/*
* Class: ch_ntb_usb_LibusbJava
* Method: usb_get_descriptor
* Signature: (JBBI)Ljava/lang/String;
*/
JNIEXPORT jstring JNICALL Java_ch_ntb_usb_LibusbJava_usb_1get_1descriptor
(JNIEnv *env, jclass obj, jlong dev_handle, jbyte type, jbyte index, jint size)
{
clearLibusbJavaError();
char *string = (char *) malloc(size * sizeof(char));
int retVal = usb_get_descriptor((usb_dev_handle *) dev_handle, (unsigned) type,
(unsigned) index, string, size);
if (retVal > 0)
return (*env)->NewStringUTF(env, string);
return 0;
}
int musb_get_device(MUSB_INTERFACE *usb_interface)
{
#ifdef HAVE_LIBUSB
struct usb_device_descriptor d;
usb_get_descriptor(usb_interface->dev, USB_DT_DEVICE, 0, &d, sizeof(d));
return d.bcdDevice;
#elif HAVE_LIBUSB10
struct libusb_device_descriptor d;
libusb_get_descriptor(usb_interface->dev, LIBUSB_DT_DEVICE, 0, (unsigned char *)&d, sizeof(d));
return d.bcdDevice;
#else
return 0;
#endif
}
//-----------------------------------------------------------------
// get_descriptor:
//-----------------------------------------------------------------
static void get_descriptor(struct device_request *request)
{
unsigned char bDescriptorType = HI_BYTE(request->wValue);
unsigned char bDescriptorIndex = LO_BYTE( request->wValue );
unsigned short wLength = request->wLength;
unsigned char bCount = 0;
unsigned char *desc_ptr;
desc_ptr = usb_get_descriptor(bDescriptorType, bDescriptorIndex, wLength, &bCount);
if (desc_ptr)
usb_control_send(desc_ptr, bCount);
else
usbhw_control_endpoint_stall();
}
/*
* usb_get_device_descriptor - (re)reads the device descriptor (usbcore)
* @dev: the device whose device descriptor is being updated
* @size: how much of the descriptor to read
* Context: !in_interrupt ()
*
* Updates the copy of the device descriptor stored in the device structure,
* which dedicates space for this purpose.
*
* Not exported, only for use by the core. If drivers really want to read
* the device descriptor directly, they can call usb_get_descriptor() with
* type = USB_DT_DEVICE and index = 0.
*
* This call is synchronous, and may not be used in an interrupt context.
*
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
int usb_get_device_descriptor(struct usb_device *dev, unsigned int size)
{
struct usb_device_descriptor *desc;
int ret;
if (size > sizeof(*desc))
return -EINVAL;
desc = kmalloc(sizeof(*desc), GFP_NOIO);
if (!desc)
return -ENOMEM;
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size);
if (ret >= 0)
memcpy(&dev->descriptor, desc, size);
kfree(desc);
return ret;
}
static int get_desc(struct drive_info *drive) {
struct usb_device_descriptor descriptor;
usb_dev_handle *udev;
udev=usb_open(drive->usbdev);
if(!udev)
return 1;
if(usb_get_descriptor(udev,USB_DT_DEVICE,0,&descriptor,sizeof(descriptor))!=sizeof(descriptor)) {
usb_close(udev);
return 1;
}
if(usb_get_string_simple(udev,descriptor.iProduct,drive->desc,256)<=0) {
usb_close(udev);
return 1;
}
usb_close(udev);
return 0;
}
static int l_usb_get_descriptor(lua_State *L) {
struct usb_dev_handle * dev_handle = lua_touserdata(L, 1);
int type = lua_tonumber(L, 2);
int index = lua_tonumber (L, 3);
int size = lua_tonumber (L, 4);
if (size==0) {size=255;} //default value
char buf[size];
int ret = usb_get_descriptor(dev_handle,
(unsigned char)type, (unsigned char)index, buf, size);
if( ret < 0 ) {
lua_pushnil (L);
lua_pushnumber (L, ret);
return 2; /* number of results */
} else{
lua_pushlstring (L, buf, ret);
return 1; /* number of results */
}
}
/* USB::DevHandle#usb_get_descriptor(type, index, buf) */
static VALUE
rusb_get_descriptor(
VALUE v,
VALUE vtype,
VALUE vindex,
VALUE vbuf)
{
usb_dev_handle *p = get_usb_devhandle(v);
int type = NUM2INT(vtype);
int index = NUM2INT(vindex);
char *buf;
int buflen;
int ret;
StringValue(vbuf);
rb_str_modify(vbuf);
buf = RSTRING_PTR(vbuf);
buflen = RSTRING_LEN(vbuf);
ret = usb_get_descriptor(p, type, index, buf, buflen);
check_usb_error("usb_get_descriptor", ret);
return INT2NUM(ret);
}
/**
* usb_get_device_descriptor - (re)reads the device descriptor
* @dev: the device whose device descriptor is being updated
* @size: how much of the descriptor to read
* Context: !in_interrupt ()
*
* Updates the copy of the device descriptor stored in the device structure,
* which dedicates space for this purpose. Note that several fields are
* converted to the host CPU's byte order: the USB version (bcdUSB), and
* vendors product and version fields (idVendor, idProduct, and bcdDevice).
* That lets device drivers compare against non-byteswapped constants.
*
* Not exported, only for use by the core. If drivers really want to read
* the device descriptor directly, they can call usb_get_descriptor() with
* type = USB_DT_DEVICE and index = 0.
*
* This call is synchronous, and may not be used in an interrupt context.
*
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
int usb_get_device_descriptor(struct usb_device *dev, unsigned int size)
{
struct usb_device_descriptor *desc;
int ret;
if (size > sizeof(*desc))
return -EINVAL;
desc = kmalloc(sizeof(*desc), GFP_NOIO);
if (!desc)
return -ENOMEM;
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size);
if (ret >= 0) {
le16_to_cpus(&desc->bcdUSB);
le16_to_cpus(&desc->idVendor);
le16_to_cpus(&desc->idProduct);
le16_to_cpus(&desc->bcdDevice);
memcpy(&dev->descriptor, desc, size);
}
msleep(1);
kfree(desc);
return ret;
}
//! usb_process_request.
//!
//! @brief This function reads the SETUP request sent to the default control endpoint
//! and calls the appropriate function. When exiting of the usb_read_request
//! function, the device is ready to manage the next request.
//!
//! @note list of supported requests:
//! GET_DESCRIPTOR
//! GET_CONFIGURATION
//! SET_ADDRESS
//! SET_CONFIGURATION
//! CLEAR_FEATURE
//! SET_FEATURE
//! GET_STATUS
//!
void usb_process_request(void)
{
U8 bmRequest;
bmRequestType = Usb_read_byte();
bmRequest = Usb_read_byte();
switch (bmRequest)
{
case GET_DESCRIPTOR:
if (0x80 == bmRequestType) { usb_get_descriptor(); }
else goto user_read;
break;
case GET_CONFIGURATION:
if (0x80 == bmRequestType) { usb_get_configuration(); }
else goto user_read;
break;
case SET_ADDRESS:
if (0x00 == bmRequestType) { usb_set_address(); }
else goto user_read;
break;
case SET_CONFIGURATION:
if (0x00 == bmRequestType) { usb_set_configuration(); }
else goto user_read;
break;
case CLEAR_FEATURE:
if (0x02 >= bmRequestType) { usb_clear_feature(); }
else goto user_read;
break;
case SET_FEATURE:
if (0x02 >= bmRequestType) { usb_set_feature(); }
else goto user_read;
break;
case GET_STATUS:
if ((0x7F < bmRequestType) & (0x82 >= bmRequestType))
{ usb_get_status(); }
else goto user_read;
break;
case GET_INTERFACE:
if (bmRequestType == 0x81) { usb_get_interface(); }
else goto user_read;
break;
case SET_INTERFACE:
if (bmRequestType == 0x01) {usb_set_interface();}
break;
case SET_DESCRIPTOR:
case SYNCH_FRAME:
default: //!< un-supported request => call to user read request
user_read:
usb_user_read_request(bmRequestType, bmRequest);
break;
}
Usb_select_endpoint(EP_CONTROL);
// If the receive setup flag hasn't been cleared
// by this point then we can assume that we didn't
// support this request and should stall.
if(Is_usb_receive_setup())
Usb_enable_stall_handshake();
// Clear some flags.
Usb_ack_receive_setup();
Usb_ack_receive_out();
Usb_ack_in_ready();
}
void usb_fetch_and_parse_descriptors(usb_dev_handle *udev)
{
struct usb_device *dev = udev->device;
int i;
if (dev->descriptor.bNumConfigurations > USB_MAXCONFIG) {
if (usb_debug >= 1)
fprintf(stderr, "Too many configurations (%d > %d)\n", dev->descriptor.bNumConfigurations, USB_MAXCONFIG);
return;
}
if (dev->descriptor.bNumConfigurations < 1) {
if (usb_debug >= 1)
fprintf(stderr, "Not enough configurations (%d < %d)\n", dev->descriptor.bNumConfigurations, 1);
return;
}
dev->config = (struct usb_config_descriptor *)malloc(dev->descriptor.bNumConfigurations * sizeof(struct usb_config_descriptor));
if (!dev->config) {
if (usb_debug >= 1)
fprintf(stderr, "Unable to allocate memory for config descriptor\n");
return;
}
memset(dev->config, 0, dev->descriptor.bNumConfigurations *
sizeof(struct usb_config_descriptor));
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
unsigned char buffer[8], *bigbuffer;
struct usb_config_descriptor config;
int res;
/* Get the first 8 bytes so we can figure out what the total length is */
res = usb_get_descriptor(udev, USB_DT_CONFIG, (unsigned char)i, buffer, 8);
if (res < 8) {
if (usb_debug >= 1) {
if (res < 0)
fprintf(stderr, "Unable to get descriptor (%d)\n", res);
else
fprintf(stderr, "Config descriptor too short (expected %d, got %d)\n", 8, res);
}
goto err;
}
usb_parse_descriptor(buffer, "bbw", &config);
bigbuffer = malloc(config.wTotalLength);
if (!bigbuffer) {
if (usb_debug >= 1)
fprintf(stderr, "Unable to allocate memory for descriptors\n");
goto err;
}
res = usb_get_descriptor(udev, USB_DT_CONFIG, (unsigned char)i, bigbuffer,
config.wTotalLength);
if (res < config.wTotalLength) {
if (usb_debug >= 1) {
if (res < 0)
fprintf(stderr, "Unable to get descriptor (%d)\n", res);
else
fprintf(stderr, "Config descriptor too short (expected %d, got %d)\n", config.wTotalLength, res);
}
free(bigbuffer);
goto err;
}
res = usb_parse_configuration(&dev->config[i], bigbuffer);
if (usb_debug >= 2) {
if (res > 0)
fprintf(stderr, "Descriptor data still left\n");
else if (res < 0)
fprintf(stderr, "Unable to parse descriptors\n");
}
free(bigbuffer);
}
return;
err:
free(dev->config);
dev->config = NULL;
}
/* This function reads the Microsoft OS Descriptor and looks inside to
* find if it is a MTP device. This is the similar to the way that
* Windows Media Player 10 uses.
* It is documented to some degree on various internet pages.
*/
static int
gp_libusb1_match_mtp_device(struct libusb_device *dev,int *configno, int *interfaceno, int *altsettingno)
{
/* Marcus: Avoid this probing altogether, its too unstable on some devices */
return 0;
#if 0
char buf[1000], cmd;
int ret,i,i1,i2, xifaces,xnocamifaces;
usb_dev_handle *devh;
/* All of them are "vendor specific" device class */
#if 0
if ((desc.bDeviceClass!=0xff) && (desc.bDeviceClass!=0))
return 0;
#endif
if (dev->config) {
xifaces = xnocamifaces = 0;
for (i = 0; i < desc.bNumConfigurations; i++) {
unsigned int j;
for (j = 0; j < dev->config[i].bNumInterfaces; j++) {
int k;
xifaces++;
for (k = 0; k < dev->config[i].interface[j].num_altsetting; k++) {
struct usb_interface_descriptor *intf = &dev->config[i].interface[j].altsetting[k];
if ( (intf->bInterfaceClass == LIBUSB_CLASS_HID) ||
(intf->bInterfaceClass == LIBUSB_CLASS_PRINTER) ||
(intf->bInterfaceClass == LIBUSB_CLASS_AUDIO) ||
(intf->bInterfaceClass == LIBUSB_CLASS_HUB) ||
(intf->bInterfaceClass == LIBUSB_CLASS_COMM) ||
(intf->bInterfaceClass == 0xe0) /* wireless/bluetooth*/
)
xnocamifaces++;
}
}
}
}
if (xifaces == xnocamifaces) /* only non-camera ifaces */
return 0;
devh = usb_open (dev);
if (!devh)
return 0;
/*
* Loop over the device configurations and interfaces. Nokia MTP-capable
* handsets (possibly others) typically have the string "MTP" in their
* MTP interface descriptions, that's how they can be detected, before
* we try the more esoteric "OS descriptors" (below).
*/
if (dev->config) {
for (i = 0; i < desc.bNumConfigurations; i++) {
unsigned int j;
for (j = 0; j < dev->config[i].bNumInterfaces; j++) {
int k;
for (k = 0; k < dev->config[i].interface[j].num_altsetting; k++) {
buf[0] = '\0';
ret = usb_get_string_simple(devh,
dev->config[i].interface[j].altsetting[k].iInterface,
(char *) buf,
1024);
if (ret < 3)
continue;
if (strcmp((char *) buf, "MTP") == 0) {
GP_LOG_D ("Configuration %d, interface %d, altsetting %d:\n", i, j, k);
GP_LOG_D (" Interface description contains the string \"MTP\"\n");
GP_LOG_D (" Device recognized as MTP, no further probing.\n");
goto found;
}
}
}
}
}
/* get string descriptor at 0xEE */
ret = usb_get_descriptor (devh, 0x03, 0xee, buf, sizeof(buf));
if (ret > 0) GP_LOG_DATA (buf, ret, "get_MS_OSD");
if (ret < 10) goto errout;
if (!((buf[2] == 'M') && (buf[4]=='S') && (buf[6]=='F') && (buf[8]=='T')))
goto errout;
cmd = buf[16];
ret = usb_control_msg (devh, USB_ENDPOINT_IN|USB_RECIP_DEVICE|LIBUSB_REQUEST_TYPE_VENDOR, cmd, 0, 4, buf, sizeof(buf), 1000);
if (ret == -1) {
GP_LOG_E ("control message says %d\n", ret);
goto errout;
}
if (buf[0] != 0x28) {
GP_LOG_E ("ret is %d, buf[0] is %x\n", ret, buf[0]);
goto errout;
}
if (ret > 0) GP_LOG_DATA (buf, ret, "get_MS_ExtDesc");
if ((buf[0x12] != 'M') || (buf[0x13] != 'T') || (buf[0x14] != 'P')) {
GP_LOG_E ("buf at 0x12 is %02x%02x%02x\n", buf[0x12], buf[0x13], buf[0x14]);
goto errout;
}
ret = usb_control_msg (devh, USB_ENDPOINT_IN|USB_RECIP_DEVICE|LIBUSB_REQUEST_TYPE_VENDOR, cmd, 0, 5, buf, sizeof(buf), 1000);
if (ret == -1) goto errout;
if (buf[0] != 0x28) {
GP_LOG_E ("ret is %d, buf[0] is %x\n", ret, buf[0]);
goto errout;
}
if (ret > 0) GP_LOG_DATA (buf, ret, "get_MS_ExtProp");
if ((buf[0x12] != 'M') || (buf[0x13] != 'T') || (buf[0x14] != 'P')) {
GP_LOG_E ("buf at 0x12 is %02x%02x%02x\n", buf[0x12], buf[0x13], buf[0x14]);
goto errout;
}
found:
usb_close (devh);
/* Now chose a nice interface for us to use ... Just take the first. */
if (desc.bNumConfigurations > 1)
GP_LOG_E ("The device has %d configurations!\n", desc.bNumConfigurations);
for (i = 0; i < desc.bNumConfigurations; i++) {
struct usb_config_descriptor *config =
&dev->config[i];
if (config->bNumInterfaces > 1)
GP_LOG_E ("The configuration has %d interfaces!\n", config->bNumInterfaces);
for (i1 = 0; i1 < config->bNumInterfaces; i1++) {
struct usb_interface *interface =
&config->interface[i1];
if (interface->num_altsetting > 1)
GP_LOG_E ("The interface has %d altsettings!\n", interface->num_altsetting);
for (i2 = 0; i2 < interface->num_altsetting; i2++) {
*configno = i;
*interfaceno = i1;
*altsettingno = i2;
return 1;
}
}
}
return 1;
errout:
usb_close (devh);
return 0;
#endif
}
/*
* Get the USB config descriptors, cache and parse'em
*
* hub-only!! ... and only in reset path, or usb_new_device()
* (used by real hubs and virtual root hubs)
*
* NOTE: if this is a WUSB device and is not authorized, we skip the
* whole thing. A non-authorized USB device has no
* configurations.
*/
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
int result = 0;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
cfgno = 0;
if (dev->authorized == 0) /* Not really an error */
goto out_not_authorized;
result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
if (ncfg < 1) {
dev_err(ddev, "no configurations\n");
return -EINVAL;
}
length = ncfg * sizeof(struct usb_host_config);
dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
length = ncfg * sizeof(char *);
dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!buffer)
goto err2;
desc = (struct usb_config_descriptor *)buffer;
result = 0;
for (; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
buffer, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s: %d\n", cfgno, "start", result);
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
} else if (result < 4) {
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,
USB_DT_CONFIG_SIZE, result);
result = -EINVAL;
goto err;
}
length = max((int) le16_to_cpu(desc->wTotalLength),
USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
bigbuffer = kmalloc(length, GFP_KERNEL);
if (!bigbuffer) {
result = -ENOMEM;
goto err;
}
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "all");
kfree(bigbuffer);
goto err;
}
if (result < length) {
dev_warn(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
#if defined(__VMKLNX__)
dev->rawdescriptors[cfgno] = (char *)bigbuffer;
#else
dev->rawdescriptors[cfgno] = bigbuffer;
#endif
result = usb_parse_configuration(&dev->dev, cfgno,
&dev->config[cfgno], bigbuffer, length);
if (result < 0) {
++cfgno;
goto err;
}
}
result = 0;
err:
kfree(buffer);
out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
dev_err(ddev, "out of memory\n");
return result;
}
static int probe_device_descriptor(struct usb_device *dev, FILE *dumpfile)
{
usb_dev_handle *devh;
unsigned char buf[1024], cmd;
int i;
int ret;
if (dev->descriptor.bDeviceClass == USB_CLASS_HUB) {
return 0;
}
devh = usb_open(dev);
if (devh == NULL) {
return 0;
}
if (dev->config) {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
uint8_t j;
for (j = 0; j < dev->config[i].bNumInterfaces; j++) {
int k;
for (k = 0; k < dev->config[i].interface[j].num_altsetting; k++) {
struct usb_interface_descriptor *intf =
&dev->config[i].interface[j].altsetting[k];
buf[0] = '\0';
ret = usb_get_string_simple(devh,
dev->config[i].interface[j].altsetting[k].iInterface,
(char *) buf,
1024);
if (ret < 3)
continue;
if (strcmp((char *) buf, "MTP") == 0) {
if (dumpfile != NULL) {
fprintf(dumpfile, "Configuration %d, interface %d, altsetting %d:\n", i, j, k);
fprintf(dumpfile, " Interface description contains the string \"MTP\"\n");
fprintf(dumpfile, " Device recognized as MTP, no further probing.\n");
}
usb_close(devh);
return 1;
}
#ifdef LIBUSB_HAS_GET_DRIVER_NP
{
char devname[0x10];
devname[0] = '\0';
ret = usb_get_driver_np(devh,
dev->config[i].interface[j].altsetting[k].iInterface,
devname,
sizeof(devname));
if (devname[0] != '\0' && strcmp(devname, "usb-storage")) {
printf("avoid probing device using kernel interface \"%s\"\n", devname);
return 0;
}
}
#endif
}
}
}
} else {
if (dev->descriptor.bNumConfigurations)
printf("dev->config is NULL in probe_device_descriptor yet dev->descriptor.bNumConfigurations > 0\n");
}
ret = usb_get_descriptor(devh, 0x03, 0xee, buf, sizeof(buf));
if (dumpfile != NULL && ret > 0) {
fprintf(dumpfile, "Microsoft device descriptor 0xee:\n");
data_dump_ascii(dumpfile, buf, ret, 16);
}
if (ret < 10) {
usb_close(devh);
return 0;
}
if (!((buf[2] == 'M') && (buf[4] == 'S') &&
(buf[6] == 'F') && (buf[8] == 'T'))) {
usb_close(devh);
return 0;
}
cmd = buf[16];
ret = usb_control_msg (devh,
USB_ENDPOINT_IN|USB_RECIP_DEVICE|USB_TYPE_VENDOR,
cmd,
0,
4,
(char *) buf,
sizeof(buf),
USB_TIMEOUT_DEFAULT);
if (dumpfile != NULL && ret > 0) {
fprintf(dumpfile, "Microsoft device response to control message 1, CMD 0x%02x:\n", cmd);
data_dump_ascii(dumpfile, buf, ret, 16);
}
if (ret <= 0x15) {
usb_close(devh);
return 0;
}
if ((buf[0x12] != 'M') || (buf[0x13] != 'T') || (buf[0x14] != 'P')) {
usb_close(devh);
return 0;
}
ret = usb_control_msg (devh,
USB_ENDPOINT_IN|USB_RECIP_DEVICE|USB_TYPE_VENDOR,
cmd,
0,
5,
(char *) buf,
sizeof(buf),
USB_TIMEOUT_DEFAULT);
if (dumpfile != NULL && ret > 0) {
fprintf(dumpfile, "Microsoft device response to control message 2, CMD 0x%02x:\n", cmd);
data_dump_ascii(dumpfile, buf, ret, 16);
}
if (ret == -1) {
fprintf(stderr, "Potential MTP Device with VendorID:%04x and "
"ProductID:%04x encountered an error responding to "
"control message 2.\n"
"Problems may arrise but continuing\n",
dev->descriptor.idVendor, dev->descriptor.idProduct);
} else if (ret <= 0x15) {
fprintf(stderr, "Potential MTP Device with VendorID:%04x and "
"ProductID:%04x responded to control message 2 with a "
"response that was too short. Problems may arrise but "
"continuing\n",
dev->descriptor.idVendor, dev->descriptor.idProduct);
} else if ((buf[0x12] != 'M') || (buf[0x13] != 'T') || (buf[0x14] != 'P')) {
fprintf(stderr, "Potential MTP Device with VendorID:%04x and "
"ProductID:%04x encountered an error responding to "
"control message 2\n"
"Problems may arrise but continuing\n",
dev->descriptor.idVendor, dev->descriptor.idProduct);
}
usb_close(devh);
return 1;
}
/* Get BOS descriptor set */
int usb_get_bos_descriptor(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
struct usb_bos_descriptor *bos;
struct usb_dev_cap_header *cap;
unsigned char *buffer;
int length, total_len, num, i;
int ret;
bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
if (!bos)
return -ENOMEM;
/* Get BOS descriptor */
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
if (ret < USB_DT_BOS_SIZE) {
dev_err(ddev, "unable to get BOS descriptor\n");
if (ret >= 0)
ret = -ENOMSG;
kfree(bos);
return ret;
}
length = bos->bLength;
total_len = le16_to_cpu(bos->wTotalLength);
num = bos->bNumDeviceCaps;
kfree(bos);
if (total_len < length)
return -EINVAL;
dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL);
if (!dev->bos)
return -ENOMEM;
/* Now let's get the whole BOS descriptor set */
buffer = kzalloc(total_len, GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err;
}
dev->bos->desc = (struct usb_bos_descriptor *)buffer;
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
if (ret < total_len) {
dev_err(ddev, "unable to get BOS descriptor set\n");
if (ret >= 0)
ret = -ENOMSG;
goto err;
}
total_len -= length;
for (i = 0; i < num; i++) {
buffer += length;
cap = (struct usb_dev_cap_header *)buffer;
length = cap->bLength;
if (total_len < length)
break;
total_len -= length;
if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
dev_warn(ddev, "descriptor type invalid, skip\n");
continue;
}
switch (cap->bDevCapabilityType) {
case USB_CAP_TYPE_WIRELESS_USB:
/* Wireless USB cap descriptor is handled by wusb */
break;
case USB_CAP_TYPE_EXT:
dev->bos->ext_cap =
(struct usb_ext_cap_descriptor *)buffer;
break;
case USB_SS_CAP_TYPE:
dev->bos->ss_cap =
(struct usb_ss_cap_descriptor *)buffer;
break;
case CONTAINER_ID_TYPE:
dev->bos->ss_id =
(struct usb_ss_container_id_descriptor *)buffer;
break;
default:
break;
}
}
return 0;
err:
usb_release_bos_descriptor(dev);
return ret;
}
/* XXX: exclude high speed devices or implement EHCI */
USBDevice *usb_host_device_open(const char *devname)
{
USBHostDevice *dev;
struct usb_dev_handle *udev = NULL;
struct usb_device *device = NULL;
struct usb_config_descriptor config_desc;
int config_descr_len, nb_interfaces;
int bus_num, addr, interface, ret;
char product_name[32] ;
if ((ret = usb_host_find_device(&bus_num, &addr, devname, &device)) < 0)
return NULL;
if (!device)
return NULL;
udev = usb_open(device);
if (!udev) {
#ifdef DEBUG
printf("couldn't open usb device at %d.%d\n", bus_num, addr);
#endif
return NULL;
}
/* read the 1st config descriptor */
config_descr_len = usb_get_descriptor(udev, 2, 0, &config_desc, sizeof(config_desc));
if (config_descr_len <= 0) {
printf("read config_desc: %s", usb_strerror());
goto fail;
}
if (config_descr_len > sizeof(config_desc)) {
printf("config_desc size mismatch\n");
goto fail;
}
nb_interfaces = config_desc.bNumInterfaces;
usb_set_configuration(udev, config_desc.bConfigurationValue);
for (interface = 0; interface < nb_interfaces; interface++) {
/* might as well */
#ifdef LIBUSB_HAS_DETACH_KERNEL_DRIVER_NP
usb_detach_kernel_driver_np(udev, interface);
#endif
ret = usb_claim_interface(udev, interface);
if (ret < 0) {
printf("usb_claim_interface: %s", usb_strerror());
fail:
if (udev)
usb_close(udev);
return NULL;
}
}
#ifdef DEBUG
printf("host USB device %d.%d grabbed\n", bus_num, addr);
#endif
dev = qemu_mallocz(sizeof(USBHostDevice));
if (!dev)
goto fail;
/* not accurate - might be better off reporting only low/full */
switch (device->descriptor.bcdUSB) {
case 0x0110:
dev->dev.speed = USB_SPEED_FULL;
break;
case 0x0200:
dev->dev.speed = USB_SPEED_HIGH;
break;
case 0x0100:
dev->dev.speed = USB_SPEED_LOW;
break;
default:
dev->dev.speed = USB_SPEED_FULL;
}
dev->udev = udev;
dev->num_interfaces = nb_interfaces;
dev->dev.handle_packet = usb_generic_handle_packet;
dev->dev.handle_reset = usb_host_handle_reset;
dev->dev.handle_control = usb_host_handle_control;
dev->dev.handle_data = usb_host_handle_data;
dev->dev.handle_destroy = usb_host_handle_destroy;
/* get product string if available */
usb_get_string_simple(udev, device->descriptor.iProduct,
product_name, sizeof(product_name));
if (product_name[0] == '\0')
snprintf(dev->dev.devname, sizeof(dev->dev.devname),
"host:%s", devname);
else
pstrcpy(dev->dev.devname, sizeof(dev->dev.devname),
product_name);
return (USBDevice *)dev;
}
int download(AbstractFile* file, unsigned int transfer_size, int final_reset)
{
struct dfu_if _rt_dif, _dif, *dif = &_dif;
int num_devs;
int num_ifs;
enum mode mode = MODE_NONE;
struct dfu_status status;
struct usb_dfu_func_descriptor func_dfu;
char *alt_name = NULL; /* query alt name if non-NULL */
int ret;
printf("dfu-util - (C) 2007 by OpenMoko Inc. Hacked by the iPhone Dev Team\n"
"This program is Free Software and has ABSOLUTELY NO WARRANTY\n\n");
memset(dif, 0, sizeof(*dif));
dif->flags = DFU_IFF_VENDOR | DFU_IFF_PRODUCT;
dif->vendor = 0x05ac;
dif->product = 0x1222;
dif->product_mask = 0xfff0;
usb_init();
//usb_set_debug(255);
usb_find_busses();
usb_find_devices();
mode = MODE_DOWNLOAD;
if (mode == MODE_NONE) {
fprintf(stderr, "You need to specify one of -D or -U\n");
help();
exit(2);
}
if (!file) {
fprintf(stderr, "You need to specify a filename to -D -r -U\n");
help();
exit(2);
}
dfu_init(5000);
num_devs = count_dfu_devices(dif);
if (num_devs == 0) {
fprintf(stderr, "No DFU capable USB device found\n");
exit(1);
} else if (num_devs > 1) {
/* We cannot safely support more than one DFU capable device
* with same vendor/product ID, since during DFU we need to do
* a USB bus reset, after which the target device will get a
* new address */
fprintf(stderr, "More than one DFU capable USB device found, "
"you might try `--list' and then disconnect all but one "
"device\n");
exit(3);
}
if (!get_first_dfu_device(dif))
exit(3);
/* We have exactly one device. It's usb_device is now in dif->dev */
printf("Opening USB Device 0x%04x:0x%04x...\n", dif->vendor, dif->product);
dif->dev_handle = usb_open(dif->dev);
if (!dif->dev_handle) {
fprintf(stderr, "Cannot open device: %s\n", usb_strerror());
exit(1);
}
/* try to find first DFU interface of device */
memcpy(&_rt_dif, dif, sizeof(_rt_dif));
if (!get_first_dfu_if(&_rt_dif))
exit(1);
if (alt_name) {
int n;
n = find_dfu_if(dif->dev, &alt_by_name, alt_name);
if (!n) {
fprintf(stderr, "No such Alternate Setting: \"%s\"\n",
alt_name);
exit(1);
}
if (n < 0) {
fprintf(stderr, "Error %d in name lookup\n", n);
exit(1);
}
dif->altsetting = n-1;
}
print_dfu_if(dif, NULL);
num_ifs = count_dfu_interfaces(dif->dev);
if (num_ifs < 0) {
fprintf(stderr, "No DFU Interface after RESET?!?\n");
exit(1);
} else if (num_ifs == 1) {
if (!get_first_dfu_if(dif)) {
fprintf(stderr, "Can't find the single available DFU IF\n");
exit(1);
}
} else if (num_ifs > 1 && !dif->flags & (DFU_IFF_IFACE|DFU_IFF_ALT)) {
fprintf(stderr, "We have %u DFU Interfaces/Altsettings, "
"you have to specify one via --intf / --alt options\n",
num_ifs);
exit(1);
}
dif->configuration = 1;
printf("Setting Configuration %u...\n", dif->configuration);
if (usb_set_configuration(dif->dev_handle, dif->configuration) < 0) {
fprintf(stderr, "Cannot set configuration: %s\n", usb_strerror());
}
printf("Claiming USB DFU Interface...\n");
if (usb_claim_interface(dif->dev_handle, dif->interface) < 0) {
fprintf(stderr, "Cannot claim interface: %s\n", usb_strerror());
}
printf("Setting Alternate Setting ...\n");
if (usb_set_altinterface(dif->dev_handle, dif->altsetting) < 0) {
fprintf(stderr, "Cannot set alternate interface: %s\n",
usb_strerror());
}
status_again:
printf("Determining device status: ");
if (dfu_get_status(dif->dev_handle, dif->interface, &status ) < 0) {
fprintf(stderr, "error get_status: %s\n", usb_strerror());
exit(1);
}
printf("state = %s, status = %d\n", dfu_state_to_string(status.bState), status.bStatus);
switch (status.bState) {
case DFU_STATE_appIDLE:
case DFU_STATE_appDETACH:
fprintf(stderr, "Device still in Runtime Mode!\n");
exit(1);
break;
case DFU_STATE_dfuERROR:
printf("dfuERROR, clearing status\n");
if (dfu_clear_status(dif->dev_handle, dif->interface) < 0) {
fprintf(stderr, "error clear_status: %s\n", usb_strerror());
exit(1);
}
goto status_again;
break;
case DFU_STATE_dfuDNLOAD_IDLE:
case DFU_STATE_dfuUPLOAD_IDLE:
printf("aborting previous incomplete transfer\n");
if (dfu_abort(dif->dev_handle, dif->interface) < 0) {
fprintf(stderr, "can't send DFU_ABORT: %s\n", usb_strerror());
exit(1);
}
goto status_again;
break;
case DFU_STATE_dfuIDLE:
printf("dfuIDLE, continuing\n");
break;
}
if (!transfer_size) {
/* Obtain DFU functional descriptor */
ret = usb_get_descriptor(dif->dev_handle, 0x21, dif->interface,
&func_dfu, sizeof(func_dfu));
if (ret < 0) {
fprintf(stderr, "Error obtaining DFU functional "
"descriptor: %s\n", usb_strerror());
transfer_size = 0x800;
} else {
func_dfu.wTransferSize = LE2CPU16(func_dfu.wTransferSize);
transfer_size = func_dfu.wTransferSize;
}
}
printf("Transfer Size = 0x%04x\n", transfer_size);
if (DFU_STATUS_OK != status.bStatus ) {
printf("WARNING: DFU Status: '%s'\n",
dfu_status_to_string(status.bStatus));
/* Clear our status & try again. */
dfu_clear_status(dif->dev_handle, dif->interface);
dfu_get_status(dif->dev_handle, dif->interface, &status);
if (DFU_STATUS_OK != status.bStatus) {
fprintf(stderr, "Error: %d\n", status.bStatus);
exit(1);
}
}
switch (mode) {
case MODE_DOWNLOAD:
if (sam7dfu_do_dnload(dif->dev_handle, dif->interface,
transfer_size, file) < 0) {
usb_release_interface(dif->dev_handle, dif->interface);
return 1;
}
break;
default:
fprintf(stderr, "Unsupported mode: %u\n", mode);
exit(1);
}
if (final_reset) {
if (dfu_detach(dif->dev_handle, dif->interface, 1000) < 0) {
fprintf(stderr, "can't detach: %s\n", usb_strerror());
}
printf("Resetting USB to switch back to runtime mode\n");
ret = usb_reset(dif->dev_handle);
if (ret < 0 && ret != -ENODEV) {
fprintf(stderr, "error resetting after download: %s\n",
usb_strerror());
}
}
if(usb_release_interface(dif->dev_handle, dif->interface) < 0) {
fprintf(stderr, "error: releasing %s\n", usb_strerror());
}
if(usb_close(dif->dev_handle) < 0) {
fprintf(stderr, "error: closing %s\n", usb_strerror());
}
return 0;
}
//! This function reads the SETUP request sent to the default control endpoint
//! and calls the appropriate function. When exiting of the usb_read_request
//! function, the device is ready to manage the next request.
//!
//! If the received request is not supported or a non-standard USB request, the function
//! will call the custom decoding function in usb_specific_request module.
//!
//! @note List of supported requests:
//! GET_DESCRIPTOR
//! GET_CONFIGURATION
//! SET_ADDRESS
//! SET_CONFIGURATION
//! CLEAR_FEATURE
//! SET_FEATURE
//! GET_STATUS
//!
void usb_process_request(void)
{
U8 bRequest;
Usb_reset_endpoint_fifo_access(EP_CONTROL);
bmRequestType = Usb_read_endpoint_data(EP_CONTROL, 8);
bRequest = Usb_read_endpoint_data(EP_CONTROL, 8);
switch (bRequest)
{
case GET_DESCRIPTOR:
if (bmRequestType == 0x80) usb_get_descriptor();
else goto unsupported_request;
break;
case GET_CONFIGURATION:
if (bmRequestType == 0x80) usb_get_configuration();
else goto unsupported_request;
break;
case SET_ADDRESS:
if (bmRequestType == 0x00) usb_set_address();
else goto unsupported_request;
break;
case SET_CONFIGURATION:
if (bmRequestType == 0x00) usb_set_configuration();
else goto unsupported_request;
break;
case CLEAR_FEATURE:
if (bmRequestType <= 0x02) usb_clear_feature();
else goto unsupported_request;
break;
case SET_FEATURE:
if (bmRequestType <= 0x02) usb_set_feature();
else goto unsupported_request;
break;
case GET_STATUS:
if (0x7F < bmRequestType && bmRequestType <= 0x82) usb_get_status();
else goto unsupported_request;
break;
case GET_INTERFACE:
if (bmRequestType == 0x81)
{
if(!usb_get_interface())
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
}
else goto unsupported_request;
break;
case SET_INTERFACE:
if (bmRequestType == 0x01) usb_set_interface();
else goto unsupported_request;
break;
case SET_DESCRIPTOR:
case SYNCH_FRAME:
default: //!< unsupported request => call to user read request
unsupported_request:
if (!usb_user_read_request(bmRequestType, bRequest))
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
break;
}
}
/*
* WARNING - If a driver calls usb_reset_device, you should simulate a
* disconnect() and probe() for other interfaces you doesn't claim. This
* is left up to the driver writer right now. This insures other drivers
* have a chance to re-setup their interface.
*
* Take a look at proc_resetdevice in devio.c for some sample code to
* do this.
*/
int usb_reset_device(struct usb_device *dev)
{
struct usb_device *parent = dev->parent;
struct usb_device_descriptor descriptor;
int i, ret, port = -1;
DBG_HOST_HUB("### >>> Enter hub.c file --> usb_reset_device function \n");
if (!parent) {
err("attempting to reset root hub!");
return -EINVAL;
}
for (i = 0; i < parent->maxchild; i++)
if (parent->children[i] == dev) {
port = i;
break;
}
if (port < 0)
return -ENOENT;
down(&usb_address0_sem);
/* Send a reset to the device */
if (usb_hub_port_reset(parent, port, dev, HUB_SHORT_RESET_TIME)) {
usb_hub_port_disable(parent, port);
up(&usb_address0_sem);
return(-ENODEV);
}
/* Reprogram the Address */
ret = usb_set_address(dev);
if (ret < 0) {
err("USB device not accepting new address (error=%d)", ret);
usb_hub_port_disable(parent, port);
up(&usb_address0_sem);
return ret;
}
/* Let the SET_ADDRESS settle */
wait_ms(10);
up(&usb_address0_sem);
/*
* Now we fetch the configuration descriptors for the device and
* see if anything has changed. If it has, we dump the current
* parsed descriptors and reparse from scratch. Then we leave
* the device alone for the caller to finish setting up.
*
* If nothing changed, we reprogram the configuration and then
* the alternate settings.
*/
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &descriptor,
sizeof(descriptor));
if (ret < 0)
return ret;
le16_to_cpus(&descriptor.bcdUSB);
le16_to_cpus(&descriptor.idVendor);
le16_to_cpus(&descriptor.idProduct);
le16_to_cpus(&descriptor.bcdDevice);
if (memcmp(&dev->descriptor, &descriptor, sizeof(descriptor))) {
usb_destroy_configuration(dev);
ret = usb_get_device_descriptor(dev);
if (ret < sizeof(dev->descriptor)) {
if (ret < 0)
err("unable to get device descriptor (error=%d)", ret);
else
err("USB device descriptor short read (expected %Zi, got %i)", sizeof(dev->descriptor), ret);
clear_bit(dev->devnum, &dev->bus->devmap.devicemap);
dev->devnum = -1;
return -EIO;
}
ret = usb_get_configuration(dev);
if (ret < 0) {
err("unable to get configuration (error=%d)", ret);
usb_destroy_configuration(dev);
clear_bit(dev->devnum, &dev->bus->devmap.devicemap);
dev->devnum = -1;
return 1;
}
dev->actconfig = dev->config;
usb_set_maxpacket(dev);
return 1;
}
ret = usb_set_configuration(dev, dev->actconfig->bConfigurationValue);
if (ret < 0) {
err("failed to set active configuration (error=%d)", ret);
return ret;
}
for (i = 0; i < dev->actconfig->bNumInterfaces; i++) {
struct usb_interface *intf = &dev->actconfig->interface[i];
struct usb_interface_descriptor *as = &intf->altsetting[intf->act_altsetting];
ret = usb_set_interface(dev, as->bInterfaceNumber, as->bAlternateSetting);
if (ret < 0) {
err("failed to set active alternate setting for interface %d (error=%d)", i, ret);
return ret;
}
}
return 0;
}
int main(int argc, char **argv)
{
struct usb_vendprod vendprod;
struct dfu_if _rt_dif, _dif, *dif = &_dif;
int num_devs;
int num_ifs;
unsigned int transfer_size = 0;
enum mode mode = MODE_NONE;
struct dfu_status status;
int quirks_auto_detect = 1;
dfu_quirks manual_quirks;
dfu_handle handle;
char *filename = NULL;
char *alt_name = NULL; /* query alt name if non-NULL */
char *end;
int final_reset = 0;
int page_size = getpagesize();
int ret;
printf("dfu-util - (C) 2007-2008 by OpenMoko Inc.\n"
"This program is Free Software and has ABSOLUTELY NO WARRANTY\n\n");
dfu_quirks_clear(&manual_quirks);
memset(dif, 0, sizeof(*dif));
usb_init();
//usb_set_debug(255);
usb_find_busses();
usb_find_devices();
while (1) {
int c, option_index = 0;
c = getopt_long(argc, argv, "hVvld:p:c:i:a:t:U:D:C:S:RQNq:", opts,
&option_index);
if (c == -1)
break;
switch (c) {
case 'h':
help();
exit(0);
break;
case 'V':
print_version();
exit(0);
break;
case 'v':
verbose = 1;
break;
case 'l':
list_dfu_interfaces();
exit(0);
break;
case 'd':
/* Parse device */
if (parse_vendprod(&vendprod, optarg) < 0) {
fprintf(stderr, "unable to parse `%s'\n", optarg);
exit(2);
}
dif->vendor = vendprod.vendor;
dif->product = vendprod.product;
dif->flags |= (DFU_IFF_VENDOR | DFU_IFF_PRODUCT);
break;
case 'p':
/* Parse device path */
dif->path = optarg;
dif->flags |= DFU_IFF_PATH;
ret = resolve_device_path(dif);
if (ret < 0) {
fprintf(stderr, "unable to parse `%s'\n",
optarg);
exit(2);
}
if (!ret) {
fprintf(stderr, "cannot find `%s'\n", optarg);
exit(1);
}
break;
case 'c':
/* Configuration */
dif->configuration = atoi(optarg);
dif->flags |= DFU_IFF_CONFIG;
break;
case 'i':
/* Interface */
dif->interface = atoi(optarg);
dif->flags |= DFU_IFF_IFACE;
break;
case 'a':
/* Interface Alternate Setting */
dif->altsetting = strtoul(optarg, &end, 0);
if (*end)
alt_name = optarg;
dif->flags |= DFU_IFF_ALT;
break;
case 't':
transfer_size = atoi(optarg);
break;
case 'U':
mode = MODE_UPLOAD;
filename = optarg;
break;
case 'D':
mode = MODE_DOWNLOAD;
filename = optarg;
break;
case 'C':
mode = MODE_COMPARE;
/* TODO: verify firmware */
filename = optarg;
break;
case 'S':
filename = optarg;
add_file_suffix(filename);
exit(0);
break;
case 'R':
final_reset = 1;
break;
case 'Q':
dfu_quirks_print();
exit(0);
break;
case 'N':
quirks_auto_detect = 0;
break;
case 'q':
quirks_auto_detect = 0;
dfu_quirk_set(&manual_quirks, atoi(optarg));
break;
default:
help();
exit(2);
}
}
if (mode == MODE_NONE) {
fprintf(stderr, "You need to specify one of -D or -U\n");
help();
exit(2);
}
if (!filename) {
fprintf(stderr, "You need to specify a filename to -D -r -U\n");
help();
exit(2);
}
dfu_init(&handle, 5000);
num_devs = count_dfu_devices(dif);
if (num_devs == 0) {
fprintf(stderr, "No DFU capable USB device found\n");
exit(1);
} else if (num_devs > 1) {
/* We cannot safely support more than one DFU capable device
* with same vendor/product ID, since during DFU we need to do
* a USB bus reset, after which the target device will get a
* new address */
fprintf(stderr, "More than one DFU capable USB device found, "
"you might try `--list' and then disconnect all but one "
"device\n");
exit(3);
}
if (!get_first_dfu_device(dif))
exit(3);
/* We have exactly one device. It's usb_device is now in dif->dev */
printf("Opening USB Device 0x%04x:0x%04x...\n", dif->vendor, dif->product);
dif->dev_handle = usb_open(dif->dev);
if (!dif->dev_handle) {
fprintf(stderr, "Cannot open device: %s\n", usb_strerror());
exit(1);
}
/* try to find first DFU interface of device */
memcpy(&_rt_dif, dif, sizeof(_rt_dif));
if (!get_first_dfu_if(&_rt_dif))
exit(1);
handle.device = _rt_dif.dev_handle;
handle.interface = _rt_dif.interface;
/* automatic quirk detection */
if(quirks_auto_detect)
{
/* TODO: let the detection be influenced by bcdDFU, bcdDevice */
handle.quirk_flags = dfu_quirks_detect(0, dif->vendor, dif->product, 0);
}
/* merge with manual quirks */
dfu_quirks_insert(&handle.quirk_flags, &manual_quirks);
if(!dfu_quirks_is_empty(&handle.quirk_flags))
{
printf("Selected quirks: ");
dfu_quirks_print_set(&handle.quirk_flags);
printf("\n");
}
if (!_rt_dif.flags & DFU_IFF_DFU) {
/* In the 'first round' during runtime mode, there can only be one
* DFU Interface descriptor according to the DFU Spec. */
/* FIXME: check if the selected device really has only one */
printf("Claiming USB DFU Runtime Interface %d...\n",
_rt_dif.interface);
if (usb_claim_interface(_rt_dif.dev_handle, _rt_dif.interface) < 0) {
fprintf(stderr, "Cannot claim interface: %s\n",
usb_strerror());
exit(1);
}
/* DFU 1.0, Table 4.1: in runtime-mode, alternate
interface setting must be zero. therefore we can
assume, '0' is correct.
the reason we use usb_set_altinterface() here:
switch devices to the interface set using
usb_claim_interface() above - for some reason this
isn't done there. is the only libusb API which
issues the SET_INTERFACE USB standard request is
usb_set_altinterface()
*/
if (usb_set_altinterface(_rt_dif.dev_handle, 0) < 0) {
fprintf(stderr, "Cannot set alternate interface %d: %s\n",
0,
usb_strerror());
exit(1);
}
printf("Determining device state: ");
int state = -1;
if ( (state = dfu_get_state(&handle)) < 0) {
exit(1);
}
printf("state = %s\n", dfu_state_to_string(state));
dfu_sm_set_state_unchecked(&handle, state);
printf("Determining device status: ");
if (dfu_get_status(&handle, &status ) < 0) {
exit(1);
}
printf("state = %s, status = %d = \"%s\"\n",
dfu_state_to_string(status.bState),
status.bStatus,
dfu_status_to_string(status.bStatus) );
switch (status.bState) {
case DFU_STATE_appIDLE:
case DFU_STATE_appDETACH:
printf("Device really in Runtime Mode, send DFU "
"detach request...\n");
if(status.bState == DFU_STATE_appDETACH) {
printf("Device is already in state %s, skipping DFU_DETACH request\n",
dfu_state_to_string(status.bState));
}
else
{
if (dfu_detach(&handle, 1000) < 0) {
exit(1);
break;
}
}
/* handle bitWillDetach (DFU 1.1) */
if(handle.dfu_ver == DFU_VERSION_1_1 &&
handle.func_dfu.bmAttributes & USB_DFU_WILL_DETACH)
{
/* TODO: test this with a real DFU 1.1 device */
printf("Waiting for USB device's own detach (bitWillDetach=1)...\n");
dfu_sm_set_state_checked(&handle,
DFU_STATE_dfuIDLE);
}
else
{
printf("Resetting USB...\n");
ret = dfu_usb_reset(&handle);
if (ret < 0 && ret != -ENODEV)
{
/* do nothing; error msg is output in dfu_usb_reset. */
}
}
sleep(2);
break;
case DFU_STATE_dfuERROR:
printf("dfuERROR, clearing status\n");
if (dfu_clear_status(&handle) < 0) {
exit(1);
break;
}
break;
default:
fprintf(stderr, "WARNING: Runtime device already "
"in DFU state ?!?\n");
goto dfustate;
break;
}
/* now we need to re-scan the bus and locate our device */
if (usb_find_devices() < 2)
printf("not at least 2 device changes found ?!?\n");
if (dif->flags & DFU_IFF_PATH) {
ret = resolve_device_path(dif);
if (ret < 0) {
fprintf(stderr,
"internal error: cannot re-parse `%s'\n",
dif->path);
abort();
}
if (!ret) {
fprintf(stderr,
"Can't resolve path after RESET?\n");
exit(1);
}
}
num_devs = count_dfu_devices(dif);
if (num_devs == 0) {
fprintf(stderr, "Lost device after RESET?\n");
exit(1);
} else if (num_devs > 1) {
fprintf(stderr, "More than one DFU capable USB "
"device found, you might try `--list' and "
"then disconnect all but one device\n");
exit(1);
}
if (!get_first_dfu_device(dif))
exit(3);
printf("Opening USB Device...\n");
dif->dev_handle = usb_open(dif->dev);
if (!dif->dev_handle) {
fprintf(stderr, "Cannot open device: %s\n",
usb_strerror());
exit(1);
}
} else {
/* we're already in DFU mode, so we can skip the detach/reset
* procedure */
}
dfustate:
if (alt_name) {
int n;
n = find_dfu_if(dif->dev, &alt_by_name, alt_name);
if (!n) {
fprintf(stderr, "No such Alternate Setting: \"%s\"\n",
alt_name);
exit(1);
}
if (n < 0) {
fprintf(stderr, "Error %d in name lookup\n", n);
exit(1);
}
dif->altsetting = n-1;
}
print_dfu_if(dif, NULL);
num_ifs = count_dfu_interfaces(dif->dev);
if (num_ifs < 0) {
fprintf(stderr, "No DFU Interface after RESET?!?\n");
exit(1);
} else if (num_ifs == 1) {
if (!get_first_dfu_if(dif)) {
fprintf(stderr, "Can't find the single available "
"DFU IF\n");
exit(1);
}
} else if (num_ifs > 1 && (!dif->flags) & (DFU_IFF_IFACE|DFU_IFF_ALT)) {
fprintf(stderr, "We have %u DFU Interfaces/Altsettings, "
"you have to specify one via --intf / --alt options\n",
num_ifs);
exit(1);
}
#if 0
printf("Setting Configuration %u...\n", dif->configuration);
if (usb_set_configuration(dif->dev_handle, dif->configuration) < 0) {
fprintf(stderr, "Cannot set configuration: %s\n",
usb_strerror());
exit(1);
}
#endif
printf("Claiming USB DFU Interface...\n");
if (usb_claim_interface(dif->dev_handle, dif->interface) < 0) {
fprintf(stderr, "Cannot claim interface: %s\n",
usb_strerror());
exit(1);
}
printf("Setting Alternate Setting ...\n");
if (usb_set_altinterface(dif->dev_handle, dif->altsetting) < 0) {
fprintf(stderr, "Cannot set alternate interface: %s\n",
usb_strerror());
exit(1);
}
/* update the handle to point to the dfu-mode descriptor */
handle.device = dif->dev_handle;
handle.interface = dif->interface;
status_again:
printf("Determining device status: ");
if (dfu_get_status(&handle, &status ) < 0) {
fprintf(stderr, "error get_status: %s\n", usb_strerror());
exit(1);
}
printf("state = %s, status = %d\n",
dfu_state_to_string(status.bState), status.bStatus);
/* force the statemachine into current status */
dfu_sm_set_state_unchecked(&handle, status.bState);
switch (status.bState) {
case DFU_STATE_appIDLE:
case DFU_STATE_appDETACH:
fprintf(stderr, "Device still in Runtime Mode!\n");
exit(1);
break;
case DFU_STATE_dfuERROR:
printf("dfuERROR, clearing status\n");
if (dfu_clear_status(&handle) < 0) {
fprintf(stderr, "error clear_status: %s\n",
usb_strerror());
exit(1);
}
goto status_again;
break;
case DFU_STATE_dfuDNLOAD_IDLE:
case DFU_STATE_dfuUPLOAD_IDLE:
printf("aborting previous incomplete transfer\n");
if (dfu_abort(&handle) < 0) {
fprintf(stderr, "can't send DFU_ABORT: %s\n",
usb_strerror());
exit(1);
}
goto status_again;
break;
case DFU_STATE_dfuIDLE:
printf("dfuIDLE, continuing\n");
break;
}
/* Obtain DFU functional descriptor */
ret = usb_get_descriptor(dif->dev_handle, 0x21, dif->interface,
&(handle.func_dfu), sizeof(handle.func_dfu));
if (ret < 0) {
fprintf(stderr, "Error obtaining DFU functional "
"descriptor: %s\n", usb_strerror());
if(dfu_quirk_is_set(&handle.quirk_flags,
QUIRK_IGNORE_INVALID_FUNCTIONAL_DESCRIPTOR))
{
handle.func_dfu.bmAttributes =
USB_DFU_CAN_DOWNLOAD |
USB_DFU_CAN_UPLOAD |
USB_DFU_MANIFEST_TOL;
handle.func_dfu.wTransferSize = cpu_to_le16(transfer_size);
if(!transfer_size)
transfer_size = page_size;
handle.func_dfu.bcdDFUVersion = USB_DFU_VER_1_0;
fprintf(stderr, " Still, try to continue with default flags/manual settings.\n");
}
else
{
exit(1);
}
}
else
{
transfer_size = le16_to_cpu(handle.func_dfu.wTransferSize);
}
/* why is this limited to page_size, a host-dependent value? (sgiessl) */
if (transfer_size > page_size)
transfer_size = page_size;
/* quirk overwriting DFU version */
if(dfu_quirk_is_set(&handle.quirk_flags, QUIRK_FORCE_DFU_VERSION_1_0))
{
handle.func_dfu.bcdDFUVersion = USB_DFU_VER_1_0;
}
else if(dfu_quirk_is_set(&handle.quirk_flags, QUIRK_FORCE_DFU_VERSION_1_1))
{
handle.func_dfu.bcdDFUVersion = USB_DFU_VER_1_1;
}
/* read DFU version */
switch(handle.func_dfu.bcdDFUVersion)
{
case USB_DFU_VER_1_1:
handle.dfu_ver = DFU_VERSION_1_1;
break;
default:
printf("WARNING: device specifies unknown DFU version 0x%.2x, defaulting to DFU 1.0\n",
handle.func_dfu.bcdDFUVersion);
/* fall through intended */
case USB_DFU_VER_1_0:
handle.dfu_ver = DFU_VERSION_1_0;
break;
}
printf("Transfer Size = 0x%04x\n", transfer_size);
printf("Device functional descriptor: %s\n",
dfu_func_descriptor_to_string(&handle.func_dfu));
if (DFU_STATUS_OK != status.bStatus ) {
printf("WARNING: DFU Status: '%s'\n",
dfu_status_to_string(status.bStatus));
/* Clear our status & try again. */
dfu_clear_status(&handle);
dfu_get_status(&handle, &status);
if (DFU_STATUS_OK != status.bStatus) {
fprintf(stderr, "Error: %d\n", status.bStatus);
exit(1);
}
}
switch (mode) {
case MODE_UPLOAD:
if (sam7dfu_do_upload(&handle,
transfer_size, filename) < 0)
exit(1);
break;
case MODE_DOWNLOAD:
if (sam7dfu_do_dnload(&handle,
transfer_size, filename) < 0)
exit(1);
break;
default:
fprintf(stderr, "Unsupported mode: %u\n", mode);
exit(1);
}
if (final_reset) {
if(dfu_quirk_is_set(&handle.quirk_flags, QUIRK_OPENMOKO_DETACH_BEFORE_FINAL_RESET))
{
/* DFU_DETACH is only allowed in appIDLE, so
this is non-standard (as of DFU 1.0, and
1.1). */
printf("Initiating reset by sending DFU_DETACH (QUIRK_OPENMOKO_DETACH_BEFORE_FINAL_RESET)\n");
if (dfu_detach(&handle, 1000) < 0) {
fprintf(stderr, "can't detach: %s\n", usb_strerror());
}
}
printf("Resetting USB to switch back to runtime mode\n");
ret = usb_reset(dif->dev_handle);
if (ret < 0 && ret != -ENODEV) {
fprintf(stderr, "error resetting after download: %s\n",
usb_strerror());
}
}
exit(0);
}
static int udl_parse_vendor_descriptor(struct drm_device *dev,
struct usb_device *usbdev)
{
struct udl_device *udl = dev->dev_private;
char *desc;
char *buf;
char *desc_end;
u8 total_len = 0;
buf = kzalloc(MAX_VENDOR_DESCRIPTOR_SIZE, GFP_KERNEL);
if (!buf)
return false;
desc = buf;
total_len = usb_get_descriptor(usbdev, 0x5f, /* vendor specific */
0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
if (total_len > 5) {
DRM_INFO("vendor descriptor length:%x data:%11ph\n",
total_len, desc);
if ((desc[0] != total_len) || /* descriptor length */
(desc[1] != 0x5f) || /* vendor descriptor type */
(desc[2] != 0x01) || /* version (2 bytes) */
(desc[3] != 0x00) ||
(desc[4] != total_len - 2)) /* length after type */
goto unrecognized;
desc_end = desc + total_len;
desc += 5; /* the fixed header we've already parsed */
while (desc < desc_end) {
u8 length;
u16 key;
key = le16_to_cpu(*((u16 *) desc));
desc += sizeof(u16);
length = *desc;
desc++;
switch (key) {
case 0x0200: { /* max_area */
u32 max_area;
max_area = le32_to_cpu(*((u32 *)desc));
DRM_DEBUG("DL chip limited to %d pixel modes\n",
max_area);
udl->sku_pixel_limit = max_area;
break;
}
default:
break;
}
desc += length;
}
}
goto success;
unrecognized:
/* allow udlfb to load for now even if firmware unrecognized */
DRM_ERROR("Unrecognized vendor firmware descriptor\n");
success:
kfree(buf);
return true;
}
// hub-only!! ... and only in reset path, or usb_new_device()
// (used by real hubs and virtual root hubs)
int usb_get_configuration(struct usb_device *dev)
{
int result;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
if (dev->descriptor.bNumConfigurations > USB_MAXCONFIG) {
warn("too many configurations");
return -EINVAL;
}
if (dev->descriptor.bNumConfigurations < 1) {
warn("not enough configurations");
return -EINVAL;
}
dev->config = (struct usb_host_config *)
kmalloc(dev->descriptor.bNumConfigurations *
sizeof(struct usb_host_config), GFP_KERNEL);
if (!dev->config) {
err("out of memory");
return -ENOMEM;
}
memset(dev->config, 0, dev->descriptor.bNumConfigurations *
sizeof(struct usb_host_config));
dev->rawdescriptors = (char **)kmalloc(sizeof(char *) *
dev->descriptor.bNumConfigurations, GFP_KERNEL);
if (!dev->rawdescriptors) {
err("out of memory");
return -ENOMEM;
}
buffer = kmalloc(8, GFP_KERNEL);
if (!buffer) {
err("unable to allocate memory for configuration descriptors");
return -ENOMEM;
}
desc = (struct usb_config_descriptor *)buffer;
for (cfgno = 0; cfgno < dev->descriptor.bNumConfigurations; cfgno++) {
/* We grab the first 8 bytes so we know how long the whole */
/* configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 8);
if (result < 8) {
if (result < 0)
err("unable to get descriptor");
else {
err("config descriptor too short (expected %i, got %i)", 8, result);
result = -EINVAL;
}
goto err;
}
/* Get the full buffer */
length = le16_to_cpu(desc->wTotalLength);
bigbuffer = kmalloc(length, GFP_KERNEL);
if (!bigbuffer) {
err("unable to allocate memory for configuration descriptors");
result = -ENOMEM;
goto err;
}
/* Now that we know the length, get the whole thing */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, bigbuffer, length);
if (result < 0) {
err("couldn't get all of config descriptors");
kfree(bigbuffer);
goto err;
}
if (result < length) {
err("config descriptor too short (expected %i, got %i)", length, result);
result = -EINVAL;
kfree(bigbuffer);
goto err;
}
dev->rawdescriptors[cfgno] = bigbuffer;
result = usb_parse_configuration(&dev->config[cfgno], bigbuffer);
if (result > 0)
dbg("descriptor data left");
else if (result < 0) {
result = -EINVAL;
goto err;
}
}
kfree(buffer);
return 0;
err:
kfree(buffer);
dev->descriptor.bNumConfigurations = cfgno;
return result;
}
//! @brief This function reads the SETUP request sent to the default control endpoint
//! and calls the appropriate function. When exiting of the usb_read_request
//! function, the device is ready to manage the next request.
//!
void usb_process_request(void)
{
U8 bmRequestType;
U8 bmRequest;
Usb_ack_control_out();
bmRequestType = Usb_read_byte();
bmRequest = Usb_read_byte();
switch (bmRequest)
{
case SETUP_GET_DESCRIPTOR:
if (USB_SETUP_GET_STAND_DEVICE == bmRequestType)
{
if( usb_get_descriptor() )
return;
}
break;
case SETUP_GET_CONFIGURATION:
if (USB_SETUP_GET_STAND_DEVICE == bmRequestType)
{
usb_get_configuration();
return;
}
break;
case SETUP_SET_ADDRESS:
if (USB_SETUP_SET_STAND_DEVICE == bmRequestType)
{
usb_set_address();
return;
}
break;
case SETUP_SET_CONFIGURATION:
if (USB_SETUP_SET_STAND_DEVICE == bmRequestType)
{
if( usb_set_configuration() )
return;
}
break;
case SETUP_CLEAR_FEATURE:
if (usb_clear_feature(bmRequestType))
return;
break;
case SETUP_SET_FEATURE:
if (usb_set_feature(bmRequestType))
return;
break;
case SETUP_GET_STATUS:
if (usb_get_status(bmRequestType))
return;
break;
case SETUP_GET_INTERFACE:
if (USB_SETUP_GET_STAND_INTERFACE == bmRequestType)
{
if( usb_get_interface() )
return;
}
break;
case SETUP_SET_INTERFACE:
if (bmRequestType == USB_SETUP_SET_STAND_INTERFACE)
{
if( usb_set_interface() )
return;
}
break;
default:
break;
}
// un-supported like standard request => call to user read request
if( !usb_user_read_request(bmRequestType, bmRequest) )
{
// Request unknow in the specific request list from interface
// keep that order (set StallRq/clear RxSetup) or a
// OUT request following the SETUP may be acknowledged
Usb_enable_stall_handshake();
Usb_ack_receive_setup();
endpoint_status[(EP_CONTROL & MSK_EP_DIR)] = 0x01;
}
}
// hub-only!! ... and only in reset path, or usb_new_device()
// (used by real hubs and virtual root hubs)
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
int result = -ENOMEM;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
if (ncfg < 1) {
#if 0
dev_err(ddev, "no configurations\n");
return -EINVAL;
#else
dev_err(ddev, "no configurations, try to get configurations [cfyeh]\n");
ncfg = 1;
#endif
}
length = ncfg * sizeof(struct usb_host_config);
dev->config = kmalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
memset(dev->config, 0, length);
length = ncfg * sizeof(char *);
dev->rawdescriptors = kmalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
memset(dev->rawdescriptors, 0, length);
#ifdef USB_512B_ALIGNMENT
buffer = kmalloc(USB_512B_ALIGNMENT_SIZE, GFP_KERNEL);
#else
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
#endif /* USB_512B_ALIGNMENT */
if (!buffer)
goto err2;
desc = (struct usb_config_descriptor *)buffer;
for (cfgno = 0; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
buffer, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "start");
goto err;
} else if (result < 4) {
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,
USB_DT_CONFIG_SIZE, result);
result = -EINVAL;
goto err;
}
length = max((int) le16_to_cpu(desc->wTotalLength),
USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
#ifdef USB_512B_ALIGNMENT
if(length > USB_512B_ALIGNMENT_SIZE)
bigbuffer = kmalloc(length, GFP_KERNEL);
else
bigbuffer = kmalloc(USB_512B_ALIGNMENT_SIZE, GFP_KERNEL);
#else
bigbuffer = kmalloc(length, GFP_KERNEL);
#endif /* USB_512B_ALIGNMENT */
if (!bigbuffer) {
result = -ENOMEM;
goto err;
}
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "all");
kfree(bigbuffer);
goto err;
}
if (result < length) {
dev_warn(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
dev->rawdescriptors[cfgno] = bigbuffer;
result = usb_parse_configuration(&dev->dev, cfgno,
&dev->config[cfgno], bigbuffer, length);
if (result < 0) {
++cfgno;
goto err;
}
}
result = 0;
err:
kfree(buffer);
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
dev_err(ddev, "out of memory\n");
return result;
}
static int udl_parse_vendor_descriptor(struct drm_device *dev,
struct usb_device *usbdev)
{
struct udl_device *udl = dev->dev_private;
char *desc;
char *buf;
char *desc_end;
u8 total_len = 0;
buf = kzalloc(MAX_VENDOR_DESCRIPTOR_SIZE, GFP_KERNEL);
if (!buf)
return false;
desc = buf;
total_len = usb_get_descriptor(usbdev, 0x5f,
0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
if (total_len > 5) {
DRM_INFO("vendor descriptor length:%x data:%02x %02x %02x %02x" \
"%02x %02x %02x %02x %02x %02x %02x\n",
total_len, desc[0],
desc[1], desc[2], desc[3], desc[4], desc[5], desc[6],
desc[7], desc[8], desc[9], desc[10]);
if ((desc[0] != total_len) ||
(desc[1] != 0x5f) ||
(desc[2] != 0x01) ||
(desc[3] != 0x00) ||
(desc[4] != total_len - 2))
goto unrecognized;
desc_end = desc + total_len;
desc += 5;
while (desc < desc_end) {
u8 length;
u16 key;
key = *((u16 *) desc);
desc += sizeof(u16);
length = *desc;
desc++;
switch (key) {
case 0x0200: {
u32 max_area;
max_area = le32_to_cpu(*((u32 *)desc));
DRM_DEBUG("DL chip limited to %d pixel modes\n",
max_area);
udl->sku_pixel_limit = max_area;
break;
}
default:
break;
}
desc += length;
}
}
goto success;
unrecognized:
DRM_ERROR("Unrecognized vendor firmware descriptor\n");
success:
kfree(buf);
return true;
}
/* FIXME: prototype for adding security */
int wusb_dev_sec_add(struct wusbhc *wusbhc,
struct usb_device *usb_dev, struct wusb_dev *wusb_dev)
{
int result, bytes, secd_size;
struct device *dev = &usb_dev->dev;
struct usb_security_descriptor *secd;
const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
const void *itr, *top;
char buf[64];
secd = kmalloc(sizeof(*secd), GFP_KERNEL);
if (secd == NULL) {
result = -ENOMEM;
goto out;
}
result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
0, secd, sizeof(*secd));
if (result < sizeof(*secd)) {
dev_err(dev, "Can't read security descriptor or "
"not enough data: %d\n", result);
goto out;
}
secd_size = le16_to_cpu(secd->wTotalLength);
secd = krealloc(secd, secd_size, GFP_KERNEL);
if (secd == NULL) {
dev_err(dev, "Can't allocate space for security descriptors\n");
goto out;
}
result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
0, secd, secd_size);
if (result < secd_size) {
dev_err(dev, "Can't read security descriptor or "
"not enough data: %d\n", result);
goto out;
}
bytes = 0;
itr = &secd[1];
top = (void *)secd + result;
while (itr < top) {
etd = itr;
if (top - itr < sizeof(*etd)) {
dev_err(dev, "BUG: bad device security descriptor; "
"not enough data (%zu vs %zu bytes left)\n",
top - itr, sizeof(*etd));
break;
}
if (etd->bLength < sizeof(*etd)) {
dev_err(dev, "BUG: bad device encryption descriptor; "
"descriptor is too short "
"(%u vs %zu needed)\n",
etd->bLength, sizeof(*etd));
break;
}
itr += etd->bLength;
bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
"%s (0x%02x/%02x) ",
wusb_et_name(etd->bEncryptionType),
etd->bEncryptionValue, etd->bAuthKeyIndex);
if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1)
ccm1_etd = etd;
}
/* This code only supports CCM1 as of now. */
/* FIXME: user has to choose which sec mode to use?
* In theory we want CCM */
if (ccm1_etd == NULL) {
dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
"can't use!\n");
result = -EINVAL;
goto out;
}
wusb_dev->ccm1_etd = *ccm1_etd;
dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
buf, wusb_et_name(ccm1_etd->bEncryptionType),
ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
result = 0;
out:
kfree(secd);
return result;
}
//! usb_process_request.
//!
//! @brief This function reads the SETUP request sent to the default control endpoint
//! and calls the appropriate function. When exiting of the usb_read_request
//! function, the device is ready to manage the next request.
//!
//! @param none
//!
//! @return none
//! @note list of supported requests:
//! GET_DESCRIPTOR
//! GET_CONFIGURATION
//! SET_ADDRESS
//! SET_CONFIGURATION
//! CLEAR_FEATURE
//! SET_FEATURE
//! GET_STATUS
//!
void usb_process_request(void)
{
U8 bmRequest;
bmRequestType = Usb_read_byte();
bmRequest = Usb_read_byte();
switch (bmRequest)
{
case GET_DESCRIPTOR:
if (0x80 == bmRequestType) { usb_get_descriptor(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case GET_CONFIGURATION:
if (0x80 == bmRequestType) { usb_get_configuration(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case SET_ADDRESS:
if (0x00 == bmRequestType) { usb_set_address(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case SET_CONFIGURATION:
if (0x00 == bmRequestType) { usb_set_configuration(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case CLEAR_FEATURE:
if (0x02 >= bmRequestType) { usb_clear_feature(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case SET_FEATURE:
if (0x02 >= bmRequestType) { usb_set_feature(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case GET_STATUS:
if ((0x7F < bmRequestType) & (0x82 >= bmRequestType))
{ usb_get_status(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case GET_INTERFACE:
if (bmRequestType == 0x81) { usb_get_interface(); }
else { usb_user_read_request(bmRequestType, bmRequest); }
break;
case SET_INTERFACE:
if (bmRequestType == 0x01) {usb_set_interface();}
break;
case SET_DESCRIPTOR:
case SYNCH_FRAME:
default: //!< un-supported request => call to user read request
if(usb_user_read_request(bmRequestType, bmRequest) == FALSE)
{
Usb_enable_stall_handshake();
Usb_ack_receive_setup();
return;
}
break;
}
}
int main(int argc, char **argv) {
int ret, vendor, product;
struct usb_device *dev;
char buf[65535], *endptr;
#if 0
usb_urb *isourb;
struct timeval isotv;
char isobuf[32768];
#endif
usb_init();
// usb_set_debug(255);
usb_find_busses();
usb_find_devices();
/*
if (argc!=3) {
printf("usage: %s vendorID productID\n", argv[0]);
printf("ID numbers of currently attached devices:\n");
list_devices();
exit(1);
}
vendor = strtol(argv[1], &endptr, 16);
if (*endptr != '\0') {
printf("invalid vendor id\n");
exit(1);
}
product = strtol(argv[2], &endptr, 16);
if (*endptr != '\0') {
printf("invalid product id\n");
exit(1);
}
*/
printf("Hladam HUAWEI E220 a prepnem na modem - bbo 06\n");
vendor = 0x12d1;
product = 0x1003;
dev = find_device(vendor, product);
assert(dev);
devh = usb_open(dev);
assert(devh);
signal(SIGTERM, release_usb_device);
/*
ret = usb_get_driver_np(devh, 0, buf, sizeof(buf));
printf("usb_get_driver_np returned %d\n", ret);
if (ret == 0) {
printf("interface 0 already claimed by driver \"%s\", attempting to detach it\n", buf);
ret = usb_detach_kernel_driver_np(devh, 0);
printf("usb_detach_kernel_driver_np returned %d\n", ret);
}
ret = usb_claim_interface(devh, 0);
if (ret != 0) {
printf("claim failed with error %d\n", ret);
exit(1);
}
ret = usb_set_altinterface(devh, 0);
assert(ret >= 0);
*/
// BBO typ 1 = DEVICE
ret = usb_get_descriptor(devh, 0x0000001, 0x0000000, buf, 0x0000012);
//printf("1 get descriptor returned %d, bytes: ", ret);
//print_bytes(buf, ret);
//printf("\n");
usleep(1*1000);
// BBO typ 2 = CONFIGURATION
ret = usb_get_descriptor(devh, 0x0000002, 0x0000000, buf, 0x0000009);
//printf("2 get descriptor returned %d, bytes: ", ret);
//print_bytes(buf, ret);
//printf("\n");
usleep(1*1000);
// BBO typ 2 = CONFIGURATION
ret = usb_get_descriptor(devh, 0x0000002, 0x0000000, buf, 0x0000020);
//printf("3 get descriptor returned %d, bytes: ", ret);
//print_bytes(buf, ret);
//printf("\n");
usleep(1*1000);
/*
ret = usb_release_interface(devh, 0);
if (ret != 0) printf("failed to release interface before set_configuration: %d\n", ret);
ret = usb_set_configuration(devh, 0x0000001);
printf("4 set configuration returned %d\n", ret);
ret = usb_claim_interface(devh, 0);
if (ret != 0) printf("claim after set_configuration failed with error %d\n", ret);
ret = usb_set_altinterface(devh, 0);
printf("4 set alternate setting returned %d\n", ret);
usleep(50*1000);
ret = usb_set_altinterface(devh, 0);
printf("5 set alternate setting returned %d\n", ret);
usleep(62*1000);
*/
ret = usb_control_msg(devh, USB_TYPE_STANDARD + USB_RECIP_DEVICE, USB_REQ_SET_FEATURE, 00000001, 0, buf, 0, 1000);
printf("4 set feature request returned %d\n", ret);
/*
ret = usb_release_interface(devh, 0);
assert(ret == 0);
*/
ret = usb_close(devh);
assert(ret == 0);
printf("Prepnute-OK, Mas ttyUSB0 ttyUSB1 (cez usbserial vendor=0x12d1 product=0x1004)\n");
printf("pozri /proc/bus/usb/devices\n");
return 0;
}
static int ch9_postconfig(struct usbtest_dev *dev)
{
struct usb_interface *iface = dev->intf;
struct usb_device *udev = interface_to_usbdev(iface);
int i, alt, retval;
for (i = 0; i < iface->num_altsetting; i++) {
alt = iface->altsetting[i].desc.bAlternateSetting;
if (alt < 0 || alt >= iface->num_altsetting) {
dev_err(&iface->dev,
"invalid alt [%d].bAltSetting = %d\n",
i, alt);
}
if (realworld && iface->num_altsetting == 1)
continue;
retval = set_altsetting(dev, alt);
if (retval) {
dev_err(&iface->dev, "can't set_interface = %d, %d\n",
alt, retval);
return retval;
}
retval = get_altsetting(dev);
if (retval != alt) {
dev_err(&iface->dev, "get alt should be %d, was %d\n",
alt, retval);
return (retval < 0) ? retval : -EDOM;
}
}
if (!realworld || udev->descriptor.bNumConfigurations != 1) {
int expected = udev->actconfig->desc.bConfigurationValue;
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
USB_REQ_GET_CONFIGURATION,
USB_DIR_IN | USB_RECIP_DEVICE,
0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
if (retval != 1 || dev->buf[0] != expected) {
dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
retval, dev->buf[0], expected);
return (retval < 0) ? retval : -EDOM;
}
}
retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0,
dev->buf, sizeof udev->descriptor);
if (retval != sizeof udev->descriptor) {
dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
retval = usb_get_descriptor(udev, USB_DT_CONFIG, i,
dev->buf, TBUF_SIZE);
if (!is_good_config(dev, retval)) {
dev_err(&iface->dev,
"config [%d] descriptor --> %d\n",
i, retval);
return (retval < 0) ? retval : -EDOM;
}
}
if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) {
struct usb_qualifier_descriptor *d = NULL;
retval = usb_get_descriptor(udev,
USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
sizeof(struct usb_qualifier_descriptor));
if (retval == -EPIPE) {
if (udev->speed == USB_SPEED_HIGH) {
dev_err(&iface->dev,
"hs dev qualifier --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
}
} else if (retval != sizeof(struct usb_qualifier_descriptor)) {
dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
} else
d = (struct usb_qualifier_descriptor *) dev->buf;
if (d) {
unsigned max = d->bNumConfigurations;
for (i = 0; i < max; i++) {
retval = usb_get_descriptor(udev,
USB_DT_OTHER_SPEED_CONFIG, i,
dev->buf, TBUF_SIZE);
if (!is_good_config(dev, retval)) {
dev_err(&iface->dev,
"other speed config --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
}
}
}
}
retval = usb_get_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
if (retval != 2) {
dev_err(&iface->dev, "get dev status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
retval = usb_get_status(udev, USB_RECIP_INTERFACE,
iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
if (retval != 2) {
dev_err(&iface->dev, "get interface status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
return 0;
}
