool v, int id)
{
    m_layers.at(id)->visible = v;
    feather::qml::command::set_layer_visible(v,id);
    layoutChanged();
}
void MediaRoutingView::MessageReceived(
	BMessage* message)
{
	D_METHOD(("MediaRoutingView::MessageReceived()\n"));

	switch (message->what)
	{
		case B_MEDIA_NODE_CREATED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(B_MEDIA_NODE_CREATED)\n"));
			type_code type;
			int32 count;
			if (message->GetInfo("media_node_id", &type, &count) == B_OK)
			{
				for(int32 n = 0; n < count; n++) 
				{
					int32 id;
					if (message->FindInt32("media_node_id", n, &id) == B_OK)
					{
						// [e.moon 8dec99] allow for existing panel
						MediaNodePanel* panel;
						if(_findPanelFor(id, &panel) < B_OK)
							_addPanelFor(id, BPoint(5.0, 5.0));
					}
				}
			}
			break;
		}
		case B_MEDIA_NODE_DELETED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(B_MEDIA_NODE_DELETED)\n"));
			type_code type;
			int32 count;
			if (message->GetInfo("media_node_id", &type, &count) == B_OK)
			{
				for (int32 n = 0; n < count; n++) 
				{
					int32 id;
					if (message->FindInt32("media_node_id", n, &id) == B_OK)
					{
						_removePanelFor(id);
					}
				}
			}			
			break;
		}
		case B_MEDIA_CONNECTION_MADE:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(B_MEDIA_CONNECTION_MADE)\n"));
			type_code type;
			int32 count;
			if (message->GetInfo("output", &type, &count) == B_OK)
			{
				for (int32 n = 0; n < count; n++)
				{
					media_output output;
					const void *data;
					ssize_t dataSize;
					if (message->FindData("output", B_RAW_TYPE, n, &data, &dataSize) == B_OK)
					{
						output = *reinterpret_cast<const media_output *>(data);
						Connection connection;
						if (manager->findConnection(output.node.node, output.source, &connection) == B_OK)
						{
							_addWireFor(connection);
						}
					}
				}
			}
			break;
		}
		case B_MEDIA_CONNECTION_BROKEN:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(B_MEDIA_CONNECTION_BROKEN)\n"));
			type_code type;
			int32 count;
			if (message->GetInfo("__connection_id", &type, &count) == B_OK)
			{
				for (int32 n = 0; n < count; n++)
				{
					int32 id;
					if (message->FindInt32("__connection_id", n, &id) == B_OK)
					{
						_removeWireFor(id);
					}	
				}
			}
			break;
		}
		case B_MEDIA_FORMAT_CHANGED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(B_MEDIA_FORMAT_CHANGED)\n"));
			
			media_node_id nodeID;
			if(message->FindInt32("__source_node_id", &nodeID) < B_OK)
				break;

			uint32 connectionID;
			if(message->FindInt32("__connection_id", (int32*)&connectionID) < B_OK)
				break;

			media_source* source;
			ssize_t dataSize;
			if(message->FindData("be:source", B_RAW_TYPE, (const void**)&source, &dataSize) < B_OK)
				break;
				
			MediaWire* wire;
			if(_findWireFor(connectionID, &wire) == B_OK) {
				// copy new connection data
				manager->findConnection(nodeID, *source, &wire->connection);
			}
			break;
		}
		case M_CLEANUP_REQUESTED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_M_CLEANUP_REQUESTED)\n"));
			cleanUp();
			break;
		}
		case M_SELECT_ALL:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_SELECT_ALL)\n"));
			selectAll(DiagramItem::M_BOX);
			break;
		}
		case M_DELETE_SELECTION:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_DELETE_SELECTION)\n"));
			_deleteSelection();
			break;
		}
		case M_NODE_CHANGE_CYCLING:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_NODE_CYCLING_CHANGED)\n"));
			bool cycle;
			if (message->FindBool("cycle", &cycle) == B_OK)
			{
				_changeCyclingForSelection(cycle);
			}
			break;
		}
		case M_NODE_CHANGE_RUN_MODE:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_NODE_RUNMODE_CHANGED)\n"));
			int32 mode;
			if (message->FindInt32("run_mode", &mode) == B_OK)
			{
				_changeRunModeForSelection(static_cast<uint32>(mode));
			}
			break;
		}
		case M_LAYOUT_CHANGED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_LAYOUT_CHANGED)\n"));
			layout_t layout;
			if (message->FindInt32("layout", (int32*)&layout) == B_OK)
			{
				if (layout != m_layout)
				{
					layoutChanged(layout);
					updateDataRect();
					Invalidate();
				}
			}
			break;
		}
		case M_NODE_START_TIME_SOURCE:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_NODE_START_TIME_SOURCE)\n"));
			int32 id;
			if(message->FindInt32("nodeID", &id) < B_OK)
				break;
			NodeRef* ref;
			if(manager->getNodeRef(id, &ref) < B_OK)
				break;
			
			bigtime_t when = system_time();
			status_t err = manager->roster->StartTimeSource(ref->node(), when);
			if(err < B_OK) {
				PRINT((
					"! StartTimeSource(%ld): '%s'\n",
					ref->id(), strerror(err)));
			}
			break;
		}
		case M_NODE_STOP_TIME_SOURCE:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_NODE_STOP_TIME_SOURCE)\n"));
			int32 id;
			if(message->FindInt32("nodeID", &id) < B_OK)
				break;
			NodeRef* ref;
			if(manager->getNodeRef(id, &ref) < B_OK)
				break;
			
			bigtime_t when = system_time();
			status_t err = manager->roster->StopTimeSource(ref->node(), when);
			if(err < B_OK) {
				PRINT((
					"! StopTimeSource(%ld): '%s'\n",
					ref->id(), strerror(err)));
			}
			break;
		}
		case M_NODE_TWEAK_PARAMETERS: {
			D_MESSAGE((" -> M_NODE_TWEAK_PARAMETERS\n"));
			_openParameterWindowsForSelection();
			break;
		}
		case M_NODE_START_CONTROL_PANEL: {
			D_MESSAGE((" -> M_NODE_START_CONTROL_PANEL\n"));
			_startControlPanelsForSelection();
			break;
		}
		case M_GROUP_SET_LOCKED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(M_GROUP_SET_LOCKED)\n"));
			int32 groupID;
			if(message->FindInt32("groupID", &groupID) < B_OK)
				break;
			bool locked;
			if(message->FindBool("locked", &locked) < B_OK)
				break;
			NodeGroup* group;
			if(manager->findGroup(groupID, &group) < B_OK)
				break;
			uint32 f = locked ?
				group->groupFlags() | NodeGroup::GROUP_LOCKED :
				group->groupFlags() & ~NodeGroup::GROUP_LOCKED;
			group->setGroupFlags(f);
			break;
		}
		case M_BROADCAST_SELECTION: {
			D_MESSAGE((" -> M_BROADCAST_SELECTION\n"));
			_broadcastSelection();
			break;
		}
		case InfoWindowManager::M_INFO_WINDOW_REQUESTED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(InfoView::M_INFO_WINDOW_REQUESTED)\n"));
			type_code type;
			int32 count;
			if (message->GetInfo("input", &type, &count) == B_OK)
			{
				for (int32 i = 0; i < count; i++)
				{
					media_input input;
					const void *data;
					ssize_t dataSize;
					if (message->FindData("input", B_RAW_TYPE, i, &data, &dataSize) == B_OK)
					{
						input = *reinterpret_cast<const media_input *>(data);
						InfoWindowManager *manager = InfoWindowManager::Instance();
						if (manager && manager->Lock()) {
							manager->openWindowFor(input);
							manager->Unlock();
						}
					}
				}
			}
			else if (message->GetInfo("output", &type, &count) == B_OK)
			{
				for (int32 i = 0; i < count; i++)
				{
					media_output output;
					const void *data;
					ssize_t dataSize;
					if (message->FindData("output", B_RAW_TYPE, i, &data, &dataSize) == B_OK)
					{
						output = *reinterpret_cast<const media_output *>(data);
						InfoWindowManager *manager = InfoWindowManager::Instance();
						if (manager && manager->Lock()) {
							manager->openWindowFor(output);
							manager->Unlock();
						}
					}
				}
			}
			else
			{
				_openInfoWindowsForSelection();
			}
			break;
		}
		case NodeManager::M_RELEASED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(NodeManager::M_RELEASED)\n"));
			remove_observer(this, manager);
			const_cast<RouteAppNodeManager*&>(manager) = 0;	
			// +++++ disable view!
			break;
		}			
		case NodeRef::M_RELEASED:
		{
			D_MESSAGE(("MediaRoutingView::MessageReceived(NodeRef::M_RELEASED)\n"));
			// only relevant on shutdown; do nothing
			break;
		}
		default:
		{
			DiagramView::MessageReceived(message);
		}
	}
}
Example #3
0
void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel())
    {
        // Subscribe to information, replies, messages, errors
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        setMasternodeCount(model->getMasternodeCountString());
        connect(model, SIGNAL(strMasternodesChanged(QString)), this, SLOT(setMasternodeCount(QString)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);

        // create context menu actions
        QAction* disconnectAction = new QAction(tr("&Disconnect Node"), this);
        QAction* banAction1h      = new QAction(tr("Ban Node for") + " " + tr("1 &hour"), this);
        QAction* banAction24h     = new QAction(tr("Ban Node for") + " " + tr("1 &day"), this);
        QAction* banAction7d      = new QAction(tr("Ban Node for") + " " + tr("1 &week"), this);
        QAction* banAction365d    = new QAction(tr("Ban Node for") + " " + tr("1 &year"), this);

        // create peer table context menu
        peersTableContextMenu = new QMenu();
        peersTableContextMenu->addAction(disconnectAction);
        peersTableContextMenu->addAction(banAction1h);
        peersTableContextMenu->addAction(banAction24h);
        peersTableContextMenu->addAction(banAction7d);
        peersTableContextMenu->addAction(banAction365d);

        // Add a signal mapping to allow dynamic context menu arguments.
        // We need to use int (instead of int64_t), because signal mapper only supports
        // int or objects, which is okay because max bantime (1 year) is < int_max.
        QSignalMapper* signalMapper = new QSignalMapper(this);
        signalMapper->setMapping(banAction1h, 60*60);
        signalMapper->setMapping(banAction24h, 60*60*24);
        signalMapper->setMapping(banAction7d, 60*60*24*7);
        signalMapper->setMapping(banAction365d, 60*60*24*365);
        connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int)));

        // peer table context menu signals
        connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showPeersTableContextMenu(const QPoint&)));
        connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));

        // peer table signal handling - update peer details when selecting new node
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
            this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        // peer table signal handling - update peer details when new nodes are added to the model
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // set up ban table
        ui->banlistWidget->setModel(model->getBanTableModel());
        ui->banlistWidget->verticalHeader()->hide();
        ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH);
        ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH);
        ui->banlistWidget->horizontalHeader()->setStretchLastSection(true);

        // create ban table context menu action
        QAction* unbanAction = new QAction(tr("&Unban Node"), this);

        // create ban table context menu
        banTableContextMenu = new QMenu();
        banTableContextMenu->addAction(unbanAction);

        // ban table context menu signals
        connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showBanTableContextMenu(const QPoint&)));
        connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode()));

        // ban table signal handling - clear peer details when clicking a peer in the ban table
        connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex&)), this, SLOT(clearSelectedNode()));
        // ban table signal handling - ensure ban table is shown or hidden (if empty)
        connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired()));
        showOrHideBanTableIfRequired();

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());

        setNumConnections(model->getNumConnections());
        ui->isTestNet->setChecked(model->isTestNet());
    }
void
InstructionListModel::clear() {
    layoutAboutToBeChanged().emit();
    insns_.clear();
    layoutChanged().emit();
}
PointViewerMainWindow::PointViewerMainWindow(const QGLFormat& format)
    : m_progressBar(0),
    m_pointView(0),
    m_shaderEditor(0),
    m_helpDialog(0),
    m_logTextView(0),
    m_maxPointCount(200*1000*1000), // 200 million
    m_geometries(0),
    m_ipcServer(0),
    m_hookManager(0)
{
    setWindowTitle("Displaz");
    setAcceptDrops(true);

    m_helpDialog = new HelpDialog(this);

    m_geometries = new GeometryCollection(this);
    connect(m_geometries, SIGNAL(layoutChanged()), this, SLOT(updateTitle()));
    connect(m_geometries, SIGNAL(dataChanged(QModelIndex,QModelIndex)), this, SLOT(updateTitle()));
    connect(m_geometries, SIGNAL(rowsInserted(QModelIndex,int,int)),    this, SLOT(updateTitle()));
    connect(m_geometries, SIGNAL(rowsRemoved(QModelIndex,int,int)),     this, SLOT(updateTitle()));

    //--------------------------------------------------
    // Set up file loader in a separate thread
    //
    // Some subtleties regarding qt thread usage are discussed here:
    // http://mayaposch.wordpress.com/2011/11/01/how-to-really-truly-use-qthreads-the-full-explanation
    //
    // Main point: each QObject has a thread affinity which determines which
    // thread its slots will execute on, when called via a connected signal.
    QThread* loaderThread = new QThread();
    m_fileLoader = new FileLoader(m_maxPointCount);
    m_fileLoader->moveToThread(loaderThread);
    connect(loaderThread, SIGNAL(finished()), m_fileLoader, SLOT(deleteLater()));
    connect(loaderThread, SIGNAL(finished()), loaderThread, SLOT(deleteLater()));
    //connect(m_fileLoader, SIGNAL(finished()), this, SIGNAL(fileLoadFinished()));
    connect(m_fileLoader, SIGNAL(geometryLoaded(std::shared_ptr<Geometry>, bool, bool)),
            m_geometries, SLOT(addGeometry(std::shared_ptr<Geometry>, bool, bool)));
    loaderThread->start();

    //--------------------------------------------------
    // Menus
    menuBar()->setNativeMenuBar(false); // OS X doesn't activate the native menu bar under Qt5

    // File menu
    QMenu* fileMenu = menuBar()->addMenu(tr("&File"));
    QAction* openAct = fileMenu->addAction(tr("&Open"));
    openAct->setToolTip(tr("Open a data set"));
    openAct->setShortcuts(QKeySequence::Open);
    connect(openAct, SIGNAL(triggered()), this, SLOT(openFiles()));
    QAction* addAct = fileMenu->addAction(tr("&Add"));
    addAct->setToolTip(tr("Add a data set"));
    connect(addAct, SIGNAL(triggered()), this, SLOT(addFiles()));
    QAction* reloadAct = fileMenu->addAction(tr("&Reload"));
    reloadAct->setStatusTip(tr("Reload point files from disk"));
    reloadAct->setShortcut(Qt::Key_F5);
    connect(reloadAct, SIGNAL(triggered()), this, SLOT(reloadFiles()));

    fileMenu->addSeparator();
    QAction* screenShotAct = fileMenu->addAction(tr("Scree&nshot"));
    screenShotAct->setStatusTip(tr("Save screen shot of 3D window"));
    screenShotAct->setShortcut(Qt::Key_F9);
    connect(screenShotAct, SIGNAL(triggered()), this, SLOT(screenShot()));

    fileMenu->addSeparator();
    QAction* quitAct = fileMenu->addAction(tr("&Quit"));
    quitAct->setStatusTip(tr("Exit the application"));
    quitAct->setShortcuts(QKeySequence::Quit);
    connect(quitAct, SIGNAL(triggered()), this, SLOT(close()));

    // View menu
    QMenu* viewMenu = menuBar()->addMenu(tr("&View"));
    QAction* trackballMode = viewMenu->addAction(tr("Use &Trackball camera"));
    trackballMode->setCheckable(true);
    trackballMode->setChecked(false);
    // Background sub-menu
    QMenu* backMenu = viewMenu->addMenu(tr("Set &Background"));
    QSignalMapper* mapper = new QSignalMapper(this);
    // Selectable backgrounds (svg_names from SVG standard - see QColor docs)
    const char* backgroundNames[] = {/* "Display Name", "svg_name", */
                                        "Default",      "#3C3232",
                                        "Black",        "black",
                                        "Dark Grey",    "dimgrey",
                                        "Slate Grey",   "#858C93",
                                        "Light Grey",   "lightgrey",
                                        "White",        "white" };
    for(size_t i = 0; i < sizeof(backgroundNames)/sizeof(const char*); i+=2)
    {
        QAction* backgroundAct = backMenu->addAction(tr(backgroundNames[i]));
        QPixmap pixmap(50,50);
        QString colName = backgroundNames[i+1];
        pixmap.fill(QColor(colName));
        QIcon icon(pixmap);
        backgroundAct->setIcon(icon);
        mapper->setMapping(backgroundAct, colName);
        connect(backgroundAct, SIGNAL(triggered()), mapper, SLOT(map()));
    }
    connect(mapper, SIGNAL(mapped(QString)),
            this, SLOT(setBackground(QString)));
    backMenu->addSeparator();
    QAction* backgroundCustom = backMenu->addAction(tr("&Custom"));
    connect(backgroundCustom, SIGNAL(triggered()),
            this, SLOT(chooseBackground()));
    // Check boxes for drawing various scene elements by category
    viewMenu->addSeparator();
    QAction* drawBoundingBoxes = viewMenu->addAction(tr("Draw Bounding bo&xes"));
    drawBoundingBoxes->setCheckable(true);
    drawBoundingBoxes->setChecked(true);
    QAction* drawCursor = viewMenu->addAction(tr("Draw 3D &Cursor"));
    drawCursor->setCheckable(true);
    drawCursor->setChecked(true);
    QAction* drawAxes = viewMenu->addAction(tr("Draw &Axes"));
    drawAxes->setCheckable(true);
    drawAxes->setChecked(true);
    QAction* drawGrid = viewMenu->addAction(tr("Draw &Grid"));
    drawGrid->setCheckable(true);
    drawGrid->setChecked(false);

    // Shader menu
    QMenu* shaderMenu = menuBar()->addMenu(tr("&Shader"));
    QAction* openShaderAct = shaderMenu->addAction(tr("&Open"));
    openShaderAct->setToolTip(tr("Open a shader file"));
    connect(openShaderAct, SIGNAL(triggered()), this, SLOT(openShaderFile()));
    QAction* editShaderAct = shaderMenu->addAction(tr("&Edit"));
    editShaderAct->setToolTip(tr("Open shader editor window"));
    QAction* saveShaderAct = shaderMenu->addAction(tr("&Save"));
    saveShaderAct->setToolTip(tr("Save current shader file"));
    connect(saveShaderAct, SIGNAL(triggered()), this, SLOT(saveShaderFile()));
    shaderMenu->addSeparator();

    // Help menu
    QMenu* helpMenu = menuBar()->addMenu(tr("&Help"));
    QAction* helpAct = helpMenu->addAction(tr("User &Guide"));
    connect(helpAct, SIGNAL(triggered()), this, SLOT(helpDialog()));
    helpMenu->addSeparator();
    QAction* aboutAct = helpMenu->addAction(tr("&About"));
    connect(aboutAct, SIGNAL(triggered()), this, SLOT(aboutDialog()));


    //--------------------------------------------------
    // Point viewer
    m_pointView = new View3D(m_geometries, format, this);
    setCentralWidget(m_pointView);
    connect(drawBoundingBoxes, SIGNAL(triggered()),
            m_pointView, SLOT(toggleDrawBoundingBoxes()));
    connect(drawCursor, SIGNAL(triggered()),
            m_pointView, SLOT(toggleDrawCursor()));
    connect(drawAxes, SIGNAL(triggered()),
            m_pointView, SLOT(toggleDrawAxes()));
    connect(drawGrid, SIGNAL(triggered()),
            m_pointView, SLOT(toggleDrawGrid()));
    connect(trackballMode, SIGNAL(triggered()),
            m_pointView, SLOT(toggleCameraMode()));
    connect(m_geometries, SIGNAL(rowsInserted(QModelIndex,int,int)),
            this, SLOT(geometryRowsInserted(QModelIndex,int,int)));

    //--------------------------------------------------
    // Docked widgets
    // Shader parameters UI
    QDockWidget* shaderParamsDock = new QDockWidget(tr("Shader Parameters"), this);
    shaderParamsDock->setFeatures(QDockWidget::DockWidgetMovable |
                                  QDockWidget::DockWidgetClosable);
    QWidget* shaderParamsUI = new QWidget(shaderParamsDock);
    shaderParamsDock->setWidget(shaderParamsUI);
    m_pointView->setShaderParamsUIWidget(shaderParamsUI);

    // Shader editor UI
    QDockWidget* shaderEditorDock = new QDockWidget(tr("Shader Editor"), this);
    shaderEditorDock->setFeatures(QDockWidget::DockWidgetMovable |
                                  QDockWidget::DockWidgetClosable |
                                  QDockWidget::DockWidgetFloatable);
    QWidget* shaderEditorUI = new QWidget(shaderEditorDock);
    m_shaderEditor = new ShaderEditor(shaderEditorUI);
    QGridLayout* shaderEditorLayout = new QGridLayout(shaderEditorUI);
    shaderEditorLayout->setContentsMargins(2,2,2,2);
    shaderEditorLayout->addWidget(m_shaderEditor, 0, 0, 1, 1);
    connect(editShaderAct, SIGNAL(triggered()), shaderEditorDock, SLOT(show()));
    shaderEditorDock->setWidget(shaderEditorUI);

    shaderMenu->addAction(m_shaderEditor->compileAction());
    connect(m_shaderEditor->compileAction(), SIGNAL(triggered()),
            this, SLOT(compileShaderFile()));

    // TODO: check if this is needed - test shader update functionality
    //connect(m_shaderEditor, SIGNAL(sendShader(QString)),
    //        &m_pointView->shaderProgram(), SLOT(setShader(QString)));

    // Log viewer UI
    QDockWidget* logDock = new QDockWidget(tr("Log"), this);
    logDock->setFeatures(QDockWidget::DockWidgetMovable |
                         QDockWidget::DockWidgetClosable);
    QWidget* logUI = new QWidget(logDock);
    m_logTextView = new LogViewer(logUI);
    m_logTextView->setReadOnly(true);
    m_logTextView->setTextInteractionFlags(Qt::TextSelectableByKeyboard | Qt::TextSelectableByMouse);
    m_logTextView->connectLogger(&g_logger); // connect to global logger
    m_progressBar = new QProgressBar(logUI);
    m_progressBar->setRange(0,100);
    m_progressBar->setValue(0);
    m_progressBar->hide();
    connect(m_fileLoader, SIGNAL(loadStepStarted(QString)),
            this, SLOT(setProgressBarText(QString)));
    connect(m_fileLoader, SIGNAL(loadProgress(int)),
            m_progressBar, SLOT(setValue(int)));
    connect(m_fileLoader, SIGNAL(resetProgress()),
            m_progressBar, SLOT(hide()));
    QVBoxLayout* logUILayout = new QVBoxLayout(logUI);
    //logUILayout->setContentsMargins(2,2,2,2);
    logUILayout->addWidget(m_logTextView);
    logUILayout->addWidget(m_progressBar);
    //m_logTextView->setLineWrapMode(QPlainTextEdit::NoWrap);
    logDock->setWidget(logUI);

    // Data set list UI
    QDockWidget* dataSetDock = new QDockWidget(tr("Data Sets"), this);
    dataSetDock->setFeatures(QDockWidget::DockWidgetMovable |
                              QDockWidget::DockWidgetClosable |
                              QDockWidget::DockWidgetFloatable);
    DataSetUI* dataSetUI = new DataSetUI(this);
    dataSetDock->setWidget(dataSetUI);
    QAbstractItemView* dataSetOverview = dataSetUI->view();
    dataSetOverview->setModel(m_geometries);
    connect(dataSetOverview, SIGNAL(doubleClicked(const QModelIndex&)),
            m_pointView, SLOT(centerOnGeometry(const QModelIndex&)));
    m_pointView->setSelectionModel(dataSetOverview->selectionModel());

    // Set up docked widgets
    addDockWidget(Qt::RightDockWidgetArea, shaderParamsDock);
    addDockWidget(Qt::LeftDockWidgetArea, shaderEditorDock);
    addDockWidget(Qt::RightDockWidgetArea, logDock);
    addDockWidget(Qt::RightDockWidgetArea, dataSetDock);
    tabifyDockWidget(logDock, dataSetDock);
    logDock->raise();
    shaderEditorDock->setVisible(false);

    // Add dock widget toggles to view menu
    viewMenu->addSeparator();
    viewMenu->addAction(shaderParamsDock->toggleViewAction());
    viewMenu->addAction(logDock->toggleViewAction());
    viewMenu->addAction(dataSetDock->toggleViewAction());

    // Create custom hook events from CLI at runtime
    m_hookManager = new HookManager(this);
}
Example #6
0
void QxtFlowViewPrivate::setModel(QAbstractItemModel * m)
{


    if (model)
    {

        disconnect(this->model, SIGNAL(columnsAboutToBeInserted(const QModelIndex & , int , int)),
                   this, SLOT(columnsAboutToBeInserted(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(columnsAboutToBeRemoved(const QModelIndex & , int , int)),
                   this, SLOT(columnsAboutToBeRemoved(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(columnsInserted(const QModelIndex & , int , int)),
                   this, SLOT(columnsInserted(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(columnsRemoved(const QModelIndex & , int , int)),
                   this, SLOT(columnsRemoved(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(dataChanged(const QModelIndex & , const QModelIndex &)),
                   this, SLOT(dataChanged(const QModelIndex & , const QModelIndex &)));
        disconnect(this->model, SIGNAL(headerDataChanged(Qt::Orientation , int , int)),
                   this, SLOT(headerDataChanged(Qt::Orientation , int , int)));
        disconnect(this->model, SIGNAL(layoutAboutToBeChanged()),
                   this, SLOT(layoutAboutToBeChanged()));
        disconnect(this->model, SIGNAL(layoutChanged()),
                   this, SLOT(layoutChanged()));
        disconnect(this->model, SIGNAL(modelAboutToBeReset()),
                   this, SLOT(modelAboutToBeReset()));
        disconnect(this->model, SIGNAL(modelReset()),
                   this, SLOT(modelReset()));
        disconnect(this->model, SIGNAL(rowsAboutToBeInserted(const QModelIndex & , int , int)),
                   this, SLOT(rowsAboutToBeInserted(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(rowsAboutToBeRemoved(const QModelIndex & , int , int)),
                   this, SLOT(rowsAboutToBeRemoved(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(rowsInserted(const QModelIndex & , int , int)),
                   this, SLOT(rowsInserted(const QModelIndex & , int , int)));
        disconnect(this->model, SIGNAL(rowsRemoved(const QModelIndex & , int , int)),
                   this, SLOT(rowsRemoved(const QModelIndex & , int , int)));
    }
    model = m;
    if (model)
    {
        rootindex = model->parent(QModelIndex());

        connect(this->model, SIGNAL(columnsAboutToBeInserted(const QModelIndex & , int , int)),
                this, SLOT(columnsAboutToBeInserted(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(columnsAboutToBeRemoved(const QModelIndex & , int , int)),
                this, SLOT(columnsAboutToBeRemoved(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(columnsInserted(const QModelIndex & , int , int)),
                this, SLOT(columnsInserted(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(columnsRemoved(const QModelIndex & , int , int)),
                this, SLOT(columnsRemoved(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(dataChanged(const QModelIndex & , const QModelIndex &)),
                this, SLOT(dataChanged(const QModelIndex & , const QModelIndex &)));
        connect(this->model, SIGNAL(headerDataChanged(Qt::Orientation , int , int)),
                this, SLOT(headerDataChanged(Qt::Orientation , int , int)));
        connect(this->model, SIGNAL(layoutAboutToBeChanged()),
                this, SLOT(layoutAboutToBeChanged()));
        connect(this->model, SIGNAL(layoutChanged()),
                this, SLOT(layoutChanged()));
        connect(this->model, SIGNAL(modelAboutToBeReset()),
                this, SLOT(modelAboutToBeReset()));
        connect(this->model, SIGNAL(modelReset()),
                this, SLOT(modelReset()));
        connect(this->model, SIGNAL(rowsAboutToBeInserted(const QModelIndex & , int , int)),
                this, SLOT(rowsAboutToBeInserted(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(rowsAboutToBeRemoved(const QModelIndex & , int , int)),
                this, SLOT(rowsAboutToBeRemoved(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(rowsInserted(const QModelIndex & , int , int)),
                this, SLOT(rowsInserted(const QModelIndex & , int , int)));
        connect(this->model, SIGNAL(rowsRemoved(const QModelIndex & , int , int)),
                this, SLOT(rowsRemoved(const QModelIndex & , int , int)));
    }

    reset();
}
void WSortFilterProxyModel::sourceLayoutChanged()
{
  layoutChanged().emit();
}
Example #8
0
void Applet::setSize(const QSize& size)
{
	m_size = size;
	layoutChanged();
}
Example #9
0
void KipiImageModel::setColumnCount(const int nColumns)
{
    emit(layoutAboutToBeChanged());
    d->columnCount = nColumns;
    emit(layoutChanged());
}
void CharacteristicsModel::setCharacteristic(int row, QVariant data)
{
    _root->child(row)->setData(data);
    emit layoutChanged();
}
void TreeModel::somethingChanged() {
    emit layoutChanged();
    //qDebug() << "Debug. [ somethingChanged() ]  GRUNKLE";
}
Example #12
0
void IxModel::raiseEvent_layoutChanged() { Q_EMIT layoutChanged(); }
Example #13
0
void IxModel::raiseEvent_layoutChanged(const QList<QPersistentModelIndex> & parents /* = QList<QPersistentModelIndex>() */, QAbstractItemModel::LayoutChangeHint hint /* = QAbstractItemModel::NoLayoutChangeHint */) { Q_EMIT layoutChanged(parents, hint); }
Example #14
0
void LayerModel::setLocked(bool l, int id)
{
    m_layers.at(id)->locked = l;
    feather::qml::command::set_layer_locked(l,id);
    layoutChanged();
}
Example #15
0
void BanTableModel::refresh()
{
    Q_EMIT layoutAboutToBeChanged();
    priv->refreshBanlist();
    Q_EMIT layoutChanged();
}
Example #16
0
/*
  Return[0]: totalFile
  Return[1]: totalSize
  Return[2]: currentFile
  */
QList<quint64> TransferModel::synchronizeItems(const QList<returnActionOnCopyList>& returnActions)
{
	loop_size=returnActions.size();
	index_for_loop=0;
	totalFile=0;
	totalSize=0;
	currentFile=0;
	emit layoutAboutToBeChanged();
	while(index_for_loop<loop_size)
	{
		const returnActionOnCopyList& action=returnActions.at(index_for_loop);
		switch(action.type)
		{
			case AddingItem:
			{
				transfertItem newItem;
				newItem.id=action.addAction.id;
				newItem.source=action.addAction.sourceFullPath;
				newItem.size=facilityEngine->sizeToString(action.addAction.size);
				newItem.destination=action.addAction.destinationFullPath;
				transfertItemList<<newItem;
				totalFile++;
				totalSize+=action.addAction.size;
				ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, size: %2, name: %3").arg(action.addAction.id).arg(action.addAction.size).arg(action.addAction.sourceFullPath));
			}
			break;
			case MoveItem:
			{
				//bool current_entry=
				if(action.userAction.position<0)
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				if(action.userAction.position>(transfertItemList.size()-1))
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				if(action.userAction.moveAt<0)
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				if(action.userAction.moveAt>(transfertItemList.size()-1))
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				transfertItemList.move(action.userAction.position,action.userAction.moveAt);
			}
			break;
			case RemoveItem:
			{
				if(currentIndexSearch>0 && action.userAction.position<=currentIndexSearch)
					currentIndexSearch--;
				if(action.userAction.position<0)
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				if(action.userAction.position>(transfertItemList.size()-1))
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("id: %1, position is wrong: %3").arg(action.addAction.id).arg(action.userAction.position));
					break;
				}
				transfertItemList.removeAt(action.userAction.position);
				currentFile++;
				startId.remove(action.addAction.id);
				stopId.remove(action.addAction.id);
			}
			break;
			case PreOperation:
			{
				ItemOfCopyListWithMoreInformations tempItem;
				tempItem.currentProgression=0;
				tempItem.generalData=action.addAction;
				tempItem.actionType=action.type;
				internalRunningOperation[action.addAction.id]=tempItem;
				ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("set for file %1: actionType: PreOperation").arg(action.addAction.id));
			}
			break;
			case Transfer:
			{
				ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("found entry for file %1: actionType: Transfer").arg(action.addAction.id));
				if(!startId.contains(action.addAction.id))
					startId << action.addAction.id;
				stopId.remove(action.addAction.id);
				if(internalRunningOperation.contains(action.addAction.id))
					internalRunningOperation[action.addAction.id].actionType=action.type;
				else
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Warning,QString("unable to found entry for file %1: actionType: Transfer").arg(action.addAction.id));
			}
			break;
			case PostOperation:
			{
				if(!stopId.contains(action.addAction.id))
					stopId << action.addAction.id;
				startId.remove(action.addAction.id);
				internalRunningOperation.remove(action.addAction.id);
			}
			break;
			case CustomOperation:
			{
				bool custom_with_progression=(action.addAction.size==1);
				//without progression
				if(custom_with_progression)
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("switch the file: %1 to custom operation with progression").arg(action.addAction.id));
					if(startId.remove(action.addAction.id))
						if(!stopId.contains(action.addAction.id))
							stopId << action.addAction.id;
				}
				//with progression
				else
				{
					ULTRACOPIER_DEBUGCONSOLE(DebugLevel_Notice,QString("switch the file: %1 to custom operation without progression").arg(action.addAction.id));
					stopId.remove(action.addAction.id);
					if(!startId.contains(action.addAction.id))
						startId << action.addAction.id;
				}
				if(internalRunningOperation.contains(action.addAction.id))
				{
					ItemOfCopyListWithMoreInformations &item=internalRunningOperation[action.addAction.id];
					item.actionType=action.type;
					item.custom_with_progression=custom_with_progression;
					item.currentProgression=0;
				}
			}
			break;
			default:
				//unknow code, ignore it
			break;
		}
		index_for_loop++;
	}
	emit layoutChanged();
	return QList<quint64>() << totalFile << totalSize << currentFile;
}
Example #17
0
void File_list_model::set_columns(const Columns &new_columns) {
  emit layoutAboutToBeChanged();
  columns = new_columns;
  update_current_columns();
  emit layoutChanged();
}
/*virtual*/
void AbstractItemView::setModel(QAbstractItemModel *model, AbstractViewItem *prototype)
{    
    if( m_model == model || !model)
        return;

    if (m_model) {
        disconnect(m_model, SIGNAL(destroyed()),
                   this, SLOT(_q_modelDestroyed()));
        disconnect(m_model, SIGNAL(dataChanged(QModelIndex,QModelIndex)),
                   this, SLOT( dataChanged(QModelIndex,QModelIndex)));
        disconnect(m_model, SIGNAL(rowsInserted(QModelIndex,int,int)),
                   this, SLOT(rowsInserted(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(rowsRemoved(QModelIndex,int,int)),
                   this, SLOT(rowsRemoved(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(rowsAboutToBeRemoved(QModelIndex,int,int)),
                   this, SLOT(rowsAboutToBeRemoved(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(rowsAboutToBeInserted(QModelIndex,int,int)),
                   this, SLOT(rowsAboutToBeInserted(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(columnsInserted(QModelIndex,int,int)),
                   this, SLOT(columnsInserted(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(columnsAboutToBeInserted(QModelIndex,int,int)),
                   this, SLOT(columnsAboutToBeInserted(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(columnsRemoved(QModelIndex,int,int)),
                   this, SLOT(columnsRemoved(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(columnsAboutToBeRemoved(QModelIndex,int,int)),
                   this, SLOT(columnsAboutToBeRemoved(QModelIndex,int,int)));
        disconnect(m_model, SIGNAL(modelReset()), this, SLOT(reset()));
        disconnect(m_model, SIGNAL(layoutChanged()), this, SLOT(_q_layoutChanged()));

        m_model = 0;
    }

    setSelectionModel(0);

    m_currentIndex = QModelIndex();
    m_rootIndex = QModelIndex();

    m_model = model;

    Q_ASSERT_X(m_model->index(0,0) == m_model->index(0,0),
               "AbstractItemView::setModel",
               "A model should return the exact same index "
               "(including its internal id/pointer) when asked for it twice in a row.");
    Q_ASSERT_X(m_model->index(0,0).parent() == QModelIndex(),
               "AbstractItemView::setModel",
               "The parent of a top level index should be invalid");


    connect(m_model, SIGNAL(destroyed()), this, SLOT(modelDestroyed()));
    connect(m_model, SIGNAL(dataChanged(QModelIndex,QModelIndex)),
            this, SLOT( dataChanged(QModelIndex,QModelIndex)));
    connect(m_model, SIGNAL(rowsAboutToBeInserted(QModelIndex,int,int)),
            this, SLOT(rowsAboutToBeInserted(QModelIndex,int,int)));
    connect(m_model, SIGNAL(rowsInserted(QModelIndex,int,int)),
            this, SLOT(rowsInserted(QModelIndex,int,int)));
    connect(m_model, SIGNAL(rowsAboutToBeRemoved(QModelIndex,int,int)),
            this, SLOT(rowsAboutToBeRemoved(QModelIndex,int,int)));
    connect(m_model, SIGNAL(rowsRemoved(QModelIndex,int,int)),
            this, SLOT(rowsRemoved(QModelIndex,int,int)));
    connect(m_model, SIGNAL(modelReset()), this, SLOT(reset()));
    connect(m_model, SIGNAL(layoutChanged()), this, SLOT(layoutChanged()));

    setSelectionModel(new QItemSelectionModel(m_model));

    if (prototype && m_container) {
        m_container->setItemPrototype(prototype);
        m_container->reset();
    }
}
 void Project_ItemModel::interface_changed(){
	 QModelIndex root_index = this->root_index();
	 emit dataChanged(root_index, root_index);
	 emit layoutChanged();
 }
void WorkPackageProxyModel::setSourceModel( QAbstractItemModel *model )
{
    if ( sourceModel() ) {
        disconnect(sourceModel(), SIGNAL(dataChanged(QModelIndex,QModelIndex)),
                this, SLOT(sourceDataChanged(QModelIndex,QModelIndex)));
/*        disconnect(sourceModel(), SIGNAL(headerDataChanged(Qt::Orientation,int,int)),
                this, SLOT(sourceHeaderDataChanged(Qt::Orientation,int,int)));*/
        disconnect(sourceModel(), SIGNAL(layoutChanged()),
                this, SIGNAL(layoutChanged()));
        disconnect(sourceModel(), SIGNAL(layoutAboutToBeChanged()),
                this, SIGNAL(layoutAboutToBeChanged()));
        disconnect(sourceModel(), SIGNAL(rowsAboutToBeInserted(QModelIndex,int,int)),
                this, SLOT(sourceRowsAboutToBeInserted(QModelIndex,int,int)));
        disconnect(sourceModel(), SIGNAL(rowsInserted(QModelIndex,int,int)),
                this, SLOT(sourceRowsInserted(QModelIndex,int,int)));
        disconnect(sourceModel(), SIGNAL(rowsAboutToBeRemoved(QModelIndex,int,int)),
                this, SLOT(sourceRowsAboutToBeRemoved(QModelIndex,int,int)));
        disconnect(sourceModel(), SIGNAL(rowsRemoved(QModelIndex,int,int)),
                this, SLOT(sourceRowsAboutToBeRemoved(QModelIndex,int,int)));
/*
        disconnect(sourceModel(), SIGNAL(columnsAboutToBeInserted(QModelIndex,int,int)),
                this, SLOT(sourceColumnsAboutToBeInserted(QModelIndex,int,int)));
        disconnect(sourceModel(), SIGNAL(columnsInserted(QModelIndex,int,int)),
                this, SLOT(sourceColumnsInserted(QModelIndex,int,int)));

        disconnect(sourceModel(), SIGNAL(columnsAboutToBeRemoved(QModelIndex,int,int)),
                this, SLOT(sourceColumnsAboutToBeRemoved(QModelIndex,int,int)));
        disconnect(sourceModel(), SIGNAL(columnsRemoved(QModelIndex,int,int)),
                this, SLOT(sourceColumnsRemoved(QModelIndex,int,int)));
        */
        disconnect(sourceModel(), SIGNAL(modelAboutToBeReset()), this, SLOT(sourceModelAboutToBeReset()));
        disconnect(sourceModel(), SIGNAL(modelReset()), this, SLOT(sourceModelReset()));

        disconnect(sourceModel(), SIGNAL(rowsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceRowsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)));
        disconnect(sourceModel(), SIGNAL(rowsMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceRowsMoved(QModelIndex,int,int,QModelIndex,int)));
/*
        disconnect(sourceModel(), SIGNAL(columnsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceColumnsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)));
        disconnect(sourceModel(), SIGNAL(columnsMoved(QModelIndex&parent,int,int,QModelIndex,int)),
                this, SLOT(sourceColumnsMoved(QModelIndex&parent,int,int,QModelIndex,int)));*/
    }
    QAbstractProxyModel::setSourceModel( model );
    if ( model ) {
        connect(model, SIGNAL(dataChanged(QModelIndex,QModelIndex)),
                this, SLOT(sourceDataChanged(QModelIndex,QModelIndex)));
/*        connect(model, SIGNAL(headerDataChanged(Qt::Orientation,int,int)),
                this, SLOT(sourceHeaderDataChanged(Qt::Orientation,int,int)));*/
        connect(model, SIGNAL(layoutChanged()),
                this, SIGNAL(layoutChanged()));
        connect(model, SIGNAL(layoutAboutToBeChanged()),
                this, SIGNAL(layoutAboutToBeChanged()));
        connect(model, SIGNAL(rowsAboutToBeInserted(QModelIndex,int,int)),
                this, SLOT(sourceRowsAboutToBeInserted(QModelIndex,int,int)));
        connect(model, SIGNAL(rowsInserted(QModelIndex,int,int)),
                this, SLOT(sourceRowsInserted(QModelIndex,int,int)));
        connect(model, SIGNAL(rowsAboutToBeRemoved(QModelIndex,int,int)),
                this, SLOT(sourceRowsAboutToBeRemoved(QModelIndex,int,int)));
        connect(model, SIGNAL(rowsRemoved(QModelIndex,int,int)),
                this, SLOT(sourceRowsRemoved(QModelIndex,int,int)));
/*
        connect(model, SIGNAL(columnsAboutToBeInserted(QModelIndex,int,int)),
                this, SLOT(sourceColumnsAboutToBeInserted(QModelIndex,int,int)));
        connect(model, SIGNAL(columnsInserted(QModelIndex,int,int)),
                this, SLOT(sourceColumnsInserted(QModelIndex,int,int)));

        connect(model, SIGNAL(columnsAboutToBeRemoved(QModelIndex,int,int)),
                this, SLOT(sourceColumnsAboutToBeRemoved(QModelIndex,int,int)));
        connect(model, SIGNAL(columnsRemoved(QModelIndex,int,int)),
                this, SLOT(sourceColumnsRemoved(QModelIndex,int,int)));
        */
        connect(model, SIGNAL(modelAboutToBeReset()), this, SLOT(sourceModelAboutToBeReset()));
        connect(model, SIGNAL(modelReset()), this, SLOT(sourceModelReset()));

        connect(model, SIGNAL(rowsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceRowsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)));
        connect(model, SIGNAL(rowsMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceRowsMoved(QModelIndex,int,int,QModelIndex,int)));
/*
        connect(model, SIGNAL(columnsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)),
                this, SLOT(sourceColumnsAboutToBeMoved(QModelIndex,int,int,QModelIndex,int)));
        connect(model, SIGNAL(columnsMoved(QModelIndex&parent,int,int,QModelIndex,int)),
                this, SLOT(sourceColumnsMoved(QModelIndex&parent,int,int,QModelIndex,int)));*/
    }
}
 void QtWorkspaceMementoModel::update()
 {
   emit layoutChanged(); //This should tell the view that the data has changed.
 }
Example #22
0
void DataFilesModel::uncheckAll()
{
    emit layoutAboutToBeChanged();
    mCheckStates.clear();
    emit layoutChanged();
}
void
InstructionListModel::changeInstructions(const std::vector<SgAsmInstruction*> &insns) {
    layoutAboutToBeChanged().emit();
    insns_ = insns;
    layoutChanged().emit();
}
Example #24
0
 void ConnectionsTreeWidget::dropEvent(QDropEvent *event)
 {
     QTreeWidget::dropEvent(event);
     emit layoutChanged();
 }
Example #25
0
void ChatListModel::clearBookmarks() {
    emit layoutAboutToBeChanged();
    mucBookmarks_->clear();
    emit layoutChanged();
}
Example #26
0
 void setStations(const StationInformation::List &list)
 {
     m_stations = list;
     layoutChanged();
 }
Example #27
0
status_t MediaRoutingView::importState(
	const BMessage*						archive) {

	status_t err;

	_emptyInactiveNodeState();

	layout_t layout;
	err = archive->FindInt32("layout", (int32*)&layout);
	if(err == B_OK && layout != m_layout) {
		layoutChanged(layout);
	}
	
	const char* path;
	err = archive->FindString("bgBitmap", &path);
	if(err == B_OK) {
		BEntry entry(path);
		entry_ref ref;
		err = entry.GetRef(&ref);
		if(err == B_OK)
			_changeBackground(&ref);
	}
	else {
		rgb_color color;
		color.alpha = 255;
		if(
			archive->FindInt8("bgRed", (int8*)&color.red) == B_OK &&
			archive->FindInt8("bgGreen", (int8*)&color.green) == B_OK &&
			archive->FindInt8("bgBlue", (int8*)&color.blue) == B_OK)
				_changeBackground(color);
	}	
	
	for(int32 n = 0; ; ++n) {

		// find panel state info; stop when exhausted
		BMessage m;
		err = archive->FindMessage("panel", n, &m);
		if(err < B_OK)
			break;
		
		const char* nodeName;
		err = archive->FindString("nodeName", n, &nodeName);
		if(err < B_OK)
			break;
			
		uint32 nodeKind;
		err = archive->FindInt32("nodeKind", n, (int32*)&nodeKind);
		if(err < B_OK)
			break;

		// look up matching panel +++++ SLOW +++++
		uint32 panelIndex;
		uint32 items = countItems(DiagramItem::M_BOX);
		for(
			panelIndex = 0;
			panelIndex < items;
			++panelIndex) {
		
			MediaNodePanel* panel = dynamic_cast<MediaNodePanel*>(
				itemAt(panelIndex, DiagramItem::M_BOX));
				
			if(panel &&
				!strcmp(panel->ref->name(), nodeName) &&
				panel->ref->kind() == nodeKind) {
				
				// found match; hand message to panel
				panel->importState(&m);
				break;
			}
		}
		if(panelIndex == items) {
			// no panel found
			// if a "system node" hang onto (and re-export) state info
			bool sysOwned;
			if(m.FindBool("sysOwned", &sysOwned) == B_OK && sysOwned) {
				m_inactiveNodeState.AddItem(
					new _inactive_node_state_entry(
						nodeName, nodeKind, m));
			}
		}
	}

	updateDataRect();
	
	return B_OK;
}
Example #28
0
 void TablaModelInfo::setCabeceraV(QStringList &cabecV)   // cuando modifiquemos la cabecera vertical
 {
    cabeceraV = cabecV;     
    layoutChanged();
 }
Example #29
0
MainWindow::MainWindow(DVRServerRepository *serverRepository, QWidget *parent)
    : QMainWindow(parent), m_serverRepository(serverRepository), m_trayIcon(0)
{
    Q_ASSERT(m_serverRepository);

    bcApp->mainWindow = this;
    connect(bcApp->eventDownloadManager(), SIGNAL(eventVideoDownloadAdded(EventVideoDownload*)),
            this, SLOT(showDownloadsWindow()));

    setUnifiedTitleAndToolBarOnMac(true);
	resize(1100, 750);
    createMenu();
    updateTrayIcon();
    setObjectName("MainWindow");

    statusBar()->addPermanentWidget(new StatusBandwidthWidget(statusBar()));
    statusBar()->addWidget(new StatusBarServerAlert(m_serverRepository, statusBar()));

#ifdef Q_OS_MAC
    statusBar()->setSizeGripEnabled(false);
    if (style()->inherits("QMacStyle"))
        statusBar()->setFixedHeight(24);
#endif

    /* Experimental toolbar */
    m_mainToolbar = new QToolBar(tr("Main"));
    m_mainToolbar->setMovable(false);
    m_mainToolbar->setIconSize(QSize(16, 16));
    m_mainToolbar->addAction(QIcon(QLatin1String(":/icons/cassette.png")), tr("Events"), this, SLOT(showEventsWindow()));
	m_expandAllServersAction = m_mainToolbar->addAction(QIcon(QLatin1String(":/icons/expand-all.png")), tr("Expand All Servers"));
	m_collapseAllServersAction = m_mainToolbar->addAction(QIcon(QLatin1String(":/icons/collapse-all.png")), tr("Collapse All Servers"));
    addToolBar(Qt::TopToolBarArea, m_mainToolbar);

    /* Splitters */
    m_leftSplit = new MacSplitter(Qt::Horizontal);
    m_centerSplit = new MacSplitter(Qt::Vertical);

    /* Live view */
    m_liveView = new LiveViewWindow(serverRepository, this);

    /* Recent events */
    QWidget *eventsWidget = createRecentEvents();

    /* Layouts */
    m_leftSplit->addWidget(createSourcesList());
    m_leftSplit->addWidget(m_centerSplit);
    m_leftSplit->setStretchFactor(1, 1);
    m_leftSplit->setCollapsible(0, false);
    m_leftSplit->setCollapsible(1, false);

    m_centerSplit->addWidget(m_liveView);
    m_centerSplit->addWidget(eventsWidget);
    m_centerSplit->setStretchFactor(0, 1);
    m_centerSplit->setCollapsible(0, false);
    m_centerSplit->setCollapsible(1, false);

    /* Set center widget */
    QWidget *center = new QWidget;
    QBoxLayout *centerLayout = new QVBoxLayout(center);
    centerLayout->setMargin(0);
    centerLayout->setSpacing(0);
    centerLayout->addWidget(m_leftSplit, 1);
    setCentralWidget(center);

#ifdef Q_OS_WIN
    /* There is no top border on the statusbar on Windows, and we need one. */
    if (style()->inherits("QWindowsStyle"))
    {
        QFrame *line = new QFrame;
        line->setFrameStyle(QFrame::Plain | QFrame::HLine);
        QPalette p = line->palette();
        p.setColor(QPalette::WindowText, QColor(171, 175, 183));
        line->setPalette(p);
        line->setFixedHeight(1);
        centerLayout->addWidget(line);
    }
#endif

    QSettings settings;
    bcApp->liveView->setBandwidthMode(settings.value(QLatin1String("ui/liveview/bandwidthMode")).toInt());
    restoreGeometry(settings.value(QLatin1String("ui/main/geometry")).toByteArray());
    if (!m_centerSplit->restoreState(settings.value(QLatin1String("ui/main/centerSplit")).toByteArray()))
    {
        m_centerSplit->setSizes(QList<int>() << 1000 << 130);
    }
    if (!m_leftSplit->restoreState(settings.value(QLatin1String("ui/main/leftSplit")).toByteArray()))
    {
#ifdef Q_OS_MAC
        m_leftSplit->setSizes(QList<int>() << 210 << 1000);
#else
        m_leftSplit->setSizes(QList<int>() << 190 << 1000);
#endif
    }

    m_leftSplit->setHandleWidth(2);
    m_centerSplit->setHandleWidth(2);

    QString lastLayout = settings.value(QLatin1String("ui/cameraArea/lastLayout"), tr("Default")).toString();
    m_liveView->setLayout(lastLayout);

    connect(m_liveView, SIGNAL(layoutChanged(QString)), SLOT(liveViewLayoutChanged(QString)));
    connect(m_leftSplit, SIGNAL(splitterMoved(int,int)), SLOT(updateToolbarWidth()));
    updateToolbarWidth();

    connect(bcApp, SIGNAL(sslConfirmRequired(DVRServer*,QList<QSslError>,QSslConfiguration)),
            SLOT(sslConfirmRequired(DVRServer*,QList<QSslError>,QSslConfiguration)));
    connect(bcApp, SIGNAL(queryLivePaused()), SLOT(queryLivePaused()));
    connect(m_serverRepository, SIGNAL(serverAdded(DVRServer*)), SLOT(onServerAdded(DVRServer*)));

    foreach (DVRServer *s, m_serverRepository->servers())
        onServerAdded(s);

    connect(qApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));

    m_sourcesList->setFocus(Qt::OtherFocusReason);

    connect(m_expandAllServersAction, SIGNAL(triggered()), m_sourcesList, SLOT(expandAll()));
    connect(m_collapseAllServersAction, SIGNAL(triggered()), m_sourcesList, SLOT(collapseAll()));

    retranslateUI();

    if (settings.value(QLatin1String("ui/saveSession"), false).toBool())
        m_liveView->restoreSession();
}
Example #30
0
void LayerModel::setColor(QColor color, int id)
{
    m_layers.at(id)->color = color;
    feather::qml::command::set_layer_color(color.red(), color.green(), color.blue(), id);
    layoutChanged();
}