/**
* virConnectListAllNetworks:
* @conn: Pointer to the hypervisor connection.
* @nets: Pointer to a variable to store the array containing the network
* objects or NULL if the list is not required (just returns number
* of networks).
* @flags: bitwise-OR of virConnectListAllNetworksFlags.
*
* Collect the list of networks, and allocate an array to store those
* objects. This API solves the race inherent between virConnectListNetworks
* and virConnectListDefinedNetworks.
*
* Normally, all networks are returned; however, @flags can be used to
* filter the results for a smaller list of targeted networks. The valid
* flags are divided into groups, where each group contains bits that
* describe mutually exclusive attributes of a network, and where all bits
* within a group describe all possible networks.
*
* The first group of @flags is VIR_CONNECT_LIST_NETWORKS_ACTIVE (up) and
* VIR_CONNECT_LIST_NETWORKS_INACTIVE (down) to filter the networks by state.
*
* The second group of @flags is VIR_CONNECT_LIST_NETWORKS_PERSISTENT (defined)
* and VIR_CONNECT_LIST_NETWORKS_TRANSIENT (running but not defined), to filter
* the networks by whether they have persistent config or not.
*
* The third group of @flags is VIR_CONNECT_LIST_NETWORKS_AUTOSTART
* and VIR_CONNECT_LIST_NETWORKS_NO_AUTOSTART, to filter the networks by
* whether they are marked as autostart or not.
*
* Returns the number of networks found or -1 and sets @nets to NULL in case
* of error. On success, the array stored into @nets is guaranteed to have an
* extra allocated element set to NULL but not included in the return count,
* to make iteration easier. The caller is responsible for calling
* virNetworkFree() on each array element, then calling free() on @nets.
*/
int
virConnectListAllNetworks(virConnectPtr conn,
virNetworkPtr **nets,
unsigned int flags)
{
VIR_DEBUG("conn=%p, nets=%p, flags=0x%x", conn, nets, flags);
virResetLastError();
if (nets)
*nets = NULL;
virCheckConnectReturn(conn, -1);
if (conn->networkDriver &&
conn->networkDriver->connectListAllNetworks) {
int ret;
ret = conn->networkDriver->connectListAllNetworks(conn, nets, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virDomainSnapshotLookupByName:
* @domain: a domain object
* @name: name for the domain snapshot
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Try to lookup a domain snapshot based on its name.
*
* Returns a domain snapshot object or NULL in case of failure. If the
* domain snapshot cannot be found, then the VIR_ERR_NO_DOMAIN_SNAPSHOT
* error is raised.
*/
virDomainSnapshotPtr
virDomainSnapshotLookupByName(virDomainPtr domain,
const char *name,
unsigned int flags)
{
virConnectPtr conn;
VIR_DOMAIN_DEBUG(domain, "name=%s, flags=0x%x", name, flags);
virResetLastError();
virCheckDomainReturn(domain, NULL);
conn = domain->conn;
virCheckNonNullArgGoto(name, error);
if (conn->driver->domainSnapshotLookupByName) {
virDomainSnapshotPtr dom;
dom = conn->driver->domainSnapshotLookupByName(domain, name, flags);
if (!dom)
goto error;
return dom;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virDomainSnapshotGetParent:
* @snapshot: a snapshot object
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Get the parent snapshot for @snapshot, if any.
*
* virDomainSnapshotFree should be used to free the resources after the
* snapshot object is no longer needed.
*
* Returns a domain snapshot object or NULL in case of failure. If the
* given snapshot is a root (no parent), then the VIR_ERR_NO_DOMAIN_SNAPSHOT
* error is raised.
*/
virDomainSnapshotPtr
virDomainSnapshotGetParent(virDomainSnapshotPtr snapshot,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, flags=0x%x", snapshot, flags);
virResetLastError();
virCheckDomainSnapshotReturn(snapshot, NULL);
conn = snapshot->domain->conn;
if (conn->driver->domainSnapshotGetParent) {
virDomainSnapshotPtr snap;
snap = conn->driver->domainSnapshotGetParent(snapshot, flags);
if (!snap)
goto error;
return snap;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virDomainSnapshotGetXMLDesc:
* @snapshot: a domain snapshot object
* @flags: bitwise-OR of supported virDomainSnapshotXMLFlags
*
* Provide an XML description of the domain snapshot, with a top-level
* element of <domainsnapshot>.
*
* No security-sensitive data will be included unless @flags contains
* VIR_DOMAIN_SNAPSHOT_XML_SECURE; this flag is rejected on read-only
* connections.
*
* Returns a 0 terminated UTF-8 encoded XML instance or NULL in case
* of error. The caller must free() the returned value.
*/
char *
virDomainSnapshotGetXMLDesc(virDomainSnapshotPtr snapshot,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, flags=0x%x", snapshot, flags);
virResetLastError();
virCheckDomainSnapshotReturn(snapshot, NULL);
conn = snapshot->domain->conn;
if ((conn->flags & VIR_CONNECT_RO) &&
(flags & VIR_DOMAIN_SNAPSHOT_XML_SECURE)) {
virReportError(VIR_ERR_OPERATION_DENIED, "%s",
_("virDomainSnapshotGetXMLDesc with secure flag"));
goto error;
}
if (conn->driver->domainSnapshotGetXMLDesc) {
char *ret;
ret = conn->driver->domainSnapshotGetXMLDesc(snapshot, flags);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virDomainSnapshotListChildrenNames:
* @snapshot: a domain snapshot object
* @names: array to collect the list of names of snapshots
* @nameslen: size of @names
* @flags: bitwise-OR of supported virDomainSnapshotListFlags
*
* Collect the list of domain snapshots that are children of the given
* snapshot, and store their names in @names. The value to use for
* @nameslen can be determined by virDomainSnapshotNumChildren() with
* the same @flags.
*
* If @flags lacks VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS or contains
* VIR_DOMAIN_SNAPSHOT_LIST_TOPOLOGICAL, and no other connection is
* modifying snapshots, then it is guaranteed that for any snapshot in
* the resulting list, no snapshots later in the list can be reached
* by a sequence of virDomainSnapshotGetParent() starting from that
* earlier snapshot; otherwise, the order of snapshots in the
* resulting list is unspecified.
*
* By default, this command covers only direct children. It is also
* possible to expand things to cover all descendants, when @flags
* includes VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS. Additional filters
* are provided via the same @flags values as documented in
* virDomainSnapshotListAllChildren().
*
* Note that this command is inherently racy: another connection can
* define a new snapshot between a call to virDomainSnapshotNumChildren()
* and this call. You are only guaranteed that all currently defined
* snapshots were listed if the return is less than @nameslen. Likewise,
* you should be prepared for virDomainSnapshotLookupByName() to fail when
* converting a name from this call into a snapshot object, if another
* connection deletes the snapshot in the meantime. For more control over
* the results, see virDomainSnapshotListAllChildren().
*
* Returns the number of domain snapshots found or -1 in case of error.
* The caller is responsible to call free() for each member of the array.
*/
int
virDomainSnapshotListChildrenNames(virDomainSnapshotPtr snapshot,
char **names, int nameslen,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, names=%p, nameslen=%d, flags=0x%x",
snapshot, names, nameslen, flags);
virResetLastError();
virCheckDomainSnapshotReturn(snapshot, -1);
conn = snapshot->domain->conn;
virCheckNonNullArgGoto(names, error);
virCheckNonNegativeArgGoto(nameslen, error);
if (conn->driver->domainSnapshotListChildrenNames) {
int ret = conn->driver->domainSnapshotListChildrenNames(snapshot,
names,
nameslen,
flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virDomainQemuAgentCommand:
* @domain: a domain object
* @cmd: the guest agent command string
* @timeout: timeout seconds
* @flags: execution flags
*
* Execute an arbitrary Guest Agent command.
*
* Issue @cmd to the guest agent running in @domain.
* @timeout must be -2, -1, 0 or positive.
* VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK(-2): meaning to block forever waiting for
* a result.
* VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT(-1): use default timeout value.
* VIR_DOMAIN_QEMU_AGENT_COMMAND_NOWAIT(0): does not wait.
* positive value: wait for @timeout seconds
*
* Returns strings if success, NULL in failure.
*/
char *
virDomainQemuAgentCommand(virDomainPtr domain,
const char *cmd,
int timeout,
unsigned int flags)
{
virConnectPtr conn;
char *ret;
VIR_DOMAIN_DEBUG(domain, "cmd=%s, timeout=%d, flags=%x",
cmd, timeout, flags);
virResetLastError();
virCheckDomainReturn(domain, NULL);
conn = domain->conn;
virCheckReadOnlyGoto(conn->flags, error);
if (conn->driver->domainQemuAgentCommand) {
ret = conn->driver->domainQemuAgentCommand(domain, cmd,
timeout, flags);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
static int
testLogParseFilters(const void *opaque)
{
int ret = -1;
int nfilters;
const struct testLogData *data = opaque;
nfilters = virLogParseFilters(data->str);
if (nfilters < 0) {
if (!data->pass) {
VIR_TEST_DEBUG("Got expected error: %s\n",
virGetLastErrorMessage());
virResetLastError();
ret = 0;
goto cleanup;
}
} else if (nfilters != data->count) {
VIR_TEST_DEBUG("Expected number of parsed outputs is %d, "
"but got %d\n", data->count, nfilters);
goto cleanup;
} else if (!data->pass) {
VIR_TEST_DEBUG("Test should have failed\n");
goto cleanup;
}
ret = 0;
cleanup:
virLogReset();
return ret;
}
/**
* virAdmServerGetThreadPoolParameters:
* @srv: a valid server object reference
* @params: pointer to a list of typed parameters which will be allocated
* to store all returned parameters
* @nparams: pointer which will hold the number of params returned in @params
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Retrieves threadpool parameters from @srv. Upon successful completion,
* @params will be allocated automatically to hold all returned data, setting
* @nparams accordingly.
* When extracting parameters from @params, following search keys are
* supported:
* VIR_THREADPOOL_WORKERS_MIN
* VIR_THREADPOOL_WORKERS_MAX
* VIR_THREADPOOL_WORKERS_PRIORITY
* VIR_THREADPOOL_WORKERS_FREE
* VIR_THREADPOOL_WORKERS_CURRENT
*
* Returns 0 on success, -1 in case of an error.
*/
int
virAdmServerGetThreadPoolParameters(virAdmServerPtr srv,
virTypedParameterPtr *params,
int *nparams,
unsigned int flags)
{
int ret = -1;
VIR_DEBUG("srv=%p, params=%p, nparams=%p, flags=%x",
srv, params, nparams, flags);
virResetLastError();
virCheckAdmServerReturn(srv, -1);
virCheckNonNullArgGoto(params, error);
if ((ret = remoteAdminServerGetThreadPoolParameters(srv, params, nparams,
flags)) < 0)
goto error;
return ret;
error:
virDispatchError(NULL);
return -1;
}
/**
* virConnectListAllNodeDevices:
* @conn: Pointer to the hypervisor connection.
* @devices: Pointer to a variable to store the array containing the node
* device objects or NULL if the list is not required (just returns
* number of node devices).
* @flags: bitwise-OR of virConnectListAllNodeDevices.
*
* Collect the list of node devices, and allocate an array to store those
* objects.
*
* Normally, all node devices are returned; however, @flags can be used to
* filter the results for a smaller list of targeted node devices. The valid
* flags are divided into groups, where each group contains bits that
* describe mutually exclusive attributes of a node device, and where all bits
* within a group describe all possible node devices.
*
* Only one group of the @flags is provided to filter the node devices by
* capability type, flags include:
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_SYSTEM
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_PCI_DEV
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_USB_DEV
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_USB_INTERFACE
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_NET
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_HOST
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_TARGET
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_STORAGE
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS
* VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_GENERIC
*
* Returns the number of node devices found or -1 and sets @devices to NULL in
* case of error. On success, the array stored into @devices is guaranteed to
* have an extra allocated element set to NULL but not included in the return
* count, to make iteration easier. The caller is responsible for calling
* virNodeDeviceFree() on each array element, then calling free() on
* @devices.
*/
int
virConnectListAllNodeDevices(virConnectPtr conn,
virNodeDevicePtr **devices,
unsigned int flags)
{
VIR_DEBUG("conn=%p, devices=%p, flags=%x", conn, devices, flags);
virResetLastError();
if (devices)
*devices = NULL;
virCheckConnectReturn(conn, -1);
if (conn->nodeDeviceDriver &&
conn->nodeDeviceDriver->connectListAllNodeDevices) {
int ret;
ret = conn->nodeDeviceDriver->connectListAllNodeDevices(conn, devices, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
static void virLXCProcessMonitorInitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED,
pid_t initpid,
virDomainObjPtr vm)
{
virLXCDriverPtr driver = lxc_driver;
virLXCDomainObjPrivatePtr priv;
virLXCDriverConfigPtr cfg = virLXCDriverGetConfig(driver);
ino_t inode;
virObjectLock(vm);
priv = vm->privateData;
priv->initpid = initpid;
if (virLXCProcessGetNsInode(initpid, "pid", &inode) < 0) {
virErrorPtr err = virGetLastError();
VIR_WARN("Cannot obtain pid NS inode for %llu: %s",
(unsigned long long)initpid,
err && err->message ? err->message : "<unknown>");
virResetLastError();
inode = 0;
}
virDomainAuditInit(vm, initpid, inode);
if (virDomainSaveStatus(lxc_driver->xmlopt, cfg->stateDir, vm) < 0)
VIR_WARN("Cannot update XML with PID for LXC %s", vm->def->name);
virObjectUnlock(vm);
virObjectUnref(cfg);
}
/**
* virAdmServerSetClientLimits:
* @srv: a valid server object reference
* @params: pointer to client limits object
* @nparams: number of parameters in @params
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Change client limits configuration on server @srv.
*
* Caller is responsible for allocating @params prior to calling this function.
* See 'Manage per-server client limits' in libvirt-admin.h for
* supported parameters in @params.
*
* Returns 0 if the limits have been changed successfully or -1 in case of an
* error.
*/
int
virAdmServerSetClientLimits(virAdmServerPtr srv,
virTypedParameterPtr params,
int nparams,
unsigned int flags)
{
int ret = -1;
VIR_DEBUG("srv=%p, params=%p, nparams=%d, flags=%x", srv, params, nparams,
flags);
VIR_TYPED_PARAMS_DEBUG(params, nparams);
virResetLastError();
virCheckAdmServerGoto(srv, error);
virCheckNonNullArgGoto(params, error);
virCheckNonNegativeArgGoto(nparams, error);
if ((ret = remoteAdminServerSetClientLimits(srv, params, nparams,
flags)) < 0)
goto error;
return ret;
error:
virDispatchError(NULL);
return ret;
}
/**
* virDomainLxcOpenNamespace:
* @domain: a domain object
* @fdlist: pointer to an array to be filled with FDs
* @flags: currently unused, pass 0
*
* This API is LXC specific, so it will only work with hypervisor
* connections to the LXC driver.
*
* Open the namespaces associated with the container @domain.
* The @fdlist array will be allocated to a suitable size,
* and filled with file descriptors for the namespaces. It
* is the caller's responsibility to close the file descriptors
*
* The returned file descriptors are intended to be used with
* the setns() system call.
*
* Returns the number of opened file descriptors, or -1 on error
*/
int
virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags)
{
virConnectPtr conn;
VIR_DOMAIN_DEBUG(domain, "fdlist=%p flags=%x", fdlist, flags);
virResetLastError();
virCheckDomainReturn(domain, -1);
conn = domain->conn;
virCheckNonNullArgGoto(fdlist, error);
virCheckReadOnlyGoto(conn->flags, error);
if (conn->driver->domainLxcOpenNamespace) {
int ret;
ret = conn->driver->domainLxcOpenNamespace(domain,
fdlist,
flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
static int
qemuSetupDiskPathAllow(virDomainDiskDefPtr disk,
const char *path,
size_t depth ATTRIBUTE_UNUSED,
void *opaque)
{
virDomainObjPtr vm = opaque;
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret;
VIR_DEBUG("Process path %s for disk", path);
ret = virCgroupAllowDevicePath(priv->cgroup, path,
(disk->readonly ? VIR_CGROUP_DEVICE_READ
: VIR_CGROUP_DEVICE_RW));
virDomainAuditCgroupPath(vm, priv->cgroup, "allow", path,
disk->readonly ? "r" : "rw", ret == 0);
/* Get this for root squash NFS */
if (ret < 0 &&
virLastErrorIsSystemErrno(EACCES)) {
VIR_DEBUG("Ignoring EACCES for %s", path);
virResetLastError();
ret = 0;
}
return ret;
}
/**
* virNetworkSetAutostart:
* @network: a network object
* @autostart: whether the network should be automatically started 0 or 1
*
* Configure the network to be automatically started
* when the host machine boots.
*
* Returns -1 in case of error, 0 in case of success
*/
int
virNetworkSetAutostart(virNetworkPtr network,
int autostart)
{
virConnectPtr conn;
VIR_DEBUG("network=%p, autostart=%d", network, autostart);
virResetLastError();
virCheckNetworkReturn(network, -1);
conn = network->conn;
virCheckReadOnlyGoto(conn->flags, error);
if (conn->networkDriver && conn->networkDriver->networkSetAutostart) {
int ret;
ret = conn->networkDriver->networkSetAutostart(network, autostart);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(network->conn);
return -1;
}
static void
virStorageBackendFileSystemNetFindNFSPoolSources(virNetfsDiscoverState *state)
{
/*
* # showmount --no-headers -e HOSTNAME
* /tmp *
* /A dir demo1.foo.bar,demo2.foo.bar
*
* Extract directory name (including possible interior spaces ...).
*/
const char *regexes[] = {
"^(/.*\\S) +\\S+$"
};
int vars[] = {
1
};
virCommandPtr cmd = NULL;
cmd = virCommandNewArgList(SHOWMOUNT,
"--no-headers",
"--exports",
state->host,
NULL);
if (virCommandRunRegex(cmd, 1, regexes, vars,
virStorageBackendFileSystemNetFindPoolSourcesFunc,
&state, NULL) < 0)
virResetLastError();
virCommandFree(cmd);
}
/**
* virNodeListDevices:
* @conn: pointer to the hypervisor connection
* @cap: capability name
* @names: array to collect the list of node device names
* @maxnames: size of @names
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Collect the list of node devices, and store their names in @names
*
* For more control over the results, see virConnectListAllNodeDevices().
*
* If the optional 'cap' argument is non-NULL, then the count
* will be restricted to devices with the specified capability
*
* Returns the number of node devices found or -1 in case of error
*/
int
virNodeListDevices(virConnectPtr conn,
const char *cap,
char **const names, int maxnames,
unsigned int flags)
{
VIR_DEBUG("conn=%p, cap=%s, names=%p, maxnames=%d, flags=%x",
conn, cap, names, maxnames, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(names, error);
virCheckNonNegativeArgGoto(maxnames, error);
if (conn->nodeDeviceDriver && conn->nodeDeviceDriver->nodeListDevices) {
int ret;
ret = conn->nodeDeviceDriver->nodeListDevices(conn, cap, names, maxnames, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virDomainQemuAttach:
* @conn: pointer to a hypervisor connection
* @pid_value: the UNIX process ID of the external QEMU process
* @flags: optional flags, currently unused
*
* This API is QEMU specific, so it will only work with hypervisor
* connections to the QEMU driver.
*
* This API will attach to an externally launched QEMU process
* identified by @pid. There are several requirements to successfully
* attach to an external QEMU process:
*
* - It must have been started with a monitor socket using the UNIX
* domain socket protocol.
* - No device hotplug/unplug, or other configuration changes can
* have been made via the monitor since it started.
* - The '-name' and '-uuid' arguments should have been set (not
* mandatory, but strongly recommended)
*
* To date, the only platforms we know of where pid_t is larger than
* unsigned int (64-bit Windows) also lack UNIX sockets, so the choice
* of @pid_value as an unsigned int should not present any difficulties.
*
* If successful, then the guest will appear in the list of running
* domains for this connection, and other APIs should operate
* normally (provided the above requirements were honored).
*
* Returns a new domain object on success, NULL otherwise
*/
virDomainPtr
virDomainQemuAttach(virConnectPtr conn,
unsigned int pid_value,
unsigned int flags)
{
pid_t pid = pid_value;
VIR_DEBUG("conn=%p, pid=%u, flags=%x", conn, pid_value, flags);
virResetLastError();
virCheckConnectReturn(conn, NULL);
virCheckPositiveArgGoto(pid_value, error);
if (pid != pid_value) {
virReportInvalidArg(pid_value,
_("pid_value in %s is too large"),
__FUNCTION__);
goto error;
}
virCheckReadOnlyGoto(conn->flags, error);
if (conn->driver->domainQemuAttach) {
virDomainPtr ret;
ret = conn->driver->domainQemuAttach(conn, pid_value, flags);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virNodeDeviceLookupSCSIHostByWWN:
* @conn: pointer to the hypervisor connection
* @wwnn: WWNN of the SCSI Host.
* @wwpn: WWPN of the SCSI Host.
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Lookup SCSI Host which is capable with 'fc_host' by its WWNN and WWPN.
*
* virNodeDeviceFree should be used to free the resources after the
* node device object is no longer needed.
*
* Returns a virNodeDevicePtr if found, NULL otherwise.
*/
virNodeDevicePtr
virNodeDeviceLookupSCSIHostByWWN(virConnectPtr conn,
const char *wwnn,
const char *wwpn,
unsigned int flags)
{
VIR_DEBUG("conn=%p, wwnn=%p, wwpn=%p, flags=%x", conn, wwnn, wwpn, flags);
virResetLastError();
virCheckConnectReturn(conn, NULL);
virCheckNonNullArgGoto(wwnn, error);
virCheckNonNullArgGoto(wwpn, error);
if (conn->nodeDeviceDriver &&
conn->nodeDeviceDriver->nodeDeviceLookupSCSIHostByWWN) {
virNodeDevicePtr ret;
ret = conn->nodeDeviceDriver->nodeDeviceLookupSCSIHostByWWN(conn, wwnn,
wwpn, flags);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virDomainQemuMonitorCommand:
* @domain: a domain object
* @cmd: the qemu monitor command string
* @result: a string returned by @cmd
* @flags: bitwise-or of supported virDomainQemuMonitorCommandFlags
*
* This API is QEMU specific, so it will only work with hypervisor
* connections to the QEMU driver.
*
* Send an arbitrary monitor command @cmd to @domain through the
* qemu monitor. There are several requirements to safely and
* successfully use this API:
*
* - A @cmd that queries state without making any modifications is safe
* - A @cmd that alters state that is also tracked by libvirt is unsafe,
* and may cause libvirtd to crash
* - A @cmd that alters state not tracked by the current version of
* libvirt is possible as a means to test new qemu features before
* they have support in libvirt, but no guarantees are made to safety
*
* If VIR_DOMAIN_QEMU_MONITOR_COMMAND_HMP is set, the command is
* considered to be a human monitor command and libvirt will automatically
* convert it into QMP if needed. In that case the @result will also
* be converted back from QMP.
*
* If successful, @result will be filled with the string output of the
* @cmd, and the caller must free this string.
*
* Returns 0 in case of success, -1 in case of failure
*
*/
int
virDomainQemuMonitorCommand(virDomainPtr domain, const char *cmd,
char **result, unsigned int flags)
{
virConnectPtr conn;
VIR_DOMAIN_DEBUG(domain, "cmd=%s, result=%p, flags=%x",
cmd, result, flags);
virResetLastError();
virCheckDomainReturn(domain, -1);
conn = domain->conn;
virCheckNonNullArgGoto(result, error);
virCheckReadOnlyGoto(conn->flags, error);
if (conn->driver->domainQemuMonitorCommand) {
int ret;
ret = conn->driver->domainQemuMonitorCommand(domain, cmd, result,
flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeDeviceListCaps:
* @dev: the device
* @names: array to collect the list of capability names
* @maxnames: size of @names
*
* Lists the names of the capabilities supported by the device.
*
* Returns the number of capability names listed in @names or -1
* in case of error.
*/
int
virNodeDeviceListCaps(virNodeDevicePtr dev,
char **const names,
int maxnames)
{
VIR_DEBUG("dev=%p, conn=%p, names=%p, maxnames=%d",
dev, dev ? dev->conn : NULL, names, maxnames);
virResetLastError();
virCheckNodeDeviceReturn(dev, -1);
virCheckNonNullArgGoto(names, error);
virCheckNonNegativeArgGoto(maxnames, error);
if (dev->conn->nodeDeviceDriver && dev->conn->nodeDeviceDriver->nodeDeviceListCaps) {
int ret;
ret = dev->conn->nodeDeviceDriver->nodeDeviceListCaps(dev, names, maxnames);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(dev->conn);
return -1;
}
/**
* virDomainSnapshotDelete:
* @snapshot: a domain snapshot object
* @flags: bitwise-OR of supported virDomainSnapshotDeleteFlags
*
* Delete the snapshot.
*
* If @flags is 0, then just this snapshot is deleted, and changes
* from this snapshot are automatically merged into children
* snapshots. If @flags includes VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN,
* then this snapshot and any descendant snapshots are deleted. If
* @flags includes VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY, then any
* descendant snapshots are deleted, but this snapshot remains. These
* two flags are mutually exclusive.
*
* If @flags includes VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY, then
* any snapshot metadata tracked by libvirt is removed while keeping
* the snapshot contents intact; if a hypervisor does not require any
* libvirt metadata to track snapshots, then this flag is silently
* ignored.
*
* Returns 0 if the selected snapshot(s) were successfully deleted,
* -1 on error.
*/
int
virDomainSnapshotDelete(virDomainSnapshotPtr snapshot,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, flags=0x%x", snapshot, flags);
virResetLastError();
virCheckDomainSnapshotReturn(snapshot, -1);
conn = snapshot->domain->conn;
virCheckReadOnlyGoto(conn->flags, error);
VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN,
VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY,
error);
if (conn->driver->domainSnapshotDelete) {
int ret = conn->driver->domainSnapshotDelete(snapshot, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeDeviceDetachFlags:
* @dev: pointer to the node device
* @driverName: name of backend driver that will be used
* for later device assignment to a domain. NULL
* means "use the hypervisor default driver"
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Detach the node device from the node itself so that it may be
* assigned to a guest domain.
*
* Depending on the hypervisor, this may involve operations such as
* unbinding any device drivers from the device, binding the device to
* a dummy device driver and resetting the device. Different backend
* drivers expect the device to be bound to different dummy
* devices. For example, QEMU's "kvm" backend driver (the default)
* expects the device to be bound to "pci-stub", but its "vfio"
* backend driver expects the device to be bound to "vfio-pci".
*
* If the device is currently in use by the node, this method may
* fail.
*
* Once the device is not assigned to any guest, it may be re-attached
* to the node using the virNodeDeviceReAttach() method.
*
* Returns 0 in case of success, -1 in case of failure.
*/
int
virNodeDeviceDetachFlags(virNodeDevicePtr dev,
const char *driverName,
unsigned int flags)
{
VIR_DEBUG("dev=%p, conn=%p driverName=%s flags=%x",
dev, dev ? dev->conn : NULL,
driverName ? driverName : "(default)", flags);
virResetLastError();
virCheckNodeDeviceReturn(dev, -1);
virCheckReadOnlyGoto(dev->conn->flags, error);
if (dev->conn->driver->nodeDeviceDetachFlags) {
int ret;
ret = dev->conn->driver->nodeDeviceDetachFlags(dev, driverName, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(dev->conn);
return -1;
}
/**
* virDomainListAllSnapshots:
* @domain: a domain object
* @snaps: pointer to variable to store the array containing snapshot objects
* or NULL if the list is not required (just returns number of
* snapshots)
* @flags: bitwise-OR of supported virDomainSnapshotListFlags
*
* Collect the list of domain snapshots for the given domain and allocate
* an array to store those objects. This API solves the race inherent in
* virDomainSnapshotListNames().
*
* If @flags contains VIR_DOMAIN_SNAPSHOT_LIST_TOPOLOGICAL and @snaps
* is non-NULL, and no other connection is modifying snapshots, then
* it is guaranteed that for any snapshot in the resulting list, no
* snapshots later in the list can be reached by a sequence of
* virDomainSnapshotGetParent() starting from that earlier snapshot;
* otherwise, the order of snapshots in the resulting list is
* unspecified.
*
* By default, this command covers all snapshots. It is also possible
* to limit things to just snapshots with no parents, when @flags
* includes VIR_DOMAIN_SNAPSHOT_LIST_ROOTS. Additional filters are
* provided in groups listed below. Within a group, bits are mutually
* exclusive, where all possible snapshots are described by exactly
* one bit from the group. Some hypervisors might reject particular
* flags where it cannot make a distinction for filtering. If the set
* of filter flags selected forms an impossible combination, the
* hypervisor may return either 0 or an error.
*
* The first group of @flags is VIR_DOMAIN_SNAPSHOT_LIST_LEAVES and
* VIR_DOMAIN_SNAPSHOT_LIST_NO_LEAVES, to filter based on snapshots that
* have no further children (a leaf snapshot).
*
* The next group of @flags is VIR_DOMAIN_SNAPSHOT_LIST_METADATA and
* VIR_DOMAIN_SNAPSHOT_LIST_NO_METADATA, for filtering snapshots based on
* whether they have metadata that would prevent the removal of the last
* reference to a domain.
*
* The next group of @flags is VIR_DOMAIN_SNAPSHOT_LIST_INACTIVE,
* VIR_DOMAIN_SNAPSHOT_LIST_ACTIVE, and VIR_DOMAIN_SNAPSHOT_LIST_DISK_ONLY,
* for filtering snapshots based on what domain state is tracked by the
* snapshot.
*
* The next group of @flags is VIR_DOMAIN_SNAPSHOT_LIST_INTERNAL and
* VIR_DOMAIN_SNAPSHOT_LIST_EXTERNAL, for filtering snapshots based on
* whether the snapshot is stored inside the disk images or as
* additional files.
*
* Returns the number of domain snapshots found or -1 and sets @snaps to
* NULL in case of error. On success, the array stored into @snaps is
* guaranteed to have an extra allocated element set to NULL but not included
* in the return count, to make iteration easier. The caller is responsible
* for calling virDomainSnapshotFree() on each array element, then calling
* free() on @snaps.
*/
int
virDomainListAllSnapshots(virDomainPtr domain, virDomainSnapshotPtr **snaps,
unsigned int flags)
{
virConnectPtr conn;
VIR_DOMAIN_DEBUG(domain, "snaps=%p, flags=0x%x", snaps, flags);
virResetLastError();
if (snaps)
*snaps = NULL;
virCheckDomainReturn(domain, -1);
conn = domain->conn;
if (conn->driver->domainListAllSnapshots) {
int ret = conn->driver->domainListAllSnapshots(domain, snaps, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeDeviceCreateXML:
* @conn: pointer to the hypervisor connection
* @xmlDesc: string containing an XML description of the device to be created
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Create a new device on the VM host machine, for example, virtual
* HBAs created using vport_create.
*
* virNodeDeviceFree should be used to free the resources after the
* node device object is no longer needed.
*
* Returns a node device object if successful, NULL in case of failure
*/
virNodeDevicePtr
virNodeDeviceCreateXML(virConnectPtr conn,
const char *xmlDesc,
unsigned int flags)
{
VIR_DEBUG("conn=%p, xmlDesc=%s, flags=%x", conn, xmlDesc, flags);
virResetLastError();
virCheckConnectReturn(conn, NULL);
virCheckReadOnlyGoto(conn->flags, error);
virCheckNonNullArgGoto(xmlDesc, error);
if (conn->nodeDeviceDriver &&
conn->nodeDeviceDriver->nodeDeviceCreateXML) {
virNodeDevicePtr dev = conn->nodeDeviceDriver->nodeDeviceCreateXML(conn, xmlDesc, flags);
if (dev == NULL)
goto error;
return dev;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virDomainSnapshotListAllChildren:
* @snapshot: a domain snapshot object
* @snaps: pointer to variable to store the array containing snapshot objects
* or NULL if the list is not required (just returns number of
* snapshots)
* @flags: bitwise-OR of supported virDomainSnapshotListFlags
*
* Collect the list of domain snapshots that are children of the given
* snapshot, and allocate an array to store those objects. This API solves
* the race inherent in virDomainSnapshotListChildrenNames().
*
* If @flags lacks VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS or contains
* VIR_DOMAIN_SNAPSHOT_LIST_TOPOLOGICAL, @snaps is non-NULL, and no
* other connection is modifying snapshots, then it is guaranteed that
* for any snapshot in the resulting list, no snapshots later in the
* list can be reached by a sequence of virDomainSnapshotGetParent()
* starting from that earlier snapshot; otherwise, the order of
* snapshots in the resulting list is unspecified.
*
* By default, this command covers only direct children. It is also
* possible to expand things to cover all descendants, when @flags
* includes VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS. Additional filters
* are provided via the remaining @flags values as documented in
* virDomainListAllSnapshots(), with the exception that
* VIR_DOMAIN_SNAPSHOT_LIST_ROOTS is not supported (in fact,
* VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS has the same bit value but
* opposite semantics of widening rather than narrowing the listing).
*
* Returns the number of domain snapshots found or -1 and sets @snaps to
* NULL in case of error. On success, the array stored into @snaps is
* guaranteed to have an extra allocated element set to NULL but not included
* in the return count, to make iteration easier. The caller is responsible
* for calling virDomainSnapshotFree() on each array element, then calling
* free() on @snaps.
*/
int
virDomainSnapshotListAllChildren(virDomainSnapshotPtr snapshot,
virDomainSnapshotPtr **snaps,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, snaps=%p, flags=0x%x", snapshot, snaps, flags);
virResetLastError();
if (snaps)
*snaps = NULL;
virCheckDomainSnapshotReturn(snapshot, -1);
conn = snapshot->domain->conn;
if (conn->driver->domainSnapshotListAllChildren) {
int ret = conn->driver->domainSnapshotListAllChildren(snapshot, snaps,
flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeDeviceDestroy:
* @dev: a device object
*
* Destroy the device object. The virtual device (only works for vHBA
* currently) is removed from the host operating system. This function
* may require privileged access.
*
* Returns 0 in case of success and -1 in case of failure.
*/
int
virNodeDeviceDestroy(virNodeDevicePtr dev)
{
VIR_DEBUG("dev=%p", dev);
virResetLastError();
virCheckNodeDeviceReturn(dev, -1);
virCheckReadOnlyGoto(dev->conn->flags, error);
if (dev->conn->nodeDeviceDriver &&
dev->conn->nodeDeviceDriver->nodeDeviceDestroy) {
int retval = dev->conn->nodeDeviceDriver->nodeDeviceDestroy(dev);
if (retval < 0) {
goto error;
}
return 0;
}
virReportUnsupportedError();
error:
virDispatchError(dev->conn);
return -1;
}
/**
* virDomainSnapshotCurrent:
* @domain: a domain object
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Get the current snapshot for a domain, if any.
*
* virDomainSnapshotFree should be used to free the resources after the
* snapshot object is no longer needed.
*
* Returns a domain snapshot object or NULL in case of failure. If the
* current domain snapshot cannot be found, then the VIR_ERR_NO_DOMAIN_SNAPSHOT
* error is raised.
*/
virDomainSnapshotPtr
virDomainSnapshotCurrent(virDomainPtr domain,
unsigned int flags)
{
virConnectPtr conn;
VIR_DOMAIN_DEBUG(domain, "flags=0x%x", flags);
virResetLastError();
virCheckDomainReturn(domain, NULL);
conn = domain->conn;
if (conn->driver->domainSnapshotCurrent) {
virDomainSnapshotPtr snap;
snap = conn->driver->domainSnapshotCurrent(domain, flags);
if (!snap)
goto error;
return snap;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
static int
cpuTestCompare(const void *arg)
{
const struct data *data = arg;
int ret = -1;
virCPUDefPtr host = NULL;
virCPUDefPtr cpu = NULL;
virCPUCompareResult result;
if (!(host = cpuTestLoadXML(data->arch, data->host)) ||
!(cpu = cpuTestLoadXML(data->arch, data->name)))
goto cleanup;
result = cpuCompare(host, cpu);
if (data->result == VIR_CPU_COMPARE_ERROR)
virResetLastError();
if (data->result != result) {
if (virTestGetVerbose()) {
fprintf(stderr, "\nExpected result %s, got %s\n",
cpuTestCompResStr(data->result),
cpuTestCompResStr(result));
/* Pad to line up with test name ... in virTestRun */
fprintf(stderr, "%74s", "... ");
}
goto cleanup;
}
ret = 0;
cleanup:
virCPUDefFree(host);
virCPUDefFree(cpu);
return ret;
}
/**
* virDomainSnapshotHasMetadata:
* @snapshot: a snapshot object
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Determine if the given snapshot is associated with libvirt metadata
* that would prevent the deletion of the domain.
*
* Returns 1 if the snapshot has metadata, 0 if the snapshot exists without
* help from libvirt, or -1 on error.
*/
int
virDomainSnapshotHasMetadata(virDomainSnapshotPtr snapshot,
unsigned int flags)
{
virConnectPtr conn;
VIR_DEBUG("snapshot=%p, flags=0x%x", snapshot, flags);
virResetLastError();
virCheckDomainSnapshotReturn(snapshot, -1);
conn = snapshot->domain->conn;
if (conn->driver->domainSnapshotHasMetadata) {
int ret;
ret = conn->driver->domainSnapshotHasMetadata(snapshot, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNetworkGetBridgeName:
* @network: a network object
*
* Provides a bridge interface name to which a domain may connect
* a network interface in order to join the network.
*
* Returns a 0 terminated interface name, or NULL in case of error.
* the caller must free() the returned value.
*/
char *
virNetworkGetBridgeName(virNetworkPtr network)
{
virConnectPtr conn;
VIR_DEBUG("network=%p", network);
virResetLastError();
virCheckNetworkReturn(network, NULL);
conn = network->conn;
if (conn->networkDriver && conn->networkDriver->networkGetBridgeName) {
char *ret;
ret = conn->networkDriver->networkGetBridgeName(network);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(network->conn);
return NULL;
}
