/*
* Bring up the timer at 100 Hz.
*/
void __init swarm_time_init(void)
{
unsigned int flags;
int status;
/* Set up the scd general purpose timer 0 to cpu 0 */
sb1250_time_init();
/* Establish communication with the Xicor 1241 RTC */
/* XXXKW how do I share the SMBus with the I2C subsystem? */
out64(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
out64(0, SMB_CSR(R_SMB_CONTROL));
if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
printk("x1241: couldn't detect on SWARM SMBus 1\n");
} else {
if (status & X1241REG_SR_RTCF)
printk("x1241: battery failed -- time is probably wrong\n");
write_lock_irqsave (&xtime_lock, flags);
xtime.tv_sec = get_swarm_time();
xtime.tv_usec = 0;
write_unlock_irqrestore(&xtime_lock, flags);
}
}
int xicor_set_time(unsigned long t)
{
struct rtc_time tm;
int tmp;
unsigned long flags;
rtc_time_to_tm(t, &tm);
tm.tm_year += 1900;
spin_lock_irqsave(&rtc_lock, flags);
/* unlock writes to the CCR */
xicor_write(X1241REG_SR, X1241REG_SR_WEL);
xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
/* trivial ones */
tm.tm_sec = bin2bcd(tm.tm_sec);
xicor_write(X1241REG_SC, tm.tm_sec);
tm.tm_min = bin2bcd(tm.tm_min);
xicor_write(X1241REG_MN, tm.tm_min);
tm.tm_mday = bin2bcd(tm.tm_mday);
xicor_write(X1241REG_DT, tm.tm_mday);
/* tm_mon starts from 0, *ick* */
tm.tm_mon ++;
tm.tm_mon = bin2bcd(tm.tm_mon);
xicor_write(X1241REG_MO, tm.tm_mon);
/* year is split */
tmp = tm.tm_year / 100;
tm.tm_year %= 100;
xicor_write(X1241REG_YR, tm.tm_year);
xicor_write(X1241REG_Y2K, tmp);
/* hour is the most tricky one */
tmp = xicor_read(X1241REG_HR);
if (tmp & X1241REG_HR_MIL) {
/* 24 hour format */
tm.tm_hour = bin2bcd(tm.tm_hour);
tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f);
} else {
/* 12 hour format, with 0x2 for pm */
tmp = tmp & ~0x3f;
if (tm.tm_hour >= 12) {
tmp |= 0x20;
tm.tm_hour -= 12;
}
tm.tm_hour = bin2bcd(tm.tm_hour);
tmp |= tm.tm_hour;
}
xicor_write(X1241REG_HR, tmp);
xicor_write(X1241REG_SR, 0);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
unsigned long xicor_get_time(void)
{
unsigned int year, mon, day, hour, min, sec, y2k;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
sec = xicor_read(X1241REG_SC);
min = xicor_read(X1241REG_MN);
hour = xicor_read(X1241REG_HR);
if (hour & X1241REG_HR_MIL) {
hour &= 0x3f;
} else {
if (hour & 0x20)
hour = (hour & 0xf) + 0x12;
}
day = xicor_read(X1241REG_DT);
mon = xicor_read(X1241REG_MO);
year = xicor_read(X1241REG_YR);
y2k = xicor_read(X1241REG_Y2K);
spin_unlock_irqrestore(&rtc_lock, flags);
sec = bcd2bin(sec);
min = bcd2bin(min);
hour = bcd2bin(hour);
day = bcd2bin(day);
mon = bcd2bin(mon);
year = bcd2bin(year);
y2k = bcd2bin(y2k);
year += (y2k * 100);
return mktime(year, mon, day, hour, min, sec);
}
static unsigned long __init get_swarm_time(void)
{
unsigned int year, mon, day, hour, min, sec, y2k;
sec = xicor_read(X1241REG_SC);
min = xicor_read(X1241REG_MN);
hour = xicor_read(X1241REG_HR);
if (hour & X1241REG_HR_MIL) {
hour &= 0x3f;
} else {
if (hour & 0x20)
hour = (hour & 0xf) + 0x12;
}
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
day = xicor_read(X1241REG_DT);
mon = xicor_read(X1241REG_MO);
year = xicor_read(X1241REG_YR);
y2k = xicor_read(X1241REG_Y2K);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
BCD_TO_BIN(y2k);
year += (y2k * 100);
return mktime(year, mon, day, hour, min, sec);
}
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
cmos_minutes = xicor_read(X1241REG_MN);
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
/* unlock writes to the CCR */
xicor_write(X1241REG_SR, X1241REG_SR_WEL);
xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
if (abs(real_minutes - cmos_minutes) < 30) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
xicor_write(X1241REG_SC, real_seconds);
xicor_write(X1241REG_MN, real_minutes);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
xicor_write(X1241REG_SR, 0);
printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
return retval;
}
int xicor_probe(void)
{
return (xicor_read(X1241REG_SC) != -1);
}