int pdfcrop_page(PDFDoc *doc, Catalog *catalog, SplashOutputDev *dev, int i) {
PDFRectangle rect;
Page *page = catalog->getPage(i);
if(opt_margin){
set_media_box(doc, i, opt_margin);
}else{
rect = measure_margin(doc, dev, i);
set_media_box(doc, i, &rect);
}
if(opt_debug){
printf("page=%d, box=[", i);
print_rect(page->getMediaBox());
printf("], crop=[");
print_rect(&rect);
printf("]\n");
}
return 0;
}
int main(int argc, char *argv[])
{
struct rectangle rect = get_rect();
print_rect(rect);
printf("The area of this rectangle: %d\n", rect_area(rect));
printf("Enter a point to check if in the rectangle:");
struct point po = get_point();
if (point_in_rect(po, rect)) {
printf("The point is in the rectangle\n");
} else {
printf("The point is not in the rectangle\n");
}
return 0;
}
void CPrint::OnPaint()
{
if(m_bRepaintPreview){
CWnd* item = GetDlgItem(IDC_PREVIEW_FRAME);
CRect prerect;
item->GetWindowRect(prerect);
ScreenToClient(prerect);
int obase = m_Calculator->m_base;
m_Calculator->m_base = 10;
UpdateData();
CDC print_dc;
print_dc.Attach(m_PrintDlg.GetPrinterDC()); // Attach a printer DC
CPaintDC dc(this); // device context for painting
CPoint ul(prerect.left + 10, prerect.top + 19);
CRect print_rect(0,0, print_dc.GetDeviceCaps(HORZRES), print_dc.GetDeviceCaps(VERTRES));
CRect window_rect(0,0,prerect.Width() - 20, prerect.Height() - 25);
double scale_factor;
TRACE("print_rect.Width=%d print_rect.Height=%d\n", print_rect.Width(), print_rect.Height());
if((double(print_rect.Width())/double(print_rect.Height())) >
(double(window_rect.Width())/double(window_rect.Height())))
scale_factor = double(window_rect.Width()) / double(print_rect.Width());
else
scale_factor = double(window_rect.Height()) / double(print_rect.Height());
CPoint start;
start.x = ul.x + (double(window_rect.Width() - (print_rect.Width() * scale_factor)) / 2.0);
start.y = ul.y + (double(window_rect.Height() - (print_rect.Height() * scale_factor)) / 2.0);
//////////// DRAW PAPER
CBrush brush(RGB(255,255,255)), *pOldBrush;
pOldBrush = dc.SelectObject(&brush);
CPen penBlack;
penBlack.CreatePen(PS_SOLID, 0, RGB(0,0,0));
CPen* pOldPen = dc.SelectObject(&penBlack);
dc.Rectangle(start.x - 3, start.y - 3,
start.x + (print_rect.Width() * scale_factor) + 3,
start.y + (print_rect.Height() * scale_factor) + 3);
dc.SelectObject(pOldPen);
//////////// END DRAW PAPER
//////////// Calculate width and height
long double w, h;
if(m_iPageSize == 1){
double scale;
if((double(print_rect.Width()) / double(m_graph_width)) >
(double(print_rect.Height()) / double(m_graph_height)))
scale = (double(print_rect.Height()) / 2.0) / double(m_graph_height);
else
scale = (double(print_rect.Width()) / 2.0) / double(m_graph_width);
h = (double(m_graph_height)/double(print_dc.GetDeviceCaps(LOGPIXELSY))) * scale;
w = (double(m_graph_width)/double(print_dc.GetDeviceCaps(LOGPIXELSX))) * scale;
}
else if(m_iPageSize == 0){
w = double(print_rect.Width()) / double(print_dc.GetDeviceCaps(LOGPIXELSX));
h = double(print_rect.Height()) / double(print_dc.GetDeviceCaps(LOGPIXELSY));
}
else{
m_Calculator->StringToDecimal(m_sWidth, 10, w);
m_Calculator->StringToDecimal(m_sHeight, 10, h);
w = m_Calculator->abs(w);
h = m_Calculator->abs(h);
// convert width
if(m_sWUnits == "cm")
w *= 0.39370078740157;
// convert height
if(m_sHUnits == "cm")
h *= 0.39370078740157;
}
// I now have desired width and height in inches
CPoint gstart(start.x, start.y);
double max_h((double(print_rect.Height()) / double(print_dc.GetDeviceCaps(LOGPIXELSY))));
double max_w((double(print_rect.Width()) / double(print_dc.GetDeviceCaps(LOGPIXELSX))));
// resize max height based on printing options
if(m_bTitleOn){
max_h -= (0.25 + 0.125);
gstart.y += ((0.25 + 0.125) * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor);
}
if(m_bEquations)
max_h -= (1.5 + 0.125);
// error check for desired size too large too large
if(w > (max_w + 0.0001)){
w = max_w;
m_Calculator->DecimalToString(m_sWidth, w);
if(m_iPageSize == 2)
SetDimensionsW(w);
}
if(h > (max_h + 0.0001)){
h = max_h;
m_Calculator->DecimalToString(m_sHeight, h);
if(m_iPageSize == 2)
SetDimensionsH(h);
}
// now convert inches into device units (ie device pixels)
w *= print_dc.GetDeviceCaps(LOGPIXELSX) * scale_factor; // scale w for window
h *= print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor; // scale h for window
//////////// END Calculate width and height
//////////// Draw Graph Rectangle
CBrush gray(RGB(128,128,128));
dc.SelectObject(&gray);
if(m_bCenter){
gstart.x += ((print_rect.Width() * scale_factor) / 2.0) - (w / 2.0);
double th(h);
if(m_bTitleOn)
th += ((0.25 + 0.125) * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor);
if(m_bEquations)
th += ((1.5 + 0.125) * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor);
gstart.y += (double(print_rect.Height() * scale_factor) / 2.0) - (double(th) / 2.0);
}
dc.Rectangle(gstart.x,
gstart.y,
gstart.x + w,
gstart.y + h);
//////////// END Draw Graph Rectangle
if(m_bEquations){
//////////// Draw Equations List
CPoint estart(gstart.x, gstart.y + h +(0.125 * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor));
CPoint eend(gstart.x + w, gstart.y + h + (1.625 * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor));
int ew(w);
if(ew < (5 * print_dc.GetDeviceCaps(LOGPIXELSX) * scale_factor)) // check for min eqs list size
ew = (5 * print_dc.GetDeviceCaps(LOGPIXELSX) * scale_factor);
if(ew > (max_w * print_dc.GetDeviceCaps(LOGPIXELSX) * scale_factor))
ew = max_w;
if((eend.y - estart.y) > (max_h * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor))
eend.y = estart.y + max_h;
estart.x = (gstart.x + (double(w) / 2.0)) - (double(ew) / 2.0);
if(estart.x < start.x)
estart.x = start.x;
eend.x = estart.x + ew;
dc.SelectObject(&brush);
dc.Rectangle(estart.x, estart.y, eend.x, eend.y);
//////////// END Draw Equations List
}
if(m_bTitleOn){
//////////// Draw Title Rectangle
dc.SelectObject(&brush);
dc.Rectangle(start.x,
start.y,
start.x + (print_rect.Width() * scale_factor),
start.y + (0.25 * print_dc.GetDeviceCaps(LOGPIXELSY) * scale_factor));
//////////// END Draw Title Rectangle
}
dc.SelectObject(pOldBrush);
print_dc.Detach();
UpdateData(true);
m_Calculator->m_base = obase;
}
}