int do_restart(int nargs, char **args)
{
struct service *svc;
svc = service_find_by_name(args[1]);
if (svc) {
service_restart(svc);
}
return 0;
}
static void msg_restart(const char *name)
{
struct service *svc = service_find_by_name(name);
if (svc) {
service_restart(svc);
} else {
ERROR("no such service '%s'\n", name);
}
}
void aoss_save(webs_t wp)
{
char buf[32];
nvram_set("aoss_enable", websGetVar(wp, "aoss_enable", "0"));
nvram_set("aoss_aes", websGetVar(wp, "aoss_aes", "0"));
nvram_set("aoss_tkip", websGetVar(wp, "aoss_tkip", "0"));
nvram_set("aoss_wep", websGetVar(wp, "aoss_wep", "0"));
#ifdef HAVE_WPS
nvram_set("wps_enabled", websGetVar(wp, "wps_enabled", "0"));
char *pin = websGetVar(wp, "wps_ap_pin", NULL);
if (pin)
nvram_set("pincode", pin);
#endif
// check if at least one value was set
if (nvram_match("aoss_aes", "0")
&& nvram_match("aoss_tkip", "0")
&& nvram_match("aoss_wep", "0")) {
nvram_set("aoss_aes", "1");
}
if (strlen(nvram_safe_get("aoss_vifs"))) {
nvram_unset("ath0_vifs");
nvram_unset("aoss_vifs");
nvram_commit();
}
if (strlen(nvram_safe_get("aossa_vifs"))) {
nvram_unset("ath1_vifs");
nvram_unset("aossa_vifs");
nvram_commit();
}
char *registrar = websGetVar(wp, "wps_registrar", NULL);
if (registrar && nvram_invmatch("wps_registrar", registrar)) {
nvram_set("wps_registrar", registrar);
addAction("wireless");
nvram_set("nowebaction", "1");
service_restart();
}
// all other vars
//validate_cgi(wp);
}
void period_check(int sig)
{
FILE *fp;
unsigned int val = 0;
#ifdef HAVE_RADIOOFF
if (initses == 1 && nvram_match("radiooff_boot_off", "1")
&& nvram_match("radiooff_button", "1")) {
ses_mode = 1;
initses = 0;
}
#endif
// time_t t;
// time(&t);
// DEBUG("resetbutton: now time=%d\n", t);
#if defined(HAVE_MAGICBOX) || defined(HAVE_FONERA) || defined(HAVE_WHRAG108) || defined(HAVE_GATEWORX) || defined(HAVE_STORM) || defined(HAVE_LS2) || defined(HAVE_CA8) || defined(HAVE_TW6600) || defined(HAVE_LS5) || defined(HAVE_LSX) || defined(HAVE_WP54G) || defined(HAVE_NP28G) || defined(HAVE_SOLO51) || defined(HAVE_OPENRISC) || defined(HAVE_DANUBE) || defined(HAVE_WDR4900) || defined(HAVE_VENTANA)
val = getbuttonstate();
#ifdef HAVE_WRK54G
if (val)
val = 0;
else
val = 1;
#endif
#ifndef HAVE_ALPHA
#ifdef HAVE_USR5453
if (val)
val = 0;
else
val = 1;
#endif
#endif
#else
if (brand == ROUTER_BOARD_WCRGN) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_WHRG300N) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_HAMEA15) {
val = get_gpio(0);
} else if (brand == ROUTER_BOARD_ECB9750) {
val = get_gpio(11) << 11;
} else if (brand == ROUTER_BOARD_NEPTUNE) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_RT3352) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_WR5422) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_DIR600B) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_F5D8235) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_ASUS_RTN10PLUS) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_RT15N) {
val = get_gpio(12) << 12;
} else if (brand == ROUTER_BOARD_DIR615D) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_ESR6650) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_EAP9550) {
val = get_gpio(0);
} else if (brand == ROUTER_BOARD_ESR9752) {
val = get_gpio(0);
} else if (brand == ROUTER_BOARD_AR670W) {
val = get_gpio(9) << 9;
} else if (brand == ROUTER_BOARD_AR690W) {
val = get_gpio(9) << 9;
} else if (brand == ROUTER_BOARD_BR6574N) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_ACXNR22) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_TECHNAXX3G) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_WHR300HP2) {
val = get_gpio(52) << 1;
} else if (brand == ROUTER_BOARD_W502U) {
val = get_gpio(10) << 10;
} else if (brand == ROUTER_BOARD_GW2380) {
val = get_gpio(240);
} else if (brand == ROUTER_BOARD_GW2388) {
val = get_gpio(240);
} else {
if ((fp = fopen(GPIO_FILE, "r"))) {
#ifdef HAVE_XSCALE
fscanf(fp, "%d", &val);
#else
if (brand == ROUTER_NETGEAR_WGR614L) //gpio 7 power led shared with reset button
{
set_gpio(7, 1); //disable power led
val = get_gpio(7) << 7; //read and shift value
set_gpio(7, 0); //enable power led
} else {
fread(&val, 4, 1, fp);
}
#endif
fclose(fp);
} else
perror(GPIO_FILE);
}
#endif
DEBUG("resetbutton: GPIO = 0x%x\n", val);
int gpio = 0;
int state = 0;
#if defined(HAVE_XSCALE) || defined(HAVE_MAGICBOX) || defined(HAVE_FONERA) || defined(HAVE_WHRAG108) || defined(HAVE_GATEWORX) || defined(HAVE_STORM) || defined(HAVE_LS2) || defined(HAVE_CA8) || defined(HAVE_TW6600) || defined(HAVE_LS5) || defined(HAVE_LSX) || defined(HAVE_WP54G) || defined(HAVE_NP28G) || defined(HAVE_SOLO51) || defined(HAVE_OPENRISC) || defined(HAVE_DANUBE) || defined(HAVE_UNIWIP) || defined(HAVE_VENTANA)
state = val;
int sesgpio = 0xfff;
int wifigpio = 0xfff;
int push;
int pushwifi;
#ifdef HAVE_WZRG300NH
sesgpio = 0x117;
val |= get_gpio(23) << 23; //aoss pushbutton
#elif defined(HAVE_WHR300HP2)
sesgpio = 0x102;
val |= get_gpio(53) << 2; //aoss pushbutton
#elif defined(HAVE_NEPTUNE)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_HAMEA15)
// sesgpio = 0x100;
// val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_WCRGN)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_RT3352)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_WZRG300NH2)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_WMBR_G300NH)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_WZRG450)
sesgpio = 0x108;
val |= get_gpio(8) << 8; //aoss pushbutton
#elif defined(HAVE_DIR632)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_WZRHPAG300NH)
sesgpio = 0x105;
val |= get_gpio(5) << 5; //aoss pushbutton
#elif defined(HAVE_CARAMBOLA)
sesgpio = 0xfff;
#elif defined(HAVE_HORNET)
sesgpio = 0x00b;
val |= get_gpio(11) << 11; //aoss pushbutton
#elif defined(HAVE_RB2011)
// sesgpio = 0x110;
// val |= get_gpio(16) << 16; //aoss pushbutton
#elif defined(HAVE_WDR4300)
// sesgpio = 0x110;
// val |= get_gpio(16) << 16; //aoss pushbutton
#elif defined(HAVE_WNDR3700V4)
sesgpio = 0x10f;
val |= get_gpio(15) << 15; //aoss pushbutton
#elif defined(HAVE_DIR825C1)
sesgpio = 0x110;
val |= get_gpio(16) << 16; //aoss pushbutton
#elif defined(HAVE_WASP)
sesgpio = 0x00b;
val |= get_gpio(11) << 11; //aoss pushbutton
#elif defined(HAVE_WNR2200)
// sesgpio = 0x00b; //not yet supported
// val |= get_gpio(37) << 37; //aoss pushbutton
#elif defined(HAVE_WNR2000)
sesgpio = 0x00b;
val |= get_gpio(11) << 11; //aoss pushbutton
#elif defined(HAVE_WDR2543)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_WHRHPGN)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_RT10N)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_RT15N)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_F5D8235)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_WR5422)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_DIR600)
sesgpio = 0x100;
val |= get_gpio(0); //aoss pushbutton
#elif defined(HAVE_DIR615I)
sesgpio = 0x110;
val |= get_gpio(16) << 16; //aoss pushbutton
#elif defined(HAVE_DIR615E)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_WR1043)
sesgpio = 0x107;
val |= get_gpio(7) << 7; //aoss pushbutton
#elif defined(HAVE_WR941)
sesgpio = 0x107;
val |= get_gpio(7) << 7; //aoss pushbutton
#elif defined(HAVE_MR3020)
sesgpio = 0xfff;
#elif defined(HAVE_WR741V4)
sesgpio = 0x01a;
val |= get_gpio(26) << 26; //aoss pushbutton
#elif defined(HAVE_WR741)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_WRT400)
sesgpio = 0x103;
val |= get_gpio(3) << 3; //aoss pushbutton
#elif defined(HAVE_WNDR3700)
sesgpio = 0x103;
val |= get_gpio(3) << 3; //aoss pushbutton
#elif defined(HAVE_DIR825)
sesgpio = 0x108;
val |= get_gpio(8) << 8; //aoss pushbutton
#elif defined(HAVE_TG2521)
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //aoss pushbutton
#elif defined(HAVE_OPENRISC)
sesgpio = 0x005;
val |= get_gpio(5) << 5; //aoss pushbutton
#endif
#ifdef HAVE_WRT160NL
sesgpio = 0x107;
val |= get_gpio(7) << 7; //wps/ses pushbutton
#endif
#ifdef HAVE_TEW632BRP
sesgpio = 0x10c;
val |= get_gpio(12) << 12; //wps/ses pushbutton
#endif
#else
if (brand > 0xffff) {
if ((brand & 0x000ff) != 0x000ff)
gpio = 1 << (brand & 0x000ff); // calculate gpio value.
if ((brand & 0x00100) == 0) // check reset button polarity: 0
// normal, 1 inversed
state = (val & gpio);
else
state = !(val & gpio);
} else {
if ((brand & 0x000f) != 0x000f)
gpio = 1 << (brand & 0x000f); // calculate gpio value.
if ((brand & 0x0010) == 0) // check reset button polarity: 0
// normal, 1 inversed
state = (val & gpio);
else
state = !(val & gpio);
}
/*
* 1 byte router's SES (AOSS) button gpio number and polarity; Eko
* 25.nov.06
*
* R R R P N N N N = 0xXX ----- - ------- | | gpio num | | | |--- SES -
* AOSS button polarity (0: normal, 1 inversed) | |-------- reserved for
* future use
*
* 0xff = button disabled / not available
*/
int push;
int pushwifi;
int sesgpio;
int wifigpio = 0xfff;
switch (brand) {
case ROUTER_BUFFALO_WHRG54S:
case ROUTER_BUFFALO_WZRRSG54:
case ROUTER_BUFFALO_WLI_TX4_G54HP:
sesgpio = 0x100; // gpio 0, inversed
break;
case ROUTER_BUFFALO_WLA2G54C:
sesgpio = 0x102; // gpio 2, inversed
break;
case ROUTER_BUFFALO_WBR2G54S:
sesgpio = 0x004; // gpio 4, normal
break;
case ROUTER_BUFFALO_WZR600DHP2:
case ROUTER_BUFFALO_WZR900DHP:
sesgpio = 0x109; // gpio 9, inversed
break;
case ROUTER_BUFFALO_WZR1750:
sesgpio = 0x10c; // gpio 12, inversed
break;
case ROUTER_D1800H:
sesgpio = 0x10a; // gpio 10, inversed
break;
#ifndef HAVE_BUFFALO
case ROUTER_ASUS_WL700GE:
sesgpio = 0x004; // gpio 4, normal
break;
case ROUTER_ASUS_RTN10PLUSD1:
sesgpio = 0x114; // gpio 20, inversed
break;
case ROUTER_ASUS_RTN10:
sesgpio = 0x102; // gpio 2, inversed
break;
case ROUTER_ASUS_RTN12:
case ROUTER_NETGEAR_WNR2000V2:
sesgpio = 0x100; // gpio 0, inversed
break;
case ROUTER_LINKSYS_WTR54GS:
case ROUTER_NETGEAR_WNDR4000:
sesgpio = 0x102; // gpio 2, inversed
break;
case ROUTER_WRT54G:
case ROUTER_WRT54G_V8:
case ROUTER_WRTSL54GS:
case ROUTER_WRT150N:
case ROUTER_WRT160N:
case ROUTER_WRT300N:
case ROUTER_WRT300NV11:
case ROUTER_WRT610NV2:
case ROUTER_ASKEY_RT220XD: // not soldered
case ROUTER_DYNEX_DX_NRUTER:
case ROUTER_LINKSYS_E4200:
case ROUTER_ASUS_RTN66:
sesgpio = 0x104; // gpio 4, inversed
break;
case ROUTER_ASUS_AC66U:
sesgpio = 0x104; // gpio 4, inversed
break;
case ROUTER_DLINK_DIR868:
case ROUTER_ASUS_AC67U:
wifigpio = 0x10f;
sesgpio = 0x107; // gpio 7, inversed
break;
case ROUTER_ASUS_AC56U:
wifigpio = 0x107; // gpio 7, inversed
sesgpio = 0x10f; // gpio 7, inversed
break;
case ROUTER_ASUS_WL500G_PRE:
sesgpio = 0x004; // gpio 4, normal
break;
case ROUTER_ASUS_WL550GE:
sesgpio = 0x00f; // gpio 15, normal
break;
case ROUTER_WRT310N:
case ROUTER_WRT350N:
case ROUTER_WRT610N:
case ROUTER_ASUS_RTN16:
case ROUTER_BELKIN_F7D3301:
case ROUTER_BELKIN_F7D3302:
case ROUTER_BELKIN_F7D4301:
case ROUTER_BELKIN_F7D4302:
case ROUTER_BELKIN_F5D8235V3:
case ROUTER_LINKSYS_E3200:
sesgpio = 0x108; // gpio 8, inversed
break;
case ROUTER_ASUS_WL500W:
sesgpio = 0x007; // gpio 7, normal
break;
case ROUTER_DLINK_DIR330:
sesgpio = 0x107; // gpio 7, inversed
break;
case ROUTER_ASUS_WL520GUGC:
case ROUTER_ASUS_WL500G_PRE_V2:
sesgpio = 0x103; // gpio 3, inversed
break;
case ROUTER_WAP54G_V3:
sesgpio = 0x10e; // gpio 14, inversed
break;
case ROUTER_NETGEAR_WNDR3300:
sesgpio = 0x101; // gpio 1, inversed
break;
case ROUTER_WRT54G_V81:
case ROUTER_DLINK_DIR320:
case ROUTER_WRT600N:
case ROUTER_NETGEAR_WNDR3400:
case ROUTER_NETGEAR_WNR3500L:
sesgpio = 0x106; // gpio 6, inversed
break;
case ROUTER_WRT320N:
case ROUTER_WRT160NV3:
case ROUTER_NETGEAR_WNDR4500:
case ROUTER_NETGEAR_WNDR4500V2:
case ROUTER_NETGEAR_R6300:
sesgpio = 0x104;
wifigpio = 0x105;
break;
case ROUTER_NETGEAR_R6250:
sesgpio = 0x104;
wifigpio = 0x105;
break;
case ROUTER_NETGEAR_R6300V2:
sesgpio = 0x104;
wifigpio = 0x105;
break;
case ROUTER_NETGEAR_R7000:
sesgpio = 0x104;
wifigpio = 0x105;
break;
case ROUTER_WRT310NV2:
sesgpio = 0x105; // gpio 5, inversed
break;
case ROUTER_LINKSYS_E800:
case ROUTER_LINKSYS_E900:
case ROUTER_LINKSYS_E1000V2:
case ROUTER_LINKSYS_E1500:
case ROUTER_LINKSYS_E1550:
case ROUTER_LINKSYS_E2500:
sesgpio = 0x109; // gpio 9, inversed
break;
case ROUTER_LINKSYS_EA6500:
sesgpio = 0x104; // gpio 4, inversed
break;
#endif
default:
sesgpio = 0xfff; // gpio unknown, disabled
wifigpio = 0xfff; // gpio unknown, disabled
}
#endif
push = 1 << (sesgpio & 0x0ff); // calculate push value from ses gpio
pushwifi = 1 << (wifigpio & 0x0ff); // calculate push value from ses gpio
//
//
//
// pin no.
/*
* The value is zero during button-pushed.
*/
if (state && nvram_match("resetbutton_enable", "1")) {
DEBUG("resetbutton: mode=%d, count=%d\n", mode, count);
if (mode == 0) {
/*
* We detect button pushed first time
*/
alarmtimer(0, URGENT_INTERVAL);
mode = 1;
}
{ /* Whenever it is pushed steady */
if (++count > RESET_WAIT_COUNT) {
if (check_action() != ACT_IDLE) { // Don't execute during upgrading
fprintf(stderr, "resetbutton: nothing to do...\n");
alarmtimer(0, 0); /* Stop the timer alarm */
return;
}
if ((brand & 0x000f) != 0x000f) {
printf("resetbutton: factory default.\n");
dd_syslog(LOG_DEBUG, "Reset button: restoring factory defaults now!\n");
#if !defined(HAVE_XSCALE) && !defined(HAVE_MAGICBOX) && !defined(HAVE_FONERA) && !defined(HAVE_WHRAG108) && !defined(HAVE_GATEWORX) && !defined(HAVE_LS2) && !defined(HAVE_CA8) && !defined(HAVE_TW6600) && !defined(HAVE_LS5) && !defined(HAVE_LSX) && !defined(HAVE_SOLO51)
led_control(LED_DIAG, LED_ON);
#elif defined(HAVE_WHRHPGN) || defined(HAVE_WZRG300NH) || defined(HAVE_WZRHPAG300NH) || defined(HAVE_WZRG450)
led_control(LED_DIAG, LED_ON);
#endif
ACTION("ACT_HW_RESTORE");
alarmtimer(0, 0); /* Stop the timer alarm */
#ifdef HAVE_X86
eval("mount", "/usr/local", "-o", "remount,rw");
eval("rm", "-f", "/tmp/nvram/*"); // delete nvram
// database
eval("rm", "-f", "/tmp/nvram/.lock"); // delete
// nvram
// database
eval("rm", "-f", "/usr/local/nvram/*"); // delete
// nvram
// database
eval("mount", "/usr/local", "-o", "remount,ro");
#elif HAVE_RB500
eval("rm", "-f", "/tmp/nvram/*"); // delete nvram
// database
eval("rm", "-f", "/tmp/nvram/.lock"); // delete
// nvram
// database
eval("rm", "-f", "/etc/nvram/*"); // delete nvram
// database
#elif HAVE_MAGICBOX
eval("rm", "-f", "/tmp/nvram/*"); // delete nvram
// database
eval("rm", "-f", "/tmp/nvram/.lock"); // delete
// nvram
// database
eval("erase", "nvram");
#else
#ifdef HAVE_BUFFALO_SA
int region_sa = 0;
if (nvram_default_match("region", "SA", ""))
region_sa = 1;
#endif
nvram_set("sv_restore_defaults", "1");
nvram_commit();
eval("killall", "ledtool"); // stop blinking on
// nvram_commit
#if !defined(HAVE_XSCALE) && !defined(HAVE_MAGICBOX) && !defined(HAVE_FONERA) && !defined(HAVE_WHRAG108) && !defined(HAVE_GATEWORX) && !defined(HAVE_LS2) && !defined(HAVE_CA8) && !defined(HAVE_TW6600) && !defined(HAVE_LS5) && !defined(HAVE_LSX) && !defined(HAVE_SOLO51)
led_control(LED_DIAG, LED_ON); // turn diag led on,
// so we know reset
// was pressed and
// we're restoring
// defaults.
#elif defined(HAVE_WHRHPGN) || defined(HAVE_WZRG300NH) || defined(HAVE_WZRHPAG300NH) || defined(HAVE_WZRG450)
led_control(LED_DIAG, LED_ON);
#endif
#ifdef HAVE_BUFFALO_SA
nvram_set("sv_restore_defaults", "1");
if (region_sa)
nvram_set("region", "SA");
nvram_commit();
#endif
#endif
// nvram_set ("sv_restore_defaults", "1");
// nvram_commit ();
kill(1, SIGTERM);
}
}
}
} else if ((sesgpio != 0xfff)
&& (((sesgpio & 0x100) == 0 && (val & push))
|| ((sesgpio & 0x100) == 0x100 && !(val & push)))) {
runStartup("/etc/config", ".sesbutton");
runStartup("/jffs/etc/config", ".sesbutton"); // if available
runStartup("/mmc/etc/config", ".sesbutton"); // if available
runStartup("/tmp/etc/config", ".sesbutton"); // if available
if (nvram_match("radiooff_button", "1")) {
led_control(LED_SES, LED_FLASH); // when pressed, blink white
switch (ses_mode) {
case 1:
// SES (AOSS) led
#ifdef HAVE_RADIOOFF
#ifndef HAVE_BUFFALO
dd_syslog(LOG_DEBUG, "SES / AOSS / EZ-setup button: turning radio(s) on\n");
#else
dd_syslog(LOG_DEBUG, "AOSS button: turning radio(s) on\n");
#endif
#ifndef HAVE_ERC
sysprintf("startservice radio_on");
#endif
#endif
ses_mode = 0;
break;
case 2:
// (AOSS) led
#ifdef HAVE_RADIOOFF
#ifndef HAVE_BUFFALO
dd_syslog(LOG_DEBUG, "SES / AOSS / EZ-setup button: turning radio(s) off\n");
#else
dd_syslog(LOG_DEBUG, "AOSS button: turning radio(s) off\n");
#endif
#ifndef HAVE_ERC
sysprintf("startservice radio_off");
#endif
#endif
ses_mode = 1;
break;
}
}
#ifdef HAVE_AOSS
else if (nvram_match("radiooff_button", "2")) {
sysprintf("startservice aoss");
}
#else
#endif
} else if ((wifigpio != 0xfff)
&& (((wifigpio & 0x100) == 0 && (val & pushwifi))
|| ((wifigpio & 0x100) == 0x100 && !(val & pushwifi)))) {
led_control(LED_WLAN, LED_FLASH); // when pressed, blink white
switch (wifi_mode) {
case 1:
dd_syslog(LOG_DEBUG, "Wifi button: turning radio(s) on\n");
sysprintf("startservice radio_on");
wifi_mode = 0;
break;
case 0:
// (AOSS) led
dd_syslog(LOG_DEBUG, "Wifi button: turning radio(s) off\n");
sysprintf("startservice radio_off");
wifi_mode = 1;
break;
}
} else {
/*
* Although it's unpushed now, it had ever been pushed
*/
if (mode == 1) {
if (check_action() != ACT_IDLE) { // Don't execute during upgrading
fprintf(stderr, "resetbutton: nothing to do...\n");
alarmtimer(0, 0); /* Stop the timer alarm */
return;
}
service_restart();
}
}
}