C++ (Cpp) mxc_init_pata Examples

Example #1

0

Show file

File: mx51_3stack.c Project: R0-Developers/YP-R0_Kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_clocks_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);

	mxc_expio_init();
	mxc_init_enet();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_keypad();
	mxc_init_nand_mtd();
	mxc_init_mmc();

#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE)

#ifdef CONFIG_I2C_MXC_SELECT1
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
#endif

#ifdef CONFIG_I2C_MXC_SELECT2
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));
#endif

#endif

}

Example #2

0

Show file

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_clocks_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();
	mxc_init_pmic_audio();
	mxc_gpio_init();
	mx31ads_gpio_init();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_extuart();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();

	i2c_register_board_info(0, mxc_i2c_info, ARRAY_SIZE(mxc_i2c_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_ir();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
}

Example #3

0

Show file

File: mx35_3stack.c Project: vasubabu/kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();

	mxc_register_gpios();
	mxc_init_devices();
	if (!board_is_rev(BOARD_REV_2))
		mx35_3stack_fixup_for_board_v1();
	mx35_3stack_gpio_init();
	mxc_init_enet();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();

	mx35_3stack_init_mc13892();
	mx35_3stack_init_mc9s08dz60();
	mxc_init_lcd();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_sgtl5000();
	mxc_init_ak4647();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));

	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mxc_init_mmc();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
	mxc_init_mlb();
	mxc_init_fec();
}

Example #4

0

Show file

File: mx51_3stack.c Project: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	int err;

	mxc_cpu_common_init();
	mxc_gpio_init();
	mx51_3stack_io_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();

	mxc_expio_init();
	mxc_init_enet();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_keypad();
	mxc_init_nand_mtd();
	mxc_init_mmc();
	mxc_init_sim();
	mxc_init_srpgconfig();
	mx51_3stack_init_mc13892();

#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE)

#ifdef CONFIG_I2C_MXC_SELECT1
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
#endif
#ifdef CONFIG_I2C_MXC_SELECT2
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));
#endif
#if defined(CONFIG_I2C_MXC_HS) || defined(CONFIG_I2C_MXC_HS_MODULE)
	i2c_register_board_info(3, mxc_i2c_hs_board_info,
				ARRAY_SIZE(mxc_i2c_hs_board_info));
#endif

#endif
	mxc_init_touchscreen();
	mxc_init_wm8903();
	mxc_init_sgtl5000();
	mxc_init_bluetooth();
	mxc_init_gps();

	err = mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_GPIO);
	if (err)
		printk(KERN_ERR "Error: bt reset request gpio failed!\n");
	else
	mxc_set_gpio_direction(MX51_PIN_EIM_D19, 0);
}

Example #5

0

Show file

File: devices.c Project: Timesys/linux-timesys

static int __init mxc_init_devices(void)
{
	mxc_init_wdt();
	mxc_init_mmc();
	mxc_init_spi();
	mxc_init_i2c();
	mxc_init_rtc();
	mxc_init_scc();
	mxc_init_owire();
	mxc_init_vpu();
#ifndef CONFIG_MX27_DPTC
	mxc_init_dptc();
#endif
	mxc_init_pata();

	return 0;
}

Example #6

0

Show file

File: mx3_3stack.c Project: vasubabu/kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	/* config CS5 for debug board */
	mxc_request_iomux(MX31_PIN_CS5, OUTPUTCONFIG_FUNC, INPUTCONFIG_FUNC);

	mxc_cpu_common_init();
	mxc_register_gpios();
	mxc_init_devices();

	/*Pull down MX31_PIN_USB_BYP to reset USB3317 */
	mxc_request_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	gpio_request(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), "usb_byp");
	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), 0);
	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), 0);
	mxc_free_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO, INPUTCONFIG_NONE);

	/* Reset BT/WiFi chip */
	mxc_request_iomux(MX31_PIN_DCD_DCE1, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), "dcd_dce1");
	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), 0);
	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), 0);

	mxc_init_pmic_audio();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_enet();
	mxc_init_nand_mtd();
	mxc_init_ch7024();
	mx3_3stack_init_mc13783();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
}

Example #7

0

Show file

File: mx3_3stack.c Project: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	/* config CS5 for debug board */
	mxc_request_iomux(MX31_PIN_CS5, OUTPUTCONFIG_FUNC, INPUTCONFIG_FUNC);

	mxc_cpu_common_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();

	/*Pull down MX31_PIN_USB_BYP to reset USB3317 */
	mxc_request_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	mxc_set_gpio_direction(MX31_PIN_USB_BYP, 0);
	mxc_set_gpio_dataout(MX31_PIN_USB_BYP, 0);
	mxc_free_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO, INPUTCONFIG_NONE);

	/* Reset BT/WiFi chip */
	mxc_request_iomux(MX31_PIN_DCD_DCE1, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	mxc_set_gpio_direction(MX31_PIN_DCD_DCE1, 0);
	mxc_set_gpio_dataout(MX31_PIN_DCD_DCE1, 0);

	mxc_init_pmic_audio();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_enet();
	mxc_init_nand_mtd();
	mxc_init_ch7024();
	mx3_3stack_init_mc13783();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
}

Example #8

0

Show file

File: mx37_3stack.c Project: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();
	if (!board_is_mx37(BOARD_REV_2))
		mx37_3stack_fixup_for_board_v1();
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));

	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mxc_init_nand_mtd();
	mxc_init_mmc();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_bluetooth();
	mxc_init_gps();
	mxc_init_sgtl5000();
}

Example #9

0

Show file

File: devices.c Project: Timesys/linux-timesys

static int __init mxc_init_devices(void)
{
    mxc_init_wdt();
    mxc_init_ipu();
    mxc_init_mmc();
    mxc_init_spi();
    mxc_init_i2c();
    mxc_init_rtc();
    mxc_init_owire();
    mxc_init_pcmcia();
    mxc_init_scc();
    mxc_init_hmp4e();
    mxc_init_dma();
#ifndef CONFIG_MXC_DPTC
    ckih_clk = clk_get(NULL, "ckih");
    mxc_init_dptc();
#endif
    mxc_init_vpu();
    mxc_init_pata();

    /* SPBA configuration for SSI2 - SDMA and MCU are set */
    spba_take_ownership(SPBA_SSI2, SPBA_MASTER_C | SPBA_MASTER_A);
    return 0;
}